static char ali_expect_release;
static struct pci_dev *ali_pci;
static u32 ali_timeout_bits; /* stores the computed timeout */
-static spinlock_t ali_lock; /* Guards the hardware */
+static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */
/* module parameters */
static int timeout = WATCHDOG_TIMEOUT;
{
int ret;
- spin_lock_init(&ali_lock);
-
/* Check whether or not the hardware watchdog is there */
if (ali_find_watchdog() != 0) {
return -ENODEV;
static int heartbeat = DEFAULT_HEARTBEAT;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
int ret = 0, size;
struct resource *res;
- spin_lock_init(&io_lock);
-
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
/* internal variables */
static void __iomem *BASEADDR;
-static spinlock_t esb_lock; /* Guards the hardware */
+static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
static unsigned long timer_alive;
static struct pci_dev *esb_pci;
static unsigned short triggered; /* The status of the watchdog upon boot */
{
int ret;
- spin_lock_init(&esb_lock);
-
/* Check whether or not the hardware watchdog is there */
if (!esb_getdevice () || esb_pci == NULL)
return -ENODEV;
static struct platform_device *ibwdt_platform_device;
static unsigned long ibwdt_is_open;
-static spinlock_t ibwdt_lock;
+static DEFINE_SPINLOCK(ibwdt_lock);
static char expect_close;
/* Module information */
{
int res;
- spin_lock_init(&ibwdt_lock);
-
#if WDT_START != WDT_STOP
if (!request_region(WDT_STOP, 1, "IB700 WDT")) {
printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP);
static int zf_action = GEN_RESET;
static unsigned long zf_is_open;
static char zf_expect_close;
-static spinlock_t zf_lock;
-static spinlock_t zf_port_lock;
+static DEFINE_SPINLOCK(zf_lock);
+static DEFINE_SPINLOCK(zf_port_lock);
static DEFINE_TIMER(zf_timer, zf_ping, 0, 0);
static unsigned long next_heartbeat = 0;
zf_show_action(action);
- spin_lock_init(&zf_lock);
- spin_lock_init(&zf_port_lock);
-
if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){
printk(KERN_ERR "cannot reserve I/O ports at %d\n",
ZF_IOBASE);
static unsigned int timeout_sec;
static unsigned long wdt_is_open;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
static void mpc83xx_wdt_keepalive(void)
{
printk(KERN_INFO "WDT driver for MPC83xx initialized. "
"mode:%s timeout=%d (%d seconds)\n",
reset ? "reset":"interrupt", timeout, timeout_sec);
-
- spin_lock_init(&wdt_spinlock);
-
return 0;
err_unmap:
static char expect_close; /* is the close expected? */
-static spinlock_t io_lock; /* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
static int nowayout = WATCHDOG_NOWAYOUT;
{
int ret;
- spin_lock_init(&io_lock);
-
printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT);
/* request_region(io, 2, "pc87413"); */
static int nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = DEFAULT_HEARTBEAT;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
static unsigned long wdt_status;
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
int ret = 0, size;
struct resource *res;
- spin_lock_init(&io_lock);
-
if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
heartbeat = DEFAULT_HEARTBEAT;
#include <asm/system.h>
static unsigned long sbc8360_is_open;
-static spinlock_t sbc8360_lock;
+static DEFINE_SPINLOCK(sbc8360_lock);
static char expect_close;
#define PFX "sbc8360: "
goto out_noreboot;
}
- spin_lock_init(&sbc8360_lock);
res = misc_register(&sbc8360_miscdev);
if (res) {
printk(KERN_ERR PFX "failed to register misc device\n");
static int io_len = 2; /* for non plug and play */
static struct semaphore open_sem;
static char expect_close;
-static spinlock_t sc1200wdt_lock; /* io port access serialisation */
+static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */
#if defined CONFIG_PNP
static int isapnp = 1;
printk("%s\n", banner);
- spin_lock_init(&sc1200wdt_lock);
sema_init(&open_sem, 1);
#if defined CONFIG_PNP
static unsigned long next_heartbeat;
static unsigned long wdt_is_open;
static char wdt_expect_close;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
/*
* Whack the dog
{
int rc = -EBUSY;
- spin_lock_init(&wdt_spinlock);
-
/* Check that the timeout value is within it's range ; if not reset to the default */
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
static char expect_close; /* is the close expected? */
-static spinlock_t io_lock; /* to guard the watchdog from io races */
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
static int nowayout = WATCHDOG_NOWAYOUT;
{
int ret;
- spin_lock_init(&io_lock);
-
printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
static unsigned long wdt_is_open;
static char expect_close;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2E;
{
int ret;
- spin_lock_init(&io_lock);
-
printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O chip initialising.\n");
if (wdt_set_heartbeat(timeout)) {
static unsigned long wdt_is_open;
static char expect_close;
-static spinlock_t io_lock;
+static DEFINE_SPINLOCK(io_lock);
/* You must set this - there is no sane way to probe for this board. */
static int wdt_io = 0x2e;
{
int ret, i, found = 0;
- spin_lock_init(&io_lock);
-
printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n");
if (wdt_io == 0) {
static unsigned long next_heartbeat;
static unsigned long wdt_is_open;
static char wdt_expect_close;
-static spinlock_t wdt_spinlock;
+static DEFINE_SPINLOCK(wdt_spinlock);
/*
* Whack the dog
{
int rc = -EBUSY;
- spin_lock_init(&wdt_spinlock);
-
if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */
{
timeout = WATCHDOG_TIMEOUT;
static unsigned long timer_alive;
static int testmode;
static char expect_close;
-static spinlock_t spinlock;
+static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
printk(KERN_INFO PFX DRIVER_VERSION);
- spin_lock_init(&spinlock);
-
/*
* Check that the timeout value is within it's range ;
* if not reset to the default
static unsigned long wafwdt_is_open;
static char expect_close;
-static spinlock_t wafwdt_lock;
+static DEFINE_SPINLOCK(wafwdt_lock);
/*
* You must set these - there is no sane way to probe for this board.
printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
- spin_lock_init(&wafwdt_lock);
-
if (timeout < 1 || timeout > 255) {
timeout = WD_TIMO;
printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
static unsigned long timer_alive;
static int testmode;
static char expect_close;
-static spinlock_t spinlock;
+static DEFINE_SPINLOCK(spinlock);
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
printk(KERN_INFO PFX DRIVER_VERSION);
- spin_lock_init(&spinlock);
-
/* Check that the timeout value is within it's range ; if not reset to the default */
if (wdt977_set_timeout(timeout))
{
static int dev_count;
static struct semaphore open_sem;
-static spinlock_t wdtpci_lock;
+static DEFINE_SPINLOCK(wdtpci_lock);
static char expect_close;
static int io;
}
sema_init(&open_sem, 1);
- spin_lock_init(&wdtpci_lock);
irq = dev->irq;
io = pci_resource_start (dev, 2);