ramips: fix cpu clock of mt7621 and add dt clk devices

For a long time the mt7621 uses a fixed cpu clock which causes a problem
if the cpu frequency is not 880MHz.

This patch fixes the cpu clock calculation and adds the cpu/bus clkdev
which will be used in dts.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index ee86d0c3c51662bf8e3d626f0e7e4e7473b8464f..89f3f6fe2d14909a8b86208320ed53bbe09cb6ed 100644 (file)
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -1,4 +1,5 @@
 #include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/clock/mt7621-clk.h>
 
 / {
        #address-cells = <1>;
@@ -33,6 +34,13 @@
                serial0 = &uartlite;
        };
 
+       pll: pll {
+               compatible = "mediatek,mt7621-pll", "syscon";
+
+               #clock-cells = <1>;
+               clock-output-names = "cpu", "bus";
+       };
+
        cpuclock: cpuclock {
                #clock-cells = <0>;
                compatible = "fixed-clock";

diff --git a/target/linux/ramips/patches-4.14/101-mt7621-timer.patch b/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
index 5bbe137f1eb01cadf43a265494fe71471a4081b8..c7c4a40f97668765f2bd2ccbde90c599b3ee9e9d 100644 (file)
--- a/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
+++ b/target/linux/ramips/patches-4.14/101-mt7621-timer.patch
@@ -85,22 +85,3 @@
  endchoice
  
  choice
---- a/arch/mips/ralink/timer-gic.c
-+++ b/arch/mips/ralink/timer-gic.c
-@@ -12,6 +12,7 @@
- #include <linux/of.h>
- #include <linux/clk-provider.h>
- #include <linux/clocksource.h>
-+#include <asm/time.h>
- 
- #include "common.h"
- 
-@@ -19,6 +20,8 @@ void __init plat_time_init(void)
- {
-       ralink_of_remap();
- 
-+      mips_hpt_frequency = 880000000 / 2;
-+
-       of_clk_init(NULL);
-       timer_probe();
- }

diff --git a/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch
new file mode 100644 (file)
index 0000000..67062d1
--- /dev/null
+++ b/target/linux/ramips/patches-4.14/102-mt7621-fix-cpu-clk-add-clkdev.patch
@@ -0,0 +1,224 @@
+--- a/arch/mips/include/asm/mach-ralink/mt7621.h
++++ b/arch/mips/include/asm/mach-ralink/mt7621.h
+@@ -19,6 +19,10 @@
+ #define SYSC_REG_CHIP_REV             0x0c
+ #define SYSC_REG_SYSTEM_CONFIG0               0x10
+ #define SYSC_REG_SYSTEM_CONFIG1               0x14
++#define SYSC_REG_CLKCFG0              0x2c
++#define SYSC_REG_CUR_CLK_STS          0x44
++
++#define MEMC_REG_CPU_PLL              0x648
+ 
+ #define CHIP_REV_PKG_MASK             0x1
+ #define CHIP_REV_PKG_SHIFT            16
+@@ -26,6 +30,22 @@
+ #define CHIP_REV_VER_SHIFT            8
+ #define CHIP_REV_ECO_MASK             0xf
+ 
++#define XTAL_MODE_SEL_MASK            0x7
++#define XTAL_MODE_SEL_SHIFT           6
++
++#define CPU_CLK_SEL_MASK              0x3
++#define CPU_CLK_SEL_SHIFT             30
++
++#define CUR_CPU_FDIV_MASK             0x1f
++#define CUR_CPU_FDIV_SHIFT            8
++#define CUR_CPU_FFRAC_MASK            0x1f
++#define CUR_CPU_FFRAC_SHIFT           0
++
++#define CPU_PLL_PREDIV_MASK           0x3
++#define CPU_PLL_PREDIV_SHIFT          12
++#define CPU_PLL_FBDIV_MASK            0x7f
++#define CPU_PLL_FBDIV_SHIFT           4
++
+ #define MT7621_DRAM_BASE                0x0
+ #define MT7621_DDR2_SIZE_MIN          32
+ #define MT7621_DDR2_SIZE_MAX          256
+--- a/arch/mips/ralink/mt7621.c
++++ b/arch/mips/ralink/mt7621.c
+@@ -10,6 +10,10 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/jiffies.h>
++#include <linux/clk.h>
++#include <linux/clkdev.h>
++#include <linux/clk-provider.h>
++#include <dt-bindings/clock/mt7621-clk.h>
+ 
+ #include <asm/mipsregs.h>
+ #include <asm/smp-ops.h>
+@@ -18,16 +22,12 @@
+ #include <asm/mach-ralink/mt7621.h>
+ #include <asm/mips-boards/launch.h>
+ #include <asm/delay.h>
++#include <asm/time.h>
+ 
+ #include <pinmux.h>
+ 
+ #include "common.h"
+ 
+-#define SYSC_REG_SYSCFG               0x10
+-#define SYSC_REG_CPLL_CLKCFG0 0x2c
+-#define SYSC_REG_CUR_CLK_STS  0x44
+-#define CPU_CLK_SEL           (BIT(30) | BIT(31))
+-
+ #define MT7621_GPIO_MODE_UART1                1
+ #define MT7621_GPIO_MODE_I2C          2
+ #define MT7621_GPIO_MODE_UART3_MASK   0x3
+@@ -113,49 +113,89 @@ static struct rt2880_pmx_group mt7621_pi
+       { 0 }
+ };
+ 
++static struct clk *clks[MT7621_CLK_MAX];
++static struct clk_onecell_data clk_data = {
++      .clks = clks,
++      .clk_num = ARRAY_SIZE(clks),
++};
++
+ phys_addr_t mips_cpc_default_phys_base(void)
+ {
+       panic("Cannot detect cpc address");
+ }
+ 
+-void __init ralink_clk_init(void)
++static struct clk *__init mt7621_add_sys_clkdev(
++      const char *id, unsigned long rate)
+ {
+-      int cpu_fdiv = 0;
+-      int cpu_ffrac = 0;
+-      int fbdiv = 0;
+-      u32 clk_sts, syscfg;
+-      u8 clk_sel = 0, xtal_mode;
+-      u32 cpu_clk;
++      struct clk *clk;
++      int err;
++
++      clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
++      if (IS_ERR(clk))
++              panic("failed to allocate %s clock structure", id);
++
++      err = clk_register_clkdev(clk, id, NULL);
++      if (err)
++              panic("unable to register %s clock device", id);
+ 
+-      if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+-              clk_sel = 1;
++      return clk;
++}
++
++void __init ralink_clk_init(void)
++{
++      u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac;
++      u32 pll, prediv, fbdiv;
++      u32 xtal_clk, cpu_clk, bus_clk;
++      const static u32 prediv_tbl[] = {0, 1, 2, 2};
++
++      syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
++      xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
++
++      clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0);
++      clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
++
++      curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
++      ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
++      ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
++
++      if (xtal_sel <= 2)
++              xtal_clk = 20 * 1000 * 1000;
++      else if (xtal_sel <= 5)
++              xtal_clk = 40 * 1000 * 1000;
++      else
++              xtal_clk = 25 * 1000 * 1000;
+ 
+       switch (clk_sel) {
+       case 0:
+-              clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+-              cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+-              cpu_ffrac = (clk_sts & 0x1F);
+-              cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
++              cpu_clk = 500 * 1000 * 1000;
+               break;
+-
+       case 1:
+-              fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+-              syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+-              xtal_mode = (syscfg >> 6) & 0x7;
+-              if (xtal_mode >= 6) {
+-                      /* 25Mhz Xtal */
+-                      cpu_clk = 25 * fbdiv * 1000 * 1000;
+-              } else if (xtal_mode >= 3) {
+-                      /* 40Mhz Xtal */
+-                      cpu_clk = 40 * fbdiv * 1000 * 1000;
+-              } else {
+-                      /* 20Mhz Xtal */
+-                      cpu_clk = 20 * fbdiv * 1000 * 1000;
+-              }
++              pll = rt_memc_r32(MEMC_REG_CPU_PLL);
++              fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
++              prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
++              cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
+               break;
++      default:
++              cpu_clk = xtal_clk;
+       }
++
++      cpu_clk = cpu_clk / ffiv * ffrac;
++      bus_clk = cpu_clk / 4;
++
++      clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk);
++      clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk);
++
++      pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000);
++      mips_hpt_frequency = cpu_clk / 2;
+ }
+ 
++static void __init mt7621_clocks_init_dt(struct device_node *np)
++{
++      of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
++}
++
++CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt);
++
+ void __init ralink_of_remap(void)
+ {
+       rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+--- a/arch/mips/ralink/timer-gic.c
++++ b/arch/mips/ralink/timer-gic.c
+@@ -11,14 +11,14 @@
+ 
+ #include <linux/of.h>
+ #include <linux/clk-provider.h>
+-#include <linux/clocksource.h>
++#include <asm/time.h>
+ 
+ #include "common.h"
+ 
+ void __init plat_time_init(void)
+ {
+       ralink_of_remap();
+-
++      ralink_clk_init();
+       of_clk_init(NULL);
+       timer_probe();
+ }
+--- a/include/dt-bindings/clock/mt7621-clk.h
++++ b/include/dt-bindings/clock/mt7621-clk.h
+@@ -0,0 +1,18 @@
++/*
++ * Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef __DT_BINDINGS_MT7621_CLK_H
++#define __DT_BINDINGS_MT7621_CLK_H
++
++#define MT7621_CLK_CPU                0
++#define MT7621_CLK_BUS                1
++
++#define MT7621_CLK_MAX                2
++
++#endif /* __DT_BINDINGS_MT7621_CLK_H */