--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "glinet,gl-s200", "qca,qca9531";
+ model = "GL.iNet GL-S200";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ linux,input-type = <EV_KEY>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ switch {
+ label = "switch";
+ linux,code = <KEY_SETUP>;
+ linux,input-type = <EV_SW>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue_led {
+ label = "gl-s200:blue";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ white_led {
+ label = "gl-s200:white";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ orange_led {
+ label = "gl-s200:orange";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ gpio_zigbee_reset {
+ gpio-export,name = "gpio1";
+ gpio-export,output = <1>;
+ gpio-export,direction_may_change;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_zwave_reset {
+ gpio-export,name = "gpio2";
+ gpio-export,output = <1>;
+ gpio-export,direction_may_change;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_zigbee_upgrade {
+ gpio-export,name = "gpio11";
+ gpio-export,output = <1>;
+ gpio-export,direction_may_change;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_zwave_upgrade {
+ gpio-export,name = "gpio17";
+ gpio-export,output = <1>;
+ gpio-export,direction_may_change;
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio {
+ ngpios = <17>;
+ gpio-line-names =
+ "","reset-zigbee","reset-zwave","reset",
+ "LED-orange","","","","","","",
+ "upgrade-zigbee","LED-white","LED-blue",
+ "switch","","","upgrade-zwave";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ nor_partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_wan_lan: macaddr@0 {
+ compatible = "mac-base";
+ reg = <0x0 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ calibration_art_1000: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
+ };
+ };
+ };
+ };
+
+ flash_nand: flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+
+ nand_partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand_ubi: partition@0 {
+ label = "ubi";
+ reg = <0x000000 0x8000000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ nvmem-cells = <&macaddr_wan_lan 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+ð1 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_wan_lan 1>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+ status = "okay";
+ nvmem-cells = <&calibration_art_1000>;
+ nvmem-cell-names = "calibration";
+};
endef
TARGET_DEVICES += glinet_gl-e750
+define Device/glinet_gl-s200-common
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-S200
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-ch341
+ SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
+endef
+
+define Device/glinet_gl-s200-nor
+ $(Device/glinet_gl-s200-common)
+ DEVICE_VARIANT := NOR
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += glinet_gl-s200-nor
+
+define Device/glinet_gl-s200-nor-nand
+ $(Device/glinet_gl-s200-common)
+ DEVICE_VARIANT := NOR/NAND
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+ IMAGES += factory.img
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
+endef
+TARGET_DEVICES += glinet_gl-s200-nor-nand
+
define Device/glinet_gl-xe300
SOC := qca9531
DEVICE_VENDOR := GL.iNet