Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
- endif # ARCH_MX50_SUPPORTED
-
- if ARCH_MX51
comment "i.MX51 machines:"
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
- endif # ARCH_MX51
-
- if ARCH_MX53_SUPPORTED
comment "i.MX53 machines:"
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
.num_leds = ARRAY_SIZE(mx53loco_leds),
};
+void __init imx53_qsb_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+ ARRAY_SIZE(mx53_loco_pads));
+}
+
+ static struct i2c_board_info mx53loco_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mma8450", 0x1C),
+ },
+ };
+
static void __init mx53_loco_board_init(void)
{
+ int ret;
imx53_soc_init();
+ imx53_qsb_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
.bitrate = 100000,
};
+ static inline void mx53_smd_ahci_pwr_on(void)
+ {
+ int ret;
+
+ /* Enable SATA PWR */
+ ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+ GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+ if (ret) {
+ pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+ return;
+ }
+ }
+
+void __init imx53_smd_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
+ ARRAY_SIZE(mx53_smd_pads));
+}
+
static void __init mx53_smd_board_init(void)
{
imx53_soc_init();
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
- extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
+ enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+ };
+
+ extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+ extern void (*imx_idle)(void);
+ extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+ void avic_handle_irq(struct pt_regs *);
+ void tzic_handle_irq(struct pt_regs *);
+
+ #define imx1_handle_irq avic_handle_irq
+ #define imx21_handle_irq avic_handle_irq
+ #define imx25_handle_irq avic_handle_irq
+ #define imx27_handle_irq avic_handle_irq
+ #define imx31_handle_irq avic_handle_irq
+ #define imx35_handle_irq avic_handle_irq
+ #define imx50_handle_irq tzic_handle_irq
+ #define imx51_handle_irq tzic_handle_irq
+ #define imx53_handle_irq tzic_handle_irq
+
+extern void imx51_babbage_common_init(void);
+extern void imx53_ard_common_init(void);
+extern void imx53_evk_common_init(void);
+extern void imx53_qsb_common_init(void);
+extern void imx53_smd_common_init(void);
#endif