add D-link DVA-G3810BN-TL-1 support

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32893

diff --git a/target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch
new file mode 100644 (file)
index 0000000..d2f91df
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/555-board_dva-g3810bn-tl-1.patch
@@ -0,0 +1,82 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2538,6 +2538,71 @@ static struct board_info __initdata boar
+               },
+       }
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++      .name                   = "DVAG3810BN",
++      .expected_cpu_id        = 0x6358,
++
++      .has_uart0              = 1,
++      .has_enet0              = 1,
++      .has_enet1              = 1,
++      .has_pci                = 1,
++
++      .enet0 = {
++              .has_phy                = 0,
++              .use_internal_phy       = 1,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0              = 1,
++      .has_pccard             = 1,
++      .has_ehci0              = 1,
++
++      .leds = {
++              {
++                      .name   = "DVAG3810BN::voip",
++                      .gpio   = 1,
++              },
++              {
++                      .name   = "DVAG3810BN::dsl",
++                      .gpio   = 22,
++                      .active_low  = 1,
++              },
++              {
++                      .name   = "DVAG3810BN::internet",
++                      .gpio   = 23,
++                      .active_low  = 1,
++              },
++              {
++                      .name   = "DVAG3810BN::power",
++                      .gpio   = 4,
++                      .default_trigger = "default-on",
++              },
++              {
++                      .name   = "DVAG3810BN::stop",
++                      .gpio   = 5,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc   = "reset",
++                      .gpio   = 34,
++                      .active_low = 1,
++                      .type   = EV_KEY,
++                      .code   = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -2735,6 +2800,7 @@ static const struct board_info __initdat
+       &board_ct6373_1,
+       &board_HW553,
+       &board_spw303v,
++      &board_DVAG3810BN,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368

diff --git a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
index c06fce4bce574e12a7b9bde7a027c70165aca96a..5794fa72e624dc545faf8d97fce7766c0162dfb8 100644 (file)
--- a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -2765,7 +2766,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2831,7 +2832,7 @@ static void __init nb4_nvram_fixup(void)
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
        .revision               = 0x02,
        .board_rev              = 0x17,
        .country_code           = 0x0,
-@@ -2785,6 +2786,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2851,6 +2852,7 @@ static struct ssb_sprom bcm63xx_sprom =
        .boardflags_lo          = 0x2848,
        .boardflags_hi          = 0x0000,
  };