This renames lantiq DTS(I) files to follow soc_vendor_device scheme.
This will make DTS files easier to maintain.
As a side effect, DTS file name can be derived from device node
names now, only having to specify a SOC variable in Makefiles.
While at it, move files to arch/mips/boot/dts/lantiq subfolder.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
- compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
- model = "AudioCodes MediaPack MP-252";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- };
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "uboot_env";
- reg = <0x20000 0x20000>;
- };
-
- partition@40000 {
- label = "boardconfig";
- reg = <0x40000 0x60000>;
- read-only;
- };
-
- partition@a0000 {
- label = "firmware";
- reg = <0xa0000 0xf20000>;
- };
-
- partition@fc0000 {
- label = "sysconfig";
- reg = <0xfc0000 0x40000>;
- };
-
- partition@1000000 {
- label = "rootfs_data";
- reg = <0x1000000 0x1000000>;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "amazonse.dtsi"
-
-/ {
- compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
- model = "Allnet ALL0333CJ DSL Modem";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &online_green;
- };
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x1000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* power led: red=off, green=on */
- power: power {
- label = "all0333cj:green:power";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- lan: lan {
- label = "all0333cj:green:lan";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- dsl: dsl {
- label = "all0333cj:green:dsl";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- online_green: online {
- label = "all0333cj:green:online";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- online_red {
- label = "all0333cj:red:online";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- keys_in {
- lantiq,pins = "io0",/* "io25", */"io29";
- lantiq,pull = <2>;
- lantiq,open-drain = <1>;
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x400000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "firmware";
- reg = <0x10000 0x3ef200>;
- };
-
- partition@3ff200 {
- label = "uboot_env";
- reg = <0x3ff200 0xc00>;
- read-only;
- };
-
- partition@3ffe00 {
- label = "dummy_bits";
- reg = <0x3ffe00 0x200>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
- model = "Wippies, Elisa";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power2;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &adsl;
- led-internet = &internet;
- led-usb = &led_usb;
- led-usb2 = &led_usb2;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "power";
- gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- power2: power2 {
- label = "power2";
- gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
- };
- lan1 {
- label = "lan1";
- gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
- };
- lan2 {
- label = "lan2";
- gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
- };
- lan3 {
- label = "lan3";
- gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
- };
- lan4 {
- label = "lan4";
- gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
- };
- wifi: wifi {
- label = "wifi";
- gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
- };
- adsl: adsl {
- label = "adsl";
- gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
- };
- internet: internet {
- label = "internet";
- gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
- };
- internet2 {
- label = "internet2";
- gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
- };
- voip {
- label = "voip";
- gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
- };
- phone {
- label = "phone";
- gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
- };
- phone2 {
- label = "phone2";
- gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
- };
- led_usb: usb {
- label = "usb";
- gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
- };
- led_usb2: usb2 {
- label = "usb2";
- gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
- };
- usb3 {
- label = "usb3";
- gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
- };
- unlabeled {
- label = "unlabeled";
- gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu a23";
- lantiq,function = "ebu";
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- exin {
- lantiq,groups = "exin1", "exin2";
- lantiq,function = "exin";
- lantiq,output = <0>;
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- buttons {
- lantiq,pins = "io3", "io14";
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- };
-};
-
-&gpios {
- status = "okay";
- lantiq,groups = <0x7>;
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
-
- lantiq,noxip;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0xfa0000>;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
- <&pci_req1_pins>, <&pci_req2_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- interrupt-map = <
- 0x6000 0 0 1 &icu0 135
- 0x7800 0 0 1 &icu0 66
- 0x7800 0 0 2 &icu0 66
- 0x7800 0 0 3 &icu0 66
- >;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0x7>;
-};
-
-&vmmc {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ARV4518PWR01.dtsi"
-
-/ {
- compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
- model = "SMC7908A-ISP";
-};
+++ /dev/null
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &online;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- ath5k_eep {
- compatible = "ath5k,eeprom";
- ath,eep-flash = <&boardconfig 0x400>;
- ath,mac-offset = <0x16>;
- ath,mac-increment = <1>;
- ath,eep-swap;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "power";
- gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- online: online {
- label = "online";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "wifi";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- dsl2 {
- label = "dsl2";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "usb";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "voice";
- gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "fxs1";
- gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "fxs2";
- gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
- };
- fxo {
- label = "fxo";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>; /* 64 KB */
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>; /* 64 KB */
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- boardconfig: partition@400000 {
- label = "boardconfig";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x0>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
- <&pci_req1_pins>, <&pci_req2_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0xf>;
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ARV4518PWR01.dtsi"
-
-/ {
- compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
- model = "SMC7908A-ISP, Airties WAV-221";
-};
-
-&pci0 {
- lantiq,external-clock;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
- model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &internet_green;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power {
- label = "arv4519pw:green:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power2 {
- label = "arv4519pw:red:power";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv4519pw:green:wlan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "arv4519pw:green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- internet_green: online {
- label = "arv4519pw:green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "arv4519pw:red:internet";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "arv4519pw:green:usb";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- voip {
- label = "arv4519pw:green:voip";
- gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "arv4519pw:green:phone1";
- gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "arv4519pw:green:phone2";
- gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
- };
- fxo {
- label = "arv4519pw:green:line";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "arv4519pw:green:wps";
- gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "arv4519pw:orange:wps";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- wps3 {
- label = "arv4519pw:red:wps";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- boardconfig: partition@3f0000 {
- label = "boardconfig";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x400>;
- };
-};
-
-&pci0 {
- status = "okay";
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0xf>;
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
- model = "Easybox 800, WAV-281";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_blue;
- led-failsafe = &power_red;
- led-running = &power_blue;
- led-upgrade = &power_blue;
-
- led-dsl = &dsl;
- led-internet = &internet_blue;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "wps";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_blue: power {
- label = "arv4520pw:blue:power";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "arv4520pw:blue:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- internet_blue: internet {
- label = "arv4520pw:blue:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- power_red: power2 {
- label = "arv4520pw:red:power";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "arv4520pw:yellow:wps";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "arv4520pw:red:wps";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- /*
- wps green is missing
- */
- fxs1 {
- label = "arv4520pw:blue:telefon1";
- gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "arv4520pw:blue:telefon2";
- gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
- };
- isdn {
- label = "arv4520pw:blue:isdn";
- gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
- };
- fxo {
- label = "arv4520pw:blue:line";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "arv4520pw:blue:sprache";
- gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "arv4520pw:blue:usb";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv4520pw:blue:wifi";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- internet2 {
- label = "arv4520pw:red:internet";
- gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
- };
- /*
- info is missing
- */
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- };
-};
-
-&gsw {
- /* gpiomm 10 - switch */
- phy-mode = "rmii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "uboot_env";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- partition@30000 {
- label = "firmware";
- reg = <0x30000 0x3c0000>;
- };
-
- boardconfig: partition@7f0000 {
- label = "boardconfig";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x400>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH
- &gpiomm 7 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
- model = "Speedport W501V Typ A";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- /* we dont have a power led, lets use the online led */
- led-boot = &online;
- led-failsafe = &online;
-
- led-dsl = &dsl;
- led-internet = &online;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- ath5k_eep {
- compatible = "ath5k,eeprom";
- ath,eep-flash = <&boardconfig 0x400>;
- ath,mac-offset = <0x0>;
- ath,eep-swap;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- fxo {
- label = "arv4525pw:green:festnetz";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- fxs {
- label = "arv4525pw:green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "arv4525pw:green:t-dsl";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv4525pw:green:wlan";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- online: online {
- label = "arv4525pw:green:online";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- relay {
- lantiq,pins = "io31";
- lantiq,output = <1>;
- };
- };
-};
-
-/* #define ARV4525PW_PHYRESET 13 */
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- boardconfig: partition@400000 {
- label = "boardconfig";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-/* #define ARV4525PW_RELAY 31 */
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
- model = "Arcor 801";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_blue;
- led-failsafe = &power_red;
- led-running = &power_blue;
- led-upgrade = &power_blue;
-
- led-dsl = &dsl_blue;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- ath5k_eep {
- compatible = "ath5k,eeprom";
- ath,eep-flash = <&boardconfig 0x400>;
- ath,mac-offset = <0x0>;
- ath,eep-swap;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power_blue: power0 {
- label = "arv452cqw:blue:power";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl_blue: dsl {
- label = "arv452cqw:blue:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- isdn {
- label = "arv452cqw:blue:isdn";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- power_red: power1 {
- label = "arv452cqw:red:power";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "arv452cqw:blue:wps";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- wps1 {
- label = "arv452cqw:yellow:wps";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "arv452cqw:blue:telefon1";
- gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "arv452cqw:blue:telefon2";
- gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "arv452cqw:red:wps";
- gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
- };
- fxo {
- label = "arv452cqw:blue:line";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "arv452cqw:blue:sprache";
- gpios = <&gpiomm 4 1>;
- };
- led_usb: usb {
- label = "arv452cqw:blue:usb";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv452cqw:blue:wlan";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- /*
- internet blue and internet red are missing
- dsl2 and dsl3 are not referenced in manual
- */
- dsl2 {
- label = "arv452cqw:yellow:dsl";
- gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
- };
- dsl3 {
- label = "arv452cqw:red:dsl";
- gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- leds {
- lantiq,pins = "io3", "io5", "io6", "io7", "io9";
- lantiq,output = <1>;
- };
- };
-};
-
-/*
-#define ARV452CPW_SWITCH_RESET 110
-*/
-&gsw {
- phy-mode = "rmii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x400000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- boardconfig: partition@3f0000 {
- label = "boardconfig";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x77f>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH
- &gpiomm 7 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
- model = "Alice/O2 IAD 4421";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power_red;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &internet;
- led-wifi = &wlan;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- wlan: wlan {
- label = "arv7506pw11:green:wlan";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
- power: power {
- label = "arv7506pw11:green:power";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "arv7506pw11:green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- internet: internet {
- label = "arv7506pw11:green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- power_red: power_red {
- label = "arv7506pw11:red:power";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- internet_red {
- label = "arv7506pw11:red:internet";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- info {
- label = "arv7506pw11:green:info";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- telefon {
- label = "arv7506pw11:green:telefon";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- info_red {
- label = "arv7506pw11:red:info";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- };
-};
-
-/* GPIO 19: switch reset */
-&gsw {
- phy-mode = "rmii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7a0000>;
- };
-
- boardconfig: partition@7f0000 {
- label = "board_config";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@1814,3592 {
- compatible = "pci1814,3592";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
- model = "Astoria Networks ARV7510PW22";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &internet;
- led-usb = &umts;
- led-wifi = &wlan;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- restart {
- label = "restart";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- internet: internet {
- label = "internet";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- wlan: wlan {
- label = "wlan";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
- umts: 3g {
- label = "3g";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- message {
- label = "message";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- pins_out {
- lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
- lantiq,output = <1>;
- };
- pins_in {
- lantiq,pins = "io11", "io12", "io28";
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gsw {
- /* Switch reset 19 */
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0xf80000>;
- };
-
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 30
- 0x7800 0 0 1 &icu0 135
- 0x7800 0 0 2 &icu0 135
- 0x7800 0 0 3 &icu0 135
- >;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0x3>;
-
- wifi@1814,3592 {
- compatible = "pci1814,3592";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
- model = "Astoria Networks ARV7518PW";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &online_green;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power_green: power {
- label = "arv7518pw:green:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "arv7518pw:green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- online_green: online {
- label = "arv7518pw:green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv7518pw:green:wlan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- power_red: power2 {
- label = "arv7518pw:red:power";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "arv7518pw:red:internet";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "arv7518pw:green:usb";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "arv7518pw:green:voip";
- gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "arv7518pw:green:phone1";
- gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "arv7518pw:green:phone2";
- gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
- };
- unlabeled {
- label = "arv7518pw:amber:unlabeled";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "arv7518pw:amber:wps";
- gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "arv7518pw:green:wps";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- wps3 {
- label = "arv7518pw:red:wps";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- leds {
- lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
- lantiq,output = <1>;
- };
- keys {
- lantiq,pins = "io28", "io30";
- lantiq,output = <0>;
- lantiq,pull = <2>;
- lantiq,open-drain = <1>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-/*
-#define SWITCH_RESET 13
-*/
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- boardconfig: partition@400000 {
- label = "boardconfig";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x0>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- lantiq,external-clock;
- req-mask = <0xf>;
-
- wifi@168c,0029 {
- compatible = "pci168c,0029";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
- model = "Astoria Networks ARV7519PW";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power2;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &online;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power2: power2 {
- label = "power2";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- online: online {
- label = "online";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "online2";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "wifi";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- wifi2 {
- label = "wifi2";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
- wifi3 {
- label = "wifi3";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "voice";
- gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "wps2";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- wps3 {
- label = "wps3";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- lan {
- label = "lan";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- tv {
- label = "tv";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- upgrade {
- label = "upgrade";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- /* is there another way to "reserve" the GPIO? */
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- switch {
- gpio-export,name = "switch";
- gpio-export,output = <1>;
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- switch_rst {
- lantiq,pins = "io19";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0xf80000>;
- };
-
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0xf>;
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-/* warning: passive port only works with active devices */
-&usb {
- status = "okay";
-};
-
-&vmmc {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
- model = "Orange Livebox 2.1";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_green;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &internet_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- rfkill {
- label = "rfkill";
- gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan_green {
- label = "arv7519rw22:green:lan";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
- internet_red {
- label = "arv7519rw22:red:internet";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
- power_green: power_green {
- label = "arv7519rw22:green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- alarm_blue {
- label = "arv7519rw22:blue:alarm";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- internet_orange {
- label = "arv7519rw22:orange:internet";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- internet_green: internet_green {
- label = "arv7519rw22:green:internet";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- };
- voice_green {
- label = "arv7519rw22:green:voice";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pcie-rst {
- lantiq,pins = "io21";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x60000>;
- read-only;
- };
-
- partition@60000 {
- label = "uboot-env";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- label = "firmware";
- reg = <0x80000 0x1f00000>;
- };
-
- boardconfig: partition@1f80000 {
- label = "boardconfig";
- reg = <0x1f80000 0x80000>;
- read-only;
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
- model = "Speedport W303V Typ A";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &power_green;
- led-internet = &online;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power_green: power {
- label = "arv7525pw:green:power";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power1 {
- label = "arv7525pw:red:power";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- online: online {
- label = "arv7525pw:green:online";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "arv7525pw:green:telefonie";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- voice2 {
- label = "arv7525pw:red:telefonie";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv7525pw:green:wlan";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- boardconfig: partition@400000 {
- label = "board_config";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- };
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
- model = "Arcor 802";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_red;
- led-failsafe = &power_blue;
- led-running = &power_red;
- led-upgrade = &power_red;
-
- led-dsl = &internet_red;
- led-usb = &umts;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- restart {
- label = "restart";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
- dsl {
- label = "dsl";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power_blue: power1 {
- label = "arv752dpw:blue:power";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- internet_red: internet {
- label = "arv752dpw:red:internet";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- message {
- label = "arv752dpw:red:message";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- power_red: power {
- label = "arv752dpw:red:power";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- voice1 {
- label = "arv752dpw:red:voice";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- umts: umts {
- label = "arv752dpw:red:umts";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv752dpw:red:wifi";
- gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "arv752dpw:green:tae-n";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "arv752dpw:green:tae-u";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- fxo {
- label = "arv752dpw:green:isdn";
- gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
- };
- internet2 {
- label = "arv752dpw:blue:internet";
- gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
- };
- voice2 {
- label = "arv752dpw:blue:voice";
- gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- leds {
- lantiq,pins = "io3", "io5", "io6", "io8";
- lantiq,output = <1>;
- lantiq,pull = <0>;
- };
- keys {
- lantiq,pins = "io11", "io12", "io13", "io28";
- lantiq,output = <0>;
- lantiq,pull = <2>;
- lantiq,open-drain = <1>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gsw {
- phy-mode = "rmii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- boardconfig: partition@7f0000 {
- label = "board_config";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x3>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- interrupt-map = <0x7000 0 0 1 &icu0 135>;
- req-mask = <0x3>;
-
- wifi@1814,0601 {
- compatible = "pci1814,0601";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
- model = "Arcor 803";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_red;
- led-failsafe = &power_blue;
- led-running = &power_red;
- led-upgrade = &power_red;
-
- led-dsl = &internet_red;
- led-usb = &umts;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- restart {
- label = "restart";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
- dsl {
- label = "dsl";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power_blue: power1 {
- label = "arv752dpw22:blue:power";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- internet_red: internet {
- label = "arv752dpw22:red:internet";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- message {
- label = "arv752dpw22:red:message";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- power_red: power {
- label = "arv752dpw22:red:power";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- voice1 {
- label = "arv752dpw22:red:voice";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- umts: umts {
- label = "arv752dpw22:red:umts";
- gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "arv752dpw22:red:wifi";
- gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
- };
- fxs1 {
- label = "arv752dpw22:green:tae-n";
- gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
- };
- fxs2 {
- label = "arv752dpw22:green:tae-u";
- gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
- };
- fxo {
- label = "arv752dpw22:green:isdn";
- gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
- };
- internet2 {
- label = "arv752dpw22:blue:internet";
- gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
- };
- voice2 {
- label = "arv752dpw22:blue:voice";
- gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
- };
- eth1 {
- label = "arv752dpw22:green:lan1";
- gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
- };
- eth2 {
- label = "arv752dpw22:green:lan2";
- gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
- };
- eth3 {
- label = "arv752dpw22:green:lan3";
- gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
- };
- eth4 {
- label = "arv752dpw22:green:lan4";
- gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <1>;
- lantiq,output = <1>;
- };
- leds {
- lantiq,pins = "io3", "io5", "io6", "io8";
- lantiq,open-drain = <1>;
- lantiq,output = <1>;
- };
- buttons {
- lantiq,pins = "io11", "io12", "io13", "io28";
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x30000>;
- read-only;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x40000 0x7b0000>;
- };
-
- boardconfig: partition@7f0000 {
- label = "board_config";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <3>;
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- lantiq,external-clock;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 30
- 0x7800 0 0 1 &icu0 135
- 0x7800 0 0 2 &icu0 135
- 0x7800 0 0 3 &icu0 135
- >;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0x3>;
-
- wifi@1814,3592 {
- compatible = "pci1814,3592";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
- model = "Speedport W 504V Typ A";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl_green;
- led-internet = &online_green;
- led-wifi = &wireless_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wlan {
- label = "wlan";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- /* key DECT is missing */
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power-green {
- label = "arv8539pw22:green:power";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power-red {
- label = "arv8539pw22:red:power";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- dsl_green: dsl-green {
- label = "arv8539pw22:green:dsl";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
-
- online_green: online-green {
- label = "arv8539pw22:green:online";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- wireless_green: wireless-green {
- label = "arv8539pw22:green:wlan";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
- /*
- telefonie green is missing
- */
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- relay {
- lantiq,pins = "io31";
- lantiq,output = <1>;
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&art 0x16>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x30000>; /* 192 KiB */
- read-only;
- };
-
- partition@30000 {
- label = "uboot";
- reg = <0x30000 0x10000>; /* 64 KiB */
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x7b0000>; /* 7872 KiB */
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x10000>; /* 64 KiB*/
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@168c,0029 {
- compatible = "pci168c,0029";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- mtd-mac-address = <&art 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
- model = "BT OpenReach VDSL Modem";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- dsl: dsl {
- label = "asl56026:green:dsl";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- /* power-* is a bicolour led */
- power_green: power_green {
- label = "asl56026:green:power";
- gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- power_red: power_red {
- label = "asl56026:red:power";
- gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- power_led_blink {
- gpio-export,name = "power_led_blink";
- gpio-export,output = <0>;
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
-
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
-
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x0800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "uboot_env";
- reg = <0x30000 0x10000>;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x750000>;
- };
-
- partition@790000 {
- label = "ddrconfig";
- reg = <0x790000 0x70000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
- model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_orange;
- led-failsafe = &power_red;
- led-running = &power_blue;
- led-upgrade = &power_blue;
-
- led-dsl = &broadband_blue;
- led-wifi = &wireless_blue;
- };
-
- memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- findhandset {
- label = "findhandset";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- upgrading-orange {
- label = "bthomehubv2b:orange:upgrading";
- gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
- };
-
- phone-orange {
- label = "bthomehubv2b:orange:phone";
- gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
- };
- phone-blue {
- label = "bthomehubv2b:blue:phone";
- gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
- };
-
- wireless-orange {
- label = "bthomehubv2b:orange:wireless";
- gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
- };
- wireless_blue: wireless-blue {
- label = "bthomehubv2b:blue:wireless";
- gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
- };
-
- broadband-red {
- label = "bthomehubv2b:red:broadband";
- gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
- };
- broadband-orange {
- label = "bthomehubv2b:orange:broadband";
- gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
- };
- broadband_blue: broadband-blue {
- label = "bthomehubv2b:blue:broadband";
- gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
- };
-
- power_red: power-red {
- label = "bthomehubv2b:red:power";
- gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
- };
- power_orange: power-orange {
- label = "bthomehubv2b:orange:power";
- gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- power_blue: power-blue {
- label = "bthomehubv2b:blue:power";
- gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
-
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- };
-
- btn_in {
- lantiq,pins = "io2", "io15", "io22";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
- };
-};
-
-&gpios {
- status = "okay";
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 { /* NOR Flash: Spansion S29AL004D 512KB */
- compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
- lantiq,cs = <0>;
- bank-width = <2>;
- reg = <0 0x0 0x80000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>; /* 256KB */
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x10000>; /* 64KB */
- };
-
- partition@50000 {
- label = "rg_conf_1";
- reg = <0x50000 0x10000>;
- };
-
- partition@60000 {
- label = "rg_conf_2";
- reg = <0x60000 0x10000>;
- };
-
- partition@70000 {
- label = "rg_conf_factory";
- reg = <0x70000 0x10000>;
- };
- };
- };
-
- flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <1 0x0 0x2000000 >;
- req-mask = <0x1>; /* PCI request lines to mask during NAND access */
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ath9k_cal: partition@0 {
- label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
- reg = <0x00000 0x4000>;
- read-only;
- };
-
- partition@4000 {
- label = "kernel";
- reg = <0x4000 0x200000>;
- };
-
- partition@164000 {
- label = "ubi";
- reg = <0x204000 0x1dfc000>;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@168c,0027 {
- compatible = "pci168c,0027";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
- model = "BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_orange;
- led-failsafe = &power_red;
- led-running = &power_blue;
- led-upgrade = &power_blue;
-
- led-dsl = &broadband_blue;
- led-wifi = &wireless_blue;
- };
-
- memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- restart {
- label = "restart";
- gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wireless-red {
- label = "bthomehubv3a:red:wireless";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
- wireless-orange {
- label = "bthomehubv3a:orange:wireless";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- wireless_blue: wireless-blue {
- label = "bthomehubv3a:blue:wireless";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
-
- broadband-red {
- label = "bthomehubv3a:red:broadband";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- broadband-orange {
- label = "bthomehubv3a:orange:broadband";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
- broadband_blue: broadband-blue {
- label = "bthomehubv3a:blue:broadband";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-
- power_red: power-red {
- label = "bthomehubv3a:red:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- power_orange: power-orange {
- label = "bthomehubv3a:orange:power";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_blue: power-blue {
- label = "bthomehubv3a:blue:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- };
- };
-};
-
-&gsw {
- phy-mode = "rgmii";
-};
-
-&localbus {
- flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <1 0x0 0x2000000 >;
- req-mask = <0x1>; /* PCI request lines to mask during NAND access */
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "preboot";
- reg = <0x00000 0x8000>;
- read-only;
- };
- partition@8000 {
- label = "u-boot";
- reg = <0x8000 0x05c000>;
- read-only;
- };
- partition@64000 {
- label = "uboot_env";
- reg = <0x64000 0x004000>;
- };
- ath9k_cal: partition@68000 {
- label = "art-copy";
- reg = <0x68000 0x004000>;
- };
- partition@6c000 {
- label = "kernel";
- reg = <0x6c000 0x200000>;
- };
- partition@26c000 {
- label = "ubi";
- reg = <0x26c000 0x1d94000>;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@7000 {
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
- model = "BT Home Hub 5A";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_blue;
- led-upgrade = &power_blue;
-
- led-dsl = &broadband_blue;
- led-wifi = &wireless_blue;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- restart {
- label = "restart";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER2>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* broadband-* is a single RGB led */
- broadband-red {
- label = "bthomehubv5a:red:broadband";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
- broadband-green {
- label = "bthomehubv5a:green:broadband";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- broadband_blue: broadband-blue {
- label = "bthomehubv5a:blue:broadband";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- /* wireless-* is a single RGB led */
- wireless-red {
- label = "bthomehubv5a:red:wireless";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- };
- wireless-green {
- label = "bthomehubv5a:green:wireless";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
- wireless_blue: wireless-blue {
- label = "bthomehubv5a:blue:wireless";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- /* power-* is a single RGB led */
- power_red: power-red {
- label = "bthomehubv5a:red:power";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- power_green: power-green {
- label = "bthomehubv5a:green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_blue: power-blue {
- label = "bthomehubv5a:blue:power";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- dimmed {
- label = "dimmed";
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain;
- };
- pcie_rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- lantiq,open-drain;
- };
- usb_vbus {
- lantiq,pins = "io33";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&localbus {
- flash@1 {
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <0x1 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- nand-on-flash-bbt;
- nand-ecc-strength = <3>;
- nand-ecc-step-size = <256>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0xa0000>;
- read-only;
- };
- partition@a0000 {
- label = "uboot-env";
- reg = <0xa0000 0x20000>;
- read-only;
- };
- partition@c0000 {
- label = "unused";
- reg = <0xc0000 0x40000>;
- };
- partition@100000 {
- label = "ubi";
- reg = <0x100000 0x7e80000>;
- };
- /*
- * last 512 KiB are for the bad block table, not writable
- */
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@168c,002d {
- compatible = "pci168c,002d";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- qca,disable-5ghz;
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "amazonse.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
- model = "Netgear DGN1000B";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &online_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x1000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- rfkill {
- label = "rfkill";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- dsl: dsl {
- label = "dgn1000b:green:dsl";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- online_green: online {
- label = "dgn1000b:green:online";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- online2 {
- label = "dgn1000b:red:online";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- wps {
- label = "dgn1000b:green:wps";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- power: power {
- label = "dgn1000b:green:power";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- /*
- power red is missing
- */
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- keys_in {
- lantiq,pins = "io0",/* "io25", */"io29";
- lantiq,pull = <2>;
- lantiq,open-drain = <1>;
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mac-address = [ 00 11 22 33 44 55 ];
-};
-
-&spi {
- status = "okay";
-
- flash@1 {
- compatible = "jedec,spi-nor";
- reg = <1>;
- spi-max-frequency = <5000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "ENV_MAC";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "DPF";
- read-only;
- };
-
- partition@40000 {
- reg = <0x40000 0x10000>;
- label = "NVRAM";
- read-only;
- };
-
- partition@500000 {
- reg = <0x50000 0x003a0000>;
- label = "kernel";
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "DGN3500.dtsi"
-
-/ {
- compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
- model = "Netgear DGN3500";
-};
+++ /dev/null
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- chosen {
- bootargs = "root= console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &internet;
- led-usb = &led_usb;
- led-wifi = &wifi_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- rtl8366rb {
- compatible = "realtek,rtl8366rb";
- gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
-
- realtek,initvals = <
- 0x0000 0x0830
- 0x0400 0x8130
- 0x000a 0x83ed
- 0x0f51 0x0017
- 0x02f5 0x0048
- 0x02fa 0xffdf
- 0x02fb 0xffe0
- 0x0450 0x0000
- 0x0401 0x0000
- 0x0431 0x0960
- >;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- internet: internet {
- label = "dgn3500:green:internet";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
- internet2 {
- label = "dgn3500:red:internet";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "dgn3500:green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "dgn3500:green:usb";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- };
- power_green: power {
- label = "dgn3500:green:power";
- gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power2 {
- label = "dgn3500:red:power";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- };
- wifi_green: wifi {
- label = "dgn3500:green:wireless";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- wifi2 {
- label = "dgn3500:amber:wireless";
- gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "dgn3500:green:wps";
- gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@168c,0029 {
- compatible = "pci168c,0029";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x10000>;
- label = "uboot";
- read-only;
- };
-
- partition@10000 {
- reg = <0x10000 0x10000>;
- label = "uboot-env";
- read-only;
- };
-
- ath9k_cal: partition@20000 {
- reg = <0x20000 0x10000>;
- label = "calibration";
- read-only;
- };
-
- partition@50000 {
- reg = <0x50000 0xfa0000>;
- label = "firmware";
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "DGN3500.dtsi"
-
-/ {
- compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
- model = "Netgear DGN3500B";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
- model = "Netgear DM200";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_amber;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- annexa {
- gpio-export,name = "annexa";
- gpio-export,output = <0>;
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- };
- annexb {
- gpio-export,name = "annexb";
- gpio-export,output = <0>;
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_amber: power_amber {
- label = "dm200:amber:power";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
- power_green: power_green {
- label = "dm200:green:power";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- lan_amber {
- label = "dm200:amber:lan";
- gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
- };
- lan_green {
- label = "dm200:green:lan";
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
-
- dsl_amber {
- label = "dm200:amber:dsl";
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
- dsl_green: dsl_green {
- label = "dm200:green:dsl";
- gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-ð0 {
- lantiq,phys = <&gphy1>;
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&pcie0 {
- status = "disabled";
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <10000000>;
-
- partitions {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fixed-partitions";
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "uboot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "gphyfirmware";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x7b0000>;
- label = "firmware";
- };
-
- partition@7e0000 {
- reg = <0x7e0000 0x10000>;
- label = "sysconfig";
- read-only;
- };
-
- partition@7f0000 {
- reg = <0x7f0000 0x2000>;
- label = "ubootconfig";
- read-only;
- };
-
- partition@7f2000 {
- reg = <0x7f2000 0x1000>;
- label = "ART";
- read-only;
- };
-
- partition@7f3000 {
- reg = <0x7f3000 0x1000>;
- label = "pot";
- read-only;
- };
-
- partition@7f4000 {
- reg = <0x7f4000 0xc000>;
- label = "ret";
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
- compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
- model = "Intel EASY50712 Nand";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- };
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>; /* 64 KB */
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>; /* 64 KB */
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x400000>;
- };
- };
- };
-};
-
-&pci0 {
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-/ {
- compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
- model = "Lantiq EASY50810";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- };
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>; /* 64 KB */
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>; /* 64 KB */
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x3d0000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x400000>;
- };
- };
- };
-};
-
-&stp {
- status = "okay";
- lantiq,shadow = <0xfff>;
- lantiq,groups = <0x3>;
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-usb = &led_usb1;
- led-usb2 = &led_usb2;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-/* reset {
- label = "reset";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };*/
- paging {
- label = "paging";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "easy80920:green:power";
- gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- warning {
- label = "easy80920:green:warning";
- gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
- };
- fxs1 {
- label = "easy80920:green:fxs1";
- gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
- };
- fxs2 {
- label = "easy80920:green:fxs2";
- gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
- };
- fxo {
- label = "easy80920:green:fxo";
- gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
- };
- led_usb1: usb1 {
- label = "easy80920:green:usb1";
- gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
- };
- led_usb2: usb2 {
- label = "easy80920:green:usb2";
- gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
- };
- sd {
- label = "easy80920:green:sd";
- gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
- };
- wps {
- label = "easy80920:green:wps";
- gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- };
-
- wan: interface@1 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- lantiq,wan;
-
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin3 {
- lantiq,groups = "exin3";
- lantiq,function = "exin";
- };
- conf_out {
- lantiq,pins = "io21",
- "io33";
- lantiq,open-drain;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- conf_in {
- lantiq,pins = "io39"; /* exin3 */
- lantiq,pull = <2>;
- };
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "ENV_MAC";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "DPF";
- read-only;
- };
-
- partition@40000 {
- reg = <0x40000 0x10000>;
- label = "NVRAM";
- read-only;
- };
-
- partition@500000 {
- reg = <0x50000 0x003a0000>;
- label = "kernel";
- };
- };
- };
-};
-
-&pci0 {
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-};
-
-&stp {
- status = "okay";
-
- lantiq,shadow = <0xffff>;
- lantiq,groups = <0x7>;
- lantiq,dsl = <0x3>;
- lantiq,phy1 = <0x7>;
- lantiq,phy2 = <0x7>;
- /* lantiq,rising; */
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-
-#include "EASY80920.dtsi"
-
-/ {
- compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
- model = "Intel EASY80920 Nand";
-
- chosen {
- bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x100000>; /* 1024 KB */
- };
-
- partition@100000 {
- label = "uboot_env";
- reg = <0x100000 0x40000>; /* 256 KB */
- };
-
- partition@140000 {
- label = "ubootconfigB";
- reg = <0x140000 0x40000>; /* 256 KB */
- };
-
- partition@180000 {
- label = "gphyfirmware";
- reg = <0x180000 0x40000>; /* 256 KB */
- };
-
- partition@1c0000 {
- label = "ubi";
- reg = <0x1c0000 0xc800000>;
- };
-
- partition@c9c0000 {
- label = "calibration";
- reg = <0xc9c0000 0x100000>;
- };
-
- partition@cac0000 {
- label = "res";
- reg = <0xcac0000 0x13540000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "EASY80920.dtsi"
-
-/ {
- compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
- model = "Intel EASY80920 Nor";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7e0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon FTTDP8 Reference Board";
- compatible = "lantiq,easy88388", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- keys {
- compatible = "gpio-keys";
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <0x198>;
- };
- };
-
- pinctrl {
- led_pins: led-pins {
- lantiq,pins = "io34", "io35", "io36", "io37", "io38",
- "io39", "io40", "io41";
- lantiq,function = "gpio";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins &bootled_pins>;
-
- GPON {
- label = "easy88388:green:gpon";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- TEST {
- label = "easy88388:green:test";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
- STATUS {
- label = "easy88388:green:status";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- };
- ERROR {
- label = "easy88388:red:error";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- };
-
- DSL1 {
- label = "easy88388:dsl:1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- DSL2 {
- label = "easy88388:dsl:2";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- DSL3 {
- label = "easy88388:dsl:3";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
- DSL4 {
- label = "easy88388:dsl:4";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
- DSL5 {
- label = "easy88388:dsl:5";
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- };
- DSL6 {
- label = "easy88388:dsl:6";
- gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- };
- DSL7 {
- label = "easy88388:dsl:7";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
- DSL8 {
- label = "easy88388:dsl:8";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon FTTdp G.FAST Reference Board";
- compatible = "lantiq,easy88444", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- keys {
- compatible = "gpio-keys";
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <0x198>;
- };
- };
-
- pinctrl {
- led_pins: led-pins {
- lantiq,pins = "io34", "io35", "io37";
- lantiq,function = "gpio";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins &bootled_pins>;
-
- GPON {
- label = "easy88444:green:gpon";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- };
- TEST {
- label = "easy88444:green:test";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
- STATUS {
- label = "easy88444:green:status";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- };
-
- GFAST1 {
- label = "easy88444:gfast:1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- };
- GFAST2 {
- label = "easy88444:gfast:2";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
- GFAST3 {
- label = "easy88444:gfast:3";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- };
- GFAST4 {
- label = "easy88444:gfast:4";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
+++ /dev/null
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "lantiq,easy98000", "lantiq,falcon";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&bootled_pins>;
-
- LED_0 {
- label = "easy98000:green:gpon";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_1 {
- label = "easy98000:red:gpon";
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_2 {
- label = "easy98000:green:gpon_tx";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_3 {
- label = "easy98000:green:gpon_rx";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_4 {
- label = "easy98000:green:voice";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_5 {
- label = "easy98000:green:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- };
-};
-
-&ebu_cs1 {
- eth0: ethernet@3 {
- compatible = "davicom,dm9000";
- device_type = "network";
- reg = <0x0000003 0x1>, <0x0000001 0x1>;
- reg-names = "addr", "data";
- interrupt-parent = <&gpio1>;
- #interrupt-cells = <2>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
- cpld@3c00000 {
- compatible = "lantiq,easy98000_addon";
- reg = <0x3c00000 0x2>;
- };
-
- cpld@3c0000c {
- compatible = "lantiq,easy98000_cpld_led";
- reg = <0x3c0000c 0x2>, <0x3c00012 0x2>;
- };
-};
-
-/* // enable this for second uart:
-&serial1 {
- status = "okay";
-};*/
-
-&spi {
- status = "okay";
-
- eeprom@2 {
- compatible = "atmel,at25", "atmel,at25160n";
- reg = <2>;
- spi-max-frequency = <1000000>;
- spi-cpha;
- spi-cpol;
-
- pagesize = <32>;
- size = <2048>;
- address-width = <16>;
- };
-};
-
-&i2c {
- status = "okay";
-
- clock-frequency = <100000>;
-
- /* eeprom-emulation by OMU */
- eeprom@50 {
- compatible = "at,24c02";
- reg = <0x50>;
- };
- eeprom@51 {
- compatible = "at,24c02";
- reg = <0x51>;
- };
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-
-/ {
- model = "Lantiq Falcon (NAND)";
- compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
-
- aliases {
- spi0 = &spi;
- };
-};
-
-&ebu_cs0 {
- flash@0 {
- compatible = "gen_nand", "lantiq,nand-falcon";
- bank-width = <1>;
- reg = <0x0 0x40000>;
- #address-cells = <1>;
- #size-cells = <1>;
- linux,mtd-name = "gen_nand";
- bbt-use-flash;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x40000 0x40000>;
- };
-
- partition@20000 {
- label = "linux";
- reg = <0x80000 0x3d0000>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-
-/ {
- model = "Lantiq Falcon (NOR)";
- compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
-
- aliases {
- spi0 = &spi;
- };
-};
-
-&ebu_cs0 {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0x0 0x4000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x40000 0x40000>;
- };
-
- partition@20000 {
- label = "linux";
- reg = <0x80000 0x3d0000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "EASY98000-base.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon (SFLASH)";
- compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- spi1 = &spi;
- };
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon Reference Board";
- compatible = "lantiq,easy98020", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- keys {
- compatible = "gpio-keys";
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <0x198>;
- };
- };
-
- pinctrl {
- led_pins: phy-led-pins {
- lantiq,pins = "io42", "io41", "io38", "io37";
- lantiq,function = "gpio";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&bootled_pins>, <&led_pins>;
-
- GPON {
- label = "easy98020:green:gpon";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- TEST {
- label = "easy98020:green:test";
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- ETH {
- label = "easy98020:green:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- VOICE {
- label = "easy98020:green:voice";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- VIDEO {
- label = "easy98020:green:video";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- GE0_ACT {
- label = "easy98020:ge0_act";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- };
- GE0_LINK {
- label = "easy98020:ge0_link";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- };
- GE1_ACT {
- label = "easy98020:ge1_act";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- };
- GE1_LINK {
- label = "easy98020:ge1_link";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon Reference Board V1.8";
- compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- keys {
- compatible = "gpio-keys";
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <0x198>;
- };
- };
-
- pinctrl {
- led_pins: led-pins {
- lantiq,pins = "io11", "io14", "io36", "io37", "io38";
- lantiq,function = "gpio";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins &bootled_pins>;
-
- GPON {
- label = "easy98020:green:gpon";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- TEST {
- label = "easy98020:green:test";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- ETH {
- label = "easy98020:green:status";
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- VOICE {
- label = "easy98020:green:voice";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- VIDEO {
- label = "easy98020:green:video";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon HGU Reference Board";
- compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- keys {
- compatible = "gpio-keys";
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <0x198>;
- };
- };
-
- gpio-mmc {
- /* Place-holder for SIM-Card connector,
- to list the used GPIOs, no official binding */
- compatible = "gpio-mmc";
- gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
- <&gpio0 3 GPIO_ACTIVE_HIGH>,
- <&gpio0 2 GPIO_ACTIVE_HIGH>,
- <0>; /* no CS */
- gpio-names = "di", "do", "clk", "cs";
- reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
- };
-
- pinctrl {
- led_pins: led-pins {
- lantiq,pins = "io11", "io14", "io36", "io37", "io38";
- lantiq,function = "gpio";
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins &bootled_pins>;
-
- GPON {
- label = "easy98021:green:gpon";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- TEST {
- label = "easy98021:red:test";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- ETH {
- label = "easy98021:green:status";
- gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- VOICE {
- label = "easy98021:green:voice";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- SIMCARD {
- label = "easy98021:green:simcard";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- };
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon SFP Stick with SyncE";
- compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- pinctrl {
- compatible = "lantiq,pinctrl-falcon";
-
- asc0_func1: func1 {
- func1_tx {
- lantiq,pins = "io32";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- func1_rx {
- lantiq,pins = "io33";
- lantiq,mux = <0>;
- };
- };
- asc0_func2: func2 {
- func2_tx {
- lantiq,pins = "io32";
- lantiq,mux = <0>;
- };
- func2_rx {
- lantiq,pins = "io33";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- };
- asc0_func3: func3 {
- func3_tx {
- lantiq,pins = "io32";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- func3_rx {
- lantiq,pins = "io33";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- };
- };
-
- pinselect-asc0 {
- compatible = "lantiq,pinselect-asc0";
- pinctrl-names = "asc0", "func1", "func2", "func3";
- pinctrl-0 = <&asc0_pins>;
- pinctrl-1 = <&asc0_func1>;
- pinctrl-2 = <&asc0_func2>;
- pinctrl-3 = <&asc0_func3>;
- };
-};
-
-&serial0 {
- pinctrl-names = "default";
- /* use "empty" pinctrl to leave setting from u-boot enabled */
- pinctrl-0 = < >;
-};
-
-&i2c {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon SFP Stick with SyncE/1588";
- compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- pinctrl {
- compatible = "lantiq,pinctrl-falcon";
-
- asc0_func1: func1 {
- func1_tx {
- lantiq,pins = "io32";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- func1_rx {
- lantiq,pins = "io33";
- lantiq,mux = <0>;
- };
- };
- asc0_func2: func2 {
- func2_tx {
- lantiq,pins = "io32";
- lantiq,mux = <0>;
- };
- func2_rx {
- lantiq,pins = "io33";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- };
- asc0_func3: func3 {
- func3_tx {
- lantiq,pins = "io32";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- func3_rx {
- lantiq,pins = "io33";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- };
- };
-
- pinselect-asc0 {
- compatible = "lantiq,pinselect-asc0";
- pinctrl-names = "asc0", "func1", "func2", "func3";
- pinctrl-0 = <&asc0_pins>;
- pinctrl-1 = <&asc0_func1>;
- pinctrl-2 = <&asc0_func2>;
- pinctrl-3 = <&asc0_func3>;
- };
-};
-
-&serial0 {
- pinctrl-names = "default";
- /* use "empty" pinctrl to leave setting from u-boot enabled */
- pinctrl-0 = < >;
-};
-
-&i2c {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon / Vinax MDU Board";
- compatible = "lantiq,falcon-mdu", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&bootled_pins>;
-
- LED_0 {
- label = "mdu:green:gpon";
- gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_1 {
- label = "mdu:green:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_2 {
- label = "mdu:green:2";
- gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_3 {
- label = "mdu:green:3";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- LED_4 {
- label = "mdu:green:4";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
- };
-};
-
+++ /dev/null
-/dts-v1/;
-
-#include "falcon.dtsi"
-#include "falcon-sflash-16M.dtsi"
-
-/ {
- model = "Lantiq Falcon SFP Stick";
- compatible = "lantiq,falcon-sfp", "lantiq,falcon";
-
- aliases {
- spi0 = &ebu_cs0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>; // 64M at 0x0
- };
-
- pinctrl {
- compatible = "lantiq,pinctrl-falcon";
-
- asc0_func1: func1 {
- func1_tx {
- lantiq,pins = "io32";
- lantiq,mux = <1>;
- lantiq,output = <0>;
- };
- func1_rx {
- lantiq,pins = "io33";
- lantiq,mux = <0>;
- };
- };
- asc0_func2: func2 {
- func2_tx {
- lantiq,pins = "io32";
- lantiq,mux = <0>;
- };
- func2_rx {
- lantiq,pins = "io33";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- };
- asc0_func3: func3 {
- func3_tx {
- lantiq,pins = "io32";
- lantiq,mux = <1>;
- lantiq,output = <0>;
- };
- func3_rx {
- lantiq,pins = "io33";
- lantiq,mux = <1>;
- lantiq,input = <0>;
- };
- };
- };
-
- pinselect-asc0 {
- compatible = "lantiq,pinselect-asc0";
- pinctrl-names = "asc0", "func1", "func2", "func3";
- pinctrl-0 = <&asc0_pins>;
- pinctrl-1 = <&asc0_func1>;
- pinctrl-2 = <&asc0_func2>;
- pinctrl-3 = <&asc0_func3>;
- };
-};
-
-&serial0 {
- pinctrl-names = "default";
- /* use "empty" pinctrl to leave setting from u-boot enabled */
- pinctrl-0 = < >;
-};
-
-&i2c {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "FRITZ3370-REV2.dtsi"
-
-/ {
- compatible = "avm,fritz3370-rev2-hynix", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
- model = "AVM FRITZ!Box 3370 Rev. 2 (Hynix NAND)";
-};
-
-&localbus {
- flash@1 {
- compatible = "lantiq,nand-xway";
- bank-width = <2>;
- reg = <1 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- nand-ecc-mode = "soft";
- nand-ecc-strength = <3>;
- nand-ecc-step-size = <256>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "ubi";
- reg = <0x400000 0x7c00000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "FRITZ3370-REV2.dtsi"
-
-/ {
- compatible = "avm,fritz3370-rev2-micron", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
- model = "AVM FRITZ!Box 3370 Rev. 2 (Micron NAND)";
-};
-
-&localbus {
- flash@1 {
- compatible = "lantiq,nand-xway";
- bank-width = <2>;
- reg = <1 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- nand-ecc-mode = "on-die";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "ubi";
- reg = <0x400000 0x7c00000>;
- };
- };
- };
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
- model = "AVM FRITZ!Box 3370 Rev. 2";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_red;
-
- led-dsl = &dsl;
- led-internet = &info_green;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power {
- label = "power";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_POWER>;
- };
-
- wifi {
- label = "wlan";
- gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WLAN>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power {
- label = "fritz3370:green:power";
- gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- power_red: power2 {
- label = "fritz3370:red:power";
- gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
- };
-
- info_red {
- label = "fritz3370:red:info";
- gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
- };
-
- wifi: wifi {
- label = "fritz3370:green:wlan";
- gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
- };
-
- dsl: dsl {
- label = "fritz3370:green:dsl";
- gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "fritz3370:green:lan";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- };
-
- info_green: info_green {
- label = "fritz3370:green:info";
- gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb0_vbus: regulator-usb0-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB0_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- usb1_vbus: regulator-usb1-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB1_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
- };
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
- };
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
-
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io37", "io44";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
-
- pcie-rst {
- lantiq,pins = "io21";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&pcie0 {
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
- };
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- urlader: partition@0 {
- reg = <0x0 0x20000>;
- label = "urlader";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x10000>;
- label = "tffs (1)";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "tffs (2)";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb0_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb1_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9";
- model = "AVM FRITZ!Box 7312";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &info_green;
- led-wifi = &wlan;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wlan {
- label = "wlan";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- dect {
- label = "dect";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "fritz7312:green:power";
- gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- voice {
- label = "fritz7312:green:fon";
- gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
- };
- dect {
- label = "fritz7312:green:dect";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- };
- wlan: wlan {
- label = "fritz7312:green:wlan";
- gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- };
- info_green: info_green {
- label = "fritz7312:green:info";
- gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- ar8030-intr {
- lantiq,groups = "exin3";
- lantiq,function = "exin";
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- ar8030-clk {
- lantiq,groups = "clkout2";
- lantiq,output = <1>;
- lantiq,open-drain;
- };
- ar8030-rst {
- lantiq,pins = "io34";
- lantiq,output = <1>;
- lantiq,pull = <2>;
- lantiq,open-drain;
- };
- };
-};
-
-&gsw {
- phy-mode = "rmii";
- phy-handle = <&phy0>;
- mtd-mac-address = <&ath9k_cal 0xa91>;
- mtd-mac-address-increment = <(-2)>;
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ath9k_cal: partition@0 {
- label = "urlader";
- reg = <0x00000 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0xf60000>;
- };
-
- partition@f80000 {
- label = "tffs (1)";
- reg = <0xf80000 0x40000>;
- read-only;
- };
-
- partition@fc0000 {
- label = "tffs (2)";
- reg = <0xfc0000 0x40000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
- <&pci_gnt3_pins>, <&pci_gnt4_pins>,
- <&pci_req1_pins>, <&pci_req2_pins>,
- <&pci_req4_pins>;
- pinctrl-names = "default";
-
- req-mask = <0xf>;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
- model = "AVM FRITZ!Box 7320";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &info_green;
- led-wifi = &wlan;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- dect {
- label = "dect";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "fritz7320:green:power";
- gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- voice {
- label = "fritz7320:green:fon";
- gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
- };
- dect {
- label = "fritz7320:green:dect";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- };
- wlan: wlan {
- label = "fritz7320:green:wlan";
- gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- };
- info_green: info_green {
- label = "fritz7320:green:info";
- gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
- };
- info_red {
- label = "fritz7320:red:info";
- gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gsw {
- phy-mode = "mii";
- mtd-mac-address = <&ath9k_cal 0xa91>;
- mtd-mac-address-increment = <(-2)>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ath9k_cal: partition@0 {
- label = "urlader";
- reg = <0x00000 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0xf60000>;
- };
-
- partition@f80000 {
- label = "tffs (1)";
- reg = <0xf80000 0x40000>;
- read-only;
- };
-
- partition@fc0000 {
- label = "tffs (2)";
- reg = <0xfc0000 0x40000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
- <&pci_gnt3_pins>, <&pci_gnt4_pins>,
- <&pci_req1_pins>, <&pci_req2_pins>,
- <&pci_req3_pins>, <&pci_req4_pins>;
-
- req-mask = <0xf>;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x7000 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "FRITZ736X.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "avm,fritz7360sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
- model = "AVM FRITZ!Box 7360 SL";
-};
-
-&power_green {
- label = "fritz7360sl:green:power";
-};
-
-&power_red {
- label = "fritz7360sl:red:power";
-};
-
-&info_green {
- label = "fritz7360sl:green:info";
-};
-
-&wifi {
- label = "fritz7360sl:green:wlan";
-};
-
-&info_red {
- label = "fritz7360sl:red:info";
-};
-
-&dect {
- label = "fritz7360sl:green:dect";
-};
-
-&state_default {
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
-
- partitions {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fixed-partitions";
-
- urlader: partition@0 {
- label = "urlader";
- reg = <0x00000 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0xf60000>;
- };
-
- partition@f80000 {
- label = "tffs (1)";
- reg = <0xf80000 0x40000>;
- read-only;
- };
-
- partition@fc0000 {
- label = "tffs (2)";
- reg = <0xfc0000 0x40000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "FRITZ736X.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
- model = "AVM FRITZ!Box 7362 SL";
-};
-
-&power_green {
- label = "fritz7362sl:green:power";
-};
-
-&power_red {
- label = "fritz7362sl:red:power";
-};
-
-&info_green {
- label = "fritz7362sl:green:info";
-};
-
-&wifi {
- label = "fritz7362sl:green:wlan";
-};
-
-&info_red {
- label = "fritz7362sl:red:info";
-};
-
-&dect {
- label = "fritz7362sl:green:dect";
-};
-
-&state_default {
- pcie-rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <1>;
- lantiq,output = <1>;
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <4 0>;
- spi-max-frequency = <1000000>;
-
- urlader: partition@0 {
- reg = <0x0 0x40000>;
- label = "urlader";
- read-only;
- };
-
- partition@40000 {
- reg = <0x40000 0x60000>;
- label = "tffs (1)";
- read-only;
- };
-
- partition@A0000 {
- reg = <0xA0000 0x60000>;
- label = "tffs (2)";
- read-only;
- };
- };
-};
-
-&localbus {
- flash@1 {
- compatible = "lantiq,nand-xway";
- lantiq,cs1 = <1>;
- bank-width = <1>;
- reg = <1 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- nand-ecc-mode = "on-die";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "ubi";
- reg = <0x400000 0x7c00000>;
- };
- };
- };
-};
-
-&pcie0 {
- gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
-
- pcie@0 {
- #size-cells = <1>;
- #address-cells = <2>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_red;
-
- led-dsl = &info_green;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- dect {
- label = "dect";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_PHONE>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WLAN>;
- };
- };
-
- leds: leds {
- compatible = "gpio-leds";
-
- power_green: power {
- gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- power_red: power2 {
- gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
- };
-
- info_green: info_green {
- gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
- };
-
- wifi: wifi {
- gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
- };
-
- info_red: info_red {
- gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
- };
-
- dect: dect {
- gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&urlader 0xa91>;
- mtd-mac-address-increment = <(-2)>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rmii";
- phy-handle = <&phy0>;
- };
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rmii";
- phy-handle = <&phy1>;
- };
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
-
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x00>;
- compatible = "ethernet-phy-ieee802.3-c22";
- reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <0x01>;
- compatible = "ethernet-phy-ieee802.3-c22";
- reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
-
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io37", "io44";
- lantiq,pull = <0>;
- lantiq,open-drain;
- lantiq,output = <1>;
- };
- };
-
-};
-
-&pcie0 {
- status = "okay";
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <1>;
- #address-cells = <2>;
- device_type = "pci";
-
- wifi@168c,002e {
- compatible = "pci168c,002e";
- reg = <0 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9";
- model = "AVM FRITZ!Box 7412";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_red;
-
- led-dsl = &info;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- dect {
- label = "dect";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power_green {
- label = "fritz7412:green:power";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- power_red: power_red {
- label = "fritz7412:red:power";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
-
- fon {
- label = "fritz7412:green:fon";
- gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
- };
-
- dect {
- label = "fritz7412:green:dect";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- wifi: wifi {
- label = "fritz7412:green:wifi";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- info: info {
- label = "fritz7412:green:info";
- gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nand-xway";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
- lantiq,cs = <1>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "urlader";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "nand-tffs";
- reg = <0x40000 0x400000>;
- read-only;
- };
-
- partition@440000 {
- label = "kernel";
- reg = <0x440000 0x400000>;
- };
-
- partition@840000 {
- label = "ubi";
- reg = <0x840000 0x3000000>;
- };
-
- partition@3840000 {
- label = "reserved-kernel";
- reg = <0x3840000 0x400000>;
- read-only;
- };
-
- partition@3c40000 {
- label = "reserved-filesystem";
- reg = <0x3c40000 0x3000000>;
- read-only;
- };
-
- partition@6c40000 {
- label = "config";
- reg = <0x6c40000 0x400000>;
- read-only;
- };
-
- partition@6e40000 {
- label = "nand-filesystem";
- reg = <0x6e40000 0x400000>;
- read-only;
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
-
- wifi@168c,002e {
- compatible = "pci168c,002e";
- reg = <0 0 0 0 0>;
- qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pcie-rst {
- lantiq,pins = "io11";
- lantiq,open-drain = <1>;
- lantiq,output = <1>;
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-ð0 {
- lantiq,phys = <&gphy0>;
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
- lantiq,switch;
-
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&vmmc {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
- model = "Gigaset SX761,SX762,SX763";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- switch {
- gpio-export,name = "switch";
- gpio-export,output = <1>;
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpios {
- status = "okay";
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x30000 0x10000>;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x7c0000>;
- };
- };
- };
-
- gpiomm: gpio@1 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x3>;
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
- model = "ZTE H210L";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_green;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &online;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- rfkill {
- label = "rfkill";
- gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power {
- label = "h201l:green:power";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- online: online {
- label = "h201l:green:internet";
- gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "h201l:green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- phone {
- label = "h201l:green:phone";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "h201l:green:wps";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "h201l:green:wlan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "h201l:green:usb";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- switch {
- gpio-export,name = "switch";
- gpio-export,output = <1>;
- gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
- };
- usb {
- gpio-export,name = "usb";
- gpio-export,output = <1>;
- gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
- };
- wifi {
- gpio-export,name = "wifi";
- gpio-export,output = <1>;
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- };
-};
-
-&gsw {
- phy-mode = "rgmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "uboot_env";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- partition@30000 {
- label = "firmware";
- reg = <0x30000 0x7d0000>;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
- model = "ZyXEL P-2601HN-Fx";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &online;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- rfkill {
- label = "rfkill";
- gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power {
- label = "p2601hnfx:green:power";
- gpios = <&stp 11 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power2 {
- label = "p2601hnfx:red:power";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- };
- online: online {
- label = "p2601hnfx:green:internet";
- gpios = <&stp 13 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "p2601hnfx:red:internet";
- gpios = <&stp 12 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "p2601hnfx:green:dsl";
- gpios = <&stp 14 GPIO_ACTIVE_LOW>;
- };
- phone {
- label = "p2601hnfx:green:phone";
- gpios = <&stp 9 GPIO_ACTIVE_LOW>;
- };
- phone2 {
- label = "p2601hnfx:orange:phone";
- gpios = <&stp 8 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "p2601hnfx:green:wireless";
- gpios = <&stp 15 GPIO_ACTIVE_LOW>;
- };
- wifi2 {
- label = "p2601hnfx:orange:wireless";
- gpios = <&stp 10 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- switch {
- gpio-export,name = "switch";
- gpio-export,output = <1>;
- gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gsw {
- phy-mode = "rmii";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0xfa0000>;
- };
- };
- };
-};
-
-&pci0 {
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-};
-
-&stp {
- status = "okay";
- lantiq,shadow = <0xfff>;
- lantiq,groups = <0x3>;
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "P2812HNUFX.dtsi"
-
-/ {
- compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
- model = "ZyXEL P-2812HNU-F1";
-
- aliases {
- led-usb = &led_usb1;
- led-usb2 = &led_usb2;
- };
-
- leds {
- led_usb1: usb1 {
- label = "p2812hnuf1:green:usb1";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- };
- led_usb2: usb2 {
- label = "p2812hnuf1:green:usb2";
- gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- };
- partition@40000 {
- label = "uboot-env";
- reg = <0x40000 0x20000>;
- };
- partition@60000 {
- label = "kernel";
- reg = <0x60000 0x300000>;
- };
- partition@360000 {
- label = "ubi";
- reg = <0x360000 0x7ca0000>;
- };
- };
- };
-};
-
-&pci0 {
- wifi@1814,3062 {
- compatible = "pci1814,3062";
- reg = <0x7000 0 0 0 0>;
- ralink,eeprom = "RT3062.eeprom";
- };
-};
-
-&pcie0 {
- status = "disabled";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "P2812HNUFX.dtsi"
-
-/ {
- compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
- model = "ZyXEL P-2812HNU-F3";
-};
-
-&pci0 {
- wifi@1814,3092 {
- compatible = "pci1814,3092";
- reg = <0x7000 0 0 0 0>;
- ralink,eeprom = "RT3092.eeprom";
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>;
-
- pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x50000>;
- read-only;
- };
- partition@50000 {
- label = "uboot-env";
- reg = <0x50000 0x10000>;
- };
- partition@60000 {
- label = "unused";
- reg = <0x60000 0x7a0000>;
- };
- };
- };
-
- flash@1 {
- compatible = "lantiq,nand-xway";
- lantiq,cs = <1>;
- bank-width = <2>;
- reg = <1 0x0 0x2000000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x200000>;
- };
- partition@200000 {
- label = "ubi";
- reg = <0x200000 0x7e00000>;
- };
- };
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl_green;
- led-internet = &internet_green;
- led-wifi = &wireless_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- rfkill {
- label = "rfkill";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- internet_red {
- label = "p2812hnufx:red:internet";
- gpios = <&stp 16 GPIO_ACTIVE_LOW>;
- };
- internet_green: internet_green {
- label = "p2812hnufx:green:internet";
- gpios = <&stp 17 GPIO_ACTIVE_LOW>;
- };
- dsl_green: dsl_green {
- label = "p2812hnufx:green:dsl";
- gpios = <&stp 18 GPIO_ACTIVE_LOW>;
- };
- dsl_orange {
- label = "p2812hnufx:orange:dsl";
- gpios = <&stp 19 GPIO_ACTIVE_LOW>;
- };
- wireless_orange {
- label = "p2812hnufx:orange:wlan";
- gpios = <&stp 20 GPIO_ACTIVE_LOW>;
- };
- wireless_green: wireless_green {
- label = "p2812hnufx:green:wlan";
- gpios = <&stp 21 GPIO_ACTIVE_LOW>;
- };
- power_red: power {
- label = "p2812hnufx:red:power";
- gpios = <&stp 22 GPIO_ACTIVE_LOW>;
- };
- power_green: power2 {
- label = "p2812hnufx:green:power";
- gpios = <&stp 23 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- phone1 {
- label = "p2812hnufx:green:phone";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- phone1warn {
- label = "p2812hnufx:orange:phone";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- phone2warn {
- label = "p2812hnufx:orange:phone2";
- gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
- };
- phone2 {
- label = "p2812hnufx:green:phone2";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led0_pins>, <&gphy0_led2_pins>,
- <&gphy1_led1_pins>, <&gphy1_led2_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mac-address = [ 00 11 22 33 44 55 ];
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- exin3 {
- lantiq,groups = "exin3";
- lantiq,function = "exin";
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- ifxhcd-rst {
- lantiq,pins = "io33";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&pci0 {
- status = "okay";
-
- pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
- pinctrl-names = "default";
-
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&stp {
- status = "okay";
-
- lantiq,shadow = <0xffffff>;
- lantiq,groups = <0x7>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x0>;
- lantiq,phy2 = <0x0>;
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TDW89X0.dtsi"
-
-/ {
- compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
- model = "TP-LINK TD-W8970";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "TDW89X0.dtsi"
-
-/ {
- compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
- model = "TP-LINK TD-W8980";
-
- gpio-leds {
- wifi2 {
- label = "tdw8980:green:wlan5ghz";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpio {
- state_default: pinmux {
- pci_rst {
- lantiq,pins = "io21";
- lantiq,output = <1>;
- lantiq,open-drain;
- };
- };
-};
-
-&pci0 {
- status = "okay";
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- /* the power led can't be controlled, use the wps led instead */
- led-boot = &wps;
- led-failsafe = &wps;
-
- led-dsl = &dsl;
- led-internet = &internet;
- led-wifi = &wifi;
- led-usb = &led_usb0;
- led-usb2 = &led_usb2;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- /*
- power is not controllable via gpio
- */
- dsl: dsl {
- label = "tdw89x0:green:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- };
- internet: internet {
- label = "tdw89x0:green:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
- };
-
- led_usb0: usb0 {
- label = "tdw89x0:green:usb";
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- led_usb2: usb2 {
- label = "tdw89x0:green:usb2";
- gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
- };
- wps: wps {
- label = "tdw89x0:green:wps";
- gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
- };
- };
-
- wifi-leds {
- compatible = "gpio-leds";
-
- wifi: wifi {
- label = "tdw89x0:green:wifi";
- gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
- };
-
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&ath9k_cal 0xf100>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&pcie0 {
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
-
- ath9k: wifi@168c,002e {
- compatible = "pci168c,002e";
- reg = <0 0 0 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- qca,no-eeprom;
- qca,disable-5ghz;
- mtd-mac-address = <&ath9k_cal 0xf100>;
- mtd-mac-address-increment = <2>;
- };
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <33250000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x7a0000>;
- label = "firmware";
- };
-
- partition@7c0000 {
- reg = <0x7c0000 0x10000>;
- label = "config";
- read-only;
- };
-
- ath9k_cal: partition@7d0000 {
- reg = <0x7d0000 0x30000>;
- label = "boardconfig";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
- model = "BT OpenReach VDSL Modem";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_red: power2 {
- label = "vg3503j:red:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "vg3503j:green:dsl";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
- power_green: power {
- label = "vg3503j:green:power";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
- <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
-
- interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- lantiq,switch;
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,led1h = <0x70>;
- lantiq,led1l = <0x00>;
- lantiq,led2h = <0x00>;
- lantiq,led2l = <0x03>;
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- lantiq,led1h = <0x70>;
- lantiq,led1l = <0x00>;
- lantiq,led2h = <0x00>;
- lantiq,led2l = <0x03>;
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x20000>;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x20000 0x7d0000>;
- };
-
- partition@7f0000 {
- label = "uboot-env";
- reg = <0x7f0000 0x10000>;
- };
- };
- };
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &internet_green;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- dsl: dsl {
- label = "vgv7510kw22:green:dsl";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- internet_red {
- label = "vgv7510kw22:red:internet";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
-
- info_red {
- label = "vgv7510kw22:red:info";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power {
- label = "vgv7510kw22:green:power";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- info_green {
- label = "vgv7510kw22:green:info";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- internet_green: internet_green {
- label = "vgv7510kw22:green:internet";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
-
- wifi: wifi {
- label = "vgv7510kw22:green:wlan";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
-
- power_red: power2 {
- label = "vgv7510kw22:red:power";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- };
-
- phone {
- label = "vgv7510kw22:green:telefon";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>,
- <&gphy0_led0_pins>, <&gphy0_led1_pins>,
- <&gphy1_led0_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "mii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci-rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x1000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@1814,3592 {
- compatible = "pci1814,3592";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
-&pcie0 {
- status = "disabled";
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
- &gpio 31 GPIO_ACTIVE_HIGH //still unknown
- &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VGV7510KW22.dtsi"
-
-/ {
- compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
- model = "o2 Box 6431";
-
- sram@1f000000 {
- cgu@103000 {
- lantiq,phy-clk-src = <0x2>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- partitions {
- partition@0 {
- label = "Boot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Configuration";
- reg = <0x40000 0x40000>;
- read-only;
- };
-
- partition@80000 {
- label = "Certificate";
- reg = <0x80000 0x20000>;
- read-only;
- };
-
- partition@a0000 {
- label = "Special_Area";
- reg = <0xa0000 0x20000>;
- read-only;
- };
-
- partition@c0000 {
- compatible = "brnboot,root-selector";
- label = "Primary_Setting";
- reg = <0xc0000 0x20000>;
- read-only;
- };
-
- partition@e0000 {
- label = "Code_Image_0";
- reg = <0xe0000 0x780000>;
- brnboot,root-id = <0x00>;
- read-only;
- };
-
- partition@860000 {
- label = "Code_Image_1";
- reg = <0x860000 0x780000>;
- brnboot,root-id = <0x01>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VGV7510KW22.dtsi"
-
-/ {
- compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
- model = "o2 Box 6431";
-};
-
-&localbus {
- flash@0 {
- partitions {
- partition@0 {
- label = "uboot";
- reg = <0x0 0x60000>; /* 384 KiB */
- read-only;
- };
-
- partition@60000 {
- label = "uboot-env";
- reg = <0x60000 0x20000>; /* 128 KiB */
- read-only;
- };
-
- partition@80000 {
- label = "firmware";
- reg = <0x80000 0xf60000>; /* 15744 KiB */
- };
- };
- };
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &broadband_green;
- led-internet = &internet_green;
- led-wifi = &wireless_green;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- eco {
- label = "eco";
- gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
- rfkill {
- label = "rfkill";
- gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- eco {
- label = "vgv7519:blue:eco";
- gpios = <&stp 2 GPIO_ACTIVE_LOW>;
- };
- wps_red {
- label = "vgv7519:red:wps";
- gpios = <&stp 3 GPIO_ACTIVE_LOW>;
- };
- wps_green {
- label = "vgv7519:green:wps";
- gpios = <&stp 4 GPIO_ACTIVE_LOW>;
- };
- upgrade {
- label = "vgv7519:blue:upgrade";
- gpios = <&stp 5 GPIO_ACTIVE_LOW>;
- };
- tv {
- label = "vgv7519:green:tv";
- gpios = <&stp 6 GPIO_ACTIVE_LOW>;
- };
- internet_green: internet_green {
- label = "vgv7519:green:internet";
- gpios = <&stp 7 GPIO_ACTIVE_LOW>;
- };
- internet_red {
- label = "vgv7519:red:internet";
- gpios = <&stp 8 GPIO_ACTIVE_LOW>;
- };
- broadband_red {
- label = "vgv7519:red:broadband";
- gpios = <&stp 9 GPIO_ACTIVE_LOW>;
- };
- broadband_green: broadband_green {
- label = "vgv7519:green:broadband";
- gpios = <&stp 10 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "vgv7519:green:voice";
- gpios = <&stp 11 GPIO_ACTIVE_LOW>;
- };
- wireless_red {
- label = "vgv7519:red:wireless";
- gpios = <&stp 12 GPIO_ACTIVE_LOW>;
- };
- wireless_green: wireless_green {
- label = "vgv7519:green:wireless";
- gpios = <&stp 13 GPIO_ACTIVE_LOW>;
- };
- power_green: power2 {
- label = "vgv7519:green:power";
- gpios = <&stp 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power {
- label = "vgv7519:red:power";
- gpios = <&stp 15 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <1>;
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy1: ethernet-phy@1 {
- reg = <0x1>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci-rst {
- lantiq,pins = "io21";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boardconfig: partition@40000 {
- label = "board_config";
- reg = <0x40000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-
- wifi@1814,3091 {
- compatible = "pci1814,3091";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- mtd-mac-address = <&boardconfig 0x16>;
- mtd-mac-address-increment = <1>;
- };
-};
-
-&pcie0 {
- status = "disabled";
-};
-
-&stp {
- status = "okay";
- lantiq,shadow = <0xffff>;
- lantiq,groups = <0x3>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x0>;
- lantiq,phy2 = <0x0>;
- /* lantiq,rising; */
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
- &gpio 31 GPIO_ACTIVE_HIGH //still unknown
- &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VGV7519.dtsi"
-
-/ {
- compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
- model = "KPN Experiabox V8";
-};
-
-&localbus {
- flash@0 {
- partitions {
- partition@0 {
- label = "Boot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@50000 {
- label = "Certificate";
- reg = <0x50000 0x10000>;
- read-only;
- };
- partition@60000 {
- label = "Special_Area";
- reg = <0x60000 0x10000>;
- read-only;
- };
-
- partition@70000 {
- label = " Reserve_0";
- reg = <0x70000 0x10000>;
- read-only;
- };
-
- partition@80000 {
- label = "Code_Image_0";
- reg = <0x80000 0x780000>;
- brnboot,root-id = <0x00>;
- read-only;
- };
-
- partition@4000000 {
- compatible = "brnboot,root-selector";
- label = "Primary_Setting";
- reg = <0x4000000 0x10000>;
- read-only;
- };
-
- partition@4010000 {
- label = "Configuration";
- reg = <0x4010000 0x60000>;
- read-only;
- };
-
- partition@4070000 {
- label = " Reserve_1";
- reg = <0x4070000 0x10000>;
- read-only;
- };
-
- partition@4080000 {
- label = "Code_Image_1";
- reg = <0x4080000 0x780000>;
- brnboot,root-id = <0x01>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VGV7519.dtsi"
-
-/ {
- compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
- model = "KPN Experiabox V8";
-};
-
-&localbus {
- flash@0 {
- partitions {
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
- partition@60000 {
- label = "uboot_env";
- reg = <0x60000 0x10000>;
- read-only;
- };
- partition@80000 {
- label = "firmware";
- reg = <0x80000 0xf80000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VR200.dtsi"
-
-/ {
- compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9";
- model = "TP-LINK Archer VR200";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &internet;
- led-wifi = &wlan5g;
-
- led-usb = &led_usb;
- led-usb2 = &led_usb;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- led {
- label = "led";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LIGHTS_TOGGLE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "vr200:blue:power";
- gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "vr200:blue:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- internet: internet {
- label = "vr200:blue:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "vr200:blue:usb";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- };
- eth {
- label = "vr200:blue:lan";
- gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
- };
- wlan {
- label = "vr200:blue:wlan";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
- wlan5g: wifi {
- label = "vr200:blue:wlan5g";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- led_wps {
- label = "vr200:blue:wps";
- gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
- };
-};
+++ /dev/null
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x7f00000>;
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
- pinctrl-names = "default";
-
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- mtd-mac-address = <&romfile 0xf100>;
- lantiq,switch;
-
- ethernet@0 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <0>;
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
- };
- ethernet@5 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "rgmii";
- phy-handle = <&phy5>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "gmii";
- phy-handle = <&phy11>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "gmii";
- phy-handle = <&phy13>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy5: ethernet-phy@5 {
- reg = <0x5>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_GE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&pci0 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <33250000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x20000>;
- label = "u-boot";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0xf90000>;
- label = "firmware";
- };
-
- partition@fb0000 {
- reg = <0xfb0000 0x10000>;
- label = "radioDECT";
- read-only;
- };
-
- partition@fc0000 {
- reg = <0xfc0000 0x10000>;
- label = "config";
- read-only;
- };
-
- romfile: partition@fd0000 {
- reg = <0xfd0000 0x10000>;
- label = "romfile";
- read-only;
- };
-
- partition@fe0000 {
- reg = <0xfe0000 0x10000>;
- label = "rom";
- read-only;
- };
-
- partition@ff0000 {
- reg = <0xff0000 0x10000>;
- label = "radio";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "VR200.dtsi"
-
-/ {
- compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
- model = "TP-LINK Archer VR200v";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
-
- led-dsl = &dsl;
- led-internet = &internet;
- led-wifi = &wlan5g;
-
- led-usb = &led_usb;
- led-usb2 = &led_usb;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- dect_paging {
- label = "dect_paging";
- gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- power: power {
- label = "vr200v:blue:power";
- gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- dsl: dsl {
- label = "vr200v:blue:dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- internet: internet {
- label = "vr200v:blue:internet";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "vr200v:blue:usb";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- };
- eth {
- label = "vr200v:blue:lan";
- gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
- };
- wlan {
- label = "vr200v:blue:wlan";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
- wlan5g: wifi {
- label = "vr200v:blue:wlan5g";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- phone {
- label = "vr200v:blue:phone";
- gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&vmmc {
- status = "okay";
- gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
- &gpio 31 GPIO_ACTIVE_HIGH //still unknown
- &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
-};
+++ /dev/null
-/dts-v1/;
-
-#include "ar9.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
- model = "Buffalo WBMR-HP-G300H";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
-
- led-dsl = &dsl;
- led-internet = &online_green;
- led-usb = &led_usb;
- led-wifi = &wifi;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- eject {
- label = "eject";
- gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_EJECTCD>;
- };
- movie {
- label = "movie";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VIDEO>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_green: power {
- label = "wbmr:green:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power_red: power2 {
- label = "wbmr:red:power";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- };
- security {
- label = "wbmr:yellow:security";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "wbmr:green:wireless";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "wbmr:green:dsl";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
- online_green: online {
- label = "wbmr:green:internet";
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "wbmr:red:internet";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- };
- movie {
- label = "wbmr:blue:movie";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- led_usb: usb {
- label = "wbmr:green:usb";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- pci-in {
- lantiq,groups = "req1";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
- pci-out {
- lantiq,groups = "gnt1";
- lantiq,output = <1>;
- lantiq,pull = <0>;
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&gsw {
- phy-mode = "rgmii";
- mtd-mac-address = <&boardconfig 0x10024>;
-};
-
-&pci0 {
- status = "okay";
-};
-
-&localbus {
- flash@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "firmware";
- reg = <0x60000 0x1f20000>;
- };
-
- boardconfig: partition@1fc0000 {
- label = "board";
- reg = <0x1fc0000 0x20000>;
- read-only;
- };
-
- partition@1fe0000 {
- label = "calibration";
- reg = <0x1fe0000 0x20000>;
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "vr9.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mips/lantiq_rcu_gphy.h>
-
-/ {
- compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
- model = "Buffalo WBMR-300HPD";
-
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
-
- aliases {
- led-boot = &power_g;
- led-failsafe = &diag_r;
- led-running = &power_g;
- led-upgrade = &power_g;
-
- led-dsl = &dsl;
- led-internet = &router_g;
- led-wifi = &wifi_g;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- power {
- label = "power";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- auto {
- label = "auto";
- gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- router {
- label = "router";
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- diag_r: diag_r {
- label = "wbmr300:red:diag";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default_state = "off";
- };
-
- wifi_g: wifi_g {
- label = "wbmr300:green:wifi";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
-
- dsl: dsl {
- label = "dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
- };
-
- router_y: router_y {
- label = "wbmr300:yellow:router";
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
-
- wifi_y: wifi_y {
- label = "wbmr300:yellow:wifi";
- gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
- };
-
- lan1: lan1 {
- label = "wbmr300:green:lan1";
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan: wan {
- label = "wbmr300:green:wan";
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- };
-
- lan3: lan3 {
- label = "wbmr300:green:lan3";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- };
-
- lan2: lan2 {
- label = "wbmr300:green:lan2";
- gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
- };
-
- internet_g: internet_g {
- label = "wbmr300:green:internet";
- gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
- };
-
- internet_y: internet_y {
- label = "wbmr300:yellow:internet";
- gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
- };
-
- router_g: router_g {
- label = "wbmr300:green:router";
- gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
- };
-
- power_g: power_g {
- label = "wbmr300:green:power";
- gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb_vbus: regulator-usb-vbus {
- compatible = "regulator-fixed";
-
- regulator-name = "USB_VBUS";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-};
-
-ð0 {
- lan: interface@0 {
- compatible = "lantiq,xrx200-pdi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- lantiq,switch;
-
- ethernet@1 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <4>;
- phy-mode = "mii";
- phy-handle = <&phy13>;
- };
- ethernet@2 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <5>;
- phy-mode = "mii";
- phy-handle = <&phy14>;
- };
- ethernet@3 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <2>;
- phy-mode = "mii";
- phy-handle = <&phy11>;
- };
- ethernet@4 {
- compatible = "lantiq,xrx200-pdi-port";
- reg = <3>;
- phy-mode = "mii";
- phy-handle = <&phy12>;
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-mdio";
-
- phy11: ethernet-phy@11 {
- reg = <0x11>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <0x12>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <0x13>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <0x14>;
- compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
- };
- };
-};
-
-&gphy0 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gphy1 {
- lantiq,gphy-mode = <GPHY_MODE_FE>;
-};
-
-&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinmux {
- phy-rst {
- lantiq,pins = "io42";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- pcie-rst {
- lantiq,pins = "io38";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- };
-};
-
-&spi {
- status = "okay";
-
- flash@4 {
- compatible = "jedec,spi-nor";
- reg = <4>;
- spi-max-frequency = <20000000>;
-
- partitions {
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x10000>;
- label = "u-boot";
- read-only;
- };
-
- partition@10000 {
- reg = <0x10000 0x10000>;
- label = "gphyfirmware";
- read-only;
- };
-
- partition@20000 {
- reg = <0x20000 0x80000>;
- label = "dsl_fw";
- };
-
- partition@de0000 {
- reg = <0xa0000 0xf40000>;
- label = "firmware";
- };
-
- partition@fe0000 {
- reg = <0xfe0000 0x10000>;
- label = "sysconfig";
- read-only;
- };
-
- partition@ff0000 {
- reg = <0xff0000 0x2000>;
- label = "ubootconfig";
- };
-
- partition@ff3000 {
- reg = <0xff3000 0x2000>;
- label = "board_config";
- read-only;
- };
- };
- };
-};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
-
-&usb1 {
- status = "okay";
- vbus-supply = <&usb_vbus>;
-};
+++ /dev/null
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xway", "lantiq,ase";
-
- aliases {
- serial0 = &asc1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "mips,mips4Kc";
- reg = <0>;
- };
- };
-
- reboot {
- compatible = "syscon-reboot";
-
- regmap = <&rcu0>;
- offset = <0x10>;
- mask = <0x40000000>;
- };
-
- biu@1f800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,biu", "simple-bus";
- reg = <0x1f800000 0x800000>;
- ranges = <0x0 0x1f800000 0x7fffff>;
-
- icu0: icu@80200 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
- };
-
- watchdog@803f0 {
- compatible = "lantiq,wdt";
- reg = <0x803f0 0x10>;
- };
- };
-
- sram@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sram", "simple-bus";
- reg = <0x1f000000 0x800000>;
- ranges = <0x0 0x1f000000 0x7fffff>;
-
- eiu0: eiu@101000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,eiu-xway";
- reg = <0x101000 0x1000>;
- interrupt-parent = <&icu0>;
- lantiq,eiu-irqs = <29 30 31>;
- };
-
- pmu0: pmu@102000 {
- compatible = "lantiq,pmu-xway";
- reg = <0x102000 0x1000>;
- };
-
- cgu0: cgu@103000 {
- compatible = "lantiq,cgu-xway";
- reg = <0x103000 0x1000>;
- #clock-cells = <1>;
- };
-
- rcu0: rcu@203000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
- reg = <0x203000 0x1000>;
- ranges = <0x0 0x203000 0x100>;
- big-endian;
-
- reset: reset-controller@10 {
- compatible = "lantiq,danube-reset";
- reg = <0x10 4>, <0x14 4>;
-
- #reset-cells = <2>;
- };
-
- usb_phy: usb2-phy@18 {
- compatible = "lantiq,ase-usb2-phy";
- reg = <0x18 4>;
- status = "disabled";
-
- resets = <&reset 4 4>;
- reset-names = "ctrl";
- #phy-cells = <0>;
- };
- };
- };
-
- fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xeefffff>;
- reg = <0x10000000 0xef00000>;
-
- localbus: localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
- };
-
- spi: spi@e100800 {
- compatible = "lantiq,ase-spi";
- reg = <0xe100800 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <24 25 26>;
- interrupt-names = "spi_rx", "spi_tx", "spi_err",
- "spi_frm";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
- status = "disabled";
- };
-
- gptu@e100a00 {
- compatible = "lantiq,gptu-xway";
- reg = <0xe100a00 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <33 34 35 36 37 38>;
- };
-
- gpio: pinmux@e100b10 {
- compatible = "lantiq,ase-pinctrl";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe100b10 0xa0>;
-
- asc_pins: asc-pins {
- mux {
- lantiq,groups = "asc";
- lantiq,function = "asc";
- };
- };
-
- mdio_pins: mdio {
- mux {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- };
-
- spi_pins: spi {
- mux-0 {
- lantiq,groups = "spi_di";
- lantiq,function = "spi";
- };
- mux-1 {
- lantiq,groups = "spi_do", "spi_clk";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
-
- spi_cs4_pins: spi-cs4 {
- mux {
- lantiq,groups = "spi_cs4";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
- };
-
- asc1: serial@e100c00 {
- compatible = "lantiq,asc";
- reg = <0xe100c00 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <72 74 75>;
- pinctrl-0 = <&asc_pins>;
- pinctrl-names = "default";
- };
-
- mei@e116000 {
- compatible = "lantiq,mei-xway";
- reg = <0xe116000 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <81>;
- };
-
- usb: usb@e101000 {
- compatible = "lantiq,ase-usb";
- reg = <0xe101000 0x1000
- 0xe120000 0x3f000>;
- interrupt-parent = <&icu0>;
- interrupts = <39>;
- dr_mode = "host";
- phys = <&usb_phy>;
- phy-names = "usb2-phy";
- status = "disabled";
- };
-
- dma0: dma@e104100 {
- compatible = "lantiq,dma-xway";
- reg = <0xe104100 0x800>;
- };
-
- ebu0: ebu@e105300 {
- compatible = "lantiq,ebu-xway";
- reg = <0xe105300 0x100>;
- };
-
- ppe@e234000 {
- compatible = "lantiq,ppe-ase";
- reg = <0xe234000 0x40000>;
- interrupt-parent = <&icu0>;
- interrupts = <85>;
- };
-
- gsw: etop@e180000 {
- compatible = "lantiq,etop-xway";
- reg = <0xe180000 0x40000>;
- interrupt-parent = <&icu0>;
- interrupts = <105 109>;
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
- };
-
- adsl {
- compatible = "lantiq,adsl-ase";
- };
-};
+++ /dev/null
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xway", "lantiq,ar9";
-
- aliases {
- serial0 = &asc1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "mips,mips34K";
- reg = <0>;
- };
- };
-
- reboot {
- compatible = "syscon-reboot";
-
- regmap = <&rcu0>;
- offset = <0x10>;
- mask = <0x40000000>;
- };
-
- biu@1f800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,biu", "simple-bus";
- reg = <0x1f800000 0x800000>;
- ranges = <0x0 0x1f800000 0x7fffff>;
-
- icu0: icu@80200 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
- };
-
- watchdog@803f0 {
- compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
- reg = <0x803f0 0x10>;
-
- regmap = <&rcu0>;
- };
- };
-
- sram@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sram", "simple-bus";
- reg = <0x1f000000 0x800000>;
- ranges = <0x0 0x1f000000 0x7fffff>;
-
- eiu0: eiu@101000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,eiu-xway";
- reg = <0x101000 0x1000>;
- interrupt-parent = <&icu0>;
- lantiq,eiu-irqs = <166 135 66 40 41 42>;
- };
-
- pmu0: pmu@102000 {
- compatible = "lantiq,pmu-xway";
- reg = <0x102000 0x1000>;
- };
-
- cgu0: cgu@103000 {
- compatible = "lantiq,cgu-xway";
- reg = <0x103000 0x1000>;
- #clock-cells = <1>;
- };
-
- rcu0: rcu@203000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
- reg = <0x203000 0x1000>;
- ranges = <0x0 0x203000 0x100>;
- big-endian;
-
- reset: reset-controller@10 {
- compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
- reg = <0x10 4>, <0x14 4>;
-
- #reset-cells = <2>;
- };
-
- usb_phy0: usb2-phy@18 {
- compatible = "lantiq,xrx100-usb2-phy";
- reg = <0x18 4>;
- status = "disabled";
-
- resets = <&reset 4 4>;
- reset-names = "ctrl";
- #phy-cells = <0>;
- };
-
- usb_phy1: usb2-phy@34 {
- compatible = "lantiq,xrx100-usb2-phy";
- reg = <0x34 4>;
- status = "disabled";
-
- resets = <&reset 28 28>;
- reset-names = "ctrl";
- #phy-cells = <0>;
- };
- };
- };
-
- fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xeefffff>;
- reg = <0x10000000 0xef00000>;
-
- localbus: localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
- };
-
- gptu@e100a00 {
- compatible = "lantiq,gptu-xway";
- reg = <0xe100a00 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <126 127 128 129 130 131>;
- };
-
- asc0: serial@e100400 {
- compatible = "lantiq,asc";
- reg = <0xe100400 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <104 105 106>;
- status = "disabled";
- };
-
- spi: spi@e100800 {
- compatible = "lantiq,xrx100-spi";
- reg = <0xe100800 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <22 23 24>;
- interrupt-names = "spi_rx", "spi_tx", "spi_err",
- "spi_frm";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
- status = "disabled";
- };
-
- gpio: pinmux@e100b10 {
- compatible = "lantiq,xrx100-pinctrl";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe100b10 0xa0>;
-
- mdio_pins: mdio {
- mux {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- };
-
- nand_pins: nand {
- mux-0 {
- lantiq,groups = "nand cle", "nand ale",
- "nand rd";
- lantiq,function = "ebu";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- mux-1 {
- lantiq,groups = "nand rdy";
- lantiq,function = "ebu";
- lantiq,output = <0>;
- lantiq,pull = <2>;
- };
- };
-
- nand_cs1_pins: nand-cs1 {
- mux {
- lantiq,groups = "nand cs1";
- lantiq,function = "ebu";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- };
-
- pci_gnt1_pins: pci-gnt1 {
- lantiq,groups = "gnt1";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_gnt2_pins: pci-gnt2 {
- lantiq,groups = "gnt2";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_gnt3_pins: pci-gnt3 {
- lantiq,groups = "gnt3";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_gnt4_pins: pci-gnt4 {
- lantiq,groups = "gnt4";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_req1_pins: pci-req1 {
- lantiq,groups = "req1";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- pci_req2_pins: pci-req2 {
- lantiq,groups = "req2";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- pci_req3_pins: pci-req3 {
- lantiq,groups = "req3";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- pci_req4_pins: pci-req4 {
- lantiq,groups = "req4";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- spi_pins: spi {
- mux-0 {
- lantiq,groups = "spi_di";
- lantiq,function = "spi";
- };
- mux-1 {
- lantiq,groups = "spi_do", "spi_clk";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
-
- spi_cs4_pins: spi-cs4 {
- mux {
- lantiq,groups = "spi_cs4";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
-
- stp_pins: stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- };
-
- stp: stp@e100bb0 {
- #gpio-cells = <2>;
- compatible = "lantiq,gpio-stp-xway";
- gpio-controller;
- reg = <0xe100bb0 0x40>;
-
- pinctrl-0 = <&stp_pins>;
- pinctrl-names = "default";
-
- status = "disabled";
- };
-
- asc1: serial@e100c00 {
- compatible = "lantiq,asc";
- reg = <0xe100c00 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <112 113 114>;
- };
-
- usb0: usb@e101000 {
- compatible = "lantiq,arx100-usb";
- reg = <0xe101000 0x1000
- 0xe120000 0x3f000>;
- interrupt-parent = <&icu0>;
- interrupts = <62 91>;
- dr_mode = "host";
- phys = <&usb_phy0>;
- phy-names = "usb2-phy";
- status = "disabled";
- };
-
- usb1: usb@e106000 {
- compatible = "lantiq,arx100-usb";
- reg = <0xe106000 0x1000
- 0xe1e0000 0x3f000>;
- interrupt-parent = <&icu0>;
- interrupts = <91>;
- dr_mode = "host";
- phys = <&usb_phy1>;
- phy-names = "usb2-phy";
- status = "disabled";
- };
-
- deu@e103100 {
- compatible = "lantiq,deu-arx100";
- reg = <0xe103100 0xf00>;
- };
-
- dma0: dma@e104100 {
- compatible = "lantiq,dma-xway";
- reg = <0xe104100 0x800>;
- };
-
- ebu0: ebu@e105300 {
- compatible = "lantiq,ebu-xway";
- reg = <0xe105300 0x100>;
- };
-
- mei@e116000 {
- compatible = "lantiq,mei-xway";
- reg = <0xe116000 0x9c>;
- interrupt-parent = <&icu0>;
- interrupts = <63>;
- };
-
- gsw: etop@e180000 {
- compatible = "lantiq,etop-xway";
- reg = <0xe180000 0x40000
- 0xe108000 0x200>;
- interrupt-parent = <&icu0>;
- interrupts = <73 72>;
- mac-address = [ 00 11 22 33 44 55 ];
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ppe@e234000 {
- compatible = "lantiq,ppe-arx100";
- reg = <0xe234000 0x3ffd>;
- interrupt-parent = <&icu0>;
- interrupts = <96>;
- };
-
- pci0: pci@e105400 {
- status = "disabled";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- compatible = "lantiq,pci-xway";
- bus-range = <0x0 0x0>;
- ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
- reg = <0x7000000 0x8000 /* config space */
- 0xe105400 0x400>; /* pci bridge */
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
- req-mask = <0x1>;
- };
- };
-
- adsl {
- compatible = "lantiq,adsl-arx100";
- };
-};
+++ /dev/null
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xway", "lantiq,danube";
-
- aliases {
- serial0 = &asc1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "mips,mips24Kc";
- reg = <0>;
- };
- };
-
- reboot {
- compatible = "syscon-reboot";
-
- regmap = <&rcu0>;
- offset = <0x10>;
- mask = <0x40000000>;
- };
-
- biu@1f800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,biu", "simple-bus";
- reg = <0x1f800000 0x800000>;
- ranges = <0x0 0x1f800000 0x7fffff>;
-
- icu0: icu@80200 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
- };
-
- watchdog@803f0 {
- compatible = "lantiq,wdt";
- reg = <0x803f0 0x10>;
- };
- };
-
- sram@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sram", "simple-bus";
- reg = <0x1f000000 0x800000>;
- ranges = <0x0 0x1f000000 0x7fffff>;
-
- eiu0: eiu@101000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,eiu-xway";
- reg = <0x101000 0x1000>;
- interrupt-parent = <&icu0>;
- lantiq,eiu-irqs = <166 135 66>;
- };
-
- pmu0: pmu@102000 {
- compatible = "lantiq,pmu-xway";
- reg = <0x102000 0x1000>;
- };
-
- cgu0: cgu@103000 {
- compatible = "lantiq,cgu-xway";
- reg = <0x103000 0x1000>;
- #clock-cells = <1>;
- };
-
- vmmc: vmmc@107000 {
- status = "disabled";
- compatible = "lantiq,vmmc-xway";
- reg = <0x107000 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <150 151 152 153 154 155>;
- };
-
- rcu0: rcu@203000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
- reg = <0x203000 0x1000>;
- ranges = <0x0 0x203000 0x100>;
- big-endian;
-
- reset: reset-controller@10 {
- compatible = "lantiq,danube-reset";
- reg = <0x10 4>, <0x14 4>;
-
- #reset-cells = <2>;
- };
-
- usb_phy: usb2-phy@18 {
- compatible = "lantiq,danube-usb2-phy";
- reg = <0x18 4>;
- status = "disabled";
-
- resets = <&reset 4 4>;
- reset-names = "ctrl";
- #phy-cells = <0>;
- };
- };
- };
-
- fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xeefffff>;
- reg = <0x10000000 0xef00000>;
-
- localbus: localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
- };
-
- gptu@e100a00 {
- compatible = "lantiq,gptu-xway";
- reg = <0xe100a00 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <126 127 128 129 130 131>;
- };
-
- gpios: stp@e100bb0 {
- #gpio-cells = <2>;
- compatible = "lantiq,gpio-stp-xway";
- gpio-controller;
- reg = <0xe100bb0 0x40>;
-
- pinctrl-0 = <&stp_pins>;
- pinctrl-names = "default";
-
- lantiq,shadow = <0xfff>;
- lantiq,groups = <0x3>;
- status = "disabled";
- };
-
- asc0: serial@e100400 {
- compatible = "lantiq,asc";
- reg = <0xe100400 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <104 105 106>;
- status = "disabled";
- };
-
- gpio: pinmux@e100b10 {
- compatible = "lantiq,danube-pinctrl";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe100b10 0xa0>;
-
- nand_pins: nand {
- mux-0 {
- lantiq,groups = "nand cle", "nand ale",
- "nand rd";
- lantiq,function = "ebu";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- mux-1 {
- lantiq,groups = "nand rdy";
- lantiq,function = "ebu";
- lantiq,output = <0>;
- lantiq,pull = <2>;
- };
- };
-
- nand_cs1_pins: nand-cs1 {
- mux {
- lantiq,groups = "nand cs1";
- lantiq,function = "ebu";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- };
-
- pci_gnt1_pins: pci-gnt1 {
- lantiq,groups = "gnt1";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_gnt2_pins: pci-gnt2 {
- lantiq,groups = "gnt2";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_req1_pins: pci-req1 {
- lantiq,groups = "req1";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- pci_req2_pins: pci-req2 {
- lantiq,groups = "req2";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- stp_pins: stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- };
-
- asc1: serial@e100c00 {
- compatible = "lantiq,asc";
- reg = <0xe100c00 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <112 113 114>;
- };
-
- usb: usb@e101000 {
- compatible = "lantiq,danube-usb";
- reg = <0xe101000 0x1000
- 0xe120000 0x3f000>;
- interrupt-parent = <&icu0>;
- interrupts = <62>;
- dr_mode = "host";
- phys = <&usb_phy>;
- phy-names = "usb2-phy";
- status = "disabled";
- };
-
- deu@e103100 {
- compatible = "lantiq,deu-danube";
- reg = <0xe103100 0xf00>;
- };
-
- dma0: dma@e104100 {
- compatible = "lantiq,dma-xway";
- reg = <0xe104100 0x800>;
- };
-
- ebu0: ebu@e105300 {
- compatible = "lantiq,ebu-xway";
- reg = <0xe105300 0x100>;
- };
-
- mei@e116000 {
- compatible = "lantiq,mei-xway";
- reg = <0xe116000 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <63>;
- };
-
- gsw: etop@e180000 {
- compatible = "lantiq,etop-xway";
- reg = <0xe180000 0x40000>;
- interrupt-parent = <&icu0>;
- interrupts = <73 78>;
- mac-address = [ 00 11 22 33 44 55 ];
- };
-
- ppe@e234000 {
- compatible = "lantiq,ppe-danube";
- reg = <0xe234000 0x40000>;
- interrupt-parent = <&icu0>;
- interrupts = <96>;
- };
-
- pci0: pci@e105400 {
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- compatible = "lantiq,pci-xway";
- bus-range = <0x0 0x0>;
- ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
- reg = <0x7000000 0x8000 /* config space */
- 0xe105400 0x400>; /* pci bridge */
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
- req-mask = <0x1>; /* GNT1 */
- };
- };
-
- adsl {
- compatible = "lantiq,adsl-danube";
- };
-};
+++ /dev/null
-
-&ebu_cs0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sflash-falcon", "simple-bus";
-
- flash@0 {
- compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
- reg = <0 0>;
- linux,mtd-name = "sflash";
- spi-max-frequency = <80000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x40000>;
- label = "uboot";
- read-only;
- };
-
- partition@40000 {
- reg = <0x40000 0x80000>;
- label = "uboot_env";
- };
-
- partition@c0000 {
- reg = <0xc0000 0x740000>;
- label = "image0";
- };
-
- partition@800000 {
- reg = <0x800000 0x800000>;
- label = "image1";
- };
- };
- };
-};
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,falcon";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "mips,mips34kc";
- reg = <0>;
- };
- };
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- gpio4 = &gpio4;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- ebu_cs0: localbus@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,localbus", "simple-bus";
- reg = <0x10000000 0x4000000>;
- ranges = <0x0 0x10000000 0x4000000>;
- };
- ebu_cs1: localbus@14000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,localbus", "simple-bus";
- reg = <0x14000000 0x4000000>;
- ranges = <0x0 0x14000000 0x4000000>;
- };
-
- ebu@18000000 {
- compatible = "lantiq,ebu-falcon";
- reg = <0x18000000 0x100>;
- };
-
- sbs2@1d000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sysb2", "simple-bus";
- reg = <0x1d000000 0x1000000>;
- ranges = <0x0 0x1d000000 0x1000000>;
-
- clock_sysgpe: clock-controller@700000 {
- compatible = "lantiq,sysgpe-falcon";
- reg = <0x700000 0x100>;
- #clock-cells = <1>;
- };
-
- mps@4000 {
- compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&icu0>;
- interrupts = <154 155>;
- lantiq,mbx = <&mpsmbx>;
- };
-
- gpio0: gpio@810000 {
- compatible = "lantiq,falcon-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&icu0>;
- interrupts = <44>;
- reg = <0x810000 0x80>;
- clocks = <&clock_syseth 16>;
- };
-
- gpio2: gpio@810100 {
- compatible = "lantiq,falcon-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&icu0>;
- interrupts = <46>;
- reg = <0x810100 0x80>;
- clocks = <&clock_syseth 17>;
- };
-
- clock_syseth: clock-controller@b00000 {
- compatible = "lantiq,syseth-falcon";
- reg = <0xb00000 0x100>;
- #clock-cells = <1>;
- };
-
- pad@b01000 {
- compatible = "lantiq,pad-falcon";
- reg = <0xb01000 0x100>;
- lantiq,bank = <0>;
- clocks = <&clock_syseth 20>;
- };
-
- pad@b02000 {
- compatible = "lantiq,pad-falcon";
- reg = <0xb02000 0x100>;
- lantiq,bank = <2>;
- clocks = <&clock_syseth 21>;
- };
- };
-
- fpi@1e000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- reg = <0x1e000000 0x1000000>;
- ranges = <0x0 0x1e000000 0x1000000>;
-
- serial1: serial@100b00 {
- status = "disabled";
- compatible = "lantiq,asc";
- reg = <0x100b00 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <112 113 114>;
- line = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&asc1_pins>;
- clocks = <&clock_sys1 11>;
- };
-
- serial0: serial@100c00 {
- compatible = "lantiq,asc";
- reg = <0x100c00 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <104 105 106>;
- line = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&asc0_pins>;
- clocks = <&clock_sys1 12>;
- };
-
- spi: spi@100d00 {
- status = "disabled";
- compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
- interrupts = <22 23 24 25>;
- interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x100d00 0x100>;
- interrupt-parent = <&icu0>;
- clocks = <&clock_sys1 13>;
- base_cs = <1>;
- num_cs = <2>;
- };
-
- gptc@100e00 {
- compatible = "lantiq,gptc-falcon";
- reg = <0x100e00 0x100>;
- };
-
- i2c: i2c@200000 {
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,lantiq-i2c";
- reg = <0x200000 0x10000>;
- interrupt-parent = <&icu0>;
- interrupts = <18 19 20 21>;
- gpios = <&gpio1 7 0 &gpio1 8 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_pins>;
- clocks = <&clock_sys1 14>;
- };
-
- gpio1: gpio@800100 {
- compatible = "lantiq,falcon-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&icu0>;
- interrupts = <45>;
- reg = <0x800100 0x100>;
- clocks = <&clock_sys1 16>;
- };
-
- gpio3: gpio@800200 {
- compatible = "lantiq,falcon-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&icu0>;
- interrupts = <47>;
- reg = <0x800200 0x100>;
- clocks = <&clock_sys1 17>;
- };
-
- gpio4: gpio@800300 {
- compatible = "lantiq,falcon-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&icu0>;
- interrupts = <48>;
- reg = <0x800300 0x100>;
- clocks = <&clock_sys1 18>;
- };
-
- pad@800400 {
- compatible = "lantiq,pad-falcon";
- reg = <0x800400 0x100>;
- lantiq,bank = <1>;
- clocks = <&clock_sys1 20>;
- };
-
- pad@800500 {
- compatible = "lantiq,pad-falcon";
- reg = <0x800500 0x100>;
- lantiq,bank = <3>;
- clocks = <&clock_sys1 21>;
- };
-
- pad@800600 {
- compatible = "lantiq,pad-falcon";
- reg = <0x800600 0x100>;
- lantiq,bank = <4>;
- clocks = <&clock_sys1 22>;
- };
-
- status@802000 {
- compatible = "lantiq,status-falcon";
- reg = <0x802000 0x80>;
- };
-
- clock_sys1: clock-controller@f00000 {
- compatible = "lantiq,sys1-falcon";
- reg = <0xf00000 0x100>;
- #clock-cells = <1>;
- };
- };
-
- sbs0@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- reg = <0x1f000000 0x400000>;
- ranges = <0x0 0x1f000000 0x400000>;
-
- mpsmbx: mpsmbx@200000 {
- reg = <0x200000 0x200>;
- };
- };
-
- biu@1f800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,biu", "simple-bus";
- reg = <0x1f800000 0x800000>;
- ranges = <0x0 0x1f800000 0x800000>;
-
- icu0: icu@80200 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
- };
-
- watchdog@803f0 {
- compatible = "lantiq,wdt";
- reg = <0x803f0 0x10>;
- };
- };
-
- pinctrl {
- compatible = "lantiq,pinctrl-falcon";
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinctrl0 {
- /*ntr {
- lantiq,groups = "ntr8k";
- lantiq,function = "ntr";
- };*/
- hrst {
- lantiq,groups = "hrst";
- lantiq,function = "rst";
- };
- };
-
- asc0_pins: asc0 {
- asc0 {
- lantiq,groups = "asc0";
- lantiq,function = "asc";
- };
- };
- asc1_pins: asc1 {
- asc1 {
- lantiq,groups = "asc1";
- lantiq,function = "asc";
- };
- };
- i2c_pins: i2c_pins {
- i2c_pins {
- lantiq,groups = "i2c";
- lantiq,function = "i2c";
- };
- };
- bootled_pins: bootled {
- bootled {
- lantiq,groups = "bootled";
- lantiq,function = "led";
- };
- };
- ntr_ntr8k: ntr8k {
- ntr8k {
- lantiq,groups = "ntr8k";
- lantiq,function = "ntr";
- };
- };
- ntr_pps: pps {
- pps {
- lantiq,groups = "pps";
- lantiq,function = "ntr";
- };
- };
- ntr_gpio: gpio {
- gpio {
- lantiq,pins = "io5";
- lantiq,mux = <1>;
- lantiq,output = <0>;
- };
- };
- slic_pins: slic {
- slic {
- lantiq,groups = "slic";
- lantiq,function = "slic";
- };
- };
- };
-
- pinselect-ntr {
- compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
- pinctrl-names = "ntr8k", "pps", "gpio";
- pinctrl-0 = <&ntr_ntr8k>;
- pinctrl-1 = <&ntr_pps>;
- pinctrl-2 = <&ntr_gpio>;
- };
-
- pinselect-asc1 {
- compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
- pinctrl-names = "default", "asc1";
- pinctrl-0 = <&slic_pins>;
- pinctrl-1 = <&asc1_pins>;
- };
-
-};
--- /dev/null
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,ase";
+
+ aliases {
+ serial0 = &asc1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips4Kc";
+ reg = <0>;
+ };
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+
+ regmap = <&rcu0>;
+ offset = <0x10>;
+ mask = <0x40000000>;
+ };
+
+ biu@1f800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803f0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803f0 0x10>;
+ };
+ };
+
+ sram@1f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram", "simple-bus";
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ interrupt-parent = <&icu0>;
+ lantiq,eiu-irqs = <29 30 31>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
+ reg = <0x203000 0x1000>;
+ ranges = <0x0 0x203000 0x100>;
+ big-endian;
+
+ reset: reset-controller@10 {
+ compatible = "lantiq,danube-reset";
+ reg = <0x10 4>, <0x14 4>;
+
+ #reset-cells = <2>;
+ };
+
+ usb_phy: usb2-phy@18 {
+ compatible = "lantiq,ase-usb2-phy";
+ reg = <0x18 4>;
+ status = "disabled";
+
+ resets = <&reset 4 4>;
+ reset-names = "ctrl";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
+
+ localbus: localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+ };
+
+ spi: spi@e100800 {
+ compatible = "lantiq,ase-spi";
+ reg = <0xe100800 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <24 25 26>;
+ interrupt-names = "spi_rx", "spi_tx", "spi_err",
+ "spi_frm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
+ status = "disabled";
+ };
+
+ gptu@e100a00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xe100a00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <33 34 35 36 37 38>;
+ };
+
+ gpio: pinmux@e100b10 {
+ compatible = "lantiq,ase-pinctrl";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe100b10 0xa0>;
+
+ asc_pins: asc-pins {
+ mux {
+ lantiq,groups = "asc";
+ lantiq,function = "asc";
+ };
+ };
+
+ mdio_pins: mdio {
+ mux {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ };
+
+ spi_pins: spi {
+ mux-0 {
+ lantiq,groups = "spi_di";
+ lantiq,function = "spi";
+ };
+ mux-1 {
+ lantiq,groups = "spi_do", "spi_clk";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+
+ spi_cs4_pins: spi-cs4 {
+ mux {
+ lantiq,groups = "spi_cs4";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+ };
+
+ asc1: serial@e100c00 {
+ compatible = "lantiq,asc";
+ reg = <0xe100c00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <72 74 75>;
+ pinctrl-0 = <&asc_pins>;
+ pinctrl-names = "default";
+ };
+
+ mei@e116000 {
+ compatible = "lantiq,mei-xway";
+ reg = <0xe116000 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <81>;
+ };
+
+ usb: usb@e101000 {
+ compatible = "lantiq,ase-usb";
+ reg = <0xe101000 0x1000
+ 0xe120000 0x3f000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <39>;
+ dr_mode = "host";
+ phys = <&usb_phy>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ dma0: dma@e104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xe104100 0x800>;
+ };
+
+ ebu0: ebu@e105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xe105300 0x100>;
+ };
+
+ ppe@e234000 {
+ compatible = "lantiq,ppe-ase";
+ reg = <0xe234000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <85>;
+ };
+
+ gsw: etop@e180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xe180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <105 109>;
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ adsl {
+ compatible = "lantiq,adsl-ase";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+/ {
+ compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
+ model = "Allnet ALL0333CJ DSL Modem";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &online_green;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x1000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* power led: red=off, green=on */
+ power: power {
+ label = "all0333cj:green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ lan: lan {
+ label = "all0333cj:green:lan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ dsl: dsl {
+ label = "all0333cj:green:dsl";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ online_green: online {
+ label = "all0333cj:green:online";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ online_red {
+ label = "all0333cj:red:online";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ keys_in {
+ lantiq,pins = "io0",/* "io25", */"io29";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <1>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x400000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "firmware";
+ reg = <0x10000 0x3ef200>;
+ };
+
+ partition@3ff200 {
+ label = "uboot_env";
+ reg = <0x3ff200 0xc00>;
+ read-only;
+ };
+
+ partition@3ffe00 {
+ label = "dummy_bits";
+ reg = <0x3ffe00 0x200>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
+ model = "Netgear DGN1000B";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &online_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x1000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ dsl: dsl {
+ label = "dgn1000b:green:dsl";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ online_green: online {
+ label = "dgn1000b:green:online";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ online2 {
+ label = "dgn1000b:red:online";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ wps {
+ label = "dgn1000b:green:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ power: power {
+ label = "dgn1000b:green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ /*
+ power red is missing
+ */
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ keys_in {
+ lantiq,pins = "io0",/* "io25", */"io29";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <1>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mac-address = [ 00 11 22 33 44 55 ];
+};
+
+&spi {
+ status = "okay";
+
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <5000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "ENV_MAC";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "DPF";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "NVRAM";
+ read-only;
+ };
+
+ partition@500000 {
+ reg = <0x50000 0x003a0000>;
+ label = "kernel";
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
--- /dev/null
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,ar9";
+
+ aliases {
+ serial0 = &asc1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips34K";
+ reg = <0>;
+ };
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+
+ regmap = <&rcu0>;
+ offset = <0x10>;
+ mask = <0x40000000>;
+ };
+
+ biu@1f800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803f0 {
+ compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
+ reg = <0x803f0 0x10>;
+
+ regmap = <&rcu0>;
+ };
+ };
+
+ sram@1f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram", "simple-bus";
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ interrupt-parent = <&icu0>;
+ lantiq,eiu-irqs = <166 135 66 40 41 42>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
+ reg = <0x203000 0x1000>;
+ ranges = <0x0 0x203000 0x100>;
+ big-endian;
+
+ reset: reset-controller@10 {
+ compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
+ reg = <0x10 4>, <0x14 4>;
+
+ #reset-cells = <2>;
+ };
+
+ usb_phy0: usb2-phy@18 {
+ compatible = "lantiq,xrx100-usb2-phy";
+ reg = <0x18 4>;
+ status = "disabled";
+
+ resets = <&reset 4 4>;
+ reset-names = "ctrl";
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: usb2-phy@34 {
+ compatible = "lantiq,xrx100-usb2-phy";
+ reg = <0x34 4>;
+ status = "disabled";
+
+ resets = <&reset 28 28>;
+ reset-names = "ctrl";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
+
+ localbus: localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+ };
+
+ gptu@e100a00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xe100a00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <126 127 128 129 130 131>;
+ };
+
+ asc0: serial@e100400 {
+ compatible = "lantiq,asc";
+ reg = <0xe100400 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <104 105 106>;
+ status = "disabled";
+ };
+
+ spi: spi@e100800 {
+ compatible = "lantiq,xrx100-spi";
+ reg = <0xe100800 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <22 23 24>;
+ interrupt-names = "spi_rx", "spi_tx", "spi_err",
+ "spi_frm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
+ status = "disabled";
+ };
+
+ gpio: pinmux@e100b10 {
+ compatible = "lantiq,xrx100-pinctrl";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe100b10 0xa0>;
+
+ mdio_pins: mdio {
+ mux {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ };
+
+ nand_pins: nand {
+ mux-0 {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd";
+ lantiq,function = "ebu";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ mux-1 {
+ lantiq,groups = "nand rdy";
+ lantiq,function = "ebu";
+ lantiq,output = <0>;
+ lantiq,pull = <2>;
+ };
+ };
+
+ nand_cs1_pins: nand-cs1 {
+ mux {
+ lantiq,groups = "nand cs1";
+ lantiq,function = "ebu";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ };
+
+ pci_gnt1_pins: pci-gnt1 {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_gnt2_pins: pci-gnt2 {
+ lantiq,groups = "gnt2";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_gnt3_pins: pci-gnt3 {
+ lantiq,groups = "gnt3";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_gnt4_pins: pci-gnt4 {
+ lantiq,groups = "gnt4";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_req1_pins: pci-req1 {
+ lantiq,groups = "req1";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ pci_req2_pins: pci-req2 {
+ lantiq,groups = "req2";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ pci_req3_pins: pci-req3 {
+ lantiq,groups = "req3";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ pci_req4_pins: pci-req4 {
+ lantiq,groups = "req4";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ spi_pins: spi {
+ mux-0 {
+ lantiq,groups = "spi_di";
+ lantiq,function = "spi";
+ };
+ mux-1 {
+ lantiq,groups = "spi_do", "spi_clk";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+
+ spi_cs4_pins: spi-cs4 {
+ mux {
+ lantiq,groups = "spi_cs4";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+
+ stp_pins: stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ };
+
+ stp: stp@e100bb0 {
+ #gpio-cells = <2>;
+ compatible = "lantiq,gpio-stp-xway";
+ gpio-controller;
+ reg = <0xe100bb0 0x40>;
+
+ pinctrl-0 = <&stp_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ asc1: serial@e100c00 {
+ compatible = "lantiq,asc";
+ reg = <0xe100c00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ usb0: usb@e101000 {
+ compatible = "lantiq,arx100-usb";
+ reg = <0xe101000 0x1000
+ 0xe120000 0x3f000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <62 91>;
+ dr_mode = "host";
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@e106000 {
+ compatible = "lantiq,arx100-usb";
+ reg = <0xe106000 0x1000
+ 0xe1e0000 0x3f000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <91>;
+ dr_mode = "host";
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ deu@e103100 {
+ compatible = "lantiq,deu-arx100";
+ reg = <0xe103100 0xf00>;
+ };
+
+ dma0: dma@e104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xe104100 0x800>;
+ };
+
+ ebu0: ebu@e105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xe105300 0x100>;
+ };
+
+ mei@e116000 {
+ compatible = "lantiq,mei-xway";
+ reg = <0xe116000 0x9c>;
+ interrupt-parent = <&icu0>;
+ interrupts = <63>;
+ };
+
+ gsw: etop@e180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xe180000 0x40000
+ 0xe108000 0x200>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 72>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ ppe@e234000 {
+ compatible = "lantiq,ppe-arx100";
+ reg = <0xe234000 0x3ffd>;
+ interrupt-parent = <&icu0>;
+ interrupts = <96>;
+ };
+
+ pci0: pci@e105400 {
+ status = "disabled";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xe105400 0x400>; /* pci bridge */
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+ req-mask = <0x1>;
+ };
+ };
+
+ adsl {
+ compatible = "lantiq,adsl-arx100";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9";
+ model = "AVM FRITZ!Box 7312";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &info_green;
+ led-wifi = &wlan;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ dect {
+ label = "dect";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "fritz7312:green:power";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ voice {
+ label = "fritz7312:green:fon";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+ dect {
+ label = "fritz7312:green:dect";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ };
+ wlan: wlan {
+ label = "fritz7312:green:wlan";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ info_green: info_green {
+ label = "fritz7312:green:info";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ar8030-intr {
+ lantiq,groups = "exin3";
+ lantiq,function = "exin";
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ ar8030-clk {
+ lantiq,groups = "clkout2";
+ lantiq,output = <1>;
+ lantiq,open-drain;
+ };
+ ar8030-rst {
+ lantiq,pins = "io34";
+ lantiq,output = <1>;
+ lantiq,pull = <2>;
+ lantiq,open-drain;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ mtd-mac-address = <&ath9k_cal 0xa91>;
+ mtd-mac-address-increment = <(-2)>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ath9k_cal: partition@0 {
+ label = "urlader";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0xf60000>;
+ };
+
+ partition@f80000 {
+ label = "tffs (1)";
+ reg = <0xf80000 0x40000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "tffs (2)";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
+ <&pci_gnt3_pins>, <&pci_gnt4_pins>,
+ <&pci_req1_pins>, <&pci_req2_pins>,
+ <&pci_req4_pins>;
+ pinctrl-names = "default";
+
+ req-mask = <0xf>;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
+ model = "AVM FRITZ!Box 7320";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &info_green;
+ led-wifi = &wlan;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ dect {
+ label = "dect";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "fritz7320:green:power";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ voice {
+ label = "fritz7320:green:fon";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+ dect {
+ label = "fritz7320:green:dect";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ };
+ wlan: wlan {
+ label = "fritz7320:green:wlan";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ info_green: info_green {
+ label = "fritz7320:green:info";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+ info_red {
+ label = "fritz7320:red:info";
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&ath9k_cal 0xa91>;
+ mtd-mac-address-increment = <(-2)>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ath9k_cal: partition@0 {
+ label = "urlader";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0xf60000>;
+ };
+
+ partition@f80000 {
+ label = "tffs (1)";
+ reg = <0xf80000 0x40000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "tffs (2)";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
+ <&pci_gnt3_pins>, <&pci_gnt4_pins>,
+ <&pci_req1_pins>, <&pci_req2_pins>,
+ <&pci_req3_pins>, <&pci_req4_pins>;
+
+ req-mask = <0xf>;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9";
+ model = "BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_orange;
+ led-failsafe = &power_red;
+ led-running = &power_blue;
+ led-upgrade = &power_blue;
+
+ led-dsl = &broadband_blue;
+ led-wifi = &wireless_blue;
+ };
+
+ memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ restart {
+ label = "restart";
+ gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wireless-red {
+ label = "bthomehubv3a:red:wireless";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ wireless-orange {
+ label = "bthomehubv3a:orange:wireless";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ wireless_blue: wireless-blue {
+ label = "bthomehubv3a:blue:wireless";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ broadband-red {
+ label = "bthomehubv3a:red:broadband";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ broadband-orange {
+ label = "bthomehubv3a:orange:broadband";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ broadband_blue: broadband-blue {
+ label = "bthomehubv3a:blue:broadband";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ power_red: power-red {
+ label = "bthomehubv3a:red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ power_orange: power-orange {
+ label = "bthomehubv3a:orange:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_blue: power-blue {
+ label = "bthomehubv3a:blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "rgmii";
+};
+
+&localbus {
+ flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000 >;
+ req-mask = <0x1>; /* PCI request lines to mask during NAND access */
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "preboot";
+ reg = <0x00000 0x8000>;
+ read-only;
+ };
+ partition@8000 {
+ label = "u-boot";
+ reg = <0x8000 0x05c000>;
+ read-only;
+ };
+ partition@64000 {
+ label = "uboot_env";
+ reg = <0x64000 0x004000>;
+ };
+ ath9k_cal: partition@68000 {
+ label = "art-copy";
+ reg = <0x68000 0x004000>;
+ };
+ partition@6c000 {
+ label = "kernel";
+ reg = <0x6c000 0x200000>;
+ };
+ partition@26c000 {
+ label = "ubi";
+ reg = <0x26c000 0x1d94000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@7000 {
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9";
+ model = "Buffalo WBMR-HP-G300H";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &online_green;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ eject {
+ label = "eject";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_EJECTCD>;
+ };
+ movie {
+ label = "movie";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VIDEO>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ label = "wbmr:green:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power2 {
+ label = "wbmr:red:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ security {
+ label = "wbmr:yellow:security";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "wbmr:green:wireless";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "wbmr:green:dsl";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ online_green: online {
+ label = "wbmr:green:internet";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ online2 {
+ label = "wbmr:red:internet";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ movie {
+ label = "wbmr:blue:movie";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "wbmr:green:usb";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci-in {
+ lantiq,groups = "req1";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+ pci-out {
+ lantiq,groups = "gnt1";
+ lantiq,output = <1>;
+ lantiq,pull = <0>;
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "rgmii";
+ mtd-mac-address = <&boardconfig 0x10024>;
+};
+
+&pci0 {
+ status = "okay";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x60000 0x1f20000>;
+ };
+
+ boardconfig: partition@1fc0000 {
+ label = "board";
+ reg = <0x1fc0000 0x20000>;
+ read-only;
+ };
+
+ partition@1fe0000 {
+ label = "calibration";
+ reg = <0x1fe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+/ {
+ compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9";
+ model = "Lantiq EASY50810";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x400000>;
+ };
+ };
+ };
+};
+
+&stp {
+ status = "okay";
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9_netgear_dgn3500.dtsi"
+
+/ {
+ compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9";
+ model = "Netgear DGN3500";
+};
--- /dev/null
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ bootargs = "root= console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &internet;
+ led-usb = &led_usb;
+ led-wifi = &wifi_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ rtl8366rb {
+ compatible = "realtek,rtl8366rb";
+ gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
+
+ realtek,initvals = <
+ 0x0000 0x0830
+ 0x0400 0x8130
+ 0x000a 0x83ed
+ 0x0f51 0x0017
+ 0x02f5 0x0048
+ 0x02fa 0xffdf
+ 0x02fb 0xffe0
+ 0x0450 0x0000
+ 0x0401 0x0000
+ 0x0431 0x0960
+ >;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ internet: internet {
+ label = "dgn3500:green:internet";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ internet2 {
+ label = "dgn3500:red:internet";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "dgn3500:green:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "dgn3500:green:usb";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power {
+ label = "dgn3500:green:power";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power2 {
+ label = "dgn3500:red:power";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ };
+ wifi_green: wifi {
+ label = "dgn3500:green:wireless";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ wifi2 {
+ label = "dgn3500:amber:wireless";
+ gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "dgn3500:green:wps";
+ gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@168c,0029 {
+ compatible = "pci168c,0029";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x10000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x10000 0x10000>;
+ label = "uboot-env";
+ read-only;
+ };
+
+ ath9k_cal: partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "calibration";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x50000 0xfa0000>;
+ label = "firmware";
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9_netgear_dgn3500.dtsi"
+
+/ {
+ compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9";
+ model = "Netgear DGN3500B";
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9";
+ model = "ZTE H210L";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_green;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &online;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ label = "h201l:green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ online: online {
+ label = "h201l:green:internet";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "h201l:green:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ phone {
+ label = "h201l:green:phone";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "h201l:green:wps";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "h201l:green:wlan";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "h201l:green:usb";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ switch {
+ gpio-export,name = "switch";
+ gpio-export,output = <1>;
+ gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
+ };
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ };
+ wifi {
+ gpio-export,name = "wifi";
+ gpio-export,output = <1>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ };
+};
+
+&gsw {
+ phy-mode = "rgmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "uboot_env";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ reg = <0x30000 0x7d0000>;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "ar9.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9";
+ model = "ZyXEL P-2601HN-Fx";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &online;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ label = "p2601hnfx:green:power";
+ gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power2 {
+ label = "p2601hnfx:red:power";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ };
+ online: online {
+ label = "p2601hnfx:green:internet";
+ gpios = <&stp 13 GPIO_ACTIVE_LOW>;
+ };
+ online2 {
+ label = "p2601hnfx:red:internet";
+ gpios = <&stp 12 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "p2601hnfx:green:dsl";
+ gpios = <&stp 14 GPIO_ACTIVE_LOW>;
+ };
+ phone {
+ label = "p2601hnfx:green:phone";
+ gpios = <&stp 9 GPIO_ACTIVE_LOW>;
+ };
+ phone2 {
+ label = "p2601hnfx:orange:phone";
+ gpios = <&stp 8 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "p2601hnfx:green:wireless";
+ gpios = <&stp 15 GPIO_ACTIVE_LOW>;
+ };
+ wifi2 {
+ label = "p2601hnfx:orange:wireless";
+ gpios = <&stp 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ switch {
+ gpio-export,name = "switch";
+ gpio-export,output = <1>;
+ gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x60000 0xfa0000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+};
+
+&stp {
+ status = "okay";
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,danube";
+
+ aliases {
+ serial0 = &asc1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+
+ regmap = <&rcu0>;
+ offset = <0x10>;
+ mask = <0x40000000>;
+ };
+
+ biu@1f800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803f0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803f0 0x10>;
+ };
+ };
+
+ sram@1f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram", "simple-bus";
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ interrupt-parent = <&icu0>;
+ lantiq,eiu-irqs = <166 135 66>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vmmc: vmmc@107000 {
+ status = "disabled";
+ compatible = "lantiq,vmmc-xway";
+ reg = <0x107000 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <150 151 152 153 154 155>;
+ };
+
+ rcu0: rcu@203000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
+ reg = <0x203000 0x1000>;
+ ranges = <0x0 0x203000 0x100>;
+ big-endian;
+
+ reset: reset-controller@10 {
+ compatible = "lantiq,danube-reset";
+ reg = <0x10 4>, <0x14 4>;
+
+ #reset-cells = <2>;
+ };
+
+ usb_phy: usb2-phy@18 {
+ compatible = "lantiq,danube-usb2-phy";
+ reg = <0x18 4>;
+ status = "disabled";
+
+ resets = <&reset 4 4>;
+ reset-names = "ctrl";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
+
+ localbus: localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+ };
+
+ gptu@e100a00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xe100a00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <126 127 128 129 130 131>;
+ };
+
+ gpios: stp@e100bb0 {
+ #gpio-cells = <2>;
+ compatible = "lantiq,gpio-stp-xway";
+ gpio-controller;
+ reg = <0xe100bb0 0x40>;
+
+ pinctrl-0 = <&stp_pins>;
+ pinctrl-names = "default";
+
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+ status = "disabled";
+ };
+
+ asc0: serial@e100400 {
+ compatible = "lantiq,asc";
+ reg = <0xe100400 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <104 105 106>;
+ status = "disabled";
+ };
+
+ gpio: pinmux@e100b10 {
+ compatible = "lantiq,danube-pinctrl";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe100b10 0xa0>;
+
+ nand_pins: nand {
+ mux-0 {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd";
+ lantiq,function = "ebu";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ mux-1 {
+ lantiq,groups = "nand rdy";
+ lantiq,function = "ebu";
+ lantiq,output = <0>;
+ lantiq,pull = <2>;
+ };
+ };
+
+ nand_cs1_pins: nand-cs1 {
+ mux {
+ lantiq,groups = "nand cs1";
+ lantiq,function = "ebu";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ };
+
+ pci_gnt1_pins: pci-gnt1 {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_gnt2_pins: pci-gnt2 {
+ lantiq,groups = "gnt2";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_req1_pins: pci-req1 {
+ lantiq,groups = "req1";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ pci_req2_pins: pci-req2 {
+ lantiq,groups = "req2";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ stp_pins: stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ };
+
+ asc1: serial@e100c00 {
+ compatible = "lantiq,asc";
+ reg = <0xe100c00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ usb: usb@e101000 {
+ compatible = "lantiq,danube-usb";
+ reg = <0xe101000 0x1000
+ 0xe120000 0x3f000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <62>;
+ dr_mode = "host";
+ phys = <&usb_phy>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ deu@e103100 {
+ compatible = "lantiq,deu-danube";
+ reg = <0xe103100 0xf00>;
+ };
+
+ dma0: dma@e104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xe104100 0x800>;
+ };
+
+ ebu0: ebu@e105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xe105300 0x100>;
+ };
+
+ mei@e116000 {
+ compatible = "lantiq,mei-xway";
+ reg = <0xe116000 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <63>;
+ };
+
+ gsw: etop@e180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xe180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 78>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ ppe@e234000 {
+ compatible = "lantiq,ppe-danube";
+ reg = <0xe234000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <96>;
+ };
+
+ pci0: pci@e105400 {
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xe105400 0x400>; /* pci bridge */
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
+ req-mask = <0x1>; /* GNT1 */
+ };
+ };
+
+ adsl {
+ compatible = "lantiq,adsl-danube";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube";
+ model = "Wippies, Elisa";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power2;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &adsl;
+ led-internet = &internet;
+ led-usb = &led_usb;
+ led-usb2 = &led_usb2;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "power";
+ gpios = <&gpios 21 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ power2: power2 {
+ label = "power2";
+ gpios = <&gpios 20 GPIO_ACTIVE_HIGH>;
+ };
+ lan1 {
+ label = "lan1";
+ gpios = <&gpios 19 GPIO_ACTIVE_HIGH>;
+ };
+ lan2 {
+ label = "lan2";
+ gpios = <&gpios 18 GPIO_ACTIVE_HIGH>;
+ };
+ lan3 {
+ label = "lan3";
+ gpios = <&gpios 17 GPIO_ACTIVE_HIGH>;
+ };
+ lan4 {
+ label = "lan4";
+ gpios = <&gpios 16 GPIO_ACTIVE_HIGH>;
+ };
+ wifi: wifi {
+ label = "wifi";
+ gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
+ };
+ adsl: adsl {
+ label = "adsl";
+ gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
+ };
+ internet: internet {
+ label = "internet";
+ gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
+ };
+ internet2 {
+ label = "internet2";
+ gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
+ };
+ voip {
+ label = "voip";
+ gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
+ };
+ phone {
+ label = "phone";
+ gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
+ };
+ phone2 {
+ label = "phone2";
+ gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb: usb {
+ label = "usb";
+ gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb2: usb2 {
+ label = "usb2";
+ gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
+ };
+ usb3 {
+ label = "usb3";
+ gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
+ };
+ unlabeled {
+ label = "unlabeled";
+ gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu a23";
+ lantiq,function = "ebu";
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ exin {
+ lantiq,groups = "exin1", "exin2";
+ lantiq,function = "exin";
+ lantiq,output = <0>;
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ buttons {
+ lantiq,pins = "io3", "io14";
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ };
+};
+
+&gpios {
+ status = "okay";
+ lantiq,groups = <0x7>;
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ lantiq,noxip;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x60000 0xfa0000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
+ <&pci_req1_pins>, <&pci_req2_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ interrupt-map = <
+ 0x6000 0 0 1 &icu0 135
+ 0x7800 0 0 1 &icu0 66
+ 0x7800 0 0 2 &icu0 66
+ 0x7800 0 0 3 &icu0 66
+ >;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0x7>;
+};
+
+&vmmc {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube_arcadyan_arv4518pwr01.dtsi"
+
+/ {
+ compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube";
+ model = "SMC7908A-ISP";
+};
--- /dev/null
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &online;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ ath5k_eep {
+ compatible = "ath5k,eeprom";
+ ath,eep-flash = <&boardconfig 0x400>;
+ ath,mac-offset = <0x16>;
+ ath,mac-increment = <1>;
+ ath,eep-swap;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "power";
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ online: online {
+ label = "online";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "wifi";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ dsl2 {
+ label = "dsl2";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "usb";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "voice";
+ gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+ };
+ fxs1 {
+ label = "fxs1";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "fxs2";
+ gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+ };
+ fxo {
+ label = "fxo";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ boardconfig: partition@400000 {
+ label = "boardconfig";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x0>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_gnt2_pins>,
+ <&pci_req1_pins>, <&pci_req2_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0xf>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube_arcadyan_arv4518pwr01.dtsi"
+
+/ {
+ compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube";
+ model = "SMC7908A-ISP, Airties WAV-221";
+};
+
+&pci0 {
+ lantiq,external-clock;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
+ model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &internet_green;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ label = "arv4519pw:green:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power2 {
+ label = "arv4519pw:red:power";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv4519pw:green:wlan";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "arv4519pw:green:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ internet_green: online {
+ label = "arv4519pw:green:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ online2 {
+ label = "arv4519pw:red:internet";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "arv4519pw:green:usb";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ voip {
+ label = "arv4519pw:green:voip";
+ gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+ };
+ fxs1 {
+ label = "arv4519pw:green:phone1";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "arv4519pw:green:phone2";
+ gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+ };
+ fxo {
+ label = "arv4519pw:green:line";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ wps2 {
+ label = "arv4519pw:green:wps";
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "arv4519pw:orange:wps";
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+ };
+ wps3 {
+ label = "arv4519pw:red:wps";
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ boardconfig: partition@3f0000 {
+ label = "boardconfig";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x400>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0xf>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube";
+ model = "Easybox 800, WAV-281";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_blue;
+ led-failsafe = &power_red;
+ led-running = &power_blue;
+ led-upgrade = &power_blue;
+
+ led-dsl = &dsl;
+ led-internet = &internet_blue;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "wps";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_blue: power {
+ label = "arv4520pw:blue:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "arv4520pw:blue:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ internet_blue: internet {
+ label = "arv4520pw:blue:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power2 {
+ label = "arv4520pw:red:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "arv4520pw:yellow:wps";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ wps2 {
+ label = "arv4520pw:red:wps";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ /*
+ wps green is missing
+ */
+ fxs1 {
+ label = "arv4520pw:blue:telefon1";
+ gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "arv4520pw:blue:telefon2";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+ };
+ isdn {
+ label = "arv4520pw:blue:isdn";
+ gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+ };
+ fxo {
+ label = "arv4520pw:blue:line";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "arv4520pw:blue:sprache";
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "arv4520pw:blue:usb";
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv4520pw:blue:wifi";
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+ };
+ internet2 {
+ label = "arv4520pw:red:internet";
+ gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+ };
+ /*
+ info is missing
+ */
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ };
+};
+
+&gsw {
+ /* gpiomm 10 - switch */
+ phy-mode = "rmii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "uboot_env";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "firmware";
+ reg = <0x30000 0x3c0000>;
+ };
+
+ boardconfig: partition@7f0000 {
+ label = "boardconfig";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x400>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+ &gpiomm 7 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
+ model = "Speedport W501V Typ A";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ /* we dont have a power led, lets use the online led */
+ led-boot = &online;
+ led-failsafe = &online;
+
+ led-dsl = &dsl;
+ led-internet = &online;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ ath5k_eep {
+ compatible = "ath5k,eeprom";
+ ath,eep-flash = <&boardconfig 0x400>;
+ ath,mac-offset = <0x0>;
+ ath,eep-swap;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ fxo {
+ label = "arv4525pw:green:festnetz";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ fxs {
+ label = "arv4525pw:green:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "arv4525pw:green:t-dsl";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv4525pw:green:wlan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ online: online {
+ label = "arv4525pw:green:online";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ relay {
+ lantiq,pins = "io31";
+ lantiq,output = <1>;
+ };
+ };
+};
+
+/* #define ARV4525PW_PHYRESET 13 */
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ boardconfig: partition@400000 {
+ label = "boardconfig";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+/* #define ARV4525PW_RELAY 31 */
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
+ model = "Arcor 801";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_blue;
+ led-failsafe = &power_red;
+ led-running = &power_blue;
+ led-upgrade = &power_blue;
+
+ led-dsl = &dsl_blue;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ ath5k_eep {
+ compatible = "ath5k,eeprom";
+ ath,eep-flash = <&boardconfig 0x400>;
+ ath,mac-offset = <0x0>;
+ ath,eep-swap;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power_blue: power0 {
+ label = "arv452cqw:blue:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl_blue: dsl {
+ label = "arv452cqw:blue:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ isdn {
+ label = "arv452cqw:blue:isdn";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power1 {
+ label = "arv452cqw:red:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "arv452cqw:blue:wps";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ wps1 {
+ label = "arv452cqw:yellow:wps";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ fxs1 {
+ label = "arv452cqw:blue:telefon1";
+ gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "arv452cqw:blue:telefon2";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+ };
+ wps2 {
+ label = "arv452cqw:red:wps";
+ gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+ };
+ fxo {
+ label = "arv452cqw:blue:line";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "arv452cqw:blue:sprache";
+ gpios = <&gpiomm 4 1>;
+ };
+ led_usb: usb {
+ label = "arv452cqw:blue:usb";
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv452cqw:blue:wlan";
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+ };
+ /*
+ internet blue and internet red are missing
+ dsl2 and dsl3 are not referenced in manual
+ */
+ dsl2 {
+ label = "arv452cqw:yellow:dsl";
+ gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+ };
+ dsl3 {
+ label = "arv452cqw:red:dsl";
+ gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ leds {
+ lantiq,pins = "io3", "io5", "io6", "io7", "io9";
+ lantiq,output = <1>;
+ };
+ };
+};
+
+/*
+#define ARV452CPW_SWITCH_RESET 110
+*/
+&gsw {
+ phy-mode = "rmii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x400000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ boardconfig: partition@3f0000 {
+ label = "boardconfig";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x77f>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+ &gpiomm 7 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
+ model = "Alice/O2 IAD 4421";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power_red;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &internet;
+ led-wifi = &wlan;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ wlan: wlan {
+ label = "arv7506pw11:green:wlan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ power: power {
+ label = "arv7506pw11:green:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "arv7506pw11:green:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ internet: internet {
+ label = "arv7506pw11:green:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power_red {
+ label = "arv7506pw11:red:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ internet_red {
+ label = "arv7506pw11:red:internet";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ info {
+ label = "arv7506pw11:green:info";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ telefon {
+ label = "arv7506pw11:green:telefon";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ info_red {
+ label = "arv7506pw11:red:info";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+/* GPIO 19: switch reset */
+&gsw {
+ phy-mode = "rmii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7a0000>;
+ };
+
+ boardconfig: partition@7f0000 {
+ label = "board_config";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
+ model = "Astoria Networks ARV7510PW22";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &internet;
+ led-usb = &umts;
+ led-wifi = &wlan;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ restart {
+ label = "restart";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ internet: internet {
+ label = "internet";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ wlan: wlan {
+ label = "wlan";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+ umts: 3g {
+ label = "3g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ message {
+ label = "message";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ pins_out {
+ lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
+ lantiq,output = <1>;
+ };
+ pins_in {
+ lantiq,pins = "io11", "io12", "io28";
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gsw {
+ /* Switch reset 19 */
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x60000 0xf80000>;
+ };
+
+ boardconfig: partition@fe0000 {
+ label = "board_config";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 30
+ 0x7800 0 0 1 &icu0 135
+ 0x7800 0 0 2 &icu0 135
+ 0x7800 0 0 3 &icu0 135
+ >;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0x3>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
+ model = "Astoria Networks ARV7518PW";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &online_green;
+ led-usb = &led_usb;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power_green: power {
+ label = "arv7518pw:green:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "arv7518pw:green:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ online_green: online {
+ label = "arv7518pw:green:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv7518pw:green:wlan";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power2 {
+ label = "arv7518pw:red:power";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ online2 {
+ label = "arv7518pw:red:internet";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "arv7518pw:green:usb";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "arv7518pw:green:voip";
+ gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
+ };
+ fxs1 {
+ label = "arv7518pw:green:phone1";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "arv7518pw:green:phone2";
+ gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
+ };
+ unlabeled {
+ label = "arv7518pw:amber:unlabeled";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "arv7518pw:amber:wps";
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+ };
+ wps2 {
+ label = "arv7518pw:green:wps";
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+ };
+ wps3 {
+ label = "arv7518pw:red:wps";
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ leds {
+ lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
+ lantiq,output = <1>;
+ };
+ keys {
+ lantiq,pins = "io28", "io30";
+ lantiq,output = <0>;
+ lantiq,pull = <2>;
+ lantiq,open-drain = <1>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+/*
+#define SWITCH_RESET 13
+*/
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7d0000>;
+ };
+
+ boardconfig: partition@400000 {
+ label = "boardconfig";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x0>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ lantiq,external-clock;
+ req-mask = <0xf>;
+
+ wifi@168c,0029 {
+ compatible = "pci168c,0029";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
+ model = "Astoria Networks ARV7519PW";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power2;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &online;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power2: power2 {
+ label = "power2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ online: online {
+ label = "online";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ online2 {
+ label = "online2";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "wifi";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ wifi2 {
+ label = "wifi2";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+ wifi3 {
+ label = "wifi3";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "voice";
+ gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ wps2 {
+ label = "wps2";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ wps3 {
+ label = "wps3";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ lan {
+ label = "lan";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ tv {
+ label = "tv";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ upgrade {
+ label = "upgrade";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* is there another way to "reserve" the GPIO? */
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ switch {
+ gpio-export,name = "switch";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ switch_rst {
+ lantiq,pins = "io19";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x20000>;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x60000 0xf80000>;
+ };
+
+ boardconfig: partition@fe0000 {
+ label = "board_config";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0xf>;
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+/* warning: passive port only works with active devices */
+&usb {
+ status = "okay";
+};
+
+&vmmc {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
+ model = "Speedport W303V Typ A";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &power_green;
+ led-internet = &online;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power_green: power {
+ label = "arv7525pw:green:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power1 {
+ label = "arv7525pw:red:power";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ online: online {
+ label = "arv7525pw:green:online";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "arv7525pw:green:telefonie";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ voice2 {
+ label = "arv7525pw:red:telefonie";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv7525pw:green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ boardconfig: partition@400000 {
+ label = "board_config";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ };
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
+ model = "Arcor 802";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_red;
+ led-failsafe = &power_blue;
+ led-running = &power_red;
+ led-upgrade = &power_red;
+
+ led-dsl = &internet_red;
+ led-usb = &umts;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ restart {
+ label = "restart";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ dsl {
+ label = "dsl";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power_blue: power1 {
+ label = "arv752dpw:blue:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ internet_red: internet {
+ label = "arv752dpw:red:internet";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ message {
+ label = "arv752dpw:red:message";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power {
+ label = "arv752dpw:red:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ voice1 {
+ label = "arv752dpw:red:voice";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ umts: umts {
+ label = "arv752dpw:red:umts";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv752dpw:red:wifi";
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+ };
+ fxs1 {
+ label = "arv752dpw:green:tae-n";
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "arv752dpw:green:tae-u";
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+ };
+ fxo {
+ label = "arv752dpw:green:isdn";
+ gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
+ };
+ internet2 {
+ label = "arv752dpw:blue:internet";
+ gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+ };
+ voice2 {
+ label = "arv752dpw:blue:voice";
+ gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ leds {
+ lantiq,pins = "io3", "io5", "io6", "io8";
+ lantiq,output = <1>;
+ lantiq,pull = <0>;
+ };
+ keys {
+ lantiq,pins = "io11", "io12", "io13", "io28";
+ lantiq,output = <0>;
+ lantiq,pull = <2>;
+ lantiq,open-drain = <1>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gsw {
+ phy-mode = "rmii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7d0000>;
+ };
+
+ boardconfig: partition@7f0000 {
+ label = "board_config";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x3>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ interrupt-map = <0x7000 0 0 1 &icu0 135>;
+ req-mask = <0x3>;
+
+ wifi@1814,0601 {
+ compatible = "pci1814,0601";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
+ model = "Arcor 803";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_red;
+ led-failsafe = &power_blue;
+ led-running = &power_red;
+ led-upgrade = &power_red;
+
+ led-dsl = &internet_red;
+ led-usb = &umts;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ restart {
+ label = "restart";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ dsl {
+ label = "dsl";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power_blue: power1 {
+ label = "arv752dpw22:blue:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ internet_red: internet {
+ label = "arv752dpw22:red:internet";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ message {
+ label = "arv752dpw22:red:message";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power {
+ label = "arv752dpw22:red:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ voice1 {
+ label = "arv752dpw22:red:voice";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ umts: umts {
+ label = "arv752dpw22:red:umts";
+ gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+ };
+ wifi: wifi {
+ label = "arv752dpw22:red:wifi";
+ gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
+ };
+ fxs1 {
+ label = "arv752dpw22:green:tae-n";
+ gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
+ };
+ fxs2 {
+ label = "arv752dpw22:green:tae-u";
+ gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
+ };
+ fxo {
+ label = "arv752dpw22:green:isdn";
+ gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
+ };
+ internet2 {
+ label = "arv752dpw22:blue:internet";
+ gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
+ };
+ voice2 {
+ label = "arv752dpw22:blue:voice";
+ gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
+ };
+ eth1 {
+ label = "arv752dpw22:green:lan1";
+ gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
+ };
+ eth2 {
+ label = "arv752dpw22:green:lan2";
+ gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
+ };
+ eth3 {
+ label = "arv752dpw22:green:lan3";
+ gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
+ };
+ eth4 {
+ label = "arv752dpw22:green:lan4";
+ gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ebu {
+ lantiq,groups = "ebu cs1";
+ lantiq,function = "ebu";
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <1>;
+ lantiq,output = <1>;
+ };
+ leds {
+ lantiq,pins = "io3", "io5", "io6", "io8";
+ lantiq,open-drain = <1>;
+ lantiq,output = <1>;
+ };
+ buttons {
+ lantiq,pins = "io11", "io12", "io13", "io28";
+ lantiq,pull = <2>;
+ lantiq,output = <0>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x30000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x40000 0x7b0000>;
+ };
+
+ boardconfig: partition@7f0000 {
+ label = "board_config";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <3>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ lantiq,external-clock;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 30
+ 0x7800 0 0 1 &icu0 135
+ 0x7800 0 0 2 &icu0 135
+ 0x7800 0 0 3 &icu0 135
+ >;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0x3>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
+ model = "Speedport W 504V Typ A";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl_green;
+ led-internet = &online_green;
+ led-wifi = &wireless_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wlan {
+ label = "wlan";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ /* key DECT is missing */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power-green {
+ label = "arv8539pw22:green:power";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power-red {
+ label = "arv8539pw22:red:power";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ dsl_green: dsl-green {
+ label = "arv8539pw22:green:dsl";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ online_green: online-green {
+ label = "arv8539pw22:green:online";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_green: wireless-green {
+ label = "arv8539pw22:green:wlan";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ /*
+ telefonie green is missing
+ */
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+ relay {
+ lantiq,pins = "io31";
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "mii";
+ mtd-mac-address = <&art 0x16>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x30000>; /* 192 KiB */
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot";
+ reg = <0x30000 0x10000>; /* 64 KiB */
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7b0000>; /* 7872 KiB */
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>; /* 64 KiB*/
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@168c,0029 {
+ compatible = "pci168c,0029";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ mtd-mac-address = <&art 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+ compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
+ model = "AudioCodes MediaPack MP-252";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "uboot_env";
+ reg = <0x20000 0x20000>;
+ };
+
+ partition@40000 {
+ label = "boardconfig";
+ reg = <0x40000 0x60000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "firmware";
+ reg = <0xa0000 0xf20000>;
+ };
+
+ partition@fc0000 {
+ label = "sysconfig";
+ reg = <0xfc0000 0x40000>;
+ };
+
+ partition@1000000 {
+ label = "rootfs_data";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube";
+ model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_orange;
+ led-failsafe = &power_red;
+ led-running = &power_blue;
+ led-upgrade = &power_blue;
+
+ led-dsl = &broadband_blue;
+ led-wifi = &wireless_blue;
+ };
+
+ memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ findhandset {
+ label = "findhandset";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ upgrading-orange {
+ label = "bthomehubv2b:orange:upgrading";
+ gpios = <&gpios 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ phone-orange {
+ label = "bthomehubv2b:orange:phone";
+ gpios = <&gpios 6 GPIO_ACTIVE_HIGH>;
+ };
+ phone-blue {
+ label = "bthomehubv2b:blue:phone";
+ gpios = <&gpios 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless-orange {
+ label = "bthomehubv2b:orange:wireless";
+ gpios = <&gpios 8 GPIO_ACTIVE_HIGH>;
+ };
+ wireless_blue: wireless-blue {
+ label = "bthomehubv2b:blue:wireless";
+ gpios = <&gpios 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ broadband-red {
+ label = "bthomehubv2b:red:broadband";
+ gpios = <&gpios 10 GPIO_ACTIVE_HIGH>;
+ };
+ broadband-orange {
+ label = "bthomehubv2b:orange:broadband";
+ gpios = <&gpios 11 GPIO_ACTIVE_HIGH>;
+ };
+ broadband_blue: broadband-blue {
+ label = "bthomehubv2b:blue:broadband";
+ gpios = <&gpios 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_red: power-red {
+ label = "bthomehubv2b:red:power";
+ gpios = <&gpios 13 GPIO_ACTIVE_HIGH>;
+ };
+ power_orange: power-orange {
+ label = "bthomehubv2b:orange:power";
+ gpios = <&gpios 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ power_blue: power-blue {
+ label = "bthomehubv2b:blue:power";
+ gpios = <&gpios 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ };
+
+ btn_in {
+ lantiq,pins = "io2", "io15", "io22";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+ };
+};
+
+&gpios {
+ status = "okay";
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 { /* NOR Flash: Spansion S29AL004D 512KB */
+ compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
+ lantiq,cs = <0>;
+ bank-width = <2>;
+ reg = <0 0x0 0x80000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>; /* 256KB */
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x10000>; /* 64KB */
+ };
+
+ partition@50000 {
+ label = "rg_conf_1";
+ reg = <0x50000 0x10000>;
+ };
+
+ partition@60000 {
+ label = "rg_conf_2";
+ reg = <0x60000 0x10000>;
+ };
+
+ partition@70000 {
+ label = "rg_conf_factory";
+ reg = <0x70000 0x10000>;
+ };
+ };
+ };
+
+ flash@1 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000 >;
+ req-mask = <0x1>; /* PCI request lines to mask during NAND access */
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ath9k_cal: partition@0 {
+ label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
+ reg = <0x00000 0x4000>;
+ read-only;
+ };
+
+ partition@4000 {
+ label = "kernel";
+ reg = <0x4000 0x200000>;
+ };
+
+ partition@164000 {
+ label = "ubi";
+ reg = <0x204000 0x1dfc000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@168c,0027 {
+ compatible = "pci168c,0027";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+ compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube";
+ model = "Intel EASY50712 Nand";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ };
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x400000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
+ model = "Gigaset SX761,SX762,SX763";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ switch {
+ gpio-export,name = "switch";
+ gpio-export,output = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&gpios {
+ status = "okay";
+};
+
+&gsw {
+ phy-mode = "rmii";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x30000 0x10000>;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7c0000>;
+ };
+ };
+ };
+
+ gpiomm: gpio@1 {
+ compatible = "lantiq,gpio-mm";
+ reg = <1 0x0 0x10 >;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ lantiq,shadow = <0x3>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,falcon";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips34kc";
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ebu_cs0: localbus@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,localbus", "simple-bus";
+ reg = <0x10000000 0x4000000>;
+ ranges = <0x0 0x10000000 0x4000000>;
+ };
+ ebu_cs1: localbus@14000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,localbus", "simple-bus";
+ reg = <0x14000000 0x4000000>;
+ ranges = <0x0 0x14000000 0x4000000>;
+ };
+
+ ebu@18000000 {
+ compatible = "lantiq,ebu-falcon";
+ reg = <0x18000000 0x100>;
+ };
+
+ sbs2@1d000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sysb2", "simple-bus";
+ reg = <0x1d000000 0x1000000>;
+ ranges = <0x0 0x1d000000 0x1000000>;
+
+ clock_sysgpe: clock-controller@700000 {
+ compatible = "lantiq,sysgpe-falcon";
+ reg = <0x700000 0x100>;
+ #clock-cells = <1>;
+ };
+
+ mps@4000 {
+ compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <154 155>;
+ lantiq,mbx = <&mpsmbx>;
+ };
+
+ gpio0: gpio@810000 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <44>;
+ reg = <0x810000 0x80>;
+ clocks = <&clock_syseth 16>;
+ };
+
+ gpio2: gpio@810100 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <46>;
+ reg = <0x810100 0x80>;
+ clocks = <&clock_syseth 17>;
+ };
+
+ clock_syseth: clock-controller@b00000 {
+ compatible = "lantiq,syseth-falcon";
+ reg = <0xb00000 0x100>;
+ #clock-cells = <1>;
+ };
+
+ pad@b01000 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0xb01000 0x100>;
+ lantiq,bank = <0>;
+ clocks = <&clock_syseth 20>;
+ };
+
+ pad@b02000 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0xb02000 0x100>;
+ lantiq,bank = <2>;
+ clocks = <&clock_syseth 21>;
+ };
+ };
+
+ fpi@1e000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ reg = <0x1e000000 0x1000000>;
+ ranges = <0x0 0x1e000000 0x1000000>;
+
+ serial1: serial@100b00 {
+ status = "disabled";
+ compatible = "lantiq,asc";
+ reg = <0x100b00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ line = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&asc1_pins>;
+ clocks = <&clock_sys1 11>;
+ };
+
+ serial0: serial@100c00 {
+ compatible = "lantiq,asc";
+ reg = <0x100c00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <104 105 106>;
+ line = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&asc0_pins>;
+ clocks = <&clock_sys1 12>;
+ };
+
+ spi: spi@100d00 {
+ status = "disabled";
+ compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc";
+ interrupts = <22 23 24 25>;
+ interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100d00 0x100>;
+ interrupt-parent = <&icu0>;
+ clocks = <&clock_sys1 13>;
+ base_cs = <1>;
+ num_cs = <2>;
+ };
+
+ gptc@100e00 {
+ compatible = "lantiq,gptc-falcon";
+ reg = <0x100e00 0x100>;
+ };
+
+ i2c: i2c@200000 {
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,lantiq-i2c";
+ reg = <0x200000 0x10000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <18 19 20 21>;
+ gpios = <&gpio1 7 0 &gpio1 8 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins>;
+ clocks = <&clock_sys1 14>;
+ };
+
+ gpio1: gpio@800100 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <45>;
+ reg = <0x800100 0x100>;
+ clocks = <&clock_sys1 16>;
+ };
+
+ gpio3: gpio@800200 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <47>;
+ reg = <0x800200 0x100>;
+ clocks = <&clock_sys1 17>;
+ };
+
+ gpio4: gpio@800300 {
+ compatible = "lantiq,falcon-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&icu0>;
+ interrupts = <48>;
+ reg = <0x800300 0x100>;
+ clocks = <&clock_sys1 18>;
+ };
+
+ pad@800400 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0x800400 0x100>;
+ lantiq,bank = <1>;
+ clocks = <&clock_sys1 20>;
+ };
+
+ pad@800500 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0x800500 0x100>;
+ lantiq,bank = <3>;
+ clocks = <&clock_sys1 21>;
+ };
+
+ pad@800600 {
+ compatible = "lantiq,pad-falcon";
+ reg = <0x800600 0x100>;
+ lantiq,bank = <4>;
+ clocks = <&clock_sys1 22>;
+ };
+
+ status@802000 {
+ compatible = "lantiq,status-falcon";
+ reg = <0x802000 0x80>;
+ };
+
+ clock_sys1: clock-controller@f00000 {
+ compatible = "lantiq,sys1-falcon";
+ reg = <0xf00000 0x100>;
+ #clock-cells = <1>;
+ };
+ };
+
+ sbs0@1f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0x1f000000 0x400000>;
+ ranges = <0x0 0x1f000000 0x400000>;
+
+ mpsmbx: mpsmbx@200000 {
+ reg = <0x200000 0x200>;
+ };
+ };
+
+ biu@1f800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x800000>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803f0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803f0 0x10>;
+ };
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinctrl0 {
+ /*ntr {
+ lantiq,groups = "ntr8k";
+ lantiq,function = "ntr";
+ };*/
+ hrst {
+ lantiq,groups = "hrst";
+ lantiq,function = "rst";
+ };
+ };
+
+ asc0_pins: asc0 {
+ asc0 {
+ lantiq,groups = "asc0";
+ lantiq,function = "asc";
+ };
+ };
+ asc1_pins: asc1 {
+ asc1 {
+ lantiq,groups = "asc1";
+ lantiq,function = "asc";
+ };
+ };
+ i2c_pins: i2c_pins {
+ i2c_pins {
+ lantiq,groups = "i2c";
+ lantiq,function = "i2c";
+ };
+ };
+ bootled_pins: bootled {
+ bootled {
+ lantiq,groups = "bootled";
+ lantiq,function = "led";
+ };
+ };
+ ntr_ntr8k: ntr8k {
+ ntr8k {
+ lantiq,groups = "ntr8k";
+ lantiq,function = "ntr";
+ };
+ };
+ ntr_pps: pps {
+ pps {
+ lantiq,groups = "pps";
+ lantiq,function = "ntr";
+ };
+ };
+ ntr_gpio: gpio {
+ gpio {
+ lantiq,pins = "io5";
+ lantiq,mux = <1>;
+ lantiq,output = <0>;
+ };
+ };
+ slic_pins: slic {
+ slic {
+ lantiq,groups = "slic";
+ lantiq,function = "slic";
+ };
+ };
+ };
+
+ pinselect-ntr {
+ compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr";
+ pinctrl-names = "ntr8k", "pps", "gpio";
+ pinctrl-0 = <&ntr_ntr8k>;
+ pinctrl-1 = <&ntr_pps>;
+ pinctrl-2 = <&ntr_gpio>;
+ };
+
+ pinselect-asc1 {
+ compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1";
+ pinctrl-names = "default", "asc1";
+ pinctrl-0 = <&slic_pins>;
+ pinctrl-1 = <&asc1_pins>;
+ };
+
+};
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon FTTDP8 Reference Board";
+ compatible = "lantiq,easy88388", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io34", "io35", "io36", "io37", "io38",
+ "io39", "io40", "io41";
+ lantiq,function = "gpio";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy88388:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ TEST {
+ label = "easy88388:green:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ STATUS {
+ label = "easy88388:green:status";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+ ERROR {
+ label = "easy88388:red:error";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ DSL1 {
+ label = "easy88388:dsl:1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ DSL2 {
+ label = "easy88388:dsl:2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ DSL3 {
+ label = "easy88388:dsl:3";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ DSL4 {
+ label = "easy88388:dsl:4";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+ DSL5 {
+ label = "easy88388:dsl:5";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+ DSL6 {
+ label = "easy88388:dsl:6";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ DSL7 {
+ label = "easy88388:dsl:7";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+ DSL8 {
+ label = "easy88388:dsl:8";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon FTTdp G.FAST Reference Board";
+ compatible = "lantiq,easy88444", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io34", "io35", "io37";
+ lantiq,function = "gpio";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy88444:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+ TEST {
+ label = "easy88444:green:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ STATUS {
+ label = "easy88444:green:status";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ GFAST1 {
+ label = "easy88444:gfast:1";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ GFAST2 {
+ label = "easy88444:gfast:2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ GFAST3 {
+ label = "easy88444:gfast:3";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ GFAST4 {
+ label = "easy88444:gfast:4";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon_lantiq_easy98000.dtsi"
+
+/ {
+ model = "Lantiq Falcon (NAND)";
+ compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon";
+
+ aliases {
+ spi0 = &spi;
+ };
+};
+
+&ebu_cs0 {
+ flash@0 {
+ compatible = "gen_nand", "lantiq,nand-falcon";
+ bank-width = <1>;
+ reg = <0x0 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,mtd-name = "gen_nand";
+ bbt-use-flash;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x80000 0x3d0000>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon_lantiq_easy98000.dtsi"
+
+/ {
+ model = "Lantiq Falcon (NOR)";
+ compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon";
+
+ aliases {
+ spi0 = &spi;
+ };
+};
+
+&ebu_cs0 {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0x0 0x4000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x80000 0x3d0000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon_lantiq_easy98000.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon (SFLASH)";
+ compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ spi1 = &spi;
+ };
+};
+
--- /dev/null
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "lantiq,easy98000", "lantiq,falcon";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bootled_pins>;
+
+ LED_0 {
+ label = "easy98000:green:gpon";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_1 {
+ label = "easy98000:red:gpon";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_2 {
+ label = "easy98000:green:gpon_tx";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_3 {
+ label = "easy98000:green:gpon_rx";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_4 {
+ label = "easy98000:green:voice";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_5 {
+ label = "easy98000:green:status";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
+&ebu_cs1 {
+ eth0: ethernet@3 {
+ compatible = "davicom,dm9000";
+ device_type = "network";
+ reg = <0x0000003 0x1>, <0x0000001 0x1>;
+ reg-names = "addr", "data";
+ interrupt-parent = <&gpio1>;
+ #interrupt-cells = <2>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ cpld@3c00000 {
+ compatible = "lantiq,easy98000_addon";
+ reg = <0x3c00000 0x2>;
+ };
+
+ cpld@3c0000c {
+ compatible = "lantiq,easy98000_cpld_led";
+ reg = <0x3c0000c 0x2>, <0x3c00012 0x2>;
+ };
+};
+
+/* // enable this for second uart:
+&serial1 {
+ status = "okay";
+};*/
+
+&spi {
+ status = "okay";
+
+ eeprom@2 {
+ compatible = "atmel,at25", "atmel,at25160n";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ spi-cpol;
+
+ pagesize = <32>;
+ size = <2048>;
+ address-width = <16>;
+ };
+};
+
+&i2c {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ /* eeprom-emulation by OMU */
+ eeprom@50 {
+ compatible = "at,24c02";
+ reg = <0x50>;
+ };
+ eeprom@51 {
+ compatible = "at,24c02";
+ reg = <0x51>;
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon Reference Board V1.8";
+ compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+ lantiq,function = "gpio";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy98020:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ TEST {
+ label = "easy98020:green:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ ETH {
+ label = "easy98020:green:status";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VOICE {
+ label = "easy98020:green:voice";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VIDEO {
+ label = "easy98020:green:video";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon Reference Board";
+ compatible = "lantiq,easy98020", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ pinctrl {
+ led_pins: phy-led-pins {
+ lantiq,pins = "io42", "io41", "io38", "io37";
+ lantiq,function = "gpio";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bootled_pins>, <&led_pins>;
+
+ GPON {
+ label = "easy98020:green:gpon";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ TEST {
+ label = "easy98020:green:test";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ ETH {
+ label = "easy98020:green:status";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VOICE {
+ label = "easy98020:green:voice";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VIDEO {
+ label = "easy98020:green:video";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ GE0_ACT {
+ label = "easy98020:ge0_act";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+ GE0_LINK {
+ label = "easy98020:ge0_link";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ GE1_ACT {
+ label = "easy98020:ge1_act";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ };
+ GE1_LINK {
+ label = "easy98020:ge1_link";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon HGU Reference Board";
+ compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-mmc {
+ /* Place-holder for SIM-Card connector,
+ to list the used GPIOs, no official binding */
+ compatible = "gpio-mmc";
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>,
+ <&gpio0 3 GPIO_ACTIVE_HIGH>,
+ <&gpio0 2 GPIO_ACTIVE_HIGH>,
+ <0>; /* no CS */
+ gpio-names = "di", "do", "clk", "cs";
+ reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ pinctrl {
+ led_pins: led-pins {
+ lantiq,pins = "io11", "io14", "io36", "io37", "io38";
+ lantiq,function = "gpio";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins &bootled_pins>;
+
+ GPON {
+ label = "easy98021:green:gpon";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ TEST {
+ label = "easy98021:red:test";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ ETH {
+ label = "easy98021:green:status";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ VOICE {
+ label = "easy98021:green:voice";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ SIMCARD {
+ label = "easy98021:green:simcard";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon SFP Stick with SyncE";
+ compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+
+ asc0_func1: func1 {
+ func1_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func1_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <0>;
+ };
+ };
+ asc0_func2: func2 {
+ func2_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <0>;
+ };
+ func2_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ asc0_func3: func3 {
+ func3_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func3_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ };
+
+ pinselect-asc0 {
+ compatible = "lantiq,pinselect-asc0";
+ pinctrl-names = "asc0", "func1", "func2", "func3";
+ pinctrl-0 = <&asc0_pins>;
+ pinctrl-1 = <&asc0_func1>;
+ pinctrl-2 = <&asc0_func2>;
+ pinctrl-3 = <&asc0_func3>;
+ };
+};
+
+&serial0 {
+ pinctrl-names = "default";
+ /* use "empty" pinctrl to leave setting from u-boot enabled */
+ pinctrl-0 = < >;
+};
+
+&i2c {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon SFP Stick with SyncE/1588";
+ compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+
+ asc0_func1: func1 {
+ func1_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func1_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <0>;
+ };
+ };
+ asc0_func2: func2 {
+ func2_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <0>;
+ };
+ func2_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ asc0_func3: func3 {
+ func3_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ func3_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ };
+
+ pinselect-asc0 {
+ compatible = "lantiq,pinselect-asc0";
+ pinctrl-names = "asc0", "func1", "func2", "func3";
+ pinctrl-0 = <&asc0_pins>;
+ pinctrl-1 = <&asc0_func1>;
+ pinctrl-2 = <&asc0_func2>;
+ pinctrl-3 = <&asc0_func3>;
+ };
+};
+
+&serial0 {
+ pinctrl-names = "default";
+ /* use "empty" pinctrl to leave setting from u-boot enabled */
+ pinctrl-0 = < >;
+};
+
+&i2c {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon / Vinax MDU Board";
+ compatible = "lantiq,falcon-mdu", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bootled_pins>;
+
+ LED_0 {
+ label = "mdu:green:gpon";
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_1 {
+ label = "mdu:green:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_2 {
+ label = "mdu:green:2";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_3 {
+ label = "mdu:green:3";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ LED_4 {
+ label = "mdu:green:4";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
--- /dev/null
+/dts-v1/;
+
+#include "falcon.dtsi"
+#include "falcon_sflash-16m.dtsi"
+
+/ {
+ model = "Lantiq Falcon SFP Stick";
+ compatible = "lantiq,falcon-sfp", "lantiq,falcon";
+
+ aliases {
+ spi0 = &ebu_cs0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>; // 64M at 0x0
+ };
+
+ pinctrl {
+ compatible = "lantiq,pinctrl-falcon";
+
+ asc0_func1: func1 {
+ func1_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,output = <0>;
+ };
+ func1_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <0>;
+ };
+ };
+ asc0_func2: func2 {
+ func2_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <0>;
+ };
+ func2_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ asc0_func3: func3 {
+ func3_tx {
+ lantiq,pins = "io32";
+ lantiq,mux = <1>;
+ lantiq,output = <0>;
+ };
+ func3_rx {
+ lantiq,pins = "io33";
+ lantiq,mux = <1>;
+ lantiq,input = <0>;
+ };
+ };
+ };
+
+ pinselect-asc0 {
+ compatible = "lantiq,pinselect-asc0";
+ pinctrl-names = "asc0", "func1", "func2", "func3";
+ pinctrl-0 = <&asc0_pins>;
+ pinctrl-1 = <&asc0_func1>;
+ pinctrl-2 = <&asc0_func2>;
+ pinctrl-3 = <&asc0_func3>;
+ };
+};
+
+&serial0 {
+ pinctrl-names = "default";
+ /* use "empty" pinctrl to leave setting from u-boot enabled */
+ pinctrl-0 = < >;
+};
+
+&i2c {
+ status = "okay";
+};
--- /dev/null
+
+&ebu_cs0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sflash-falcon", "simple-bus";
+
+ flash@0 {
+ compatible = "spansion,s25fl129p0", "spansion,s25fl129p1";
+ reg = <0 0>;
+ linux,mtd-name = "sflash";
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x40000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x80000>;
+ label = "uboot_env";
+ };
+
+ partition@c0000 {
+ reg = <0xc0000 0x740000>;
+ label = "image0";
+ };
+
+ partition@800000 {
+ reg = <0x800000 0x800000>;
+ label = "image1";
+ };
+ };
+ };
+};
--- /dev/null
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,vr9";
+
+ aliases {
+ serial0 = &asc1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips34Kc";
+ reg = <0>;
+ };
+ };
+
+ cputemp {
+ compatible = "lantiq,cputemp";
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+
+ regmap = <&rcu0>;
+ offset = <0x10>;
+ mask = <0xe0000000>;
+ };
+
+ biu@1f800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x28
+ 0x80228 0x28
+ 0x80250 0x28
+ 0x80278 0x28
+ 0x802a0 0x28>;
+ };
+
+ watchdog@803f0 {
+ compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
+ reg = <0x803f0 0x10>;
+
+ regmap = <&rcu0>;
+ };
+ };
+
+ sram@1f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram", "simple-bus";
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ interrupt-parent = <&icu0>;
+ lantiq,eiu-irqs = <166 135 66 40 41 42>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ };
+
+ dcdc@106a00 {
+ compatible = "lantiq,dcdc-xrx200";
+ reg = <0x106a00 0x200>;
+ };
+
+ vmmc: vmmc@107000 {
+ status = "disabled";
+ compatible = "lantiq,vmmc-xway";
+ reg = <0x107000 0x300>;
+ interrupt-parent = <&icu0>;
+ interrupts = <150 151 152 153 154 155>;
+ };
+
+ rcu0: rcu@203000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
+ reg = <0x203000 0x100>;
+ ranges = <0x0 0x203000 0x100>;
+ big-endian;
+
+ gphy0: gphy@20 {
+ compatible = "lantiq,xrx200-gphy";
+ reg = <0x20 0x4>;
+
+ resets = <&reset0 31 30>, <&reset1 7 7>;
+ reset-names = "gphy", "gphy2";
+ };
+
+ gphy1: gphy@68 {
+ compatible = "lantiq,xrx200-gphy";
+ reg = <0x68 0x4>;
+
+ resets = <&reset0 29 28>, <&reset1 6 6>;
+ reset-names = "gphy", "gphy2";
+ };
+
+ reset0: reset-controller@10 {
+ compatible = "lantiq,xrx200-reset";
+ reg = <0x10 4>, <0x14 4>;
+
+ #reset-cells = <2>;
+ };
+
+ reset1: reset-controller@48 {
+ compatible = "lantiq,xrx200-reset";
+ reg = <0x48 4>, <0x24 4>;
+
+ #reset-cells = <2>;
+ };
+
+ usb_phy0: usb2-phy@18 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x18 4>, <0x38 4>;
+ status = "disabled";
+
+ resets = <&reset1 4 4>, <&reset0 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: usb2-phy@34 {
+ compatible = "lantiq,xrx200-usb2-phy";
+ reg = <0x34 4>, <0x3c 4>;
+ status = "disabled";
+
+ resets = <&reset1 5 5>, <&reset0 4 4>;
+ reset-names = "phy", "ctrl";
+ #phy-cells = <0>;
+ };
+ };
+ };
+
+ fpi@10000000 {
+ compatible = "lantiq,xrx200-fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xf000000>;
+ reg = <0x1f400000 0x1000>,
+ <0x10000000 0xf000000>;
+ regmap = <&rcu0>;
+ offset-endianness = <0x4c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ localbus: localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+ };
+
+ gptu@e100a00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xe100a00 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <126 127 128 129 130 131>;
+ };
+
+ usif: usif@da00000 {
+ compatible = "lantiq,usif";
+ reg = <0xda00000 0x1000000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <29 125 107 108 109 110>;
+ status = "disabled";
+ };
+
+ spi: spi@e100800 {
+ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+ reg = <0xe100800 0x100>;
+ interrupt-parent = <&icu0>;
+ interrupts = <22 23 24>;
+ interrupt-names = "spi_rx", "spi_tx", "spi_err",
+ "spi_frm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
+ status = "disabled";
+ };
+
+ gpio: pinmux@e100b10 {
+ compatible = "lantiq,xrx200-pinctrl";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe100b10 0xa0>;
+
+ gphy0_led0_pins: gphy0-led0 {
+ lantiq,groups = "gphy0 led0";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+
+ gphy0_led1_pins: gphy0-led1 {
+ lantiq,groups = "gphy0 led1";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+
+ gphy0_led2_pins: gphy0-led2 {
+ lantiq,groups = "gphy0 led2";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+
+ gphy1_led0_pins: gphy1-led0 {
+ lantiq,groups = "gphy1 led0";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+
+ gphy1_led1_pins: gphy1-led1 {
+ lantiq,groups = "gphy1 led1";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+
+ gphy1_led2_pins: gphy1-led2 {
+ lantiq,groups = "gphy1 led2";
+ lantiq,function = "gphy";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ lantiq,output = <1>;
+ };
+
+ mdio_pins: mdio {
+ mux {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ };
+
+ nand_pins: nand {
+ mux-0 {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd";
+ lantiq,function = "ebu";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ mux-1 {
+ lantiq,groups = "nand rdy";
+ lantiq,function = "ebu";
+ lantiq,output = <0>;
+ lantiq,pull = <2>;
+ };
+ };
+
+ nand_cs1_pins: nand-cs1 {
+ mux {
+ lantiq,groups = "nand cs1";
+ lantiq,function = "ebu";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+ };
+
+ pci_gnt1_pins: pci-gnt1 {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ };
+
+ pci_req1_pins: pci-req1 {
+ lantiq,groups = "req1";
+ lantiq,function = "pci";
+ lantiq,output = <0>;
+ lantiq,open-drain = <1>;
+ lantiq,pull = <2>;
+ };
+
+ spi_pins: spi {
+ mux-0 {
+ lantiq,groups = "spi_di";
+ lantiq,function = "spi";
+ };
+ mux-1 {
+ lantiq,groups = "spi_do", "spi_clk";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+
+ spi_cs4_pins: spi-cs4 {
+ mux {
+ lantiq,groups = "spi_cs4";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+
+ stp_pins: stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ };
+
+ stp: stp@e100bb0 {
+ status = "disabled";
+ compatible = "lantiq,gpio-stp-xway";
+ reg = <0xe100bb0 0x40>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-0 = <&stp_pins>;
+ pinctrl-names = "default";
+
+ lantiq,shadow = <0xffffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x0>;
+ lantiq,phy1 = <0x0>;
+ lantiq,phy2 = <0x0>;
+ };
+
+ asc1: serial@e100c00 {
+ compatible = "lantiq,asc";
+ reg = <0xe100c00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ deu@e103100 {
+ compatible = "lantiq,deu-xrx200";
+ reg = <0xe103100 0xf00>;
+ };
+
+ dma0: dma@e104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xe104100 0x800>;
+ };
+
+ ebu0: ebu@e105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xe105300 0x100>;
+ };
+
+ usb0: usb@e101000 {
+ status = "disabled";
+ compatible = "lantiq,xrx200-usb";
+ reg = <0xe101000 0x1000
+ 0xe120000 0x3f000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <62 91>;
+ dr_mode = "host";
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
+ };
+
+ usb1: usb@e106000 {
+ status = "disabled";
+ compatible = "lantiq,xrx200-usb";
+ reg = <0xe106000 0x1000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <91>;
+ dr_mode = "host";
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
+ };
+
+ eth0: eth@e108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = < 0xe108000 0x3000 /* switch */
+ 0xe10b100 0x70 /* mdio */
+ 0xe10b1d8 0x30 /* mii */
+ 0xe10b308 0x30 /* pmac */
+ >;
+ interrupt-parent = <&icu0>;
+ interrupts = <75 73 72>;
+ resets = <&reset0 21 16>, <&reset0 8 8>;
+ reset-names = "switch", "ppe";
+ lantiq,phys = <&gphy0>, <&gphy1>;
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ mei@e116000 {
+ compatible = "lantiq,mei-xrx200";
+ reg = <0xe116000 0x9c>;
+ interrupt-parent = <&icu0>;
+ interrupts = <63>;
+ };
+
+ ppe@e234000 {
+ compatible = "lantiq,ppe-xrx200";
+ reg = <0xe234000 0x3ffd>;
+ interrupt-parent = <&icu0>;
+ interrupts = <96>;
+ resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>;
+ reset-names = "dsp", "dfe", "tc";
+ };
+
+ pcie0: pcie@d900000 {
+ compatible = "lantiq,pcie-xrx200";
+
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+
+ reg = <0xd900000 0x1000>;
+
+ interrupt-parent = <&icu0>;
+ interrupts = <161 144>;
+
+ device_type = "pci";
+
+ gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
+ };
+
+ pci0: pci@e105400 {
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xe105400 0x400>; /* pci bridge */
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
+ req-mask = <0x1>; /* GNT1 */
+ };
+ };
+
+ vdsl {
+ compatible = "lantiq,vdsl-vrx200";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
+ model = "BT OpenReach VDSL Modem";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ dsl: dsl {
+ label = "asl56026:green:dsl";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ /* power-* is a bicolour led */
+ power_green: power_green {
+ label = "asl56026:green:power";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ power_red: power_red {
+ label = "asl56026:red:power";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ power_led_blink {
+ gpio-export,name = "power_led_blink";
+ gpio-export,output = <0>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x0800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ };
+
+ partition@30000 {
+ label = "uboot_env";
+ reg = <0x30000 0x10000>;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x750000>;
+ };
+
+ partition@790000 {
+ label = "ddrconfig";
+ reg = <0x790000 0x70000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
+ model = "Orange Livebox 2.1";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_green;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &internet_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan_green {
+ label = "arv7519rw22:green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ internet_red {
+ label = "arv7519rw22:red:internet";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power_green {
+ label = "arv7519rw22:green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ alarm_blue {
+ label = "arv7519rw22:blue:alarm";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ internet_orange {
+ label = "arv7519rw22:orange:internet";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ internet_green: internet_green {
+ label = "arv7519rw22:green:internet";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ };
+ voice_green {
+ label = "arv7519rw22:green:voice";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&boardconfig 0x16>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy12>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pcie-rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x60000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "uboot-env";
+ reg = <0x60000 0x20000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "firmware";
+ reg = <0x80000 0x1f00000>;
+ };
+
+ boardconfig: partition@1f80000 {
+ label = "boardconfig";
+ reg = <0x1f80000 0x80000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
+ model = "BT OpenReach VDSL Modem";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_red: power2 {
+ label = "vg3503j:red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ dsl: dsl {
+ label = "vg3503j:green:dsl";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power {
+ label = "vg3503j:green:power";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>,
+ <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
+ <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
+
+ interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ lantiq,switch;
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x20000>;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7d0000>;
+ };
+
+ partition@7f0000 {
+ label = "uboot-env";
+ reg = <0x7f0000 0x10000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_arcadyan_vgv7510kw22.dtsi"
+
+/ {
+ compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+ model = "o2 Box 6431";
+
+ sram@1f000000 {
+ cgu@103000 {
+ lantiq,phy-clk-src = <0x2>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ partitions {
+ partition@0 {
+ label = "Boot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Configuration";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "Certificate";
+ reg = <0x80000 0x20000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "Special_Area";
+ reg = <0xa0000 0x20000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ compatible = "brnboot,root-selector";
+ label = "Primary_Setting";
+ reg = <0xc0000 0x20000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "Code_Image_0";
+ reg = <0xe0000 0x780000>;
+ brnboot,root-id = <0x00>;
+ read-only;
+ };
+
+ partition@860000 {
+ label = "Code_Image_1";
+ reg = <0x860000 0x780000>;
+ brnboot,root-id = <0x01>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_arcadyan_vgv7510kw22.dtsi"
+
+/ {
+ compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+ model = "o2 Box 6431";
+};
+
+&localbus {
+ flash@0 {
+ partitions {
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x60000>; /* 384 KiB */
+ read-only;
+ };
+
+ partition@60000 {
+ label = "uboot-env";
+ reg = <0x60000 0x20000>; /* 128 KiB */
+ read-only;
+ };
+
+ partition@80000 {
+ label = "firmware";
+ reg = <0x80000 0xf60000>; /* 15744 KiB */
+ };
+ };
+ };
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &internet_green;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ dsl: dsl {
+ label = "vgv7510kw22:green:dsl";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_red {
+ label = "vgv7510kw22:red:internet";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ info_red {
+ label = "vgv7510kw22:red:info";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green: power {
+ label = "vgv7510kw22:green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ info_green {
+ label = "vgv7510kw22:green:info";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_green: internet_green {
+ label = "vgv7510kw22:green:internet";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi: wifi {
+ label = "vgv7510kw22:green:wlan";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ power_red: power2 {
+ label = "vgv7510kw22:red:power";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ };
+
+ phone {
+ label = "vgv7510kw22:green:telefon";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>,
+ <&gphy0_led0_pins>, <&gphy0_led1_pins>,
+ <&gphy1_led0_pins>, <&gphy1_led1_pins>;
+ pinctrl-names = "default";
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&boardconfig 0x16>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy12>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boardconfig: partition@fe0000 {
+ label = "board_config";
+ reg = <0xfe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&pcie0 {
+ status = "disabled";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_arcadyan_vgv7519.dtsi"
+
+/ {
+ compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+ model = "KPN Experiabox V8";
+};
+
+&localbus {
+ flash@0 {
+ partitions {
+ partition@0 {
+ label = "Boot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "Certificate";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "Special_Area";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = " Reserve_0";
+ reg = <0x70000 0x10000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "Code_Image_0";
+ reg = <0x80000 0x780000>;
+ brnboot,root-id = <0x00>;
+ read-only;
+ };
+
+ partition@4000000 {
+ compatible = "brnboot,root-selector";
+ label = "Primary_Setting";
+ reg = <0x4000000 0x10000>;
+ read-only;
+ };
+
+ partition@4010000 {
+ label = "Configuration";
+ reg = <0x4010000 0x60000>;
+ read-only;
+ };
+
+ partition@4070000 {
+ label = " Reserve_1";
+ reg = <0x4070000 0x10000>;
+ read-only;
+ };
+
+ partition@4080000 {
+ label = "Code_Image_1";
+ reg = <0x4080000 0x780000>;
+ brnboot,root-id = <0x01>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_arcadyan_vgv7519.dtsi"
+
+/ {
+ compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+ model = "KPN Experiabox V8";
+};
+
+&localbus {
+ flash@0 {
+ partitions {
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "uboot_env";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "firmware";
+ reg = <0x80000 0xf80000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &broadband_green;
+ led-internet = &internet_green;
+ led-wifi = &wireless_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ eco {
+ label = "eco";
+ gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ eco {
+ label = "vgv7519:blue:eco";
+ gpios = <&stp 2 GPIO_ACTIVE_LOW>;
+ };
+ wps_red {
+ label = "vgv7519:red:wps";
+ gpios = <&stp 3 GPIO_ACTIVE_LOW>;
+ };
+ wps_green {
+ label = "vgv7519:green:wps";
+ gpios = <&stp 4 GPIO_ACTIVE_LOW>;
+ };
+ upgrade {
+ label = "vgv7519:blue:upgrade";
+ gpios = <&stp 5 GPIO_ACTIVE_LOW>;
+ };
+ tv {
+ label = "vgv7519:green:tv";
+ gpios = <&stp 6 GPIO_ACTIVE_LOW>;
+ };
+ internet_green: internet_green {
+ label = "vgv7519:green:internet";
+ gpios = <&stp 7 GPIO_ACTIVE_LOW>;
+ };
+ internet_red {
+ label = "vgv7519:red:internet";
+ gpios = <&stp 8 GPIO_ACTIVE_LOW>;
+ };
+ broadband_red {
+ label = "vgv7519:red:broadband";
+ gpios = <&stp 9 GPIO_ACTIVE_LOW>;
+ };
+ broadband_green: broadband_green {
+ label = "vgv7519:green:broadband";
+ gpios = <&stp 10 GPIO_ACTIVE_LOW>;
+ };
+ voice {
+ label = "vgv7519:green:voice";
+ gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+ };
+ wireless_red {
+ label = "vgv7519:red:wireless";
+ gpios = <&stp 12 GPIO_ACTIVE_LOW>;
+ };
+ wireless_green: wireless_green {
+ label = "vgv7519:green:wireless";
+ gpios = <&stp 13 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power2 {
+ label = "vgv7519:green:power";
+ gpios = <&stp 14 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_red: power {
+ label = "vgv7519:red:power";
+ gpios = <&stp 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>;
+ pinctrl-names = "default";
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <0>;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boardconfig: partition@40000 {
+ label = "board_config";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@1814,3091 {
+ compatible = "pci1814,3091";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ mtd-mac-address = <&boardconfig 0x16>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&pcie0 {
+ status = "disabled";
+};
+
+&stp {
+ status = "okay";
+ lantiq,shadow = <0xffff>;
+ lantiq,groups = <0x3>;
+ lantiq,dsl = <0x0>;
+ lantiq,phy1 = <0x0>;
+ lantiq,phy2 = <0x0>;
+ /* lantiq,rising; */
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_avm_fritz3370-rev2.dtsi"
+
+/ {
+ compatible = "avm,fritz3370-rev2-hynix", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 3370 Rev. 2 (Hynix NAND)";
+};
+
+&localbus {
+ flash@1 {
+ compatible = "lantiq,nand-xway";
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-mode = "soft";
+ nand-ecc-strength = <3>;
+ nand-ecc-step-size = <256>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_avm_fritz3370-rev2.dtsi"
+
+/ {
+ compatible = "avm,fritz3370-rev2-micron", "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 3370 Rev. 2 (Micron NAND)";
+};
+
+&localbus {
+ flash@1 {
+ compatible = "lantiq,nand-xway";
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-mode = "on-die";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 3370 Rev. 2";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_red;
+
+ led-dsl = &dsl;
+ led-internet = &info_green;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_POWER>;
+ };
+
+ wifi {
+ label = "wlan";
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WLAN>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ label = "fritz3370:green:power";
+ gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ power_red: power2 {
+ label = "fritz3370:red:power";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ };
+
+ info_red {
+ label = "fritz3370:red:info";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi: wifi {
+ label = "fritz3370:green:wlan";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+
+ dsl: dsl {
+ label = "fritz3370:green:dsl";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "fritz3370:green:lan";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ };
+
+ info_green: info_green {
+ label = "fritz3370:green:info";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb0_vbus: regulator-usb0-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB0_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB1_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+ };
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io37", "io44";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+
+ pcie-rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&pcie0 {
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ urlader: partition@0 {
+ reg = <0x0 0x20000>;
+ label = "urlader";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb0_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb1_vbus>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "vr9_avm_fritz736x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz7360sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 7360 SL";
+};
+
+&power_green {
+ label = "fritz7360sl:green:power";
+};
+
+&power_red {
+ label = "fritz7360sl:red:power";
+};
+
+&info_green {
+ label = "fritz7360sl:green:info";
+};
+
+&wifi {
+ label = "fritz7360sl:green:wlan";
+};
+
+&info_red {
+ label = "fritz7360sl:red:info";
+};
+
+&dect {
+ label = "fritz7360sl:green:dect";
+};
+
+&state_default {
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fixed-partitions";
+
+ urlader: partition@0 {
+ label = "urlader";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0xf60000>;
+ };
+
+ partition@f80000 {
+ label = "tffs (1)";
+ reg = <0xf80000 0x40000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "tffs (2)";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "vr9_avm_fritz736x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz7362sl", "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 7362 SL";
+};
+
+&power_green {
+ label = "fritz7362sl:green:power";
+};
+
+&power_red {
+ label = "fritz7362sl:red:power";
+};
+
+&info_green {
+ label = "fritz7362sl:green:info";
+};
+
+&wifi {
+ label = "fritz7362sl:green:wlan";
+};
+
+&info_red {
+ label = "fritz7362sl:red:info";
+};
+
+&dect {
+ label = "fritz7362sl:green:dect";
+};
+
+&state_default {
+ pcie-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain = <1>;
+ lantiq,output = <1>;
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <4 0>;
+ spi-max-frequency = <1000000>;
+
+ urlader: partition@0 {
+ reg = <0x0 0x40000>;
+ label = "urlader";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x60000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@A0000 {
+ reg = <0xA0000 0x60000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+};
+
+&localbus {
+ flash@1 {
+ compatible = "lantiq,nand-xway";
+ lantiq,cs1 = <1>;
+ bank-width = <1>;
+ reg = <1 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ nand-ecc-mode = "on-die";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ #size-cells = <1>;
+ #address-cells = <2>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_red;
+
+ led-dsl = &info_green;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ dect {
+ label = "dect";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_PHONE>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WLAN>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ power_red: power2 {
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ };
+
+ info_green: info_green {
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi: wifi {
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ info_red: info_red {
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ dect: dect {
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&urlader 0xa91>;
+ mtd-mac-address-increment = <(-2)>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+ };
+
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rmii";
+ phy-handle = <&phy1>;
+ };
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x00>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x01>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io37", "io44";
+ lantiq,pull = <0>;
+ lantiq,open-drain;
+ lantiq,output = <1>;
+ };
+ };
+
+};
+
+&pcie0 {
+ status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ device_type = "pci";
+
+ wifi@168c,002e {
+ compatible = "pci168c,002e";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 7412";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_red;
+
+ led-dsl = &info;
+ led-wifi = &wifi;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ dect {
+ label = "dect";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green: power_green {
+ label = "fritz7412:green:power";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ power_red: power_red {
+ label = "fritz7412:red:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ fon {
+ label = "fritz7412:green:fon";
+ gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+ };
+
+ dect {
+ label = "fritz7412:green:dect";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi: wifi {
+ label = "fritz7412:green:wifi";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ info: info {
+ label = "fritz7412:green:info";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nand-xway";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ lantiq,cs = <1>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "urlader";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "nand-tffs";
+ reg = <0x40000 0x400000>;
+ read-only;
+ };
+
+ partition@440000 {
+ label = "kernel";
+ reg = <0x440000 0x400000>;
+ };
+
+ partition@840000 {
+ label = "ubi";
+ reg = <0x840000 0x3000000>;
+ };
+
+ partition@3840000 {
+ label = "reserved-kernel";
+ reg = <0x3840000 0x400000>;
+ read-only;
+ };
+
+ partition@3c40000 {
+ label = "reserved-filesystem";
+ reg = <0x3c40000 0x3000000>;
+ read-only;
+ };
+
+ partition@6c40000 {
+ label = "config";
+ reg = <0x6c40000 0x400000>;
+ read-only;
+ };
+
+ partition@6e40000 {
+ label = "nand-filesystem";
+ reg = <0x6e40000 0x400000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+
+ wifi@168c,002e {
+ compatible = "pci168c,002e";
+ reg = <0 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pcie-rst {
+ lantiq,pins = "io11";
+ lantiq,open-drain = <1>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+ð0 {
+ lantiq,phys = <&gphy0>;
+
+ interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&vmmc {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9";
+ model = "BT Home Hub 5A";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_blue;
+ led-upgrade = &power_blue;
+
+ led-dsl = &broadband_blue;
+ led-wifi = &wireless_blue;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ restart {
+ label = "restart";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER2>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* broadband-* is a single RGB led */
+ broadband-red {
+ label = "bthomehubv5a:red:broadband";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ broadband-green {
+ label = "bthomehubv5a:green:broadband";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ broadband_blue: broadband-blue {
+ label = "bthomehubv5a:blue:broadband";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ /* wireless-* is a single RGB led */
+ wireless-red {
+ label = "bthomehubv5a:red:wireless";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ wireless-green {
+ label = "bthomehubv5a:green:wireless";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+ wireless_blue: wireless-blue {
+ label = "bthomehubv5a:blue:wireless";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ /* power-* is a single RGB led */
+ power_red: power-red {
+ label = "bthomehubv5a:red:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power-green {
+ label = "bthomehubv5a:green:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ power_blue: power-blue {
+ label = "bthomehubv5a:blue:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ dimmed {
+ label = "dimmed";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain;
+ };
+ pcie_rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ lantiq,open-drain;
+ };
+ usb_vbus {
+ lantiq,pins = "io33";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&localbus {
+ flash@1 {
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <0x1 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ nand-on-flash-bbt;
+ nand-ecc-strength = <3>;
+ nand-ecc-step-size = <256>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0xa0000>;
+ read-only;
+ };
+ partition@a0000 {
+ label = "uboot-env";
+ reg = <0xa0000 0x20000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "unused";
+ reg = <0xc0000 0x40000>;
+ };
+ partition@100000 {
+ label = "ubi";
+ reg = <0x100000 0x7e80000>;
+ };
+ /*
+ * last 512 KiB are for the bad block table, not writable
+ */
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+ wifi@168c,002d {
+ compatible = "pci168c,002d";
+ reg = <0x7000 0 0 0 0>;
+ qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
+ qca,disable-5ghz;
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9";
+ model = "Buffalo WBMR-300HPD";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_g;
+ led-failsafe = &diag_r;
+ led-running = &power_g;
+ led-upgrade = &power_g;
+
+ led-dsl = &dsl;
+ led-internet = &router_g;
+ led-wifi = &wifi_g;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio 48 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ diag_r: diag_r {
+ label = "wbmr300:red:diag";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default_state = "off";
+ };
+
+ wifi_g: wifi_g {
+ label = "wbmr300:green:wifi";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ dsl: dsl {
+ label = "dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_y: router_y {
+ label = "wbmr300:yellow:router";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_y: wifi_y {
+ label = "wbmr300:yellow:wifi";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1: lan1 {
+ label = "wbmr300:green:lan1";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan: wan {
+ label = "wbmr300:green:wan";
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan3: lan3 {
+ label = "wbmr300:green:lan3";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2: lan2 {
+ label = "wbmr300:green:lan2";
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_g: internet_g {
+ label = "wbmr300:green:internet";
+ gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_y: internet_y {
+ label = "wbmr300:yellow:internet";
+ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_g: router_g {
+ label = "wbmr300:green:router";
+ gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_g: power_g {
+ label = "wbmr300:green:power";
+ gpios = <&gpio 49 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy12>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x10000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x10000 0x10000>;
+ label = "gphyfirmware";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x80000>;
+ label = "dsl_fw";
+ };
+
+ partition@de0000 {
+ reg = <0xa0000 0xf40000>;
+ label = "firmware";
+ };
+
+ partition@fe0000 {
+ reg = <0xfe0000 0x10000>;
+ label = "sysconfig";
+ read-only;
+ };
+
+ partition@ff0000 {
+ reg = <0xff0000 0x2000>;
+ label = "ubootconfig";
+ };
+
+ partition@ff3000 {
+ reg = <0xff3000 0x2000>;
+ label = "board_config";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+
+#include "vr9_lantiq_easy80920.dtsi"
+
+/ {
+ compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+ model = "Intel EASY80920 Nand";
+
+ chosen {
+ bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1";
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x100000>; /* 1024 KB */
+ };
+
+ partition@100000 {
+ label = "uboot_env";
+ reg = <0x100000 0x40000>; /* 256 KB */
+ };
+
+ partition@140000 {
+ label = "ubootconfigB";
+ reg = <0x140000 0x40000>; /* 256 KB */
+ };
+
+ partition@180000 {
+ label = "gphyfirmware";
+ reg = <0x180000 0x40000>; /* 256 KB */
+ };
+
+ partition@1c0000 {
+ label = "ubi";
+ reg = <0x1c0000 0xc800000>;
+ };
+
+ partition@c9c0000 {
+ label = "calibration";
+ reg = <0xc9c0000 0x100000>;
+ };
+
+ partition@cac0000 {
+ label = "res";
+ reg = <0xcac0000 0x13540000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_lantiq_easy80920.dtsi"
+
+/ {
+ compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+ model = "Intel EASY80920 Nor";
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>;
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0x7e0000>;
+ };
+ };
+ };
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-usb = &led_usb1;
+ led-usb2 = &led_usb2;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+/* reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };*/
+ paging {
+ label = "paging";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "easy80920:green:power";
+ gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ warning {
+ label = "easy80920:green:warning";
+ gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
+ };
+ fxs1 {
+ label = "easy80920:green:fxs1";
+ gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
+ };
+ fxs2 {
+ label = "easy80920:green:fxs2";
+ gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
+ };
+ fxo {
+ label = "easy80920:green:fxo";
+ gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb1: usb1 {
+ label = "easy80920:green:usb1";
+ gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb2: usb2 {
+ label = "easy80920:green:usb2";
+ gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
+ };
+ sd {
+ label = "easy80920:green:sd";
+ gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
+ };
+ wps {
+ label = "easy80920:green:wps";
+ gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ };
+
+ wan: interface@1 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ lantiq,wan;
+
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin3 {
+ lantiq,groups = "exin3";
+ lantiq,function = "exin";
+ };
+ conf_out {
+ lantiq,pins = "io21",
+ "io33";
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ conf_in {
+ lantiq,pins = "io39"; /* exin3 */
+ lantiq,pull = <2>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <1000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "ENV_MAC";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x10000>;
+ label = "DPF";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x10000>;
+ label = "NVRAM";
+ read-only;
+ };
+
+ partition@500000 {
+ reg = <0x50000 0x003a0000>;
+ label = "kernel";
+ };
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+};
+
+&stp {
+ status = "okay";
+
+ lantiq,shadow = <0xffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x3>;
+ lantiq,phy1 = <0x7>;
+ lantiq,phy2 = <0x7>;
+ /* lantiq,rising; */
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
+ model = "Netgear DM200";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_amber;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ annexa {
+ gpio-export,name = "annexa";
+ gpio-export,output = <0>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+ annexb {
+ gpio-export,name = "annexb";
+ gpio-export,output = <0>;
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_amber: power_amber {
+ label = "dm200:amber:power";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ power_green: power_green {
+ label = "dm200:green:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan_amber {
+ label = "dm200:amber:lan";
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ };
+ lan_green {
+ label = "dm200:green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ dsl_amber {
+ label = "dm200:amber:dsl";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ };
+ dsl_green: dsl_green {
+ label = "dm200:green:dsl";
+ gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+ð0 {
+ lantiq,phys = <&gphy1>;
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_FE>;
+};
+
+&pcie0 {
+ status = "disabled";
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fixed-partitions";
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "uboot";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x10000>;
+ label = "gphyfirmware";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x30000 0x7b0000>;
+ label = "firmware";
+ };
+
+ partition@7e0000 {
+ reg = <0x7e0000 0x10000>;
+ label = "sysconfig";
+ read-only;
+ };
+
+ partition@7f0000 {
+ reg = <0x7f0000 0x2000>;
+ label = "ubootconfig";
+ read-only;
+ };
+
+ partition@7f2000 {
+ reg = <0x7f2000 0x1000>;
+ label = "ART";
+ read-only;
+ };
+
+ partition@7f3000 {
+ reg = <0x7f3000 0x1000>;
+ label = "pot";
+ read-only;
+ };
+
+ partition@7f4000 {
+ reg = <0x7f4000 0xc000>;
+ label = "ret";
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_tplink_tdw89x0.dtsi"
+
+/ {
+ compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+ model = "TP-LINK TD-W8970";
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_tplink_tdw89x0.dtsi"
+
+/ {
+ compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+ model = "TP-LINK TD-W8980";
+
+ gpio-leds {
+ wifi2 {
+ label = "tdw8980:green:wlan5ghz";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio {
+ state_default: pinmux {
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain;
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ /* the power led can't be controlled, use the wps led instead */
+ led-boot = &wps;
+ led-failsafe = &wps;
+
+ led-dsl = &dsl;
+ led-internet = &internet;
+ led-wifi = &wifi;
+ led-usb = &led_usb0;
+ led-usb2 = &led_usb2;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ /*
+ power is not controllable via gpio
+ */
+ dsl: dsl {
+ label = "tdw89x0:green:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+ internet: internet {
+ label = "tdw89x0:green:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_usb0: usb0 {
+ label = "tdw89x0:green:usb";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+ led_usb2: usb2 {
+ label = "tdw89x0:green:usb2";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+ wps: wps {
+ label = "tdw89x0:green:wps";
+ gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ wifi-leds {
+ compatible = "gpio-leds";
+
+ wifi: wifi {
+ label = "tdw89x0:green:wifi";
+ gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
+ pinctrl-names = "default";
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&ath9k_cal 0xf100>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&pcie0 {
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+
+ ath9k: wifi@168c,002e {
+ compatible = "pci168c,002e";
+ reg = <0 0 0 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ qca,no-eeprom;
+ qca,disable-5ghz;
+ mtd-mac-address = <&ath9k_cal 0xf100>;
+ mtd-mac-address-increment = <2>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <33250000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x7a0000>;
+ label = "firmware";
+ };
+
+ partition@7c0000 {
+ reg = <0x7c0000 0x10000>;
+ label = "config";
+ read-only;
+ };
+
+ ath9k_cal: partition@7d0000 {
+ reg = <0x7d0000 0x30000>;
+ label = "boardconfig";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_tplink_vr200.dtsi"
+
+/ {
+ compatible = "tplink,vr200", "lantiq,xway", "lantiq,vr9";
+ model = "TP-LINK Archer VR200";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &internet;
+ led-wifi = &wlan5g;
+
+ led-usb = &led_usb;
+ led-usb2 = &led_usb;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ led {
+ label = "led";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "vr200:blue:power";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "vr200:blue:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ internet: internet {
+ label = "vr200:blue:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "vr200:blue:usb";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+ eth {
+ label = "vr200:blue:lan";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ };
+ wlan {
+ label = "vr200:blue:wlan";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+ wlan5g: wifi {
+ label = "vr200:blue:wlan5g";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ led_wps {
+ label = "vr200:blue:wps";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x7f00000>;
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>;
+ pinctrl-names = "default";
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mtd-mac-address = <&romfile 0xf100>;
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <33250000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0xf90000>;
+ label = "firmware";
+ };
+
+ partition@fb0000 {
+ reg = <0xfb0000 0x10000>;
+ label = "radioDECT";
+ read-only;
+ };
+
+ partition@fc0000 {
+ reg = <0xfc0000 0x10000>;
+ label = "config";
+ read-only;
+ };
+
+ romfile: partition@fd0000 {
+ reg = <0xfd0000 0x10000>;
+ label = "romfile";
+ read-only;
+ };
+
+ partition@fe0000 {
+ reg = <0xfe0000 0x10000>;
+ label = "rom";
+ read-only;
+ };
+
+ partition@ff0000 {
+ reg = <0xff0000 0x10000>;
+ label = "radio";
+ read-only;
+ };
+ };
+ };
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_tplink_vr200.dtsi"
+
+/ {
+ compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
+ model = "TP-LINK Archer VR200v";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+
+ led-dsl = &dsl;
+ led-internet = &internet;
+ led-wifi = &wlan5g;
+
+ led-usb = &led_usb;
+ led-usb2 = &led_usb;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ dect_paging {
+ label = "dect_paging";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power: power {
+ label = "vr200v:blue:power";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ dsl: dsl {
+ label = "vr200v:blue:dsl";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+ internet: internet {
+ label = "vr200v:blue:internet";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ led_usb: usb {
+ label = "vr200v:blue:usb";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+ eth {
+ label = "vr200v:blue:lan";
+ gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ };
+ wlan {
+ label = "vr200v:blue:wlan";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+ wlan5g: wifi {
+ label = "vr200v:blue:wlan5g";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ phone {
+ label = "vr200v:blue:phone";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&vmmc {
+ status = "okay";
+ gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
+ &gpio 31 GPIO_ACTIVE_HIGH //still unknown
+ &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_zyxel_p-2812hnu-fx.dtsi"
+
+/ {
+ compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+ model = "ZyXEL P-2812HNU-F1";
+
+ aliases {
+ led-usb = &led_usb1;
+ led-usb2 = &led_usb2;
+ };
+
+ leds {
+ led_usb1: usb1 {
+ label = "p2812hnuf1:green:usb1";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ };
+ led_usb2: usb2 {
+ label = "p2812hnuf1:green:usb2";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ };
+ partition@40000 {
+ label = "uboot-env";
+ reg = <0x40000 0x20000>;
+ };
+ partition@60000 {
+ label = "kernel";
+ reg = <0x60000 0x300000>;
+ };
+ partition@360000 {
+ label = "ubi";
+ reg = <0x360000 0x7ca0000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ wifi@1814,3062 {
+ compatible = "pci1814,3062";
+ reg = <0x7000 0 0 0 0>;
+ ralink,eeprom = "RT3062.eeprom";
+ };
+};
+
+&pcie0 {
+ status = "disabled";
+};
--- /dev/null
+/dts-v1/;
+
+#include "vr9_zyxel_p-2812hnu-fx.dtsi"
+
+/ {
+ compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+ model = "ZyXEL P-2812HNU-F3";
+};
+
+&pci0 {
+ wifi@1814,3092 {
+ compatible = "pci1814,3092";
+ reg = <0x7000 0 0 0 0>;
+ ralink,eeprom = "RT3092.eeprom";
+ };
+};
+
+&localbus {
+ flash@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x800000>;
+
+ pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x50000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "uboot-env";
+ reg = <0x50000 0x10000>;
+ };
+ partition@60000 {
+ label = "unused";
+ reg = <0x60000 0x7a0000>;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <1 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x200000>;
+ };
+ partition@200000 {
+ label = "ubi";
+ reg = <0x200000 0x7e00000>;
+ };
+ };
+};
--- /dev/null
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+
+ led-dsl = &dsl_green;
+ led-internet = &internet_green;
+ led-wifi = &wireless_green;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ internet_red {
+ label = "p2812hnufx:red:internet";
+ gpios = <&stp 16 GPIO_ACTIVE_LOW>;
+ };
+ internet_green: internet_green {
+ label = "p2812hnufx:green:internet";
+ gpios = <&stp 17 GPIO_ACTIVE_LOW>;
+ };
+ dsl_green: dsl_green {
+ label = "p2812hnufx:green:dsl";
+ gpios = <&stp 18 GPIO_ACTIVE_LOW>;
+ };
+ dsl_orange {
+ label = "p2812hnufx:orange:dsl";
+ gpios = <&stp 19 GPIO_ACTIVE_LOW>;
+ };
+ wireless_orange {
+ label = "p2812hnufx:orange:wlan";
+ gpios = <&stp 20 GPIO_ACTIVE_LOW>;
+ };
+ wireless_green: wireless_green {
+ label = "p2812hnufx:green:wlan";
+ gpios = <&stp 21 GPIO_ACTIVE_LOW>;
+ };
+ power_red: power {
+ label = "p2812hnufx:red:power";
+ gpios = <&stp 22 GPIO_ACTIVE_LOW>;
+ };
+ power_green: power2 {
+ label = "p2812hnufx:green:power";
+ gpios = <&stp 23 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ phone1 {
+ label = "p2812hnufx:green:phone";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ phone1warn {
+ label = "p2812hnufx:orange:phone";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ phone2warn {
+ label = "p2812hnufx:orange:phone2";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+ phone2 {
+ label = "p2812hnufx:green:phone2";
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+ð0 {
+ pinctrl-0 = <&mdio_pins>,
+ <&gphy0_led0_pins>, <&gphy0_led2_pins>,
+ <&gphy1_led1_pins>, <&gphy1_led2_pins>;
+ pinctrl-names = "default";
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ exin3 {
+ lantiq,groups = "exin3";
+ lantiq,function = "exin";
+ };
+ pci_rst {
+ lantiq,pins = "io21";
+ lantiq,output = <1>;
+ lantiq,open-drain = <0>;
+ lantiq,pull = <2>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ ifxhcd-rst {
+ lantiq,pins = "io33";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+
+ pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
+ pinctrl-names = "default";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&stp {
+ status = "okay";
+
+ lantiq,shadow = <0xffffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x0>;
+ lantiq,phy1 = <0x0>;
+ lantiq,phy2 = <0x0>;
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+++ /dev/null
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xway", "lantiq,vr9";
-
- aliases {
- serial0 = &asc1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "mips,mips34Kc";
- reg = <0>;
- };
- };
-
- cputemp {
- compatible = "lantiq,cputemp";
- };
-
- reboot {
- compatible = "syscon-reboot";
-
- regmap = <&rcu0>;
- offset = <0x10>;
- mask = <0xe0000000>;
- };
-
- biu@1f800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,biu", "simple-bus";
- reg = <0x1f800000 0x800000>;
- ranges = <0x0 0x1f800000 0x7fffff>;
-
- icu0: icu@80200 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
- };
-
- watchdog@803f0 {
- compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
- reg = <0x803f0 0x10>;
-
- regmap = <&rcu0>;
- };
- };
-
- sram@1f000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sram", "simple-bus";
- reg = <0x1f000000 0x800000>;
- ranges = <0x0 0x1f000000 0x7fffff>;
-
- eiu0: eiu@101000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,eiu-xway";
- reg = <0x101000 0x1000>;
- interrupt-parent = <&icu0>;
- lantiq,eiu-irqs = <166 135 66 40 41 42>;
- };
-
- pmu0: pmu@102000 {
- compatible = "lantiq,pmu-xway";
- reg = <0x102000 0x1000>;
- };
-
- cgu0: cgu@103000 {
- compatible = "lantiq,cgu-xway";
- reg = <0x103000 0x1000>;
- };
-
- dcdc@106a00 {
- compatible = "lantiq,dcdc-xrx200";
- reg = <0x106a00 0x200>;
- };
-
- vmmc: vmmc@107000 {
- status = "disabled";
- compatible = "lantiq,vmmc-xway";
- reg = <0x107000 0x300>;
- interrupt-parent = <&icu0>;
- interrupts = <150 151 152 153 154 155>;
- };
-
- rcu0: rcu@203000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
- reg = <0x203000 0x100>;
- ranges = <0x0 0x203000 0x100>;
- big-endian;
-
- gphy0: gphy@20 {
- compatible = "lantiq,xrx200-gphy";
- reg = <0x20 0x4>;
-
- resets = <&reset0 31 30>, <&reset1 7 7>;
- reset-names = "gphy", "gphy2";
- };
-
- gphy1: gphy@68 {
- compatible = "lantiq,xrx200-gphy";
- reg = <0x68 0x4>;
-
- resets = <&reset0 29 28>, <&reset1 6 6>;
- reset-names = "gphy", "gphy2";
- };
-
- reset0: reset-controller@10 {
- compatible = "lantiq,xrx200-reset";
- reg = <0x10 4>, <0x14 4>;
-
- #reset-cells = <2>;
- };
-
- reset1: reset-controller@48 {
- compatible = "lantiq,xrx200-reset";
- reg = <0x48 4>, <0x24 4>;
-
- #reset-cells = <2>;
- };
-
- usb_phy0: usb2-phy@18 {
- compatible = "lantiq,xrx200-usb2-phy";
- reg = <0x18 4>, <0x38 4>;
- status = "disabled";
-
- resets = <&reset1 4 4>, <&reset0 4 4>;
- reset-names = "phy", "ctrl";
- #phy-cells = <0>;
- };
-
- usb_phy1: usb2-phy@34 {
- compatible = "lantiq,xrx200-usb2-phy";
- reg = <0x34 4>, <0x3c 4>;
- status = "disabled";
-
- resets = <&reset1 5 5>, <&reset0 4 4>;
- reset-names = "phy", "ctrl";
- #phy-cells = <0>;
- };
- };
- };
-
- fpi@10000000 {
- compatible = "lantiq,xrx200-fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xf000000>;
- reg = <0x1f400000 0x1000>,
- <0x10000000 0xf000000>;
- regmap = <&rcu0>;
- offset-endianness = <0x4c>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- localbus: localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
- };
-
- gptu@e100a00 {
- compatible = "lantiq,gptu-xway";
- reg = <0xe100a00 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <126 127 128 129 130 131>;
- };
-
- usif: usif@da00000 {
- compatible = "lantiq,usif";
- reg = <0xda00000 0x1000000>;
- interrupt-parent = <&icu0>;
- interrupts = <29 125 107 108 109 110>;
- status = "disabled";
- };
-
- spi: spi@e100800 {
- compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
- reg = <0xe100800 0x100>;
- interrupt-parent = <&icu0>;
- interrupts = <22 23 24>;
- interrupt-names = "spi_rx", "spi_tx", "spi_err",
- "spi_frm";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
- status = "disabled";
- };
-
- gpio: pinmux@e100b10 {
- compatible = "lantiq,xrx200-pinctrl";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe100b10 0xa0>;
-
- gphy0_led0_pins: gphy0-led0 {
- lantiq,groups = "gphy0 led0";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
-
- gphy0_led1_pins: gphy0-led1 {
- lantiq,groups = "gphy0 led1";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
-
- gphy0_led2_pins: gphy0-led2 {
- lantiq,groups = "gphy0 led2";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
-
- gphy1_led0_pins: gphy1-led0 {
- lantiq,groups = "gphy1 led0";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
-
- gphy1_led1_pins: gphy1-led1 {
- lantiq,groups = "gphy1 led1";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
-
- gphy1_led2_pins: gphy1-led2 {
- lantiq,groups = "gphy1 led2";
- lantiq,function = "gphy";
- lantiq,open-drain = <0>;
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
-
- mdio_pins: mdio {
- mux {
- lantiq,groups = "mdio";
- lantiq,function = "mdio";
- };
- };
-
- nand_pins: nand {
- mux-0 {
- lantiq,groups = "nand cle", "nand ale",
- "nand rd";
- lantiq,function = "ebu";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- mux-1 {
- lantiq,groups = "nand rdy";
- lantiq,function = "ebu";
- lantiq,output = <0>;
- lantiq,pull = <2>;
- };
- };
-
- nand_cs1_pins: nand-cs1 {
- mux {
- lantiq,groups = "nand cs1";
- lantiq,function = "ebu";
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
- };
-
- pci_gnt1_pins: pci-gnt1 {
- lantiq,groups = "gnt1";
- lantiq,function = "pci";
- lantiq,output = <1>;
- lantiq,open-drain = <0>;
- lantiq,pull = <0>;
- };
-
- pci_req1_pins: pci-req1 {
- lantiq,groups = "req1";
- lantiq,function = "pci";
- lantiq,output = <0>;
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- };
-
- spi_pins: spi {
- mux-0 {
- lantiq,groups = "spi_di";
- lantiq,function = "spi";
- };
- mux-1 {
- lantiq,groups = "spi_do", "spi_clk";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
-
- spi_cs4_pins: spi-cs4 {
- mux {
- lantiq,groups = "spi_cs4";
- lantiq,function = "spi";
- lantiq,output = <1>;
- };
- };
-
- stp_pins: stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- lantiq,pull = <0>;
- lantiq,open-drain = <0>;
- lantiq,output = <1>;
- };
- };
-
- stp: stp@e100bb0 {
- status = "disabled";
- compatible = "lantiq,gpio-stp-xway";
- reg = <0xe100bb0 0x40>;
- #gpio-cells = <2>;
- gpio-controller;
-
- pinctrl-0 = <&stp_pins>;
- pinctrl-names = "default";
-
- lantiq,shadow = <0xffffff>;
- lantiq,groups = <0x7>;
- lantiq,dsl = <0x0>;
- lantiq,phy1 = <0x0>;
- lantiq,phy2 = <0x0>;
- };
-
- asc1: serial@e100c00 {
- compatible = "lantiq,asc";
- reg = <0xe100c00 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <112 113 114>;
- };
-
- deu@e103100 {
- compatible = "lantiq,deu-xrx200";
- reg = <0xe103100 0xf00>;
- };
-
- dma0: dma@e104100 {
- compatible = "lantiq,dma-xway";
- reg = <0xe104100 0x800>;
- };
-
- ebu0: ebu@e105300 {
- compatible = "lantiq,ebu-xway";
- reg = <0xe105300 0x100>;
- };
-
- usb0: usb@e101000 {
- status = "disabled";
- compatible = "lantiq,xrx200-usb";
- reg = <0xe101000 0x1000
- 0xe120000 0x3f000>;
- interrupt-parent = <&icu0>;
- interrupts = <62 91>;
- dr_mode = "host";
- phys = <&usb_phy0>;
- phy-names = "usb2-phy";
- };
-
- usb1: usb@e106000 {
- status = "disabled";
- compatible = "lantiq,xrx200-usb";
- reg = <0xe106000 0x1000>;
- interrupt-parent = <&icu0>;
- interrupts = <91>;
- dr_mode = "host";
- phys = <&usb_phy1>;
- phy-names = "usb2-phy";
- };
-
- eth0: eth@e108000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "lantiq,xrx200-net";
- reg = < 0xe108000 0x3000 /* switch */
- 0xe10b100 0x70 /* mdio */
- 0xe10b1d8 0x30 /* mii */
- 0xe10b308 0x30 /* pmac */
- >;
- interrupt-parent = <&icu0>;
- interrupts = <75 73 72>;
- resets = <&reset0 21 16>, <&reset0 8 8>;
- reset-names = "switch", "ppe";
- lantiq,phys = <&gphy0>, <&gphy1>;
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- mei@e116000 {
- compatible = "lantiq,mei-xrx200";
- reg = <0xe116000 0x9c>;
- interrupt-parent = <&icu0>;
- interrupts = <63>;
- };
-
- ppe@e234000 {
- compatible = "lantiq,ppe-xrx200";
- reg = <0xe234000 0x3ffd>;
- interrupt-parent = <&icu0>;
- interrupts = <96>;
- resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>;
- reset-names = "dsp", "dfe", "tc";
- };
-
- pcie0: pcie@d900000 {
- compatible = "lantiq,pcie-xrx200";
-
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
-
- reg = <0xd900000 0x1000>;
-
- interrupt-parent = <&icu0>;
- interrupts = <161 144>;
-
- device_type = "pci";
-
- gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
- };
-
- pci0: pci@e105400 {
- status = "disabled";
-
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- compatible = "lantiq,pci-xway";
- bus-range = <0x0 0x0>;
- ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
- reg = <0x7000000 0x8000 /* config space */
- 0xe105400 0x400>; /* pci bridge */
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
- req-mask = <0x1>; /* GNT1 */
- };
- };
-
- vdsl {
- compatible = "lantiq,vdsl-vrx200";
- };
-};
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
FILESYSTEMS := squashfs
IMAGE_SIZE :=
+ DTS_DIR := $(DTS_DIR)/lantiq
+ DEVICE_DTS = $$(SOC)_$(1)
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
DEVICE_VENDOR := Allnet
DEVICE_MODEL := ALL0333CJ
IMAGE_SIZE := 3700k
- DEVICE_DTS := ALL0333CJ
+ SOC := amazonse
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
ltq-adsl-app ppp-mod-pppoe
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGN1000B
IMAGE_SIZE := 6000k
- DEVICE_DTS := DGN1000B
+ SOC := amazonse
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
ltq-adsl-app ppp-mod-pppoe
define Device/avm_fritz7312
$(Device/AVM)
DEVICE_MODEL := FRITZ!Box 7312
- DEVICE_DTS := FRITZ7312
+ SOC := ar9
IMAGE_SIZE := 15744k
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
DEVICE_MODEL := FRITZ!Box 7320
DEVICE_ALT0_VENDOR := 1&1
DEVICE_ALT0_MODEL := HomeServer
- DEVICE_DTS := FRITZ7320
+ SOC := ar9
IMAGE_SIZE := 15744k
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
DEVICE_MODEL := Home Hub
DEVICE_VARIANT := Type A
BOARD_NAME := BTHOMEHUBV3A
- DEVICE_DTS := BTHOMEHUBV3A
+ SOC := ar9
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
DEVICE_MODEL := WBMR-HP-G300H
DEVICE_VARIANT := A
IMAGE_SIZE := 31488k
- DEVICE_DTS := WBMR
+ SOC := ar9
+ DEVICE_DTS := ar9_buffalo_wbmr-hp-g300h
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
DEVICE_MODEL := WBMR-HP-G300H
DEVICE_VARIANT := B
IMAGE_SIZE := 31488k
- DEVICE_DTS := WBMR
+ SOC := ar9
+ DEVICE_DTS := ar9_buffalo_wbmr-hp-g300h
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
define Device/netgear_dgn3500
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGN3500
- DEVICE_DTS := DGN3500
+ SOC := ar9
IMAGE_SIZE := 16000k
IMAGES := \
sysupgrade-na.bin sysupgrade.bin \
define Device/netgear_dgn3500b
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGN3500B
- DEVICE_DTS := DGN3500B
+ SOC := ar9
IMAGE_SIZE := 16000k
IMAGES += factory.img
IMAGE/sysupgrade.bin := \
DEVICE_VENDOR := ZTE
DEVICE_MODEL := H201L
IMAGE_SIZE := 7808k
- DEVICE_DTS := H201L
+ SOC := ar9
DEVICE_PACKAGES := kmod-ath9k-htc wpad-basic \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
DEVICE_MODEL := P-2601HN
DEVICE_VARIANT := F1/F3
IMAGE_SIZE := 15616k
- DEVICE_DTS := P2601HNFX
+ SOC := ar9
DEVICE_PACKAGES := kmod-rt2800-usb wpad-basic \
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
DEVICE_ALT0_VENDOR := Wippies
DEVICE_ALT0_MODEL := BeWan iBox v1.0
IMAGE_SIZE := 15616k
- DEVICE_DTS := ARV4510PW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport kmod-usb2-pci kmod-usb-uhci \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_ALT1_VENDOR := Pirelli
DEVICE_ALT1_MODEL := P.RG A4201G
IMAGE_SIZE := 3776k
- DEVICE_DTS := ARV4519PW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Alice/O2
DEVICE_ALT0_MODEL := IAD 4421
IMAGE_SIZE := 7808k
- DEVICE_DTS := ARV7506PW11
+ SOC := danube
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
ltq-adsl-app ppp-mod-pppoa \
DEVICE_ALT0_VENDOR := Astoria Networks
DEVICE_ALT0_MODEL := ARV7510PW22
IMAGE_SIZE := 31232k
- DEVICE_DTS := ARV7510PW22
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Astoria Networks
DEVICE_ALT0_MODEL := ARV7518PW
IMAGE_SIZE := 7872k
- DEVICE_DTS := ARV7518PW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Astoria Networks
DEVICE_ALT0_MODEL := ARV7519PW
IMAGE_SIZE := 15488k
- DEVICE_DTS := ARV7519PW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_ALT0_MODEL := Speedport W303V
DEVICE_ALT0_VARIANT := Typ A
IMAGE_SIZE := 3776k
- DEVICE_DTS := ARV4510PW
+ SOC := danube
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Vodafone
DEVICE_ALT0_MODEL := Easybox 802
IMAGE_SIZE := 7872k
- DEVICE_DTS := ARV752DPW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Vodafone
DEVICE_ALT0_MODEL := Easybox 803
IMAGE_SIZE := 7616k
- DEVICE_DTS := ARV752DPW22
+ SOC := danube
DEVICE_PACKAGES := kmod-usb2-pci kmod-usb-uhci kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Telekom
DEVICE_ALT0_MODEL := Speedport W504V Typ A
IMAGE_SIZE := 7616k
- DEVICE_DTS := ARV8539PW22
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_VENDOR := AudioCodes
DEVICE_MODEL := MediaPack MP-252
IMAGE_SIZE := 14848k
- DEVICE_DTS := ACMP252
+ SOC := danube
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
kmod-ltq-tapi kmod-ltq-vmmc \
DEVICE_MODEL := Home Hub 2
DEVICE_VARIANT := Type B
BOARD_NAME := BTHOMEHUBV2B
- DEVICE_DTS := BTHOMEHUBV2B
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
define Device/lantiq_easy50712
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := Danube (EASY50712)
- DEVICE_DTS := EASY50712
+ SOC := danube
IMAGE_SIZE := 3776k
endef
TARGET_DEVICES += lantiq_easy50712
DEVICE_VENDOR := Siemens
DEVICE_MODEL := Gigaset sx76x
IMAGE_SIZE := 7680k
- DEVICE_DTS := GIGASX76X
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := EASY88388 Falcon FTTDP8 Reference Board
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY88388
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy88388
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := EASY88444 Falcon FTTdp G.FAST Reference Board
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY88444
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy88444
DEVICE_MODEL := Falcon SFU Reference Board (EASY98020)
DEVICE_VARIANT := v1.0-v1.7
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY98020
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy98020
DEVICE_MODEL := Falcon SFU Reference Board (EASY98020)
DEVICE_VARIANT := v1.8
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY98020V18
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy98020-v18
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := Falcon HGU Reference Board (EASY98021)
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY98021
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy98021
DEVICE_MODEL := Falcon SFP Stick (EASY98035SYNCE)
DEVICE_VARIANT := with Synchronous Ethernet
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY98035SYNCE
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy98035synce
DEVICE_MODEL := Falcon SFP Stick (EASY98035SYNCE1588)
DEVICE_VARIANT := with SyncE and IEEE1588
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY98035SYNCE1588
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_easy98035synce1588
DEVICE_MODEL := EASY98000 Falcon Eval Board
DEVICE_VARIANT := NAND
IMAGE_SIZE := 3904k
- DEVICE_DTS := EASY98000NAND
+ SOC := falcon
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
endef
TARGET_DEVICES += lantiq_easy98000-nand
DEVICE_MODEL := EASY98000 Falcon Eval Board
DEVICE_VARIANT := NOR
IMAGE_SIZE := 3904k
- DEVICE_DTS := EASY98000NOR
+ SOC := falcon
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
endef
TARGET_DEVICES += lantiq_easy98000-nor
DEVICE_MODEL := EASY98000 Falcon Eval Board
DEVICE_VARIANT := SFLASH
IMAGE_SIZE := 7424k
- DEVICE_DTS := EASY98000SFLASH
+ SOC := falcon
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
endef
TARGET_DEVICES += lantiq_easy98000-sflash
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := Falcon / VINAXdp MDU Board
IMAGE_SIZE := 7424k
- DEVICE_DTS := FALCON-MDU
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_falcon-mdu
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := Falcon SFP Stick
IMAGE_SIZE := 7424k
- DEVICE_DTS := FALCON-SFP
+ SOC := falcon
endef
TARGET_DEVICES += lantiq_falcon-sfp
define Device/lantiqTpLink
DEVICE_VENDOR := TP-Link
+ SOC := vr9
TPLINK_HWREVADD := 0
TPLINK_HVERSION := 2
KERNEL := kernel-bin | append-dtb | lzma
$(Device/lantiqTpLink)
DEVICE_MODEL := TD-W8970
DEVICE_VARIANT := v1
- DEVICE_DTS := TDW8970
TPLINK_FLASHLAYOUT := 8Mltq
TPLINK_HWID := 0x89700001
TPLINK_HWREV := 1
$(Device/lantiqTpLink)
DEVICE_MODEL := TD-W8980
DEVICE_VARIANT := v1
- DEVICE_DTS := TDW8980
TPLINK_FLASHLAYOUT := 8Mltq
TPLINK_HWID := 0x89800001
TPLINK_HWREV := 14
$(Device/lantiqTpLink)
DEVICE_MODEL := Archer VR200
DEVICE_VARIANT := v1
- DEVICE_DTS := VR200
TPLINK_FLASHLAYOUT := 16Mltq
TPLINK_HWID := 0x63e64801
TPLINK_HWREV := 0x53
$(Device/lantiqTpLink)
DEVICE_MODEL := Archer VR200v
DEVICE_VARIANT := v1
- DEVICE_DTS := VR200v
TPLINK_FLASHLAYOUT := 16Mltq
TPLINK_HWID := 0x73b70801
TPLINK_HWREV := 0x2f
DEVICE_MODEL := ASL56026
DEVICE_ALT0_VENDOR := BT Openreach
DEVICE_ALT0_MODEL := ECI VDSL Modem V-2FUb/I
- DEVICE_DTS := ASL56026
+ SOC := vr9
IMAGE_SIZE := 7488k
endef
TARGET_DEVICES += alphanetworks_asl56026
DEVICE_ALT1_VENDOR := Astoria Networks
DEVICE_ALT1_MODEL := ARV7519RW22
IMAGE_SIZE := 31232k
- DEVICE_DTS := ARV7519RW22
+ SOC := vr9
DEVICE_PACKAGES := kmod-usb-dwc2
SUPPORTED_DEVICES += ARV7519RW22
endef
DEVICE_VENDOR := BT Openreach
DEVICE_MODEL := ECI VDSL Modem V-2FUb/R
IMAGE_SIZE := 8000k
- DEVICE_DTS := VG3503J
+ SOC := vr9
SUPPORTED_DEVICES += VG3503J
endef
TARGET_DEVICES += arcadyan_vg3503j
DEVICE_ALT0_MODEL := Box 6431
DEVICE_ALT0_VARIANT := BRN
IMAGE_SIZE := 7168k
- DEVICE_DTS := VGV7510KW22BRN
+ SOC := vr9
SIGNATURE := BRNDA6431
MAGIC := 0x12345678
CRC32_POLY := 0x04c11db7
DEVICE_ALT0_MODEL := Box 6431
DEVICE_ALT0_VARIANT := NOR
IMAGE_SIZE := 15232k
- DEVICE_DTS := VGV7510KW22NOR
+ SOC := vr9
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VGV7510KW22NOR
endef
DEVICE_ALT0_MODEL := Experiabox 8
DEVICE_ALT0_VARIANT := BRN
IMAGE_SIZE := 7168k
- DEVICE_DTS := VGV7519BRN
+ SOC := vr9
SIGNATURE := 5D00008000
MAGIC := 0x12345678
CRC32_POLY := 0x2083b8ed
DEVICE_ALT0_MODEL := Experiabox 8
DEVICE_ALT0_VARIANT := NOR
IMAGE_SIZE := 15360k
- DEVICE_DTS := VGV7519NOR
+ SOC := vr9
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
SUPPORTED_DEVICES += VGV7519NOR
endef
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 3370
DEVICE_VARIANT := Rev. 2
- DEVICE_DTS := FRITZ3370
+ SOC := vr9
KERNEL_SIZE := 4096k
UBINIZE_OPTS := -E 5
IMAGES += eva-kernel.bin eva-filesystem.bin
$(Device/avm_fritz3370)
DEVICE_MODEL := FRITZ!Box 3370
DEVICE_VARIANT := Rev. 2 (Hynix NAND)
- DEVICE_DTS := FRITZ3370-REV2-HYNIX
endef
TARGET_DEVICES += avm_fritz3370-rev2-hynix
$(Device/avm_fritz3370)
DEVICE_MODEL := FRITZ!Box 3370
DEVICE_VARIANT := Rev. 2 (Micron NAND)
- DEVICE_DTS := FRITZ3370-REV2-MICRON
endef
TARGET_DEVICES += avm_fritz3370-rev2-micron
$(Device/AVM)
DEVICE_MODEL := FRITZ!Box 7360 SL
IMAGE_SIZE := 15744k
- DEVICE_DTS := FRITZ7360SL
+ SOC := vr9
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2
SUPPORTED_DEVICES += FRITZ7360SL
endef
DEVICE_MODEL := FRITZ!Box 7362 SL
KERNEL_SIZE := 4096k
IMAGE_SIZE := 49152k
- DEVICE_DTS := FRITZ7362SL
+ SOC := vr9
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 fritz-tffs
endef
TARGET_DEVICES += avm_fritz7362sl
$(Device/NAND)
DEVICE_MODEL := FRITZ!Box 7412
BOARD_NAME := FRITZ7412
- DEVICE_DTS := FRITZ7412
+ SOC := vr9
KERNEL_SIZE := 4096k
IMAGE_SIZE := 49152k
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic fritz-tffs-nand fritz-caldata
DEVICE_MODEL := Home Hub 5
DEVICE_VARIANT := Type A
BOARD_NAME := BTHOMEHUBV5A
- DEVICE_DTS := BTHOMEHUBV5A
+ SOC := vr9
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
kmod-ath10k-ct ath10k-firmware-qca988x-ct wpad-basic kmod-usb-dwc2
SUPPORTED_DEVICES += BTHOMEHUBV5A
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WBMR-300HPD
IMAGE_SIZE := 15616k
- DEVICE_DTS := WBMR300
+ SOC := vr9
DEVICE_PACKAGES := kmod-mt7603 wpad-basic kmod-usb-dwc2
SUPPORTED_DEVICES += WBMR300
endef
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := VR9 EASY80920
DEVICE_VARIANT := NAND
- DEVICE_DTS := EASY80920NAND
+ SOC := vr9
IMAGE_SIZE := 64512k
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
DEVICE_VENDOR := Lantiq
DEVICE_MODEL := VR9 EASY80920
DEVICE_VARIANT := NOR
- DEVICE_DTS := EASY80920NOR
+ SOC := vr9
IMAGE_SIZE := 7936k
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport
endef
define Device/netgear_dm200
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DM200
- DEVICE_DTS := DM200
+ SOC := vr9
IMAGES := sysupgrade.bin factory.img
IMAGE/sysupgrade.bin := append-kernel | \
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
DEVICE_MODEL := P-2812HNU
DEVICE_VARIANT := F1
BOARD_NAME := P2812HNUF1
- DEVICE_DTS := P2812HNUF1
+ SOC := vr9
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2 kmod-usb-ledtrig-usbport
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += P2812HNUF1
DEVICE_MODEL := P-2812HNU
DEVICE_VARIANT := F3
BOARD_NAME := P2812HNUF3
- DEVICE_DTS := P2812HNUF3
+ SOC := vr9
DEVICE_PACKAGES := kmod-rt2800-pci wpad-basic kmod-usb-dwc2
SUPPORTED_DEVICES += P2812HNUF3
endef
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := ARV4518PWR01
IMAGE_SIZE := 3776k
- DEVICE_DTS := ARV4518PWR01
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := ARV4518PWR01A
IMAGE_SIZE := 3776k
- DEVICE_DTS := ARV4518PWR01A
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
DEVICE_ALT1_VENDOR := Airties
DEVICE_ALT1_MODEL := WAV-281
IMAGE_SIZE := 3648k
- DEVICE_DTS := ARV4520PW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_ALT0_MODEL := Speedport W502V
DEVICE_ALT0_VARIANT := Typ A
IMAGE_SIZE := 3776k
- DEVICE_DTS := ARV4525PW
+ SOC := danube
DEVICE_PACKAGES := kmod-ath5k wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
DEVICE_ALT0_VENDOR := Vodafone
DEVICE_ALT0_MODEL := Easybox 801
IMAGE_SIZE := 3776k
- DEVICE_DTS := ARV452CQW
+ SOC := danube
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
kmod-ath5k wpad-mini \
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
projects / openwrt / staging / dangole.git / commitdiff