Avoid to load FIP by hacking address. Load it by partition table instead.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Change-Id: Ib476d024a51e4b9705441a0007d78f9fdf0ca078
#include <drivers/delay_timer.h>
#include <drivers/dw_ufs.h>
#include <drivers/generic_delay_timer.h>
+#include <drivers/partition/partition.h>
#include <drivers/ufs.h>
#include <lib/mmio.h>
#ifdef SPD_opteed
* This function can be used by the platforms to update/use image
* information for given `image_id`.
******************************************************************************/
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+ return hikey960_set_fip_addr(image_id, "fip");
+}
+
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
return hikey960_bl2_handle_post_image_load(image_id);
#define PL011_UART_CLK_IN_HZ 19200000
#define UFS_BASE 0
-/* FIP partition */
-#define HIKEY960_FIP_BASE (UFS_BASE + 0x1400000)
-#define HIKEY960_FIP_MAX_SIZE (12 << 20)
#define HIKEY960_UFS_DESC_BASE 0x20000000
#define HIKEY960_UFS_DESC_SIZE 0x00200000 /* 2MB */
#include <drivers/io/io_fip.h>
#include <drivers/io/io_memmap.h>
#include <drivers/io/io_storage.h>
+#include <drivers/partition/partition.h>
#include <lib/mmio.h>
#include <lib/semihosting.h>
#include <tools_share/firmware_image_package.h>
size_t ufs_read_lun3_blks(int lba, uintptr_t buf, size_t size);
size_t ufs_write_lun3_blks(int lba, const uintptr_t buf, size_t size);
-static const io_block_spec_t ufs_fip_spec = {
- .offset = HIKEY960_FIP_BASE,
- .length = HIKEY960_FIP_MAX_SIZE,
+static io_block_spec_t ufs_fip_spec;
+
+static const io_block_spec_t ufs_gpt_spec = {
+ .offset = 0,
+ .length = PLAT_PARTITION_BLOCK_SIZE *
+ (PLAT_PARTITION_MAX_ENTRIES / 4 + 2),
};
static const io_block_dev_spec_t ufs_dev_spec = {
check_fip
},
#endif /* TRUSTED_BOARD_BOOT */
+ [GPT_IMAGE_ID] = {
+ &ufs_dev_handle,
+ (uintptr_t)&ufs_gpt_spec,
+ check_ufs
+ },
};
static int check_ufs(const uintptr_t spec)
(void)result;
}
+int hikey960_set_fip_addr(unsigned int image_id, const char *name)
+{
+ const partition_entry_t *entry;
+
+ if (ufs_fip_spec.length == 0) {
+ partition_init(GPT_IMAGE_ID);
+ entry = get_partition_entry(name);
+ if (entry == NULL) {
+ ERROR("Could NOT find the %s partition!\n", name);
+ return -ENOENT;
+ }
+ ufs_fip_spec.offset = entry->start;
+ ufs_fip_spec.length = entry->length;
+ }
+ return 0;
+}
+
/* Return an IO device handle and specification which can be used to access
* an image. Use this to enforce platform load policy
*/
unsigned long coh_limit);
void hikey960_io_setup(void);
int hikey960_read_boardid(unsigned int *id);
+int hikey960_set_fip_addr(unsigned int image_id, const char *name);
void hikey960_clk_init(void);
void hikey960_pmu_init(void);
void hikey960_regulator_enable(void);
PLAT_PL061_MAX_GPIOS := 176
PROGRAMMABLE_RESET_ADDRESS := 1
ENABLE_SVE_FOR_NS := 0
+PLAT_PARTITION_BLOCK_SIZE := 4096
# Process flags
$(eval $(call add_define,HIKEY960_TSP_RAM_LOCATION_ID))
$(eval $(call add_define,CRASH_CONSOLE_BASE))
$(eval $(call add_define,PLAT_PL061_MAX_GPIOS))
+$(eval $(call add_define,PLAT_PARTITION_BLOCK_SIZE))
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
drivers/io/io_block.c \
drivers/io/io_fip.c \
drivers/io/io_storage.c \
+ drivers/partition/gpt.c \
+ drivers/partition/partition.c \
drivers/synopsys/ufs/dw_ufs.c \
drivers/ufs/ufs.c \
lib/cpus/aarch64/cortex_a53.S \