--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,amplifi-router-hd", "qca,qca9563";
+ model = "Ubiquiti AmpliFi Router HD";
+
+ aliases {
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&cal_art_5000>;
+ nvmem-cell-names = "calibration";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x060000>;
+ read-only;
+ };
+
+ partition@60000 {
+ compatible = "u-boot,env";
+ label = "u-boot-env";
+ reg = <0x060000 0x010000>;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xb00000>;
+ };
+
+ partition@b70000 {
+ label = "cfg";
+ reg = <0xb70000 0x0c0000>;
+ read-only;
+ };
+
+ partition@c30000 {
+ label = "recovery";
+ reg = <0xc30000 0x3b0000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "prst";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ /* eeprom */
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ compatible = "mac-base";
+ reg = <0x0 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ cal_art_1000: calibration@1000 {
+ reg = <0x1000 0x440>;
+ };
+
+ cal_art_5000: calibration@5000 {
+ reg = <0x5000 0x844>;
+ };
+ };
+ };
+
+ partition@1000000 {
+ label = "bs1";
+ reg = <0x1000000 0x010000>;
+ };
+
+ partition@1010000 {
+ label = "bs2";
+ reg = <0x1010000 0x010000>;
+ read-only;
+ };
+
+ partition@1020000 {
+ label = "stats";
+ reg = <0x1020000 0x400000>;
+ read-only;
+ };
+
+ partition@1420000 {
+ label = "fw_inactive";
+ reg = <0x1420000 0xb00000>;
+ read-only;
+ };
+
+ partition@1f20000 {
+ label = "reserved";
+ reg = <0x1f20000 0x0e0000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* AR8327_REG_PAD0_MODE */
+ 0x08 0x00000000 /* PORT5 PAD MODE CTRL */
+ 0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x602613a0 /* AR8327_REG_POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* AR8327_REG_LED_CTRL0 */
+ 0x54 0xca35ca35 /* AR8327_REG_LED_CTRL1 */
+ 0x58 0xc935c935 /* AR8327_REG_LED_CTRL2 */
+ 0x5c 0x03ffff00 /* AR8327_REG_LED_CTRL3 */
+ 0x7c 0x0000007e /* AR8327_REG_PORT_STATUS(0) */
+ 0x94 0x00001080 /* AR8327_REG_PORT_STATUS(6) */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ nvmem-cells = <&macaddr_art_0 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_art_0 (-2)>, <&cal_art_1000>;
+ nvmem-cell-names = "mac-address", "calibration";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};