Commit
adc69fe (""uboot-at91: changed som1 ek default defconfigs")
changed the booting media to sdmmc1 as default booting w/o any reason.
The Microchip releases for the rest of supported distributions (Buildroot,
Yocto Project) uses sdmmc0 as default booting media for this board.
Thus change it back to sdmmc0. With this remove references to sdmmc1
config. The initial commit cannot be cleanly reverted.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
(cherry picked from commit
9a49788008c18fd4fe6fefe9697962c102fb14c6)
BUILD_DEVICES:=microchip_sama5d3-xplained
endef
-define U-Boot/sama5d27_som1_ek_mmc1
- NAME:=SAMA5D27 SOM1 Ek (SDCard1)
+define U-Boot/sama5d27_som1_ek_mmc
+ NAME:=SAMA5D27 SOM1 Ek (SDCard0)
BUILD_SUBTARGET:=sama5
BUILD_DEVICES:=microchip_sama5d27-som1-ek
endef
sama5d4_xplained_mmc \
sama5d4_xplained_spiflash \
sama5d4_xplained_nandflash\
- sama5d27_som1_ek_mmc1 \
+ sama5d27_som1_ek_mmc \
sama5d27_som1_ek_qspiflash \
sama5d27_wlsom1_ek_mmc \
sama5d27_wlsom1_ek_qspiflash \
$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb \
::$(DEVICE_NAME)-fit.itb
- $(if $(findstring sama5d27-som1-ek,$@), \
- mcopy -i $@.boot \
- $(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc1/u-boot.bin \
- ::u-boot.bin
- mcopy -i $@.boot \
- $(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd1_uboot/at91bootstrap.bin \
- ::BOOT.bin,
- mcopy -i $@.boot \
- $(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc/u-boot.bin \
- ::u-boot.bin
+ mcopy -i $@.boot \
+ $(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc/u-boot.bin \
+ ::u-boot.bin
+
$(if $(findstring sama5d4-xplained,$@), \
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd_uboot_secure/at91bootstrap.bin \
::BOOT.bin,
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd_uboot/at91bootstrap.bin \
- ::BOOT.bin))
+ ::BOOT.bin)
$(CP) uboot-env.txt $@-uboot-env.txt
sed -i '2d;3d' $@-uboot-env.txt
bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
bootcmd=run setloadaddr; run setbootargs; run fatload_mmc; bootm ${loadaddr}
bootdelay=1
-fatload_mmc=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = atmel,sama5d27-som1-ek || test ${board_name} = microchip,sama7g5ek; then fatload mmc 1:1 ${loadaddr} ${board}-fit.itb; else fatload mmc 0:1 ${loadaddr} ${board}-fit.itb; fi
-setbootargs=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = atmel,sama5d27-som1-ek || test ${board_name} = microchip,sama7g5ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
+fatload_mmc=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then fatload mmc 1:1 ${loadaddr} ${board}-fit.itb; else fatload mmc 0:1 ${loadaddr} ${board}-fit.itb; fi
+setbootargs=if test ${board_name} = atmel,sama5d2-xplained || test ${board_name} = microchip,sama7g5ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
setloadaddr=if test ${board_name} = microchip,sama7g5ek; then setenv loadaddr 0x63000000; else setenv loadaddr 0x21000000; fi
ethact=gmac0
stderr=serial