u32 pdr2;
};
+/* GPIO Registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
+
+
/* Bit definitions for RCSR register in CCM */
#define CCM_RCSR_NF16B (1 << 31)
#define CCM_RCSR_NFMS (1 << 30)
/*
* GPIO
*/
-#define GPIO1_BASE 0x53FCC000
-#define GPIO2_BASE 0x53FD0000
-#define GPIO3_BASE 0x53FA4000
+#define GPIO1_BASE_ADDR 0x53FCC000
+#define GPIO2_BASE_ADDR 0x53FD0000
+#define GPIO3_BASE_ADDR 0x53FA4000
#define GPIO_DR 0x00000000 /* data register */
#define GPIO_GDIR 0x00000004 /* direction register */
#define GPIO_PSR 0x00000008 /* pad status register */
#define imx_get_uartclk mx31_get_ipg_clk
extern void mx31_gpio_mux(unsigned long mode);
-enum mx31_gpio_direction {
- MX31_GPIO_DIRECTION_IN,
- MX31_GPIO_DIRECTION_OUT,
-};
-
-#ifdef CONFIG_MX31_GPIO
-extern int mx31_gpio_direction(unsigned int gpio,
- enum mx31_gpio_direction direction);
-extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
-extern int mx31_gpio_get(unsigned int gpio);
-#else
-static inline int mx31_gpio_direction(unsigned int gpio,
- enum mx31_gpio_direction direction)
-{
- return 1;
-}
-static inline int mx31_gpio_get(unsigned int gpio)
-{
- return 1;
-}
-static inline void mx31_gpio_set(unsigned int gpio, unsigned int value)
-{
-}
-#endif
-
void mx31_uart1_hw_init(void);
void mx31_spi2_hw_init(void);
u32 cswcr2;
};
+/* GPIO Registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MXC_MX51_H__ */
#include <asm/arch/mx31-regs.h>
#include <nand.h>
#include <fsl_pmic.h>
+#include <mxc_gpio.h>
#include "qong_fpga.h"
DECLARE_GLOBAL_DATA_PTR;
static void qong_fpga_reset(void)
{
- mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
+ mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
udelay(30);
- mx31_gpio_set(QONG_FPGA_RST_PIN, 1);
+ mxc_gpio_set(QONG_FPGA_RST_PIN, 1);
udelay(300);
}
/* FPGA reset Pin */
/* rstn = 0 */
- mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
- mx31_gpio_direction(QONG_FPGA_RST_PIN, MX31_GPIO_DIRECTION_OUT);
+ mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
+ mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT);
/* set interrupt pin as input */
- mx31_gpio_direction(QONG_FPGA_IRQ_PIN, MX31_GPIO_DIRECTION_IN);
+ mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN);
#endif
qong_fpga_reset();
/* Enable NAND flash */
- mx31_gpio_set(15, 1);
- mx31_gpio_set(14, 1);
- mx31_gpio_direction(15, MX31_GPIO_DIRECTION_OUT);
- mx31_gpio_direction(16, MX31_GPIO_DIRECTION_IN);
- mx31_gpio_direction(14, MX31_GPIO_DIRECTION_IN);
- mx31_gpio_set(15, 0);
+ mxc_gpio_set(15, 1);
+ mxc_gpio_set(14, 1);
+ mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN);
+ mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN);
+ mxc_gpio_set(15, 0);
}
int qong_nand_rdy(void *chip)
{
udelay(1);
- return mx31_gpio_get(16);
+ return mxc_gpio_get(16);
}
void qong_nand_select_chip(struct mtd_info *mtd, int chip)
{
if (chip >= 0)
- mx31_gpio_set(15, 0);
+ mxc_gpio_set(15, 0);
else
- mx31_gpio_set(15, 1);
+ mxc_gpio_set(15, 1);
}
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
-COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o
+COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
+++ /dev/null
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-/* GPIO port description */
-static unsigned long gpio_ports[] = {
- [0] = GPIO1_BASE,
- [1] = GPIO2_BASE,
- [2] = GPIO3_BASE,
-};
-
-int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction)
-{
- unsigned int port = gpio >> 5;
- u32 l;
-
- if (port >= ARRAY_SIZE(gpio_ports))
- return 1;
-
- gpio &= 0x1f;
-
- l = __REG(gpio_ports[port] + GPIO_GDIR);
- switch (direction) {
- case MX31_GPIO_DIRECTION_OUT:
- l |= 1 << gpio;
- break;
- case MX31_GPIO_DIRECTION_IN:
- l &= ~(1 << gpio);
- }
- __REG(gpio_ports[port] + GPIO_GDIR) = l;
-
- return 0;
-}
-
-void mx31_gpio_set(unsigned int gpio, unsigned int value)
-{
- unsigned int port = gpio >> 5;
- u32 l;
-
- if (port >= ARRAY_SIZE(gpio_ports))
- return;
-
- gpio &= 0x1f;
-
- l = __REG(gpio_ports[port] + GPIO_DR);
- if (value)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- __REG(gpio_ports[port] + GPIO_DR) = l;
-}
-
-int mx31_gpio_get(unsigned int gpio)
-{
- unsigned int port = gpio >> 5;
- u32 l;
-
- if (port >= ARRAY_SIZE(gpio_ports))
- return -1;
-
- gpio &= 0x1f;
-
- l = (__REG(gpio_ports[port] + GPIO_DR) >> gpio) & 0x01;
-
- return l;
-}
--- /dev/null
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#ifdef CONFIG_MX31
+#include <asm/arch/mx31-regs.h>
+#endif
+#ifdef CONFIG_MX51
+#include <asm/arch/imx-regs.h>
+#endif
+#include <asm/io.h>
+#include <mxc_gpio.h>
+
+/* GPIO port description */
+static unsigned long gpio_ports[] = {
+ [0] = GPIO1_BASE_ADDR,
+ [1] = GPIO2_BASE_ADDR,
+ [2] = GPIO3_BASE_ADDR,
+#ifdef CONFIG_MX51
+ [3] = GPIO4_BASE_ADDR,
+#endif
+};
+
+int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction)
+{
+ unsigned int port = gpio >> 5;
+ struct gpio_regs *regs;
+ u32 l;
+
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return 1;
+
+ gpio &= 0x1f;
+
+ regs = (struct gpio_regs *)gpio_ports[port];
+
+ l = readl(®s->gpio_dir);
+
+ switch (direction) {
+ case MXC_GPIO_DIRECTION_OUT:
+ l |= 1 << gpio;
+ break;
+ case MXC_GPIO_DIRECTION_IN:
+ l &= ~(1 << gpio);
+ }
+ writel(l, ®s->gpio_dir);
+
+ return 0;
+}
+
+void mxc_gpio_set(unsigned int gpio, unsigned int value)
+{
+ unsigned int port = gpio >> 5;
+ struct gpio_regs *regs;
+ u32 l;
+
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return;
+
+ gpio &= 0x1f;
+
+ regs = (struct gpio_regs *)gpio_ports[port];
+
+ l = readl(®s->gpio_dr);
+ if (value)
+ l |= 1 << gpio;
+ else
+ l &= ~(1 << gpio);
+ writel(l, ®s->gpio_dr);
+}
+
+int mxc_gpio_get(unsigned int gpio)
+{
+ unsigned int port = gpio >> 5;
+ struct gpio_regs *regs;
+ u32 l;
+
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return -1;
+
+ gpio &= 0x1f;
+
+ regs = (struct gpio_regs *)gpio_ports[port];
+
+ l = (readl(®s->gpio_dr) >> gpio) & 0x01;
+
+ return l;
+}
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
+#include <mxc_gpio.h>
#ifdef CONFIG_MX27
/* i.MX27 has a completely wrong register layout and register definitions in the
0x53f84000,
};
-#define OUT MX31_GPIO_DIRECTION_OUT
-#define mxc_gpio_direction mx31_gpio_direction
-#define mxc_gpio_set mx31_gpio_set
#elif defined(CONFIG_MX51)
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
CSPI2_BASE_ADDR,
CSPI3_BASE_ADDR,
};
-#define mxc_gpio_direction(gpio, dir) (0)
-#define mxc_gpio_set(gpio, value) {}
-#define OUT 1
#else
#error "Unsupported architecture"
#endif
+#define OUT MXC_GPIO_DIRECTION_OUT
+
struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
u32 cfg_reg;
#endif
int gpio;
+ int ss_pol;
};
static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+ mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
}
void spi_cs_deactivate(struct spi_slave *slave)
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
mxc_gpio_set(mxcs->gpio,
- !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+ !(mxcs->ss_pol));
}
#ifdef CONFIG_MX51
mxcs->slave.bus = bus;
mxcs->slave.cs = cs;
mxcs->base = spi_bases[bus];
+ mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
#ifdef CONFIG_MX51
/* Can be used for i.MX31 too ? */
#ifdef CONFIG_IMX31_PHYCORE_EET
#define BOARD_LATE_INIT
-#define CONFIG_MX31_GPIO 1
+#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
-#define CONFIG_MX31_GPIO
+#define CONFIG_MXC_GPIO
#define CONFIG_MXC_SPI
#define CONFIG_DEFAULT_SPI_BUS 1
--- /dev/null
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MXC_GPIO_H
+#define __MXC_GPIO_H
+
+enum mxc_gpio_direction {
+ MXC_GPIO_DIRECTION_IN,
+ MXC_GPIO_DIRECTION_OUT,
+};
+
+#ifdef CONFIG_MXC_GPIO
+extern int mxc_gpio_direction(unsigned int gpio,
+ enum mxc_gpio_direction direction);
+extern void mxc_gpio_set(unsigned int gpio, unsigned int value);
+extern int mxc_gpio_get(unsigned int gpio);
+#else
+static inline int mxc_gpio_direction(unsigned int gpio,
+ enum mxc_gpio_direction direction)
+{
+ return 1;
+}
+static inline int mxc_gpio_get(unsigned int gpio)
+{
+ return 1;
+}
+static inline void mxc_gpio_set(unsigned int gpio, unsigned int value)
+{
+}
+#endif
+
+#endif
projects / project / bcm63xx / u-boot.git / commitdiff