lantiq: ARV7519RW22: several fixes

- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40519

diff --git a/target/linux/lantiq/dts/ARV7519RW.dtsi b/target/linux/lantiq/dts/ARV7519RW.dtsi
index 77904705f0a9d2c96c1fa11c720610d341ed942b..eff337e2a6da8b9e7bc24f4eb161cc0a556d94ea 100644 (file)
--- a/target/linux/lantiq/dts/ARV7519RW.dtsi
+++ b/target/linux/lantiq/dts/ARV7519RW.dtsi
@@ -1,23 +1,54 @@
 /include/ "vr9.dtsi"
 
 / {
-
        model = "ARV7519 - Astoria Networks ARV7519RW22-A-LT";
-       
+
        chosen {
                bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
        };
-       
+
        memory@0 {
                reg = <0x0 0x8000000>;
        };
-       
+
        fpi@10000000 {
-               
+               localbus@0 {
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x0 0x60000>;
+                                       read-only;
+                               };
+
+                               partition@60000 {
+                                       label = "uboot_cfg";
+                                       reg = <0x60000 0x20000>;
+                                       read-only;
+                               };
+
+                               partition@80000 {
+                                       label = "firmware";
+                                       reg = <0x80000 0x1f00000>;
+                               };
+
+                               partition@1f80000 {
+                                       label = "boardconfig";
+                                       reg = <0x1f80000 0x80000>;
+                                       read-only;
+                               };
+                       };
+               };
+
                gpio: pinmux@E100B10 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&state_default>;
-                       
+
                        state_default: pinmux {
                                mdio {
                                        lantiq,groups = "mdio";
@@ -63,20 +94,32 @@
                                reg = <0>;
                                mac-address = [ 00 11 22 33 44 55 ];
 
+                               ethernet@1 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <4>;
+                                       phy-mode = "mii";
+                                       phy-handle = <&phy13>;
+                               };
                                ethernet@2 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <5>;
+                                       phy-mode = "mii";
+                                       phy-handle = <&phy14>;
+                               };
+                               ethernet@3 {
                                        compatible = "lantiq,xrx200-pdi-port";
                                        reg = <2>;
-                                       phy-mode = "gmii";
+                                       phy-mode = "mii";
                                        phy-handle = <&phy11>;
                                };
-                               ethernet@3 {
+                               ethernet@4 {
                                        compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
+                                       reg = <3>;
+                                       phy-mode = "mii";
+                                       phy-handle = <&phy12>;
                                };
                        };
-                       
+
                        wan: interface@1 {
                                compatible = "lantiq,xrx200-pdi";
                                #address-cells = <1>;
@@ -84,7 +127,7 @@
                                reg = <1>;
                                mac-address = [ 00 11 22 33 44 56 ];
                                lantiq,wan;
-                               ethernet@4 {
+                               ethernet@0 {
                                        compatible = "lantiq,xrx200-pdi-port";
                                        reg = <0>;
                                        phy-mode = "rgmii";
@@ -102,11 +145,19 @@
                                };
                                phy11: ethernet-phy@11 {
                                        reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy12: ethernet-phy@12 {
+                                       reg = <0x12>;
+                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                                };
                                phy13: ethernet-phy@13 {
                                        reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy14: ethernet-phy@14 {
+                                       reg = <0x14>;
+                                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
                                };
                        };
                };
@@ -116,7 +167,7 @@
                        gpios = <&gpio 32 0>;
                        lantiq,portmask = <0x3>;
                };
-       
+
                pcie@d900000 {
                        status = "disabled";
                        compatible = "lantiq,pcie-xway";
@@ -133,54 +184,55 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 20 1>;
+                       linux,code = <0x211>;
+               };
                reset {
                        label = "reset";
                        gpios = <&gpio 22 1>;
                        linux,code = <0x198>;
                };
-
                rfkill {
                        label = "rfkill";
                        gpios = <&gpio 45 1>;
                        linux,code = <0xf7>;
                };
-               wps {
-                       gpios = <&gpio 20 1>;
-                       linux,code = <0x211>;
-               };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               lan{                                            /* green */
+               lan_green {
                        label = "lan";
-                       gpios = <&gpio 02 1>;
+                       gpios = <&gpio 2 1>;
                };
-               voice {                                         /* green */
-                       label = "voice";
-                       gpios = <&gpio 29 1>;
-               };
-               message1 {                                      /* red */
-                       label = "message1";
+               message_red {
+                       label = "message_red";
                        gpios = <&gpio 10 1>;
                };
-               message2 {                                      /* green */
-                       label = "message2";
-                       gpios = <&gpio 19 1>;
+               power_red {
+                       label = "power";
+                       gpios = <&gpio 14 1>;
+                       default-state = "on";
                };
-               message3 {                                      /* orange */
-                       label = "message3";
-                       gpios = <&gpio 28 1>;
-               };              
-               alarm {                                         /* blue */
+               alarm_blue {
                        label = "alarm";
                        gpios = <&gpio 15 1>;
                };
-               power {                                         /* red */
-                       label = "power";
-                       gpios = <&gpio 14 1>;
-                       default-state = "on";
+               message_orange {
+                       label = "message_orange";
+                       gpios = <&gpio 19 1>;
+               };
+               message_green {
+                       label = "message_green";
+                       gpios = <&gpio 28 1>;
+               };
+               voice_green {
+                       label = "voice";
+                       gpios = <&gpio 29 1>;
                };
        };
 };

diff --git a/target/linux/lantiq/dts/ARV7519RWV11.dts b/target/linux/lantiq/dts/ARV7519RWV11.dts
index c77ffb416d6788e3954d31d010944ae8e92a05a9..7dadf144f9e378924a9efcd2138b2e48e4e39027 100644 (file)
--- a/target/linux/lantiq/dts/ARV7519RWV11.dts
+++ b/target/linux/lantiq/dts/ARV7519RWV11.dts
@@ -1,50 +1,11 @@
 /dts-v1/;
 
-
 /include/ "ARV7519RW.dtsi"
 
 / {
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       label = "uboot";
-                                       reg = <0x000000000000 0x00060000>;
-                                       read-only;
-                               };
-
-                               partition@60000 {
-                                       label = "uboot_cfg";
-                                       reg = <0x000000060000 0x00020000>;
-                                       read-only;
-                               };
-                               
-                               partition@80000 {
-                                       label = "firmware";
-                                       reg = <0x000000080000 0x01f00000>;
-                               };
-                               
-                               partition@1f80000 {
-                                       label = "boardconfig";
-                                       reg = <0x000001f80000 0x00080000>;
-                                       read-only;
-
-                               };      
-                                                       
-
-                               
-                       };
-               };
-       };
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
-               firmware = "lantiq/vr9_phy11g_a1x.bin";  /*VR9 1.1*/
+               firmware = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
                phys = [ 00 01 ];
        };
 };

diff --git a/target/linux/lantiq/dts/ARV7519RWV12.dts b/target/linux/lantiq/dts/ARV7519RWV12.dts
index 6f1bf51e1b375ccfeccf58b9ddc8950b5fde1562..0dd7972d18fe1f79cb9a410eda48b916b8a764ab 100644 (file)
--- a/target/linux/lantiq/dts/ARV7519RWV12.dts
+++ b/target/linux/lantiq/dts/ARV7519RWV12.dts
@@ -1,50 +1,11 @@
 /dts-v1/;
 
-
 /include/ "ARV7519RW.dtsi"
 
 / {
-       fpi@10000000 {
-               localbus@0 {
-                       nor-boot@0 {
-                               compatible = "lantiq,nor";
-                               bank-width = <2>;
-                               reg = <0 0x0 0x2000000>, <1 0x2000000 0x2000000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       label = "uboot";
-                                       reg = <0x000000000000 0x00060000>;
-                                       read-only;
-                               };
-
-                               partition@60000 {
-                                       label = "uboot_cfg";
-                                       reg = <0x000000060000 0x00020000>;
-                                       read-only;
-                               };
-                               
-                               partition@80000 {
-                                       label = "firmware";
-                                       reg = <0x000000080000 0x01f00000>;
-                               };
-                               
-                               partition@1f80000 {
-                                       label = "boardconfig";
-                                       reg = <0x000001f80000 0x00080000>;
-                                       read-only;
-
-                               };              
-                                                       
-
-                               
-                       };
-               };
-       };
        gphy-xrx200 {
                compatible = "lantiq,phy-xrx200";
-               firmware = "lantiq/vr9_phy11g_a2x.bin";  /*VR9 1.2*/
+               firmware = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
                phys = [ 00 01 ];
        };
 };

diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk b/target/linux/lantiq/xrx200/profiles/arv.mk
index a32ec64ac0e3c6ab8e6b211268dd620e88bcdab5..776bf49a0a151b144e48671f1735a7df7bc5ddc6 100644 (file)
--- a/target/linux/lantiq/xrx200/profiles/arv.mk
+++ b/target/linux/lantiq/xrx200/profiles/arv.mk
@@ -37,9 +37,8 @@ endef
 $(eval $(call Profile,VGV7519BRN))
 
 define Profile/ARV7519RWV11
-  NAME:=Livebox Astoria V1
-  PACKAGES:=kmod-ath9k wpad-mini \
-       kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+  NAME:=Livebox Astoria ARV7519 v1.1
+  PACKAGES:=kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
        kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
        kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
        ltq-vdsl-app ppp-mod-pppoa
@@ -48,9 +47,8 @@ endef
 $(eval $(call Profile,ARV7519RWV11))
 
 define Profile/ARV7519RWV12
-  NAME:=Livebox Astoria V2
-  PACKAGES:=kmod-ath9k wpad-mini \
-       kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+  NAME:=Livebox Astoria ARV7519 v1.2
+  PACKAGES:=kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
        kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
        kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
        ltq-vdsl-app ppp-mod-pppoa