ath9k: correct signal quality report

This adjusts ath9k's signal quality reporting taking into
consideration received beacons at an RSSI of 45 should indicate
you can use of MCS 15 rate (144 Mbps) reliably on dual stream card.
Keep in mind mac80211 does not yet have aggregation fixed but this
should still provide more accurate results.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 7555c34133845e8fa15c7acbe145722c88e57b1a..32acaf7ff622de69836a1dd5f94a1309a108099c 100644 (file)
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -279,8 +279,15 @@ static void ath9k_rx_prepare(struct ath_softc *sc,
        rx_status->rate_idx = ath_rate2idx(sc, (status->rateKbps / 100));
        rx_status->antenna = status->antenna;
 
-       /* XXX Fix me, 64 cannot be the max rssi value, rigure it out */
-       rx_status->qual = status->rssi * 100 / 64;
+       /* at 45 you will be able to use MCS 15 reliably. A more elaborate
+        * scheme can be used here but it requires tables of SNR/throughput for
+        * each possible mode used. */
+       rx_status->qual = status->rssi * 100 / 45;
+
+       /* rssi can be more than 45 though, anything above that
+        * should be considered at 100% */
+       if (rx_status->qual > 100)
+               rx_status->qual = 100;
 
        if (status->flags & ATH_RX_MIC_ERROR)
                rx_status->flag |= RX_FLAG_MMIC_ERROR;