return pages_done;
}
-/*
- * get_user_pages_remote() - pin user pages in memory
- * @tsk: the task_struct to use for page fault accounting, or
- * NULL if faults are not to be recorded.
- * @mm: mm_struct of target mm
- * @start: starting user address
- * @nr_pages: number of pages from start to pin
- * @gup_flags: flags modifying lookup behaviour
- * @pages: array that receives pointers to the pages pinned.
- * Should be at least nr_pages long. Or NULL, if caller
- * only intends to ensure the pages are faulted in.
- * @vmas: array of pointers to vmas corresponding to each page.
- * Or NULL if the caller does not require them.
- * @locked: pointer to lock flag indicating whether lock is held and
- * subsequently whether VM_FAULT_RETRY functionality can be
- * utilised. Lock must initially be held.
- *
- * Returns either number of pages pinned (which may be less than the
- * number requested), or an error. Details about the return value:
- *
- * -- If nr_pages is 0, returns 0.
- * -- If nr_pages is >0, but no pages were pinned, returns -errno.
- * -- If nr_pages is >0, and some pages were pinned, returns the number of
- * pages pinned. Again, this may be less than nr_pages.
- *
- * The caller is responsible for releasing returned @pages, via put_page().
- *
- * @vmas are valid only as long as mmap_sem is held.
- *
- * Must be called with mmap_sem held for read or write.
- *
- * get_user_pages walks a process's page tables and takes a reference to
- * each struct page that each user address corresponds to at a given
- * instant. That is, it takes the page that would be accessed if a user
- * thread accesses the given user virtual address at that instant.
- *
- * This does not guarantee that the page exists in the user mappings when
- * get_user_pages returns, and there may even be a completely different
- * page there in some cases (eg. if mmapped pagecache has been invalidated
- * and subsequently re faulted). However it does guarantee that the page
- * won't be freed completely. And mostly callers simply care that the page
- * contains data that was valid *at some point in time*. Typically, an IO
- * or similar operation cannot guarantee anything stronger anyway because
- * locks can't be held over the syscall boundary.
- *
- * If gup_flags & FOLL_WRITE == 0, the page must not be written to. If the page
- * is written to, set_page_dirty (or set_page_dirty_lock, as appropriate) must
- * be called after the page is finished with, and before put_page is called.
- *
- * get_user_pages is typically used for fewer-copy IO operations, to get a
- * handle on the memory by some means other than accesses via the user virtual
- * addresses. The pages may be submitted for DMA to devices or accessed via
- * their kernel linear mapping (via the kmap APIs). Care should be taken to
- * use the correct cache flushing APIs.
- *
- * See also get_user_pages_fast, for performance critical applications.
- *
- * get_user_pages should be phased out in favor of
- * get_user_pages_locked|unlocked or get_user_pages_fast. Nothing
- * should use get_user_pages because it cannot pass
- * FAULT_FLAG_ALLOW_RETRY to handle_mm_fault.
- */
-long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
- unsigned long start, unsigned long nr_pages,
- unsigned int gup_flags, struct page **pages,
- struct vm_area_struct **vmas, int *locked)
-{
- /*
- * FIXME: Current FOLL_LONGTERM behavior is incompatible with
- * FAULT_FLAG_ALLOW_RETRY because of the FS DAX check requirement on
- * vmas. As there are no users of this flag in this call we simply
- * disallow this option for now.
- */
- if (WARN_ON_ONCE(gup_flags & FOLL_LONGTERM))
- return -EINVAL;
-
- return __get_user_pages_locked(tsk, mm, start, nr_pages, pages, vmas,
- locked,
- gup_flags | FOLL_TOUCH | FOLL_REMOTE);
-}
-EXPORT_SYMBOL(get_user_pages_remote);
-
/**
* populate_vma_page_range() - populate a range of pages in the vma.
* @vma: target vma
}
#endif /* CONFIG_FS_DAX || CONFIG_CMA */
+/*
+ * get_user_pages_remote() - pin user pages in memory
+ * @tsk: the task_struct to use for page fault accounting, or
+ * NULL if faults are not to be recorded.
+ * @mm: mm_struct of target mm
+ * @start: starting user address
+ * @nr_pages: number of pages from start to pin
+ * @gup_flags: flags modifying lookup behaviour
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long. Or NULL, if caller
+ * only intends to ensure the pages are faulted in.
+ * @vmas: array of pointers to vmas corresponding to each page.
+ * Or NULL if the caller does not require them.
+ * @locked: pointer to lock flag indicating whether lock is held and
+ * subsequently whether VM_FAULT_RETRY functionality can be
+ * utilised. Lock must initially be held.
+ *
+ * Returns either number of pages pinned (which may be less than the
+ * number requested), or an error. Details about the return value:
+ *
+ * -- If nr_pages is 0, returns 0.
+ * -- If nr_pages is >0, but no pages were pinned, returns -errno.
+ * -- If nr_pages is >0, and some pages were pinned, returns the number of
+ * pages pinned. Again, this may be less than nr_pages.
+ *
+ * The caller is responsible for releasing returned @pages, via put_page().
+ *
+ * @vmas are valid only as long as mmap_sem is held.
+ *
+ * Must be called with mmap_sem held for read or write.
+ *
+ * get_user_pages walks a process's page tables and takes a reference to
+ * each struct page that each user address corresponds to at a given
+ * instant. That is, it takes the page that would be accessed if a user
+ * thread accesses the given user virtual address at that instant.
+ *
+ * This does not guarantee that the page exists in the user mappings when
+ * get_user_pages returns, and there may even be a completely different
+ * page there in some cases (eg. if mmapped pagecache has been invalidated
+ * and subsequently re faulted). However it does guarantee that the page
+ * won't be freed completely. And mostly callers simply care that the page
+ * contains data that was valid *at some point in time*. Typically, an IO
+ * or similar operation cannot guarantee anything stronger anyway because
+ * locks can't be held over the syscall boundary.
+ *
+ * If gup_flags & FOLL_WRITE == 0, the page must not be written to. If the page
+ * is written to, set_page_dirty (or set_page_dirty_lock, as appropriate) must
+ * be called after the page is finished with, and before put_page is called.
+ *
+ * get_user_pages is typically used for fewer-copy IO operations, to get a
+ * handle on the memory by some means other than accesses via the user virtual
+ * addresses. The pages may be submitted for DMA to devices or accessed via
+ * their kernel linear mapping (via the kmap APIs). Care should be taken to
+ * use the correct cache flushing APIs.
+ *
+ * See also get_user_pages_fast, for performance critical applications.
+ *
+ * get_user_pages should be phased out in favor of
+ * get_user_pages_locked|unlocked or get_user_pages_fast. Nothing
+ * should use get_user_pages because it cannot pass
+ * FAULT_FLAG_ALLOW_RETRY to handle_mm_fault.
+ */
+long get_user_pages_remote(struct task_struct *tsk, struct mm_struct *mm,
+ unsigned long start, unsigned long nr_pages,
+ unsigned int gup_flags, struct page **pages,
+ struct vm_area_struct **vmas, int *locked)
+{
+ /*
+ * Parts of FOLL_LONGTERM behavior are incompatible with
+ * FAULT_FLAG_ALLOW_RETRY because of the FS DAX check requirement on
+ * vmas. However, this only comes up if locked is set, and there are
+ * callers that do request FOLL_LONGTERM, but do not set locked. So,
+ * allow what we can.
+ */
+ if (gup_flags & FOLL_LONGTERM) {
+ if (WARN_ON_ONCE(locked))
+ return -EINVAL;
+ /*
+ * This will check the vmas (even if our vmas arg is NULL)
+ * and return -ENOTSUPP if DAX isn't allowed in this case:
+ */
+ return __gup_longterm_locked(tsk, mm, start, nr_pages, pages,
+ vmas, gup_flags | FOLL_TOUCH |
+ FOLL_REMOTE);
+ }
+
+ return __get_user_pages_locked(tsk, mm, start, nr_pages, pages, vmas,
+ locked,
+ gup_flags | FOLL_TOUCH | FOLL_REMOTE);
+}
+EXPORT_SYMBOL(get_user_pages_remote);
+
/*
* This is the same as get_user_pages_remote(), just with a
* less-flexible calling convention where we assume that the task
projects / openwrt / staging / blogic.git / commitdiff