}
};
-static u16 sport_req[][7] = {
- { P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
- P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0},
- { P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
- P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0},
-};
+/*
+ * Setting the TFS pin selector for SPORT 0 based on whether the selected
+ * port id F or G. If the port is F then no conflict should exist for the
+ * TFS. When Port G is selected and EMAC then there is a conflict between
+ * the PHY interrupt line and TFS. Current settings prevent the conflict
+ * by ignoring the TFS pin when Port G is selected. This allows both
+ * ssm2602 using Port G and EMAC concurrently.
+ */
+#ifdef CONFIG_BF527_SPORT0_PORTF
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
+#else
+#define LOCAL_SPORT0_TFS (0)
+#endif
+
+static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+ P_SPORT0_DRPRI, P_SPORT0_RSCLK, LOCAL_SPORT0_TFS, 0},
+ {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, P_SPORT1_DRPRI,
+ P_SPORT1_RSCLK, P_SPORT1_TFS, 0} };
static int bf5xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
ret = -EINVAL;
break;
default:
+ printk(KERN_ERR "%s: Unknown DAI format type\n", __func__);
ret = -EINVAL;
break;
}
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBS_CFS:
- ret = -EINVAL;
- break;
- case SND_SOC_DAIFMT_CBM_CFS:
- ret = -EINVAL;
- break;
case SND_SOC_DAIFMT_CBM_CFM:
break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ case SND_SOC_DAIFMT_CBM_CFS:
case SND_SOC_DAIFMT_CBS_CFM:
ret = -EINVAL;
break;
default:
+ printk(KERN_ERR "%s: Unknown DAI master type\n", __func__);
ret = -EINVAL;
break;
}