Starting with kernel 4.14 and gcc 7, the kernel doesn't fit into the
2 MB reserved for the kernel partition by the OEM firmware anymore.
This patch increases the kernel partition from 2 MB to 4 MB, at the
expense of the rootfs, for all supported kernels.
WARNING: This breaks sysupgrade! Flashing a firmware containing this
changed partitioning from an older image with 2 MB reserved for the
kernel partion requires the tftp recovery procedure, thereby losing
all settings.
This change follows the functional example of the Netgear r7800, but
has not been runtime tested on a Netgear Nighthawk X4 R7500v2.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
kernel@1480000 {
label = "kernel";
- reg = <0x1480000 0x0200000>;
+ reg = <0x1480000 0x0400000>;
};
- ubi@1680000 {
+ ubi@1880000 {
label = "ubi";
- reg = <0x1680000 0x1E00000>;
+ reg = <0x1880000 0x1C00000>;
};
netgear@3480000 {
kernel@1480000 {
label = "kernel";
- reg = <0x1480000 0x0200000>;
+ reg = <0x1480000 0x0400000>;
};
- ubi@1680000 {
+ ubi@1880000 {
label = "ubi";
- reg = <0x1680000 0x1E00000>;
+ reg = <0x1880000 0x1C00000>;
};
netgear@3480000 {
define Device/netgear_r7500v2
$(call Device/DniImage)
DEVICE_DTS := qcom-ipq8064-r7500v2
- KERNEL_SIZE := 2097152
+ KERNEL_SIZE := 4194304
NETGEAR_BOARD_ID := R7500v2
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
BLOCKSIZE := 128k