#define PHB_MEM_2_SIZE_LOW 0x02E0
#define PHB_DOSHOLE_OFFSET 0x08E0
+/* CalIOC2 specific */
+#define PHB_SAVIOR_L2 0x0DB0
+
/* PHB_CONFIG_RW */
#define PHB_TCE_ENABLE 0x20000000
#define PHB_SLOT_DISABLE 0x1C000000
static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
static void calgary_tce_cache_blast(struct iommu_table *tbl);
+static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
static struct cal_chipset_ops calgary_chip_ops = {
.handle_quirks = calgary_handle_quirks,
.tce_cache_blast = calgary_tce_cache_blast
};
+static struct cal_chipset_ops calioc2_chip_ops = {
+ .handle_quirks = calioc2_handle_quirks,
+ .tce_cache_blast = NULL
+};
+
static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
/* enable this to stress test the chip's TCE cache */
tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
tce_free(tbl, 0, tbl->it_size);
- tbl->chip_ops = &calgary_chip_ops;
+ if (is_calgary(dev->device))
+ tbl->chip_ops = &calgary_chip_ops;
+ else if (is_calioc2(dev->device))
+ tbl->chip_ops = &calioc2_chip_ops;
+ else
+ BUG();
calgary_reserve_regions(dev);
readq(target); /* flush */
}
-static void __init calgary_handle_quirks(struct iommu_table *tbl,
- struct pci_dev *dev)
+static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev)
+{
+ unsigned char busnum = dev->bus->number;
+ void __iomem *bbar = tbl->bbar;
+ void __iomem *target;
+ u32 val;
+
+ /*
+ * CalIOC2 designers recommend setting bit 8 in 0xnDB0 to 1
+ */
+ target = calgary_reg(bbar, phb_offset(busnum) | PHB_SAVIOR_L2);
+ val = cpu_to_be32(readl(target));
+ val |= 0x00800000;
+ writel(cpu_to_be32(val), target);
+}
+
+static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev)
{
unsigned char busnum = dev->bus->number;
* Give split completion a longer timeout on bus 1 for aic94xx
* http://bugzilla.kernel.org/show_bug.cgi?id=7180
*/
- if (busnum == 1)
+ if (is_calgary(dev->device) && (busnum == 1))
calgary_set_split_completion_timeout(tbl->bbar, busnum,
CCR_2SEC_TIMEOUT);
}