qca9533 is a costdown version of qca9531 which doesn't have USB and PCIE.
Rename the misleading dtsi names and fix the SoC type of gl-ar300m.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[apply the changes for the gl-x750 as well]
Signed-off-by: Mathias Kresin <dev@kresin.me>
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "glinet,ar300m", "qca,qca9531";
+ model = "GL.iNet GL-AR300M";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ button0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ button1 {
+ label = "button right";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ button3 {
+ label = "button left";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "gl-ar300m:green:usb";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&hub_port>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan {
+ label = "gl-ar300m:green:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ lan {
+ label = "gl-ar300m:green:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ status {
+ label = "gl-ar300m:green:status";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&swphy4>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "qca9531_glinet_ar300m.dtsi"
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "reserved";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "spinand,mt29f";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x000000 0x0200000>;
+ };
+
+ partition@1 {
+ label = "ubi";
+ reg = <0x200000 0x7e00000>;
+ };
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9531_glinet_ar300m.dtsi"
+
+&spi {
+ status = "okay";
+ num-cs = <0>;
+
+ flash@0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@2 {
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ };
+
+ art: partition@3 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "glinet,gl-x750", "qca,qca9531";
+ model = "GL.iNet GL-X750";
+
+ keys {
+ compatible = "gpio-keys-polled";
+
+ poll-interval = <20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ button0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "gl-x750:green:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "gl-x750:green:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "gl-x750:green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan {
+ label = "gl-x750:green:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ 4g {
+ label = "gl-x750:green:4g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&swphy4>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
-#include "ath79.dtsi"
-
-/ {
- compatible = "qca,qca9533";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "mips,mips24Kc";
- clocks = <&pll ATH79_CLK_CPU>;
- reg = <0>;
- };
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <25000000>;
- };
-
- ahb {
- apb {
- ddr_ctrl: memory-controller@18000000 {
- compatible = "qca,ar9530-ddr-controller",
- "qca,ar7240-ddr-controller";
- reg = <0x18000000 0x128>;
-
- #qca,ddr-wb-channel-cells = <1>;
- };
-
- uart: uart@18020000 {
- compatible = "ns16550a";
- reg = <0x18020000 0x20>;
-
- interrupts = <3>;
-
- clocks = <&pll ATH79_CLK_REF>;
- clock-names = "uart";
-
- reg-io-width = <4>;
- reg-shift = <2>;
- no-loopback-test;
-
- status = "disabled";
- };
-
- usb_phy: usb-phy@18030000 {
- compatible = "qca,ar7200-usb-phy";
- reg = <0x18030000 0x100>;
- #phy-cells = <0>;
-
- reset-names = "usb-phy", "usb-suspend-override";
- resets = <&rst 4>, <&rst 3>;
-
- status = "disabled";
- };
-
- gpio: gpio@18040000 {
- compatible = "qca,ar9530-gpio",
- "qca,ar9340-gpio";
- reg = <0x18040000 0x28>;
-
- interrupts = <2>;
- ngpios = <20>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pinmux: pinmux@1804002c {
- compatible = "pinctrl-single";
-
- reg = <0x1804002c 0x48>;
-
- #size-cells = <0>;
-
- pinctrl-single,bit-per-mux;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x1>;
- #pinctrl-cells = <2>;
-
- jtag_disable_pins: pinmux_jtag_disable_pins {
- pinctrl-single,bits = <0x40 0x2 0x2>;
- };
- };
-
- pll: pll-controller@18050000 {
- compatible = "qca,qca9530-pll", "syscon";
- reg = <0x18050000 0x48>;
-
- #clock-cells = <1>;
- clock-output-names = "cpu", "ddr", "ahb";
- clocks = <&extosc>;
- };
-
- wdt: wdt@18060008 {
- compatible = "qca,qca9530-wdt", "qca,ar7130-wdt";
- reg = <0x18060008 0x8>;
-
- interrupts = <4>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "wdt";
- };
-
- rst: reset-controller@1806001c {
- compatible = "qca,qca9530-reset",
- "qca,ar7100-reset";
- reg = <0x1806001c 0xac>;
-
- #reset-cells = <1>;
-
- intc2: interrupt-controller {
- compatible = "qca,ar9340-intc";
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- qca,int-status-addr = <0xac>;
- qca,pending-bits = <0xf>, /* wmac */
- <0x1f0>; /* pcie rc1 */
-
- qca,ddr-wb-channel-interrupts = <0>, <1>;
- qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
- };
- };
-
- pcie0: pcie-controller@180c0000 {
- compatible = "qcom,ar7240-pci";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x0 0x0>;
- reg = <0x180c0000 0x1000>, /* CRP */
- <0x180f0000 0x100>, /* CTRL */
- <0x14000000 0x1000>; /* CFG */
- reg-names = "crp_base", "ctrl_base", "cfg_base";
- ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
- 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
- interrupt-parent = <&intc2>;
- interrupts = <1>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-map-mask = <0 0 0 1>;
- interrupt-map = <0 0 0 0 &pcie0 0>;
- status = "disabled";
- };
-
- gmac: gmac@18070000 {
- compatible = "qca,ar9330-gmac";
- reg = <0x18070000 0x4>;
- };
-
- wmac: wmac@18100000 {
- compatible = "qca,qca9530-wmac";
- reg = <0x18100000 0x230000>;
-
- interrupt-parent = <&intc2>;
- interrupts = <0>;
-
- status = "disabled";
- };
- };
-
- usb0: usb@1b000000 {
- compatible = "generic-ehci";
- reg = <0x1b000000 0x1000>;
-
- interrupts = <3>;
- resets = <&rst 5>;
- reset-names = "usb-host";
- dr_mode = "host";
-
- has-transaction-translator;
- caps-offset = <0x100>;
-
- phy-names = "usb-phy";
- phys = <&usb_phy>;
-
- status = "disabled";
- };
-
- spi: spi@1f000000 {
- compatible = "qca,ar9530-spi", "qca,ar7100-spi";
- reg = <0x1f000000 0x10>;
-
- clocks = <&pll ATH79_CLK_AHB>;
- clock-names = "ahb";
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- };
-
-};
-
-&cpuintc {
- qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
- qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
- <&ddr_ctrl 1>;
-};
-
-ð0 {
- compatible = "qca,qca9530-eth", "syscon";
- pll-data = <0x82000101 0x80000101 0x80001313>;
- reg = <0x19000000 0x200
- 0x18070000 0x4>;
- pll-reg = <0x4 0x2c 17>;
- pll-handle = <&pll>;
-
- reset-names = "mac";
- resets = <&rst 9>;
-
- phy-mode = "mii";
-};
-
-
-&mdio1 {
- status = "okay";
- resets = <&rst 23>;
- reset-names = "mdio";
- builtin-switch;
-
- builtin_switch: switch0@1f {
- compatible = "qca,ar8229-builtin";
-
- reg = <0x1f>;
- resets = <&rst 8>;
- reset-names = "switch";
- phy-mode = "gmii";
- phy4-mii-enable;
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swphy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "mii";
- };
-
- swphy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "mii";
- };
- };
- };
-};
-
-ð1 {
- status = "okay";
-
- compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
- resets = <&rst 13>;
- reset-names = "mac";
-
- phy-mode = "gmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9533.dtsi"
-
-/ {
- compatible = "glinet,ar300m", "qca,qca9533";
- model = "GL.iNet GL-AR300M";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- pinctrl-names = "default";
- pinctrl-0 = <&jtag_disable_pins>;
-
- button0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- button1 {
- label = "button right";
- linux,code = <BTN_0>;
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- button3 {
- label = "button left";
- linux,code = <BTN_1>;
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "gl-ar300m:green:usb";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- trigger-sources = <&hub_port>;
- linux,default-trigger = "usbport";
- };
-
- wlan {
- label = "gl-ar300m:green:wlan";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- lan {
- label = "gl-ar300m:green:lan";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- status {
- label = "gl-ar300m:green:status";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-ð0 {
- status = "okay";
- mtd-mac-address = <&art 0x0>;
- phy-handle = <&swphy4>;
-};
-
-ð1 {
- mtd-mac-address = <&art 0x6>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x1002>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "qca9533_glinet_ar300m.dtsi"
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "winbond,w25q128", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "reserved";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition@3 {
- label = "art";
- reg = <0xff0000 0x010000>;
- };
- };
- };
-
- flash@1 {
- compatible = "spinand,mt29f";
- reg = <1>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x000000 0x0200000>;
- };
-
- partition@1 {
- label = "ubi";
- reg = <0x200000 0x7e00000>;
- };
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9533_glinet_ar300m.dtsi"
-
-&spi {
- status = "okay";
- num-cs = <0>;
-
- flash@0 {
- compatible = "winbond,w25q128", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@1 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@2 {
- label = "firmware";
- reg = <0x050000 0xfa0000>;
- };
-
- art: partition@3 {
- label = "art";
- reg = <0xff0000 0x010000>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9533.dtsi"
-
-/ {
- compatible = "glinet,gl-x750", "qca,qca9533";
- model = "GL.iNet GL-X750";
-
- keys {
- compatible = "gpio-keys-polled";
-
- poll-interval = <20>;
- pinctrl-names = "default";
- pinctrl-0 = <&jtag_disable_pins>;
-
- button0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "gl-x750:green:power";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wlan2g {
- label = "gl-x750:green:wlan2g";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wlan5g {
- label = "gl-x750:green:wlan5g";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wan {
- label = "gl-x750:green:wan";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- 4g {
- label = "gl-x750:green:4g";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&uart {
- status = "okay";
-};
-
-&usb0 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- hub_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <0>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- art: partition@50000 {
- label = "art";
- reg = <0x050000 0x010000>;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x060000 0xfa0000>;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
- mtd-mac-address = <&art 0x0>;
- phy-handle = <&swphy4>;
-};
-
-ð1 {
- mtd-mac-address = <&art 0x6>;
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x1002>;
-};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include "qca9533.dtsi"
+#include "qca953x.dtsi"
/ {
chosen {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include <dt-bindings/clock/ath79-clk.h>
+#include "ath79.dtsi"
+
+/ {
+ compatible = "qca,qca9530";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <25000000>;
+ };
+
+ ahb {
+ apb {
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9530-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x128>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns16550a";
+ reg = <0x18020000 0x20>;
+
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_REF>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ usb_phy: usb-phy@18030000 {
+ compatible = "qca,ar7200-usb-phy";
+ reg = <0x18030000 0x100>;
+ #phy-cells = <0>;
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9530-gpio",
+ "qca,ar9340-gpio";
+ reg = <0x18040000 0x28>;
+
+ interrupts = <2>;
+ ngpios = <20>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pinmux: pinmux@1804002c {
+ compatible = "pinctrl-single";
+
+ reg = <0x1804002c 0x48>;
+
+ #size-cells = <0>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x40 0x2 0x2>;
+ };
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,qca9530-pll", "syscon";
+ reg = <0x18050000 0x48>;
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ clocks = <&extosc>;
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,qca9530-wdt", "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,qca9530-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0xac>;
+
+ #reset-cells = <1>;
+
+ intc2: interrupt-controller {
+ compatible = "qca,ar9340-intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,int-status-addr = <0xac>;
+ qca,pending-bits = <0xf>, /* wmac */
+ <0x1f0>; /* pcie rc1 */
+
+ qca,ddr-wb-channel-interrupts = <0>, <1>;
+ qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
+ };
+ };
+
+ pcie0: pcie-controller@180c0000 {
+ compatible = "qcom,ar7240-pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x0>;
+ reg = <0x180c0000 0x1000>, /* CRP */
+ <0x180f0000 0x100>, /* CTRL */
+ <0x14000000 0x1000>; /* CFG */
+ reg-names = "crp_base", "ctrl_base", "cfg_base";
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
+ 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
+ interrupt-parent = <&intc2>;
+ interrupts = <1>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-map-mask = <0 0 0 1>;
+ interrupt-map = <0 0 0 0 &pcie0 0>;
+ status = "disabled";
+ };
+
+ gmac: gmac@18070000 {
+ compatible = "qca,ar9330-gmac";
+ reg = <0x18070000 0x4>;
+ };
+
+ wmac: wmac@18100000 {
+ compatible = "qca,qca9530-wmac";
+ reg = <0x18100000 0x230000>;
+
+ interrupt-parent = <&intc2>;
+ interrupts = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ usb0: usb@1b000000 {
+ compatible = "generic-ehci";
+ reg = <0x1b000000 0x1000>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+ reset-names = "usb-host";
+ dr_mode = "host";
+
+ has-transaction-translator;
+ caps-offset = <0x100>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar9530-spi", "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
+};
+
+&cpuintc {
+ qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
+ <&ddr_ctrl 1>;
+};
+
+ð0 {
+ compatible = "qca,qca9530-eth", "syscon";
+ pll-data = <0x82000101 0x80000101 0x80001313>;
+ reg = <0x19000000 0x200
+ 0x18070000 0x4>;
+ pll-reg = <0x4 0x2c 17>;
+ pll-handle = <&pll>;
+
+ reset-names = "mac";
+ resets = <&rst 9>;
+
+ phy-mode = "mii";
+};
+
+
+&mdio1 {
+ status = "okay";
+ resets = <&rst 23>;
+ reset-names = "mdio";
+ builtin-switch;
+
+ builtin_switch: switch0@1f {
+ compatible = "qca,ar8229-builtin";
+
+ reg = <0x1f>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+ phy-mode = "gmii";
+ phy4-mii-enable;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ swphy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "mii";
+ };
+
+ swphy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "mii";
+ };
+ };
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
+ resets = <&rst 13>;
+ reset-names = "mac";
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
TARGET_DEVICES += glinet_ar150
define Device/glinet_ar300m_nor
- ATH_SOC := qca9533
+ ATH_SOC := qca9531
DEVICE_TITLE := GL.iNet GL-AR300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
IMAGE_SIZE := 16000k
TARGET_DEVICES += glinet_ar300m_nor
define Device/glinet_gl-x750
- ATH_SOC := qca9533
+ ATH_SOC := qca9531
DEVICE_TITLE := GL.iNet GL-X750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887
IMAGE_SIZE := 16000k
define Device/glinet_ar300m_nand
- ATH_SOC := qca9533
+ ATH_SOC := qca9531
DEVICE_TITLE := GL-AR300M (NAND)
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport
KERNEL_SIZE := 2048k
projects / openwrt / staging / dangole.git / commitdiff