--- /dev/null
+. /lib/functions.sh
+
+update_bootconfig() {
+ local offset=$1
+ local index="$2"
+ local cfgpart=$(find_mmc_part "0:BOOTCONFIG")
+ local cur_index
+
+ if [ -z "$cfgpart" ]; then
+ echo "failed to get the partition: \"0:BOOTCONFIG\""
+ return 1
+ fi
+
+ cur_index=$(dd if=${cfgpart} bs=1 count=1 skip=$offset 2> /dev/null | hexdump -e '"%d"')
+ if [ ${index} != ${cur_index} ]; then
+ echo "updating \"0:BOOTCONFIG\""
+ echo -en "\x0${index}" | \
+ dd of=${cfgpart} bs=1 count=1 seek=$offset conv=notrunc 2>/dev/null
+ fi
+
+ # also update 0:BOOTCONFIG1 if exists
+ cfgpart=$(find_mmc_part "0:BOOTCONFIG1")
+ [ -z "$cfgpart" ] && return
+
+ cur_index=$(dd if=${cfgpart} bs=1 count=1 skip=$offset 2> /dev/null | hexdump -e '"%d"')
+ if [ ${index} != ${cur_index} ]; then
+ echo "updating \"0:BOOTCONFIG1\""
+ echo -en "\x0${index}" | \
+ dd of=${cfgpart} bs=1 count=1 seek=$offset conv=notrunc 2>/dev/null
+ fi
+}
+
+### Note ###
+# After the commit bad1835f27ec31dbc30060b03cc714212275168a in fstools,
+# p17 (label: "rootfs_data") is mounted as a rootfs_data on boot instead
+# of the loop device labeled as "rootfs_data" in p15 (label: "rootfs").
+#
+# cmdline flag is added to avoid mount "rootfs_data" partition by the
+# commit 964d1e3af0e111bad6d393f8a3be702e334c2398 in fstools, but
+# NCP-HG100 doesn't use it because it has a large (abount 1.6GB)
+# "rootfs_data" partition and the advantage is larger than the
+# disadvantages, such as overwriting the stock data in "rootfs_data"
+# partition.
+sony_emmc_do_upgrade() {
+ local tar_file=$1
+ local kernel_dev
+ local rootfs_dev
+ local board_dir
+
+ kernel_dev=$(find_mmc_part "0:HLOS")
+ rootfs_dev=$(find_mmc_part "rootfs")
+ rootfs_data_dev=$(find_mmc_part "rootfs_data")
+
+ if [ -z "$kernel_dev" ] || [ -z "$rootfs_dev" ] || [ -z "$rootfs_data_dev" ]; then
+ echo "The partition name for kernel or rootfs or rootfs_data is not specified or failed to get the mmc device."
+ exit 1
+ fi
+
+ # use first partitions of kernel/rootfs for NCP-HG100
+ # - offset 88 (0x58): 0:HLOS (kernel)
+ # - offset 108 (0x6c): rootfs
+ update_bootconfig 88 0 || exit 1
+ update_bootconfig 108 0 || exit 1
+
+ board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ echo "Flashing kernel to ${kernel_dev}"
+ tar xf $tar_file ${board_dir}/kernel -O > $kernel_dev
+
+ echo "Flashing rootfs to ${rootfs_dev}"
+ tar xf $tar_file ${board_dir}/root -O > $rootfs_dev
+
+ echo "Format new rootfs_data"
+ mkfs.ext4 -F -L rootfs_data $rootfs_data_dev
+
+ if [ -e "$UPGRADE_BACKUP" ]; then
+ mkdir /tmp/new_root
+ mount -t ext4 $rootfs_data_dev /tmp/new_root && {
+ echo "Saving configurations to rootfs_data"
+ cp "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
+ umount /tmp/new_root
+ }
+ fi
+
+ echo "sysupgrade successful"
+
+ sync
+ umount -a
+ reboot -f
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include "qcom-ipq4019.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Sony NCP-HG100/Cellular";
+ compatible = "sony,ncp-hg100-cellular";
+
+ aliases {
+ led-boot = &led_cloud_green;
+ led-failsafe = &led_cloud_red;
+ led-running = &led_cloud_green;
+ led-upgrade = &led_cloud_green;
+ label-mac-device = &gmac0;
+ };
+
+ chosen {
+ bootargs = "console=ttyMSM0,115200n8 root=/dev/mmcblk0p15 rootfstype=squashfs,ext4";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ soc {
+ tcsr@1949000 {
+ status = "okay";
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ status = "okay";
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ status = "okay";
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ status = "okay";
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ dma@7984000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */
+ switch_initvlas = <0x0007c 0x54>; /* PORT0_STATUS */
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys-repeat {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&keys_pins>;
+ pinctrl-names = "default";
+ autorepeat;
+
+ key-volup {
+ label = "volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_KEY>;
+ };
+
+ key-voldown {
+ label = "volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_KEY>;
+ };
+
+ key-alexatrigger {
+ label = "alexa trigger";
+ linux,code = <BTN_0>;
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_KEY>;
+ };
+
+ key-mute {
+ label = "mic mute";
+ linux,code = <BTN_1>;
+ gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ key-reset {
+ label = "reset";
+ gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ key-wps {
+ label = "setup";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&tlmm {
+ pinctrl-0 = <&bt_pins>, <&aud_pins>, <&mcu_pins>;
+ pinctrl-names = "default";
+
+ /*
+ * uart0 is shared for debug console and Z-Wave,
+ * use only for debug console in OpenWrt.
+ *
+ * 1: debug console
+ * 0: Z-Wave
+ */
+ uart0_ctrl_pins: uart0_ctrl_pinmux {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ output-high;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ /*
+ * reset pin for Z-Wave
+ * active-low, >= 20ns
+ */
+ zwave_pins: zwave_pinmux {
+ mux {
+ pins = "gpio59";
+ function = "gpio";
+ output-high;
+ };
+ };
+
+ serial_1_pins: serial1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9",
+ "gpio10", "gpio11";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ bt_pins: bt_pinmux {
+ mux_reset {
+ pins = "gpio66";
+ function = "gpio";
+ output-high;
+ };
+
+ mux_pwr {
+ pins = "gpio68";
+ function = "gpio";
+ output-high;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ i2c_1_pins: i2c_1_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "blsp_i2c1";
+ bias-disable;
+ };
+ };
+
+ keys_pins: keys_pinmux {
+ mux_1 {
+ pins = "gpio39", "gpio40", "gpio42", "gpio47";
+ function = "gpio";
+ bias-disable;
+ };
+
+ mux_2 {
+ pins = "gpio2";
+ function = "gpio";
+ input;
+ };
+ };
+
+ sd_pins: sd_pins {
+ mux {
+ function = "sdio";
+ pins = "gpio23", "gpio24", "gpio25", "gpio26",
+ "gpio28", "gpio29", "gpio30", "gpio31";
+ drive-strength = <4>;
+ };
+
+ mux_sd_clk {
+ function = "sdio";
+ pins = "gpio27";
+ drive-strength = <16>;
+ };
+
+ mux_sd7 {
+ function = "sdio";
+ pins = "gpio32";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ aud_pins: aud_pinmux {
+ mux {
+ pins = "gpio48", "gpio49", "gpio50", "gpio51";
+ function = "aud_pin";
+ };
+ };
+
+ alc1304_pins: alc1304_pinmux {
+ mux_1 {
+ pins = "gpio44";
+ function = "gpio";
+ bias-disable;
+ };
+
+ mux_2 {
+ pins = "gpio45";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ cx2902x_reset: cx2902x_pinmux {
+ mux_1 {
+ pins = "gpio64";
+ function = "gpio";
+ bias-disable;
+ };
+
+ mux_2 {
+ pins = "gpio65";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ lte_pins: lte_pinmux {
+ mux_en {
+ pins = "gpio20";
+ function = "gpio";
+ output-high;
+ };
+
+ mux_reset {
+ pins = "gpio35";
+ function = "gpio";
+ input;
+ };
+ };
+
+ usb3_pins: usb3_pinmux {
+ mux_en {
+ pins = "gpio36";
+ function = "gpio";
+ output-high;
+ };
+
+ mux_flt {
+ pins = "gpio4";
+ function = "gpio";
+ input;
+ };
+ };
+
+ mcu_pins: mcu_pinmux {
+ mux_boot {
+ pins = "gpio38";
+ function = "gpio";
+ output-low;
+ };
+
+ mux_reset {
+ pins = "gpio5";
+ function = "gpio";
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_i2c4 {
+ /*
+ * There is no driver for the following devices:
+ * - CY8C4014LQI@14 : Touch-Sensor for buttons on top
+ * - MINI54FDE@15 : MCU for Fan/RGB LED/Thermal control
+ * - ALC5629@18 : I2S/PCM Audio DAC
+ * - CX20924@41 : Voice Input Processor
+ */
+ pinctrl-0 = <&i2c_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ led-controller@32 {
+ compatible = "ti,lp55231";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <0>;
+ enable-gpio = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ chan-name = "green:wan";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ };
+
+ led@1 {
+ chan-name = "blue:wan";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN;
+ };
+
+ led@2 {
+ chan-name = "green:lan";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led@3 {
+ chan-name = "blue:lan";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x3>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led@4 {
+ chan-name = "green:wlan-2";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <2>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led@5 {
+ chan-name = "blue:wlan-2";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <2>;
+ };
+
+ led@6 {
+ chan-name = "red:wan";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN;
+ };
+
+ led@7 {
+ chan-name = "red:lan";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ led@8 {
+ chan-name = "red:wlan-2";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <2>;
+ };
+ };
+
+ led-controller@33 {
+ compatible = "ti,lp55231";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ chan-name = "green:wlan-5";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ linux,default-trigger = "phy1tpt";
+ function-enumerator = <5>;
+ };
+
+ led@1 {
+ chan-name = "blue:wlan-5";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <5>;
+ };
+
+ led@2 {
+ chan-name = "green:wan-4";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */
+ function-enumerator = <4>; /* WWAN/LTE/4G */
+ };
+
+ led@3 {
+ chan-name = "blue:wan-4";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x3>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */
+ function-enumerator = <4>; /* WWAN/LTE/4G */
+ };
+
+ led_cloud_green: led@4 {
+ chan-name = "green:power";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ led@5 {
+ chan-name = "blue:power";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ led@6 {
+ chan-name = "red:wlan-5";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WLAN;
+ function-enumerator = <5>;
+ };
+
+ led@7 {
+ chan-name = "red:wan-4";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x7>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */
+ function-enumerator = <4>; /* WWAN/LTE/4G */
+ };
+
+ led_cloud_red: led@8 {
+ chan-name = "red:power";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x8>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>, <&uart0_ctrl_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&blsp1_uart2 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
+};
+
+&prng {
+ status = "okay";
+};
+
+&vqmmc {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+ pinctrl-0 = <&sd_pins>;
+ pinctrl-names = "default";
+ vqmmc-supply = <&vqmmc>;
+ non-removable;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ emmc@0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+
+ pinctrl-0 = <&usb3_pins>, <<e_pins>;
+ pinctrl-names = "default";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ device@1 {
+ compatible = "usb1bc7,1900";
+ reg = <1>;
+ };
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Sony-NCP-HG100-Cellular";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Sony-NCP-HG100-Cellular";
+};
+
+&watchdog {
+ status = "okay";
+};
projects / openwrt / staging / nbd.git / commitdiff