spi: use simplified spi_sync() calling convention

Given the patch which simplifies the spi_sync calling convention, this one
updates the callers of that routine which tried using it according to the
previous specification.  (Most didn't.)

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index f59aecf5ec1565fe4959308edc8cc034c3a0a9a3..fd9c5d51870a095511e8d81728081802ad09e5ed 100644 (file)
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -267,13 +267,12 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
        ts->irq_disabled = 0;
        enable_irq(spi->irq);
 
-       if (req->msg.status)
-               status = req->msg.status;
-
-       /* on-wire is a must-ignore bit, a BE12 value, then padding */
-       sample = be16_to_cpu(req->sample);
-       sample = sample >> 3;
-       sample &= 0x0fff;
+       if (status == 0) {
+               /* on-wire is a must-ignore bit, a BE12 value, then padding */
+               sample = be16_to_cpu(req->sample);
+               sample = sample >> 3;
+               sample &= 0x0fff;
+       }
 
        kfree(req);
        return status ? status : sample;

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index a6469218f194cee8b102b65e0ef3ab423183c287..365024b83d3da9df9b6e4f7a9d4cf6d216ba523d 100644 (file)
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -176,8 +176,6 @@ mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len)
                                DMA_FROM_DEVICE);
 
        status = spi_sync(host->spi, &host->readback);
-       if (status == 0)
-               status = host->readback.status;
 
        if (host->dma_dev)
                dma_sync_single_for_cpu(host->dma_dev,
@@ -480,8 +478,6 @@ mmc_spi_command_send(struct mmc_spi_host *host,
                                DMA_BIDIRECTIONAL);
        }
        status = spi_sync(host->spi, &host->m);
-       if (status == 0)
-               status = host->m.status;
 
        if (host->dma_dev)
                dma_sync_single_for_cpu(host->dma_dev,
@@ -624,8 +620,6 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t)
                                DMA_BIDIRECTIONAL);
 
        status = spi_sync(spi, &host->m);
-       if (status == 0)
-               status = host->m.status;
 
        if (status != 0) {
                dev_dbg(&spi->dev, "write error (%d)\n", status);
@@ -726,8 +720,6 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t)
                }
 
                status = spi_sync(spi, &host->m);
-               if (status == 0)
-                       status = host->m.status;
 
                if (host->dma_dev) {
                        dma_sync_single_for_cpu(host->dma_dev,
@@ -905,8 +897,6 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
                                        DMA_BIDIRECTIONAL);
 
                tmp = spi_sync(spi, &host->m);
-               if (tmp == 0)
-                       tmp = host->m.status;
 
                if (host->dma_dev)
                        dma_sync_single_for_cpu(host->dma_dev,

diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index 3e183cfee10f134dabe5ffe6db57e9f65d257f45..1f956dc5d56eeb57806bb66b471422ae5734ad37 100644 (file)
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -89,13 +89,9 @@ static int max6902_get_reg(struct device *dev, unsigned char address,
 
        /* do the i/o */
        status = spi_sync(spi, &message);
-       if (status == 0)
-               status = message.status;
-       else
-               return status;
-
-       *data = chip->rx_buf[1];
 
+       if (status == 0)
+               *data = chip->rx_buf[1];
        return status;
 }
 
@@ -125,9 +121,7 @@ static int max6902_get_datetime(struct device *dev, struct rtc_time *dt)
 
        /* do the i/o */
        status = spi_sync(spi, &message);
-       if (status == 0)
-               status = message.status;
-       else
+       if (status)
                return status;
 
        /* The chip sends data in this order: