ipq807x: add support for ZTE MF269
authorChukun Pan <amadeus@jmu.edu.cn>
Sat, 3 Jun 2023 15:20:13 +0000 (23:20 +0800)
committerChukun Pan <amadeus@jmu.edu.cn>
Thu, 14 Dec 2023 02:30:19 +0000 (10:30 +0800)
Hardware specifications:
  SoC: Qualcomm IPQ8071A
  RAM: 512MB of DDR3
  Flash1: Eon EN25S64 8MB
  Flash2: MX30UF2G18AC 256MB
  Ethernet: 2x 2.5G RJ45 port
  Phone: 1x RJ11 port (SPI)
  USB: 1x Type-C 2.0 port
  WiFi1: QCN5024 2.4GHz
  WiFi2: QCN5054 5GHz
  Button: Reset, WPS

Flash instructions:
  1. Connect the router via serial port (115200 8N1 1.8V)
  2. Download the initramfs image, rename it to initramfs.bin,
     and host it with the tftp server.
  3. Interrupt U-Boot and run these commands:
     tftpboot initramfs.bin
     bootm
  4. After openwrt boots up, use scp or luci web
     to upload sysupgrade.bin to upgrade.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
package/firmware/ipq-wifi/Makefile
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts [new file with mode: 0644]
target/linux/qualcommax/image/ipq807x.mk
target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

index cbd61c5be8a8ec0caf6cb88378903c83b5c73b99..ef1a456403a71bd7eb23108ef7c57b5182d3c641 100644 (file)
@@ -46,6 +46,7 @@ ALLWIFIBOARDS:= \
        xiaomi_ax9000 \
        yyets_le1 \
        yuncore_ax880 \
+       zte_mf269 \
        zte_mf289f \
        zte_mf287 \
        zte_mf287plus \
@@ -155,6 +156,7 @@ $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
 $(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
 $(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
 $(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
+$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
 $(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
 $(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
 $(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts
new file mode 100644 (file)
index 0000000..8b05580
--- /dev/null
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074-512m.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ZTE MF269";
+       compatible = "zte,mf269", "qcom,ipq8074";
+
+       aliases {
+               serial0 = &blsp1_uart5;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &dp6_syn;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+               bootargs-append = " root=/dev/ubiblock0_0";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+               pinctrl-0 = <&button_pins>;
+               pinctrl-names = "default";
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+               };
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "white:power";
+                       gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&tlmm {
+       button_pins: button_pins {
+               mux {
+                       pins = "gpio37", "gpio46";
+                       function = "gpio";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+       };
+
+       i2c_pins: i2c-pins {
+               pins = "gpio21", "gpio22";
+               function = "blsp4_i2c1";
+               drive-strength = <8>;
+               bias-disable;
+       };
+
+       mdio_pins: mdio-pins {
+               mdc {
+                       pins = "gpio68";
+                       function = "mdc";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+
+               mdio {
+                       pins = "gpio69";
+                       function = "mdio";
+                       drive-strength = <8>;
+                       bias-pull-up;
+               };
+       };
+
+       usb_pwr_pins: usb_pwr_pins {
+               mux {
+                       pins = "gpio29";
+                       function = "gpio";
+                       drive-strength = <8>;
+                       bias-disable;
+                       output-high;
+               };
+       };
+};
+
+&blsp1_spi1 {
+       pinctrl-0 = <&spi_0_pins>;
+       pinctrl-names = "default";
+       cs-select = <0>;
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "0:sbl1";
+                               reg = <0x0 0x50000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "0:mibib";
+                               reg = <0x50000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "0:bootconfig";
+                               reg = <0x60000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@80000 {
+                               label = "0:bootconfig1";
+                               reg = <0x80000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@a0000 {
+                               label = "0:qsee";
+                               reg = <0xa0000 0x180000>;
+                               read-only;
+                       };
+
+                       partition@220000 {
+                               label = "0:qsee_1";
+                               reg = <0x220000 0x180000>;
+                               read-only;
+                       };
+
+                       partition@3a0000 {
+                               label = "0:devcfg";
+                               reg = <0x3a0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@3b0000 {
+                               label = "0:devcfg_1";
+                               reg = <0x3b0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@3c0000 {
+                               label = "0:apdp";
+                               reg = <0x3c0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@3d0000 {
+                               label = "0:apdp_1";
+                               reg = <0x3d0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@3e0000 {
+                               label = "0:rpm";
+                               reg = <0x3e0000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@420000 {
+                               label = "0:rpm_1";
+                               reg = <0x420000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@460000 {
+                               label = "0:cdt";
+                               reg = <0x460000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@470000 {
+                               label = "0:cdt_1";
+                               reg = <0x470000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@480000 {
+                               label = "0:appsblenv";
+                               reg = <0x480000 0x10000>;
+                       };
+
+                       partition@490000 {
+                               label = "0:appsbl";
+                               reg = <0x490000 0xc0000>;
+                               read-only;
+                       };
+
+                       partition@550000 {
+                               label = "0:appsbl_1";
+                               reg = <0x550000 0xc0000>;
+                               read-only;
+                       };
+
+                       partition@610000 {
+                               label = "0:art";
+                               reg = <0x610000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@650000 {
+                               label = "0:ethphyfw";
+                               reg = <0x650000 0x80000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&blsp1_i2c5 {
+       pinctrl-0 = <&i2c_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       /* No driver exists */
+       aw9106: gpio-expander@5b {
+               reg = <0x5b>;
+               reset-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&blsp1_uart5 {
+       status = "okay";
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&prng {
+       status = "okay";
+};
+
+&qpic_bam {
+       status = "okay";
+};
+
+&qpic_nand {
+       status = "okay";
+
+       /*
+        * Bootloader will find the NAND DT node by the compatible and
+        * then "fixup" it by adding the partitions from the SMEM table
+        * using the legacy bindings thus making it impossible for us
+        * to change the partition table or utilize NVMEM for calibration.
+        * So add a dummy partitions node that bootloader will populate
+        * and set it as disabled so the kernel ignores it instead of
+        * printing warnings due to the broken way bootloader adds the
+        * partitions.
+        */
+       partitions {
+               status = "disabled";
+       };
+
+       nand@0 {
+               reg = <0>;
+               nand-ecc-strength = <4>;
+               nand-ecc-step-size = <512>;
+               nand-bus-width = <8>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "fota-flag";
+                               reg = <0x0000000 0x00a0000>;
+                               read-only;
+                       };
+
+                       partition@a0000 {
+                               label = "mac";
+                               reg = <0x00a0000 0x0080000>;
+                               read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_mac_0: macaddr@0 {
+                                               compatible = "mac-base";
+                                               reg = <0x0 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+
+                       partition@120000 {
+                               label = "cfg-param";
+                               reg = <0x0120000 0x1400000>;
+                               read-only;
+                       };
+
+                       partition@1520000 {
+                               label = "log";
+                               reg = <0x1520000 0x0600000>;
+                               read-only;
+                       };
+
+                       partition@1b20000 {
+                               label = "oops";
+                               reg = <0x1b20000 0x00a0000>;
+                               read-only;
+                       };
+
+                       partition@1bc0000 {
+                               label = "web";
+                               reg = <0x1bc0000 0x0800000>;
+                               read-only;
+                       };
+
+                       partition@23c0000 {
+                               label = "ubi_kernel";
+                               reg = <0x23c0000 0x3400000>;
+                       };
+
+                       partition@57c0000 {
+                               label = "0:wififw";
+                               reg = <0x57c0000 0x0800000>;
+                               read-only;
+                       };
+
+                       /* rootfs partition is the result of squashing
+                        * consecutive stock partitions:
+                        * - openwrt_data (25 MiB)
+                        * - data (30 MiB)
+                        * - fota (99 MiB)
+                        */
+                       partition@5fc0000 {
+                               label = "rootfs";
+                               reg = <0x5fc0000 0x9a00000>;
+                       };
+               };
+       };
+};
+
+&qusb_phy_0 {
+       status = "okay";
+};
+
+&ssphy_0 {
+       status = "okay";
+};
+
+&usb_0 {
+       pinctrl-0 = <&usb_pwr_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&mdio {
+       status = "okay";
+
+       pinctrl-0 = <&mdio_pins>;
+       pinctrl-names = "default";
+
+       qca8081_24: ethernet-phy@24 {
+               compatible = "ethernet-phy-id004d.d101";
+               reg = <24>;
+               reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+       };
+
+       qca8081_28: ethernet-phy@28 {
+               compatible = "ethernet-phy-id004d.d101";
+               reg = <28>;
+               reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&switch {
+       status = "okay";
+
+       switch_lan_bmp = <ESS_PORT5>; /* lan port bitmap */
+       switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
+       switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance1*/
+       switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
+
+       qcom,port_phyinfo {
+               port@5 {
+                       port_id = <5>;
+                       phy_address = <24>;
+                       port_mac_sel = "QGMAC_PORT";
+               };
+               port@6 {
+                       port_id = <6>;
+                       phy_address = <28>;
+                       port_mac_sel = "QGMAC_PORT";
+               };
+       };
+};
+
+&edma {
+       status = "okay";
+};
+
+&dp5_syn {
+       status = "okay";
+       phy-handle = <&qca8081_24>;
+       label = "lan";
+       nvmem-cell-names = "mac-address";
+       nvmem-cells = <&macaddr_mac_0 1>;
+};
+
+&dp6_syn {
+       status = "okay";
+       phy-handle = <&qca8081_28>;
+       label = "wan";
+       nvmem-cell-names = "mac-address";
+       nvmem-cells = <&macaddr_mac_0 0>;
+};
+
+&wifi {
+       status = "okay";
+
+       qcom,ath11k-calibration-variant = "ZTE-MF269";
+       qcom,ath11k-fw-memory-mode = <1>;
+};
index ce4d62d571d2baf7e92b2491efaad7672196ba75..d8416d10fbcc78e1e92205dd82fc8809b535a14b 100644 (file)
@@ -271,6 +271,20 @@ define Device/yuncore_ax880
 endef
 TARGET_DEVICES += yuncore_ax880
 
+define Device/zte_mf269
+       $(call Device/FitImage)
+       $(call Device/UbiFit)
+       DEVICE_VENDOR := ZTE
+       DEVICE_MODEL := MF269
+       BLOCKSIZE := 128k
+       PAGESIZE := 2048
+       DEVICE_DTS_CONFIG := config@ac04
+       SOC := ipq8071
+       KERNEL_SIZE := 53248k
+       DEVICE_PACKAGES := ipq-wifi-zte_mf269
+endef
+TARGET_DEVICES += zte_mf269
+
 define Device/zyxel_nbg7815
        $(call Device/FitImage)
        $(call Device/EmmcImage)
index cb70b272833a8f901c41d507a7551b3bf12d397a..5da17db3fa9344a1f1c949de087843505f47b23f 100644 (file)
@@ -23,7 +23,8 @@ ipq807x_setup_interfaces()
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
                ;;
        edgecore,eap102|\
-       yuncore,ax880)
+       yuncore,ax880|\
+       zte,mf269)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        edimax,cax1800)
index e14af79598734e9c1dceea8e7b445632a9fd5b8d..ac1405739d4e306e20c2b8885392806f271f6a61 100644 (file)
@@ -24,6 +24,7 @@ case "$FIRMWARE" in
        xiaomi,ax3600|\
        xiaomi,ax9000|\
        yuncore,ax880|\
+       zte,mf269|\
        zyxel,nbg7815)
                caldata_extract "0:art" 0x1000 0x20000
                ;;
index c7cacc99fe6f9e55f63ee4ebcffdf552b071b013..3573942c546a518226372f8d63e0f8d97adb1eee 100644 (file)
@@ -14,4 +14,8 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
                ;;
+       zte,mf269)
+               [ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress
+               ;;
 esac
index 5a40d5388371fe80124d09dcd0b863086042b74e..67fd0f540226b786f9502d740df86d4cad0ad355 100644 (file)
@@ -110,6 +110,11 @@ platform_do_upgrade() {
                fw_setenv upgrade_available 1
                nand_do_upgrade "$1"
                ;;
+       zte,mf269)
+               CI_KERN_UBIPART="ubi_kernel"
+               CI_ROOT_UBIPART="rootfs"
+               nand_do_upgrade "$1"
+               ;;
        zyxel,nbg7815)
                local config_mtdnum="$(find_mtd_index 0:bootconfig)"
                [ -z "$config_mtdnum" ] && reboot