Add support for detection of ES2.0 version of DRA7 family of
processors. ES2.0 is an incremental revision with various fixes
including the following:
- reset logic fixes
- few assymetric aging logic fixes
- MMC clock rate fixes
- Ethernet speed fixes
- edma fixes for mcasp
[ravibabu@ti.com: posted internal for an older bootloader]
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
case DRA752_ES1_0:
case DRA752_ES1_1:
+ case DRA752_ES2_0:
*prcm = &dra7xx_prcm;
*dplls_data = &dra7xx_dplls;
*omap_vcores = &dra752_volts;
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
+ case DRA752_ES2_0:
*regs = &ioregs_dra7xx_es1;
break;
case DRA722_ES1_0:
case DRA752_CONTROL_ID_CODE_ES1_1:
*omap_si_rev = DRA752_ES1_1;
break;
+ case DRA752_CONTROL_ID_CODE_ES2_0:
+ *omap_si_rev = DRA752_ES2_0;
+ break;
case DRA722_CONTROL_ID_CODE_ES1_0:
*omap_si_rev = DRA722_ES1_0;
break;
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
+ case DRA752_ES2_0:
switch (emif_nr) {
case 1:
*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
+ case DRA752_ES2_0:
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
break;
case DRA722_ES1_0:
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
+ case DRA752_ES2_0:
if (emif_nr == 1) {
*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
*size =
break;
case DRA752_ES1_0:
case DRA752_ES1_1:
+ case DRA752_ES2_0:
case DRA722_ES1_0:
bug_00339_regs_ptr = dra_bug_00339_regs;
*iterations = sizeof(dra_bug_00339_regs)/
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
#define DRA752_CONTROL_ID_CODE_ES1_1 0x1B99002F
+#define DRA752_CONTROL_ID_CODE_ES2_0 0x2B99002F
#define DRA722_CONTROL_ID_CODE_ES1_0 0x0B9BC02F
/* UART */
/* DRA7XX */
#define DRA752_ES1_0 0x07520100
#define DRA752_ES1_1 0x07520110
+#define DRA752_ES2_0 0x07520200
#define DRA722_ES1_0 0x07220100
/*