-/***********************************************************************************
- CED1401 usb driver. This basic loading is based on the usb-skeleton.c code that is:
+/*******************************************************************************
+ CED1401 usb driver. This basic loading is based on the usb-skeleton.c code that
+ is:
Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
Copyright (C) 2012 Alois Schloegl <alois.schloegl@ist.ac.at>
There is not a great deal of the skeleton left.
- All the remainder dealing specifically with the CED1401 is based on drivers written
- by CED for other systems (mainly Windows) and is:
+ All the remainder dealing specifically with the CED1401 is based on drivers
+ written by CED for other systems (mainly Windows) and is:
Copyright (C) 2010 Cambridge Electronic Design Ltd
Author Greg P Smith (greg@ced.co.uk)
{
struct ced_data *ced = to_ced_data(kref);
- /* Free up the output buffer, then free the output urb. Note that the interface member */
- /* of ced will probably be NULL, so cannot be used to get to dev. */
+ /* Free up the output buffer, then free the output urb. Note that the */
+ /* interface member of ced will probably be NULL, so cannot be used */
+ /* to get to dev. */
usb_free_coherent(ced->udev, OUTBUF_SZ, ced->coher_char_out,
ced->urb_char_out->transfer_dma);
usb_free_urb(ced->urb_char_out);
kref_put(&ced->kref, ced_delete);
goto exit;
}
- } else { /* uncomment this block if you want exclusive open */
+ } else { /* uncomment this block if you want exclusive open */
dev_err(&interface->dev, "%s: fail: already open\n", __func__);
retval = -EBUSY;
ced->open_count--;
usb_autopm_put_interface(ced->interface);
mutex_unlock(&ced->io_mutex);
- kref_put(&ced->kref, ced_delete); /* decrement the count on our device */
+ /* decrement the count on our device */
+ kref_put(&ced->kref, ced_delete);
return 0;
}
spin_lock(&ced->char_out_lock); /* already at irq level */
ced->num_output -= got; /* Now adjust the char send buffer */
ced->out_buff_get += got; /* to match what we did */
- if (ced->out_buff_get >= OUTBUF_SZ) /* Can't do this any earlier as data could be overwritten */
+
+ /* Can't do this any earlier as data could be overwritten */
+ if (ced->out_buff_get >= OUTBUF_SZ)
ced->out_buff_get = 0;
if (ced->num_output > 0) { /* if more to be done... */
/* maximum to send */
unsigned int count = ced->num_output;
- if ((ced->out_buff_get + count) > OUTBUF_SZ) /* does it cross buffer end? */
+ /* does it cross buffer end? */
+ if ((ced->out_buff_get + count) > OUTBUF_SZ)
count = OUTBUF_SZ - ced->out_buff_get;
/* we are done with stuff that changes */
spin_unlock(&ced->char_out_lock);
- memcpy(ced->coher_char_out, pDat, count); /* copy output data to the buffer */
+ /* copy output data to the buffer */
+ memcpy(ced->coher_char_out, pDat, count);
usb_fill_bulk_urb(ced->urb_char_out, ced->udev,
usb_sndbulkpipe(ced->udev,
ced->ep_addr[0]),
ced_writechar_callback, ced);
ced->urb_char_out->transfer_flags |=
URB_NO_TRANSFER_DMA_MAP;
- usb_anchor_urb(ced->urb_char_out, &ced->submitted); /* in case we need to kill it */
+
+ /* in case we need to kill it */
+ usb_anchor_urb(ced->urb_char_out, &ced->submitted);
ret = usb_submit_urb(ced->urb_char_out, GFP_ATOMIC);
dev_dbg(&ced->interface->dev, "%s: n=%d>%s<\n",
__func__, count, pDat);
- spin_lock(&ced->char_out_lock); /* grab lock for errors */
+
+ /* grab lock for errors */
+ spin_lock(&ced->char_out_lock);
+
if (ret) {
- ced->pipe_error[pipe] = 1; /* Flag an error to be handled later */
- ced->send_chars_pending = false; /* Allow other threads again */
+ /* Flag an error to be handled later */
+ ced->pipe_error[pipe] = 1;
+ /* Allow other threads again */
+ ced->send_chars_pending = false;
usb_unanchor_urb(ced->urb_char_out);
dev_err(&ced->interface->dev,
"%s: usb_submit_urb() returned %d\n",
spin_lock_irq(&ced->char_out_lock); /* Protect ourselves */
- if ((!ced->send_chars_pending) && /* Not currently sending */
- (ced->num_output > 0) && /* has characters to output */
- (can_accept_io_requests(ced))) { /* and current activity is OK */
+ if ((!ced->send_chars_pending) && /* Not currently sending */
+ (ced->num_output > 0) && /* has characters to output */
+ (can_accept_io_requests(ced))) { /* and current activity is OK */
unsigned int count = ced->num_output; /* Get a copy of the */
/* character count */
- ced->send_chars_pending = true; /* Set flag to lock out other threads */
+
+ /* Set flag to lock out other threads */
+ ced->send_chars_pending = true;
dev_dbg(&ced->interface->dev,
"Send %d chars to 1401, EP0 flag %d\n",
count, ced->n_pipes == 3);
- /* If we have only 3 end points we must send the characters to the 1401 using EP0. */
+ /* If we have only 3 end points we must send the characters */
+ /* to the 1401 using EP0. */
if (ced->n_pipes == 3) {
- /* For EP0 character transmissions to the 1401, we have to hang about until they */
- /* are gone, as otherwise without more character IO activity they will never go. */
- unsigned int i = count; /* Local char counter */
- unsigned int index = 0; /* The index into the char buffer */
+ /* For EP0 character transmissions to the 1401, we */
+ /* have to hang about until they are gone, as */
+ /* otherwise without more character IO activity */
+ /* they will never go. */
+ unsigned int i = count; /* Local char counter */
+ unsigned int index = 0; /* The index into the */
+ /* char buffer */
- spin_unlock_irq(&ced->char_out_lock); /* Free spinlock as we call USBD */
+ /* Free spinlock as we call USBD */
+ spin_unlock_irq(&ced->char_out_lock);
while ((i > 0) && (retval == U14ERR_NOERROR)) {
- /* We have to break the transfer up into 64-byte chunks because of a 2270 problem */
+ /* We have to break the transfer up into 64-byte chunks because of a 2270 problem */
int n = i > 64 ? 64 : i; /* Chars for this xfer, max of 64 */
int sent = usb_control_msg(ced->udev,
usb_sndctrlpipe(ced->udev, 0), /* use end point 0 */
n, /* how much to send */
1000); /* timeout in jiffies */
if (sent <= 0) {
- retval = sent ? sent : -ETIMEDOUT; /* if 0 chars says we timed out */
+ /* if 0 chars says we timed out */
+ retval = sent ? sent : -ETIMEDOUT;
dev_err(&ced->interface->dev,
"Send %d chars by EP0 failed: %d\n",
n, retval);
}
}
- spin_lock_irq(&ced->char_out_lock); /* Protect ced changes, released by general code */
- ced->out_buff_get = 0; /* so reset the output buffer */
+ /* Protect ced changes, released by general code */
+ spin_lock_irq(&ced->char_out_lock);
+ ced->out_buff_get = 0; /* so reset the output buffer */
ced->out_buff_put = 0;
- ced->num_output = 0; /* and clear the buffer count */
- ced->send_chars_pending = false; /* Allow other threads again */
- } else { /* Here for sending chars normally - we hold the spin lock */
+ ced->num_output = 0; /* and clear the buffer count */
+ /* Allow other threads again */
+ ced->send_chars_pending = false;
+ } else { /* Here for sending chars normally - we hold the */
+ /* spin lock */
int pipe = 0; /* The pipe number to use */
char *pDat = &ced->output_buffer[ced->out_buff_get];
- if ((ced->out_buff_get + count) > OUTBUF_SZ) /* does it cross buffer end? */
+ /* does it cross buffer end? */
+ if ((ced->out_buff_get + count) > OUTBUF_SZ)
count = OUTBUF_SZ - ced->out_buff_get;
- spin_unlock_irq(&ced->char_out_lock); /* we are done with stuff that changes */
- memcpy(ced->coher_char_out, pDat, count); /* copy output data to the buffer */
+ /* we are done with stuff that changes */
+ spin_unlock_irq(&ced->char_out_lock);
+ /* copy output data to the buffer */
+ memcpy(ced->coher_char_out, pDat, count);
usb_fill_bulk_urb(ced->urb_char_out, ced->udev,
usb_sndbulkpipe(ced->udev,
ced->ep_addr[0]),
spin_lock_irq(&ced->char_out_lock);
if (retval) {
- ced->pipe_error[pipe] = 1; /* Flag an error to be handled later */
- ced->send_chars_pending = false; /* Allow other threads again */
- usb_unanchor_urb(ced->urb_char_out); /* remove from list of active urbs */
+ /* Flag an error to be handled later */
+ ced->pipe_error[pipe] = 1;
+ /* Allow other threads again */
+ ced->send_chars_pending = false;
+ /* remove from list of active urbs */
+ usb_unanchor_urb(ced->urb_char_out);
}
}
} else if (ced->send_chars_pending && (ced->num_output > 0))
/* transfer then set the event to notify the */
/* user code to wake up anyone that is */
/* waiting. */
- if ((ta->circular) && /* Circular areas use a simpler test */
- (ta->circ_to_host)) { /* only in supported direction */
+ if ((ta->circular) && /* Circular areas use a
+ simpler test */
+ (ta->circ_to_host)) { /* only in supported
+ direction */
/* Is total data waiting up */
/* to size limit? */
unsigned int dwTotal =
(dma_desc->offset > ced->trans_def[ident].length) || /* range/size */
((dma_desc->offset +
dma_desc->size) >
- (ced->trans_def[ident].
- length))) {
- retval = false; /* bad parameter(s) */
+ (ced->trans_def[ident].length))) {
+ /* bad parameter(s) */
+ retval = false;
dev_dbg(&ced->interface->dev,
"%s: bad param - id %d, bUsed %d, offset %d, size %d, area length %d\n",
__func__, ident,
dev_err(&ced->interface->dev,
"%s: ced_read_write_mem() failed %d\n",
__func__, retval);
- } else /* This covers non-linear transfer setup */
+ } else /* This covers non-linear
+ transfer setup */
dev_err(&ced->interface->dev,
"%s: Unknown block xfer type %d\n",
__func__, trans_type);
.minor_base = USB_CED_MINOR_BASE,
};
-/* Check that the device that matches a 1401 vendor and product ID is OK to use and */
-/* initialise our struct ced_data. */
+/* Check that the device that matches a 1401 vendor and product ID is OK to */
+/* use and initialise our struct ced_data. */
static int ced_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
if (!ced)
goto error;
- for (i = 0; i < MAX_TRANSAREAS; ++i) { /* Initialise the wait queues */
+ for (i = 0; i < MAX_TRANSAREAS; ++i) { /* Initialise the wait queues */
init_waitqueue_head(&ced->trans_def[i].event);
}
- /* Put initialises for our stuff here. Note that all of *ced is zero, so */
- /* no need to explicitly zero it. */
+ /* Put initialises for our stuff here. Note that all of *ced is
+ * zero, so no need to explicitly zero it. */
spin_lock_init(&ced->char_out_lock);
spin_lock_init(&ced->char_in_lock);
spin_lock_init(&ced->staged_lock);
__func__, bcdDevice);
goto error;
}
- /* set up the endpoint information. We only care about the number of EP as */
- /* we know that we are dealing with a 1401 device. */
+ /* set up the endpoint information. We only care about the number of */
+ /* EP as we know that we are dealing with a 1401 device. */
iface_desc = interface->cur_altsetting;
ced->n_pipes = iface_desc->desc.bNumEndpoints;
dev_info(&interface->dev, "1401Type=%d with %d End Points\n",
goto error;
/* Allocate the URBs we hold for performing transfers */
- ced->urb_char_out = usb_alloc_urb(0, GFP_KERNEL); /* character output URB */
- ced->urb_char_in = usb_alloc_urb(0, GFP_KERNEL); /* character input URB */
- ced->staged_urb = usb_alloc_urb(0, GFP_KERNEL); /* block transfer URB */
+ ced->urb_char_out = usb_alloc_urb(0, GFP_KERNEL);/* character output
+ URB */
+ ced->urb_char_in = usb_alloc_urb(0, GFP_KERNEL); /* character input
+ URB */
+ ced->staged_urb = usb_alloc_urb(0, GFP_KERNEL); /* block transfer URB */
if (!ced->urb_char_out || !ced->urb_char_in || !ced->staged_urb) {
dev_err(&interface->dev, "%s: URB alloc failed\n", __func__);
goto error;
ced->ep_addr[i] = endpoint->bEndpointAddress;
dev_info(&interface->dev, "Pipe %d, ep address %02x\n",
i, ced->ep_addr[i]);
- if (((ced->n_pipes == 3) && (i == 0)) || /* if char input end point */
+
+ /* if char input end point */
+ if (((ced->n_pipes == 3) && (i == 0)) ||
((ced->n_pipes == 4) && (i == 1))) {
/* save the endpoint interrupt interval */
ced->interval = endpoint->bInterval;
i, ced->interval);
}
/* Detect USB2 by checking last ep size (64 if USB1) */
- if (i == ced->n_pipes - 1) { /* if this is the last ep (bulk) */
+ if (i == ced->n_pipes - 1) { /* if this is the last ep (bulk) */
ced->is_usb2 =
le16_to_cpu(endpoint->wMaxPacketSize) > 64;
dev_info(&ced->interface->dev, "USB%d\n",
error:
if (ced)
- kref_put(&ced->kref, ced_delete); /* frees allocated memory */
+ kref_put(&ced->kref, ced_delete); /* frees allocated memory */
return retval;
}
int minor = interface->minor;
int i;
- usb_set_intfdata(interface, NULL); /* remove the ced from the interface */
- usb_deregister_dev(interface, &ced_class); /* give back our minor device number */
+ /* remove the ced from the interface */
+ usb_set_intfdata(interface, NULL);
+ /* give back our minor device number */
+ usb_deregister_dev(interface, &ced_class);
- mutex_lock(&ced->io_mutex); /* stop more I/O starting while... */
+ mutex_lock(&ced->io_mutex); /* stop more I/O starting while... */
ced_draw_down(ced); /* ...wait for then kill any io */
for (i = 0; i < MAX_TRANSAREAS; ++i) {
- int err = ced_clear_area(ced, i); /* ...release any used memory */
+ /* ...release any used memory */
+ int err = ced_clear_area(ced, i);
if (err == U14ERR_UNLOCKFAIL)
- dev_err(&ced->interface->dev, "%s: Area %d was in used\n",
+ dev_err(&ced->interface->dev,
+ "%s: Area %d was in used\n",
__func__, i);
}
- ced->interface = NULL; /* ...we kill off link to interface */
+ ced->interface = NULL; /* ...we kill off link to interface */
mutex_unlock(&ced->io_mutex);
usb_kill_anchored_urbs(&ced->submitted);
projects / openwrt / staging / blogic.git / commitdiff