#include <asm/clock.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
+#include <asm/io_trapped.h>
static struct resource r8a66597_usb_host_resources[] = {
[0] = {
&m66592_usb_peripheral_device,
&heartbeat_device,
#ifndef CONFIG_SH_R7780RP
- &cf_ide_device,
&ax88796_device,
#endif
};
+/*
+ * The CF is connected using a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+ .resource = cf_ide_resources,
+ .num_resources = 2,
+ .minimum_bus_width = 16,
+};
+
static int __init r7780rp_devices_setup(void)
{
+#ifndef CONFIG_SH_R7780RP
+ if (register_trapped_io(&cf_trapped_io) == 0)
+ platform_device_register(&cf_ide_device);
+#endif
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
ctrl_outw(0x0001, PA_POFF);
}
-static inline unsigned char is_ide_ioaddr(unsigned long addr)
-{
- return ((cf_ide_resources[0].start <= addr &&
- addr <= cf_ide_resources[0].end) ||
- (cf_ide_resources[1].start <= addr &&
- addr <= cf_ide_resources[1].end));
-}
-
-void highlander_writeb(u8 b, void __iomem *addr)
-{
- unsigned long tmp = (unsigned long __force)addr;
-
- if (is_ide_ioaddr(tmp))
- ctrl_outw((u16)b, tmp);
- else
- ctrl_outb(b, tmp);
-}
-
-u8 highlander_readb(void __iomem *addr)
-{
- unsigned long tmp = (unsigned long __force)addr;
-
- if (is_ide_ioaddr(tmp))
- return ctrl_inw(tmp) & 0xff;
- else
- return ctrl_inb(tmp);
-}
-
/*
* Initialize the board
*/
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
- .mv_readb = highlander_readb,
- .mv_writeb = highlander_writeb,
};