ar8216: add delay for page switching to work around register setting corruption....
authorFelix Fietkau <nbd@openwrt.org>
Sun, 14 Jun 2009 03:32:01 +0000 (03:32 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 14 Jun 2009 03:32:01 +0000 (03:32 +0000)
SVN-Revision: 16442

target/linux/generic-2.6/files/drivers/net/phy/ar8216.c
target/linux/generic-2.6/files/drivers/net/phy/ar8216.h

index d83845c536dbff06af8cf4094eb9b4922cdde5b8..f629058ae033c627fdea4fcac953e31295ca95bf 100644 (file)
 #include <linux/switch.h>
 #include <linux/delay.h>
 #include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include "ar8216.h"
 
-#define AR8216_REG_PORT_RATE(_i)       (AR8216_PORT_OFFSET(_i) + 0x000c)
-#define AR8216_REG_PORT_PRIO(_i)       (AR8216_PORT_OFFSET(_i) + 0x0010)
 
 struct ar8216_priv {
+       int (*hardstart)(struct sk_buff *skb, struct net_device *dev);
+
        struct switch_dev dev;
        struct phy_device *phy;
        u32 (*read)(struct ar8216_priv *priv, int reg);
        void (*write)(struct ar8216_priv *priv, int reg, u32 val);
+
        /* all fields below are cleared on reset */
        bool vlan;
        u8 vlan_id[AR8216_NUM_VLANS];
@@ -70,6 +73,7 @@ ar8216_mii_read(struct ar8216_priv *priv, int reg)
 
        split_addr((u32) reg, &r1, &r2, &page);
        phy->bus->write(phy->bus, 0x18, 0, page);
+       msleep(1); /* wait for the page switch to propagate */
        lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
        hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
 
@@ -85,6 +89,7 @@ ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
 
        split_addr((u32) reg, &r1, &r2, &r3);
        phy->bus->write(phy->bus, 0x18, 0, r3);
+       msleep(1); /* wait for the page switch to propagate */
 
        lo = val & 0xffff;
        hi = (u16) (val >> 16);
@@ -159,6 +164,103 @@ ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
 }
 
 
+static int
+ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
+{
+       struct ar8216_priv *priv = dev->phy_ptr;
+       unsigned char *buf;
+
+    if (unlikely(!priv))
+        goto error;
+
+       if (!priv->vlan)
+               goto send;
+
+       if (unlikely(skb_headroom(skb) < 2)) {
+               if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
+                       goto error;
+       }
+
+       buf = skb_push(skb, 2);
+       buf[0] = 0x10;
+       buf[1] = 0x80;
+
+send:
+       return priv->hardstart(skb, dev);
+
+error:
+       dev_kfree_skb_any(skb);
+       return 0;
+}
+
+static int
+ar8216_mangle_rx(struct sk_buff *skb, int napi)
+{
+       struct ar8216_priv *priv;
+       struct net_device *dev;
+       unsigned char *buf;
+       int port, vlan;
+
+       dev = skb->dev;
+       if (!dev)
+               goto error;
+
+       priv = dev->phy_ptr;
+       if (!priv)
+               goto error;
+
+       /* don't strip the header if vlan mode is disabled */
+       if (!priv->vlan)
+               goto recv;
+
+       /* strip header, get vlan id */
+       buf = skb->data;
+       skb_pull(skb, 2);
+
+       /* check for vlan header presence */
+       if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
+               goto recv;
+
+       port = buf[0] & 0xf;
+
+       /* no need to fix up packets coming from a tagged source */
+       if (priv->vlan_tagged & (1 << port))
+               goto recv;
+
+       /* lookup port vid from local table, the switch passes an invalid vlan id */
+       vlan = priv->pvid[port];
+
+       buf[14 + 2] &= 0xf0;
+       buf[14 + 2] |= vlan >> 8;
+       buf[15 + 2] = vlan & 0xff;
+
+recv:
+       skb->protocol = eth_type_trans(skb, skb->dev);
+
+       if (napi)
+               return netif_receive_skb(skb);
+       else
+               return netif_rx(skb);
+
+error:
+       /* no vlan? eat the packet! */
+       dev_kfree_skb_any(skb);
+       return 0;
+}
+
+static int
+ar8216_netif_rx(struct sk_buff *skb)
+{
+       return ar8216_mangle_rx(skb, 0);
+}
+
+static int
+ar8216_netif_receive_skb(struct sk_buff *skb)
+{
+       return ar8216_mangle_rx(skb, 1);
+}
+
+
 static struct switch_attr ar8216_globals[] = {
        {
                .type = SWITCH_TYPE_INT,
@@ -327,19 +429,18 @@ ar8216_hw_apply(struct switch_dev *dev)
 
                if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
                        egress = AR8216_OUT_ADD_VLAN;
-                       ingress = AR8216_IN_PORT_FALLBACK;
                } else {
                        egress = AR8216_OUT_STRIP_VLAN;
-                       ingress = AR8216_IN_SECURE;
                }
+               ingress = AR8216_IN_SECURE;
 
                ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
                        AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
                        AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
                        AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
                        AR8216_PORT_CTRL_LEARN |
+                         (i == AR8216_PORT_CPU ? AR8216_PORT_CTRL_HEADER : 0) |
                          (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
-                         (priv->vlan ? AR8216_PORT_CTRL_SINGLE_VLAN : 0) |
                          (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
 
                ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
@@ -394,6 +495,7 @@ static int
 ar8216_config_init(struct phy_device *pdev)
 {
        struct ar8216_priv *priv;
+       struct net_device *dev = pdev->attached_dev;
        int ret;
 
        printk("%s: AR8216 PHY driver attached.\n", pdev->attached_dev->name);
@@ -415,6 +517,16 @@ ar8216_config_init(struct phy_device *pdev)
        }
 
        ret = ar8216_reset_switch(&priv->dev);
+       if (ret)
+               goto done;
+
+       dev->phy_ptr = priv;
+       pdev->pkt_align = 2;
+       priv->hardstart = dev->hard_start_xmit;
+       pdev->netif_receive_skb = ar8216_netif_receive_skb;
+       pdev->netif_rx = ar8216_netif_rx;
+       dev->hard_start_xmit = ar8216_mangle_tx;
+
 done:
        return ret;
 }
@@ -465,10 +577,13 @@ static void
 ar8216_remove(struct phy_device *pdev)
 {
        struct ar8216_priv *priv = pdev->priv;
+       struct net_device *dev = pdev->attached_dev;
 
        if (!priv)
                return;
 
+       if (priv->hardstart && dev)
+               dev->hard_start_xmit = priv->hardstart;
        unregister_switch(&priv->dev);
        kfree(priv);
 }
index a729ac4425a4815030ace1e24c404786d4b97dfd..e0f0452cb8c3ac84ac73e5b24d78d161d4280232 100644 (file)
 #define   AR8216_PORT_VLAN_MODE                BITS(30, 2)
 #define   AR8216_PORT_VLAN_MODE_S      30
 
+#define AR8216_REG_PORT_RATE(_i)       (AR8216_PORT_OFFSET(_i) + 0x000c)
+#define AR8216_REG_PORT_PRIO(_i)       (AR8216_PORT_OFFSET(_i) + 0x0010)
+
 /* ingress 802.1q mode */
 enum {
        AR8216_IN_PORT_ONLY = 0,