/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
&wmac {
status = "okay";
- mtd-cal-data = <&eeprom 0x1000>;
+ mtd-cal-data = <&art 0x1000>;
};
read-only;
};
- eeprom: partition@ff0000 {
- label = "EEPROM";
+ art: partition@ff0000 {
+ label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
status = "okay";
qca,disable-5ghz;
- mtd-cal-data = <&eeprom 0x1000>;
+ mtd-cal-data = <&art 0x1000>;
};
read-only;
};
- eeprom: partition@7f0000 {
- label = "EEPROM";
+ art: partition@7f0000 {
+ label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
&wmac {
status = "okay";
- mtd-cal-data = <&eeprom 0x1000>;
+ mtd-cal-data = <&art 0x1000>;
};
ð0 {
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
};
read-only;
};
- eeprom: partition@ff0000 {
- label = "EEPROM";
+ art: partition@ff0000 {
+ label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
ð0 {
status = "okay";
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-handle = <&swphy4>;
};
ð1 {
status = "okay";
- mtd-mac-address = <&eeprom 0x6>;
+ mtd-mac-address = <&art 0x6>;
gmac-config {
device = <&gmac>;
&wmac {
status = "okay";
- mtd-cal-data = <&eeprom 0x1000>;
+ mtd-cal-data = <&art 0x1000>;
};
ð0 {
status = "okay";
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-handle = <&phy4>;
};
ð0 {
status = "okay";
- mtd-mac-address = <&eeprom 0x0>;
+ mtd-mac-address = <&art 0x0>;
phy-handle = <&phy0>;
};
read-only;
};
- eeprom: partition@ff0000 {
- label = "EEPROM";
+ art: partition@ff0000 {
+ label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
&wmac {
status = "okay";
- mtd-cal-data = <&eeprom 0x1000>;
+ mtd-cal-data = <&art 0x1000>;
};
case $board in
comfast,cf-wr650ac-v1|\
comfast,cf-wr650ac-v2|\
+ ubnt,unifiac-lite|\
+ ubnt,unifiac-lr|\
+ ubnt,unifiac-mesh|\
+ ubnt,unifiac-mesh-pro|\
+ ubnt,lap-120|\
+ ubnt,nanobeam-ac|\
+ ubnt,nanostation-ac|\
+ ubnt,nanostation-ac-loco|\
+ ubnt,unifiac-pro|\
yuncore,a770)
caldata_extract "art" 0x5000 0x844
;;
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
- ubnt,unifiac-lite|\
- ubnt,unifiac-lr|\
- ubnt,unifiac-mesh|\
- ubnt,unifiac-mesh-pro|\
- ubnt,lap-120|\
- ubnt,nanobeam-ac|\
- ubnt,nanostation-ac|\
- ubnt,nanostation-ac-loco|\
- ubnt,unifiac-pro)
- caldata_extract "EEPROM" 0x5000 0x844
- ;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")