rockchip: add NanoPi R5S support
authorTianling Shen <cnsztl@immortalwrt.org>
Sun, 25 Jun 2023 16:37:30 +0000 (00:37 +0800)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 26 Nov 2023 18:44:56 +0000 (19:44 +0100)
Hardware
--------
RockChip RK3568 ARM64 (4 cores)
2GB or 4GB LPDDR4X RAM
1x 1000 Base-T
2x 2500 Base-T
4 LEDs (LAN1 / LAN2 / WAN / POWER)
8GB eMMC on-board
Micro-SD Slot
M.2 Slot
2x USB 3.0 Port

Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.

Tested-by: Packet Please <pktpls@systemli.org>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
target/linux/rockchip/armv8/base-files/etc/board.d/01_leds
target/linux/rockchip/armv8/base-files/etc/board.d/02_network
target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity
target/linux/rockchip/image/armv8.mk
target/linux/rockchip/patches-6.1/009-v6.4-arm64-dts-rockchip-Add-FriendlyElec-Nanopi-R5S.patch [new file with mode: 0644]
target/linux/rockchip/patches-6.1/010-v6.4-arm64-dts-rockchip-create-common-dtsi-for-NanoPi-R5-serie.patch [new file with mode: 0644]
target/linux/rockchip/patches-6.1/011-v6.4-arm64-dts-rockchip-fix-gmac-support-for-NanoPi-R5S.patch [new file with mode: 0644]
target/linux/rockchip/patches-6.1/012-v6.4-arm64-dts-rockchip-remove-I2S1-TDM-node-for-the-NanoPi-R5.patch [new file with mode: 0644]
target/linux/rockchip/patches-6.1/110-arm64-dts-rockchip-Update-LED-properties-for-NanoPi-.patch [new file with mode: 0644]

index d82e47cf538f54cd5e484c6fb6a92aa7811d8def..cfab545849420365e9726b6d0de0713250b19473 100644 (file)
@@ -16,6 +16,11 @@ xunlong,orangepi-r1-plus-lts)
        ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
        ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth1"
        ;;
+friendlyarm,nanopi-r5s)
+       ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+       ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth1"
+       ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth2"
+       ;;
 esac
 
 board_config_flush
index 7ac5148275a4d7faace6a3f2bf8ea0bb64442fde..838a107193b60ff837bdb8bd03ec24e6b98a9941 100644 (file)
@@ -14,6 +14,9 @@ rockchip_setup_interfaces()
        xunlong,orangepi-r1-plus-lts)
                ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
                ;;
+       friendlyarm,nanopi-r5s)
+               ucidef_set_interfaces_lan_wan 'eth1 eth2' 'eth0'
+               ;;
        *)
                ucidef_set_interface_lan 'eth0'
                ;;
@@ -58,6 +61,10 @@ rockchip_setup_macs()
                wan_mac=$(nanopi_r4s_get_mac wan)
                lan_mac=$(nanopi_r4s_get_mac lan)
                ;;
+       friendlyarm,nanopi-r5s)
+               wan_mac=$(macaddr_generate_from_mmc_cid mmcblk1)
+               lan_mac=$(macaddr_add "$wan_mac" 1)
+               ;;
        xunlong,orangepi-r1-plus|\
        xunlong,orangepi-r1-plus-lts)
                wan_mac=$(macaddr_add "$(cat /sys/class/net/eth1/address)" -1)
index bb119b9185ebabe3dfb92f720e5a6ab98eb6b7e2..161059a87bec2feb99c1f610d5642d52883f7b33 100644 (file)
@@ -40,5 +40,10 @@ friendlyarm,nanopi-r4s)
        set_interface_core 10 "eth0"
        set_interface_core 20 "eth1"
        ;;
+friendlyarm,nanopi-r5s)
+       set_interface_core 2 "eth0"
+       set_interface_core 4 "eth1"
+       set_interface_core 8 "eth2"
+       ;;
 esac
 
index 608ad79ca498416c13465bc3389e2ff89acfefeb..e836e3c91d5d43138f178b19f4f233fab4d3a339 100644 (file)
@@ -47,6 +47,14 @@ define Device/friendlyarm_nanopi-r4s
 endef
 TARGET_DEVICES += friendlyarm_nanopi-r4s
 
+define Device/friendlyarm_nanopi-r5s
+  DEVICE_VENDOR := FriendlyARM
+  DEVICE_MODEL := NanoPi R5S
+  SOC := rk3568
+  DEVICE_PACKAGES := kmod-r8169
+endef
+TARGET_DEVICES += friendlyarm_nanopi-r5s
+
 define Device/pine64_rock64
   DEVICE_VENDOR := Pine64
   DEVICE_MODEL := Rock64
diff --git a/target/linux/rockchip/patches-6.1/009-v6.4-arm64-dts-rockchip-Add-FriendlyElec-Nanopi-R5S.patch b/target/linux/rockchip/patches-6.1/009-v6.4-arm64-dts-rockchip-Add-FriendlyElec-Nanopi-R5S.patch
new file mode 100644 (file)
index 0000000..3d502a6
--- /dev/null
@@ -0,0 +1,754 @@
+From c6629b9a6738a64507478527da6c7b83c10a6d2c Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Tue, 7 Mar 2023 22:32:40 -0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyElec Nanopi R5S
+
+FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
+
+Board Specifications
+- Rockchip RK3568
+- 2 or 4GB LPDDR4X
+- 8GB or 16GB eMMC, SD card slot
+- GbE LAN (Native)
+- 2x 2.5G LAN (PCIe)
+- M.2 Connector
+- HDMI 2.0, MIPI DSI/CSI
+- 2xUSB 3.0 Host
+- USB Type C PD, 5V/9V/12V
+- GPIO: 12-pin 0.5mm FPC connector
+
+Based on Tianling Shen's <cnsztl@gmail.com> work.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile         |   1 +
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dts   | 713 ++++++++++++++++++
+ 2 files changed, 714 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -74,4 +74,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -0,0 +1,713 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++      model = "FriendlyElec NanoPi R5S";
++      compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
++
++      aliases {
++              ethernet0 = &gmac0;
++              mmc0 = &sdmmc0;
++              mmc1 = &sdhci;
++      };
++
++      chosen: chosen {
++              stdout-path = "serial2:1500000n8";
++      };
++
++      hdmi-con {
++              compatible = "hdmi-connector";
++              type = "a";
++
++              port {
++                      hdmi_con_in: endpoint {
++                              remote-endpoint = <&hdmi_out_con>;
++                      };
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++              pinctrl-names = "default";
++              pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
++
++              led-lan1 {
++                      color = <LED_COLOR_ID_GREEN>;
++                      function = LED_FUNCTION_LAN;
++                      function-enumerator = <1>;
++                      gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
++              };
++
++              led-lan2 {
++                      color = <LED_COLOR_ID_GREEN>;
++                      function = LED_FUNCTION_LAN;
++                      function-enumerator = <2>;
++                      gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
++              };
++
++              power_led: led-power {
++                      color = <LED_COLOR_ID_RED>;
++                      function = LED_FUNCTION_POWER;
++                      linux,default-trigger = "heartbeat";
++                      gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
++              };
++
++              led-wan {
++                      color = <LED_COLOR_ID_GREEN>;
++                      function = LED_FUNCTION_WAN;
++                      gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
++              };
++      };
++
++      vdd_usbc: vdd-usbc-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vdd_usbc";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++      };
++
++      vcc3v3_sys: vcc3v3-sys-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc3v3_sys";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              vin-supply = <&vdd_usbc>;
++      };
++
++      vcc5v0_sys: vcc5v0-sys-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc5v0_sys";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vdd_usbc>;
++      };
++
++      vcc3v3_pcie: vcc3v3-pcie-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc3v3_pcie";
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              enable-active-high;
++              gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
++              startup-delay-us = <200000>;
++              vin-supply = <&vcc5v0_sys>;
++      };
++
++      vcc5v0_usb: vcc5v0-usb-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc5v0_usb";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vdd_usbc>;
++      };
++
++      vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++              compatible = "regulator-fixed";
++              enable-active-high;
++              gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++              pinctrl-names = "default";
++              pinctrl-0 = <&vcc5v0_usb_host_en>;
++              regulator-name = "vcc5v0_usb_host";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vcc5v0_usb>;
++      };
++
++      vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++              compatible = "regulator-fixed";
++              enable-active-high;
++              gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++              pinctrl-names = "default";
++              pinctrl-0 = <&vcc5v0_usb_otg_en>;
++              regulator-name = "vcc5v0_usb_otg";
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vcc5v0_usb>;
++      };
++
++      pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "pcie30_avdd0v9";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <900000>;
++              regulator-max-microvolt = <900000>;
++              vin-supply = <&vcc3v3_sys>;
++      };
++
++      pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "pcie30_avdd1v8";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <1800000>;
++              regulator-max-microvolt = <1800000>;
++              vin-supply = <&vcc3v3_sys>;
++      };
++};
++
++&combphy0 {
++      status = "okay";
++};
++
++&combphy1 {
++      status = "okay";
++};
++
++&combphy2 {
++      status = "okay";
++};
++
++&cpu0 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&gmac0 {
++      assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
++      assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
++      assigned-clock-rates = <0>, <125000000>;
++      clock_in_out = "output";
++      phy-handle = <&rgmii_phy0>;
++      phy-mode = "rgmii-id";
++      pinctrl-names = "default";
++      pinctrl-0 = <&gmac0_miim
++                   &gmac0_tx_bus2
++                   &gmac0_rx_bus2
++                   &gmac0_rgmii_clk
++                   &gmac0_rgmii_bus>;
++      snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
++      snps,reset-active-low;
++      /* Reset time is 15ms, 50ms for rtl8211f */
++      snps,reset-delays-us = <0 15000 50000>;
++      tx_delay = <0x3c>;
++      rx_delay = <0x2f>;
++      status = "okay";
++};
++
++&gpu {
++      mali-supply = <&vdd_gpu>;
++      status = "okay";
++};
++
++&hdmi {
++      avdd-0v9-supply = <&vdda0v9_image>;
++      avdd-1v8-supply = <&vcca1v8_image>;
++      status = "okay";
++};
++
++&hdmi_in {
++      hdmi_in_vp0: endpoint {
++              remote-endpoint = <&vp0_out_hdmi>;
++      };
++};
++
++&hdmi_out {
++      hdmi_out_con: endpoint {
++              remote-endpoint = <&hdmi_con_in>;
++      };
++};
++
++&hdmi_sound {
++      status = "okay";
++};
++
++&i2c0 {
++      status = "okay";
++
++      vdd_cpu: regulator@1c {
++              compatible = "tcs,tcs4525";
++              reg = <0x1c>;
++              fcs,suspend-voltage-selector = <1>;
++              regulator-name = "vdd_cpu";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <800000>;
++              regulator-max-microvolt = <1150000>;
++              regulator-ramp-delay = <2300>;
++              vin-supply = <&vcc5v0_sys>;
++
++              regulator-state-mem {
++                      regulator-off-in-suspend;
++              };
++      };
++
++      rk809: pmic@20 {
++              compatible = "rockchip,rk809";
++              reg = <0x20>;
++              interrupt-parent = <&gpio0>;
++              interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++              #clock-cells = <1>;
++              pinctrl-names = "default";
++              pinctrl-0 = <&pmic_int>;
++              rockchip,system-power-controller;
++              vcc1-supply = <&vcc3v3_sys>;
++              vcc2-supply = <&vcc3v3_sys>;
++              vcc3-supply = <&vcc3v3_sys>;
++              vcc4-supply = <&vcc3v3_sys>;
++              vcc5-supply = <&vcc3v3_sys>;
++              vcc6-supply = <&vcc3v3_sys>;
++              vcc7-supply = <&vcc3v3_sys>;
++              vcc8-supply = <&vcc3v3_sys>;
++              vcc9-supply = <&vcc3v3_sys>;
++              wakeup-source;
++
++              regulators {
++                      vdd_logic: DCDC_REG1 {
++                              regulator-name = "vdd_logic";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-init-microvolt = <900000>;
++                              regulator-initial-mode = <0x2>;
++                              regulator-min-microvolt = <500000>;
++                              regulator-max-microvolt = <1350000>;
++                              regulator-ramp-delay = <6001>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdd_gpu: DCDC_REG2 {
++                              regulator-name = "vdd_gpu";
++                              regulator-always-on;
++                              regulator-init-microvolt = <900000>;
++                              regulator-initial-mode = <0x2>;
++                              regulator-min-microvolt = <500000>;
++                              regulator-max-microvolt = <1350000>;
++                              regulator-ramp-delay = <6001>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc_ddr: DCDC_REG3 {
++                              regulator-name = "vcc_ddr";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-initial-mode = <0x2>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                              };
++                      };
++
++                      vdd_npu: DCDC_REG4 {
++                              regulator-name = "vdd_npu";
++                              regulator-init-microvolt = <900000>;
++                              regulator-initial-mode = <0x2>;
++                              regulator-min-microvolt = <500000>;
++                              regulator-max-microvolt = <1350000>;
++                              regulator-ramp-delay = <6001>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc_1v8: DCDC_REG5 {
++                              regulator-name = "vcc_1v8";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdda0v9_image: LDO_REG1 {
++                              regulator-name = "vdda0v9_image";
++                              regulator-min-microvolt = <950000>;
++                              regulator-max-microvolt = <950000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdda_0v9: LDO_REG2 {
++                              regulator-name = "vdda_0v9";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <900000>;
++                              regulator-max-microvolt = <900000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdda0v9_pmu: LDO_REG3 {
++                              regulator-name = "vdda0v9_pmu";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <900000>;
++                              regulator-max-microvolt = <900000>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                                      regulator-suspend-microvolt = <900000>;
++                              };
++                      };
++
++                      vccio_acodec: LDO_REG4 {
++                              regulator-name = "vccio_acodec";
++                              regulator-always-on;
++                              regulator-min-microvolt = <3300000>;
++                              regulator-max-microvolt = <3300000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vccio_sd: LDO_REG5 {
++                              regulator-name = "vccio_sd";
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <3300000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc3v3_pmu: LDO_REG6 {
++                              regulator-name = "vcc3v3_pmu";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <3300000>;
++                              regulator-max-microvolt = <3300000>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                                      regulator-suspend-microvolt = <3300000>;
++                              };
++                      };
++
++                      vcca_1v8: LDO_REG7 {
++                              regulator-name = "vcca_1v8";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcca1v8_pmu: LDO_REG8 {
++                              regulator-name = "vcca1v8_pmu";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                                      regulator-suspend-microvolt = <1800000>;
++                              };
++                      };
++
++                      vcca1v8_image: LDO_REG9 {
++                              regulator-name = "vcca1v8_image";
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc_3v3: SWITCH_REG1 {
++                              regulator-name = "vcc_3v3";
++                              regulator-always-on;
++                              regulator-boot-on;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc3v3_sd: SWITCH_REG2 {
++                              regulator-name = "vcc3v3_sd";
++                              regulator-always-on;
++                              regulator-boot-on;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++              };
++
++      };
++};
++
++&i2c5 {
++      status = "okay";
++
++      hym8563: rtc@51 {
++              compatible = "haoyu,hym8563";
++              reg = <0x51>;
++              interrupt-parent = <&gpio0>;
++              interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++              #clock-cells = <0>;
++              clock-output-names = "rtcic_32kout";
++              pinctrl-names = "default";
++              pinctrl-0 = <&hym8563_int>;
++              wakeup-source;
++      };
++};
++
++&i2s0_8ch {
++      status = "okay";
++};
++
++&i2s1_8ch {
++      rockchip,trcm-sync-tx-only;
++      status = "okay";
++};
++
++&mdio0 {
++      rgmii_phy0: ethernet-phy@1 {
++              compatible = "ethernet-phy-ieee802.3-c22";
++              reg = <1>;
++              pinctrl-0 = <&eth_phy0_reset_pin>;
++              pinctrl-names = "default";
++              reset-assert-us = <10000>;
++              reset-deassert-us = <50000>;
++              reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
++      };
++};
++
++&pcie2x1 {
++      num-lanes = <1>;
++      reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
++      status = "okay";
++};
++
++&pcie30phy {
++      data-lanes = <1 2>;
++      status = "okay";
++};
++
++&pcie3x1 {
++      num-lanes = <1>;
++      reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++      vpcie3v3-supply = <&vcc3v3_pcie>;
++      status = "okay";
++};
++
++&pcie3x2 {
++      num-lanes = <1>;
++      num-ib-windows = <8>;
++      num-ob-windows = <8>;
++      reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++      vpcie3v3-supply = <&vcc3v3_pcie>;
++      status = "okay";
++};
++
++&pinctrl {
++      gmac0 {
++              eth_phy0_reset_pin: eth-phy0-reset-pin {
++                      rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
++              };
++      };
++
++      gpio-leds {
++              lan1_led_pin: lan1-led-pin {
++                      rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++
++              lan2_led_pin: lan2-led-pin {
++                      rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++
++              power_led_pin: power-led-pin {
++                      rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++
++              wan_led_pin: wan-led-pin {
++                      rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++      };
++
++      hym8563 {
++              hym8563_int: hym8563-int {
++                      rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++              };
++      };
++
++      pmic {
++              pmic_int: pmic-int {
++                      rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++              };
++      };
++
++      usb {
++              vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++                      rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++
++              vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++                      rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++      };
++};
++
++&pmu_io_domains {
++      pmuio1-supply = <&vcc3v3_pmu>;
++      pmuio2-supply = <&vcc3v3_pmu>;
++      vccio1-supply = <&vccio_acodec>;
++      vccio3-supply = <&vccio_sd>;
++      vccio4-supply = <&vcc_1v8>;
++      vccio5-supply = <&vcc_3v3>;
++      vccio6-supply = <&vcc_1v8>;
++      vccio7-supply = <&vcc_3v3>;
++      status = "okay";
++};
++
++&saradc {
++      vref-supply = <&vcca_1v8>;
++      status = "okay";
++};
++
++&sdhci {
++      bus-width = <8>;
++      max-frequency = <200000000>;
++      non-removable;
++      pinctrl-names = "default";
++      pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
++      status = "okay";
++};
++
++&sdmmc0 {
++      max-frequency = <150000000>;
++      no-sdio;
++      no-mmc;
++      bus-width = <4>;
++      cap-mmc-highspeed;
++      cap-sd-highspeed;
++      disable-wp;
++      vmmc-supply = <&vcc3v3_sd>;
++      vqmmc-supply = <&vccio_sd>;
++      pinctrl-names = "default";
++      pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++      status = "okay";
++};
++
++&tsadc {
++      rockchip,hw-tshut-mode = <1>;
++      rockchip,hw-tshut-polarity = <0>;
++      status = "okay";
++};
++
++&uart2 {
++      status = "okay";
++};
++
++&usb_host0_ehci {
++      status = "okay";
++};
++
++&usb_host0_ohci {
++      status = "okay";
++};
++
++&usb_host0_xhci {
++      extcon = <&usb2phy0>;
++      dr_mode = "host";
++      status = "okay";
++};
++
++&usb_host1_ehci {
++      status = "okay";
++};
++
++&usb_host1_ohci {
++      status = "okay";
++};
++
++&usb_host1_xhci {
++      status = "okay";
++};
++
++&usb2phy0 {
++      status = "okay";
++};
++
++&usb2phy0_host {
++      phy-supply = <&vcc5v0_usb_host>;
++      status = "okay";
++};
++
++&usb2phy0_otg {
++      status = "okay";
++};
++
++&usb2phy1 {
++      status = "okay";
++};
++
++&usb2phy1_host {
++      phy-supply = <&vcc5v0_usb_otg>;
++      status = "okay";
++};
++
++&usb2phy1_otg {
++      status = "okay";
++};
++
++&vop {
++      assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++      assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++      status = "okay";
++};
++
++&vop_mmu {
++      status = "okay";
++};
++
++&vp0 {
++      vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++              reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++              remote-endpoint = <&hdmi_in_vp0>;
++      };
++};
diff --git a/target/linux/rockchip/patches-6.1/010-v6.4-arm64-dts-rockchip-create-common-dtsi-for-NanoPi-R5-serie.patch b/target/linux/rockchip/patches-6.1/010-v6.4-arm64-dts-rockchip-create-common-dtsi-for-NanoPi-R5-serie.patch
new file mode 100644 (file)
index 0000000..cf9fe06
--- /dev/null
@@ -0,0 +1,1226 @@
+From c8ec73b05a95d9f0969ae0f28dd8799a54fcdfc7 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:41 +0800
+Subject: [PATCH] arm64: dts: rockchip: create common dtsi for NanoPi R5 series
+
+Create common dtsi for the FriendlyElec NanoPi R5 series.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-2-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dts   | 575 +----------------
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dtsi  | 596 ++++++++++++++++++
+ 2 files changed, 597 insertions(+), 574 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -7,12 +7,7 @@
+  */
+ /dts-v1/;
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include <dt-bindings/leds/common.h>
+-#include <dt-bindings/pinctrl/rockchip.h>
+-#include <dt-bindings/soc/rockchip,vop2.h>
+-#include "rk3568.dtsi"
++#include "rk3568-nanopi-r5s.dtsi"
+ / {
+       model = "FriendlyElec NanoPi R5S";
+@@ -20,23 +15,6 @@
+       aliases {
+               ethernet0 = &gmac0;
+-              mmc0 = &sdmmc0;
+-              mmc1 = &sdhci;
+-      };
+-
+-      chosen: chosen {
+-              stdout-path = "serial2:1500000n8";
+-      };
+-
+-      hdmi-con {
+-              compatible = "hdmi-connector";
+-              type = "a";
+-
+-              port {
+-                      hdmi_con_in: endpoint {
+-                              remote-endpoint = <&hdmi_out_con>;
+-                      };
+-              };
+       };
+       gpio-leds {
+@@ -71,130 +49,6 @@
+                       gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+               };
+       };
+-
+-      vdd_usbc: vdd-usbc-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "vdd_usbc";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <5000000>;
+-              regulator-max-microvolt = <5000000>;
+-      };
+-
+-      vcc3v3_sys: vcc3v3-sys-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "vcc3v3_sys";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <3300000>;
+-              regulator-max-microvolt = <3300000>;
+-              vin-supply = <&vdd_usbc>;
+-      };
+-
+-      vcc5v0_sys: vcc5v0-sys-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "vcc5v0_sys";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <5000000>;
+-              regulator-max-microvolt = <5000000>;
+-              vin-supply = <&vdd_usbc>;
+-      };
+-
+-      vcc3v3_pcie: vcc3v3-pcie-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "vcc3v3_pcie";
+-              regulator-min-microvolt = <3300000>;
+-              regulator-max-microvolt = <3300000>;
+-              enable-active-high;
+-              gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+-              startup-delay-us = <200000>;
+-              vin-supply = <&vcc5v0_sys>;
+-      };
+-
+-      vcc5v0_usb: vcc5v0-usb-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "vcc5v0_usb";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <5000000>;
+-              regulator-max-microvolt = <5000000>;
+-              vin-supply = <&vdd_usbc>;
+-      };
+-
+-      vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+-              compatible = "regulator-fixed";
+-              enable-active-high;
+-              gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+-              pinctrl-names = "default";
+-              pinctrl-0 = <&vcc5v0_usb_host_en>;
+-              regulator-name = "vcc5v0_usb_host";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <5000000>;
+-              regulator-max-microvolt = <5000000>;
+-              vin-supply = <&vcc5v0_usb>;
+-      };
+-
+-      vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+-              compatible = "regulator-fixed";
+-              enable-active-high;
+-              gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+-              pinctrl-names = "default";
+-              pinctrl-0 = <&vcc5v0_usb_otg_en>;
+-              regulator-name = "vcc5v0_usb_otg";
+-              regulator-min-microvolt = <5000000>;
+-              regulator-max-microvolt = <5000000>;
+-              vin-supply = <&vcc5v0_usb>;
+-      };
+-
+-      pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "pcie30_avdd0v9";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <900000>;
+-              regulator-max-microvolt = <900000>;
+-              vin-supply = <&vcc3v3_sys>;
+-      };
+-
+-      pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+-              compatible = "regulator-fixed";
+-              regulator-name = "pcie30_avdd1v8";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <1800000>;
+-              regulator-max-microvolt = <1800000>;
+-              vin-supply = <&vcc3v3_sys>;
+-      };
+-};
+-
+-&combphy0 {
+-      status = "okay";
+-};
+-
+-&combphy1 {
+-      status = "okay";
+-};
+-
+-&combphy2 {
+-      status = "okay";
+-};
+-
+-&cpu0 {
+-      cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu1 {
+-      cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu2 {
+-      cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu3 {
+-      cpu-supply = <&vdd_cpu>;
+ };
+ &gmac0 {
+@@ -219,292 +73,6 @@
+       status = "okay";
+ };
+-&gpu {
+-      mali-supply = <&vdd_gpu>;
+-      status = "okay";
+-};
+-
+-&hdmi {
+-      avdd-0v9-supply = <&vdda0v9_image>;
+-      avdd-1v8-supply = <&vcca1v8_image>;
+-      status = "okay";
+-};
+-
+-&hdmi_in {
+-      hdmi_in_vp0: endpoint {
+-              remote-endpoint = <&vp0_out_hdmi>;
+-      };
+-};
+-
+-&hdmi_out {
+-      hdmi_out_con: endpoint {
+-              remote-endpoint = <&hdmi_con_in>;
+-      };
+-};
+-
+-&hdmi_sound {
+-      status = "okay";
+-};
+-
+-&i2c0 {
+-      status = "okay";
+-
+-      vdd_cpu: regulator@1c {
+-              compatible = "tcs,tcs4525";
+-              reg = <0x1c>;
+-              fcs,suspend-voltage-selector = <1>;
+-              regulator-name = "vdd_cpu";
+-              regulator-always-on;
+-              regulator-boot-on;
+-              regulator-min-microvolt = <800000>;
+-              regulator-max-microvolt = <1150000>;
+-              regulator-ramp-delay = <2300>;
+-              vin-supply = <&vcc5v0_sys>;
+-
+-              regulator-state-mem {
+-                      regulator-off-in-suspend;
+-              };
+-      };
+-
+-      rk809: pmic@20 {
+-              compatible = "rockchip,rk809";
+-              reg = <0x20>;
+-              interrupt-parent = <&gpio0>;
+-              interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+-              #clock-cells = <1>;
+-              pinctrl-names = "default";
+-              pinctrl-0 = <&pmic_int>;
+-              rockchip,system-power-controller;
+-              vcc1-supply = <&vcc3v3_sys>;
+-              vcc2-supply = <&vcc3v3_sys>;
+-              vcc3-supply = <&vcc3v3_sys>;
+-              vcc4-supply = <&vcc3v3_sys>;
+-              vcc5-supply = <&vcc3v3_sys>;
+-              vcc6-supply = <&vcc3v3_sys>;
+-              vcc7-supply = <&vcc3v3_sys>;
+-              vcc8-supply = <&vcc3v3_sys>;
+-              vcc9-supply = <&vcc3v3_sys>;
+-              wakeup-source;
+-
+-              regulators {
+-                      vdd_logic: DCDC_REG1 {
+-                              regulator-name = "vdd_logic";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-init-microvolt = <900000>;
+-                              regulator-initial-mode = <0x2>;
+-                              regulator-min-microvolt = <500000>;
+-                              regulator-max-microvolt = <1350000>;
+-                              regulator-ramp-delay = <6001>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vdd_gpu: DCDC_REG2 {
+-                              regulator-name = "vdd_gpu";
+-                              regulator-always-on;
+-                              regulator-init-microvolt = <900000>;
+-                              regulator-initial-mode = <0x2>;
+-                              regulator-min-microvolt = <500000>;
+-                              regulator-max-microvolt = <1350000>;
+-                              regulator-ramp-delay = <6001>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vcc_ddr: DCDC_REG3 {
+-                              regulator-name = "vcc_ddr";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-initial-mode = <0x2>;
+-
+-                              regulator-state-mem {
+-                                      regulator-on-in-suspend;
+-                              };
+-                      };
+-
+-                      vdd_npu: DCDC_REG4 {
+-                              regulator-name = "vdd_npu";
+-                              regulator-init-microvolt = <900000>;
+-                              regulator-initial-mode = <0x2>;
+-                              regulator-min-microvolt = <500000>;
+-                              regulator-max-microvolt = <1350000>;
+-                              regulator-ramp-delay = <6001>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vcc_1v8: DCDC_REG5 {
+-                              regulator-name = "vcc_1v8";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-min-microvolt = <1800000>;
+-                              regulator-max-microvolt = <1800000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vdda0v9_image: LDO_REG1 {
+-                              regulator-name = "vdda0v9_image";
+-                              regulator-min-microvolt = <950000>;
+-                              regulator-max-microvolt = <950000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vdda_0v9: LDO_REG2 {
+-                              regulator-name = "vdda_0v9";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-min-microvolt = <900000>;
+-                              regulator-max-microvolt = <900000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vdda0v9_pmu: LDO_REG3 {
+-                              regulator-name = "vdda0v9_pmu";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-min-microvolt = <900000>;
+-                              regulator-max-microvolt = <900000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-on-in-suspend;
+-                                      regulator-suspend-microvolt = <900000>;
+-                              };
+-                      };
+-
+-                      vccio_acodec: LDO_REG4 {
+-                              regulator-name = "vccio_acodec";
+-                              regulator-always-on;
+-                              regulator-min-microvolt = <3300000>;
+-                              regulator-max-microvolt = <3300000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vccio_sd: LDO_REG5 {
+-                              regulator-name = "vccio_sd";
+-                              regulator-min-microvolt = <1800000>;
+-                              regulator-max-microvolt = <3300000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vcc3v3_pmu: LDO_REG6 {
+-                              regulator-name = "vcc3v3_pmu";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-min-microvolt = <3300000>;
+-                              regulator-max-microvolt = <3300000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-on-in-suspend;
+-                                      regulator-suspend-microvolt = <3300000>;
+-                              };
+-                      };
+-
+-                      vcca_1v8: LDO_REG7 {
+-                              regulator-name = "vcca_1v8";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-min-microvolt = <1800000>;
+-                              regulator-max-microvolt = <1800000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vcca1v8_pmu: LDO_REG8 {
+-                              regulator-name = "vcca1v8_pmu";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-                              regulator-min-microvolt = <1800000>;
+-                              regulator-max-microvolt = <1800000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-on-in-suspend;
+-                                      regulator-suspend-microvolt = <1800000>;
+-                              };
+-                      };
+-
+-                      vcca1v8_image: LDO_REG9 {
+-                              regulator-name = "vcca1v8_image";
+-                              regulator-min-microvolt = <1800000>;
+-                              regulator-max-microvolt = <1800000>;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vcc_3v3: SWITCH_REG1 {
+-                              regulator-name = "vcc_3v3";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-
+-                      vcc3v3_sd: SWITCH_REG2 {
+-                              regulator-name = "vcc3v3_sd";
+-                              regulator-always-on;
+-                              regulator-boot-on;
+-
+-                              regulator-state-mem {
+-                                      regulator-off-in-suspend;
+-                              };
+-                      };
+-              };
+-
+-      };
+-};
+-
+-&i2c5 {
+-      status = "okay";
+-
+-      hym8563: rtc@51 {
+-              compatible = "haoyu,hym8563";
+-              reg = <0x51>;
+-              interrupt-parent = <&gpio0>;
+-              interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+-              #clock-cells = <0>;
+-              clock-output-names = "rtcic_32kout";
+-              pinctrl-names = "default";
+-              pinctrl-0 = <&hym8563_int>;
+-              wakeup-source;
+-      };
+-};
+-
+-&i2s0_8ch {
+-      status = "okay";
+-};
+-
+-&i2s1_8ch {
+-      rockchip,trcm-sync-tx-only;
+-      status = "okay";
+-};
+-
+ &mdio0 {
+       rgmii_phy0: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+@@ -568,146 +136,5 @@
+                       rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+-
+-      hym8563 {
+-              hym8563_int: hym8563-int {
+-                      rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+-              };
+-      };
+-
+-      pmic {
+-              pmic_int: pmic-int {
+-                      rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+-              };
+-      };
+-
+-      usb {
+-              vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+-                      rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+-              };
+-
+-              vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+-                      rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+-              };
+-      };
+-};
+-
+-&pmu_io_domains {
+-      pmuio1-supply = <&vcc3v3_pmu>;
+-      pmuio2-supply = <&vcc3v3_pmu>;
+-      vccio1-supply = <&vccio_acodec>;
+-      vccio3-supply = <&vccio_sd>;
+-      vccio4-supply = <&vcc_1v8>;
+-      vccio5-supply = <&vcc_3v3>;
+-      vccio6-supply = <&vcc_1v8>;
+-      vccio7-supply = <&vcc_3v3>;
+-      status = "okay";
+-};
+-
+-&saradc {
+-      vref-supply = <&vcca_1v8>;
+-      status = "okay";
+-};
+-
+-&sdhci {
+-      bus-width = <8>;
+-      max-frequency = <200000000>;
+-      non-removable;
+-      pinctrl-names = "default";
+-      pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+-      status = "okay";
+-};
+-
+-&sdmmc0 {
+-      max-frequency = <150000000>;
+-      no-sdio;
+-      no-mmc;
+-      bus-width = <4>;
+-      cap-mmc-highspeed;
+-      cap-sd-highspeed;
+-      disable-wp;
+-      vmmc-supply = <&vcc3v3_sd>;
+-      vqmmc-supply = <&vccio_sd>;
+-      pinctrl-names = "default";
+-      pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+-      status = "okay";
+-};
+-
+-&tsadc {
+-      rockchip,hw-tshut-mode = <1>;
+-      rockchip,hw-tshut-polarity = <0>;
+-      status = "okay";
+-};
+-
+-&uart2 {
+-      status = "okay";
+-};
+-
+-&usb_host0_ehci {
+-      status = "okay";
+-};
+-
+-&usb_host0_ohci {
+-      status = "okay";
+-};
+-
+-&usb_host0_xhci {
+-      extcon = <&usb2phy0>;
+-      dr_mode = "host";
+-      status = "okay";
+-};
+-
+-&usb_host1_ehci {
+-      status = "okay";
+-};
+-
+-&usb_host1_ohci {
+-      status = "okay";
+ };
+-&usb_host1_xhci {
+-      status = "okay";
+-};
+-
+-&usb2phy0 {
+-      status = "okay";
+-};
+-
+-&usb2phy0_host {
+-      phy-supply = <&vcc5v0_usb_host>;
+-      status = "okay";
+-};
+-
+-&usb2phy0_otg {
+-      status = "okay";
+-};
+-
+-&usb2phy1 {
+-      status = "okay";
+-};
+-
+-&usb2phy1_host {
+-      phy-supply = <&vcc5v0_usb_otg>;
+-      status = "okay";
+-};
+-
+-&usb2phy1_otg {
+-      status = "okay";
+-};
+-
+-&vop {
+-      assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+-      assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+-      status = "okay";
+-};
+-
+-&vop_mmu {
+-      status = "okay";
+-};
+-
+-&vp0 {
+-      vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+-              reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+-              remote-endpoint = <&hdmi_in_vp0>;
+-      };
+-};
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -0,0 +1,596 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++      aliases {
++              mmc0 = &sdmmc0;
++              mmc1 = &sdhci;
++      };
++
++      chosen: chosen {
++              stdout-path = "serial2:1500000n8";
++      };
++
++      hdmi-con {
++              compatible = "hdmi-connector";
++              type = "a";
++
++              port {
++                      hdmi_con_in: endpoint {
++                              remote-endpoint = <&hdmi_out_con>;
++                      };
++              };
++      };
++
++      vdd_usbc: vdd-usbc-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vdd_usbc";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++      };
++
++      vcc3v3_sys: vcc3v3-sys-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc3v3_sys";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              vin-supply = <&vdd_usbc>;
++      };
++
++      vcc5v0_sys: vcc5v0-sys-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc5v0_sys";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vdd_usbc>;
++      };
++
++      vcc3v3_pcie: vcc3v3-pcie-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc3v3_pcie";
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              enable-active-high;
++              gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
++              startup-delay-us = <200000>;
++              vin-supply = <&vcc5v0_sys>;
++      };
++
++      vcc5v0_usb: vcc5v0-usb-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "vcc5v0_usb";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vdd_usbc>;
++      };
++
++      vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++              compatible = "regulator-fixed";
++              enable-active-high;
++              gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++              pinctrl-names = "default";
++              pinctrl-0 = <&vcc5v0_usb_host_en>;
++              regulator-name = "vcc5v0_usb_host";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vcc5v0_usb>;
++      };
++
++      vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++              compatible = "regulator-fixed";
++              enable-active-high;
++              gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++              pinctrl-names = "default";
++              pinctrl-0 = <&vcc5v0_usb_otg_en>;
++              regulator-name = "vcc5v0_usb_otg";
++              regulator-min-microvolt = <5000000>;
++              regulator-max-microvolt = <5000000>;
++              vin-supply = <&vcc5v0_usb>;
++      };
++
++      pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "pcie30_avdd0v9";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <900000>;
++              regulator-max-microvolt = <900000>;
++              vin-supply = <&vcc3v3_sys>;
++      };
++
++      pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++              compatible = "regulator-fixed";
++              regulator-name = "pcie30_avdd1v8";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <1800000>;
++              regulator-max-microvolt = <1800000>;
++              vin-supply = <&vcc3v3_sys>;
++      };
++};
++
++&combphy0 {
++      status = "okay";
++};
++
++&combphy1 {
++      status = "okay";
++};
++
++&combphy2 {
++      status = "okay";
++};
++
++&cpu0 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++      cpu-supply = <&vdd_cpu>;
++};
++
++&gpu {
++      mali-supply = <&vdd_gpu>;
++      status = "okay";
++};
++
++&hdmi {
++      avdd-0v9-supply = <&vdda0v9_image>;
++      avdd-1v8-supply = <&vcca1v8_image>;
++      status = "okay";
++};
++
++&hdmi_in {
++      hdmi_in_vp0: endpoint {
++              remote-endpoint = <&vp0_out_hdmi>;
++      };
++};
++
++&hdmi_out {
++      hdmi_out_con: endpoint {
++              remote-endpoint = <&hdmi_con_in>;
++      };
++};
++
++&hdmi_sound {
++      status = "okay";
++};
++
++&i2c0 {
++      status = "okay";
++
++      vdd_cpu: regulator@1c {
++              compatible = "tcs,tcs4525";
++              reg = <0x1c>;
++              fcs,suspend-voltage-selector = <1>;
++              regulator-name = "vdd_cpu";
++              regulator-always-on;
++              regulator-boot-on;
++              regulator-min-microvolt = <800000>;
++              regulator-max-microvolt = <1150000>;
++              regulator-ramp-delay = <2300>;
++              vin-supply = <&vcc5v0_sys>;
++
++              regulator-state-mem {
++                      regulator-off-in-suspend;
++              };
++      };
++
++      rk809: pmic@20 {
++              compatible = "rockchip,rk809";
++              reg = <0x20>;
++              interrupt-parent = <&gpio0>;
++              interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++              #clock-cells = <1>;
++              pinctrl-names = "default";
++              pinctrl-0 = <&pmic_int>;
++              rockchip,system-power-controller;
++              vcc1-supply = <&vcc3v3_sys>;
++              vcc2-supply = <&vcc3v3_sys>;
++              vcc3-supply = <&vcc3v3_sys>;
++              vcc4-supply = <&vcc3v3_sys>;
++              vcc5-supply = <&vcc3v3_sys>;
++              vcc6-supply = <&vcc3v3_sys>;
++              vcc7-supply = <&vcc3v3_sys>;
++              vcc8-supply = <&vcc3v3_sys>;
++              vcc9-supply = <&vcc3v3_sys>;
++              wakeup-source;
++
++              regulators {
++                      vdd_logic: DCDC_REG1 {
++                              regulator-name = "vdd_logic";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-init-microvolt = <900000>;
++                              regulator-initial-mode = <0x2>;
++                              regulator-min-microvolt = <500000>;
++                              regulator-max-microvolt = <1350000>;
++                              regulator-ramp-delay = <6001>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdd_gpu: DCDC_REG2 {
++                              regulator-name = "vdd_gpu";
++                              regulator-always-on;
++                              regulator-init-microvolt = <900000>;
++                              regulator-initial-mode = <0x2>;
++                              regulator-min-microvolt = <500000>;
++                              regulator-max-microvolt = <1350000>;
++                              regulator-ramp-delay = <6001>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc_ddr: DCDC_REG3 {
++                              regulator-name = "vcc_ddr";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-initial-mode = <0x2>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                              };
++                      };
++
++                      vdd_npu: DCDC_REG4 {
++                              regulator-name = "vdd_npu";
++                              regulator-init-microvolt = <900000>;
++                              regulator-initial-mode = <0x2>;
++                              regulator-min-microvolt = <500000>;
++                              regulator-max-microvolt = <1350000>;
++                              regulator-ramp-delay = <6001>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc_1v8: DCDC_REG5 {
++                              regulator-name = "vcc_1v8";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdda0v9_image: LDO_REG1 {
++                              regulator-name = "vdda0v9_image";
++                              regulator-min-microvolt = <950000>;
++                              regulator-max-microvolt = <950000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdda_0v9: LDO_REG2 {
++                              regulator-name = "vdda_0v9";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <900000>;
++                              regulator-max-microvolt = <900000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vdda0v9_pmu: LDO_REG3 {
++                              regulator-name = "vdda0v9_pmu";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <900000>;
++                              regulator-max-microvolt = <900000>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                                      regulator-suspend-microvolt = <900000>;
++                              };
++                      };
++
++                      vccio_acodec: LDO_REG4 {
++                              regulator-name = "vccio_acodec";
++                              regulator-always-on;
++                              regulator-min-microvolt = <3300000>;
++                              regulator-max-microvolt = <3300000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vccio_sd: LDO_REG5 {
++                              regulator-name = "vccio_sd";
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <3300000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc3v3_pmu: LDO_REG6 {
++                              regulator-name = "vcc3v3_pmu";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <3300000>;
++                              regulator-max-microvolt = <3300000>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                                      regulator-suspend-microvolt = <3300000>;
++                              };
++                      };
++
++                      vcca_1v8: LDO_REG7 {
++                              regulator-name = "vcca_1v8";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcca1v8_pmu: LDO_REG8 {
++                              regulator-name = "vcca1v8_pmu";
++                              regulator-always-on;
++                              regulator-boot-on;
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-on-in-suspend;
++                                      regulator-suspend-microvolt = <1800000>;
++                              };
++                      };
++
++                      vcca1v8_image: LDO_REG9 {
++                              regulator-name = "vcca1v8_image";
++                              regulator-min-microvolt = <1800000>;
++                              regulator-max-microvolt = <1800000>;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc_3v3: SWITCH_REG1 {
++                              regulator-name = "vcc_3v3";
++                              regulator-always-on;
++                              regulator-boot-on;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++
++                      vcc3v3_sd: SWITCH_REG2 {
++                              regulator-name = "vcc3v3_sd";
++                              regulator-always-on;
++                              regulator-boot-on;
++
++                              regulator-state-mem {
++                                      regulator-off-in-suspend;
++                              };
++                      };
++              };
++
++      };
++};
++
++&i2c5 {
++      status = "okay";
++
++      hym8563: rtc@51 {
++              compatible = "haoyu,hym8563";
++              reg = <0x51>;
++              interrupt-parent = <&gpio0>;
++              interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++              #clock-cells = <0>;
++              clock-output-names = "rtcic_32kout";
++              pinctrl-names = "default";
++              pinctrl-0 = <&hym8563_int>;
++              wakeup-source;
++      };
++};
++
++&i2s0_8ch {
++      status = "okay";
++};
++
++&i2s1_8ch {
++      rockchip,trcm-sync-tx-only;
++      status = "okay";
++};
++
++&pcie30phy {
++      data-lanes = <1 2>;
++      status = "okay";
++};
++
++&pinctrl {
++      hym8563 {
++              hym8563_int: hym8563-int {
++                      rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++              };
++      };
++
++      pmic {
++              pmic_int: pmic-int {
++                      rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++              };
++      };
++
++      usb {
++              vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++                      rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++
++              vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++                      rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++              };
++      };
++};
++
++&pmu_io_domains {
++      pmuio1-supply = <&vcc3v3_pmu>;
++      pmuio2-supply = <&vcc3v3_pmu>;
++      vccio1-supply = <&vccio_acodec>;
++      vccio3-supply = <&vccio_sd>;
++      vccio4-supply = <&vcc_1v8>;
++      vccio5-supply = <&vcc_3v3>;
++      vccio6-supply = <&vcc_1v8>;
++      vccio7-supply = <&vcc_3v3>;
++      status = "okay";
++};
++
++&saradc {
++      vref-supply = <&vcca_1v8>;
++      status = "okay";
++};
++
++&sdhci {
++      bus-width = <8>;
++      max-frequency = <200000000>;
++      non-removable;
++      pinctrl-names = "default";
++      pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
++      status = "okay";
++};
++
++&sdmmc0 {
++      max-frequency = <150000000>;
++      no-sdio;
++      no-mmc;
++      bus-width = <4>;
++      cap-mmc-highspeed;
++      cap-sd-highspeed;
++      disable-wp;
++      vmmc-supply = <&vcc3v3_sd>;
++      vqmmc-supply = <&vccio_sd>;
++      pinctrl-names = "default";
++      pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++      status = "okay";
++};
++
++&tsadc {
++      rockchip,hw-tshut-mode = <1>;
++      rockchip,hw-tshut-polarity = <0>;
++      status = "okay";
++};
++
++&uart2 {
++      status = "okay";
++};
++
++&usb_host0_ehci {
++      status = "okay";
++};
++
++&usb_host0_ohci {
++      status = "okay";
++};
++
++&usb_host0_xhci {
++      extcon = <&usb2phy0>;
++      dr_mode = "host";
++      status = "okay";
++};
++
++&usb_host1_ehci {
++      status = "okay";
++};
++
++&usb_host1_ohci {
++      status = "okay";
++};
++
++&usb_host1_xhci {
++      status = "okay";
++};
++
++&usb2phy0 {
++      status = "okay";
++};
++
++&usb2phy0_host {
++      phy-supply = <&vcc5v0_usb_host>;
++      status = "okay";
++};
++
++&usb2phy0_otg {
++      status = "okay";
++};
++
++&usb2phy1 {
++      status = "okay";
++};
++
++&usb2phy1_host {
++      phy-supply = <&vcc5v0_usb_otg>;
++      status = "okay";
++};
++
++&usb2phy1_otg {
++      status = "okay";
++};
++
++&vop {
++      assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++      assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++      status = "okay";
++};
++
++&vop_mmu {
++      status = "okay";
++};
++
++&vp0 {
++      vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++              reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++              remote-endpoint = <&hdmi_in_vp0>;
++      };
++};
diff --git a/target/linux/rockchip/patches-6.1/011-v6.4-arm64-dts-rockchip-fix-gmac-support-for-NanoPi-R5S.patch b/target/linux/rockchip/patches-6.1/011-v6.4-arm64-dts-rockchip-fix-gmac-support-for-NanoPi-R5S.patch
new file mode 100644 (file)
index 0000000..47f76d5
--- /dev/null
@@ -0,0 +1,49 @@
+From 31425b1fadb2040b359e52ffc24c049a78d56c96 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:44 +0800
+Subject: [PATCH] arm64: dts: rockchip: fix gmac support for NanoPi R5S
+
+- Changed phy-mode to rgmii.
+
+- Fixed pull type in pinctrl for gmac0.
+
+- Removed duplicate properties in mdio node.
+  These properties are defined in the gmac0 node already.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-5-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -57,7 +57,7 @@
+       assigned-clock-rates = <0>, <125000000>;
+       clock_in_out = "output";
+       phy-handle = <&rgmii_phy0>;
+-      phy-mode = "rgmii-id";
++      phy-mode = "rgmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac0_miim
+                    &gmac0_tx_bus2
+@@ -79,9 +79,6 @@
+               reg = <1>;
+               pinctrl-0 = <&eth_phy0_reset_pin>;
+               pinctrl-names = "default";
+-              reset-assert-us = <10000>;
+-              reset-deassert-us = <50000>;
+-              reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+       };
+ };
+@@ -115,7 +112,7 @@
+ &pinctrl {
+       gmac0 {
+               eth_phy0_reset_pin: eth-phy0-reset-pin {
+-                      rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
++                      rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+               };
+       };
diff --git a/target/linux/rockchip/patches-6.1/012-v6.4-arm64-dts-rockchip-remove-I2S1-TDM-node-for-the-NanoPi-R5.patch b/target/linux/rockchip/patches-6.1/012-v6.4-arm64-dts-rockchip-remove-I2S1-TDM-node-for-the-NanoPi-R5.patch
new file mode 100644 (file)
index 0000000..48021b2
--- /dev/null
@@ -0,0 +1,39 @@
+From 975e9bbad11950fc8276f1fa260d8bf2c341aa41 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:45 +0800
+Subject: [PATCH] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5
+ series
+
+This is for the audio output which does not exist on the boards.
+Also disable regulator-always-on for vccio_acodec since it's only
+used by the audio output.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -330,7 +330,6 @@
+                       vccio_acodec: LDO_REG4 {
+                               regulator-name = "vccio_acodec";
+-                              regulator-always-on;
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+@@ -441,11 +440,6 @@
+       status = "okay";
+ };
+-&i2s1_8ch {
+-      rockchip,trcm-sync-tx-only;
+-      status = "okay";
+-};
+-
+ &pcie30phy {
+       data-lanes = <1 2>;
+       status = "okay";
diff --git a/target/linux/rockchip/patches-6.1/110-arm64-dts-rockchip-Update-LED-properties-for-NanoPi-.patch b/target/linux/rockchip/patches-6.1/110-arm64-dts-rockchip-Update-LED-properties-for-NanoPi-.patch
new file mode 100644 (file)
index 0000000..8339ef5
--- /dev/null
@@ -0,0 +1,63 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Tue Jun 20 16:45:27 2023 +0800
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for NanoPi R5
+ series
+
+Add OpenWrt's LED aliases for showing system status.
+Also replace function/color with legacy label as OpenWrt relys on it
+to update LED settings.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -23,29 +23,22 @@
+               pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
+               led-lan1 {
+-                      color = <LED_COLOR_ID_GREEN>;
+-                      function = LED_FUNCTION_LAN;
+-                      function-enumerator = <1>;
++                      label = "green:lan1";
+                       gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+               };
+               led-lan2 {
+-                      color = <LED_COLOR_ID_GREEN>;
+-                      function = LED_FUNCTION_LAN;
+-                      function-enumerator = <2>;
++                      label = "green:lan2";
+                       gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+               };
+               power_led: led-power {
+-                      color = <LED_COLOR_ID_RED>;
+-                      function = LED_FUNCTION_POWER;
+-                      linux,default-trigger = "heartbeat";
++                      label = "red:power";
+                       gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+               };
+               led-wan {
+-                      color = <LED_COLOR_ID_GREEN>;
+-                      function = LED_FUNCTION_WAN;
++                      label = "green:wan";
+                       gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+               };
+       };
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -18,6 +18,11 @@
+       aliases {
+               mmc0 = &sdmmc0;
+               mmc1 = &sdhci;
++
++              led-boot = &power_led;
++              led-failsafe = &power_led;
++              led-running = &power_led;
++              led-upgrade = &power_led;
+       };
+       chosen: chosen {