int board_init(void)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- /* Enable Ctrlc */
- console_init_f();
/* Correct IRDA resistor problem / Set PA23_TXD in Output */
writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
writel(pin, &pio->piod.odr);
writel(pin, &pio->piod.owdr);
- /* Enable Ctrlc */
- console_init_f();
-
gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC;
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
int board_init(void)
{
- /* Enable Ctrlc */
- console_init_f();
-
#ifdef CONFIG_AT91SAM9G10EK
/* arch number of AT91SAM9G10EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
int board_init(void)
{
- /* Enable Ctrlc */
- console_init_f();
-
/* arch number of AT91SAM9M10G45EK-Board */
#ifdef CONFIG_AT91SAM9M10G45EK
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;
int board_init(void)
{
- /* Enable Ctrlc */
- console_init_f();
-
/* arch number of AT91SAM9RLEK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
/* adress of boot parameters */
int board_init(void)
{
- /* Enable Ctrlc */
- console_init_f();
-
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
int board_init(void)
{
- /* Enable Ctrlc */
- console_init_f();
-
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
int board_init(void)
{
- /* Enable Ctrlc */
- console_init_f();
/* arch number of CPUAT91-Board */
gd->bd->bi_arch_number = MACH_TYPE_CPUAT91;
/* adress of boot parameters */