define KernelPackage/diag
SUBMENU:=Other modules
- DEPENDS:=@LINUX_2_4_BRCM||LINUX_2_6_BRCM
+ DEPENDS:=@LINUX_2_4_BRCM||LINUX_2_6_BRCM||LINUX_2_6_BRCM47XX
TITLE:=Driver for router LEDs and Buttons
VERSION:=$(PKG_RELEASE)+$(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)
FILES:=$(PKG_BUILD_DIR)/diag.$(LINUX_KMOD_SUFFIX)
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef
+ifeq ($(BOARD),brcm)
+ BUILDFLAGS=-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include
+endif
+
define Build/Compile
$(MAKE) -C "$(LINUX_DIR)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
ARCH="$(LINUX_KARCH)" \
SUBDIRS="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include" \
+ EXTRA_CFLAGS="$(BUILDFLAGS)" \
modules
endef
boardnum = getvar("boardnum");
boardtype = getvar("boardtype");
- if (strncmp(getvar("model_no"), "WL700",5) == 0) {
- return &platforms[WL700GE]; }
+ if (strcmp(getvar("nvram_type"), "cfe") == 0)
+ return &platforms[WGT634U];
+
+ if (strncmp(getvar("model_no"), "WL700",5) == 0)
+ return &platforms[WL700GE];
if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
/* CFE based - newer hardware */
* $Id:$
*/
+#include <linux/irq.h>
#define MODULE_NAME "diag"
#define MAX_GPIO 8
#ifndef __DIAG_GPIO_H
#define __DIAG_GPIO_H
+#include <linux/interrupt.h>
+
+#ifndef BCMDRIVER
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_extif.h>
+
+extern struct ssb_bus ssb;
+
+#define gpio_op(op, param...) \
+ do { \
+ if (ssb.chipco.dev) \
+ return ssb_chipco_gpio_##op(&ssb.chipco, param); \
+ else if (ssb.extif.dev) \
+ return ssb_extif_gpio_##op(&ssb.extif, param); \
+ else \
+ return 0; \
+ } while (0);
+
+
+static inline u32 gpio_in(void)
+{
+ gpio_op(in, ~0);
+}
+
+static inline u32 gpio_out(u32 mask, u32 value)
+{
+ gpio_op(out, mask, value);
+}
+
+static inline u32 gpio_outen(u32 mask, u32 value)
+{
+ gpio_op(outen, mask, value);
+}
+
+static inline u32 gpio_control(u32 mask, u32 value)
+{
+ if (ssb.chipco.dev)
+ return ssb_chipco_gpio_control(&ssb.chipco, mask, value);
+ else
+ return 0;
+}
+
+static inline u32 gpio_intmask(u32 mask, u32 value)
+{
+ gpio_op(intmask, mask, value);
+}
+
+static inline u32 gpio_intpolarity(u32 mask, u32 value)
+{
+ gpio_op(polarity, mask, value);
+}
+
+static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *, struct pt_regs *))
+{
+ int irq;
+
+ if (ssb.chipco.dev)
+ irq = ssb_mips_irq(ssb.chipco.dev) + 2;
+ else if (ssb.extif.dev)
+ irq = ssb_mips_irq(ssb.extif.dev) + 2;
+ else return;
+
+ if (enabled)
+ request_irq(irq, handler, SA_SHIRQ | SA_SAMPLE_RANDOM, "gpio", handler);
+ else
+ free_irq(irq, handler);
+
+ gpio_intmask(1, (enabled ? 1 : 0));
+}
+
+#else
#include <typedefs.h>
#include <osl.h>
#define sbh_lock bcm947xx_sbh_lock
#endif
-#define EXTIF_ADDR 0x1f000000
-#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
-
-#define GPIO_TYPE_NORMAL (0x0 << 24)
-#define GPIO_TYPE_EXTIF (0x1 << 24)
-#define GPIO_TYPE_MASK (0xf << 24)
-
extern void *sbh;
extern spinlock_t sbh_lock;
spin_unlock_irqrestore(sbh_lock, flags);
}
+#endif /* BCMDRIVER */
+
+#define EXTIF_ADDR 0x1f000000
+#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
+
+#define GPIO_TYPE_NORMAL (0x0 << 24)
+#define GPIO_TYPE_EXTIF (0x1 << 24)
+#define GPIO_TYPE_MASK (0xf << 24)
+
static inline void gpio_set_extif(int gpio, int value)
{
volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (gpio & ~GPIO_TYPE_MASK);
*addr;
}
-
-#endif
+#endif /* __DIAG_GPIO_H */
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
-# $Id:$
+# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
define KernelPackage/switch
SUBMENU:=Other modules
- DEPENDS:=@LINUX_2_6_BRCM||LINUX_2_4_BRCM
+ DEPENDS:=@LINUX_2_6_BRCM||LINUX_2_4_BRCM||LINUX_2_6_BRCM47XX
TITLE:=Switch drivers
DESCRIPTION:=\
This package contains switch drivers for ADM6996L and BCM53XX RoboSwitch.
$(CP) ./src/* $(PKG_BUILD_DIR)/
endef
+ifeq ($(BOARD),brcm)
+BUILDFLAGS := -DBROADCOM -DBCMDRIVER
+else
+ifeq ($(BOARD),brcm47xx)
+BUILDFLAGS := -DBROADCOM
+endif
+endif
+
+
define Build/Compile
$(MAKE) -C "$(LINUX_DIR)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
ARCH="$(LINUX_KARCH)" \
SUBDIRS="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="-DBCMGPIO2" \
+ EXTRA_CFLAGS="$(BUILDFLAGS)" \
modules
endef
--- /dev/null
+#ifndef __SWITCH_GPIO_H
+#define __SWITCH_GPIO_H
+#include <linux/interrupt.h>
+
+#ifndef BCMDRIVER
+#include <linux/ssb/ssb.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_driver_extif.h>
+
+extern struct ssb_bus ssb;
+
+#define gpio_op(op, param...) \
+ do { \
+ if (ssb.chipco.dev) \
+ return ssb_chipco_gpio_##op(&ssb.chipco, param); \
+ else if (ssb.extif.dev) \
+ return ssb_extif_gpio_##op(&ssb.extif, param); \
+ else \
+ return 0; \
+ } while (0);
+
+
+static inline u32 gpio_in(void)
+{
+ gpio_op(in, ~0);
+}
+
+static inline u32 gpio_out(u32 mask, u32 value)
+{
+ gpio_op(out, mask, value);
+}
+
+static inline u32 gpio_outen(u32 mask, u32 value)
+{
+ gpio_op(outen, mask, value);
+}
+
+static inline u32 gpio_control(u32 mask, u32 value)
+{
+ if (ssb.chipco.dev)
+ return ssb_chipco_gpio_control(&ssb.chipco, mask, value);
+ else
+ return 0;
+}
+
+static inline u32 gpio_intmask(u32 mask, u32 value)
+{
+ gpio_op(intmask, mask, value);
+}
+
+static inline u32 gpio_intpolarity(u32 mask, u32 value)
+{
+ gpio_op(polarity, mask, value);
+}
+
+#else
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmdevs.h>
+#include <sbutils.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <sbmips.h>
+#else
+#include <hndcpu.h>
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+#endif
+
+extern void *sbh;
+extern spinlock_t sbh_lock;
+
+#define gpio_in() sb_gpioin(sbh)
+#define gpio_out(mask, value) sb_gpioout(sbh, mask, ((value) & (mask)), GPIO_DRV_PRIORITY)
+#define gpio_outen(mask, value) sb_gpioouten(sbh, mask, value, GPIO_DRV_PRIORITY)
+#define gpio_control(mask, value) sb_gpiocontrol(sbh, mask, value, GPIO_DRV_PRIORITY)
+#define gpio_intmask(mask, value) sb_gpiointmask(sbh, mask, value, GPIO_DRV_PRIORITY)
+#define gpio_intpolarity(mask, value) sb_gpiointpolarity(sbh, mask, value, GPIO_DRV_PRIORITY)
+
+#endif /* BCMDRIVER */
+#endif /* __SWITCH_GPIO_H */
#ifndef __GPIO_H
#define __GPIO_H
-#if defined(BCMGPIO2)
-
-#ifdef LINUX_2_4
-#define sbh bcm947xx_sbh
-extern void *bcm947xx_sbh;
-#else
-extern void *sbh;
-#endif
-
-extern __u32 sb_gpioin(void *sbh);
-extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val, __u8 prio);
-extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val, __u8 prio);
-
-#define gpioin() sb_gpioin(sbh)
-#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val, 0)
-#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val, 0)
-#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val, 0)
-#define gpioout(mask,val) sb_gpioout(sbh, mask, val, 0)
-
-#elif defined(BCMGPIO)
-
-#define sbh bcm947xx_sbh
-extern void *bcm947xx_sbh;
-extern __u32 sb_gpioin(void *sbh);
-extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val);
-extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val);
-
-#define gpioin() sb_gpioin(sbh)
-#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val)
-#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val)
-#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val)
-#define gpioout(mask,val) sb_gpioout(sbh, mask, val)
-
+#ifdef BROADCOM
+#include "gpio-bcm947xx.h"
#else
-#error Unsupported/unknown GPIO configuration
+#error "Unsupported configuration."
#endif
#endif /* __GPIO_H */
int i, len = (bits + 7) / 8;
__u8 mask;
- gpioout(eecs, (cs ? eecs : 0));
+ gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
/* Bit bang from MSB to LSB */
for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
/* Output on rising edge */
- gpioout(eedi, ((mask & buf[i]) ? eedi : 0));
+ gpio_out(eedi, ((mask & buf[i]) ? eedi : 0));
udelay(EEDI_SETUP_TIME);
/* Clock high */
- gpioout(eesk, eesk);
+ gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
}
}
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
if (cs)
- gpioout(eecs, 0);
+ gpio_out(eecs, 0);
}
int i, len = (bits + 7) / 8;
__u8 mask;
- gpioout(eecs, (cs ? eecs : 0));
+ gpio_out(eecs, (cs ? eecs : 0));
udelay(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
__u8 gp;
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
/* Input on rising edge */
- gp = gpioin();
+ gp = gpio_in();
if (gp & eedi)
byte |= mask;
/* Clock high */
- gpioout(eesk, eesk);
+ gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
}
}
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
if (cs)
- gpioout(eecs, 0);
+ gpio_out(eecs, 0);
}
static void adm_enout(__u8 pins, __u8 val)
{
/* Prepare GPIO output value */
- gpioout(pins, val);
+ gpio_out(pins, val);
/* Enable GPIO outputs */
- gpioouten(pins, pins);
+ gpio_outen(pins, pins);
udelay(EECK_EDGE_TIME);
}
static void adm_disout(__u8 pins)
{
/* Disable GPIO outputs */
- gpioouten(pins, 0);
+ gpio_outen(pins, 0);
udelay(EECK_EDGE_TIME);
}
int i;
for (i = 0; i < clocks; i++) {
/* Clock high */
- gpioout(eesk, eesk);
+ gpio_out(eesk, eesk);
udelay(EECK_EDGE_TIME);
/* Clock low */
- gpioout(eesk, 0);
+ gpio_out(eesk, 0);
udelay(EECK_EDGE_TIME);
}
}
projects / openwrt / staging / rmilecki.git / commitdiff