build: add helpers for generating QSDK sysupgrade compatible images

Qualcomm SDK (QSDK) sysupgrade compatible images for IPQ40xx, IPQ806x
and IPQ807x use FIT format together with 'dumpimage' tool from U-Boot
for verifying and extracting them. Based on 'images' sections names,
corresponding mtd partitions are flashed. For example, in case of
NOR-only boards, below mapping is used (section name -> mtd name):

  hlos*   -> 0:HLOS
  rootfs* -> rootfs

And for boards with NAND (kernel inside UBI):

  ubi* -> rootfs

Above mappings come from unmodified QSDK sources and might be wrong for
boards running custom or modified QSDK-based firmware. Some of vendors
adjust them to meet their modified mtd layout or features like recovery
or dual-image support.

This adds simple script 'mkits-qsdk-ipq-image.sh' (based on 'mkits.sh')
for generating FIT images tree source files, compatible with the QSDK
sysupgrade format. Resulting images can be used for initial (factory ->
OpenWrt) installation and would work both in CLI and GUI.

The script is universal in a way it allows to include as many sections
as needed. To make use of it, two generic/basic build recipes for NOR
and NAND based boards are also included in 'image-commands.mk':

  Build/qsdk-ipq-factory-nand
  Build/qsdk-ipq-factory-nor

Example usage for board with UBI in NAND:

  IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

diff --git a/include/image-commands.mk b/include/image-commands.mk
index 56bad539b32a7fae10b1dcd094567c9db6decc07..47d7193434d16c39cb2fb0c87bef93dd29169a1d 100644 (file)
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -294,6 +294,20 @@ define Build/openmesh-image
                "$(call param_get_default,rootfs,$(1),$@)" "rootfs"
 endef
 
+define Build/qsdk-ipq-factory-nand
+       $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
+               $@.its ubi $@
+       mkimage -f $@.its $@.new
+       @mv $@.new $@
+endef
+
+define Build/qsdk-ipq-factory-nor
+       $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
+               $@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
+       mkimage -f $@.its $@.new
+       @mv $@.new $@
+endef
+
 define Build/senao-header
        $(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
        mv $@.new $@

diff --git a/scripts/mkits-qsdk-ipq-image.sh b/scripts/mkits-qsdk-ipq-image.sh
new file mode 100755 (executable)
index 0000000..066e8df
--- /dev/null
+++ b/scripts/mkits-qsdk-ipq-image.sh
@@ -0,0 +1,59 @@
+#!/usr/bin/env bash
+#
+# Licensed under the terms of the GNU GPL License version 2 or later.
+# Author: Piotr Dymacz <pepe2k@gmail.com>, based on mkits.sh.
+#
+# Qualcomm SDK (QSDK) sysupgrade compatible images for IPQ40xx, IPQ806x
+# and IPQ807x use FIT format together with 'dumpimage' tool from U-Boot
+# for verifying and extracting them. Based on 'images' sections names,
+# corresponding mtd partitions are flashed.
+# This is a simple script for generating FIT images tree source files,
+# compatible with the QSDK sysupgrade format. Resulting images can be
+# used for initial (factory -> OpenWrt) installation and would work
+# both in CLI and GUI. The script is also universal in a way it allows
+# to include as many sections as needed.
+#
+
+usage() {
+       echo "Usage: `basename $0` output img0_name img0_file [[img1_name img1_file] ...]"
+       exit 1
+}
+
+# We need at least 3 arguments
+[ "$#" -lt 3 ] && usage
+
+# Target output file
+OUTPUT="$1"; shift
+
+# Create a default, fully populated DTS file
+echo "\
+/dts-v1/;
+
+/ {
+       description = \"OpenWrt factory image\";
+       #address-cells = <1>;
+
+       images {" > ${OUTPUT}
+
+while [ -n "$1" -a -n "$2" ]; do
+       [ -f "$2" ] || usage
+
+       name="$1"; shift
+       file="$1"; shift
+
+       echo \
+"              ${name} {
+                       description = \"${name}\";
+                       data = /incbin/(\"${file}\");
+                       type = \"Firmware\";
+                       arch = \"ARM\";
+                       compression = \"none\";
+                       hash@1 {
+                               algo = \"crc32\";
+                       };
+               };" >> ${OUTPUT}
+done
+
+echo \
+"      };
+};" >> ${OUTPUT}