ath79: set &eth1 status for TP-Link CPE devices in parent DTSI

The status is set to "okay" for all devices on ar9344, so just move
this to the parent DTSI.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi
index 27a8d0aa13a4353be20c22630f64f58b2dd93258..9a6f0ea5abfabf379460b5e1bf52bdcf6b93c41c 100644 (file)
--- a/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe.dtsi
@@ -110,3 +110,7 @@
 
        mtd-mac-address = <&info 0x8>;
 };
+
+&eth1 {
+       status = "okay";
+};

diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
index 54ea399b7454a9317d133bb9522d47da3855a997..de4139707285a2e27cce60a768fa6c9d2a4d1b2f 100644 (file)
--- a/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v1.dts
@@ -30,7 +30,5 @@
 };
 
 &eth1 {
-       status = "okay";
-
        compatible = "syscon", "simple-mfd";
 };

diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi
index 057ba4572f4c92e258b55b38cbe2638b55be95a6..be29d944b2ca3e1feab5d19c90b809cccc2c73c8 100644 (file)
--- a/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe_1port.dtsi
@@ -41,7 +41,5 @@
 };
 
 &eth1 {
-       status = "okay";
-
        compatible = "syscon", "simple-mfd";
 };

diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi b/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi
index 8a1332c9c5aebf1a4c26bc9a7cd47b5fee1c31fe..089114f21b81f2dce72d9cb521912a2e279f5c5a 100644 (file)
--- a/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe_2port.dtsi
@@ -61,8 +61,6 @@
 };
 
 &eth1 {
-       status = "okay";
-
        mtd-mac-address = <&info 0x8>;
 
        gmac-config {