--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -4157,7 +4157,9 @@
+@@ -4160,7 +4160,9 @@
rfilt |= HAL_RX_FILTER_PROM;
if (ic->ic_opmode == IEEE80211_M_STA ||
sc->sc_opmode == HAL_M_IBSS || /* NB: AHDEMO too */
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -6456,6 +6456,7 @@
+@@ -6459,6 +6459,7 @@
int type;
u_int phyerr;
u_int processed = 0, early_stop = 0;
DPRINTF(sc, ATH_DEBUG_RX_PROC, "invoked\n");
process_rx_again:
-@@ -6557,24 +6558,8 @@
+@@ -6560,24 +6561,8 @@
}
if (rs->rs_status & HAL_RXERR_MIC) {
sc->sc_stats.ast_rx_badmic++;
}
/*
* Reject error frames if we have no vaps that
-@@ -6613,8 +6598,9 @@
+@@ -6616,8 +6601,9 @@
/*
* Finished monitor mode handling, now reject
* error frames before passing to other vaps
ieee80211_dev_kfree_skb(&skb);
goto rx_next;
}
-@@ -6622,6 +6608,26 @@
+@@ -6625,6 +6611,26 @@
/* remove the CRC */
skb_trim(skb, skb->len - IEEE80211_CRC_LEN);
/*
* From this point on we assume the frame is at least
* as large as ieee80211_frame_min; verify that.
-@@ -6634,6 +6640,7 @@
+@@ -6637,6 +6643,7 @@
goto rx_next;
}
ATH_RXBUF_LOCK_IRQ(sc);
if (sc->sc_rxbufcur == NULL)
sc->sc_rxbufcur = STAILQ_FIRST(&sc->sc_rxbuf);
-@@ -8978,6 +8976,7 @@
+@@ -8981,6 +8979,7 @@
sc->sc_curchan.channel);
sc->sc_stats.ast_per_calfail++;
}
ath_hal_process_noisefloor(ah);
if (isIQdone == AH_TRUE) {
-@@ -9046,6 +9045,7 @@
+@@ -9049,6 +9048,7 @@
struct ath_softc *sc = dev->priv;
(void) ath_chan_set(sc, ic->ic_curchan);
/*
* If we are returning to our bss channel then mark state
* so the next recv'd beacon's TSF will be used to sync the
-@@ -9314,6 +9314,7 @@
+@@ -9317,6 +9317,7 @@
}
ath_hal_process_noisefloor(ah);
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8692,6 +8692,10 @@
+@@ -8695,6 +8695,10 @@
sc->sc_rxbufcur = NULL;
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -9795,7 +9795,9 @@
+@@ -9798,7 +9798,9 @@
/*
* Convert HAL channels to ieee80211 ones.
*/
for (i = 0; i < nchan; i++) {
HAL_CHANNEL *c = &chans[i];
struct ieee80211_channel *ichan = &ic->ic_channels[i];
-@@ -9822,6 +9824,7 @@
+@@ -9825,6 +9827,7 @@
ic->ic_chan_non_occupy[i].tv_sec = 0;
ic->ic_chan_non_occupy[i].tv_usec = 0;
IPRINTF(sc, "Channel %3d (%4d MHz) Max Tx Power %d dBm%s "
"[%d hw %d reg] Flags%s%s%s%s%s%s%s%s%s%s%s%s%"
"s%s%s%s%s%s%s%s%s%s%s%s\n",
-@@ -9910,6 +9913,7 @@
+@@ -9913,6 +9916,7 @@
(c->privFlags & 0x0080 ?
" PF & (1 << 7)" : "")
);
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8441,8 +8441,6 @@
+@@ -8444,8 +8444,6 @@
ath_hal_intrset(sc->sc_ah, sc->sc_imask);
local_irq_restore(flags);
if (sc->sc_softled)
ath_led_event(sc, ATH_LED_TX);
}
-@@ -8489,8 +8487,6 @@
+@@ -8492,8 +8490,6 @@
ath_hal_intrset(sc->sc_ah, sc->sc_imask);
local_irq_restore(flags);
if (sc->sc_softled)
ath_led_event(sc, ATH_LED_TX);
}
-@@ -8523,8 +8519,6 @@
+@@ -8526,8 +8522,6 @@
ath_hal_intrset(sc->sc_ah, sc->sc_imask);
local_irq_restore(flags);
* Convert to a HAL channel description with the flags
* constrained to reflect the current operating mode.
*/
-@@ -5153,6 +5177,8 @@
+@@ -5156,6 +5180,8 @@
"Invoking ath_hal_txstart with sc_bhalq: %d\n",
sc->sc_bhalq);
ath_hal_txstart(ah, sc->sc_bhalq);
sc->sc_stats.ast_be_xmit++; /* XXX per-VAP? */
}
-@@ -5402,6 +5428,7 @@
+@@ -5405,6 +5431,7 @@
ath_hal_beacontimers(ah, &bs);
sc->sc_imask |= HAL_INT_BMISS;
ath_hal_intrset(ah, sc->sc_imask);
} else {
ath_hal_intrset(ah, 0);
if (reset_tsf)
-@@ -5413,8 +5440,11 @@
+@@ -5416,8 +5443,11 @@
*/
intval |= HAL_BEACON_ENA;
sc->sc_imask |= HAL_INT_SWBA;
#ifdef ATH_SUPERG_DYNTURBO
ath_beacon_dturbo_config(vap, intval &
~(HAL_BEACON_RESET_TSF | HAL_BEACON_ENA));
-@@ -8882,6 +8912,9 @@
+@@ -8885,6 +8915,9 @@
/* Enter DFS wait period */
mod_timer(&sc->sc_dfs_cac_timer,
jiffies + (sc->sc_dfs_cac_period * HZ));
}
/*
* re configure beacons when it is a turbo mode switch.
-@@ -8991,8 +9024,11 @@
+@@ -8994,8 +9027,11 @@
sc->sc_curchan.channel, sc->sc_curchan.channelFlags,
isIQdone ? "done" : "not done");
}
static void
-@@ -9099,7 +9135,8 @@
+@@ -9102,7 +9138,8 @@
ieee80211_state_name[vap->iv_state],
ieee80211_state_name[nstate]);
ath_hal_setledstate(ah, leds[nstate]); /* set LED */
netif_stop_queue(dev); /* before we do anything else */
-@@ -9324,7 +9361,8 @@
+@@ -9327,7 +9364,8 @@
"VAP -> DFSWAIT_PENDING \n");
/* start calibration timer with a really small value
* 1/10 sec */
/* wake the receiver */
netif_wake_queue(dev);
/* don't do the other usual stuff... */
-@@ -9367,7 +9405,7 @@
+@@ -9370,7 +9408,7 @@
error = avp->av_newstate(vap, nstate, arg);
/* Finally, start any timers. */
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8923,7 +8923,7 @@
+@@ -8926,7 +8926,7 @@
* re configure beacons when it is a turbo mode switch.
* HW seems to turn off beacons during turbo mode switch.
*/
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8254,6 +8254,17 @@
+@@ -8257,6 +8257,17 @@
goto bf_fail;
}
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8104,6 +8104,7 @@
+@@ -8107,6 +8107,7 @@
ath_hal_setupxtxdesc(sc->sc_ah, ds, mrr.rate1, mrr.retries1,
mrr.rate2, mrr.retries2,
mrr.rate3, mrr.retries3);
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -10277,11 +10277,11 @@
+@@ -10280,11 +10280,11 @@
sc->sc_currates = rt;
sc->sc_curmode = mode;
/*
if (ar_device(sc->devid) == 5212 || ar_device(sc->devid) == 5213) {
/* set ack to be sent at low bit-rate */
/* registers taken from the OpenBSD 5212 HAL */
-@@ -10792,8 +10795,13 @@
+@@ -10795,8 +10798,13 @@
break;
#endif
case ATH_ACKRATE:
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8865,8 +8865,7 @@
+@@ -8868,8 +8868,7 @@
* needed to do the reset with chanchange = AH_FALSE in order
* to receive traffic when peforming high velocity channel
* changes. */
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
ath_setdefantenna(sc, sc->sc_defant);
-@@ -4173,6 +4200,8 @@
+@@ -4176,6 +4203,8 @@
if (sc->sc_nmonvaps > 0)
rfilt |= (HAL_RX_FILTER_CONTROL | HAL_RX_FILTER_BEACON |
HAL_RX_FILTER_PROBEREQ | HAL_RX_FILTER_PROM);
if (sc->sc_curchan.privFlags & CHANNEL_DFS)
rfilt |= (HAL_RX_FILTER_PHYERR | HAL_RX_FILTER_PHYRADAR);
return rfilt;
-@@ -6523,9 +6552,6 @@
+@@ -6526,9 +6555,6 @@
rs->rs_rssi = 0;
len = rs->rs_datalen;
if (rs->rs_more) {
/*
-@@ -8877,9 +8903,7 @@
+@@ -8880,9 +8906,7 @@
if (sc->sc_softled)
ath_hal_gpioCfgOutput(ah, sc->sc_ledpin);
sc->sc_curchan = hchan;
ath_update_txpow(sc); /* update tx power state */
ath_radar_update(sc);
-@@ -10656,9 +10680,54 @@
+@@ -10659,9 +10683,54 @@
ATH_RP_IGNORED = 24,
ATH_RADAR_IGNORED = 25,
ATH_MAXVAPS = 26,
ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos)
{
struct ath_softc *sc = ctl->extra1;
-@@ -10844,6 +10913,11 @@
+@@ -10847,6 +10916,11 @@
case ATH_RADAR_IGNORED:
sc->sc_radar_ignored = val;
break;
default:
ret = -EINVAL;
break;
-@@ -10910,6 +10984,11 @@
+@@ -10913,6 +10987,11 @@
case ATH_RADAR_IGNORED:
val = sc->sc_radar_ignored;
break;
default:
ret = -EINVAL;
break;
-@@ -11087,6 +11166,24 @@
+@@ -11090,6 +11169,24 @@
.proc_handler = ath_sysctl_halparam,
.extra2 = (void *)ATH_RADAR_IGNORED,
},
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -8325,6 +8325,18 @@
+@@ -8328,6 +8328,18 @@
#endif
if (ts->ts_status & HAL_TXERR_XRETRY) {
sc->sc_stats.ast_tx_xretries++;
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Index: madwifi-trunk-r3314/net80211/ieee80211_scan_sta.c
-===================================================================
---- madwifi-trunk-r3314.orig/net80211/ieee80211_scan_sta.c 2008-07-23 11:39:10.000000000 +0200
-+++ madwifi-trunk-r3314/net80211/ieee80211_scan_sta.c 2008-07-24 18:24:23.000000000 +0200
+--- a/net80211/ieee80211_scan_sta.c
++++ b/net80211/ieee80211_scan_sta.c
@@ -209,6 +209,19 @@
ieee80211_saveie(iep, ie);
}
/* simple hash is enough for variation of macaddr */
--- a/net80211/ieee80211_output.c
+++ b/net80211/ieee80211_output.c
-@@ -2140,7 +2140,7 @@
+@@ -2141,7 +2141,7 @@
ieee80211_mgmt_output(ieee80211_ref_node(ni), skb, type);
if (timer)
--- a/net80211/ieee80211_input.c
+++ b/net80211/ieee80211_input.c
-@@ -3398,12 +3398,17 @@
+@@ -3400,12 +3400,17 @@
}
/* WDS/Repeater: re-schedule software beacon timer for
if (ic->ic_roaming == IEEE80211_ROAMING_AUTO) {
#ifdef ATH_SUPERG_DYNTURBO
/*
-@@ -1617,14 +1642,14 @@
+@@ -1621,14 +1646,14 @@
}
/* WDS/Repeater: Start software beacon timer for STA */
--- a/net80211/ieee80211_var.h
+++ b/net80211/ieee80211_var.h
-@@ -282,6 +282,7 @@
+@@ -283,6 +283,7 @@
struct timer_list iv_swbmiss; /* software beacon miss timer */
u_int16_t iv_swbmiss_period; /* software beacon miss timer period */
#define SIOCG80211STATS (SIOCDEVPRIVATE+2)
--- a/net80211/ieee80211_wireless.c
+++ b/net80211/ieee80211_wireless.c
-@@ -2798,6 +2798,12 @@
+@@ -2799,6 +2799,12 @@
case IEEE80211_PARAM_ROAM_RATE_11G:
vap->iv_roam.rate11b = value;
break;
case IEEE80211_PARAM_UAPSDINFO:
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
if (ic->ic_caps & IEEE80211_C_UAPSD) {
-@@ -3183,6 +3189,12 @@
+@@ -3184,6 +3190,12 @@
case IEEE80211_PARAM_ROAM_RATE_11G:
param[0] = vap->iv_roam.rate11b;
break;
case IEEE80211_PARAM_UAPSDINFO:
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
if (IEEE80211_VAP_UAPSD_ENABLED(vap))
-@@ -5732,6 +5744,14 @@
+@@ -5733,6 +5745,14 @@
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "rate11g" },
{ IEEE80211_PARAM_ROAM_RATE_11G,
0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_rate11g" },
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -4914,7 +4914,7 @@
+@@ -4917,7 +4917,7 @@
* capability info and arrange for a mode change
* if needed.
*/
MODULE_PARM_DESC(autocreate, "Create ath device in "
"[sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use "
"'none' to disable");
-@@ -5061,7 +5065,7 @@
+@@ -5064,7 +5068,7 @@
DPRINTF(sc, ATH_DEBUG_BEACON_PROC,
"Missed %u consecutive beacons (n_beacon=%u)\n",
sc->sc_bmisscount, n_beacon);
ATH_SCHEDULE_TQUEUE(&sc->sc_bstucktq, needmark);
return;
}
-@@ -5217,7 +5221,7 @@
+@@ -5220,7 +5224,7 @@
* check will be true, in which case return
* without resetting the driver.
*/
--- a/net80211/ieee80211_wireless.c
+++ b/net80211/ieee80211_wireless.c
-@@ -3726,6 +3726,7 @@
+@@ -3723,6 +3723,7 @@
if (vap->iv_opmode == IEEE80211_M_STA) {
struct scanlookup lookup;
--- a/ath/if_ath.c
+++ b/ath/if_ath.c
-@@ -6321,7 +6321,7 @@
+@@ -6324,7 +6324,7 @@
/* Never copy the SKB, as it is ours on the RX side, and this is the
* last process on the TX side and we only modify our own headers. */
if (tskb == NULL) {
DPRINTF(sc, ATH_DEBUG_ANY,
"Dropping; ath_skb_removepad failed!\n");
-@@ -6329,6 +6329,8 @@
+@@ -6332,6 +6332,8 @@
}
ieee80211_input_monitor(ic, tskb, bf, tx, tsf, sc);