--- /dev/null
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case "$board" in
+gw,imx8mm-gw72xx-0x|\
+gw,imx8mp-gw72xx-2x|\
+gw,imx8mm-gw73xx-0x|\
+gw,imx8mp-gw73xx-2x|\
+gw,imx8mm-gw7902-0x)
+ ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
+ ;;
+gw,imx8mm-gw7901)
+ ucidef_set_interfaces_lan_wan 'lan2 lan3 lan4' 'lan1'
+ ;;
+gateworks,imx8mp-gw74xx)
+ ucidef_set_network_device_path "eth0" "platform/soc@0/30800000.bus/30bf0000.ethernet"
+ ucidef_set_network_device_path "eth1" "platform/soc@0/30800000.bus/30be0000.ethernet"
+ ucidef_set_interfaces_lan_wan 'lan1 lan2 lan3 lan4' 'eth1'
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+. /lib/functions.sh
+. /lib/upgrade/common.sh
+
+move_config() {
+ local board=$(board_name)
+ local partdev
+
+ export_bootdevice && export_partdevice partdev 1 && {
+ mount -o rw,noatime "/dev/$partdev" /mnt
+ [ -f "/mnt/$BACKUP_FILE" ] && {
+ mv -f "/mnt/$BACKUP_FILE" /
+ }
+ umount /mnt
+ }
+}
+
+boot_hook_add preinit_mount_root move_config
--- /dev/null
+
+enable_image_metadata_check() {
+ case "$(board_name)" in
+ gw,imx8m*)
+ REQUIRE_IMAGE_METADATA=1
+ ;;
+ esac
+}
+enable_image_metadata_check
+
+platform_check_image() {
+ local board=$(board_name)
+
+ case "$board" in
+ gw,imx8m*)
+ return 0
+ ;;
+ esac
+
+ echo "Sysupgrade is not yet supported on $board."
+ return 1
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+
+ case "$board" in
+ gw,imx8m*)
+ export_bootdevice && export_partdevice diskdev 0 || {
+ echo "Unable to find root device."
+ return 1
+ }
+ v "Updating /dev/$diskdev..."
+ get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
+ ;;
+ esac
+}
+
+platform_copy_config() {
+ local board=$(board_name)
+ local partdev
+
+ case "$board" in
+ gw,imx8m*)
+ export_partdevice partdev 1 && {
+ v "Storing $UPGRADE_BACKUP on /dev/$partdev..."
+ mount -o rw,noatime "/dev/$partdev" /mnt
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+ umount /mnt
+ }
+ ;;
+ esac
+}
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
+# CONFIG_COMMON_CLK_BD718XX is not set
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_CONTIG_ALLOC=y
CONFIG_CRYPTO_AES_ARM64=y
CONFIG_INTERCONNECT_IMX8MP=y
CONFIG_INTERCONNECT_IMX8MQ=y
CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_ROHM_BD718XX=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI is not set
+CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=y
+CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=y
+# CONFIG_NET_DSA_MICROCHIP_KSZ_SPI is not set
+CONFIG_NET_DSA_TAG_KSZ=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_PARTITION_PERCPU=y
CONFIG_PCI=y
CONFIG_POWER_SUPPLY=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_PCA9450=y
+CONFIG_REGULATOR_ROHM=y
CONFIG_RESET_IMX7=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
CONFIG_SOC_IMX8M=y
--- /dev/null
+# distro-config bootscript
+# - use only well-known variable names provided by U-Boot Distro boot
+# - devtype - device type script run from (mmc|usb|scsi)
+# - devnum - device number script run from (0 based int)
+# - distro_bootpart - partition script run from (0 based int)
+# - prefix - directory boot script was found in
+# - kernel_addr_r - address to load kernel image to
+# - fdt_addr_r - address to load dtb to
+# - ftdcontroladdr - address dtb is at
+# - fdt_file{1,2,3,4,5} name of fdt to load
+# - fdt_overlays - list of fdt overlay files to load and apply
+echo "Gateworks Venice OpenWrt Boot script v1.0"
+
+# determine root device using PARTUUID:
+# - this avoids any difference beteween uboot's device names/numbers
+# not matching Linux as device enumeration is not a set API.
+# - PARTUUID is disk UUID concatenated with partition number
+# - for MBR disk UUID is unique disk id at offset 440
+# - for GPT disk UUID is GPT UUID
+# - for OpenWrt the squasfs rootfs is not readable by U-Boot so we have
+# a 'boot' partition containing bootscript kernel dtbs followed by the rootfs
+# partition, therefore we add 1 to the current partition
+setexpr rootpart ${distro_bootpart} + 1 # root on 'next' partition
+part uuid ${devtype} ${devnum}:${rootpart} uuid
+setenv bootargs ${bootargs} console=${console} root=PARTUUID=${uuid} rootfstype=squashfs,ext4,f2fs rootwait
+
+# load dtb (we try fdt_file and then fdt_file{1,2,3,4,5})
+echo "loading DTB..."
+setenv fdt_addr
+setenv fdt_list $fdt_file $fdt_file1 $fdt_file2 $fdt_file3 $fdt_file4 $fdt_file5
+setenv load_fdt 'echo Loading $fdt...; load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${fdt} && setenv fdt_addr ${fdt_addr_r}'
+setenv apply_overlays 'fdt addr $fdt_addr_r && fdt resize && for fdt in "$fdt_overlays"; do load ${devtype} ${devnum}:${distro_bootpart} $loadaddr $prefix/$fdt && fdt apply $loadaddr && echo applied $prefix/$fdt; done'
+for fdt in ${fdt_list}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${fdt}; then run load_fdt; fi; done
+if test -z "$fdt_addr"; then echo "Warning: Using bootloader DTB"; setenv fdt_addr $fdtcontroladdr; fi
+if test -n "$fdt_overlays"; then echo "Applying overlays"; run apply_overlays; fi
+if test -n "$fixfdt"; then echo "Adjusting FDT"; run fixfdt; fi
+
+# load and boot kernel
+echo "loading kernel..."
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}Image &&
+booti ${kernel_addr_r} - ${fdt_addr}
+define Build/boot-scr
+ rm -f $@-boot.scr
+ mkimage -A arm64 -O linux -T script -C none -a 0 -e 0 \
+ -d bootscript-$(BOOT_SCRIPT) $@-boot.scr
+endef
+
+define Build/boot-img-ext4
+ rm -fR $@.boot
+ mkdir -p $@.boot
+ $(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+ $(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
+ -$(CP) $@-boot.scr $@.boot/boot.scr
+ make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
+ $(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
+ $@.bootimg $@.boot
+endef
+
+define Build/sdcard-img-ext4
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ PARTOFFSET="$(PARTITION_OFFSET)" PADDING=1 \
+ $(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
+ $@ \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
+ 256
+endef
+
define Device/Default
PROFILES := Default
FILESYSTEMS := squashfs ubifs ext4
DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*.dts)))
endef
TARGET_DEVICES += imx8m
+
+define Device/gateworks_venice
+ $(call Device/Default)
+ FILESYSTEMS := squashfs ext4
+ DEVICE_VENDOR := Gateworks
+ DEVICE_MODEL := i.MX8M Venice
+ BOOT_SCRIPT := gateworks_venice
+ PARTITION_OFFSET := 16M
+ DEVICE_DTS := $(basename $(notdir $(wildcard $(DTS_DIR)/freescale/imx8m*-venice*.dts)))
+ DEVICE_PACKAGES := \
+ kmod-hwmon-gsc kmod-rtc-ds1672 kmod-eeprom-at24 \
+ kmod-gpio-button-hotplug kmod-leds-gpio kmod-pps-gpio \
+ kmod-lan743x kmod-sky2 kmod-iio-st_accel-i2c \
+ kmod-can kmod-can-flexcan kmod-can-mcp251x
+ IMAGES := img.gz
+ IMAGE/img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += gateworks_venice
projects / openwrt / staging / thess.git / commitdiff