return cmd->error;
}
-/* The abort condition when PIO read/write
- tmo:
-*/
-static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo)
-{
- int ret = 0;
- void __iomem *base = host->base;
-
- if (atomic_read(&host->abort))
- ret = 1;
-
- if (time_after(jiffies, tmo)) {
- data->error = (unsigned int)-ETIMEDOUT;
- ERR_MSG("XXX PIO Data Timeout: CMD<%d>", host->mrq->cmd->opcode);
- ret = 1;
- }
-
- if (ret) {
- msdc_reset_hw(host);
- msdc_clr_fifo();
- msdc_clr_int();
- ERR_MSG("msdc pio find abort");
- }
- return ret;
-}
-
-/*
- Need to add a timeout, or WDT timeout, system reboot.
-*/
-// pio mode data read/write
-static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data)
-{
- struct scatterlist *sg = data->sg;
- void __iomem *base = host->base;
- u32 num = data->sg_len;
- u32 *ptr;
- u8 *u8ptr;
- u32 left = 0;
- u32 count, size = 0;
- u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
- unsigned long tmo = jiffies + DAT_TIMEOUT;
-
- sdr_set_bits(MSDC_INTEN, wints);
- while (num) {
- left = sg_dma_len(sg);
- ptr = sg_virt(sg);
- while (left) {
- if ((left >= MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) {
- count = MSDC_FIFO_THD >> 2;
- do {
- *ptr++ = msdc_fifo_read32();
- } while (--count);
- left -= MSDC_FIFO_THD;
- } else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) {
- while (left > 3) {
- *ptr++ = msdc_fifo_read32();
- left -= 4;
- }
-
- u8ptr = (u8 *)ptr;
- while (left) {
- *u8ptr++ = msdc_fifo_read8();
- left--;
- }
- }
-
- if (msdc_pio_abort(host, data, tmo))
- goto end;
- }
- size += sg_dma_len(sg);
- sg = sg_next(sg); num--;
- }
-end:
- data->bytes_xfered += size;
- N_MSG(FIO, " PIO Read<%d>bytes", size);
-
- sdr_clr_bits(MSDC_INTEN, wints);
- if (data->error)
- ERR_MSG("read pio data->error<%d> left<%d> size<%d>", data->error, left, size);
- return data->error;
-}
-
-/* please make sure won't using PIO when size >= 512
- which means, memory card block read/write won't using pio
- then don't need to handle the CMD12 when data error.
-*/
-static int msdc_pio_write(struct msdc_host *host, struct mmc_data *data)
-{
- void __iomem *base = host->base;
- struct scatterlist *sg = data->sg;
- u32 num = data->sg_len;
- u32 *ptr;
- u8 *u8ptr;
- u32 left;
- u32 count, size = 0;
- u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
- unsigned long tmo = jiffies + DAT_TIMEOUT;
-
- sdr_set_bits(MSDC_INTEN, wints);
- while (num) {
- left = sg_dma_len(sg);
- ptr = sg_virt(sg);
-
- while (left) {
- if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
- count = MSDC_FIFO_SZ >> 2;
- do {
- msdc_fifo_write32(*ptr); ptr++;
- } while (--count);
- left -= MSDC_FIFO_SZ;
- } else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) {
- while (left > 3) {
- msdc_fifo_write32(*ptr); ptr++;
- left -= 4;
- }
-
- u8ptr = (u8 *)ptr;
- while (left) {
- msdc_fifo_write8(*u8ptr); u8ptr++;
- left--;
- }
- }
-
- if (msdc_pio_abort(host, data, tmo))
- goto end;
- }
- size += sg_dma_len(sg);
- sg = sg_next(sg); num--;
- }
-end:
- data->bytes_xfered += size;
- N_MSG(FIO, " PIO Write<%d>bytes", size);
- if (data->error)
- ERR_MSG("write pio data->error<%d>", data->error);
-
- sdr_clr_bits(MSDC_INTEN, wints);
- return data->error;
-}
-
#if 0 /* --- by chhung */
// DMA resume / start / stop
static void msdc_dma_resume(struct msdc_host *host)
struct mmc_data *data;
void __iomem *base = host->base;
//u32 intsts = 0;
- unsigned int left = 0;
- int dma = 0, read = 1, send_type = 0;
+ int read = 1, send_type = 0;
#define SND_DAT 0
#define SND_CMD 1
host->xfer_size = data->blocks * data->blksz;
host->blksz = data->blksz;
- /* deside the transfer mode */
- host->dma_xfer = 1;
- dma = host->dma_xfer;
-
if (read) {
if ((host->timeout_ns != data->timeout_ns) ||
(host->timeout_clks != data->timeout_clks)) {
msdc_set_blknum(host, data->blocks);
//msdc_clr_fifo(); /* no need */
- if (dma) {
- msdc_dma_on(); /* enable DMA mode first!! */
- init_completion(&host->xfer_done);
-
- /* start the command first*/
- if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
- goto done;
-
- data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg,
- data->sg_len,
- mmc_get_dma_dir(data));
- msdc_dma_setup(host, &host->dma, data->sg,
- data->sg_count);
-
- /* then wait command done */
- if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
- goto done;
-
- /* for read, the data coming too fast, then CRC error
- start DMA no business with CRC. */
- //init_completion(&host->xfer_done);
- msdc_dma_start(host);
-
- spin_unlock(&host->lock);
- if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
- ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
- ERR_MSG(" DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
- ERR_MSG(" DMA_CA = 0x%x", sdr_read32(MSDC_DMA_CA));
- ERR_MSG(" DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
- ERR_MSG(" DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
- data->error = (unsigned int)-ETIMEDOUT;
+ msdc_dma_on(); /* enable DMA mode first!! */
+ init_completion(&host->xfer_done);
- msdc_reset_hw(host);
- msdc_clr_fifo();
- msdc_clr_int();
- }
- spin_lock(&host->lock);
- msdc_dma_stop(host);
- } else {
- /* Firstly: send command */
- if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
- goto done;
+ /* start the command first*/
+ if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0)
+ goto done;
- /* Secondly: pio data phase */
- if (read) {
- if (msdc_pio_read(host, data))
- goto done;
- } else {
- if (msdc_pio_write(host, data))
- goto done;
- }
+ data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg,
+ data->sg_len,
+ mmc_get_dma_dir(data));
+ msdc_dma_setup(host, &host->dma, data->sg,
+ data->sg_count);
- /* For write case: make sure contents in fifo flushed to device */
- if (!read) {
- while (1) {
- left = msdc_txfifocnt();
- if (left == 0)
- break;
- if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) {
- break;
- /* Fix me: what about if data error, when stop ? how to? */
- }
- }
- } else {
- /* Fix me: read case: need to check CRC error */
- }
+ /* then wait command done */
+ if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0)
+ goto done;
- /* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy.
- For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO.
- */
+ /* for read, the data coming too fast, then CRC error
+ start DMA no business with CRC. */
+ //init_completion(&host->xfer_done);
+ msdc_dma_start(host);
- /* try not to wait xfer_comp interrupt.
- the next command will check SDC_BUSY.
- SDC_BUSY means xfer_comp assert
- */
+ spin_unlock(&host->lock);
+ if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) {
+ ERR_MSG("XXX CMD<%d> wait xfer_done<%d> timeout!!", cmd->opcode, data->blocks * data->blksz);
+ ERR_MSG(" DMA_SA = 0x%x", sdr_read32(MSDC_DMA_SA));
+ ERR_MSG(" DMA_CA = 0x%x", sdr_read32(MSDC_DMA_CA));
+ ERR_MSG(" DMA_CTRL = 0x%x", sdr_read32(MSDC_DMA_CTRL));
+ ERR_MSG(" DMA_CFG = 0x%x", sdr_read32(MSDC_DMA_CFG));
+ data->error = (unsigned int)-ETIMEDOUT;
- } // PIO mode
+ msdc_reset_hw(host);
+ msdc_clr_fifo();
+ msdc_clr_int();
+ }
+ spin_lock(&host->lock);
+ msdc_dma_stop(host);
/* Last: stop transfer */
if (data->stop) {
done:
if (data != NULL) {
host->data = NULL;
- host->dma_xfer = 0;
- if (dma != 0) {
- msdc_dma_off();
- dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
- mmc_get_dma_dir(data));
- }
+ msdc_dma_off();
+ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
host->blksz = 0;
#if 0 // don't stop twice!
}
//if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) {
- if (host->dma_xfer)
- complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
- /* PIO mode can't do complete, because not init */
+ complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */
}
}
projects / openwrt / staging / blogic.git / commitdiff