--- /dev/null
+AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g070vvn01"
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: single regulator to provide the supply voltage
+
+Required nodes:
+- port: Parallel port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX6Q based board
+
+ lcd_panel: lcd-panel {
+ compatible = "auo,g070vvn01";
+ backlight = <&backlight_lcd>;
+ power-supply = <®_display>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
},
};
+static const struct display_timing auo_g070vvn01_timings = {
+ .pixelclock = { 33300000, 34209000, 45000000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 20, 40, 200 },
+ .hback_porch = { 87, 40, 1 },
+ .hsync_len = { 1, 48, 87 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 5, 13, 200 },
+ .vback_porch = { 31, 31, 29 },
+ .vsync_len = { 1, 1, 3 },
+};
+
+static const struct panel_desc auo_g070vvn01 = {
+ .timings = &auo_g070vvn01_timings,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .delay = {
+ .prepare = 200,
+ .enable = 50,
+ .disable = 50,
+ .unprepare = 1000,
+ },
+};
+
static const struct drm_display_mode auo_g104sn02_mode = {
.clock = 40000,
.hdisplay = 800,
}, {
.compatible = "auo,b133xtn01",
.data = &auo_b133xtn01,
+ }, {
+ .compatible = "auo,g070vvn01",
+ .data = &auo_g070vvn01,
}, {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,