powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers

This takes values from the PowerPC ISA BookIII-E specifications that are
for DBCR0. Many of these values are different from those currently
specified, which are for the ppc405. Also added some bookE definitions
for DBCR1 & DBCR2.

[ galak@kernel.crashing.org: Added aliases to 40x DBCR0 to match Book-E,
  Added enhanced debug DBCR0/DBSR _CIRPT and _CRET defines and DBSR
  IRPT and RET. ]

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
index cf54a3f31753895d44e32b18decd248c4380deb2..a1ab2ba8f1b22ddeca4d9283d76e8102e1c9e201 100644 (file)
--- a/include/asm-powerpc/reg_booke.h
+++ b/include/asm-powerpc/reg_booke.h
@@ -210,6 +210,7 @@
 #ifdef CONFIG_BOOKE
 #define DBSR_IC                0x08000000      /* Instruction Completion */
 #define DBSR_BT                0x04000000      /* Branch Taken */
+#define DBSR_IRPT      0x02000000      /* Exception Debug Event */
 #define DBSR_TIE       0x01000000      /* Trap Instruction Event */
 #define DBSR_IAC1      0x00800000      /* Instr Address Compare 1 Event */
 #define DBSR_IAC2      0x00400000      /* Instr Address Compare 2 Event */
@@ -219,10 +220,14 @@
 #define DBSR_DAC1W     0x00040000      /* Data Addr Compare 1 Write Event */
 #define DBSR_DAC2R     0x00020000      /* Data Addr Compare 2 Read Event */
 #define DBSR_DAC2W     0x00010000      /* Data Addr Compare 2 Write Event */
+#define DBSR_RET       0x00008000      /* Return Debug Event */
+#define DBSR_CIRPT     0x00000040      /* Critical Interrupt Taken Event */
+#define DBSR_CRET      0x00000020      /* Critical Return Debug Event */
 #endif
 #ifdef CONFIG_40x
 #define DBSR_IC                0x80000000      /* Instruction Completion */
 #define DBSR_BT                0x40000000      /* Branch taken */
+#define DBSR_IRPT      0x20000000      /* Exception Debug Event */
 #define DBSR_TIE       0x10000000      /* Trap Instruction debug Event */
 #define DBSR_IAC1      0x04000000      /* Instruction Address Compare 1 Event */
 #define DBSR_IAC2      0x02000000      /* Instruction Address Compare 2 Event */
@@ -253,6 +258,7 @@
 #define ESR_BO         0x00020000      /* Byte Ordering */
 
 /* Bit definitions related to the DBCR0. */
+#if defined(CONFIG_40x)
 #define DBCR0_EDM      0x80000000      /* External Debug Mode */
 #define DBCR0_IDM      0x40000000      /* Internal Debug Mode */
 #define DBCR0_RST      0x30000000      /* all the bits in the RST field */
@@ -261,20 +267,69 @@
 #define DBCR0_RST_CORE 0x10000000      /* Core Reset */
 #define DBCR0_RST_NONE 0x00000000      /* No Reset */
 #define DBCR0_IC       0x08000000      /* Instruction Completion */
+#define DBCR0_ICMP     DBCR0_IC
 #define DBCR0_BT       0x04000000      /* Branch Taken */
+#define DBCR0_BRT      DBCR0_BT
 #define DBCR0_EDE      0x02000000      /* Exception Debug Event */
+#define DBCR0_IRPT     DBCR0_EDE
 #define DBCR0_TDE      0x01000000      /* TRAP Debug Event */
 #define DBCR0_IA1      0x00800000      /* Instr Addr compare 1 enable */
+#define DBCR0_IAC1     DBCR0_IA1
 #define DBCR0_IA2      0x00400000      /* Instr Addr compare 2 enable */
+#define DBCR0_IAC2     DBCR0_IA2
 #define DBCR0_IA12     0x00200000      /* Instr Addr 1-2 range enable */
 #define DBCR0_IA12X    0x00100000      /* Instr Addr 1-2 range eXclusive */
 #define DBCR0_IA3      0x00080000      /* Instr Addr compare 3 enable */
+#define DBCR0_IAC3     DBCR0_IA3
 #define DBCR0_IA4      0x00040000      /* Instr Addr compare 4 enable */
+#define DBCR0_IAC4     DBCR0_IA4
 #define DBCR0_IA34     0x00020000      /* Instr Addr 3-4 range Enable */
 #define DBCR0_IA34X    0x00010000      /* Instr Addr 3-4 range eXclusive */
 #define DBCR0_IA12T    0x00008000      /* Instr Addr 1-2 range Toggle */
 #define DBCR0_IA34T    0x00004000      /* Instr Addr 3-4 range Toggle */
 #define DBCR0_FT       0x00000001      /* Freeze Timers on debug event */
+#elif defined(CONFIG_BOOKE)
+#define DBCR0_EDM      0x80000000      /* External Debug Mode */
+#define DBCR0_IDM      0x40000000      /* Internal Debug Mode */
+#define DBCR0_RST      0x30000000      /* all the bits in the RST field */
+/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
+#define DBCR0_RST_SYSTEM 0x30000000    /* System Reset */
+#define DBCR0_RST_CHIP 0x20000000      /* Chip Reset */
+#define DBCR0_RST_CORE 0x10000000      /* Core Reset */
+#define DBCR0_RST_NONE 0x00000000      /* No Reset */
+#define DBCR0_ICMP     0x08000000      /* Instruction Completion */
+#define DBCR0_IC       DBCR0_ICMP
+#define DBCR0_BRT      0x04000000      /* Branch Taken */
+#define DBCR0_BT       DBCR0_BRT
+#define DBCR0_IRPT     0x02000000      /* Exception Debug Event */
+#define DBCR0_TDE      0x01000000      /* TRAP Debug Event */
+#define DBCR0_TIE      DBCR0_TDE
+#define DBCR0_IAC1     0x00800000      /* Instr Addr compare 1 enable */
+#define DBCR0_IAC2     0x00400000      /* Instr Addr compare 2 enable */
+#define DBCR0_IAC3     0x00200000      /* Instr Addr compare 3 enable */
+#define DBCR0_IAC4     0x00100000      /* Instr Addr compare 4 enable */
+#define DBCR0_DAC1R    0x00080000      /* DAC 1 Read enable */
+#define DBCR0_DAC1W    0x00040000      /* DAC 1 Write enable */
+#define DBCR0_DAC2R    0x00020000      /* DAC 2 Read enable */
+#define DBCR0_DAC2W    0x00010000      /* DAC 2 Write enable */
+#define DBCR0_RET      0x00008000      /* Return Debug Event */
+#define DBCR0_CIRPT    0x00000040      /* Critical Interrupt Taken Event */
+#define DBCR0_CRET     0x00000020      /* Critical Return Debug Event */
+#define DBCR0_FT       0x00000001      /* Freeze Timers on debug event */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC12M   0x00800000      /* Instr Addr 1-2 range enable */
+#define DBCR1_IAC12MX  0x00C00000      /* Instr Addr 1-2 range eXclusive */
+#define DBCR1_IAC12AT  0x00010000      /* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC34M   0x00000080      /* Instr Addr 3-4 range enable */
+#define DBCR1_IAC34MX  0x000000C0      /* Instr Addr 3-4 range eXclusive */
+#define DBCR1_IAC34AT  0x00000001      /* Instr Addr 3-4 range Toggle */
+
+/* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC12M   0x00800000      /* DAC 1-2 range enable */
+#define DBCR2_DAC12MX  0x00C00000      /* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12A   0x00200000      /* DAC 1-2 Asynchronous */
+#endif
 
 /* Bit definitions related to the TCR. */
 #define TCR_WP(x)      (((x)&0x3)<<30) /* WDT Period */