--- /dev/null
+/*
+ * Reference to the ARM TF Project,
+ * plat/arm/common/arm_bl2_setup.c
+ * Portions copyright (c) 2013-2016, ARM Limited and Contributors. All rights
+ * reserved.
+ * Copyright (C) 2016 Rockchip Electronic Co.,Ltd
+ * Written by Kever Yang <kever.yang@rock-chips.com>
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common.h>
+#include <atf_common.h>
+#include <errno.h>
+#include <spl.h>
+
+static struct bl2_to_bl31_params_mem bl31_params_mem;
+static struct bl31_params *bl2_to_bl31_params;
+
+/**
+ * bl2_plat_get_bl31_params() - prepare params for bl31.
+ *
+ * This function assigns a pointer to the memory that the platform has kept
+ * aside to pass platform specific and trusted firmware related information
+ * to BL31. This memory is allocated by allocating memory to
+ * bl2_to_bl31_params_mem structure which is a superset of all the
+ * structure whose information is passed to BL31
+ * NOTE: This function should be called only once and should be done
+ * before generating params to BL31
+ *
+ * @return bl31 params structure pointer
+ */
+struct bl31_params *bl2_plat_get_bl31_params(void)
+{
+ struct entry_point_info *bl33_ep_info;
+
+ /*
+ * Initialise the memory for all the arguments that needs to
+ * be passed to BL31
+ */
+ memset(&bl31_params_mem, 0, sizeof(struct bl2_to_bl31_params_mem));
+
+ /* Assign memory for TF related information */
+ bl2_to_bl31_params = &bl31_params_mem.bl31_params;
+ SET_PARAM_HEAD(bl2_to_bl31_params, ATF_PARAM_BL31, ATF_VERSION_1, 0);
+
+ /* Fill BL31 related information */
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info,
+ ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0);
+
+ /* Fill BL32 related information if it exists */
+#ifdef BL32_BASE
+ bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, ATF_PARAM_EP,
+ ATF_VERSION_1, 0);
+ bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info,
+ ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0);
+#endif /* BL32_BASE */
+
+ /* Fill BL33 related information */
+ bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
+ bl33_ep_info = &bl31_params_mem.bl33_ep_info;
+ SET_PARAM_HEAD(bl33_ep_info, ATF_PARAM_EP, ATF_VERSION_1,
+ ATF_EP_NON_SECURE);
+
+ /* BL33 expects to receive the primary CPU MPID (through x0) */
+ bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
+ bl33_ep_info->pc = CONFIG_SYS_TEXT_BASE;
+ bl33_ep_info->spsr = SPSR_64(MODE_EL2, MODE_SP_ELX,
+ DISABLE_ALL_EXECPTIONS);
+
+ bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info,
+ ATF_PARAM_IMAGE_BINARY, ATF_VERSION_1, 0);
+
+ return bl2_to_bl31_params;
+}
+
+void raw_write_daif(unsigned int daif)
+{
+ __asm__ __volatile__("msr DAIF, %0\n\t" : : "r" (daif) : "memory");
+}
+
+void bl31_entry(void)
+{
+ struct bl31_params *bl31_params;
+ void (*entry)(struct bl31_params *params, void *plat_params) = NULL;
+
+ bl31_params = bl2_plat_get_bl31_params();
+ entry = (void *)CONFIG_SPL_ATF_TEXT_BASE;
+
+ raw_write_daif(SPSR_EXCEPTION_MASK);
+ dcache_disable();
+
+ entry(bl31_params, NULL);
+}
--- /dev/null
+/*
+ * This is from the ARM TF Project,
+ * Repository: https://github.com/ARM-software/arm-trusted-firmware.git
+ * File: include/common/bl_common.h
+ * Portions copyright (c) 2013-2016, ARM Limited and Contributors. All rights
+ * reserved.
+ * Copyright (C) 2016-2017 Rockchip Electronic Co.,Ltd
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __BL_COMMON_H__
+#define __BL_COMMON_H__
+
+#define ATF_PARAM_EP 0x01
+#define ATF_PARAM_IMAGE_BINARY 0x02
+#define ATF_PARAM_BL31 0x03
+
+#define ATF_VERSION_1 0x01
+
+#define ATF_EP_SECURE 0x0
+#define ATF_EP_NON_SECURE 0x1
+
+#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
+ (_p)->h.type = (uint8_t)(_type); \
+ (_p)->h.version = (uint8_t)(_ver); \
+ (_p)->h.size = (uint16_t)sizeof(*_p); \
+ (_p)->h.attr = (uint32_t)(_attr) ; \
+ } while (0)
+
+#define MODE_RW_SHIFT 0x4
+#define MODE_RW_MASK 0x1
+#define MODE_RW_64 0x0
+#define MODE_RW_32 0x1
+
+#define MODE_EL_SHIFT 0x2
+#define MODE_EL_MASK 0x3
+#define MODE_EL3 0x3
+#define MODE_EL2 0x2
+#define MODE_EL1 0x1
+#define MODE_EL0 0x0
+
+#define MODE_SP_SHIFT 0x0
+#define MODE_SP_MASK 0x1
+#define MODE_SP_EL0 0x0
+#define MODE_SP_ELX 0x1
+
+#define SPSR_DAIF_SHIFT 6
+#define SPSR_DAIF_MASK 0x0f
+
+#define SPSR_64(el, sp, daif) \
+ (MODE_RW_64 << MODE_RW_SHIFT | \
+ ((el) & MODE_EL_MASK) << MODE_EL_SHIFT | \
+ ((sp) & MODE_SP_MASK) << MODE_SP_SHIFT | \
+ ((daif) & SPSR_DAIF_MASK) << SPSR_DAIF_SHIFT)
+
+#define SPSR_FIQ (1 << 6)
+#define SPSR_IRQ (1 << 7)
+#define SPSR_SERROR (1 << 8)
+#define SPSR_DEBUG (1 << 9)
+#define SPSR_EXCEPTION_MASK (SPSR_FIQ | SPSR_IRQ | SPSR_SERROR | SPSR_DEBUG)
+
+#define DAIF_FIQ_BIT (1<<0)
+#define DAIF_IRQ_BIT (1<<1)
+#define DAIF_ABT_BIT (1<<2)
+#define DAIF_DBG_BIT (1<<3)
+#define DISABLE_ALL_EXECPTIONS \
+ (DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT | DAIF_DBG_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*******************************************************************************
+ * Structure used for telling the next BL how much of a particular type of
+ * memory is available for its use and how much is already used.
+ ******************************************************************************/
+struct aapcs64_params {
+ unsigned long arg0;
+ unsigned long arg1;
+ unsigned long arg2;
+ unsigned long arg3;
+ unsigned long arg4;
+ unsigned long arg5;
+ unsigned long arg6;
+ unsigned long arg7;
+};
+
+/***************************************************************************
+ * This structure provides version information and the size of the
+ * structure, attributes for the structure it represents
+ ***************************************************************************/
+struct param_header {
+ uint8_t type; /* type of the structure */
+ uint8_t version; /* version of this structure */
+ uint16_t size; /* size of this structure in bytes */
+ uint32_t attr; /* attributes: unused bits SBZ */
+};
+
+/*****************************************************************************
+ * This structure represents the superset of information needed while
+ * switching exception levels. The only two mechanisms to do so are
+ * ERET & SMC. Security state is indicated using bit zero of header
+ * attribute
+ * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start
+ * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while
+ * processing SMC to jump to BL31.
+ *****************************************************************************/
+struct entry_point_info {
+ struct param_header h;
+ uintptr_t pc;
+ uint32_t spsr;
+ struct aapcs64_params args;
+};
+
+/*****************************************************************************
+ * Image info binary provides information from the image loader that
+ * can be used by the firmware to manage available trusted RAM.
+ * More advanced firmware image formats can provide additional
+ * information that enables optimization or greater flexibility in the
+ * common firmware code
+ *****************************************************************************/
+struct atf_image_info {
+ struct param_header h;
+ uintptr_t image_base; /* physical address of base of image */
+ uint32_t image_size; /* bytes read from image file */
+};
+
+/*****************************************************************************
+ * The image descriptor struct definition.
+ *****************************************************************************/
+struct image_desc {
+ /* Contains unique image id for the image. */
+ unsigned int image_id;
+ /*
+ * This member contains Image state information.
+ * Refer IMAGE_STATE_XXX defined above.
+ */
+ unsigned int state;
+ uint32_t copied_size; /* image size copied in blocks */
+ struct atf_image_info atf_image_info;
+ struct entry_point_info ep_info;
+};
+
+/*******************************************************************************
+ * This structure represents the superset of information that can be passed to
+ * BL31 e.g. while passing control to it from BL2. The BL32 parameters will be
+ * populated only if BL2 detects its presence. A pointer to a structure of this
+ * type should be passed in X0 to BL31's cold boot entrypoint.
+ *
+ * Use of this structure and the X0 parameter is not mandatory: the BL31
+ * platform code can use other mechanisms to provide the necessary information
+ * about BL32 and BL33 to the common and SPD code.
+ *
+ * BL31 image information is mandatory if this structure is used. If either of
+ * the optional BL32 and BL33 image information is not provided, this is
+ * indicated by the respective image_info pointers being zero.
+ ******************************************************************************/
+struct bl31_params {
+ struct param_header h;
+ struct atf_image_info *bl31_image_info;
+ struct entry_point_info *bl32_ep_info;
+ struct atf_image_info *bl32_image_info;
+ struct entry_point_info *bl33_ep_info;
+ struct atf_image_info *bl33_image_info;
+};
+
+/*******************************************************************************
+ * This structure represents the superset of information that is passed to
+ * BL31, e.g. while passing control to it from BL2, bl31_params
+ * and other platform specific params
+ ******************************************************************************/
+struct bl2_to_bl31_params_mem {
+ struct bl31_params bl31_params;
+ struct atf_image_info bl31_image_info;
+ struct atf_image_info bl32_image_info;
+ struct atf_image_info bl33_image_info;
+ struct entry_point_info bl33_ep_info;
+ struct entry_point_info bl32_ep_info;
+ struct entry_point_info bl31_ep_info;
+};
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* __BL_COMMON_H__ */
projects / project / bcm63xx / u-boot.git / commitdiff