--- /dev/null
+/*
+ * NETGEAR WNDR4300 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WNDR4300_GPIO_LED_POWER_GREEN 0
+#define WNDR4300_GPIO_LED_POWER_ORANGE 2
+#define WNDR4300_GPIO_LED_USB 13
+#define WNDR4300_GPIO_LED_WAN_GREEN 1
+#define WNDR4300_GPIO_LED_WAN_ORANGE 3
+#define WNDR4300_GPIO_LED_WLAN5G 14
+#define WNDR4300_GPIO_LED_WPS_GREEN 16
+#define WNDR4300_GPIO_LED_WPS_ORANGE 17
+
+#define WNDR4300_GPIO_BTN_RESET 21
+#define WNDR4300_GPIO_BTN_WIRELESS 15
+#define WNDR4300_GPIO_BTN_WPS 12
+
+#define WNDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WNDR4300_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wndr4300_leds_gpio[] __initdata = {
+ {
+ .name = "netgear:green:power",
+ .gpio = WNDR4300_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:orange:power",
+ .gpio = WNDR4300_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wan",
+ .gpio = WNDR4300_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:orange:wan",
+ .gpio = WNDR4300_GPIO_LED_WAN_ORANGE,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:usb",
+ .gpio = WNDR4300_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wps",
+ .gpio = WNDR4300_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:orange:wps",
+ .gpio = WNDR4300_GPIO_LED_WPS_ORANGE,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:blue:wlan5g",
+ .gpio = WNDR4300_GPIO_LED_WLAN5G,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wndr4300_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4300_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4300_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Wireless button",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR4300_GPIO_BTN_WIRELESS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg wndr4300_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wndr4300_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data wndr4300_ar8327_data = {
+ .pad0_cfg = &wndr4300_ar8327_pad0_cfg,
+ .cpuport_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wndr4300_ar8327_led_cfg,
+};
+
+static struct mdio_board_info wndr4300_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wndr4300_ar8327_data,
+ },
+};
+
+static void __init wndr4300_setup(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
+ wndr4300_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndr4300_gpio_keys),
+ wndr4300_gpio_keys);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(wndr4300_mdio0_info,
+ ARRAY_SIZE(wndr4300_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_register_nfc();
+ ath79_register_usb();
+
+ ath79_register_wmac_simple();
+ ap91_pci_init_simple();
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDR4300, "WNDR4300", "NETGEAR WNDR4300",
+ wndr4300_setup);
--- /dev/null
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -354,6 +354,17 @@ config ATH79_MACH_WNDR3700
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
++config ATH79_MACH_WNDR4300
++ bool "NETGEAR WNDR4300 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_NFC
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WNR2000
+ bool "NETGEAR WNR2000 board support"
+ select SOC_AR913X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -106,6 +106,7 @@ enum ath79_mach_type {
+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach
+ obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+ obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
+ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
+ obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
+ obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+ obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
--- /dev/null
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -354,6 +354,17 @@ config ATH79_MACH_WNDR3700
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
++config ATH79_MACH_WNDR4300
++ bool "NETGEAR WNDR4300 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_NFC
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WNR2000
+ bool "NETGEAR WNR2000 board support"
+ select SOC_AR913X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -106,6 +106,7 @@ enum ath79_mach_type {
+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach
+ obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
+ obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
+ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
+ obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
+ obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+ obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
projects / openwrt / openwrt.git / commitdiff