--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7100.dtsi"
+
+/ {
+ aliases {
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_orange;
+ label-mac-device = ð0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "ref";
+ clock-frequency = <40000000>;
+ };
+
+ reset-leds {
+ compatible = "reset-leds";
+
+ usb_led {
+ label = "netgear:green:usb";
+ resets = <&rst 12>;
+ trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "netgear:orange:wps";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "netgear:green:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_orange: power_orange {
+ label = "netgear:orange:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wps_green {
+ label = "netgear:green:wps";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_green {
+ label = "netgear:green:wan";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ wlan2g {
+ label = "netgear:green:wlan2g";
+ gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ wlan5g {
+ label = "netgear:blue:wlan5g";
+ gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ rtl8366s {
+ compatible = "realtek,rtl8366s";
+
+ gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ohci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ usb_ehci_port: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ ath9k0: wifi@0,11 {
+ compatible = "pci168c,0029";
+ reg = <0x8800 0 0 0 0>;
+ mtd-mac-address = <&art 0x0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ /* all WNDR3700 variants have four antennae dedicated
+ * to the 2.4GHz radio. Two antennae are available for
+ * each chain. The following configuration is the
+ * default setting which taken from the vendor's wifi
+ * code for that radio.
+ *
+ * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
+ * [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
+ */
+ antenna-demux {
+ gpio-hog;
+ line-name = "fixed antenna group 1";
+ gpios = <6 GPIO_ACTIVE_LOW>,
+ <7 GPIO_ACTIVE_HIGH>,
+ <8 GPIO_ACTIVE_LOW>,
+ <9 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+
+ ath9k1: wifi@0,12 {
+ compatible = "pci168c,0029";
+ reg = <0x9000 0 0 0 0>;
+ mtd-mac-address = <&art 0xc>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x11110000 0x00001099 0x00991099>;
+
+ mtd-mac-address = <&art 0x00>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x11110000 0x00001099 0x00991099>;
+
+ mtd-mac-address = <&art 0x06>;
+
+ phy-handle = <&phy4>;
+};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include "ar7161_netgear_wndr3700.dtsi"
+#include "ar7161_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr3700-v2", "qca,ar7161";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include "ar7161_netgear_wndr3700.dtsi"
+#include "ar7161_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr3700", "qca,ar7161";
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
-
-/ {
- aliases {
- led-boot = &led_power_orange;
- led-failsafe = &led_power_orange;
- led-running = &led_power_green;
- led-upgrade = &led_power_orange;
- label-mac-device = ð0;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- reset-leds {
- compatible = "reset-leds";
-
- usb_led {
- label = "netgear:green:usb";
- resets = <&rst 12>;
- trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
- linux,default-trigger = "usbport";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "netgear:orange:wps";
- gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power_green {
- label = "netgear:green:power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- led_power_orange: power_orange {
- label = "netgear:orange:power";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- wps_green {
- label = "netgear:green:wps";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- wan_green {
- label = "netgear:green:wan";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- ath9k-leds {
- compatible = "gpio-leds";
-
- wlan2g {
- label = "netgear:green:wlan2g";
- gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
- wlan5g {
- label = "netgear:blue:wlan5g";
- gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- rfkill {
- label = "rfkill";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
- };
-
- rtl8366s {
- compatible = "realtek,rtl8366s";
-
- gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
- gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- phy-mask = <0x10>;
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ohci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ehci_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-
- ath9k0: wifi@0,11 {
- compatible = "pci168c,0029";
- reg = <0x8800 0 0 0 0>;
- mtd-mac-address = <&art 0x0>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
-
- /* all WNDR3700 variants have four antennae dedicated
- * to the 2.4GHz radio. Two antennae are available for
- * each chain. The following configuration is the
- * default setting which taken from the vendor's wifi
- * code for that radio.
- *
- * All possible options [GPIO6,GPIO7,GPIO8,GPIO9]:
- * [0,1,0,1], [0,1,1,0], [1,0,0,1], [1,0,1,0]
- */
- antenna-demux {
- gpio-hog;
- line-name = "fixed antenna group 1";
- gpios = <6 GPIO_ACTIVE_LOW>,
- <7 GPIO_ACTIVE_HIGH>,
- <8 GPIO_ACTIVE_LOW>,
- <9 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-
- ath9k1: wifi@0,12 {
- compatible = "pci168c,0029";
- reg = <0x9000 0 0 0 0>;
- mtd-mac-address = <&art 0xc>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
-
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions: partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- pll-data = <0x11110000 0x00001099 0x00991099>;
-
- mtd-mac-address = <&art 0x00>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-ð1 {
- status = "okay";
-
- pll-data = <0x11110000 0x00001099 0x00991099>;
-
- mtd-mac-address = <&art 0x06>;
-
- phy-handle = <&phy4>;
-};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include "ar7161_netgear_wndr3700.dtsi"
+#include "ar7161_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr3800", "qca,ar7161";
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include "ar7161_netgear_wndr3700.dtsi"
+#include "ar7161_netgear_wndr.dtsi"
/ {
compatible = "netgear,wndr3800ch", "qca,ar7161";
projects / openwrt / staging / adrian.git / commitdiff