outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/************************/
-/* Set the reload value */
-/************************/
+ /************************/
+ /* Set the reload value */
+ /************************/
outl(data[3], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 4);
-/*********************/
-/* Set the time unit */
-/*********************/
+ /*********************/
+ /* Set the time unit */
+ /*********************/
outl(data[2], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 8);
if (data[0] == ADDIDATA_TIMER) {
- /******************************/
+ /******************************/
/* Set the mode : */
/* - Disable the hardware */
/* - Disable the counter mode */
/* - Disable the reset */
/* - Enable the timer mode */
/* - Set the timer mode */
- /******************************/
+ /******************************/
ui_Command =
(ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
else {
if (data[0] == ADDIDATA_WATCHDOG) {
- /******************************/
+ /******************************/
/* Set the mode : */
/* - Disable the hardware */
/* - Disable the counter mode */
/* - Disable the warning */
/* - Disable the reset */
/* - Disable the timer mode */
- /******************************/
+ /******************************/
ui_Command = ui_Command & 0xFFF819E2UL;
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/********************************/
-/* Disable the hardware trigger */
-/********************************/
+ /********************************/
+ /* Disable the hardware trigger */
+ /********************************/
ui_Command = ui_Command & 0xFFFFF89FUL;
if (data[4] == ADDIDATA_ENABLE) {
- /**********************************/
+ /**********************************/
/* Set the hardware trigger level */
- /**********************************/
+ /**********************************/
ui_Command = ui_Command | (data[5] << 5);
}
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/*****************************/
-/* Disable the hardware gate */
-/*****************************/
+ /*****************************/
+ /* Disable the hardware gate */
+ /*****************************/
ui_Command = ui_Command & 0xFFFFF87FUL;
if (data[6] == ADDIDATA_ENABLE) {
-/*******************************/
-/* Set the hardware gate level */
-/*******************************/
+ /*******************************/
+ /* Set the hardware gate level */
+ /*******************************/
ui_Command = ui_Command | (data[7] << 7);
}
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/*******************************/
-/* Disable the hardware output */
-/*******************************/
+ /*******************************/
+ /* Disable the hardware output */
+ /*******************************/
ui_Command = ui_Command & 0xFFFFF9FBUL;
-/*********************************/
-/* Set the hardware output level */
-/*********************************/
+ /*********************************/
+ /* Set the hardware output level */
+ /*********************************/
ui_Command = ui_Command | (data[8] << 2);
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
if (data[9] == ADDIDATA_ENABLE) {
- /************************/
+ /************************/
/* Set the reload value */
- /************************/
+ /************************/
outl(data[11],
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 24);
- /**********************/
+ /**********************/
/* Set the time unite */
- /**********************/
+ /**********************/
outl(data[10],
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 28);
}
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- /*******************************/
+ /*******************************/
/* Disable the hardware output */
- /*******************************/
+ /*******************************/
ui_Command = ui_Command & 0xFFFFF9F7UL;
- /*********************************/
+ /*********************************/
/* Set the hardware output level */
- /*********************************/
+ /*********************************/
ui_Command = ui_Command | (data[12] << 3);
outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- /*************************************/
- /** Enable the watchdog interrupt **/
- /*************************************/
+ /*************************************/
+ /** Enable the watchdog interrupt **/
+ /*************************************/
ui_Command = 0;
ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/*******************************/
-/* Set the interrupt selection */
-/*******************************/
+ /*******************************/
+ /* Set the interrupt selection */
+ /*******************************/
ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16);
ui_Command = (ui_Command & 0xFFFFF9FDUL) | (data[13] << 1);
if (data[0] == 1) {
ui_Command =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- /**********************/
+ /**********************/
/* Start the hardware */
- /**********************/
+ /**********************/
ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x1UL;
outl(ui_Command,
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
if (data[0] == 2) {
ui_Command =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- /***************************/
+ /***************************/
/* Set the trigger command */
- /***************************/
+ /***************************/
ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x200UL;
outl(ui_Command,
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
if (data[0] == 0) {
/* Stop The Watchdog */
ui_Command = 0;
-/*
-* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
-* ui_Command = ui_Command & 0xFFFFF9FEUL;
-*/
+ /*
+ * ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
+ * ui_Command = ui_Command & 0xFFFFF9FEUL;
+ */
outl(ui_Command,
devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
} /* if (data[1]==0) */
devpriv->tsk_Current = current;
outl(0x200 | 0, devpriv->iobase + 128 + 0x4);
outl(0, devpriv->iobase + 128 + 0);
-/********************************/
-/* Initialise the warning value */
-/********************************/
+ /********************************/
+ /* Initialise the warning value */
+ /********************************/
outl(0x300 | 0, devpriv->iobase + 128 + 0x4);
outl((data[0] << 8), devpriv->iobase + 128 + 0);
outl(0x200000UL, devpriv->iobase + 128 + 12);
struct addi_private *devpriv = dev->private;
unsigned int ui_CommandRegister = 0;
-/******************/
-/* Set the start */
-/******************/
+ /******************/
+ /* Set the start */
+ /******************/
ui_CommandRegister = 0x80000;
- /******************************/
+ /******************************/
/* Write the command register */
- /******************************/
+ /******************************/
outl(ui_CommandRegister, devpriv->iobase + 128 + 8);
-/***************************************/
-/* Read the digital value of the input */
-/***************************************/
+ /***************************************/
+ /* Read the digital value of the input */
+ /***************************************/
data[0] = inl(devpriv->iobase + 128 + 28);
return insn->n;
}
i_WatchdogNbr = i_Flag;
i_Flag = i_Flag + 1;
}
- /**************************************/
+ /**************************************/
/* Read the interrupt status register of temperature Warning */
- /**************************************/
+ /**************************************/
ui_StatusRegister1 = inl(devpriv->iobase + 128 + 16);
- /**************************************/
+ /**************************************/
/* Read the interrupt status register for Watchdog/timer */
- /**************************************/
+ /**************************************/
ui_StatusRegister2 =
inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 20);
/* Test if warning relay interrupt */
if ((((ui_StatusRegister1) & 0x8) == 0x8)) {
- /**********************************/
+ /**********************************/
/* Disable the temperature warning */
- /**********************************/
+ /**********************************/
ui_ReadCommand = inl(devpriv->iobase + 128 + 12);
ui_ReadCommand = ui_ReadCommand & 0xFFDF0000UL;
outl(ui_ReadCommand, devpriv->iobase + 128 + 12);
- /***************************/
+ /***************************/
/* Read the channel number */
- /***************************/
+ /***************************/
ui_ChannelNumber = inl(devpriv->iobase + 128 + 60);
- /**************************************/
+ /**************************************/
/* Read the digital temperature value */
- /**************************************/
+ /**************************************/
ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60);
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
} /* if (((ui_StatusRegister1 & 0x8) == 0x8)) */