int sr;
bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM;
- printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
-
/* Bogus probing, on the models which may or may not have
Ethernet (BTW, the Ethernet *is* always at the same
address, and nothing else lives there, at least if Apple's
card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
if (!card_present) {
- printk("none.\n");
+ pr_info("Onboard/comm-slot SONIC not found\n");
return -ENODEV;
}
}
- printk("yes\n");
-
/* Danger! My arms are flailing wildly! You *must* set lp->reg_offset
* and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
dev->base_addr = ONBOARD_SONIC_REGISTERS;
printk(KERN_INFO "%s", version);
sonic_version_printed = 1;
}
- printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
- dev_name(lp->device), dev->base_addr);
/* The PowerBook's SONIC is 16 bit always. */
if (macintosh_config->ident == MAC_MODEL_PB520) {
lp->reg_offset = 0;
lp->dma_bitmode = SONIC_BITMODE16;
- sr = SONIC_READ(SONIC_SR);
} else if (commslot) {
/* Some of the comm-slot cards are 16 bit. But some
of them are not. The 32-bit cards use offset 2 and
else {
lp->dma_bitmode = SONIC_BITMODE16;
lp->reg_offset = 0;
- sr = SONIC_READ(SONIC_SR);
}
} else {
/* All onboard cards are at offset 2 with 32 bit DMA. */
lp->reg_offset = 2;
lp->dma_bitmode = SONIC_BITMODE32;
- sr = SONIC_READ(SONIC_SR);
}
- printk(KERN_INFO
- "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
- dev_name(lp->device), sr, lp->dma_bitmode?32:16, lp->reg_offset);
-#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
- printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
- SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
-#endif
+ pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n",
+ SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16,
+ lp->reg_offset);
+
+ /* This is sometimes useful to find out how MacOS configured the card */
+ pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+ SONIC_READ(SONIC_DCR) & 0xffff,
+ SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
/* Now look for the MAC address. */
mac_onboard_sonic_ethernet_addr(dev);
+ pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+ dev->base_addr, dev->dev_addr, dev->irq);
+
/* Shared init code */
return macsonic_init(dev);
}
printk(KERN_INFO "%s", version);
sonic_version_printed = 1;
}
- printk(KERN_INFO "%s: %s in slot %X\n",
- dev_name(lp->device), board->name, board->slot);
- printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
- dev_name(lp->device), SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
-
-#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
- printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", dev_name(lp->device),
- SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
-#endif
+
+ dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n",
+ board->name, SONIC_READ(SONIC_SR),
+ lp->dma_bitmode ? 32 : 16, lp->reg_offset);
+
+ /* This is sometimes useful to find out how MacOS configured the card */
+ dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+ SONIC_READ(SONIC_DCR) & 0xffff,
+ SONIC_READ(SONIC_DCR2) & 0xffff);
/* Software reset, then initialize control registers. */
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
if (err)
goto out;
- printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
-
return 0;
out: