staging: mt7621-pci: remove some dead code.

Some code is dead because it is commented out.
Some is dead because it is uninteresting printks.
Some is dead because it declares unused functions.

Remove it all.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 5094e90eaf6933c65553f5d9010ff1c20faed6e2..edd95013faf3d90483be3305c3c3699c82868a3f 100644 (file)
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -56,9 +56,6 @@
 
 #include <ralink_regs.h>
 
-extern void pcie_phy_init(void);
-extern void chk_phy_pll(void);
-
 /*
  * These functions and structures provide the BIOS scan and mapping of the PCI
  * devices.
@@ -364,11 +361,8 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 void
 set_pcie_phy(u32 *addr, int start_b, int bits, int val)
 {
-//     printk("0x%p:", addr);
-//     printk(" %x", *addr);
        *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
        *(unsigned int *)(addr) |= val << start_b;
-//     printk(" -> %x\n", *addr);
 }
 
 void
@@ -497,7 +491,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
        val |= RALINK_PCIE2_RST;
 
        ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST);
-       printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
        *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
        *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
@@ -513,12 +506,10 @@ static int mt7621_pci_probe(struct platform_device *pdev)
        val |= RALINK_PCIE2_RST;
 
        DEASSERT_SYSRST_PCIE(val);
-       printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
        if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
                bypass_pipe_rst();
        set_phy_for_ssc();
-       printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL);
 
        read_config(0, 0, 0, 0x70c, &val);
        printk("Port 0 N_FTS = %x\n", (unsigned int)val);
@@ -614,8 +605,6 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
                RALINK_PCI_PCICFG_ADDR |= 0x1 << 24;    //port2
                break;
        }
-       printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR);
-       //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL);
 
 /*
        ioport_resource.start = mt7621_res_pci_io1.start;
@@ -653,7 +642,6 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
        case 7:
                read_config(0, 2, 0, 0x4, &val);
                write_config(0, 2, 0, 0x4, val|0x4);
-               // write_config(0, 1, 0, 0x4, val|0x7);
                read_config(0, 2, 0, 0x70c, &val);
                val &= ~(0xff)<<8;
                val |= 0x50<<8;
@@ -663,7 +651,6 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
        case 6:
                read_config(0, 1, 0, 0x4, &val);
                write_config(0, 1, 0, 0x4, val|0x4);
-               // write_config(0, 1, 0, 0x4, val|0x7);
                read_config(0, 1, 0, 0x70c, &val);
                val &= ~(0xff)<<8;
                val |= 0x50<<8;
@@ -671,7 +658,6 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
        default:
                read_config(0, 0, 0, 0x4, &val);
                write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
-               // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable
                read_config(0, 0, 0, 0x70c, &val);
                val &= ~(0xff)<<8;
                val |= 0x50<<8;