--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "vr9_avm_fritzxx90.dtsi"
+
+/ {
+ compatible = "avm,fritz7490", "lantiq,xway", "lantiq,vr9";
+ model = "AVM FRITZ!Box 7490";
+};
+
+&aliases {
+ led-dsl = &led_info_green;
+ led-internet = &led_internet;
+ led-wifi = &led_wifi;
+};
+
+&leds {
+ led_internet: internet {
+ label = "green:internet";
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+ };
+
+ led_fon: fon {
+ label = "green:fon";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wifi: wifi {
+ label = "green:wlan";
+ gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gswip_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0x00>;
+ reset-gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x01>;
+ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&gswip_ports {
+ port@0 {
+ reg = <0>;
+ label = "lan3";
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan4";
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&phy1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan1";
+ phy-mode = "internal";
+ phy-handle = <&phy13>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ aliases: aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_info_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_info_red;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ led_info_green: info_green {
+ label = "green:info";
+ gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+ };
+
+ led_info_red: info_red {
+ label = "red:info";
+ gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gphy0 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+ lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+ gpio-ranges = <&gpio 0 0 56>;
+
+ state_default: pinmux {
+ phy-rst {
+ lantiq,pins = "io32", "io44";
+ lantiq,pull = <0>;
+ lantiq,open-drain;
+ lantiq,output = <1>;
+ };
+
+ pcie-rst {
+ lantiq,pins = "io21";
+ lantiq,open-drain;
+ lantiq,output = <1>;
+ };
+ };
+
+ usb-vbus {
+ gpio-hog;
+ line-name = "usb-vbus";
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ pcie-enable-dev {
+ gpio-hog;
+ line-name = "pcie-enable-dev";
+ gpios = <22 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+};
+
+&gswip {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+};
+
+&spi {
+ status = "okay";
+
+ flash@4 {
+ compatible = "jedec,spi-nor";
+ reg = <4>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ urlader: partition@0 {
+ reg = <0x0 0x40000>;
+ label = "urlader";
+ read-only;
+ };
+
+ partition@40000 {
+ reg = <0x40000 0x60000>;
+ label = "tffs (1)";
+ read-only;
+ };
+
+ partition@a0000 {
+ reg = <0xa0000 0x60000>;
+ label = "tffs (2)";
+ read-only;
+ };
+ };
+ };
+};
+
+&localbus {
+ nand1: nand@1 {
+ compatible = "lantiq,nand-xway";
+ bank-width = <2>;
+ reg = <0x1 0x0 0x2000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x1fc00000>;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
+ lantiq,switch-pcie-endianess;
+};
endef
TARGET_DEVICES += avm_fritz7430
+define Device/avm_fritz7490
+ $(Device/dsa-migration)
+ $(Device/AVM)
+ $(Device/NAND)
+ DEVICE_MODEL := FRITZ!Box 7490
+ DEVICE_VARIANT := Other NAND
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 49152k
+ DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader
+endef
+TARGET_DEVICES += avm_fritz7490
+
+define Device/avm_fritz7490-micron
+ $(Device/dsa-migration)
+ $(Device/AVM)
+ $(Device/NAND)
+ DEVICE_MODEL := FRITZ!Box 7490
+ DEVICE_VARIANT := Micron NAND
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 49152k
+ DEVICE_PACKAGES := kmod-usb3 fritz-tffs -kmod-owl-loader
+endef
+TARGET_DEVICES += avm_fritz7490-micron
+
define Device/bt_homehub-v5a
$(Device/dsa-migration)
$(Device/NAND)
projects / openwrt / staging / dangole.git / commitdiff