Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
+config PALM_TREO
+ bool
+ depends on ARCH_PXA_PALM
+
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
+ select PALM_TREO
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
-obj-$(CONFIG_MACH_TREO680) += treo680.o
+obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
--- /dev/null
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT 0
+#define GPIO_NR_TREO_AMP_EN 27
+#define GPIO_NR_TREO_GREEN_LED 20
+#define GPIO_NR_TREO_RED_LED 79
+#define GPIO_NR_TREO_SD_DETECT_N 113
+#define GPIO_NR_TREO_EP_DETECT_N 116
+#define GPIO_NR_TREO_USB_DETECT 1
+#define GPIO_NR_TREO_USB_PULLUP 114
+#define GPIO_NR_TREO_GSM_POWER 40
+#define GPIO_NR_TREO_GSM_RESET 87
+#define GPIO_NR_TREO_GSM_WAKE 57
+#define GPIO_NR_TREO_GSM_HOST_WAKE 14
+#define GPIO_NR_TREO_GSM_TRIGGER 10
+#define GPIO_NR_TREO_IR_EN 115
+#define GPIO_NR_TREO_IR_TXD 47
+#define GPIO_NR_TREO_BL_POWER 38
+#define GPIO_NR_TREO_LCD_POWER 25
+
+/* Treo680 specific GPIOs */
+#ifdef CONFIG_MACH_TREO680
+#define GPIO_NR_TREO680_SD_READONLY 33
+#define GPIO_NR_TREO680_SD_POWER 42
+#define GPIO_NR_TREO680_VIBRATE_EN 44
+#define GPIO_NR_TREO680_KEYB_BL 24
+#define GPIO_NR_TREO680_BT_EN 43
+#endif /* CONFIG_MACH_TREO680 */
+
+/* Various addresses */
+#define TREO_PHYS_RAM_START 0xa0000000
+#define TREO_PHYS_IO_START 0x40000000
+#define TREO_STR_BASE 0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY 254
+#define TREO_DEFAULT_INTENSITY 160
+#define TREO_LIMIT_MASK 0x7F
+#define TREO_PRESCALER 63
+#define TREO_PERIOD_NS 3500
+
+#endif
+++ /dev/null
-/*
- * GPIOs and interrupts for Palm Treo 680 smartphone
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_TREO680_H_
-#define _INCLUDE_TREO680_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO680_POWER_DETECT 0
-#define GPIO_NR_TREO680_AMP_EN 27
-#define GPIO_NR_TREO680_KEYB_BL 24
-#define GPIO_NR_TREO680_VIBRATE_EN 44
-#define GPIO_NR_TREO680_GREEN_LED 20
-#define GPIO_NR_TREO680_RED_LED 79
-#define GPIO_NR_TREO680_SD_DETECT_N 113
-#define GPIO_NR_TREO680_SD_READONLY 33
-#define GPIO_NR_TREO680_EP_DETECT_N 116
-#define GPIO_NR_TREO680_SD_POWER 42
-#define GPIO_NR_TREO680_USB_DETECT 1
-#define GPIO_NR_TREO680_USB_PULLUP 114
-#define GPIO_NR_TREO680_GSM_POWER 40
-#define GPIO_NR_TREO680_GSM_RESET 87
-#define GPIO_NR_TREO680_GSM_WAKE 57
-#define GPIO_NR_TREO680_GSM_HOST_WAKE 14
-#define GPIO_NR_TREO680_GSM_TRIGGER 10
-#define GPIO_NR_TREO680_BT_EN 43
-#define GPIO_NR_TREO680_IR_EN 115
-#define GPIO_NR_TREO680_IR_TXD 47
-#define GPIO_NR_TREO680_BL_POWER 38
-#define GPIO_NR_TREO680_LCD_POWER 25
-
-/* Various addresses */
-#define TREO680_PHYS_RAM_START 0xa0000000
-#define TREO680_PHYS_IO_START 0x40000000
-#define TREO680_STR_BASE 0xa2000000
-
-/* BACKLIGHT */
-#define TREO680_MAX_INTENSITY 254
-#define TREO680_DEFAULT_INTENSITY 160
-#define TREO680_LIMIT_MASK 0x7F
-#define TREO680_PRESCALER 63
-#define TREO680_PERIOD_NS 3500
-
-#endif
--- /dev/null
+/*
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+#include <linux/sysdev.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/palmtreo.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/palmasoc.h>
+#include <mach/camera.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long treo_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO113_GPIO, /* SD detect */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
+
+ /* MATRIX KEYPAD */
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO98_KP_MKIN_4,
+ GPIO91_KP_MKIN_6,
+ GPIO13_KP_MKIN_7,
+ GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* Quick Capture Interface */
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GSM */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO39_FFUART_TXD,
+ GPIO41_FFUART_RTS,
+
+ /* MISC. */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
+ GPIO116_GPIO, /* headphone detect */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
+};
+
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+ GPIO33_GPIO, /* SD read only */
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct pxamci_platform_data treo680_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
+ .gpio_power = GPIO_NR_TREO680_SD_POWER,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static unsigned int treo680_matrix_keys[] = {
+ KEY(0, 0, KEY_F8), /* Red/Off/Power */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F9), /* Home */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 7,
+ .matrix_key_map = treo680_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
+ .direct_key_map = { KEY_CONNECT },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+
+static pxa2xx_audio_ops_t treo_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int treo_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_TREO_BL_POWER);
+err:
+ return ret;
+}
+
+static int treo_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
+ return TREO_MAX_INTENSITY - brightness;
+};
+
+static void treo_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data treo_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = TREO_MAX_INTENSITY,
+ .dft_brightness = TREO_DEFAULT_INTENSITY,
+ .pwm_period_ns = TREO_PERIOD_NS,
+ .init = treo_backlight_init,
+ .notify = treo_backlight_notify,
+ .exit = treo_backlight_exit,
+};
+
+static struct platform_device treo_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &treo_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data treo_ficp_info = {
+ .gpio_pwdown = GPIO_NR_TREO_IR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_TREO_USB_DETECT,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_TREO_USB_PULLUP,
+};
+
+
+/******************************************************************************
+ * USB host
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct pxaohci_platform_data treo680_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT3,
+ .power_budget = 0,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_TREO_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int treo_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO_POWER_DETECT);
+}
+
+static char *treo_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = treo_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = treo_supplicants,
+ .num_supplicants = ARRAY_SIZE(treo_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Vibra and LEDs
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct gpio_led treo680_gpio_leds[] = {
+ {
+ .name = "treo680:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_VIBRATE_EN,
+ },
+ {
+ .name = "treo680:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO_GREEN_LED,
+ },
+ {
+ .name = "treo680:white:keybbl",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+ .leds = treo680_gpio_leds,
+ .num_leds = ARRAY_SIZE(treo680_gpio_leds),
+};
+
+static struct platform_device treo680_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &treo680_gpio_led_info,
+ }
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+/* TODO: add support for 324x324 */
+static struct pxafb_mode_info treo_lcd_modes[] = {
+{
+ .pixclock = 86538,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
+}
+
+static struct pxafb_mach_info treo_lcd_screen = {
+ .modes = treo_lcd_modes,
+ .num_modes = ARRAY_SIZE(treo_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+static void __init treo_pm_init(void)
+{
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* this is where the bootloader jumps */
+ memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *treo_devices[] __initdata = {
+ &treo_backlight,
+ &power_supply,
+};
+
+#ifdef CONFIG_MACH_TREO680
+static struct platform_device *treo680_devices[] __initdata = {
+ &treo680_leds,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/* setup udc GPIOs initial state */
+static void __init treo_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_TREO_USB_PULLUP);
+ }
+}
+
+static void __init treo_lcd_power_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
+ if (ret) {
+ pr_err("Treo680: LCD power GPIO request failed!\n");
+ return;
+ }
+
+ ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
+ if (ret) {
+ pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+ gpio_free(GPIO_NR_TREO_LCD_POWER);
+ return;
+ }
+
+ treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
+}
+
+static void __init treo_init(void)
+{
+ treo_pm_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+ treo_lcd_power_init();
+ set_pxa_fb_info(&treo_lcd_screen);
+ treo_udc_init();
+ pxa_set_udc_info(&treo_udc_info);
+ pxa_set_ac97_info(&treo_ac97_pdata);
+ pxa_set_ficp_info(&treo_ficp_info);
+
+ platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+}
+
+#ifdef CONFIG_MACH_TREO680
+static void __init treo680_init(void)
+{
+ treo_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
+ pxa_set_mci_info(&treo680_mci_platform_data);
+ pxa_set_keypad_info(&treo680_keypad_platform_data);
+ pxa_set_ohci_info(&treo680_ohci_info);
+
+ platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+}
+
+MACHINE_START(TREO680, "Palm Treo 680")
+ .phys_io = TREO_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = treo680_init,
+MACHINE_END
+#endif /* CONFIG_MACH_TREO680 */
+++ /dev/null
-/*
- * Hardware definitions for Palm Treo 680
- *
- * Author: Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
-#include <linux/power_supply.h>
-#include <linux/sysdev.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/treo680.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo680_pin_config[] __initdata = {
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
- GPIO33_GPIO, /* SD read only */
- GPIO113_GPIO, /* SD detect */
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
- GPIO89_AC97_SYSCLK,
- GPIO95_AC97_nRESET,
-
- /* IrDA */
- GPIO46_FICP_RXD,
- GPIO47_FICP_TXD,
-
- /* PWM */
- GPIO16_PWM0_OUT,
-
- /* USB */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
-
- /* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
- GPIO98_KP_MKIN_4,
- GPIO99_KP_MKIN_5,
- GPIO91_KP_MKIN_6,
- GPIO13_KP_MKIN_7,
- GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
- GPIO104_KP_MKOUT_1,
- GPIO105_KP_MKOUT_2,
- GPIO106_KP_MKOUT_3,
- GPIO107_KP_MKOUT_4,
- GPIO108_KP_MKOUT_5,
- GPIO96_KP_MKOUT_6,
- GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
-
- /* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
-
- /* Quick Capture Interface */
- GPIO84_CIF_FV,
- GPIO85_CIF_LV,
- GPIO53_CIF_MCLK,
- GPIO54_CIF_PCLK,
- GPIO81_CIF_DD_0,
- GPIO55_CIF_DD_1,
- GPIO51_CIF_DD_2,
- GPIO50_CIF_DD_3,
- GPIO52_CIF_DD_4,
- GPIO48_CIF_DD_5,
- GPIO17_CIF_DD_6,
- GPIO12_CIF_DD_7,
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* GSM */
- GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
- GPIO34_FFUART_RXD,
- GPIO35_FFUART_CTS,
- GPIO39_FFUART_TXD,
- GPIO41_FFUART_RTS,
-
- /* MISC. */
- GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
- GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
- GPIO116_GPIO, /* headphone detect */
- GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data treo680_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
- .gpio_power = GPIO_NR_TREO680_SD_POWER,
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-static unsigned int treo680_matrix_keys[] = {
- KEY(0, 0, KEY_F8), /* Red/Off/Power */
- KEY(0, 1, KEY_LEFT),
- KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
- KEY(0, 3, KEY_L),
- KEY(0, 4, KEY_A),
- KEY(0, 5, KEY_Q),
- KEY(0, 6, KEY_P),
-
- KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
- KEY(1, 1, KEY_RIGHT),
- KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
- KEY(1, 3, KEY_Z),
- KEY(1, 4, KEY_S),
- KEY(1, 5, KEY_W),
-
- KEY(2, 0, KEY_F1), /* Phone */
- KEY(2, 1, KEY_UP),
- KEY(2, 2, KEY_0),
- KEY(2, 3, KEY_X),
- KEY(2, 4, KEY_D),
- KEY(2, 5, KEY_E),
-
- KEY(3, 0, KEY_F10), /* Calendar */
- KEY(3, 1, KEY_DOWN),
- KEY(3, 2, KEY_SPACE),
- KEY(3, 3, KEY_C),
- KEY(3, 4, KEY_F),
- KEY(3, 5, KEY_R),
-
- KEY(4, 0, KEY_F12), /* Mail */
- KEY(4, 1, KEY_KPENTER),
- KEY(4, 2, KEY_RIGHTALT), /* Alt */
- KEY(4, 3, KEY_V),
- KEY(4, 4, KEY_G),
- KEY(4, 5, KEY_T),
-
- KEY(5, 0, KEY_F9), /* Home */
- KEY(5, 1, KEY_PAGEUP), /* Side up */
- KEY(5, 2, KEY_DOT),
- KEY(5, 3, KEY_B),
- KEY(5, 4, KEY_H),
- KEY(5, 5, KEY_Y),
-
- KEY(6, 0, KEY_TAB), /* Side Activate */
- KEY(6, 1, KEY_PAGEDOWN), /* Side down */
- KEY(6, 2, KEY_ENTER),
- KEY(6, 3, KEY_N),
- KEY(6, 4, KEY_J),
- KEY(6, 5, KEY_U),
-
- KEY(7, 0, KEY_F6), /* Green/Call */
- KEY(7, 1, KEY_O),
- KEY(7, 2, KEY_BACKSPACE),
- KEY(7, 3, KEY_M),
- KEY(7, 4, KEY_K),
- KEY(7, 5, KEY_I),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
- .matrix_key_rows = 8,
- .matrix_key_cols = 7,
- .matrix_key_map = treo680_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
- .direct_key_map = { KEY_CONNECT },
- .direct_key_num = 1,
-
- .debounce_interval = 30,
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo680_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo680_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_TREO680_BL_POWER);
-err:
- return ret;
-}
-
-static int treo680_backlight_notify(int brightness)
-{
- gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
- return TREO680_MAX_INTENSITY - brightness;
-};
-
-static void treo680_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO680_BL_POWER);
-}
-
-static struct platform_pwm_backlight_data treo680_backlight_data = {
- .pwm_id = 0,
- .max_brightness = TREO680_MAX_INTENSITY,
- .dft_brightness = TREO680_DEFAULT_INTENSITY,
- .pwm_period_ns = TREO680_PERIOD_NS,
- .init = treo680_backlight_init,
- .notify = treo680_backlight_notify,
- .exit = treo680_backlight_exit,
-};
-
-static struct platform_device treo680_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &treo680_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo680_ficp_info = {
- .gpio_pwdown = GPIO_NR_TREO680_IR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
- .gpio_vbus = GPIO_NR_TREO680_USB_DETECT,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_TREO680_USB_PULLUP,
-};
-
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-static struct pxaohci_platform_data treo680_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT3,
- .power_budget = 0,
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_TREO680_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int treo680_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO680_POWER_DETECT);
-}
-
-static char *treo680_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = treo680_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = treo680_supplicants,
- .num_supplicants = ARRAY_SIZE(treo680_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-static struct gpio_led gpio_leds[] = {
- {
- .name = "treo680:vibra:vibra",
- .default_trigger = "none",
- .gpio = GPIO_NR_TREO680_VIBRATE_EN,
- },
- {
- .name = "treo680:green:led",
- .default_trigger = "mmc0",
- .gpio = GPIO_NR_TREO680_GREEN_LED,
- },
- {
- .name = "treo680:keybbl:keybbl",
- .default_trigger = "none",
- .gpio = GPIO_NR_TREO680_KEYB_BL,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device treo680_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- }
-};
-
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo680_lcd_modes[] = {
-{
- .pixclock = 86538,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
-
- .left_margin = 20,
- .right_margin = 8,
- .upper_margin = 8,
- .lower_margin = 5,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
-{
- gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo680_lcd_screen = {
- .modes = treo680_lcd_modes,
- .num_modes = ARRAY_SIZE(treo680_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo680_pm_init(void)
-{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* this is where the bootloader jumps */
- memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
-}
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &treo680_backlight,
- &treo680_leds,
- &power_supply,
-};
-
-/* setup udc GPIOs initial state */
-static void __init treo680_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
- gpio_free(GPIO_NR_TREO680_USB_PULLUP);
- }
-}
-
-static void __init treo680_lcd_power_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
- if (ret) {
- pr_err("Treo680: LCD power GPIO request failed!\n");
- return;
- }
-
- ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
- if (ret) {
- pr_err("Treo680: setting LCD power GPIO direction failed!\n");
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
- return;
- }
-
- treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
-}
-
-static void __init treo680_init(void)
-{
- treo680_pm_init();
- pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
- pxa_set_keypad_info(&treo680_keypad_platform_data);
- treo680_lcd_power_init();
- set_pxa_fb_info(&treo680_lcd_screen);
- pxa_set_mci_info(&treo680_mci_platform_data);
- treo680_udc_init();
- pxa_set_udc_info(&treo680_udc_info);
- pxa_set_ac97_info(&treo680_ac97_pdata);
- pxa_set_ficp_info(&treo680_ficp_info);
- pxa_set_ohci_info(&treo680_ohci_info);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(TREO680, "Palm Treo 680")
- .phys_io = TREO680_PHYS_IO_START,
- .io_pg_offst = io_p2v(0x40000000),
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
- .init_machine = treo680_init,
-MACHINE_END
projects / openwrt / staging / blogic.git / commitdiff