generic: add b53 swconfig switch driver
authorJonas Gorski <jogo@openwrt.org>
Wed, 23 Jan 2013 10:12:33 +0000 (10:12 +0000)
committerJonas Gorski <jogo@openwrt.org>
Wed, 23 Jan 2013 10:12:33 +0000 (10:12 +0000)
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35305

16 files changed:
target/linux/generic/config-3.6
target/linux/generic/config-3.7
target/linux/generic/config-3.8
target/linux/generic/files/drivers/net/phy/b53/Kconfig [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/Makefile [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_common.c [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_priv.h [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_regs.h [new file with mode: 0644]
target/linux/generic/files/drivers/net/phy/b53/b53_spi.c [new file with mode: 0644]
target/linux/generic/files/include/linux/platform_data/b53.h [new file with mode: 0644]
target/linux/generic/patches-3.6/730-phy_b53.patch [new file with mode: 0644]
target/linux/generic/patches-3.7/730-phy_b53.patch [new file with mode: 0644]
target/linux/generic/patches-3.8/730-phy_b53.patch [new file with mode: 0644]

index 090346fcdc646e653b247eed989ceb2fa981dba4..707a2637d39cfe244c9184bef1e8e8ea5edbbab4 100644 (file)
@@ -176,6 +176,7 @@ CONFIG_ATM_CLIP_NO_ICMP=y
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_B44 is not set
+# CONFIG_B53 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 CONFIG_BASE_FULL=y
index f2147e12948c31b162bfc7c78b9d689a06e0b557..0bd5c8787fcc6ed0afd967bf41ce6314adf85dee 100644 (file)
@@ -180,6 +180,7 @@ CONFIG_ATM_CLIP_NO_ICMP=y
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_B44 is not set
+# CONFIG_B53 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 CONFIG_BASE_FULL=y
index 443ce6d7e512df8203ce5bbda75db677956422f7..7e55421718dd6c1ac9dfda61759851788f012c24 100644 (file)
@@ -184,6 +184,7 @@ CONFIG_ATM_CLIP_NO_ICMP=y
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_B44 is not set
+# CONFIG_B53 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 CONFIG_BASE_FULL=y
diff --git a/target/linux/generic/files/drivers/net/phy/b53/Kconfig b/target/linux/generic/files/drivers/net/phy/b53/Kconfig
new file mode 100644 (file)
index 0000000..0641252
--- /dev/null
@@ -0,0 +1,30 @@
+menuconfig B53
+       tristate "Broadcom bcm53xx managed switch support"
+       depends on SWCONFIG
+       help
+         This driver adds support for Broadcom managed switch chips. It supports
+         BCM5325E, BCM5365, BCM539x, BCM53115 and BCM53125 as well as BCM63XX
+         integrated switches.
+
+config B53_SPI_DRIVER
+       tristate "B53 SPI connected switch driver"
+       depends on B53
+       help
+         Select to enable support for registering switches configured through SPI.
+
+config B53_PHY_DRIVER
+       tristate "B53 MDIO connected switch driver"
+       depends on B53
+       select B53_PHY_FIXUP
+       help
+         Select to enable support for registering switches configured through MDIO.
+
+config B53_MMAP_DRIVER
+       tristate "B53 MMAP connected switch driver"
+       depends on B53
+       help
+         Select to enable support for memory-mapped switches like the BCM63XX
+         integrated switches.
+
+config B53_PHY_FIXUP
+       bool
diff --git a/target/linux/generic/files/drivers/net/phy/b53/Makefile b/target/linux/generic/files/drivers/net/phy/b53/Makefile
new file mode 100644 (file)
index 0000000..146196e
--- /dev/null
@@ -0,0 +1,9 @@
+obj-$(CONFIG_B53)              += b53_common.o
+
+obj-$(CONFIG_B53_PHY_FIXUP)    += b53_phy_fixup.o
+
+obj-$(CONFIG_B53_MMAP_DRIVER)  += b53_mmap.o
+obj-$(CONFIG_B53_PHY_DRIVER)   += b53_mdio.o
+obj-$(CONFIG_B53_SPI_DRIVER)   += b53_spi.o
+
+ccflags-y                      += -Werror
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c
new file mode 100644 (file)
index 0000000..c1cf513
--- /dev/null
@@ -0,0 +1,1294 @@
+/*
+ * B53 switch driver main logic
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/switch.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_regs.h"
+#include "b53_priv.h"
+
+/* buffer size needed for displaying all MIBs with max'd values */
+#define B53_BUF_SIZE   1188
+
+struct b53_mib_desc {
+       u8 size;
+       u8 offset;
+       const char *name;
+};
+
+
+/* BCM5365 MIB counters */
+static const struct b53_mib_desc b53_mibs_65[] = {
+       { 8, 0x00, "TxOctets" },
+       { 4, 0x08, "TxDropPkts" },
+       { 4, 0x10, "TxBroadcastPkts" },
+       { 4, 0x14, "TxMulticastPkts" },
+       { 4, 0x18, "TxUnicastPkts" },
+       { 4, 0x1c, "TxCollisions" },
+       { 4, 0x20, "TxSingleCollision" },
+       { 4, 0x24, "TxMultipleCollision" },
+       { 4, 0x28, "TxDeferredTransmit" },
+       { 4, 0x2c, "TxLateCollision" },
+       { 4, 0x30, "TxExcessiveCollision" },
+       { 4, 0x38, "TxPausePkts" },
+       { 8, 0x44, "RxOctets" },
+       { 4, 0x4c, "RxUndersizePkts" },
+       { 4, 0x50, "RxPausePkts" },
+       { 4, 0x54, "Pkts64Octets" },
+       { 4, 0x58, "Pkts65to127Octets" },
+       { 4, 0x5c, "Pkts128to255Octets" },
+       { 4, 0x60, "Pkts256to511Octets" },
+       { 4, 0x64, "Pkts512to1023Octets" },
+       { 4, 0x68, "Pkts1024to1522Octets" },
+       { 4, 0x6c, "RxOversizePkts" },
+       { 4, 0x70, "RxJabbers" },
+       { 4, 0x74, "RxAlignmentErrors" },
+       { 4, 0x78, "RxFCSErrors" },
+       { 8, 0x7c, "RxGoodOctets" },
+       { 4, 0x84, "RxDropPkts" },
+       { 4, 0x88, "RxUnicastPkts" },
+       { 4, 0x8c, "RxMulticastPkts" },
+       { 4, 0x90, "RxBroadcastPkts" },
+       { 4, 0x94, "RxSAChanges" },
+       { 4, 0x98, "RxFragments" },
+       { },
+};
+
+/* BCM63xx MIB counters */
+static const struct b53_mib_desc b53_mibs_63xx[] = {
+       { 8, 0x00, "TxOctets" },
+       { 4, 0x08, "TxDropPkts" },
+       { 4, 0x0c, "TxQoSPkts" },
+       { 4, 0x10, "TxBroadcastPkts" },
+       { 4, 0x14, "TxMulticastPkts" },
+       { 4, 0x18, "TxUnicastPkts" },
+       { 4, 0x1c, "TxCollisions" },
+       { 4, 0x20, "TxSingleCollision" },
+       { 4, 0x24, "TxMultipleCollision" },
+       { 4, 0x28, "TxDeferredTransmit" },
+       { 4, 0x2c, "TxLateCollision" },
+       { 4, 0x30, "TxExcessiveCollision" },
+       { 4, 0x38, "TxPausePkts" },
+       { 8, 0x3c, "TxQoSOctets" },
+       { 8, 0x44, "RxOctets" },
+       { 4, 0x4c, "RxUndersizePkts" },
+       { 4, 0x50, "RxPausePkts" },
+       { 4, 0x54, "Pkts64Octets" },
+       { 4, 0x58, "Pkts65to127Octets" },
+       { 4, 0x5c, "Pkts128to255Octets" },
+       { 4, 0x60, "Pkts256to511Octets" },
+       { 4, 0x64, "Pkts512to1023Octets" },
+       { 4, 0x68, "Pkts1024to1522Octets" },
+       { 4, 0x6c, "RxOversizePkts" },
+       { 4, 0x70, "RxJabbers" },
+       { 4, 0x74, "RxAlignmentErrors" },
+       { 4, 0x78, "RxFCSErrors" },
+       { 8, 0x7c, "RxGoodOctets" },
+       { 4, 0x84, "RxDropPkts" },
+       { 4, 0x88, "RxUnicastPkts" },
+       { 4, 0x8c, "RxMulticastPkts" },
+       { 4, 0x90, "RxBroadcastPkts" },
+       { 4, 0x94, "RxSAChanges" },
+       { 4, 0x98, "RxFragments" },
+       { 4, 0xa0, "RxSymbolErrors" },
+       { 4, 0xa4, "RxQoSPkts" },
+       { 8, 0xa8, "RxQoSOctets" },
+       { 4, 0xb0, "Pkts1523to2047Octets" },
+       { 4, 0xb4, "Pkts2048to4095Octets" },
+       { 4, 0xb8, "Pkts4096to8191Octets" },
+       { 4, 0xbc, "Pkts8192to9728Octets" },
+       { 4, 0xc0, "RxDiscarded" },
+       { }
+};
+
+/* MIB counters */
+static const struct b53_mib_desc b53_mibs[] = {
+       { 8, 0x00, "TxOctets" },
+       { 4, 0x08, "TxDropPkts" },
+       { 4, 0x10, "TxBroadcastPkts" },
+       { 4, 0x14, "TxMulticastPkts" },
+       { 4, 0x18, "TxUnicastPkts" },
+       { 4, 0x1c, "TxCollisions" },
+       { 4, 0x20, "TxSingleCollision" },
+       { 4, 0x24, "TxMultipleCollision" },
+       { 4, 0x28, "TxDeferredTransmit" },
+       { 4, 0x2c, "TxLateCollision" },
+       { 4, 0x30, "TxExcessiveCollision" },
+       { 4, 0x38, "TxPausePkts" },
+       { 8, 0x50, "RxOctets" },
+       { 4, 0x58, "RxUndersizePkts" },
+       { 4, 0x5c, "RxPausePkts" },
+       { 4, 0x60, "Pkts64Octets" },
+       { 4, 0x64, "Pkts65to127Octets" },
+       { 4, 0x68, "Pkts128to255Octets" },
+       { 4, 0x6c, "Pkts256to511Octets" },
+       { 4, 0x70, "Pkts512to1023Octets" },
+       { 4, 0x74, "Pkts1024to1522Octets" },
+       { 4, 0x78, "RxOversizePkts" },
+       { 4, 0x7c, "RxJabbers" },
+       { 4, 0x80, "RxAlignmentErrors" },
+       { 4, 0x84, "RxFCSErrors" },
+       { 8, 0x88, "RxGoodOctets" },
+       { 4, 0x90, "RxDropPkts" },
+       { 4, 0x94, "RxUnicastPkts" },
+       { 4, 0x98, "RxMulticastPkts" },
+       { 4, 0x9c, "RxBroadcastPkts" },
+       { 4, 0xa0, "RxSAChanges" },
+       { 4, 0xa4, "RxFragments" },
+       { 4, 0xa8, "RxJumboPkts" },
+       { 4, 0xac, "RxSymbolErrors" },
+       { 4, 0xc0, "RxDiscarded" },
+       { }
+};
+
+static int b53_do_vlan_op(struct b53_device *dev, u8 op)
+{
+       unsigned int i;
+
+       b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
+
+       for (i = 0; i < 10; i++) {
+               u8 vta;
+
+               b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
+               if (!(vta & VTA_START_CMD))
+                       return 0;
+
+               usleep_range(100, 200);
+       }
+
+       return -EIO;
+}
+
+static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, u16 members,
+                              u16 untag)
+{
+       if (is5325(dev)) {
+               u32 entry = 0;
+
+               if (members)
+                       entry = (untag << VA_UNTAG_S) | members | VA_VALID_25;
+
+               b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
+               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
+                           VTA_RW_STATE_WR | VTA_RW_OP_EN);
+       } else if (is5365(dev)) {
+               u16 entry = 0;
+
+               if (members)
+                       entry = (untag << VA_UNTAG_S) | members | VA_VALID_65;
+
+               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
+               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
+                           VTA_RW_STATE_WR | VTA_RW_OP_EN);
+       } else {
+               b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
+               b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
+                           (untag << VTE_UNTAG_S) | members);
+
+               b53_do_vlan_op(dev, VTA_CMD_WRITE);
+       }
+}
+
+void b53_set_forwarding(struct b53_device *dev, int enable)
+{
+       u8 mgmt;
+
+       b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+       if (enable)
+               mgmt |= SM_SW_FWD_EN;
+       else
+               mgmt &= ~SM_SW_FWD_EN;
+
+       b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+}
+
+static void b53_enable_vlan(struct b53_device *dev, int enable)
+{
+       u8 mgmt, vc0, vc1, vc4 = 0, vc5;
+
+       b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+       b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
+       b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
+
+       if (is5325(dev) || is5365(dev)) {
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
+       } else if (is63xx(dev)) {
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
+       } else {
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
+       }
+
+       if (enable) {
+               if (!is63xx(dev))
+                       mgmt |= SM_SW_FWD_MODE;
+
+               vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
+               vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
+               vc4 &= ~VC4_ING_VID_CHECK_MASK;
+               vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
+               vc5 |= VC5_DROP_VTABLE_MISS;
+
+               if (is5325(dev))
+                       vc0 &= ~VC0_RESERVED_1;
+
+               if (is5325(dev) || is5365(dev))
+                       vc1 |= VC1_RX_MCST_TAG_EN;
+
+               if (!is5325(dev) && !is5365(dev)) {
+                       if (dev->allow_vid_4095)
+                               vc5 |= VC5_VID_FFF_EN;
+                       else
+                               vc5 &= ~VC5_VID_FFF_EN;
+               }
+       } else {
+               mgmt &= ~SM_SW_FWD_MODE;
+               vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
+               vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
+               vc4 &= ~VC4_ING_VID_CHECK_MASK;
+               vc5 &= ~VC5_DROP_VTABLE_MISS;
+
+               if (is5325(dev) || is5365(dev))
+                       vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
+               else
+                       vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
+
+               if (is5325(dev) || is5365(dev))
+                       vc1 &= ~VC1_RX_MCST_TAG_EN;
+
+               if (!is5325(dev) && !is5365(dev))
+                       vc5 &= ~VC5_VID_FFF_EN;
+       }
+
+       b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
+       b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
+
+       if (is5325(dev) || is5365(dev)) {
+               /* enable the high 8 bit vid check on 5325 */
+               if (is5325(dev) && enable)
+                       b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
+                                  VC3_HIGH_8BIT_EN);
+               else
+                       b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
+
+               b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
+               b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
+       } else if (is63xx(dev)) {
+               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
+               b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
+               b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
+       } else {
+               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
+               b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
+               b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
+       }
+
+       b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+}
+
+static int b53_set_jumbo(struct b53_device *dev, int enable, int allow_10_100)
+{
+       u32 port_mask = 0;
+       u16 max_size = JMS_MIN_SIZE;
+
+       if (is5325(dev) || is5365(dev))
+               return -EINVAL;
+
+       if (enable) {
+               port_mask = dev->enabled_ports;
+               max_size = JMS_MAX_SIZE;
+               if (allow_10_100)
+                       port_mask |= JPM_10_100_JUMBO_EN;
+       }
+
+       b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
+       return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
+}
+
+static int b53_flush_arl(struct b53_device *dev)
+{
+       unsigned int i;
+
+       b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
+                  FAST_AGE_DONE | FAST_AGE_DYNAMIC | FAST_AGE_STATIC);
+
+       for (i = 0; i < 10; i++) {
+               u8 fast_age_ctrl;
+
+               b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
+                         &fast_age_ctrl);
+
+               if (!(fast_age_ctrl & FAST_AGE_DONE))
+                       return 0;
+
+               mdelay(1);
+       }
+
+       pr_warn("time out while flushing ARL\n");
+
+       return -EINVAL;
+}
+
+static void b53_enable_ports(struct b53_device *dev)
+{
+       unsigned i;
+
+       b53_for_each_port(dev, i) {
+               u8 port_ctrl;
+               u16 pvlan_mask;
+
+               /* 
+                * prevent leaking packets between wan and lan in unmanaged
+                * mode through port vlans.
+                */
+               if (dev->enable_vlan || is_cpu_port(dev, i))
+                       pvlan_mask = 0x1ff;
+               else if (is531x5(dev))
+                       /* BCM53115 may use a different port as cpu port */
+                       pvlan_mask = BIT(dev->sw_dev.cpu_port);
+               else 
+                       pvlan_mask = BIT(B53_CPU_PORT);
+
+               /* BCM5325 CPU port is at 8 */
+               if ((is5325(dev) || is5365(dev)) && i == B53_CPU_PORT_25)
+                       i = B53_CPU_PORT;
+
+               if (dev->chip_id == BCM5398_DEVICE_ID && (i == 6 || i == 7))
+                       /* disable unused ports 6 & 7 */
+                       port_ctrl = PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
+               else if (i == B53_CPU_PORT)
+                       port_ctrl = PORT_CTRL_RX_BCST_EN |
+                                   PORT_CTRL_RX_MCST_EN |
+                                   PORT_CTRL_RX_UCST_EN;
+               else
+                       port_ctrl = 0;
+
+               b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i),
+                           pvlan_mask);
+
+               /* port state is handled by bcm63xx_enet driver */
+               if (!is63xx(dev))
+                       b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(i),
+                                  port_ctrl);
+       }
+}
+
+static void b53_enable_mib(struct b53_device *dev)
+{
+       u8 gc;
+
+       b53_read8(dev, B53_CTRL_PAGE, B53_GLOBAL_CONFIG, &gc);
+
+       gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
+
+       b53_write8(dev, B53_CTRL_PAGE, B53_GLOBAL_CONFIG, gc);
+}
+
+static int b53_apply(struct b53_device *dev)
+{
+       int i;
+
+       /* clear all vlan entries */
+       if (is5325(dev) || is5365(dev)) {
+               for (i = 1; i < dev->sw_dev.vlans; i++)
+                       b53_set_vlan_entry(dev, i, 0, 0);
+       } else {
+               b53_do_vlan_op(dev, VTA_CMD_CLEAR);
+       }
+
+       b53_enable_vlan(dev, dev->enable_vlan);
+
+       /* fill VLAN table */
+       if (dev->enable_vlan) {
+               for (i = 0; i < dev->sw_dev.vlans; i++) {
+                       struct b53_vlan *vlan = &dev->vlans[i];
+
+                       if (!vlan->members)
+                               continue;
+
+                       b53_set_vlan_entry(dev, i, vlan->members, vlan->untag);
+               }
+
+               b53_for_each_port(dev, i)
+                       b53_write16(dev, B53_VLAN_PAGE,
+                                   B53_VLAN_PORT_DEF_TAG(i),
+                                   dev->ports[i].pvid);
+       } else {
+               b53_for_each_port(dev, i)
+                       b53_write16(dev, B53_VLAN_PAGE,
+                                   B53_VLAN_PORT_DEF_TAG(i), 1);
+
+       }
+
+       b53_enable_ports(dev);
+
+       if (!is5325(dev) && !is5365(dev))
+               b53_set_jumbo(dev, dev->enable_jumbo, 1);
+
+       return 0;
+}
+
+static int b53_switch_reset(struct b53_device *dev)
+{
+       u8 mgmt;
+
+       b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+       if (!(mgmt & SM_SW_FWD_EN)) {
+               mgmt &= ~SM_SW_FWD_MODE;
+               mgmt |= SM_SW_FWD_EN;
+
+               b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+               b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
+
+               if (!(mgmt & SM_SW_FWD_EN)) {
+                       pr_err("Failed to enable switch!\n");
+                       return -EINVAL;
+               }
+       }
+
+       /* enable all ports */
+       b53_enable_ports(dev);
+
+       /* configure MII port if necessary */
+       if (is5325(dev)) {
+               u8 mii_port_override;
+
+               b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+                         &mii_port_override);
+               /* reverse mii needs to be enabled */
+               if (!(mii_port_override & PORT_OVERRIDE_RV_MII_25)) {
+                       b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+                                  mii_port_override | PORT_OVERRIDE_RV_MII_25);
+                       b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+                                 &mii_port_override);
+
+                       if (!(mii_port_override & PORT_OVERRIDE_RV_MII_25)) {
+                               pr_err("Failed to enable reverse MII mode\n");
+                               return -EINVAL;
+                       }
+               }
+       } else if (is531x5(dev) && dev->sw_dev.cpu_port == B53_CPU_PORT) {
+               u8 mii_port_override;
+
+               b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+                         &mii_port_override);
+               b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+                          mii_port_override | PORT_OVERRIDE_EN |
+                          PORT_OVERRIDE_LINK);
+       }
+
+       b53_enable_mib(dev);
+
+       return b53_flush_arl(dev);
+}
+
+/*
+ * Swconfig glue functions
+ */
+
+static int b53_global_get_vlan_enable(struct switch_dev *dev,
+                                     const struct switch_attr *attr,
+                                     struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       val->value.i = priv->enable_vlan;
+
+       return 0;
+}
+
+static int b53_global_set_vlan_enable(struct switch_dev *dev,
+                                     const struct switch_attr *attr,
+                                     struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       priv->enable_vlan = val->value.i;
+
+       return 0;
+}
+
+static int b53_global_get_jumbo_enable(struct switch_dev *dev,
+                                      const struct switch_attr *attr,
+                                      struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       val->value.i = priv->enable_jumbo;
+
+       return 0;
+}
+
+static int b53_global_set_jumbo_enable(struct switch_dev *dev,
+                                      const struct switch_attr *attr,
+                                      struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       priv->enable_jumbo = val->value.i;
+
+       return 0;
+}
+
+static int b53_global_get_4095_enable(struct switch_dev *dev,
+                                     const struct switch_attr *attr,
+                                     struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       val->value.i = priv->allow_vid_4095;
+
+       return 0;
+}
+
+static int b53_global_set_4095_enable(struct switch_dev *dev,
+                                     const struct switch_attr *attr,
+                                     struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       priv->allow_vid_4095 = val->value.i;
+
+       return 0;
+}
+
+static int b53_global_get_ports(struct switch_dev *dev,
+                               const struct switch_attr *attr,
+                               struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       val->len = snprintf(priv->buf, B53_BUF_SIZE, "0x%04x",
+                           priv->enabled_ports);
+       val->value.s = priv->buf;
+
+       return 0;
+}
+
+static int b53_port_get_pvid(struct switch_dev *dev, int port, int *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       *val = priv->ports[port].pvid;
+
+       return 0;
+}
+
+static int b53_port_set_pvid(struct switch_dev *dev, int port, int val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       if (val > 15 && is5325(priv))
+               return -EINVAL;
+       if (val == 4095 && !priv->allow_vid_4095)
+               return -EINVAL;
+
+       priv->ports[port].pvid = val;
+
+       return 0;
+}
+
+static int b53_vlan_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+       struct switch_port *port = &val->value.ports[0];
+       struct b53_vlan *vlan = &priv->vlans[val->port_vlan];
+       int i;
+
+       val->len = 0;
+
+       if (!vlan->members)
+               return 0;
+
+       for (i = 0; i < dev->ports; i++) {
+               if (!(vlan->members & BIT(i)))
+                       continue;
+
+
+               if (!(vlan->untag & BIT(i)))
+                       port->flags = BIT(SWITCH_PORT_FLAG_TAGGED);
+               else
+                       port->flags = 0;
+
+               port->id = i;
+               val->len++;
+               port++;
+       }
+
+       return 0;
+}
+
+static int b53_vlan_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+       struct switch_port *port;
+       struct b53_vlan *vlan = &priv->vlans[val->port_vlan];
+       int i;
+
+       /* only BCM5325 and BCM5365 supports VID 0 */
+       if (val->port_vlan == 0 && !is5325(priv) && !is5365(priv))
+               return -EINVAL;
+
+       /* VLAN 4095 needs special handling */
+       if (val->port_vlan == 4095 && !priv->allow_vid_4095)
+               return -EINVAL;
+
+       port = &val->value.ports[0];
+       vlan->members = 0;
+       vlan->untag = 0;
+       for (i = 0; i < val->len; i++, port++) {
+               vlan->members |= BIT(port->id);
+
+               if (!(port->flags & BIT(SWITCH_PORT_FLAG_TAGGED))) {
+                       vlan->untag |= BIT(port->id);
+                       priv->ports[port->id].pvid = val->port_vlan;
+               };
+       }
+
+       /* ignore disabled ports */
+       vlan->members &= priv->enabled_ports;
+       vlan->untag &= priv->enabled_ports;
+
+       return 0;
+}
+
+static int b53_port_get_link(struct switch_dev *dev, int port,
+                            struct switch_port_link *link)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       if (is_cpu_port(priv, port)) {
+               link->link = 1;
+               link->duplex = 1;
+               link->speed = is5325(priv) || is5365(priv) ?
+                               SWITCH_PORT_SPEED_100 : SWITCH_PORT_SPEED_1000;
+               link->aneg = 0;
+       } else if (priv->enabled_ports & BIT(port)) {
+               u32 speed;
+               u16 lnk, duplex;
+
+               b53_read16(priv, B53_STAT_PAGE, B53_LINK_STAT, &lnk);
+               b53_read16(priv, B53_STAT_PAGE, priv->duplex_reg, &duplex);
+
+               lnk = (lnk >> port) & 1;
+               duplex = (duplex >> port) & 1;
+
+               if (is5325(priv) || is5365(priv)) {
+                       u16 tmp;
+
+                       b53_read16(priv, B53_STAT_PAGE, B53_SPEED_STAT, &tmp);
+                       speed = SPEED_PORT_FE(tmp, port);
+               } else {
+                       b53_read32(priv, B53_STAT_PAGE, B53_SPEED_STAT, &speed);
+                       speed = SPEED_PORT_GE(speed, port);
+               }
+
+               link->link = lnk;
+               if (lnk) {
+                       link->duplex = duplex;
+                       switch (speed) {
+                       case SPEED_STAT_10M:
+                               link->speed = SWITCH_PORT_SPEED_10;
+                               break;
+                       case SPEED_STAT_100M:
+                               link->speed = SWITCH_PORT_SPEED_100;
+                               break;
+                       case SPEED_STAT_1000M:
+                               link->speed = SWITCH_PORT_SPEED_1000;
+                               break;
+                       }
+               }
+
+               link->aneg = 1;
+       } else {
+               link->link = 0;
+       }
+
+       return 0;
+
+}
+
+static int b53_global_reset_switch(struct switch_dev *dev)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       /* reset vlans */
+       priv->enable_vlan = 0;
+       priv->enable_jumbo = 0;
+       priv->allow_vid_4095 = 0;
+
+       memset(priv->vlans, 0, sizeof(priv->vlans) * dev->vlans);
+       memset(priv->ports, 0, sizeof(priv->ports) * dev->ports);
+
+       return b53_switch_reset(priv);
+}
+
+static int b53_global_apply_config(struct switch_dev *dev)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+
+       /* disable switching */
+       b53_set_forwarding(priv, 0);
+
+       b53_apply(priv);
+
+       /* enable switching */
+       b53_set_forwarding(priv, 1);
+
+       return 0;
+}
+
+
+static int b53_global_reset_mib(struct switch_dev *dev,
+                               const struct switch_attr *attr,
+                               struct switch_val *val)
+{
+       struct b53_device *priv = sw_to_b53(dev);
+       u8 gc;
+
+       b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
+
+       b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
+       mdelay(1);
+       b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
+       mdelay(1);
+
+       return 0;
+}
+
+static int b53_port_get_mib(struct switch_dev *sw_dev,
+                           const struct switch_attr *attr,
+                           struct switch_val *val)
+{
+       struct b53_device *dev = sw_to_b53(sw_dev);
+       const struct b53_mib_desc *mibs;
+       int port = val->port_vlan;
+       int len = 0;
+
+       if (!(BIT(port) & dev->enabled_ports))
+               return -1;
+
+       if (is5365(dev)) {
+               if (port == 5)
+                       port = 8;
+
+               mibs = b53_mibs_65;
+       } else if (is63xx(dev)) {
+               mibs = b53_mibs_63xx;
+       } else {
+               mibs = b53_mibs;
+       }
+
+       dev->buf[0] = 0;
+
+       for (; mibs->size > 0; mibs++) {
+               u64 val;
+
+               if (mibs->size == 8) {
+                       b53_read64(dev, B53_MIB_PAGE(port), mibs->offset, &val);
+               } else {
+                       u32 val32;
+
+                       b53_read32(dev, B53_MIB_PAGE(port), mibs->offset,
+                                  &val32);
+                       val = val32;
+               }
+
+               len += snprintf(dev->buf + len, B53_BUF_SIZE - len,
+                               "%-20s: %llu\n", mibs->name, val);
+       }
+
+       val->len = len;
+       val->value.s = dev->buf;
+
+       return 0;
+}
+
+static struct switch_attr b53_global_ops_25[] = {
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "enable_vlan",
+               .description = "Enable VLAN mode",
+               .set = b53_global_set_vlan_enable,
+               .get = b53_global_get_vlan_enable,
+               .max = 1,
+       },
+       {
+               .type = SWITCH_TYPE_STRING,
+               .name = "ports",
+               .description = "Available ports (as bitmask)",
+               .get = b53_global_get_ports,
+       },
+};
+
+static struct switch_attr b53_global_ops_65[] = {
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "enable_vlan",
+               .description = "Enable VLAN mode",
+               .set = b53_global_set_vlan_enable,
+               .get = b53_global_get_vlan_enable,
+               .max = 1,
+       },
+       {
+               .type = SWITCH_TYPE_STRING,
+               .name = "ports",
+               .description = "Available ports (as bitmask)",
+               .get = b53_global_get_ports,
+       },
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "reset_mib",
+               .description = "Reset MIB counters",
+               .set = b53_global_reset_mib,
+       },
+};
+
+static struct switch_attr b53_global_ops[] = {
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "enable_vlan",
+               .description = "Enable VLAN mode",
+               .set = b53_global_set_vlan_enable,
+               .get = b53_global_get_vlan_enable,
+               .max = 1,
+       },
+       {
+               .type = SWITCH_TYPE_STRING,
+               .name = "ports",
+               .description = "Available Ports (as bitmask)",
+               .get = b53_global_get_ports,
+       },
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "reset_mib",
+               .description = "Reset MIB counters",
+               .set = b53_global_reset_mib,
+       },
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "enable_jumbo",
+               .description = "Enable Jumbo Frames",
+               .set = b53_global_set_jumbo_enable,
+               .get = b53_global_get_jumbo_enable,
+               .max = 1,
+       },
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "allow_vid_4095",
+               .description = "Allow VID 4095",
+               .set = b53_global_set_4095_enable,
+               .get = b53_global_get_4095_enable,
+               .max = 1,
+       },
+};
+
+static struct switch_attr b53_port_ops[] = {
+       {
+               .type = SWITCH_TYPE_STRING,
+               .name = "mib",
+               .description = "Get port's MIB counters",
+               .get = b53_port_get_mib,
+       },
+};
+
+static struct switch_attr b53_no_ops[] = {
+};
+
+static const struct switch_dev_ops b53_switch_ops_25 = {
+       .attr_global = {
+               .attr = b53_global_ops_25,
+               .n_attr = ARRAY_SIZE(b53_global_ops_25),
+       },
+       .attr_port = {
+               .attr = b53_no_ops,
+               .n_attr = ARRAY_SIZE(b53_no_ops),
+       },
+       .attr_vlan = {
+               .attr = b53_no_ops,
+               .n_attr = ARRAY_SIZE(b53_no_ops),
+       },
+
+       .get_vlan_ports = b53_vlan_get_ports,
+       .set_vlan_ports = b53_vlan_set_ports,
+       .get_port_pvid = b53_port_get_pvid,
+       .set_port_pvid = b53_port_set_pvid,
+       .apply_config = b53_global_apply_config,
+       .reset_switch = b53_global_reset_switch,
+       .get_port_link = b53_port_get_link,
+};
+
+static const struct switch_dev_ops b53_switch_ops_65 = {
+       .attr_global = {
+               .attr = b53_global_ops_25,
+               .n_attr = ARRAY_SIZE(b53_global_ops_65),
+       },
+       .attr_port = {
+               .attr = b53_no_ops,
+               .n_attr = ARRAY_SIZE(b53_port_ops),
+       },
+       .attr_vlan = {
+               .attr = b53_no_ops,
+               .n_attr = ARRAY_SIZE(b53_no_ops),
+       },
+
+       .get_vlan_ports = b53_vlan_get_ports,
+       .set_vlan_ports = b53_vlan_set_ports,
+       .get_port_pvid = b53_port_get_pvid,
+       .set_port_pvid = b53_port_set_pvid,
+       .apply_config = b53_global_apply_config,
+       .reset_switch = b53_global_reset_switch,
+       .get_port_link = b53_port_get_link,
+};
+
+static const struct switch_dev_ops b53_switch_ops = {
+       .attr_global = {
+               .attr = b53_global_ops,
+               .n_attr = ARRAY_SIZE(b53_global_ops),
+       },
+       .attr_port = {
+               .attr = b53_port_ops,
+               .n_attr = ARRAY_SIZE(b53_port_ops),
+       },
+       .attr_vlan = {
+               .attr = b53_no_ops,
+               .n_attr = ARRAY_SIZE(b53_no_ops),
+       },
+
+       .get_vlan_ports = b53_vlan_get_ports,
+       .set_vlan_ports = b53_vlan_set_ports,
+       .get_port_pvid = b53_port_get_pvid,
+       .set_port_pvid = b53_port_set_pvid,
+       .apply_config = b53_global_apply_config,
+       .reset_switch = b53_global_reset_switch,
+       .get_port_link = b53_port_get_link,
+};
+
+struct b53_chip_data {
+       u32 chip_id;
+       const char *dev_name;
+       const char *alias;
+       u16 vlans;
+       u16 enabled_ports;
+       u8 cpu_port;
+       u8 vta_regs[3];
+       u8 duplex_reg;
+       u8 jumbo_pm_reg;
+       u8 jumbo_size_reg;
+       const struct switch_dev_ops *sw_ops;
+};
+
+#define B53_VTA_REGS   \
+       { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
+#define B53_VTA_REGS_9798 \
+       { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
+#define B53_VTA_REGS_63XX \
+       { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
+
+static const struct b53_chip_data b53_switch_chips[] = {
+       {
+               .chip_id = BCM5325_DEVICE_ID,
+               .dev_name = "BCM5325",
+               .alias = "bcm5325",
+               .vlans = 16,
+               .enabled_ports = 0x1f,
+               .cpu_port = B53_CPU_PORT_25,
+               .duplex_reg = B53_DUPLEX_STAT_FE,
+               .sw_ops = &b53_switch_ops_25,
+       },
+       {
+               .chip_id = BCM5365_DEVICE_ID,
+               .dev_name = "BCM5365",
+               .alias = "bcm5365",
+               .vlans = 256,
+               .enabled_ports = 0x1f,
+               .cpu_port = B53_CPU_PORT_25,
+               .duplex_reg = B53_DUPLEX_STAT_FE,
+               .sw_ops = &b53_switch_ops_65,
+       },
+       {
+               .chip_id = BCM5395_DEVICE_ID,
+               .dev_name = "BCM5395",
+               .alias = "bcm5395",
+               .vlans = 4096,
+               .enabled_ports = 0x1f,
+               .cpu_port = B53_CPU_PORT,
+               .vta_regs = B53_VTA_REGS,
+               .duplex_reg = B53_DUPLEX_STAT_GE,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+               .sw_ops = &b53_switch_ops,
+       },
+       {
+               .chip_id = BCM5397_DEVICE_ID,
+               .dev_name = "BCM5397",
+               .alias = "bcm5397",
+               .vlans = 4096,
+               .enabled_ports = 0x1f,
+               .cpu_port = B53_CPU_PORT,
+               .vta_regs = B53_VTA_REGS_9798,
+               .duplex_reg = B53_DUPLEX_STAT_GE,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+               .sw_ops = &b53_switch_ops,
+       },
+       {
+               .chip_id = BCM5398_DEVICE_ID,
+               .dev_name = "BCM5398",
+               .alias = "bcm5398",
+               .vlans = 4096,
+               .enabled_ports = 0x7f,
+               .cpu_port = B53_CPU_PORT,
+               .vta_regs = B53_VTA_REGS_9798,
+               .duplex_reg = B53_DUPLEX_STAT_GE,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+               .sw_ops = &b53_switch_ops,
+       },
+       {
+               .chip_id = BCM53115_DEVICE_ID,
+               .dev_name = "BCM53115",
+               .alias = "bcm53115",
+               .vlans = 4096,
+               .enabled_ports = 0x1f,
+               .vta_regs = B53_VTA_REGS,
+               .cpu_port = B53_CPU_PORT,
+               .duplex_reg = B53_DUPLEX_STAT_GE,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+               .sw_ops = &b53_switch_ops,
+       },
+       {
+               .chip_id = BCM53125_DEVICE_ID,
+               .dev_name = "BCM53125",
+               .alias = "bcm53125",
+               .vlans = 4096,
+               .enabled_ports = 0x1f,
+               .cpu_port = B53_CPU_PORT,
+               .vta_regs = B53_VTA_REGS,
+               .duplex_reg = B53_DUPLEX_STAT_GE,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+               .sw_ops = &b53_switch_ops,
+       },
+       {
+               .chip_id = BCM63XX_DEVICE_ID,
+               .dev_name = "BCM63xx",
+               .alias = "bcm63xx",
+               .vlans = 4096,
+               .enabled_ports = 0, /* pdata must provide them */
+               .cpu_port = B53_CPU_PORT,
+               .vta_regs = B53_VTA_REGS_63XX,
+               .duplex_reg = B53_DUPLEX_STAT_63XX,
+               .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
+               .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
+               .sw_ops = &b53_switch_ops,
+       },
+};
+
+int b53_switch_init(struct b53_device *dev)
+{
+       struct switch_dev *sw_dev = &dev->sw_dev;
+       unsigned i;
+
+       for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
+               const struct b53_chip_data *chip = &b53_switch_chips[i];
+
+               if (chip->chip_id == dev->chip_id) {
+                       sw_dev->name = chip->dev_name;
+                       if (!sw_dev->alias)
+                               sw_dev->alias = chip->alias;
+                       if (!dev->enabled_ports)
+                               dev->enabled_ports = chip->enabled_ports;
+                       dev->duplex_reg = chip->duplex_reg;
+                       dev->vta_regs[0] = chip->vta_regs[0];
+                       dev->vta_regs[1] = chip->vta_regs[1];
+                       dev->vta_regs[2] = chip->vta_regs[2];
+                       dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+                       sw_dev->ops = chip->sw_ops;
+                       sw_dev->cpu_port = chip->cpu_port;
+                       sw_dev->vlans = chip->vlans;
+                       break;
+               }
+       }
+
+       if (!sw_dev->name)
+               return -EINVAL;
+
+       /* check which BCM5325x version we have */
+       if (is5325(dev)) {
+               u8 vc4;
+
+               b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
+
+               /* check reserved bits */
+               switch (vc4 & 3) {
+               case 1:
+                       /* BCM5325E */
+                       break;
+               case 3:
+                       /* BCM5325F - do not use port 4 */
+                       dev->enabled_ports &= ~BIT(4);
+                       break;
+               default:
+                       /* BCM5325M */
+                       return -EINVAL;
+               }
+       } else if (dev->chip_id == BCM53115_DEVICE_ID) {
+               u64 strap_value;
+
+               b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
+               /* use second IMP port if GMII is enabled */
+               if (strap_value & SV_GMII_CTRL_115)
+                       sw_dev->cpu_port = 5;
+       }
+
+       /* cpu port is always last */
+       sw_dev->ports = sw_dev->cpu_port + 1;
+       dev->enabled_ports |= BIT(sw_dev->cpu_port);
+
+       dev->ports = devm_kzalloc(dev->dev,
+                                 sizeof(struct b53_port) * sw_dev->ports,
+                                 GFP_KERNEL);
+       if (!dev->ports)
+               return -ENOMEM;
+
+       dev->vlans = devm_kzalloc(dev->dev,
+                                 sizeof(struct b53_vlan) * sw_dev->vlans,
+                                 GFP_KERNEL);
+       if (!dev->vlans)
+               return -ENOMEM;
+
+       dev->buf = devm_kzalloc(dev->dev, B53_BUF_SIZE, GFP_KERNEL);
+       if (!dev->buf)
+               return -ENOMEM;
+
+       return b53_switch_reset(dev);
+}
+
+struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
+                                   void *priv)
+{
+       struct b53_device *dev;
+
+       dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
+       if (!dev)
+               return NULL;
+
+       dev->dev = base;
+       dev->ops = ops;
+       dev->priv = priv;
+       mutex_init(&dev->reg_mutex);
+
+       return dev;
+}
+EXPORT_SYMBOL(b53_switch_alloc);
+
+int b53_switch_detect(struct b53_device *dev)
+{
+       u32 id32;
+       u16 tmp;
+       u8 id8;
+       int ret;
+
+       ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
+       if (ret)
+               return ret;
+
+       switch (id8) {
+       case 0:
+               /*
+                * BCM5325 and BCM5365 do not have this register so reads
+                * return 0. But the read operation did succeed, so assume
+                * this is one of them.
+                *
+                * Next check if we can write to the 5325's VTA register; for
+                * 5365 it is read only.
+                */
+
+               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
+               b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
+
+               if (tmp == 0xf)
+                       dev->chip_id = BCM5325_DEVICE_ID;
+               else
+                       dev->chip_id = BCM5365_DEVICE_ID;
+               break;
+       case BCM5395_DEVICE_ID:
+       case BCM5397_DEVICE_ID:
+       case BCM5398_DEVICE_ID:
+               dev->chip_id = id8;
+               break;
+       default:
+               ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
+               if (ret)
+                       return ret;
+
+               switch (id32) {
+               case BCM53115_DEVICE_ID:
+               case BCM53125_DEVICE_ID:
+                       dev->chip_id = id32;
+                       break;
+               default:
+                       pr_err("unsupported switch detected (BCM53%02x/BCM%x)\n",
+                              id8, id32);
+                       return -ENODEV;
+               }
+       }
+
+       return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID, &dev->core_rev);
+}
+EXPORT_SYMBOL(b53_switch_detect);
+
+int b53_switch_register(struct b53_device *dev)
+{
+       int ret;
+
+       if (dev->pdata) {
+               dev->chip_id = dev->pdata->chip_id;
+               dev->enabled_ports = dev->pdata->enabled_ports;
+               dev->sw_dev.alias = dev->pdata->alias;
+       }
+
+       if (!dev->chip_id && b53_switch_detect(dev))
+               return -EINVAL;
+
+       ret = b53_switch_init(dev);
+       if (ret)
+               return ret;
+
+       pr_info("found switch: %s, rev %i\n", dev->sw_dev.name, dev->core_rev);
+
+       return register_switch(&dev->sw_dev, NULL);
+}
+EXPORT_SYMBOL(b53_switch_register);
+
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 switch library");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c b/target/linux/generic/files/drivers/net/phy/b53/b53_mdio.c
new file mode 100644 (file)
index 0000000..9283af6
--- /dev/null
@@ -0,0 +1,401 @@
+/*
+ * B53 register access through MII registers
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/module.h>
+
+#include "b53_priv.h"
+
+#define B53_PSEUDO_PHY 0x1e /* Register Access Pseudo PHY */
+
+/* MII registers */
+#define REG_MII_PAGE    0x10    /* MII Page register */
+#define REG_MII_ADDR    0x11    /* MII Address register */
+#define REG_MII_DATA0   0x18    /* MII Data register 0 */
+#define REG_MII_DATA1   0x19    /* MII Data register 1 */
+#define REG_MII_DATA2   0x1a    /* MII Data register 2 */
+#define REG_MII_DATA3   0x1b    /* MII Data register 3 */
+
+#define REG_MII_PAGE_ENABLE     BIT(0)
+#define REG_MII_ADDR_WRITE      BIT(0)
+#define REG_MII_ADDR_READ       BIT(1)
+
+static int b53_mdio_op(struct b53_device *dev, u8 page, u8 reg, u16 op)
+{
+       int i;
+       u16 v;
+       int ret;
+       struct mii_bus *bus = dev->priv;
+
+       if (dev->current_page != page) {
+               /* set page number */
+               v = (page << 8) | REG_MII_PAGE_ENABLE;
+               ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_PAGE, v);
+               if (ret)
+                       return ret;
+               dev->current_page = page;
+       }
+
+       /* set register address */
+       v = (reg << 8) | op;
+       ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_ADDR, v);
+       if (ret)
+               return ret;
+
+       /* check if operation completed */
+       for (i = 0; i < 5; ++i) {
+               v = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_ADDR);
+               if (!(v & (REG_MII_ADDR_WRITE | REG_MII_ADDR_READ)))
+                       break;
+               usleep_range(10, 100);
+       }
+
+       if (WARN_ON(i == 5))
+               return -EIO;
+
+       return 0;
+}
+
+static int b53_mdio_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+       struct mii_bus *bus = dev->priv;
+       int ret;
+
+       ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+       if (ret)
+               return ret;
+
+       *val = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0) & 0xff;
+
+       return 0;
+}
+
+static int b53_mdio_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+       struct mii_bus *bus = dev->priv;
+       int ret;
+
+       ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+       if (ret)
+               return ret;
+
+       *val = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0);
+
+       return 0;
+}
+
+static int b53_mdio_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+       struct mii_bus *bus = dev->priv;
+       int ret;
+
+       ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+       if (ret)
+               return ret;
+
+       *val = mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0);
+       *val |= mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA1) << 16;
+
+       return 0;
+}
+
+static int b53_mdio_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       struct mii_bus *bus = dev->priv;
+       u64 temp = 0;
+       int i;
+       int ret;
+
+       ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+       if (ret)
+               return ret;
+
+       for (i = 2; i >= 0; i--) {
+               temp <<= 16;
+               temp |= mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i);
+       }
+
+       *val = temp;
+
+       return 0;
+}
+
+static int b53_mdio_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       struct mii_bus *bus = dev->priv;
+       u64 temp = 0;
+       int i;
+       int ret;
+
+       ret = b53_mdio_op(dev, page, reg, REG_MII_ADDR_READ);
+       if (ret)
+               return ret;
+
+       for (i = 3; i >= 0; i--) {
+               temp <<= 16;
+               temp |= mdiobus_read(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i);
+       }
+
+       *val = temp;
+
+       return 0;
+}
+
+static int b53_mdio_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+       struct mii_bus *bus = dev->priv;
+       int ret;
+
+       ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0, value);
+       if (ret)
+               return ret;
+
+       return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write16(struct b53_device *dev, u8 page, u8 reg,
+                            u16 value)
+{
+       struct mii_bus *bus = dev->priv;
+       int ret;
+
+       ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0, value);
+       if (ret)
+               return ret;
+
+       return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static int b53_mdio_write32(struct b53_device *dev, u8 page, u8 reg,
+                                   u32 value)
+{
+       struct mii_bus *bus = dev->priv;
+       unsigned int i;
+       u32 temp = value;
+
+       for (i = 0; i < 2; i++) {
+               int ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i,
+                                   temp & 0xffff);
+               if (ret)
+                       return ret;
+               temp >>= 16;
+       }
+
+       return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+
+}
+
+static int b53_mdio_write48(struct b53_device *dev, u8 page, u8 reg,
+                                   u64 value)
+{
+       struct mii_bus *bus = dev->priv;
+       unsigned i;
+       u64 temp = value;
+
+       for (i = 0; i < 3; i++) {
+               int ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i,
+                                   temp & 0xffff);
+               if (ret)
+                       return ret;
+               temp >>= 16;
+       }
+
+       return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+
+}
+
+static int b53_mdio_write64(struct b53_device *dev, u8 page, u8 reg,
+                            u64 value)
+{
+       struct mii_bus *bus = dev->priv;
+       unsigned i;
+       u64 temp = value;
+
+       for (i = 0; i < 4; i++) {
+               int ret = mdiobus_write(bus, B53_PSEUDO_PHY, REG_MII_DATA0 + i,
+                                   temp & 0xffff);
+               if (ret)
+                       return ret;
+               temp >>= 16;
+       }
+
+       return b53_mdio_op(dev, page, reg, REG_MII_ADDR_WRITE);
+}
+
+static struct b53_io_ops b53_mdio_ops = {
+       .read8 = b53_mdio_read8,
+       .read16 = b53_mdio_read16,
+       .read32 = b53_mdio_read32,
+       .read48 = b53_mdio_read48,
+       .read64 = b53_mdio_read64,
+       .write8 = b53_mdio_write8,
+       .write16 = b53_mdio_write16,
+       .write32 = b53_mdio_write32,
+       .write48 = b53_mdio_write48,
+       .write64 = b53_mdio_write64,
+};
+
+static int b53_phy_probe(struct phy_device *phydev)
+{
+       struct b53_device dev;
+       int ret;
+
+       /* allow the generic phy driver to take over */
+       if (phydev->addr != B53_PSEUDO_PHY && phydev->addr != 0)
+               return -ENODEV;
+
+       dev.current_page = 0xff;
+       dev.priv = phydev->bus;
+       dev.ops = &b53_mdio_ops;
+       dev.pdata = NULL;
+       mutex_init(&dev.reg_mutex);
+
+       ret = b53_switch_detect(&dev);
+       if (!ret)
+               return ret;
+
+       if (is5325(&dev) || is5365(&dev))
+               phydev->supported = SUPPORTED_100baseT_Full;
+       else
+               phydev->supported = SUPPORTED_1000baseT_Full;
+
+       phydev->advertising = phydev->supported;
+
+       return 0;
+}
+
+static int b53_phy_config_init(struct phy_device *phydev)
+{
+       struct b53_device *dev;
+       int ret;
+
+       dev = b53_switch_alloc(&phydev->dev, &b53_mdio_ops, phydev->bus);
+       if (!dev)
+               return -ENOMEM;
+
+       /* we don't use page 0xff, so force a page set */
+       dev->current_page = 0xff;
+       /* force the ethX as alias */
+       dev->sw_dev.alias = phydev->attached_dev->name;
+
+       ret = b53_switch_register(dev);
+       if (ret) {
+               pr_info("failed to register switch: %i\n", ret);
+               return ret;
+       }
+
+       phydev->priv = dev;
+
+       return 0;
+}
+
+static void b53_phy_remove(struct phy_device *phydev)
+{
+       struct b53_device *priv = phydev->priv;
+
+       if (!priv)
+               return;
+
+       b53_switch_remove(priv);
+
+       phydev->priv = NULL;
+}
+
+static int b53_phy_config_aneg(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static int b53_phy_read_status(struct phy_device *phydev)
+{
+       struct b53_device *priv = phydev->priv;
+
+       if (is5325(priv) || is5365(priv))
+               phydev->speed = 100;
+       else
+               phydev->speed = 1000;
+
+       phydev->duplex = DUPLEX_FULL;
+       phydev->link = 1;
+       phydev->state = PHY_RUNNING;
+
+       netif_carrier_on(phydev->attached_dev);
+       phydev->adjust_link(phydev->attached_dev);
+
+       return 0;
+}
+
+/* BCM5325, BCM539x */
+static struct phy_driver b53_phy_driver_id1 = {
+       .phy_id         = 0x0143bc00,
+       .name           = "Broadcom B53 (1)",
+       .phy_id_mask    = 0x1ffffc00,
+       .features       = 0,
+       .probe          = b53_phy_probe,
+       .remove         = b53_phy_remove,
+       .config_aneg    = b53_phy_config_aneg,
+       .config_init    = b53_phy_config_init,
+       .read_status    = b53_phy_read_status,
+       .driver = {
+               .owner = THIS_MODULE,
+       },
+};
+
+/* BCM53125 */
+static struct phy_driver b53_phy_driver_id2 = {
+       .phy_id         = 0x03625c00,
+       .name           = "Broadcom B53 (2)",
+       .phy_id_mask    = 0x1ffffc00,
+       .features       = 0,
+       .probe          = b53_phy_probe,
+       .remove         = b53_phy_remove,
+       .config_aneg    = b53_phy_config_aneg,
+       .config_init    = b53_phy_config_init,
+       .read_status    = b53_phy_read_status,
+       .driver = {
+               .owner = THIS_MODULE,
+       },
+};
+
+int __init b53_phy_driver_register(void)
+{
+       int ret;
+
+       ret = phy_driver_register(&b53_phy_driver_id1);
+       if (ret)
+               return ret;
+
+       ret = phy_driver_register(&b53_phy_driver_id2);
+       if (ret)
+               phy_driver_unregister(&b53_phy_driver_id1);
+
+       return ret;
+}
+
+void __exit b53_phy_driver_unregister(void)
+{
+       phy_driver_unregister(&b53_phy_driver_id2);
+       phy_driver_unregister(&b53_phy_driver_id1);
+}
+
+module_init(b53_phy_driver_register);
+module_exit(b53_phy_driver_unregister);
+
+MODULE_DESCRIPTION("B53 MDIO access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c b/target/linux/generic/files/drivers/net/phy/b53/b53_mmap.c
new file mode 100644 (file)
index 0000000..1fd0158
--- /dev/null
@@ -0,0 +1,241 @@
+/*
+ * B53 register access through memory mapped registers
+ *
+ * Copyright (C) 2012-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_priv.h"
+
+static int b53_mmap_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+       u8 __iomem *regs = dev->priv;
+
+       *val = readb(regs + (page << 8) + reg);
+
+       return 0;
+}
+
+static int b53_mmap_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 2))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian)
+               *val = readw_be(regs + (page << 8) + reg);
+       else
+               *val = readw(regs + (page << 8) + reg);
+
+       return 0;
+}
+
+static int b53_mmap_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 4))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian)
+               *val = readl_be(regs + (page << 8) + reg);
+       else
+               *val = readl(regs + (page << 8) + reg);
+
+       return 0;
+}
+
+static int b53_mmap_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 4))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian) {
+               *val = readl_be(regs + (page << 8) + reg);
+               *val <<= 16;
+               *val |= readw_be(regs + (page << 8) + reg + 4);
+       } else {
+               *val |= readw(regs + (page << 8) + reg + 4);
+               *val <<= 32;
+               *val = readl(regs + (page << 8) + reg);
+       }
+
+       return 0;
+}
+
+static int b53_mmap_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       u8 __iomem *regs = dev->priv;
+       u32 hi, lo;
+
+       if (WARN_ON(reg % 4))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian) {
+               lo = readl_be(regs + (page << 8) + reg);
+               hi = readl_be(regs + (page << 8) + reg + 4);
+       } else {
+               lo = readl(regs + (page << 8) + reg);
+               hi = readl(regs + (page << 8) + reg + 4);
+       }
+
+       *val = ((u64)hi << 32) | lo;
+
+       return 0;
+}
+
+static int b53_mmap_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+       u8 __iomem *regs = dev->priv;
+
+       writeb(value, regs + (page << 8) + reg);
+
+       return 0;
+}
+
+static int b53_mmap_write16(struct b53_device *dev, u8 page, u8 reg,
+                            u16 value)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 2))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian)
+               writew_be(value, regs + (page << 8) + reg);
+       else
+               writew(value, regs + (page << 8) + reg);
+
+       return 0;
+}
+
+static int b53_mmap_write32(struct b53_device *dev, u8 page, u8 reg,
+                                   u32 value)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 4))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian)
+               writel_be(value, regs + (page << 8) + reg);
+       else
+               writel(value, regs + (page << 8) + reg);
+
+       return 0;
+}
+
+static int b53_mmap_write48(struct b53_device *dev, u8 page, u8 reg,
+                                   u64 value)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 4))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian) {
+               writel_be((u32)(value >> 16), regs + (page << 8) + reg);
+               writew_be((u16)value, regs + (page << 8) + reg + 4);
+       } else {
+               writel((u32)value, regs + (page << 8) + reg);
+               writew((u16)(value >> 32), regs + (page << 8) + reg + 4);
+       }
+
+       return 0;
+}
+
+static int b53_mmap_write64(struct b53_device *dev, u8 page, u8 reg,
+                            u64 value)
+{
+       u8 __iomem *regs = dev->priv;
+
+       if (WARN_ON(reg % 4))
+               return -EINVAL;
+
+       if (dev->pdata && dev->pdata->big_endian) {
+               writel_be((u32)(value >> 32), regs + (page << 8) + reg);
+               writel_be((u32)value, regs + (page << 8) + reg + 4);
+       } else {
+               writel((u32)value, regs + (page << 8) + reg);
+               writel((u32)(value >> 32), regs + (page << 8) + reg + 4);
+       }
+
+       return 0;
+}
+
+static struct b53_io_ops b53_mmap_ops = {
+       .read8 = b53_mmap_read8,
+       .read16 = b53_mmap_read16,
+       .read32 = b53_mmap_read32,
+       .read48 = b53_mmap_read48,
+       .read64 = b53_mmap_read64,
+       .write8 = b53_mmap_write8,
+       .write16 = b53_mmap_write16,
+       .write32 = b53_mmap_write32,
+       .write48 = b53_mmap_write48,
+       .write64 = b53_mmap_write64,
+};
+
+static int b53_mmap_probe(struct platform_device *pdev)
+{
+       struct b53_platform_data *pdata = pdev->dev.platform_data;
+       struct b53_device *dev;
+
+       if (!pdata)
+               return -EINVAL;
+
+       dev = b53_switch_alloc(&pdev->dev, &b53_mmap_ops, pdata->regs);
+       if (!dev)
+               return -ENOMEM;
+
+       if (pdata)
+               dev->pdata = pdata;
+
+       pdev->dev.platform_data = dev;
+
+       return b53_switch_register(dev);
+}
+
+static int b53_mmap_remove(struct platform_device *pdev)
+{
+       struct b53_device *dev = pdev->dev.platform_data;
+
+       if (dev) {
+               pdev->dev.platform_data = dev->pdata;
+               b53_switch_remove(dev);
+       }
+
+       return 0;
+}
+
+static struct platform_driver b53_mmap_driver = {
+       .probe = b53_mmap_probe,
+       .remove = b53_mmap_remove,
+       .driver = {
+               .name = "b53-switch",
+       },
+};
+
+module_platform_driver(b53_mmap_driver);
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 MMAP access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c b/target/linux/generic/files/drivers/net/phy/b53/b53_phy_fixup.c
new file mode 100644 (file)
index 0000000..447f30b
--- /dev/null
@@ -0,0 +1,53 @@
+/*
+ * B53 PHY Fixup call
+ *
+ * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/phy.h>
+
+#define B53_PSEUDO_PHY 0x1e /* Register Access Pseudo PHY */
+
+#define B53_BRCM_OUI_1 0x0143bc00
+#define B53_BRCM_OUI_2 0x03625c00
+
+static int b53_phy_fixup(struct phy_device *dev)
+{
+       u32 phy_id;
+       struct mii_bus *bus = dev->bus;
+
+       if (dev->addr != B53_PSEUDO_PHY)
+               return 0;
+
+       /* read the first port's id */
+       phy_id = mdiobus_read(bus, 0, 2) << 16;
+       phy_id |= mdiobus_read(bus, 0, 3);
+
+       if ((phy_id & 0xfffffc00) == B53_BRCM_OUI_1 ||
+           (phy_id & 0xfffffc00) == B53_BRCM_OUI_2) {
+               dev->phy_id = phy_id;
+       }
+
+       return 0;
+}
+
+int __init b53_phy_fixup_register(void)
+{
+       return phy_register_fixup_for_id(PHY_ANY_ID, b53_phy_fixup);
+}
+
+subsys_initcall(b53_phy_fixup_register);
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h b/target/linux/generic/files/drivers/net/phy/b53/b53_priv.h
new file mode 100644 (file)
index 0000000..fca74ae
--- /dev/null
@@ -0,0 +1,278 @@
+/*
+ * B53 common definitions
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_PRIV_H
+#define __B53_PRIV_H
+
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/switch.h>
+
+struct b53_device;
+
+struct b53_io_ops {
+       int (*read8)(struct b53_device *dev, u8 page, u8 reg, u8 *value);
+       int (*read16)(struct b53_device *dev, u8 page, u8 reg, u16 *value);
+       int (*read32)(struct b53_device *dev, u8 page, u8 reg, u32 *value);
+       int (*read48)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
+       int (*read64)(struct b53_device *dev, u8 page, u8 reg, u64 *value);
+       int (*write8)(struct b53_device *dev, u8 page, u8 reg, u8 value);
+       int (*write16)(struct b53_device *dev, u8 page, u8 reg, u16 value);
+       int (*write32)(struct b53_device *dev, u8 page, u8 reg, u32 value);
+       int (*write48)(struct b53_device *dev, u8 page, u8 reg, u64 value);
+       int (*write64)(struct b53_device *dev, u8 page, u8 reg, u64 value);
+};
+
+enum {
+       BCM5325_DEVICE_ID = 0x25,
+       BCM5365_DEVICE_ID = 0x65,
+       BCM5395_DEVICE_ID = 0x95,
+       BCM5397_DEVICE_ID = 0x97,
+       BCM5398_DEVICE_ID = 0x98,
+       BCM53115_DEVICE_ID = 0x53115,
+       BCM53125_DEVICE_ID = 0x53125,
+       BCM63XX_DEVICE_ID = 0x6300,
+};
+
+#define B53_N_PORTS    9
+#define B53_N_PORTS_25 6
+
+struct b53_vlan {
+       unsigned int    members:B53_N_PORTS;
+       unsigned int    untag:B53_N_PORTS;
+};
+
+struct b53_port {
+       unsigned int    pvid:12;
+};
+
+struct b53_device {
+       struct switch_dev sw_dev;
+       struct b53_platform_data *pdata;
+
+       struct mutex reg_mutex;
+       const struct b53_io_ops *ops;
+
+       /* chip specific data */
+       u32 chip_id;
+       u8 core_rev;
+       u8 vta_regs[3];
+       u8 duplex_reg;
+       u8 jumbo_pm_reg;
+       u8 jumbo_size_reg;
+
+       /* used ports mask */
+       u16 enabled_ports;
+
+       /* connect specific data */
+       u8 current_page;
+       struct device *dev;
+       void *priv;
+
+       /* run time configuration */
+       unsigned enable_vlan:1;
+       unsigned enable_jumbo:1;
+       unsigned allow_vid_4095:1;
+
+       struct b53_port *ports;
+       struct b53_vlan *vlans;
+
+       char *buf;
+};
+
+#define b53_for_each_port(dev, i) \
+       for (i = 0; i < B53_N_PORTS; i++) \
+               if (dev->enabled_ports & BIT(i))
+
+
+
+static inline int is5325(struct b53_device *dev)
+{
+       return dev->chip_id == BCM5325_DEVICE_ID;
+}
+
+static inline int is5365(struct b53_device *dev)
+{
+#ifdef CONFIG_BCM47XX
+       return dev->chip_id == BCM5365_DEVICE_ID;
+#else
+       return 0;
+#endif
+}
+
+static inline int is5397_98(struct b53_device *dev)
+{
+       return dev->chip_id == BCM5397_DEVICE_ID ||
+               dev->chip_id == BCM5398_DEVICE_ID;
+}
+
+static inline int is531x5(struct b53_device *dev)
+{
+       return dev->chip_id == BCM53115_DEVICE_ID ||
+               dev->chip_id == BCM53125_DEVICE_ID;
+}
+
+static inline int is63xx(struct b53_device *dev)
+{
+#ifdef CONFIG_BCM63XX
+       return dev->chip_id == BCM63XX_DEVICE_ID;
+#else
+       return 0;
+#endif
+}
+
+#define B53_CPU_PORT_25        5
+#define B53_CPU_PORT   8
+
+static inline int is_cpu_port(struct b53_device *dev, int port)
+{
+       return dev->sw_dev.cpu_port == port;
+}
+
+static inline struct b53_device *sw_to_b53(struct switch_dev *sw)
+{
+       return container_of(sw, struct b53_device, sw_dev);
+}
+
+struct b53_device *b53_switch_alloc(struct device *base, struct b53_io_ops *ops,
+                                   void *priv);
+
+int b53_switch_detect(struct b53_device *dev);
+
+int b53_switch_register(struct b53_device *dev);
+
+static inline void b53_switch_remove(struct b53_device *dev)
+{
+       unregister_switch(&dev->sw_dev);
+}
+
+static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read8(dev, page, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read16(dev, page, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read32(dev, page, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read48(dev, page, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->read64(dev, page, reg, val);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write8(dev, page, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg,
+                             u16 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write16(dev, page, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg,
+                             u32 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write32(dev, page, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg,
+                             u64 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write48(dev, page, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
+                              u64 value)
+{
+       int ret;
+
+       mutex_lock(&dev->reg_mutex);
+       ret = dev->ops->write64(dev, page, reg, value);
+       mutex_unlock(&dev->reg_mutex);
+
+       return ret;
+}
+
+#endif
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h
new file mode 100644 (file)
index 0000000..7b8f539
--- /dev/null
@@ -0,0 +1,308 @@
+/*
+ * B53 register definitions
+ *
+ * Copyright (C) 2004 Broadcom Corporation
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_REGS_H
+#define __B53_REGS_H
+
+/* Management Port (SMP) Page offsets */
+#define B53_CTRL_PAGE                  0x00 /* Control */
+#define B53_STAT_PAGE                  0x01 /* Status */
+#define B53_MGMT_PAGE                  0x02 /* Management Mode */
+#define B53_MIB_AC_PAGE                        0x03 /* MIB Autocast */
+#define B53_ARLCTRL_PAGE               0x04 /* ARL Control */
+#define B53_ARLIO_PAGE                 0x05 /* ARL Access */
+#define B53_FRAMEBUF_PAGE              0x06 /* Management frame access */
+#define B53_MEM_ACCESS_PAGE            0x08 /* Memory access */
+
+/* PHY Registers */
+#define B53_PORT_MII_PAGE(i)           (0x10 + i) /* Port i MII Registers */
+#define B53_IM_PORT_PAGE               0x18 /* Inverse MII Port (to EMAC) */
+#define B53_ALL_PORT_PAGE              0x19 /* All ports MII (broadcast) */
+
+/* MIB registers */
+#define B53_MIB_PAGE(i)                        (0x20 + i)
+
+/* Quality of Service (QoS) Registers */
+#define B53_QOS_PAGE                   0x30
+
+/* Port VLAN Page */
+#define B53_PVLAN_PAGE                 0x31
+
+/* VLAN Registers */
+#define B53_VLAN_PAGE                  0x34
+
+/* Jumbo Frame Registers */
+#define B53_JUMBO_PAGE                 0x40
+
+/*************************************************************************
+ * Control Page registers
+ *************************************************************************/
+
+/* Port Control Register (8 bit) */
+#define B53_PORT_CTRL(i)               (0x00 + i)
+#define   PORT_CTRL_RX_DISABLE         BIT(0)
+#define   PORT_CTRL_TX_DISABLE         BIT(1)
+#define   PORT_CTRL_RX_BCST_EN         BIT(2) /* Broadcast RX (P8 only) */
+#define   PORT_CTRL_RX_MCST_EN         BIT(3) /* Multicast RX (P8 only) */
+#define   PORT_CTRL_RX_UCST_EN         BIT(4) /* Unicast RX (P8 only) */
+#define          PORT_CTRL_STP_STATE_S         5
+#define   PORT_CTRL_STP_STATE_MASK     (0x3 << PORT_CTRL_STP_STATE_S)
+
+/* SMP Control Register (8 bit) */
+#define B53_SMP_CTRL                   0x0a
+
+/* Switch Mode Control Register (8 bit) */
+#define B53_SWITCH_MODE                        0x0b
+#define   SM_SW_FWD_MODE               BIT(0)  /* 1 = Managed Mode */
+#define   SM_SW_FWD_EN                 BIT(1)  /* Forwarding Enable */
+
+/* IMP Port state override register (8 bit) */
+#define B53_PORT_OVERRIDE_CTRL         0x0e
+#define   PORT_OVERRIDE_LINK           BIT(0)
+#define   PORT_OVERRIDE_HALF_DUPLEX    BIT(1) /* 0 = Full Duplex */
+#define   PORT_OVERRIDE_SPEED_S                2
+#define   PORT_OVERRIDE_SPEED_10M      (0 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_SPEED_100M     (1 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_SPEED_1000M    (2 << PORT_OVERRIDE_SPEED_S)
+#define   PORT_OVERRIDE_RV_MII_25      BIT(4) /* BCM5325 only */
+#define   PORT_OVERRIDE_RX_FLOW                BIT(4)
+#define   PORT_OVERRIDE_TX_FLOW                BIT(5)
+#define   PORT_OVERRIDE_EN             BIT(7) /* Use the register contents */
+
+/* Power-down mode control */
+#define B53_PD_MODE_CTRL_25            0x0f
+
+/* IP Multicast control (8 bit) */
+#define B53_IP_MULTICAST_CTRL          0x21
+#define  B53_IPMC_FWD_EN               BIT(1)
+#define  B53_UC_FWD_EN                 BIT(6)
+#define  B53_MC_FWD_EN                 BIT(7)
+
+/* (16 bit) */
+#define B53_UC_FLOOD_MASK              0x32
+#define B53_MC_FLOOD_MASK              0x34
+#define B53_IPMC_FLOOD_MASK            0x36
+
+/* Software reset register (8 bit) */
+#define B53_SOFTRESET                  0x79
+
+/* Fast Aging Control register (8 bit) */
+#define B53_FAST_AGE_CTRL              0x88
+#define   FAST_AGE_STATIC              BIT(0)
+#define   FAST_AGE_DYNAMIC             BIT(1)
+#define   FAST_AGE_PORT                        BIT(2)
+#define   FAST_AGE_VLAN                        BIT(3)
+#define   FAST_AGE_STP                 BIT(4)
+#define   FAST_AGE_MC                  BIT(5)
+#define   FAST_AGE_DONE                        BIT(7)
+
+/*************************************************************************
+ * Status Page registers
+ *************************************************************************/
+
+/* Link Status Summary Register (16bit) */
+#define B53_LINK_STAT                  0x00
+
+/* Link Status Change Register (16 bit) */
+#define B53_LINK_STAT_CHANGE           0x02
+
+/* Port Speed Summary Register (16 bit for FE, 32 bit for GE) */
+#define B53_SPEED_STAT                 0x04
+#define  SPEED_PORT_FE(reg, port)      (((reg) >> (port)) & 1)
+#define  SPEED_PORT_GE(reg, port)      (((reg) >> 2 * (port)) & 3)
+#define  SPEED_STAT_10M                        0
+#define  SPEED_STAT_100M               1
+#define  SPEED_STAT_1000M              2
+
+/* Duplex Status Summary (16 bit) */
+#define B53_DUPLEX_STAT_FE             0x06
+#define B53_DUPLEX_STAT_GE             0x08
+#define B53_DUPLEX_STAT_63XX           0x0c
+
+/* Strap Value (48 bit) */
+#define B53_STRAP_VALUE                        0x70
+#define   SV_GMII_CTRL_115             BIT(27)
+
+/*************************************************************************
+ * Management Mode Page Registers
+ *************************************************************************/
+
+/* Global Management Config Register (8 bit) */
+#define B53_GLOBAL_CONFIG              0x00
+#define   GC_RESET_MIB                 0x01
+#define   GC_RX_BPDU_EN                        0x02
+#define   GC_MIB_AC_HDR_EN             0x10
+#define   GC_MIB_AC_EN                 0x20
+#define   GC_FRM_MGMT_PORT_M           0xC0
+#define   GC_FRM_MGMT_PORT_04          0x00
+#define   GC_FRM_MGMT_PORT_MII         0x80
+
+/* Device ID register (8 or 32 bit) */
+#define B53_DEVICE_ID                  0x30
+
+/* Revision ID register (8 bit) */
+#define B53_REV_ID                     0x40
+
+/*************************************************************************
+ * ARL Access Page Registers
+ *************************************************************************/
+
+/* VLAN Table Access Register (8 bit) */
+#define B53_VT_ACCESS                  0x80
+#define B53_VT_ACCESS_9798             0x60 /* for BCM5397/BCM5398 */
+#define B53_VT_ACCESS_63XX             0x60 /* for BCM6328/62/68 */
+#define   VTA_CMD_WRITE                        0
+#define   VTA_CMD_READ                 1
+#define   VTA_CMD_CLEAR                        2
+#define   VTA_START_CMD                        BIT(7)
+
+/* VLAN Table Index Register (16 bit) */
+#define B53_VT_INDEX                   0x81
+#define B53_VT_INDEX_9798              0x61
+#define B53_VT_INDEX_63XX              0x62
+
+/* VLAN Table Entry Register (32 bit) */
+#define B53_VT_ENTRY                   0x83
+#define B53_VT_ENTRY_9798              0x63
+#define B53_VT_ENTRY_63XX              0x64
+#define   VTE_MEMBERS                  0x1ff
+#define   VTE_UNTAG_S                  9
+#define   VTE_UNTAG                    (0x1ff << 9)
+
+/*************************************************************************
+ * Port VLAN Registers
+ *************************************************************************/
+
+/* Port VLAN mask (16 bit) IMP port is always 8, also on 5325 & co */
+#define B53_PVLAN_PORT_MASK(i)         ((i) * 2)
+
+/*************************************************************************
+ * 802.1Q Page Registers
+ *************************************************************************/
+
+/* Global QoS Control (8 bit) */
+#define B53_QOS_GLOBAL_CTL             0x00
+
+/* Enable 802.1Q for individual Ports (16 bit) */
+#define B53_802_1P_EN                  0x04
+
+/*************************************************************************
+ * VLAN Page Registers
+ *************************************************************************/
+
+/* VLAN Control 0 (8 bit) */
+#define B53_VLAN_CTRL0                 0x00
+#define   VC0_8021PF_CTRL_MASK         0x3
+#define   VC0_8021PF_CTRL_NONE         0x0
+#define   VC0_8021PF_CTRL_CHANGE_PRI   0x1
+#define   VC0_8021PF_CTRL_CHANGE_VID   0x2
+#define   VC0_8021PF_CTRL_CHANGE_BOTH  0x3
+#define   VC0_8021QF_CTRL_MASK         0xc
+#define   VC0_8021QF_CTRL_CHANGE_PRI   0x1
+#define   VC0_8021QF_CTRL_CHANGE_VID   0x2
+#define   VC0_8021QF_CTRL_CHANGE_BOTH  0x3
+#define   VC0_RESERVED_1               BIT(1)
+#define   VC0_DROP_VID_MISS            BIT(4)
+#define   VC0_VID_HASH_VID             BIT(5)
+#define   VC0_VID_CHK_EN               BIT(6)  /* Use VID,DA or VID,SA */
+#define   VC0_VLAN_EN                  BIT(7)  /* 802.1Q VLAN Enabled */
+
+/* VLAN Control 1 (8 bit) */
+#define B53_VLAN_CTRL1                 0x01
+#define   VC1_RX_MCST_TAG_EN           BIT(1)
+#define   VC1_RX_MCST_FWD_EN           BIT(2)
+#define   VC1_RX_MCST_UNTAG_EN         BIT(3)
+
+/* VLAN Control 2 (8 bit) */
+#define B53_VLAN_CTRL2                 0x02
+
+/* VLAN Control 3 (8 bit when BCM5325, 16 bit else) */
+#define B53_VLAN_CTRL3                 0x03
+#define B53_VLAN_CTRL3_63XX            0x04
+#define   VC3_MAXSIZE_1532             BIT(6) /* 5325 only */
+#define   VC3_HIGH_8BIT_EN             BIT(7) /* 5325 only */
+
+/* VLAN Control 4 (8 bit) */
+#define B53_VLAN_CTRL4                 0x05
+#define B53_VLAN_CTRL4_25              0x04
+#define B53_VLAN_CTRL4_63XX            0x06
+#define   VC4_ING_VID_CHECK_S          6
+#define   VC4_ING_VID_CHECK_MASK       (0x3 << VC4_ING_VID_CHECK_S)
+#define   VC4_ING_VID_VIO_FWD          0 /* forward, but do not learn */
+#define   VC4_ING_VID_VIO_DROP         1 /* drop VID violations */
+#define   VC4_NO_ING_VID_CHK           2 /* do not check */
+#define   VC4_ING_VID_VIO_TO_IMP       3 /* redirect to MII port */
+
+/* VLAN Control 5 (8 bit) */
+#define B53_VLAN_CTRL5                 0x06
+#define B53_VLAN_CTRL5_25              0x05
+#define B53_VLAN_CTRL5_63XX            0x07
+#define   VC5_VID_FFF_EN               BIT(2)
+#define   VC5_DROP_VTABLE_MISS         BIT(3)
+
+/* VLAN Control 6 (8 bit) */
+#define B53_VLAN_CTRL6                 0x07
+#define B53_VLAN_CTRL6_63XX            0x08
+
+/* VLAN Table Access Register (16 bit) */
+#define B53_VLAN_TABLE_ACCESS_25       0x06    /* BCM5325E/5350 */
+#define B53_VLAN_TABLE_ACCESS_65       0x08    /* BCM5365 */
+#define   VTA_VID_LOW_MASK_25          0xf
+#define   VTA_VID_LOW_MASK_65          0xff
+#define   VTA_VID_HIGH_S_25            4
+#define   VTA_VID_HIGH_S_65            8
+#define   VTA_VID_HIGH_MASK_25         (0xff << VTA_VID_HIGH_S_25E)
+#define   VTA_VID_HIGH_MASK_65         (0xf << VTA_VID_HIGH_S_65)
+#define   VTA_RW_STATE                 BIT(12)
+#define   VTA_RW_STATE_RD              0
+#define   VTA_RW_STATE_WR              BIT(12)
+#define   VTA_RW_OP_EN                 BIT(13)
+
+/* VLAN Read/Write Registers for (16/32 bit) */
+#define B53_VLAN_WRITE_25              0x08
+#define B53_VLAN_WRITE_65              0x0a
+#define B53_VLAN_READ                  0x0c
+#define   VA_MEMBER_MASK               0x3f
+#define   VA_UNTAG_S                   6
+#define   VA_UNTAG_MASK                        (0x3f << VA_UNTAG_S)
+#define   VA_VID_HIGH_S                        12
+#define   VA_VID_HIGH_MASK             (0xffff << VA_VID_HIGH_S)
+#define   VA_VALID_25                  BIT(20)
+#define   VA_VALID_25_R4               BIT(24)
+#define   VA_VALID_65                  BIT(14)
+
+/* VLAN Port Default Tag (16 bit) */
+#define B53_VLAN_PORT_DEF_TAG(i)       (0x10 + 2 * (i))
+
+/*************************************************************************
+ * Jumbo Frame Page Registers
+ *************************************************************************/
+
+/* Jumbo Enable Port Mask (bit i == port i enabled) (32 bit) */
+#define B53_JUMBO_PORT_MASK            0x01
+#define B53_JUMBO_PORT_MASK_63XX       0x04
+#define   JPM_10_100_JUMBO_EN          BIT(24) /* GigE always enabled */
+
+/* Good Frame Max Size without 802.1Q TAG (16 bit) */
+#define B53_JUMBO_MAX_SIZE             0x05
+#define B53_JUMBO_MAX_SIZE_63XX                0x08
+#define   JMS_MIN_SIZE                 1518
+#define   JMS_MAX_SIZE                 9724
+
+#endif /* !__B53_REGS_H */
diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_spi.c b/target/linux/generic/files/drivers/net/phy/b53/b53_spi.c
new file mode 100644 (file)
index 0000000..9c70d1f
--- /dev/null
@@ -0,0 +1,329 @@
+/*
+ * B53 register access through SPI
+ *
+ * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/platform_data/b53.h>
+
+#include "b53_priv.h"
+
+#define B53_SPI_DATA           0xf0
+
+#define B53_SPI_STATUS         0xfe
+#define B53_SPI_CMD_SPIF       BIT(7)
+#define B53_SPI_CMD_RACK       BIT(5)
+
+#define B53_SPI_CMD_READ       0x00
+#define B53_SPI_CMD_WRITE      0x01
+#define B53_SPI_CMD_NORMAL     0x60
+#define B53_SPI_CMD_FAST       0x10
+
+#define B53_SPI_PAGE_SELECT    0xff
+
+static inline int b53_spi_read_reg(struct spi_device *spi, u8 reg, u8 *val,
+                                    unsigned len)
+{
+       u8 txbuf[2];
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_READ;
+       txbuf[1] = reg;
+
+       return spi_write_then_read(spi, txbuf, 2, val, len);
+}
+
+static inline int b53_spi_clear_status(struct spi_device *spi)
+{
+       unsigned int i;
+       u8 rxbuf;
+       int ret;
+
+       for (i = 0; i < 10; i++) {
+               ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
+               if (ret)
+                       return ret;
+
+               if (!(rxbuf & B53_SPI_CMD_SPIF))
+                       break;
+
+               mdelay(1);
+       }
+
+       if (i == 10)
+               return -EIO;
+
+       return 0;
+}
+
+static inline int b53_spi_set_page(struct spi_device *spi, u8 page)
+{
+       u8 txbuf[3];
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+       txbuf[1] = B53_SPI_PAGE_SELECT;
+       txbuf[2] = page;
+
+       return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static inline int b53_prepare_reg_access(struct spi_device *spi, u8 page)
+{
+       int ret = b53_spi_clear_status(spi);
+       if (ret)
+               return ret;
+
+       return b53_spi_set_page(spi, page);
+}
+
+static int b53_spi_prepare_reg_read(struct spi_device *spi, u8 reg)
+{
+       u8 rxbuf;
+       int retry_count;
+       int ret;
+
+       ret = b53_spi_read_reg(spi, reg, &rxbuf, 1);
+       if (ret)
+               return ret;
+
+       for (retry_count = 0; retry_count < 10; retry_count++) {
+               ret = b53_spi_read_reg(spi, B53_SPI_STATUS, &rxbuf, 1);
+               if (ret)
+                       return ret;
+
+               if (rxbuf & B53_SPI_CMD_RACK)
+                       break;
+
+               mdelay(1);
+       }
+
+       if (retry_count == 10)
+               return -EIO;
+
+       return 0;
+}
+
+static int b53_spi_read(struct b53_device *dev, u8 page, u8 reg, u8 *data,
+                       unsigned len)
+{
+       struct spi_device *spi = dev->priv;
+       int ret;
+
+       ret = b53_prepare_reg_access(spi, page);
+       if (ret)
+               return ret;
+
+       ret = b53_spi_prepare_reg_read(spi, reg);
+       if (ret)
+               return ret;
+
+       return b53_spi_read_reg(spi, B53_SPI_DATA, data, len);
+}
+
+static int b53_spi_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
+{
+       return b53_spi_read(dev, page, reg, val, 1);
+}
+
+static int b53_spi_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
+{
+       int ret = b53_spi_read(dev, page, reg, (u8 *)val, 2);
+       if (!ret)
+               *val = le16_to_cpu(*val);
+
+       return ret;
+}
+
+static int b53_spi_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
+{
+       int ret = b53_spi_read(dev, page, reg, (u8 *)val, 4);
+       if (!ret)
+               *val = le32_to_cpu(*val);
+
+       return ret;
+}
+
+static int b53_spi_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       int ret;
+
+       *val = 0;
+       ret = b53_spi_read(dev, page, reg, (u8 *)val, 6);
+       if (!ret)
+               *val = le64_to_cpu(*val);
+
+       return ret;
+}
+
+static int b53_spi_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
+{
+       int ret = b53_spi_read(dev, page, reg, (u8 *)val, 8);
+       if (!ret)
+               *val = le64_to_cpu(*val);
+
+       return ret;
+}
+
+static int b53_spi_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
+{
+       struct spi_device *spi = dev->priv;
+       int ret;
+       u8 txbuf[3];
+
+       ret = b53_prepare_reg_access(spi, page);
+       if (ret)
+               return ret;
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+       txbuf[1] = reg;
+       txbuf[2] = value;
+
+       return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write16(struct b53_device *dev, u8 page, u8 reg, u16 value)
+{
+       struct spi_device *spi = dev->priv;
+       int ret;
+       u8 txbuf[4];
+
+       ret = b53_prepare_reg_access(spi, page);
+       if (ret)
+               return ret;
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+       txbuf[1] = reg;
+       put_unaligned_le16(value, &txbuf[2]);
+
+       return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write32(struct b53_device *dev, u8 page, u8 reg, u32 value)
+{
+       struct spi_device *spi = dev->priv;
+       int ret;
+       u8 txbuf[6];
+
+       ret = b53_prepare_reg_access(spi, page);
+       if (ret)
+               return ret;
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+       txbuf[1] = reg;
+       put_unaligned_le32(value, &txbuf[2]);
+
+       return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static int b53_spi_write48(struct b53_device *dev, u8 page, u8 reg, u64 value)
+{
+       struct spi_device *spi = dev->priv;
+       int ret;
+       u8 txbuf[10];
+
+       ret = b53_prepare_reg_access(spi, page);
+       if (ret)
+               return ret;
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+       txbuf[1] = reg;
+       put_unaligned_le64(value, &txbuf[2]);
+
+       return spi_write(spi, txbuf, sizeof(txbuf) - 2);
+}
+
+static int b53_spi_write64(struct b53_device *dev, u8 page, u8 reg, u64 value)
+{
+       struct spi_device *spi = dev->priv;
+       int ret;
+       u8 txbuf[10];
+
+       ret = b53_prepare_reg_access(spi, page);
+       if (ret)
+               return ret;
+
+       txbuf[0] = B53_SPI_CMD_NORMAL | B53_SPI_CMD_WRITE;
+       txbuf[1] = reg;
+       put_unaligned_le64(value, &txbuf[2]);
+
+       return spi_write(spi, txbuf, sizeof(txbuf));
+}
+
+static struct b53_io_ops b53_spi_ops = {
+       .read8 = b53_spi_read8,
+       .read16 = b53_spi_read16,
+       .read32 = b53_spi_read32,
+       .read48 = b53_spi_read48,
+       .read64 = b53_spi_read64,
+       .write8 = b53_spi_write8,
+       .write16 = b53_spi_write16,
+       .write32 = b53_spi_write32,
+       .write48 = b53_spi_write48,
+       .write64 = b53_spi_write64,
+};
+
+static int __devinit b53_spi_probe(struct spi_device *spi)
+{
+       struct b53_device *dev;
+       int ret;
+
+       dev = b53_switch_alloc(&spi->dev, &b53_spi_ops, spi);
+       if (!dev)
+               return -ENOMEM;
+
+       if (spi->dev.platform_data)
+               dev->pdata = spi->dev.platform_data;
+
+       ret = b53_switch_register(dev);
+       if (ret)
+               return ret;
+
+       spi->dev.platform_data = dev;
+
+       return 0;
+}
+
+static int __devexit b53_spi_remove(struct spi_device *spi)
+{
+       struct b53_device *dev = spi->dev.platform_data;
+
+       if (dev) {
+               struct b53_platform_data *pdata = dev->pdata;
+               b53_switch_remove(dev);
+               spi->dev.platform_data = pdata;
+       }
+
+       return 0;
+}
+
+static struct spi_driver b53_spi_driver = {
+       .driver = {
+               .name   = "b53-switch",
+               .bus    = &spi_bus_type,
+               .owner  = THIS_MODULE,
+       },
+       .probe  = b53_spi_probe,
+       .remove = __devexit_p(b53_spi_remove),
+};
+
+module_spi_driver(b53_spi_driver);
+
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("B53 SPI access driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/generic/files/include/linux/platform_data/b53.h b/target/linux/generic/files/include/linux/platform_data/b53.h
new file mode 100644 (file)
index 0000000..7842741
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ * B53 platform data
+ *
+ * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __B53_H
+#define __B53_H
+
+#include <linux/kernel.h>
+
+struct b53_platform_data {
+       u32 chip_id;
+       u16 enabled_ports;
+
+       /* allow to specify an ethX alias */
+       const char *alias;
+
+       /* only used by MMAP'd driver */
+       unsigned big_endian:1;
+       void __iomem *regs;
+};
+
+#endif
diff --git a/target/linux/generic/patches-3.6/730-phy_b53.patch b/target/linux/generic/patches-3.6/730-phy_b53.patch
new file mode 100644 (file)
index 0000000..3922d47
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -234,6 +234,8 @@ config RTL8367B_PHY
+ endif # RTL8366_SMI
++source "drivers/net/phy/b53/Kconfig"
++
+ endif # PHYLIB
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367B_PHY)   += rtl8367b.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL_PHY)      += micrel.o
+ obj-$(CONFIG_PSB6970_PHY)     += psb6970.o
++obj-$(CONFIG_B53)             += b53/
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)               += mdio-gpio.o
diff --git a/target/linux/generic/patches-3.7/730-phy_b53.patch b/target/linux/generic/patches-3.7/730-phy_b53.patch
new file mode 100644 (file)
index 0000000..75972e5
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -252,6 +252,8 @@ config RTL8367B_PHY
+ endif # RTL8366_SMI
++source "drivers/net/phy/b53/Kconfig"
++
+ endif # PHYLIB
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367B_PHY)   += rtl8367b.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL_PHY)      += micrel.o
+ obj-$(CONFIG_PSB6970_PHY)     += psb6970.o
++obj-$(CONFIG_B53)             += b53/
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)               += mdio-gpio.o
diff --git a/target/linux/generic/patches-3.8/730-phy_b53.patch b/target/linux/generic/patches-3.8/730-phy_b53.patch
new file mode 100644 (file)
index 0000000..75972e5
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -252,6 +252,8 @@ config RTL8367B_PHY
+ endif # RTL8366_SMI
++source "drivers/net/phy/b53/Kconfig"
++
+ endif # PHYLIB
+ config MICREL_KS8995MA
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367B_PHY)   += rtl8367b.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+ obj-$(CONFIG_MICREL_PHY)      += micrel.o
+ obj-$(CONFIG_PSB6970_PHY)     += psb6970.o
++obj-$(CONFIG_B53)             += b53/
+ obj-$(CONFIG_FIXED_PHY)               += fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)    += mdio-bitbang.o
+ obj-$(CONFIG_MDIO_GPIO)               += mdio-gpio.o