wp543)
status_led="wp543:green:diag"
;;
- wpj558)
- status_led="wpj558:green:sig3"
- ;;
wrt400n)
status_led="wrt400n:blue:wps"
;;
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
-wpj558)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
- ucidef_add_switch "switch0" "1" "1"
- ucidef_add_switch_vlan "switch0" "1" "5 6t"
- ucidef_add_switch_vlan "switch0" "2" "1 6t"
- ;;
-
ap121 |\
ap121-mini |\
ap96 |\
*WP543)
name="wp543"
;;
- *WPJ558)
- name="wpj558"
- ;;
*WPE72)
name="wpe72"
;;
ja76pf | \
ja76pf2 | \
jwap003 | \
- wpj558 | \
wp543 | \
wpe72)
[ "$magic" != "4349" ] && {
jwap003)
platform_do_upgrade_combined "$ARGV"
;;
- wpj558|\
wp543|\
wpe72)
platform_do_upgrade_compex "$ARGV"
CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
-CONFIG_ATH79_MACH_WPJ558=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y
CONFIG_ATH79_MACH_WZR_450HP2=y
+++ /dev/null
-/*
- * Compex WPJ558 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WPJ558_GPIO_LED_SIG1 14
-#define WPJ558_GPIO_LED_SIG2 15
-#define WPJ558_GPIO_LED_SIG3 22
-#define WPJ558_GPIO_LED_SIG4 23
-#define WPJ558_GPIO_BUZZER 4
-
-#define WPJ558_GPIO_BTN_RESET 17
-
-#define WPJ558_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPJ558_KEYS_DEBOUNCE_INTERVAL (3 * WPJ558_KEYS_POLL_INTERVAL)
-
-#define WPJ558_MAC0_OFFSET 0x10
-#define WPJ558_MAC1_OFFSET 0x18
-#define WPJ558_WMAC_CALDATA_OFFSET 0x1000
-#define WPJ558_PCIE_CALDATA_OFFSET 0x5000
-
-#define WPJ558_ART_SIZE 0x8000
-#if 0
-static char *art_buf;
-#endif
-
-static struct gpio_led wpj558_leds_gpio[] __initdata = {
- {
- .name = "wpj558:red:sig1",
- .gpio = WPJ558_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "wpj558:yellow:sig2",
- .gpio = WPJ558_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "wpj558:green:sig3",
- .gpio = WPJ558_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "wpj558:green:sig4",
- .gpio = WPJ558_GPIO_LED_SIG4,
- .active_low = 1,
- },
- {
- .name = "wpj558:buzzer",
- .gpio = WPJ558_GPIO_BUZZER,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button wpj558_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPJ558_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data wpj558_ar8327_data = {
- .pad0_cfg = &wpj558_ar8327_pad0_cfg,
- .pad6_cfg = &wpj558_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info wpj558_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .phy_addr = 0,
- .platform_data = &wpj558_ar8327_data,
- },
-};
-
-static void __init wpj558_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio),
- wpj558_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpj558_gpio_keys),
- wpj558_gpio_keys);
-
- ath79_init_mac(tmpmac, mac, -1);
- ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_register_pci();
-
- mdiobus_register_board_info(wpj558_mdio0_info,
- ARRAY_SIZE(wpj558_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ558_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ558_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup);
endef
$(eval $(call Profile,WPE72))
-
-
-define Profile/WPJ558
- NAME:=Compex WPJ558
- PACKAGES:=kmod-ath10k pciutils
-endef
-
-define Profile/WPJ558/Description
- Package set optimized for the Compex WPJ558 board.
-endef
-
-$(eval $(call Profile,WPJ558))
-
define Image/Build/MyLoader
$(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
$(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
+ $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
if [ -e "$(fwimage)" ]; then \
$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
- -p0x680000:0x160000:al:0x80060000:firmware:$(KDIR_TMP)/vmlinux-$(2).uImage \
- -p0x050000:0x630000:::rootfs:$(KDIR)/root.$(1) \
- -p0x7e0000:0x010000 \
- -p0x7f0000:0x010000 \
+ -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
$(call imgname,$(1),$(2))-$(5)-factory.img; \
echo -n "" > $(KDIR_TMP)/empty.bin; \
sh $(TOPDIR)/scripts/combined-image.sh \
$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
-$(eval $(call SingleProfile,MyLoader,64k,WPJ558_8M,wpj558,WPJ558,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WPJ558_16M,wpj558,WPJ558,ttyS0,115200,0x1000000,16M))
-
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,))
$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,WNR2200,"" NA,))
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
-$(eval $(call MultiProfile,WPJ558,WPJ558_8M WPJ558_16M))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
$(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543))
#include "common.h"
-@@ -69,6 +70,40 @@ static const char * __init ath79_prom_fi
+@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
return ret;
}
+ case DEVID_COMPEX_WPE72:
+ ath79_prom_append_cmdline("board", "WPE72");
+ break;
-+ case DEVID_COMPEX_WPJ558:
-+ ath79_prom_append_cmdline("board", "WPJ558");
-+ break;
+ default:
+ pr_warn("prom: unknown device id: %x\n", mylo->did);
+ return 0;
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,147 @@
+@@ -16,22 +16,146 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
-+ ATH79_MACH_WPJ558, /* Compex WPJ558 */
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +66,754 @@ config ATH79_MACH_AP121
+@@ -11,62 +66,743 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+ select MYLOADER
+
-+config ATH79_MACH_WPJ558
-+ bool "Compex WPJ558 board support"
-+ select SOC_QCA955X
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
-+ select MYLOADER
-+
+config ATH79_MACH_DIR_505_A1
+ bool "D-Link DIR-505-A1 support"
+ select SOC_AR933X
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +830,65 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +819,65 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
endmenu
config SOC_AR71XX
-@@ -132,7 +938,10 @@ config ATH79_DEV_DSA
+@@ -132,7 +927,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,4 +973,7 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,4 +962,7 @@ config ATH79_PCI_ATH9K_FIXUP
config ATH79_ROUTERBOOT
def_bool n
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +49,92 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
-+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
/* Devices based on the Atheros AR71xx */
#define DEVID_COMPEX_WP543 0x0640
#define DEVID_COMPEX_WPE72 0x0672
-#define DEVID_COMPEX_WPJ558 0x0688
/* Devices based on the IXP422 */
#define DEVID_COMPEX_WP18 0x047E
CPX_BOARD_AR71XX(DEVID_COMPEX_WPE72, 8,
"WPE72", "Compex WPE72",
"BareBoard"),
- CPX_BOARD_AR71XX(DEVID_COMPEX_WPJ558, 8,
- "WPJ558", "Compex WPJ558",
- "BareBoard"),
CPX_BOARD_AR23XX(DEVID_COMPEX_NP25G, 4,
"NP25G", "Compex NetPassage 25G",
#define DEVID_COMPEX_WP543 0x0640
#define DEVID_COMPEX_WPE72 0x0672
-#define DEVID_COMPEX_WPJ558 0x0688
-
/* Devices based on the IXP422 */
#define DEVID_COMPEX_WP18 0x047E
#define DEVID_COMPEX_NP18A 0x0489
projects / openwrt / staging / kaloz.git / commitdiff