* Some of the code has been inspired/copied from the 2.4 code written
* by Dale Farnsworth <dfarnsworth@mvista.com>.
*
- * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2006 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Copyright (C) 2004-2006 Sylvain Munaut <tnt@246tNt.com>
* Copyright (C) 2003 MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* will be mapped to.
*/
-#include <linux/platform_device.h>
+/* OF Platform device Usage :
+ *
+ * This driver is only used for PSCs configured in uart mode. The device
+ * tree will have a node for each PSC in uart mode w/ device_type = "serial"
+ * and "mpc52xx-psc-uart" in the compatible string
+ *
+ * By default, PSC devices are enumerated in the order they are found. However
+ * a particular PSC number can be forces by adding 'device_no = <port#>'
+ * to the device node.
+ *
+ * The driver init all necessary registers to place the PSC in uart mode without
+ * DCD. However, the pin multiplexing aren't changed and should be set either
+ * by the bootloader or in the platform init code.
+ */
+
+#undef DEBUG
+
+#include <linux/device.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <asm/delay.h>
#include <asm/io.h>
+#if defined(CONFIG_PPC_MERGE)
+#include <asm/of_platform.h>
+#else
+#include <linux/platform_device.h>
+#endif
+
#include <asm/mpc52xx.h>
#include <asm/mpc52xx_psc.h>
* it's cleared, then a memset(...,0,...) should be added to
* the console_init
*/
+#if defined(CONFIG_PPC_MERGE)
+/* lookup table for matching device nodes to index numbers */
+static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
+
+static void mpc52xx_uart_of_enumerate(void);
+#endif
#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
#define uart_console(port) (0)
#endif
+#if defined(CONFIG_PPC_MERGE)
+static struct of_device_id mpc52xx_uart_of_match[] = {
+ { .type = "serial", .compatible = "mpc52xx-psc-uart", },
+ { .type = "serial", .compatible = "mpc5200-psc", }, /* Efika only! */
+ {},
+};
+#endif
+
/* ======================================================================== */
/* UART operations */
port->membase = NULL;
}
- release_mem_region(port->mapbase, MPC52xx_PSC_SIZE);
+ release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc));
}
static int
int err;
if (port->flags & UPF_IOREMAP) /* Need to remap ? */
- port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+ port->membase = ioremap(port->mapbase,
+ sizeof(struct mpc52xx_psc));
if (!port->membase)
return -EINVAL;
- err = request_mem_region(port->mapbase, MPC52xx_PSC_SIZE,
+ err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc),
"mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
if (err && (port->flags & UPF_IOREMAP)) {
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned char mr1;
+ pr_debug("mpc52xx_console_get_options(port=%p)\n", port);
+
/* Read the mode registers */
out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
mr1 = in_8(&psc->mode);
/* CT{U,L}R are write-only ! */
- *baud = __res.bi_baudrate ?
- __res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+ *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+#if !defined(CONFIG_PPC_MERGE)
+ if (__res.bi_baudrate)
+ *baud = __res.bi_baudrate;
+#endif
/* Parse them */
switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
}
+#if !defined(CONFIG_PPC_MERGE)
static int __init
mpc52xx_console_setup(struct console *co, char *options)
{
return uart_set_options(port, co, baud, parity, bits, flow);
}
+#else
+
+static int __init
+mpc52xx_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &mpc52xx_uart_ports[co->index];
+ struct device_node *np = mpc52xx_uart_nodes[co->index];
+ unsigned int ipb_freq;
+ struct resource res;
+ int ret;
+
+ int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
+ co, co->index, options);
+
+ if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ pr_debug("PSC%x out of range\n", co->index);
+ return -EINVAL;
+ }
+
+ if (!np) {
+ pr_debug("PSC%x not found in device tree\n", co->index);
+ return -EINVAL;
+ }
+
+ pr_debug("Console on ttyPSC%x is %s\n",
+ co->index, mpc52xx_uart_nodes[co->index]->full_name);
+
+ /* Fetch register locations */
+ if ((ret = of_address_to_resource(np, 0, &res)) != 0) {
+ pr_debug("Could not get resources for PSC%x\n", co->index);
+ return ret;
+ }
+
+ /* Search for bus-frequency property in this node or a parent */
+ if ((ipb_freq = mpc52xx_find_ipb_freq(np)) == 0) {
+ pr_debug("Could not find IPB bus frequency!\n");
+ return -EINVAL;
+ }
+
+ /* Basic port init. Needed since we use some uart_??? func before
+ * real init for early access */
+ spin_lock_init(&port->lock);
+ port->uartclk = ipb_freq / 2;
+ port->ops = &mpc52xx_uart_ops;
+ port->mapbase = res.start;
+ port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc));
+ port->irq = irq_of_parse_and_map(np, 0);
+
+ if (port->membase == NULL)
+ return -EINVAL;
+
+ pr_debug("mpc52xx-psc uart at %lx, mapped to %p, irq=%x, freq=%i\n",
+ port->mapbase, port->membase, port->irq, port->uartclk);
+
+ /* Setup the port parameters accoding to options */
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
+
+ pr_debug("Setting console parameters: %i %i%c1 flow=%c\n",
+ baud, bits, parity, flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif /* defined(CONFIG_PPC_MERGE) */
+
static struct uart_driver mpc52xx_uart_driver;
static int __init
mpc52xx_console_init(void)
{
+ mpc52xx_uart_of_enumerate();
register_console(&mpc52xx_console);
return 0;
}
};
+#if !defined(CONFIG_PPC_MERGE)
/* ======================================================================== */
/* Platform Driver */
/* ======================================================================== */
/* Init the port structure */
port = &mpc52xx_uart_ports[idx];
- memset(port, 0x00, sizeof(struct uart_port));
-
spin_lock_init(&port->lock);
port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
port->fifosize = 512;
( uart_console(port) ? 0 : UPF_IOREMAP );
port->line = idx;
port->ops = &mpc52xx_uart_ops;
+ port->dev = &dev->dev;
/* Search for IRQ and mapbase */
for (i=0 ; i<dev->num_resources ; i++, res++) {
}
#endif
+
static struct platform_driver mpc52xx_uart_platform_driver = {
.probe = mpc52xx_uart_probe,
.remove = mpc52xx_uart_remove,
.name = "mpc52xx-psc",
},
};
+#endif /* !defined(CONFIG_PPC_MERGE) */
+
+
+#if defined(CONFIG_PPC_MERGE)
+/* ======================================================================== */
+/* OF Platform Driver */
+/* ======================================================================== */
+
+static int __devinit
+mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+ int idx = -1;
+ unsigned int ipb_freq;
+ struct uart_port *port = NULL;
+ struct resource res;
+ int ret;
+
+ dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match);
+
+ /* Check validity & presence */
+ for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
+ if (mpc52xx_uart_nodes[idx] == op->node)
+ break;
+ if (idx >= MPC52xx_PSC_MAXNUM)
+ return -EINVAL;
+ pr_debug("Found %s assigned to ttyPSC%x\n",
+ mpc52xx_uart_nodes[idx]->full_name, idx);
+
+ /* Search for bus-frequency property in this node or a parent */
+ if ((ipb_freq = mpc52xx_find_ipb_freq(op->node)) == 0) {
+ dev_dbg(&op->dev, "Could not find IPB bus frequency!\n");
+ return -EINVAL;
+ }
+
+ /* Init the port structure */
+ port = &mpc52xx_uart_ports[idx];
+
+ spin_lock_init(&port->lock);
+ port->uartclk = ipb_freq / 2;
+ port->fifosize = 512;
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF |
+ ( uart_console(port) ? 0 : UPF_IOREMAP );
+ port->line = idx;
+ port->ops = &mpc52xx_uart_ops;
+ port->dev = &op->dev;
+
+ /* Search for IRQ and mapbase */
+ if ((ret = of_address_to_resource(op->node, 0, &res)) != 0)
+ return ret;
+
+ port->mapbase = res.start;
+ port->irq = irq_of_parse_and_map(op->node, 0);
+
+ dev_dbg(&op->dev, "mpc52xx-psc uart at %lx, irq=%x, freq=%i\n",
+ port->mapbase, port->irq, port->uartclk);
+
+ if ((port->irq==NO_IRQ) || !port->mapbase) {
+ printk(KERN_ERR "Could not allocate resources for PSC\n");
+ return -EINVAL;
+ }
+
+ /* Add the port to the uart sub-system */
+ ret = uart_add_one_port(&mpc52xx_uart_driver, port);
+ if (!ret)
+ dev_set_drvdata(&op->dev, (void*)port);
+
+ return ret;
+}
+
+static int
+mpc52xx_uart_of_remove(struct of_device *op)
+{
+ struct uart_port *port = dev_get_drvdata(&op->dev);
+ dev_set_drvdata(&op->dev, NULL);
+
+ if (port)
+ uart_remove_one_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+mpc52xx_uart_of_suspend(struct of_device *op, pm_message_t state)
+{
+ struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
+
+ if (port)
+ uart_suspend_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+
+static int
+mpc52xx_uart_of_resume(struct of_device *op)
+{
+ struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev);
+
+ if (port)
+ uart_resume_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+#endif
+
+static void
+mpc52xx_uart_of_assign(struct device_node *np, int idx)
+{
+ int free_idx = -1;
+ int i;
+
+ /* Find the first free node */
+ for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
+ if (mpc52xx_uart_nodes[i] == NULL) {
+ free_idx = i;
+ break;
+ }
+ }
+
+ if ((idx < 0) || (idx >= MPC52xx_PSC_MAXNUM))
+ idx = free_idx;
+
+ if (idx < 0)
+ return; /* No free slot; abort */
+
+ /* If the slot is already occupied, then swap slots */
+ if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
+ mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
+ mpc52xx_uart_nodes[i] = np;
+}
+
+static void
+mpc52xx_uart_of_enumerate(void)
+{
+ static int enum_done = 0;
+ struct device_node *np;
+ const unsigned int *devno;
+ int i;
+
+ if (enum_done)
+ return;
+
+ for_each_node_by_type(np, "serial") {
+ if (!of_match_node(mpc52xx_uart_of_match, np))
+ continue;
+
+ /* Is a particular device number requested? */
+ devno = get_property(np, "device_no", NULL);
+ mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1);
+ }
+
+ enum_done = 1;
+
+ for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) {
+ if (mpc52xx_uart_nodes[i])
+ pr_debug("%s assigned to ttyPSC%x\n",
+ mpc52xx_uart_nodes[i]->full_name, i);
+ }
+}
+
+MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match);
+
+static struct of_platform_driver mpc52xx_uart_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "mpc52xx-psc-uart",
+ .match_table = mpc52xx_uart_of_match,
+ .probe = mpc52xx_uart_of_probe,
+ .remove = mpc52xx_uart_of_remove,
+#ifdef CONFIG_PM
+ .suspend = mpc52xx_uart_of_suspend,
+ .resume = mpc52xx_uart_of_resume,
+#endif
+ .driver = {
+ .name = "mpc52xx-psc-uart",
+ },
+};
+#endif /* defined(CONFIG_PPC_MERGE) */
/* ======================================================================== */
{
int ret;
- printk(KERN_INFO "Serial: MPC52xx PSC driver\n");
+ printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
- ret = uart_register_driver(&mpc52xx_uart_driver);
- if (ret == 0) {
- ret = platform_driver_register(&mpc52xx_uart_platform_driver);
- if (ret)
- uart_unregister_driver(&mpc52xx_uart_driver);
+ if ((ret = uart_register_driver(&mpc52xx_uart_driver)) != 0) {
+ printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
+ __FILE__, ret);
+ return ret;
}
- return ret;
+#if defined(CONFIG_PPC_MERGE)
+ mpc52xx_uart_of_enumerate();
+
+ ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
+ if (ret) {
+ printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n",
+ __FILE__, ret);
+ uart_unregister_driver(&mpc52xx_uart_driver);
+ return ret;
+ }
+#else
+ ret = platform_driver_register(&mpc52xx_uart_platform_driver);
+ if (ret) {
+ printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
+ __FILE__, ret);
+ uart_unregister_driver(&mpc52xx_uart_driver);
+ return ret;
+ }
+#endif
+
+ return 0;
}
static void __exit
mpc52xx_uart_exit(void)
{
+#if defined(CONFIG_PPC_MERGE)
+ of_unregister_platform_driver(&mpc52xx_uart_of_driver);
+#else
platform_driver_unregister(&mpc52xx_uart_platform_driver);
+#endif
uart_unregister_driver(&mpc52xx_uart_driver);
}
projects / openwrt / staging / blogic.git / commitdiff