--- /dev/null
+# CONFIG_4KSTACKS is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_64BIT is not set
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ACPI is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AGP is not set
+# CONFIG_AIRO is not set
+CONFIG_AIRO_CS=m
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APM is not set
+# CONFIG_APPLICOM is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+# CONFIG_ARCNET is not set
+CONFIG_ARPD=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATM is not set
+CONFIG_ATMEL=m
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_ATM_CLIP=m
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_LANAI is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+# CONFIG_ATM_NICSTAR is not set
+CONFIG_ATM_TCP=m
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUDIT_ARCH is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B44 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PROGEAR is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX=m
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BITREVERSE=y
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_BOUNCE=y
+# CONFIG_BPQETHER is not set
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_VLAN=m
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BT is not set
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIBLUECARD is not set
+CONFIG_BT_HCIBPA10X=m
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_SCO=m
+CONFIG_BUG=y
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_CFG80211=m
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CODA_FS is not set
+CONFIG_COMPAT_VDSO=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_CONNECTOR is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_ALGAPI=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_HASH=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DECNET is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DELL_RBU is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+CONFIG_DEVPORT=y
+# CONFIG_DGRS is not set
+# CONFIG_DISABLE_SUSPEND_VT_SWITCH is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DNOTIFY=y
+CONFIG_DOUBLEFAULT=y
+CONFIG_DRM=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EDD is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+CONFIG_ELF_CORE=y
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_EUROTECH_WDT is not set
+CONFIG_EVENTFD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_EXPORTFS=m
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_FS=m
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FB=y
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_EFI is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_GX=y
+CONFIG_FB_GEODE_GX1=y
+CONFIG_FB_GEODE_LX=y
+# CONFIG_FB_HECUBA is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+CONFIG_FB_OLPC_DCON=y
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VESA is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FLATMEM=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FORCED_INLINING=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+# CONFIG_GENERIC_CPU is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GEODE_MFGPT_TIMER=y
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_HAPPYMEAL is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HIBERNATION=y
+CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_FF is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_CS is not set
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HP100 is not set
+# CONFIG_HPET_TIMER is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_HT_IRQ=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_GEODE=y
+# CONFIG_HW_RANDOM_INTEL is not set
+CONFIG_HW_RANDOM_VIA=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+CONFIG_I2C=y
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I82092 is not set
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_IDE is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_IFB=m
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IMQ=m
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+CONFIG_IMQ_BEHAVIOR_BA=y
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+CONFIG_IMQ_NUM_DEVS=2
+CONFIG_INET=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+CONFIG_INET_DIAG=m
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_IMQ=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_ROUTE=m
+# CONFIG_IPC_NS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200 is not set
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPX is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_ARPFILTER=m
+# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+CONFIG_IP_NF_MATCH_IPRANGE=m
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_SET=m
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_SIP=m
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_TFTP=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_PPTP=m
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SET is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_IPPORTHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+CONFIG_IP_NF_SET_IPTREEMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SIP=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_ROUTE=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_SET=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_TFTP=m
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+CONFIG_IP_ROUTE_MULTIPATH_DRR=m
+CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
+CONFIG_IP_ROUTE_MULTIPATH_RR=m
+CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IRDA is not set
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISDN is not set
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IT8712F_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_IXGB is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_JOLIET=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_KEXEC=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYS is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+CONFIG_KTIME_SCALAR=y
+# CONFIG_KVM is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LBD is not set
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LGUEST is not set
+CONFIG_LIBCRC32C=m
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOCKD=m
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LSF is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_MAC_PARTITION=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MD is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MGEODEGX1 is not set
+CONFIG_MGEODE_LX=y
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
+CONFIG_MII=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINI_FO=y
+CONFIG_MISC_DEVICES=y
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MKISS=m
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_RICOH_MMC is not set
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMU=y
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPSC is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_BLOCK2MTD=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_CAFE=y
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_OOPS=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_PCI=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_MTRR is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+CONFIG_NET=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_LAYER7=m
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETPOLL is not set
+# CONFIG_NETROM is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NET_9P is not set
+CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_MIRRED=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NET_SB1000 is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RED is not set
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFTL is not set
+CONFIG_NF_CONNTRACK=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CT_PROTO_GRE=m
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_NAT=y
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_FTP=m
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+CONFIG_NF_NAT_PROTO_GRE=m
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NL80211=y
+# CONFIG_NLS is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_1250=m
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+CONFIG_NLS_KOI8_R=m
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+CONFIG_NOHIGHMEM=y
+CONFIG_NORTEL_HERMES=m
+CONFIG_NO_HZ=y
+CONFIG_NR_QUICK=1
+# CONFIG_NS83820 is not set
+CONFIG_NSC_GPIO=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+CONFIG_NVRAM=y
+# CONFIG_OCFS2_FS is not set
+CONFIG_OLPC=y
+CONFIG_OLPC_PM=y
+CONFIG_OPEN_FIRMWARE=y
+# CONFIG_OSF_PARTITION is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+CONFIG_PATA_PLATFORM=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+CONFIG_PC8736x_GPIO=m
+# CONFIG_PC87413_WDT is not set
+# CONFIG_PCCARD is not set
+CONFIG_PCI=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_GOANY is not set
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCI_GOOLPC=y
+CONFIG_PCI_HERMES=m
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_OLPC=y
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHYLIB is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_PID_NS is not set
+CONFIG_PLIST=y
+CONFIG_PLX_HERMES=m
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_TRACE is not set
+# CONFIG_PM_VERBOSE is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PPP=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_PRINTK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_PRISM54 is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROMFS_FS is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_QUICKLIST=y
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_RELAY=y
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_RTC=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTL8187 is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_PAS16 is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIO=y
+# CONFIG_SERIO_CT82C710 is not set
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLAB=y
+CONFIG_SLABINFO=y
+CONFIG_SLHC=m
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC37B787_WDT is not set
+CONFIG_SND=m
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+CONFIG_SND_HWDEP=m
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+CONFIG_SND_MIXER_OSS=m
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_PCM=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_TIMER=m
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_SSB is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSFDC is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_STANDALONE=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUN_PARTITION is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSFS=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSPROF is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_YEAH=m
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+CONFIG_TMD_HERMES=m
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TOSHIBA is not set
+# CONFIG_TR is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TUN is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TYPHOON is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+CONFIG_UID16=y
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_UNIX=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_USB=y
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+CONFIG_USB_ATM=m
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_CATC=m
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_DATAFAB=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_USBAT=y
+# CONFIG_USB_STV680 is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_USBNET_MII=m
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+CONFIG_USB_YEALINK=m
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USER_NS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_VGASTATE is not set
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+CONFIG_VIDEO_SELECT=y
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_VM86=y
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_VORTEX is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1 is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WDTPCI is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+# CONFIG_X86_64 is not set
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_CMPXCHG=y
+# CONFIG_X86_CPUID is not set
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_ES7000 is not set
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_GENERIC=y
+# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_LOCAL_APIC=y
+# CONFIG_X86_MCE is not set
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
+CONFIG_X86_MPPARSE=y
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_PAE is not set
+CONFIG_X86_PC=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_X86_SUMMIT is not set
+CONFIG_X86_TSC=y
+CONFIG_X86_UP_APIC=y
+CONFIG_X86_UP_IOAPIC=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_VSMP is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_USER=m
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_YENTA=m
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ZONE_DMA32 is not set
+CONFIG_ZONE_DMA_FLAG=1
--- /dev/null
+/*
+ * setup.S Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * setup.s is responsible for getting the system data from the BIOS,
+ * and putting them into the appropriate places in system memory.
+ * both setup.s and system has been loaded by the bootblock.
+ *
+ * This code asks the bios for memory/disk/other parameters, and
+ * puts them in a "safe" place: 0x90000-0x901FF, ie where the
+ * boot-block used to be. It is then up to the protected mode
+ * system to read them from there before the area is overwritten
+ * for buffer-blocks.
+ *
+ * Move PS/2 aux init code to psaux.c
+ * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
+ *
+ * some changes and additional features by Christoph Niemann,
+ * March 1993/June 1994 (Christoph.Niemann@linux.org)
+ *
+ * add APM BIOS checking by Stephen Rothwell, May 1994
+ * (sfr@canb.auug.org.au)
+ *
+ * High load stuff, initrd support and position independency
+ * by Hans Lermen & Werner Almesberger, February 1996
+ * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
+ *
+ * Video handling moved to video.S by Martin Mares, March 1996
+ * <mj@k332.feld.cvut.cz>
+ *
+ * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
+ * parsons) to avoid loadlin confusion, July 1997
+ *
+ * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
+ * <stiker@northlink.com>
+ *
+ * Fix to work around buggy BIOSes which don't use carry bit correctly
+ * and/or report extended memory in CX/DX for e801h memory size detection
+ * call. As a result the kernel got wrong figures. The int15/e801h docs
+ * from Ralf Brown interrupt list seem to indicate AX/BX should be used
+ * anyway. So to avoid breaking many machines (presumably there was a reason
+ * to orginally use CX/DX instead of AX/BX), we do a kludge to see
+ * if CX/DX have been changed in the e801 call and if so use AX/BX .
+ * Michael Miller, April 2001 <michaelm@mjmm.org>
+ *
+ * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
+ * by Robert Schwebel, December 2001 <robert@schwebel.de>
+ */
+
+#include <asm/segment.h>
+#include <linux/utsrelease.h>
+#include <linux/compile.h>
+#include <asm/boot.h>
+#include <asm/e820.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+/* Signature words to ensure LILO loaded us right */
+#define SIG1 0xAA55
+#define SIG2 0x5A5A
+
+INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
+SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
+SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
+ # ... and the former contents of CS
+
+DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
+
+.code16
+.globl begtext, begdata, begbss, endtext, enddata, endbss
+
+.text
+begtext:
+.data
+begdata:
+.bss
+begbss:
+.text
+
+start:
+ jmp trampoline
+
+# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
+
+ .ascii "HdrS" # header signature
+ .word 0x0206 # header version number (>= 0x0105)
+ # or else old loadlin-1.5 will fail)
+realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
+start_sys_seg: .word SYSSEG
+ .word kernel_version # pointing to kernel version string
+ # above section of header is compatible
+ # with loadlin-1.5 (header v1.5). Don't
+ # change it.
+
+type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
+ # Bootlin, SYSLX, bootsect...)
+ # See Documentation/i386/boot.txt for
+ # assigned ids
+
+# flags, unused bits must be zero (RFU) bit within loadflags
+loadflags:
+LOADED_HIGH = 1 # If set, the kernel is loaded high
+CAN_USE_HEAP = 0x80 # If set, the loader also has set
+ # heap_end_ptr to tell how much
+ # space behind setup.S can be used for
+ # heap purposes.
+ # Only the loader knows what is free
+#ifndef __BIG_KERNEL__
+ .byte 0
+#else
+ .byte LOADED_HIGH
+#endif
+
+setup_move_size: .word 0x8000 # size to move, when setup is not
+ # loaded at 0x90000. We will move setup
+ # to 0x90000 then just before jumping
+ # into the kernel. However, only the
+ # loader knows how much data behind
+ # us also needs to be loaded.
+
+code32_start: # here loaders can put a different
+ # start address for 32-bit code.
+#ifndef __BIG_KERNEL__
+ .long 0x1000 # 0x1000 = default for zImage
+#else
+ .long 0x100000 # 0x100000 = default for big kernel
+#endif
+
+ramdisk_image: .long 0 # address of loaded ramdisk image
+ # Here the loader puts the 32-bit
+ # address where it loaded the image.
+ # This only will be read by the kernel.
+
+ramdisk_size: .long 0 # its size in bytes
+
+bootsect_kludge:
+ .long 0 # obsolete
+
+heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
+ # space from here (exclusive) down to
+ # end of setup code can be used by setup
+ # for local heap purposes.
+
+pad1: .word 0
+cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
+ # If nonzero, a 32-bit pointer
+ # to the kernel command line.
+ # The command line should be
+ # located between the start of
+ # setup and the end of low
+ # memory (0xa0000), or it may
+ # get overwritten before it
+ # gets read. If this field is
+ # used, there is no longer
+ # anything magical about the
+ # 0x90000 segment; the setup
+ # can be located anywhere in
+ # low memory 0x10000 or higher.
+
+ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+ # (Header version 0x0203 or later)
+ # The highest safe address for
+ # the contents of an initrd
+
+kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
+ #required for protected mode
+ #kernel
+#ifdef CONFIG_RELOCATABLE
+relocatable_kernel: .byte 1
+#else
+relocatable_kernel: .byte 0
+#endif
+pad2: .byte 0
+pad3: .word 0
+
+cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
+ #added with boot protocol
+ #version 2.06
+
+trampoline: call start_of_setup
+ .align 16
+ # The offset at this point is 0x240
+ .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
+# End of setup header #####################################################
+
+start_of_setup:
+# Bootlin depends on this being done early
+ movw $0x01500, %ax
+ movb $0x81, %dl
+ int $0x13
+
+#ifdef SAFE_RESET_DISK_CONTROLLER
+# Reset the disk controller.
+ movw $0x0000, %ax
+ movb $0x80, %dl
+ int $0x13
+#endif
+
+# Set %ds = %cs, we know that SETUPSEG = %cs at this point
+ movw %cs, %ax # aka SETUPSEG
+ movw %ax, %ds
+# Check signature at end of setup
+ cmpw $SIG1, setup_sig1
+ jne bad_sig
+
+ cmpw $SIG2, setup_sig2
+ jne bad_sig
+
+ jmp good_sig1
+
+# Routine to print asciiz string at ds:si
+prtstr:
+ lodsb
+ andb %al, %al
+ jz fin
+
+ call prtchr
+ jmp prtstr
+
+fin: ret
+
+# Space printing
+prtsp2: call prtspc # Print double space
+prtspc: movb $0x20, %al # Print single space (note: fall-thru)
+
+# Part of above routine, this one just prints ascii al
+prtchr: pushw %ax
+ pushw %cx
+ movw $7,%bx
+ movw $0x01, %cx
+ movb $0x0e, %ah
+ int $0x10
+ popw %cx
+ popw %ax
+ ret
+
+beep: movb $0x07, %al
+ jmp prtchr
+
+no_sig_mess: .string "No setup signature found ..."
+
+good_sig1:
+ jmp good_sig
+
+# We now have to find the rest of the setup code/data
+bad_sig:
+ movw %cs, %ax # SETUPSEG
+ subw $DELTA_INITSEG, %ax # INITSEG
+ movw %ax, %ds
+ xorb %bh, %bh
+ movb (497), %bl # get setup sect from bootsect
+ subw $4, %bx # LILO loads 4 sectors of setup
+ shlw $8, %bx # convert to words (1sect=2^8 words)
+ movw %bx, %cx
+ shrw $3, %bx # convert to segment
+ addw $SYSSEG, %bx
+ movw %bx, %cs:start_sys_seg
+# Move rest of setup code/data to here
+ movw $2048, %di # four sectors loaded by LILO
+ subw %si, %si
+ pushw %cs
+ popw %es
+ movw $SYSSEG, %ax
+ movw %ax, %ds
+ rep
+ movsw
+ movw %cs, %ax # aka SETUPSEG
+ movw %ax, %ds
+ cmpw $SIG1, setup_sig1
+ jne no_sig
+
+ cmpw $SIG2, setup_sig2
+ jne no_sig
+
+ jmp good_sig
+
+no_sig:
+ lea no_sig_mess, %si
+ call prtstr
+
+no_sig_loop:
+ hlt
+ jmp no_sig_loop
+
+good_sig:
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %ds
+# Check if an old loader tries to load a big-kernel
+ testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
+ jz loader_ok # No, no danger for old loaders.
+
+ cmpb $0, %cs:type_of_loader # Do we have a loader that
+ # can deal with us?
+ jnz loader_ok # Yes, continue.
+
+ pushw %cs # No, we have an old loader,
+ popw %ds # die.
+ lea loader_panic_mess, %si
+ call prtstr
+
+ jmp no_sig_loop
+
+loader_panic_mess: .string "Wrong loader, giving up..."
+
+# check minimum cpuid
+# we do this here because it is the last place we can actually
+# show a user visible error message. Later the video modus
+# might be already messed up.
+loader_ok:
+ call verify_cpu
+ testl %eax,%eax
+ jz cpu_ok
+ movw %cs,%ax # aka SETUPSEG
+ movw %ax,%ds
+ lea cpu_panic_mess,%si
+ call prtstr
+1: jmp 1b
+
+cpu_panic_mess:
+ .asciz "PANIC: CPU too old for this kernel."
+
+#include "../kernel/verify_cpu.S"
+
+cpu_ok:
+# Get memory size (extended mem, kB)
+
+ xorl %eax, %eax
+ movl %eax, (0x1e0)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+ movb %al, (E820NR)
+# Try three different memory detection schemes. First, try
+# e820h, which lets us assemble a memory map, then try e801h,
+# which returns a 32-bit memory size, and finally 88h, which
+# returns 0-64m
+
+# method E820H:
+# the memory map from hell. e820h returns memory classified into
+# a whole bunch of different types, and allows memory holes and
+# everything. We scan through this memory map and build a list
+# of the first 32 memory areas, which we return at [E820MAP].
+# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
+
+#define SMAP 0x534d4150
+
+meme820:
+ xorl %ebx, %ebx # continuation counter
+ movw $E820MAP, %di # point into the whitelist
+ # so we can have the bios
+ # directly write into it.
+
+jmpe820:
+ movl $0x0000e820, %eax # e820, upper word zeroed
+ movl $SMAP, %edx # ascii 'SMAP'
+ movl $20, %ecx # size of the e820rec
+ pushw %ds # data record.
+ popw %es
+ int $0x15 # make the call
+ jc bail820 # fall to e801 if it fails
+
+ cmpl $SMAP, %eax # check the return is `SMAP'
+ jne bail820 # fall to e801 if it fails
+
+# cmpl $1, 16(%di) # is this usable memory?
+# jne again820
+
+ # If this is usable memory, we save it by simply advancing %di by
+ # sizeof(e820rec).
+ #
+good820:
+ movb (E820NR), %al # up to 128 entries
+ cmpb $E820MAX, %al
+ jae bail820
+
+ incb (E820NR)
+ movw %di, %ax
+ addw $20, %ax
+ movw %ax, %di
+again820:
+ cmpl $0, %ebx # check to see if
+ jne jmpe820 # %ebx is set to EOF
+bail820:
+
+
+# method E801H:
+# memory size is in 1k chunksizes, to avoid confusing loadlin.
+# we store the 0xe801 memory size in a completely different place,
+# because it will most likely be longer than 16 bits.
+# (use 1e0 because that's what Larry Augustine uses in his
+# alternative new memory detection scheme, and it's sensible
+# to write everything into the same place.)
+
+meme801:
+ stc # fix to work around buggy
+ xorw %cx,%cx # BIOSes which don't clear/set
+ xorw %dx,%dx # carry on pass/error of
+ # e801h memory size call
+ # or merely pass cx,dx though
+ # without changing them.
+ movw $0xe801, %ax
+ int $0x15
+ jc mem88
+
+ cmpw $0x0, %cx # Kludge to handle BIOSes
+ jne e801usecxdx # which report their extended
+ cmpw $0x0, %dx # memory in AX/BX rather than
+ jne e801usecxdx # CX/DX. The spec I have read
+ movw %ax, %cx # seems to indicate AX/BX
+ movw %bx, %dx # are more reasonable anyway...
+
+e801usecxdx:
+ andl $0xffff, %edx # clear sign extend
+ shll $6, %edx # and go from 64k to 1k chunks
+ movl %edx, (0x1e0) # store extended memory size
+ andl $0xffff, %ecx # clear sign extend
+ addl %ecx, (0x1e0) # and add lower memory into
+ # total size.
+
+# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
+# 64mb, depending on the bios) in ax.
+mem88:
+
+#endif
+ movb $0x88, %ah
+ int $0x15
+ movw %ax, (2)
+
+# Set the keyboard repeat rate to the max
+ movw $0x0305, %ax
+ xorw %bx, %bx
+ int $0x16
+
+#ifndef CONFIG_VGA_NOPROBE
+
+# Check for video adapter and its parameters and allow the
+# user to browse video modes.
+ call video # NOTE: we need %ds pointing
+ # to bootsector
+#endif
+
+# Get hd0 data...
+ xorw %ax, %ax
+ movw %ax, %ds
+ ldsw (4 * 0x41), %si
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ pushw %ax
+ movw %ax, %es
+ movw $0x0080, %di
+ movw $0x10, %cx
+ pushw %cx
+ cld
+ rep
+ movsb
+# Get hd1 data...
+ xorw %ax, %ax
+ movw %ax, %ds
+ ldsw (4 * 0x46), %si
+ popw %cx
+ popw %es
+ movw $0x0090, %di
+ rep
+ movsb
+# Check that there IS a hd1 :-)
+ movw $0x01500, %ax
+ movb $0x81, %dl
+ int $0x13
+ jc no_disk1
+
+ cmpb $3, %ah
+ je is_disk1
+
+no_disk1:
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %es
+ movw $0x0090, %di
+ movw $0x10, %cx
+ xorw %ax, %ax
+ cld
+ rep
+ stosb
+is_disk1:
+# check for Micro Channel (MCA) bus
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %ds
+ xorw %ax, %ax
+ movw %ax, (0xa0) # set table length to 0
+ movb $0xc0, %ah
+ stc
+ int $0x15 # moves feature table to es:bx
+ jc no_mca
+
+ pushw %ds
+ movw %es, %ax
+ movw %ax, %ds
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %es
+ movw %bx, %si
+ movw $0xa0, %di
+ movw (%si), %cx
+ addw $2, %cx # table length is a short
+ cmpw $0x10, %cx
+ jc sysdesc_ok
+
+ movw $0x10, %cx # we keep only first 16 bytes
+sysdesc_ok:
+ rep
+ movsb
+ popw %ds
+no_mca:
+#ifdef CONFIG_X86_VOYAGER
+ movb $0xff, 0x40 # flag on config found
+ movb $0xc0, %al
+ mov $0xff, %ah
+ int $0x15 # put voyager config info at es:di
+ jc no_voyager
+ movw $0x40, %si # place voyager info in apm table
+ cld
+ movw $7, %cx
+voyager_rep:
+ movb %es:(%di), %al
+ movb %al,(%si)
+ incw %di
+ incw %si
+ decw %cx
+ jnz voyager_rep
+no_voyager:
+#endif
+# Check for PS/2 pointing device
+ movw %cs, %ax # aka SETUPSEG
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ax, %ds
+ movb $0, (0x1ff) # default is no pointing device
+ int $0x11 # int 0x11: equipment list
+ testb $0x04, %al # check if mouse installed
+ jz no_psmouse
+
+ movb $0xAA, (0x1ff) # device present
+no_psmouse:
+
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+ movl $0x0000E980, %eax # IST Support
+ movl $0x47534943, %edx # Request value
+ int $0x15
+
+ movl %eax, (96)
+ movl %ebx, (100)
+ movl %ecx, (104)
+ movl %edx, (108)
+#endif
+
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+# Then check for an APM BIOS...
+ # %ds points to the bootsector
+ movw $0, 0x40 # version = 0 means no APM BIOS
+ movw $0x05300, %ax # APM BIOS installation check
+ xorw %bx, %bx
+ int $0x15
+ jc done_apm_bios # Nope, no APM BIOS
+
+ cmpw $0x0504d, %bx # Check for "PM" signature
+ jne done_apm_bios # No signature, no APM BIOS
+
+ andw $0x02, %cx # Is 32 bit supported?
+ je done_apm_bios # No 32-bit, no (good) APM BIOS
+
+ movw $0x05304, %ax # Disconnect first just in case
+ xorw %bx, %bx
+ int $0x15 # ignore return code
+ movw $0x05303, %ax # 32 bit connect
+ xorl %ebx, %ebx
+ xorw %cx, %cx # paranoia :-)
+ xorw %dx, %dx # ...
+ xorl %esi, %esi # ...
+ xorw %di, %di # ...
+ int $0x15
+ jc no_32_apm_bios # Ack, error.
+
+ movw %ax, (66) # BIOS code segment
+ movl %ebx, (68) # BIOS entry point offset
+ movw %cx, (72) # BIOS 16 bit code segment
+ movw %dx, (74) # BIOS data segment
+ movl %esi, (78) # BIOS code segment lengths
+ movw %di, (82) # BIOS data segment length
+# Redo the installation check as the 32 bit connect
+# modifies the flags returned on some BIOSs
+ movw $0x05300, %ax # APM BIOS installation check
+ xorw %bx, %bx
+ xorw %cx, %cx # paranoia
+ int $0x15
+ jc apm_disconnect # error -> shouldn't happen
+
+ cmpw $0x0504d, %bx # check for "PM" signature
+ jne apm_disconnect # no sig -> shouldn't happen
+
+ movw %ax, (64) # record the APM BIOS version
+ movw %cx, (76) # and flags
+ jmp done_apm_bios
+
+apm_disconnect: # Tidy up
+ movw $0x05304, %ax # Disconnect
+ xorw %bx, %bx
+ int $0x15 # ignore return code
+
+ jmp done_apm_bios
+
+no_32_apm_bios:
+ andw $0xfffd, (76) # remove 32 bit support bit
+done_apm_bios:
+#endif
+
+#include "edd.S"
+
+# Now we want to move to protected mode ...
+ cmpw $0, %cs:realmode_swtch
+ jz rmodeswtch_normal
+
+ lcall *%cs:realmode_swtch
+
+ jmp rmodeswtch_end
+
+rmodeswtch_normal:
+ pushw %cs
+ call default_switch
+
+rmodeswtch_end:
+# Now we move the system to its rightful place ... but we check if we have a
+# big-kernel. In that case we *must* not move it ...
+ testb $LOADED_HIGH, %cs:loadflags
+ jz do_move0 # .. then we have a normal low
+ # loaded zImage
+ # .. or else we have a high
+ # loaded bzImage
+ jmp end_move # ... and we skip moving
+
+do_move0:
+ movw $0x100, %ax # start of destination segment
+ movw %cs, %bp # aka SETUPSEG
+ subw $DELTA_INITSEG, %bp # aka INITSEG
+ movw %cs:start_sys_seg, %bx # start of source segment
+ cld
+do_move:
+ movw %ax, %es # destination segment
+ incb %ah # instead of add ax,#0x100
+ movw %bx, %ds # source segment
+ addw $0x100, %bx
+ subw %di, %di
+ subw %si, %si
+ movw $0x800, %cx
+ rep
+ movsw
+ cmpw %bp, %bx # assume start_sys_seg > 0x200,
+ # so we will perhaps read one
+ # page more than needed, but
+ # never overwrite INITSEG
+ # because destination is a
+ # minimum one page below source
+ jb do_move
+
+end_move:
+# then we load the segment descriptors
+ movw %cs, %ax # aka SETUPSEG
+ movw %ax, %ds
+
+# Check whether we need to be downward compatible with version <=201
+ cmpl $0, cmd_line_ptr
+ jne end_move_self # loader uses version >=202 features
+ cmpb $0x20, type_of_loader
+ je end_move_self # bootsect loader, we know of it
+
+# Boot loader doesnt support boot protocol version 2.02.
+# If we have our code not at 0x90000, we need to move it there now.
+# We also then need to move the params behind it (commandline)
+# Because we would overwrite the code on the current IP, we move
+# it in two steps, jumping high after the first one.
+ movw %cs, %ax
+ cmpw $SETUPSEG, %ax
+ je end_move_self
+
+ cli # make sure we really have
+ # interrupts disabled !
+ # because after this the stack
+ # should not be used
+ subw $DELTA_INITSEG, %ax # aka INITSEG
+ movw %ss, %dx
+ cmpw %ax, %dx
+ jb move_self_1
+
+ addw $INITSEG, %dx
+ subw %ax, %dx # this will go into %ss after
+ # the move
+move_self_1:
+ movw %ax, %ds
+ movw $INITSEG, %ax # real INITSEG
+ movw %ax, %es
+ movw %cs:setup_move_size, %cx
+ std # we have to move up, so we use
+ # direction down because the
+ # areas may overlap
+ movw %cx, %di
+ decw %di
+ movw %di, %si
+ subw $move_self_here+0x200, %cx
+ rep
+ movsb
+ ljmp $SETUPSEG, $move_self_here
+
+move_self_here:
+ movw $move_self_here+0x200, %cx
+ rep
+ movsb
+ movw $SETUPSEG, %ax
+ movw %ax, %ds
+ movw %dx, %ss
+end_move_self: # now we are at the right place
+
+#
+# Enable A20. This is at the very best an annoying procedure.
+# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
+# AMD Elan bug fix by Robert Schwebel.
+#
+
+#if defined(CONFIG_X86_ELAN)
+ movb $0x02, %al # alternate A20 gate
+ outb %al, $0x92 # this works on SC410/SC520
+a20_elan_wait:
+ call a20_test
+ jz a20_elan_wait
+ jmp a20_done
+#endif
+
+
+A20_TEST_LOOPS = 32 # Iterations per wait
+A20_ENABLE_LOOPS = 255 # Total loops to try
+
+
+#ifndef CONFIG_X86_VOYAGER
+a20_try_loop:
+
+ # First, see if we are on a system with no A20 gate.
+a20_none:
+ call a20_test
+ jnz a20_done
+
+ # Next, try the BIOS (INT 0x15, AX=0x2401)
+a20_bios:
+ movw $0x2401, %ax
+ pushfl # Be paranoid about flags
+ int $0x15
+ popfl
+
+ call a20_test
+ jnz a20_done
+
+ # Try enabling A20 through the keyboard controller
+#endif /* CONFIG_X86_VOYAGER */
+a20_kbc:
+ call empty_8042
+
+#ifndef CONFIG_X86_VOYAGER
+ call a20_test # Just in case the BIOS worked
+ jnz a20_done # but had a delayed reaction.
+#endif
+
+ movb $0xD1, %al # command write
+ outb %al, $0x64
+ call empty_8042
+
+ movb $0xDF, %al # A20 on
+ outb %al, $0x60
+ call empty_8042
+
+#ifndef CONFIG_X86_VOYAGER
+ # Wait until a20 really *is* enabled; it can take a fair amount of
+ # time on certain systems; Toshiba Tecras are known to have this
+ # problem.
+a20_kbc_wait:
+ xorw %cx, %cx
+a20_kbc_wait_loop:
+ call a20_test
+ jnz a20_done
+ loop a20_kbc_wait_loop
+
+ # Final attempt: use "configuration port A"
+a20_fast:
+ inb $0x92, %al # Configuration Port A
+ orb $0x02, %al # "fast A20" version
+ andb $0xFE, %al # don't accidentally reset
+ outb %al, $0x92
+
+ # Wait for configuration port A to take effect
+a20_fast_wait:
+ xorw %cx, %cx
+a20_fast_wait_loop:
+ call a20_test
+ jnz a20_done
+ loop a20_fast_wait_loop
+
+ # A20 is still not responding. Try frobbing it again.
+ #
+ decb (a20_tries)
+ jnz a20_try_loop
+
+ movw $a20_err_msg, %si
+ call prtstr
+
+a20_die:
+ hlt
+ jmp a20_die
+
+a20_tries:
+ .byte A20_ENABLE_LOOPS
+
+a20_err_msg:
+ .ascii "linux: fatal error: A20 gate not responding!"
+ .byte 13, 10, 0
+
+ # If we get here, all is good
+a20_done:
+
+#endif /* CONFIG_X86_VOYAGER */
+# set up gdt and idt and 32bit start address
+ lidt idt_48 # load idt with 0,0
+ xorl %eax, %eax # Compute gdt_base
+ movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
+ shll $4, %eax
+ addl %eax, code32
+ addl $gdt, %eax
+ movl %eax, (gdt_48+2)
+ lgdt gdt_48 # load gdt with whatever is
+ # appropriate
+
+# make sure any possible coprocessor is properly reset..
+ xorw %ax, %ax
+ outb %al, $0xf0
+ call delay
+
+ outb %al, $0xf1
+ call delay
+
+# well, that went ok, I hope. Now we mask all interrupts - the rest
+# is done in init_IRQ().
+ movb $0xFF, %al # mask all interrupts for now
+ outb %al, $0xA1
+ call delay
+
+ movb $0xFB, %al # mask all irq's but irq2 which
+ outb %al, $0x21 # is cascaded
+
+# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
+# need no steenking BIOS anyway (except for the initial loading :-).
+# The BIOS-routine wants lots of unnecessary data, and it's less
+# "interesting" anyway. This is how REAL programmers do it.
+#
+# Well, now's the time to actually move into protected mode. To make
+# things as simple as possible, we do no register set-up or anything,
+# we let the gnu-compiled 32-bit programs do that. We just jump to
+# absolute address 0x1000 (or the loader supplied one),
+# in 32-bit protected mode.
+#
+# Note that the short jump isn't strictly needed, although there are
+# reasons why it might be a good idea. It won't hurt in any case.
+ movw $1, %ax # protected mode (PE) bit
+ lmsw %ax # This is it!
+ jmp flush_instr
+
+flush_instr:
+ xorw %bx, %bx # Flag to indicate a boot
+ xorl %esi, %esi # Pointer to real-mode code
+ movw %cs, %si
+ subw $DELTA_INITSEG, %si
+ shll $4, %esi # Convert to 32-bit pointer
+
+# jump to startup_32 in arch/i386/boot/compressed/head.S
+#
+# NOTE: For high loaded big kernels we need a
+# jmpi 0x100000,__BOOT_CS
+#
+# but we yet haven't reloaded the CS register, so the default size
+# of the target offset still is 16 bit.
+# However, using an operand prefix (0x66), the CPU will properly
+# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
+# Manual, Mixing 16-bit and 32-bit code, page 16-6)
+
+ .byte 0x66, 0xea # prefix + jmpi-opcode
+code32: .long startup_32 # will be set to %cs+startup_32
+ .word __BOOT_CS
+.code32
+startup_32:
+ movl $(__BOOT_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ movl %eax, %ss
+
+ xorl %eax, %eax
+1: incl %eax # check that A20 really IS enabled
+ movl %eax, 0x00000000 # loop forever if it isn't
+ cmpl %eax, 0x00100000
+ je 1b
+
+ # Jump to the 32bit entry point
+ jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
+.code16
+
+# Here's a bunch of information about your current kernel..
+kernel_version: .ascii UTS_RELEASE
+ .ascii " ("
+ .ascii LINUX_COMPILE_BY
+ .ascii "@"
+ .ascii LINUX_COMPILE_HOST
+ .ascii ") "
+ .ascii UTS_VERSION
+ .byte 0
+
+# This is the default real mode switch routine.
+# to be called just before protected mode transition
+default_switch:
+ cli # no interrupts allowed !
+ movb $0x80, %al # disable NMI for bootup
+ # sequence
+ outb %al, $0x70
+ lret
+
+
+#ifndef CONFIG_X86_VOYAGER
+# This routine tests whether or not A20 is enabled. If so, it
+# exits with zf = 0.
+#
+# The memory address used, 0x200, is the int $0x80 vector, which
+# should be safe.
+
+A20_TEST_ADDR = 4*0x80
+
+a20_test:
+ pushw %cx
+ pushw %ax
+ xorw %cx, %cx
+ movw %cx, %fs # Low memory
+ decw %cx
+ movw %cx, %gs # High memory area
+ movw $A20_TEST_LOOPS, %cx
+ movw %fs:(A20_TEST_ADDR), %ax
+ pushw %ax
+a20_test_wait:
+ incw %ax
+ movw %ax, %fs:(A20_TEST_ADDR)
+ call delay # Serialize and make delay constant
+ cmpw %gs:(A20_TEST_ADDR+0x10), %ax
+ loope a20_test_wait
+
+ popw %fs:(A20_TEST_ADDR)
+ popw %ax
+ popw %cx
+ ret
+
+#endif /* CONFIG_X86_VOYAGER */
+
+# This routine checks that the keyboard command queue is empty
+# (after emptying the output buffers)
+#
+# Some machines have delusions that the keyboard buffer is always full
+# with no keyboard attached...
+#
+# If there is no keyboard controller, we will usually get 0xff
+# to all the reads. With each IO taking a microsecond and
+# a timeout of 100,000 iterations, this can take about half a
+# second ("delay" == outb to port 0x80). That should be ok,
+# and should also be plenty of time for a real keyboard controller
+# to empty.
+#
+
+empty_8042:
+ pushl %ecx
+ movl $100000, %ecx
+
+empty_8042_loop:
+ decl %ecx
+ jz empty_8042_end_loop
+
+ call delay
+
+ inb $0x64, %al # 8042 status port
+ testb $1, %al # output buffer?
+ jz no_output
+
+ call delay
+ inb $0x60, %al # read it
+ jmp empty_8042_loop
+
+no_output:
+ testb $2, %al # is input buffer full?
+ jnz empty_8042_loop # yes - loop
+empty_8042_end_loop:
+ popl %ecx
+ ret
+
+# Read the cmos clock. Return the seconds in al
+gettime:
+ pushw %cx
+ movb $0x02, %ah
+ int $0x1a
+ movb %dh, %al # %dh contains the seconds
+ andb $0x0f, %al
+ movb %dh, %ah
+ movb $0x04, %cl
+ shrb %cl, %ah
+ aad
+ popw %cx
+ ret
+
+# Delay is needed after doing I/O
+delay:
+ outb %al,$0x80
+ ret
+
+# Descriptor tables
+#
+# NOTE: The intel manual says gdt should be sixteen bytes aligned for
+# efficiency reasons. However, there are machines which are known not
+# to boot with misaligned GDTs, so alter this at your peril! If you alter
+# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
+# empty GDT entries (one for NULL and one reserved).
+#
+# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
+# true for the Voyager Quad CPU card which will not boot without
+# This directive. 16 byte aligment is recommended by intel.
+#
+ .align 16
+gdt:
+ .fill GDT_ENTRY_BOOT_CS,8,0
+
+ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
+ .word 0 # base address = 0
+ .word 0x9A00 # code read/exec
+ .word 0x00CF # granularity = 4096, 386
+ # (+5th nibble of limit)
+
+ .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
+ .word 0 # base address = 0
+ .word 0x9200 # data read/write
+ .word 0x00CF # granularity = 4096, 386
+ # (+5th nibble of limit)
+gdt_end:
+ .align 4
+
+ .word 0 # alignment byte
+idt_48:
+ .word 0 # idt limit = 0
+ .word 0, 0 # idt base = 0L
+
+ .word 0 # alignment byte
+gdt_48:
+ .word gdt_end - gdt - 1 # gdt limit
+ .word 0, 0 # gdt base (filled in later)
+
+#ifndef CONFIG_VGA_NOPROBE
+# Include video setup & detection code
+
+#include "video.S"
+#endif
+
+# Setup signature -- must be last
+setup_sig1: .word SIG1
+setup_sig2: .word SIG2
+
+# After this point, there is some free space which is used by the video mode
+# handling code to store the temporary mode table (not used by the kernel).
+
+modelist:
+
+.text
+endtext:
+.data
+enddata:
+.bss
+endbss:
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc5
+# Wed Jun 20 08:26:53 2007
+#
+CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_SMP is not set
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+CONFIG_MGEODE_LX=y
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_XADD=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_USE_3DNOW=y
+CONFIG_X86_TSC=y
+CONFIG_X86_MINIMUM_CPU_MODEL=4
+# CONFIG_HPET_TIMER is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_MCE is not set
+# CONFIG_VM86 is not set
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+CONFIG_X86_REBOOTFIXUPS=y
+# CONFIG_MICROCODE is not set
+CONFIG_X86_MSR=y
+CONFIG_X86_CPUID=m
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_NR_QUICK=1
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MTRR is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_VGA_NOPROBE is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_KEXEC=y
+CONFIG_PHYSICAL_START=0x400000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+# CONFIG_COMPAT_VDSO is not set
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+CONFIG_PM_DEBUG=y
+CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
+# CONFIG_PM_TRACE is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_SOFTWARE_SUSPEND=y
+CONFIG_PM_STD_PARTITION=""
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+# CONFIG_ACPI is not set
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOANY is not set
+CONFIG_PCI_GOOLPC=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_OLPC=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ISA is not set
+# CONFIG_MCA is not set
+# CONFIG_SCx200 is not set
+CONFIG_GEODE_MFGPT_TIMER=y
+CONFIG_OLPC=y
+CONFIG_OLPC_PM=y
+CONFIG_OPEN_FIRMWARE=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_SECMARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+# CONFIG_NET_ACT_IPT is not set
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_CAFE=y
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=m
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_BLK_DEV_CMD640 is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_ONLYDISK=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+# CONFIG_PCNET32_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_PRISM54_USB is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_ACX_PCI is not set
+# CONFIG_ACX_USB is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_PS2_OLPC=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_ITCO_WDT is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_GEODE=y
+# CONFIG_HW_RANDOM_VIA is not set
+CONFIG_NVRAM=y
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
+CONFIG_CS5535_GPIO=m
+# CONFIG_RAW_DRIVER is not set
+CONFIG_HANGCHECK_TIMER=m
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+CONFIG_SCx200_ACB=y
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_OV7670=y
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+CONFIG_VIDEO_CAFE_CCIC=y
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZR364XX is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_PROGEAR is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_VGASTATE=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=m
+CONFIG_FB_VESA=y
+# CONFIG_FB_HECUBA is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
+CONFIG_FB_OLPC_DCON=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+CONFIG_VIDEO_SELECT=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FONT_SUN12x22=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+CONFIG_SND_MPU401=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=y
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=m
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AC97_POWER_SAVE=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+CONFIG_USB_PERSIST=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
+#
+# Sysprof
+#
+CONFIG_SYSPROF=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_PROMFS_FS=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_LIST=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+
+#
+# Page alloc debug is incompatible with Software Suspend on i386
+#
+CONFIG_DEBUG_RODATA=y
+CONFIG_4KSTACKS=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+# CONFIG_SECURITY_SELINUX_DISABLE is not set
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_CRYPTO_DEV_GEODE=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_KTIME_SCALAR=y
--- /dev/null
+/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
+ *
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* The MFPGT timers on the CS5536 provide us with suitable timers to use
+ * as clock event sources - not as good as a HPET or APIC, but certainly
+ * better then the PIT. This isn't a general purpose MFGPT driver, but
+ * a simplified one designed specifically to act as a clock event source.
+ * For full details about the MFGPT, please consult the CS5536 data sheet.
+*/
+
+/* We are using the 32Khz input clock - its the only one that has the
+ * ranges we find desirable. The following table lists the suitable
+ * divisors and the associated hz, minimum interval
+ * and the maximum interval:
+
+ Divisor Hz Min Delta (S) Max Delta (S)
+ 1 32000 .0005 2.048
+ 2 16000 .001 4.096
+ 4 8000 .002 8.192
+ 8 4000 .004 16.384
+ 16 2000 .008 32.768
+ 32 1000 .016 65.536
+ 64 500 .032 131.072
+ 128 250 .064 262.144
+ 256 125 .128 524.288
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <asm/geode.h>
+
+#include "do_timer.h"
+
+#define MFGPT_MAX_TIMERS 8
+
+#define F_AVAIL 0x01
+
+static struct mfgpt_timer_t {
+ int flags;
+ struct module *owner;
+} mfgpt_timers[MFGPT_MAX_TIMERS];
+
+/* Selected from the table above */
+
+#define MFGPT_DIVISOR 16
+#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
+#define MFGPT_HZ (32000 / MFGPT_DIVISOR)
+#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
+
+#ifdef CONFIG_GEODE_MFGPT_TIMER
+static int __init mfgpt_timer_setup(void);
+#else
+#define mfgpt_timer_setup() (0)
+#endif
+
+/* Allow for disabling of MFGPTs */
+static int disable = 0;
+static int __init mfgpt_disable(char *s)
+{
+ disable = 1;
+ return 1;
+}
+__setup("nomfgpt", mfgpt_disable);
+
+/*
+ * Check whether any MFGPTs are available for the kernel to use. In most
+ * cases, firmware that uses AMD's VSA code will claim all timers during
+ * bootup; we certainly don't want to take them if they're already in use.
+ * In other cases (such as with VSAless OpenFirmware), the system firmware
+ * leaves timers available for us to use.
+ */
+int __init geode_mfgpt_detect(void)
+{
+ int count = 0, i;
+ u16 val;
+
+ if (disable) {
+ printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n");
+ return 0;
+ }
+
+ for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
+ val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
+ if (!(val & MFGPT_SETUP_SETUP)) {
+ mfgpt_timers[i].flags = F_AVAIL;
+ count++;
+ }
+ }
+
+ /* set up clock event device, if desired */
+ i = mfgpt_timer_setup();
+
+ return count;
+}
+
+int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
+{
+ u32 msr, mask, value, dummy;
+ int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
+
+ if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
+ return -EIO;
+
+ /*
+ * The register maps for these are described in sections 6.17.1.x of
+ * the AMD Geode CS5536 Companion Device Data Book.
+ */
+ switch(event) {
+ case MFGPT_EVENT_RESET:
+ /* XXX: According to the docs, we cannot reset timers above
+ * 6; that is, resets for 7 and 8 will be ignored. Is this
+ * a problem? */
+ msr = MFGPT_NR_MSR;
+ mask = 1 << (timer + 24);
+ break;
+
+ case MFGPT_EVENT_NMI:
+ msr = MFGPT_NR_MSR;
+ mask = 1 << (timer + shift);
+ break;
+
+ case MFGPT_EVENT_IRQ:
+ msr = MFGPT_IRQ_MSR;
+ mask = 1 << (timer + shift);
+ break;
+
+ default:
+ return -EIO;
+ }
+
+ rdmsr(msr, value, dummy);
+
+ if (enable)
+ value |= mask;
+ else
+ value &= ~mask;
+
+ wrmsr(msr, value, dummy);
+ return 0;
+}
+EXPORT_SYMBOL(geode_mfgpt_toggle_event);
+
+int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+{
+ u32 val, dummy;
+ int offset;
+
+ if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
+ return -EIO;
+
+ if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+ return -EIO;
+
+ rdmsr(0x51400022, val, dummy);
+
+ offset = (timer % 4) * 4;
+
+ val &= ~((0xF << offset) | (0xF << (offset + 16)));
+
+ if (enable) {
+ val |= (irq & 0x0F) << (offset);
+ val |= (irq & 0x0F) << (offset + 16);
+ }
+
+ wrmsr(0x51400022, val, dummy);
+ return 0;
+}
+EXPORT_SYMBOL(geode_mfgpt_set_irq);
+
+static int mfgpt_get(int timer, struct module *owner)
+{
+ mfgpt_timers[timer].flags &= ~F_AVAIL;
+ mfgpt_timers[timer].owner = owner;
+ printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
+ return timer;
+}
+
+int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner)
+{
+ int i;
+
+ if (!geode_get_dev_base(GEODE_DEV_MFGPT))
+ return -ENODEV;
+ if (timer >= MFGPT_MAX_TIMERS)
+ return -EIO;
+
+ if (timer < 0) {
+ /* Try to find an available timer */
+ for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
+ if (mfgpt_timers[i].flags & F_AVAIL)
+ return mfgpt_get(i, owner);
+
+ if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
+ break;
+ }
+ }
+ else {
+ /* If they requested a specific timer, try to honor that */
+ if (mfgpt_timers[timer].flags & F_AVAIL)
+ return mfgpt_get(timer, owner);
+ }
+
+ /* No timers available - too bad */
+ return -1;
+}
+EXPORT_SYMBOL(geode_mfgpt_alloc_timer);
+
+#ifdef CONFIG_GEODE_MFGPT_TIMER
+
+static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
+static u16 mfgpt_event_clock;
+
+static int irq = 7;
+static int __init mfgpt_setup(char *str)
+{
+ get_option(&str, &irq);
+ return 1;
+}
+__setup("mfgpt_irq=", mfgpt_setup);
+
+static inline void mfgpt_disable_timer(u16 clock)
+{
+ u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP);
+ geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN);
+}
+
+static int mfgpt_next_event(unsigned long, struct clock_event_device *);
+static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
+
+static struct clock_event_device mfgpt_clockevent = {
+ .name = "mfgpt-timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = mfgpt_set_mode,
+ .set_next_event = mfgpt_next_event,
+ .rating = 250,
+ .cpumask = CPU_MASK_ALL,
+ .shift = 32
+};
+
+static inline void mfgpt_start_timer(u16 clock, u16 delta)
+{
+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
+
+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+}
+
+static void mfgpt_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ mfgpt_disable_timer(mfgpt_event_clock);
+
+ if (mode == CLOCK_EVT_MODE_PERIODIC)
+ mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC);
+
+ mfgpt_tick_mode = mode;
+}
+
+static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+ mfgpt_start_timer(mfgpt_event_clock, delta);
+ return 0;
+}
+
+/* Assume (foolishly?), that this interrupt was due to our tick */
+
+static irqreturn_t mfgpt_tick(int irq, void *dev_id)
+{
+ if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
+ return IRQ_HANDLED;
+
+ /* Turn off the clock */
+ mfgpt_disable_timer(mfgpt_event_clock);
+
+ /* Clear the counter */
+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
+
+ /* Restart the clock in periodic mode */
+
+ if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
+ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
+ }
+
+ mfgpt_clockevent.event_handler(&mfgpt_clockevent);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mfgptirq = {
+ .handler = mfgpt_tick,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+ .mask = CPU_MASK_NONE,
+ .name = "mfgpt-timer"
+};
+
+static int __init mfgpt_timer_setup(void)
+{
+ int timer, ret;
+ u16 val;
+
+ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE);
+ if (timer < 0) {
+ printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n");
+ return -ENODEV;
+ }
+
+ mfgpt_event_clock = timer;
+ /* Set the clock scale and enable the event mode for CMP2 */
+ val = MFGPT_SCALE | (3 << 8);
+
+ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
+
+ /* Set up the IRQ on the MFGPT side */
+ if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+ printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
+ return -EIO;
+ }
+
+ /* And register it with the kernel */
+ ret = setup_irq(irq, &mfgptirq);
+
+ if (ret) {
+ printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n");
+ goto err;
+ }
+
+ /* Set up the clock event */
+ mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
+ mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent);
+ mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent);
+
+ printk("mfgpt-timer: registering the MFGT timer as a clock event.\n");
+ clockevents_register_device(&mfgpt_clockevent);
+
+ return 0;
+
+err:
+ geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+ printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n");
+ return -EIO;
+}
+
+#endif
--- /dev/null
+/*
+ * ofw.c - Open Firmware client interface for 32-bit systems.
+ * This code is intended to be portable to any 32-bit Open Firmware
+ * implementation with a standard client interface that can be
+ * called when Linux is running.
+ *
+ * Copyright (C) 2007 Mitch Bradley <wmb@firmworks.com>
+ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
+ */
+
+#include <stdarg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/ofw.h>
+
+
+int (*call_firmware)(int *);
+
+static DEFINE_SPINLOCK(prom_lock);
+
+#define MAXARGS 20
+
+/*
+ * The return value from ofw() in all cases is 0 if the attempt to call the
+ * function succeeded, <0 otherwise. That return value is from the
+ * gateway function only. Any results from the called function are returned
+ * via output argument pointers.
+ *
+ * Here are call templates for all the standard OFW client services:
+ *
+ * ofw("test", 1, 1, namestr, &missing);
+ * ofw("peer", 1, 1, phandle, &sibling_phandle);
+ * ofw("child", 1, 1, phandle, &child_phandle);
+ * ofw("parent", 1, 1, phandle, &parent_phandle);
+ * ofw("instance_to_package", 1, 1, ihandle, &phandle);
+ * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
+ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
+ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
+ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
+ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
+ * ofw("finddevice", 1, 1, devspecstr, &phandle);
+ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
+ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
+ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
+ * ofw("open", 1, 1, devspecstr, &ihandle);
+ * ofw("close", 1, 0, ihandle);
+ * ofw("read", 3, 1, ihandle, addr, len, &actual);
+ * ofw("write", 3, 1, ihandle, addr, len, &actual);
+ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
+ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
+ * ofw("release", 2, 0, virtaddr, size);
+ * ofw("boot", 1, 0, bootspecstr);
+ * ofw("enter", 0, 0);
+ * ofw("exit", 0, 0);
+ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
+ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
+ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
+ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
+ * ofw("milliseconds", 0, 1, &ms);
+ */
+
+int ofw(char *name, int numargs, int numres, ...)
+{
+ va_list ap;
+ int argarray[MAXARGS+3];
+ int argnum = 3;
+ int retval;
+ int *intp;
+ unsigned long flags;
+
+ if (!call_firmware)
+ return -1;
+ if ((numargs + numres) > MAXARGS)
+ return -1; /* spit out an error? */
+
+ argarray[0] = (int) name;
+ argarray[1] = numargs;
+ argarray[2] = numres;
+
+ va_start(ap, numres);
+ while (numargs) {
+ argarray[argnum++] = va_arg(ap, int);
+ numargs--;
+ }
+
+ spin_lock_irqsave(&prom_lock, flags);
+ retval = call_firmware(argarray);
+ spin_unlock_irqrestore(&prom_lock, flags);
+
+ if (retval == 0) {
+ while (numres) {
+ intp = va_arg(ap, int *);
+ *intp = argarray[argnum++];
+ numres--;
+ }
+ }
+ va_end(ap);
+ return retval;
+}
+EXPORT_SYMBOL(ofw);
--- /dev/null
+/* olpc-pm.c
+ * © 2006 Red Hat, Inc.
+ * Portions also copyright 2006 Advanced Micro Devices, Inc.
+ * GPLv2
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/suspend.h>
+#include <linux/bootmem.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/mc146818rtc.h>
+#include <asm/io.h>
+
+#include <asm/olpc.h>
+
+/* A few words about accessing the ACPI and PM registers. Long story short,
+ byte and word accesses of the ACPI and PM registers is broken. The only
+ way to do it really correctly is to use dword accesses, which we do
+ throughout this code. For more details, please consult Eratta 17 and 18
+ here:
+
+ http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
+*/
+
+#define PM_IRQ 3
+
+#define CS5536_PM_PWRBTN (1 << 8)
+#define CS5536_PM_RTC (1 << 10)
+
+#define GPIO_WAKEUP_EC (1 << 31)
+#define GPIO_WAKEUP_LID (1 << 30)
+
+#define PM_MODE_NORMAL 0
+#define PM_MODE_TEST 1
+#define PM_MODE_MAX 2
+
+/* These, and the battery EC commands, should be in an olpc.h. */
+#define EC_WRITE_SCI_MASK 0x1b
+#define EC_READ_SCI_MASK 0x1c
+
+extern void do_olpc_suspend_lowlevel(void);
+
+static struct {
+ unsigned long address;
+ unsigned short segment;
+} ofw_bios_entry = { 0, __KERNEL_CS };
+
+static int olpc_pm_mode = PM_MODE_NORMAL;
+static unsigned long acpi_base;
+static unsigned long pms_base;
+static int sci_irq;
+static int olpc_lid_flag;
+
+static struct input_dev *pm_inputdev;
+static struct input_dev *lid_inputdev;
+static struct input_dev *ebook_inputdev;
+static struct pm_ops olpc_pm_ops;
+
+static int gpio_wake_events = 0;
+static int ebook_state = -1;
+static u16 olpc_wakeup_mask = 0;
+
+struct platform_device olpc_powerbutton_dev = {
+ .name = "powerbutton",
+ .id = -1,
+};
+
+struct platform_device olpc_lid_dev = {
+ .name = "lid",
+ .id = -1,
+};
+
+static void __init init_ebook_state(void)
+{
+ if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
+ printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n");
+ ebook_state = 0;
+ }
+ ebook_state &= 1;
+
+ /* the input layer needs to know what value to default to as well */
+ input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
+ input_sync(ebook_inputdev);
+}
+
+static void (*battery_callback)(unsigned long);
+static DEFINE_SPINLOCK(battery_callback_lock);
+
+/* propagate_events is non-NULL if run from workqueue,
+ NULL when called at init time to flush SCI queue */
+static void process_sci_queue(struct work_struct *propagate_events)
+{
+ unsigned char data = 0;
+ unsigned char battery_events = 0;
+ int ret;
+
+ do {
+ ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
+ if (!ret) {
+ printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n",
+ data);
+
+ switch (data) {
+ case EC_SCI_SRC_EMPTY:
+ case EC_SCI_SRC_GAME:
+ case EC_SCI_SRC_WLAN:
+ /* we ignore these for now */
+ break;
+ case EC_SCI_SRC_BATERR:
+ printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n");
+ case EC_SCI_SRC_BATSOC:
+ case EC_SCI_SRC_BATTERY:
+ case EC_SCI_SRC_ACPWR:
+ battery_events |= data;
+ break;
+ case EC_SCI_SRC_EBOOK:
+ ebook_state = !ebook_state;
+ if (propagate_events) {
+ input_report_switch(ebook_inputdev,
+ SW_TABLET_MODE, ebook_state);
+ input_sync(ebook_inputdev);
+ }
+ break;
+ default:
+ printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data);
+ }
+ }
+ } while (data && !ret);
+
+ if (battery_events && battery_callback && propagate_events) {
+ void (*cbk)(unsigned long);
+
+ /* Older EC versions didn't distinguish between AC and battery
+ events */
+ if (olpc_platform_info.ecver < 0x45)
+ battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
+
+ spin_lock(&battery_callback_lock);
+ cbk = battery_callback;
+ spin_unlock(&battery_callback_lock);
+
+ cbk(battery_events);
+ }
+
+ if (ret)
+ printk(KERN_WARNING "Failed to clear SCI queue!\n");
+}
+
+static DECLARE_WORK(sci_work, process_sci_queue);
+
+void olpc_register_battery_callback(void (*f)(unsigned long))
+{
+ spin_lock(&battery_callback_lock);
+ battery_callback = f;
+ spin_unlock(&battery_callback_lock);
+}
+EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
+
+void olpc_deregister_battery_callback(void)
+{
+ spin_lock(&battery_callback_lock);
+ battery_callback = NULL;
+ spin_unlock(&battery_callback_lock);
+ cancel_work_sync(&sci_work);
+}
+EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
+
+
+static int olpc_pm_interrupt(int irq, void *id)
+{
+ uint32_t sts, gpe = 0;
+
+ sts = inl(acpi_base + PM1_STS);
+ outl(sts | 0xFFFF, acpi_base + PM1_STS);
+
+ if (olpc_get_rev() >= OLPC_REV_B2) {
+ gpe = inl(acpi_base + PM_GPE0_STS);
+ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
+ }
+
+ if (sts & CS5536_PM_PWRBTN) {
+ input_report_key(pm_inputdev, KEY_POWER, 1);
+ input_sync(pm_inputdev);
+ printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n");
+ /* Do we need to delay this (and hence schedule_work)? */
+ input_report_key(pm_inputdev, KEY_POWER, 0);
+ input_sync(pm_inputdev);
+ }
+
+ if (gpe & GPIO_WAKEUP_EC) {
+ geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
+ schedule_work(&sci_work);
+ }
+
+ if (gpe & GPIO_WAKEUP_LID) {
+ /* Disable events */
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+
+ /* Clear the edge */
+
+ if (olpc_lid_flag)
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+ else
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+ /* Clear the status too */
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+
+ /* The line is high when the LID is open, but SW_LID
+ * should be high when the LID is closed, so we pass the old
+ * value of olpc_lid_flag
+ */
+
+ input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
+ input_sync(lid_inputdev);
+
+ /* Swap the status */
+ olpc_lid_flag = !olpc_lid_flag;
+
+ if (olpc_lid_flag)
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+ else
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+ /* re-enable the event */
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * For now, only support STR. We also don't support suspending on
+ * B1s, due to difficulties with the cafe FPGA.
+ */
+static int olpc_pm_state_valid(suspend_state_t pm_state)
+{
+ if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1))
+ return 1;
+
+ return 0;
+}
+
+/* This is a catchall function for operations that just don't belong
+ * anywhere else. Later we will evaluate if these belong in the
+ * individual device drivers or the firmware.
+ * If you add something to this function, please explain yourself with
+ * a comment.
+ */
+
+extern void gxfb_flatpanel_control(int state);
+
+static u32 gpio_wakeup[2];
+static u64 irq_sources[4];
+static u64 mfgpt_irq_msr, mfgpt_nr_msr;
+
+void olpc_fixup_wakeup(void)
+{
+ u32 base = geode_gpio_base();
+ int i;
+
+ /* This clears any pending events from the status register -
+ * the firmware also does this, but its possible that it tries
+ * it too early before the key has a chance to debounce
+ */
+
+ outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS);
+
+ /* Enable the flatpanel sequencing as early as possible, because
+ it takes ~64ms to resume. This probably belongs in the firmware */
+
+ //gxfb_flatpanel_control(1);
+
+ /* Restore the interrupt sources */
+ wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
+ wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
+ wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
+ wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
+
+ /* Restore the X and Y sources for GPIO */
+ outl(gpio_wakeup[0], base + GPIO_MAP_X);
+ outl(gpio_wakeup[1], base + GPIO_MAP_Y);
+
+ /* Resture the MFGPT MSRs */
+ wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
+ wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
+
+ for (i=0;i<2;i++) {
+ /* tell the wireless module to restart USB communication */
+ olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
+ }
+}
+
+void olpc_fixup_sleep(void)
+{
+ u32 base = geode_gpio_base();
+ int i;
+
+ /* Save the X and Y sources for GPIO */
+ gpio_wakeup[0] = inl(base + GPIO_MAP_X);
+ gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
+
+ /* Save the Y and Z unrestricted sources */
+
+ rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
+ rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
+ rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
+ rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
+
+ /* Turn off the MFGPT timers on the way down */
+
+ for(i = 0; i < 8; i++) {
+ u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
+
+ if (val & MFGPT_SETUP_SETUP) {
+ val &= ~MFGPT_SETUP_CNTEN;
+ geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
+ }
+ }
+
+ /* Save the MFGPT MSRs */
+ rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
+ rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
+
+ if (device_may_wakeup(&olpc_powerbutton_dev.dev))
+ olpc_wakeup_mask |= CS5536_PM_PWRBTN;
+ else
+ olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
+
+ if (device_may_wakeup(&olpc_lid_dev.dev)) {
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+ gpio_wake_events |= GPIO_WAKEUP_LID;
+ } else {
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+ gpio_wake_events &= ~(GPIO_WAKEUP_LID);
+ }
+}
+
+static int olpc_pm_enter(suspend_state_t pm_state)
+{
+ /* Only STR is supported */
+ if (pm_state != PM_SUSPEND_MEM)
+ return -EINVAL;
+
+ olpc_fixup_sleep();
+
+ /* Set the GPIO wakeup bits */
+ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
+ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
+
+ /* Save CPU state */
+ do_olpc_suspend_lowlevel();
+
+ olpc_fixup_wakeup();
+
+ /* Restore the SCI wakeup events */
+ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
+
+ return 0;
+}
+
+int asmlinkage olpc_do_sleep(u8 sleep_state)
+{
+ void *pgd_addr = __va(read_cr3());
+ printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
+ * that gcc doesn't optimize
+ * away our __va! */
+ /* FIXME: Set the SCI bits we want to wake up on here */
+
+ /* FIXME: Set any other SCI events that we might want here */
+
+ outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
+
+ /* If we are in test mode, then just return (simulate a successful
+ suspend/resume). Otherwise, if we are doing the real thing,
+ then go for the gusto */
+
+ if (olpc_pm_mode != PM_MODE_TEST) {
+ __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
+ __asm__("call *(%%edi); cld"
+ : : "D" (&ofw_bios_entry));
+ }
+
+ return 0;
+}
+
+/* This code will slowly disappear as we fixup the issues in the BIOS */
+
+static void __init olpc_fixup_bios(void)
+{
+ unsigned long hi, lo;
+
+ if (olpc_has_vsa()) {
+ /* The VSA aggressively sets up the ACPI and PM register for
+ * trapping - its not enough to force these values in the BIOS -
+ * they seem to be changed during PCI init as well.
+ */
+
+ /* Change the PM registers to decode to the DD */
+
+ rdmsr(0x510100e2, lo, hi);
+ hi |= 0x80000000;
+ wrmsr(0x510100e2, lo, hi);
+
+ /* Change the ACPI registers to decode to the DD */
+
+ rdmsr(0x510100e3, lo, hi);
+ hi |= 0x80000000;
+ wrmsr(0x510100e3, lo, hi);
+ }
+
+ /* GPIO24 controls WORK_AUX */
+
+ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
+ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
+
+ if (olpc_get_rev() >= OLPC_REV_B2) {
+ /* GPIO10 is connected to the thermal alarm */
+ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
+ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
+
+ /* Set up to get LID events */
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
+
+ /* Clear edge detection and event enable for now */
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
+
+ /* Set the LID to cause an PME event on group 6 */
+ geode_gpio_event_pme(OLPC_GPIO_LID, 6);
+
+ /* Set PME group 6 to fire the SCI interrupt */
+ geode_gpio_set_irq(6, sci_irq);
+ }
+
+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
+
+ /* Clear pending events */
+
+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
+
+ //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
+ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
+
+ /* Set the SCI to cause a PME event on group 7 */
+ geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
+
+ /* And have group 6 also fire the SCI interrupt */
+ geode_gpio_set_irq(7, sci_irq);
+}
+
+/* This provides a control file for setting up testing of the
+ power management system. For now, there is just one setting:
+ "test" which means that we don't actually enter the power
+ off routine.
+*/
+
+static const char * const pm_states[] = {
+ [PM_MODE_NORMAL] = "normal",
+ [PM_MODE_TEST] = "test",
+};
+
+extern struct mutex pm_mutex;
+extern struct kset power_subsys;
+
+static ssize_t control_show(struct kset *s, char *buf)
+{
+ return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
+}
+
+static ssize_t control_store(struct kset *s, const char *buf, size_t n)
+{
+ int i, len;
+ char *p;
+
+ p = memchr(buf, '\n', n);
+ len = p ? p - buf : n;
+
+ /* Grab the mutex */
+ mutex_lock(&pm_mutex);
+
+ for(i = 0; i < PM_MODE_MAX; i++) {
+ if (!strncmp(buf, pm_states[i], len)) {
+ olpc_pm_mode = i;
+ break;
+ }
+ }
+
+ mutex_unlock(&pm_mutex);
+
+ return (i == PM_MODE_MAX) ? -EINVAL : n;
+}
+
+static struct subsys_attribute control_attr = {
+ .attr = {
+ .name = "olpc-pm",
+ .mode = 0644,
+ },
+ .show = control_show,
+ .store = control_store,
+};
+
+static struct attribute * olpc_attributes[] = {
+ &control_attr.attr,
+ NULL
+};
+
+static struct attribute_group olpc_attrs = {
+ .attrs = olpc_attributes,
+};
+
+static int __init alloc_inputdevs(void)
+{
+ int ret = -ENOMEM;
+
+ pm_inputdev = input_allocate_device();
+ if (!pm_inputdev)
+ goto err;
+
+ pm_inputdev->name = "OLPC PM";
+ pm_inputdev->phys = "olpc_pm/input0";
+ set_bit(EV_KEY, pm_inputdev->evbit);
+ set_bit(KEY_POWER, pm_inputdev->keybit);
+
+ ret = input_register_device(pm_inputdev);
+ if (ret) {
+ printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret);
+ goto err;
+ }
+
+ lid_inputdev = input_allocate_device();
+ if (!lid_inputdev)
+ goto err;
+
+ lid_inputdev->name = "OLPC lid switch";
+ lid_inputdev->phys = "olpc_pm/input1";
+ set_bit(EV_SW, lid_inputdev->evbit);
+ set_bit(SW_LID, lid_inputdev->swbit);
+
+ ret = input_register_device(lid_inputdev);
+ if (ret) {
+ printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret);
+ goto err;
+ }
+
+ ebook_inputdev = input_allocate_device();
+ if (!ebook_inputdev)
+ goto err;
+
+ ebook_inputdev->name = "OLPC ebook switch";
+ ebook_inputdev->phys = "olpc_pm/input2";
+ set_bit(EV_SW, ebook_inputdev->evbit);
+ set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
+
+ ret = input_register_device(ebook_inputdev);
+ if (ret) {
+ printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret);
+ goto err;
+ }
+
+ return ret;
+err:
+ if (ebook_inputdev) {
+ input_unregister_device(ebook_inputdev);
+ ebook_inputdev = NULL;
+ }
+ if (lid_inputdev) {
+ input_unregister_device(lid_inputdev);
+ lid_inputdev = NULL;
+ }
+ if (pm_inputdev) {
+ input_unregister_device(pm_inputdev);
+ pm_inputdev = NULL;
+ }
+
+ return ret;
+}
+
+static int __init olpc_pm_init(void)
+{
+ uint32_t lo, hi;
+ int ret;
+ uint8_t ec_byte;
+
+ if (!machine_is_olpc())
+ return -ENODEV;
+
+ acpi_base = geode_acpi_base();
+ pms_base = geode_pms_base();
+
+ if (!acpi_base || !pms_base)
+ return -ENODEV;
+
+ ret = alloc_inputdevs();
+ if (ret)
+ return ret;
+
+ rdmsr(0x51400020, lo, hi);
+ sci_irq = (lo >> 20) & 15;
+
+ if (sci_irq) {
+ printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
+ } else {
+ /* Zero doesn't mean zero -- it means masked */
+ printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
+ sci_irq = 3;
+ lo |= 0x00300000;
+ wrmsrl(0x51400020, lo);
+ }
+
+ olpc_fixup_bios();
+
+ lo = inl(pms_base + PM_FSD);
+
+ /* Lock, enable failsafe, 4 seconds */
+ outl(0xc001f400, pms_base + PM_FSD);
+
+ /* Here we set up the SCI events we're interested in during
+ * real-time. We have no sleep button, and the RTC doesn't make
+ * sense, so set up the power button
+ */
+
+ outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
+
+ if (olpc_get_rev() >= OLPC_REV_B2) {
+ gpio_wake_events |= GPIO_WAKEUP_LID;
+
+ /* Get the current value of the GPIO, and set up the edges */
+ olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
+
+ /* Watch for the opposite edge */
+
+ if (olpc_lid_flag)
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
+ else
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
+
+ /* Enable the event */
+ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
+ }
+
+ /* Set up the mask for wakeups the EC will generate SCIs on */
+
+ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1);
+ if (ret)
+ printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret);
+
+ /* Disable battery 1% charge wakeups */
+ ec_byte &= ~EC_SCI_SRC_BATSOC;
+
+ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0);
+ if (ret)
+ printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret);
+
+ /* Set up the EC SCI */
+
+ gpio_wake_events |= GPIO_WAKEUP_EC;
+
+ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
+ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
+
+ /* Select level triggered in PIC */
+
+ if (sci_irq < 8) {
+ lo = inb(0x4d0);
+ lo |= 1 << sci_irq;
+ outb(lo, 0x4d0);
+ } else {
+ lo = inb(0x4d1);
+ lo |= 1 << (sci_irq - 8);
+ outb(lo, 0x4d1);
+ }
+ /* Clear pending interrupt */
+ outl(inl(acpi_base) | 0xFFFF, acpi_base);
+ process_sci_queue(0); /* we just want to flush the queue here */
+ init_ebook_state();
+
+ /* Enable the interrupt */
+
+ ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
+
+ if (ret) {
+ printk(KERN_ERR "Error registering SCI: %d\n", ret);
+ return ret;
+ }
+
+ ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
+ pm_set_ops(&olpc_pm_ops);
+
+ sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
+
+ return 0;
+}
+
+
+#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
+struct resource rtc_platform_resource[2] = {
+ {
+ .flags = IORESOURCE_IO,
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(0) + RTC_IO_EXTENT
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = 8,
+ .end = 8,
+ },
+};
+
+
+static void rtc_wake_on(struct device *dev)
+{
+ olpc_wakeup_mask |= CS5536_PM_RTC;
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+ olpc_wakeup_mask &= ~(CS5536_PM_RTC);
+}
+
+static struct cmos_rtc_board_info rtc_info = {
+ .rtc_day_alarm = 0,
+ .rtc_mon_alarm = 0,
+ .rtc_century = 0,
+ .wake_on = rtc_wake_on,
+ .wake_off = rtc_wake_off,
+};
+
+struct platform_device olpc_rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_platform_resource),
+ .dev.platform_data = &rtc_info,
+ .resource = rtc_platform_resource,
+};
+
+static int __init olpc_platform_init(void)
+{
+ (void)platform_device_register(&olpc_rtc_device);
+ device_init_wakeup(&olpc_rtc_device.dev, 1);
+
+ (void)platform_device_register(&olpc_powerbutton_dev);
+ device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
+
+ (void)platform_device_register(&olpc_lid_dev);
+ device_init_wakeup(&olpc_lid_dev.dev, 1);
+
+ return 0;
+}
+arch_initcall(olpc_platform_init);
+#endif /* CONFIG_RTC_DRV_CMOS */
+
+static void olpc_pm_exit(void)
+{
+ /* Clear any pending events, and disable them */
+ outl(0xFFFF, acpi_base+2);
+
+ free_irq(sci_irq, &acpi_base);
+ input_unregister_device(pm_inputdev);
+ input_unregister_device(lid_inputdev);
+ input_unregister_device(ebook_inputdev);
+}
+
+static struct pm_ops olpc_pm_ops = {
+ .valid = olpc_pm_state_valid,
+ .enter = olpc_pm_enter,
+};
+
+module_init(olpc_pm_init);
+module_exit(olpc_pm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
--- /dev/null
+.text
+
+ENTRY(olpc_sleep_asm)
+olpc_sleep:
+ ;; Get the value of PM1_CNT and store it off
+
+ add 08h, ax
+ mov bx,dx
+ in dx,eax
+ or 2000h, ax
+ mov ax,di
+
+ ;; flush the cache
+ wbinvd
+
+ ;; GX2 must disable refresh before going into self-refresh
+ mov 2000000180xh, ecx
+ rdmsr
+ mov eax, esi
+ and 0FF0000FFh, eax
+ wrmsr
+
+ ;; Now, put the memory into self refresh
+ mov 2004, cx
+ xor edx, edx
+ xor eax, eax
+ mov 04h, al
+ wrmsr
+
+ ;; Thats all she wrote - time to go to sleep
+
+ mov bx, dx
+ movzx di, eax
+ out eax, dx
+
+ ;;
+
+
+
--- /dev/null
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+ALIGN
+ .align 4096
+
+wakeup_start:
+# jmp wakeup_start
+
+ cli
+ cld
+
+ # Clear any dangerous flags
+
+ pushl $0
+ popfl
+
+ # Set up %cr3
+ movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
+ movl %eax, %cr3
+
+ movl saved_cr4, %eax
+ movl %eax, %cr4
+
+ movl saved_cr0, %eax
+ movl %eax, %cr0
+
+ jmp 1f
+1:
+ ljmpl $__KERNEL_CS,$wakeup_return
+
+
+.org 0x1000
+
+wakeup_return:
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+
+ lgdt saved_gdt
+ lidt saved_idt
+ lldt saved_ldt
+ ljmp $(__KERNEL_CS),$1f
+1:
+ movl %cr3, %eax
+ movl %eax, %cr3
+ wbinvd
+
+ # Go back to the return point
+ jmp ret_point
+
+save_registers:
+ sgdt saved_gdt
+ sidt saved_idt
+ sldt saved_ldt
+
+ pushl %edx
+ movl %cr4, %edx
+ movl %edx, saved_cr4
+
+ movl %cr0, %edx
+ movl %edx, saved_cr0
+
+ popl %edx
+
+
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+
+ pushfl
+ popl saved_context_eflags
+
+ ret
+
+
+restore_registers:
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+
+ pushl saved_context_eflags
+ popfl
+
+ ret
+
+
+ENTRY(do_olpc_suspend_lowlevel)
+ call save_processor_state
+ call save_registers
+
+ # This is the stack context we want to remember
+ movl %esp, saved_context_esp
+
+ pushl $3
+ call olpc_do_sleep
+
+ jmp wakeup_start
+ .p2align 4,,7
+ret_point:
+ movl saved_context_esp, %esp
+
+ call restore_registers
+ call restore_processor_state
+ ret
+
+.data
+ALIGN
+
+saved_gdt: .long 0,0
+saved_idt: .long 0,0
+saved_ldt: .long 0
+saved_cr4: .long 0
+saved_cr0: .long 0
+
--- /dev/null
+/* Support for the OLPC DCON and OLPC EC access
+ * Copyright (C) 2006, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/olpc.h>
+#include <asm/ofw.h>
+
+/* This is our new multi-purpose structure used to contain the
+ * information about the platform that we detect
+ */
+
+struct olpc_platform_t olpc_platform_info;
+EXPORT_SYMBOL_GPL(olpc_platform_info);
+
+/*********************************************************************
+ * EC locking and access
+ *********************************************************************/
+
+static DEFINE_SPINLOCK(ec_lock);
+
+/* what the timeout *should* be (in ms) */
+#define EC_BASE_TIMEOUT 20
+
+/* the timeout that bugs in the EC might force us to actually use */
+static int ec_timeout = EC_BASE_TIMEOUT;
+
+static int __init olpc_ec_timeout_set(char *str)
+{
+ if (get_option(&str, &ec_timeout) != 1) {
+ ec_timeout = EC_BASE_TIMEOUT;
+ printk(KERN_ERR "olpc-ec: invalid argument to "
+ "'olpc_ec_timeout=', ignoring!\n");
+ }
+ printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
+ ec_timeout);
+ return 1;
+}
+__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
+
+/*
+ * These *bf_status functions return whether the buffers are full or not.
+ */
+
+static inline unsigned int ibf_status(unsigned int port)
+{
+ return inb(port) & 0x02;
+}
+
+static inline unsigned int obf_status(unsigned int port)
+{
+ return inb(port) & 0x01;
+}
+
+#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
+static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
+{
+ unsigned int timeo;
+ int state = ibf_status(port);
+
+ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+ mdelay(1);
+ state = ibf_status(port);
+ }
+
+ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+ printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n",
+ EC_BASE_TIMEOUT-timeo, line);
+ }
+
+ return !(state == desired);
+}
+
+#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
+static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
+{
+ unsigned int timeo;
+ int state = obf_status(port);
+
+ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
+ mdelay(1);
+ state = obf_status(port);
+ }
+
+ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
+ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
+ printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n",
+ EC_BASE_TIMEOUT-timeo, line);
+ }
+
+ return !(state == desired);
+}
+
+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+ unsigned char *outbuf, size_t outlen)
+{
+ unsigned long flags;
+ int ret = -EIO;
+ int i;
+
+ spin_lock_irqsave(&ec_lock, flags);
+
+ if (wait_on_ibf(0x6c, 0)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
+ "quiesce!\n");
+ goto err;
+ }
+
+restart:
+ /*
+ * Note that if we time out during any IBF checks, that's a failure;
+ * we have to return. There's no way for the kernel to clear that.
+ *
+ * If we time out during an OBF check, we can restart the command;
+ * reissuing it will clear the OBF flag, and we should be alright.
+ * The OBF flag will sometimes misbehave due to what we believe
+ * is a hardware quirk..
+ */
+ printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd);
+ outb(cmd, 0x6c);
+
+ if (wait_on_ibf(0x6c, 0)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
+ "command!\n");
+ goto err;
+ }
+
+ if (inbuf && inlen) {
+ /* write data to EC */
+ for (i = 0; i < inlen; i++) {
+ if (wait_on_ibf(0x6c, 0)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for"
+ " EC accept data!\n");
+ goto err;
+ }
+ printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n",
+ inbuf[i]);
+ outb(inbuf[i], 0x68);
+ }
+ }
+ if (outbuf && outlen) {
+ /* read data from EC */
+ for (i = 0; i < outlen; i++) {
+ if (wait_on_obf(0x6c, 1)) {
+ printk(KERN_ERR "olpc-ec: timeout waiting for"
+ " EC to provide data!\n");
+ goto restart;
+ }
+ outbuf[i] = inb(0x68);
+ printk(KERN_DEBUG "olpc-ec: received 0x%x\n",
+ outbuf[i]);
+ }
+ }
+
+ ret = 0;
+err:
+ spin_unlock_irqrestore(&ec_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(olpc_ec_cmd);
+
+/*********************************************************************
+ * DCON stuff
+ *********************************************************************/
+
+static void olpc_power_off(void)
+{
+ printk(KERN_INFO "OLPC power off sequence...\n");
+ outb(0xff, 0x381);
+ outb(0x14, 0x382);
+ outb(0x01, 0x383);
+ outb(0xff, 0x381);
+ outb(0x14, 0x382);
+ outb(0x00, 0x383);
+}
+
+static void __init
+ec_detect(void)
+{
+ olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
+}
+
+/* Check to see if this version of the OLPC board has VSA built
+ * in, and set a flag
+ */
+
+static void __init vsa_detect(void)
+{
+ u16 rev;
+
+ outw(0xFC53, 0xAC1C);
+ outw(0x0003, 0xAC1C);
+
+ rev = inw(0xAC1E);
+
+ if (rev == 0x4132)
+ olpc_platform_info.flags |= OLPC_F_VSA;
+}
+
+/* Map OFW revisions to what OLPC_REV_* */
+static const char __initdata *olpc_boardrev_str[] = {
+ "A1",
+ "preB1",
+ "B1",
+ "preB2",
+ "B2",
+ "preB3",
+ "B3",
+ "B4",
+ "C1",
+ "R1",
+};
+
+static void __init platform_detect(char *revision, size_t len)
+{
+ size_t propsize;
+ int i;
+
+ BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN);
+
+ if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) {
+ printk(KERN_ERR "ofw: getprop call failed!\n");
+ goto failed;
+ }
+ if (len < propsize) {
+ printk(KERN_ERR "ofw: revision string is too long!\n");
+ goto failed;
+ }
+
+ for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) {
+ if (strcmp(revision, olpc_boardrev_str[i]) == 0) {
+ olpc_platform_info.boardrev = i;
+ return;
+ }
+ }
+
+failed:
+ strncpy(revision, "Unknown", len);
+ olpc_platform_info.boardrev = OLPC_REV_UNKNOWN;
+}
+
+static int olpc_dcon_present = -1;
+module_param(olpc_dcon_present, int, 0444);
+
+/* REV_A CMOS map:
+ * bit 440; DCON present bit
+ */
+
+#define OLPC_CMOS_DCON_OFFSET (440 / 8)
+#define OLPC_CMOS_DCON_MASK 0x01
+
+static int __init olpc_init(void)
+{
+ unsigned char *romsig;
+ char revision[10];
+
+ spin_lock_init(&ec_lock);
+
+ romsig = ioremap(0xffffffc0, 16);
+
+ if (!romsig)
+ return 0;
+
+ if (strncmp(romsig, "CL1 Q", 7))
+ goto unmap;
+ if (strncmp(romsig+6, romsig+13, 3)) {
+ printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
+ goto unmap;
+ }
+ printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
+
+ olpc_platform_info.flags |= OLPC_F_PRESENT;
+
+ pm_power_off = olpc_power_off;
+
+ /* Get the platform revision */
+ platform_detect(revision, sizeof(revision));
+
+ /* If olpc_dcon_present isn't set by the command line, then
+ * "detect" it
+ */
+
+ if (olpc_dcon_present == -1) {
+ /* B1 and greater always has a DCON */
+ if (olpc_platform_info.boardrev >= OLPC_REV_B1 &&
+ olpc_platform_info.boardrev < OLPC_REV_UNKNOWN)
+ olpc_dcon_present = 1;
+ }
+
+ if (olpc_dcon_present)
+ olpc_platform_info.flags |= OLPC_F_DCON;
+
+ /* Get the EC revision */
+ ec_detect();
+
+ /* Check to see if the VSA exists */
+ vsa_detect();
+
+ printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision,
+ olpc_platform_info.ecver);
+
+ unmap:
+ iounmap(romsig);
+
+ return 0;
+}
+
+postcore_initcall(olpc_init);
--- /dev/null
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ * {engebret|bergner}@us.ibm.com
+ *
+ * Adapted for sparc64 by David S. Miller davem@davemloft.net
+ *
+ * Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/prom.h>
+#include <asm/ofw.h>
+
+/*
+ * XXX: This is very much a stub; right now we're keeping 2 device trees
+ * in memory (one for promfs, and one here). That will not remain
+ * for long!
+ */
+
+static struct device_node *allnodes;
+
+/* use when traversing tree through the allnext, child, sibling,
+ * or parent members of struct device_node.
+ */
+static DEFINE_RWLOCK(devtree_lock);
+
+int of_device_is_compatible(const struct device_node *device,
+ const char *compat)
+{
+ const char* cp;
+ int cplen, l;
+
+ cp = of_get_property(device, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(of_device_is_compatible);
+
+struct device_node *of_get_parent(const struct device_node *node)
+{
+ struct device_node *np;
+
+ if (!node)
+ return NULL;
+
+ np = node->parent;
+
+ return np;
+}
+EXPORT_SYMBOL(of_get_parent);
+
+struct device_node *of_get_next_child(const struct device_node *node,
+ struct device_node *prev)
+{
+ struct device_node *next;
+
+ next = prev ? prev->sibling : node->child;
+ for (; next != 0; next = next->sibling) {
+ break;
+ }
+
+ return next;
+}
+EXPORT_SYMBOL(of_get_next_child);
+
+struct device_node *of_find_node_by_path(const char *path)
+{
+ struct device_node *np = allnodes;
+
+ for (; np != 0; np = np->allnext) {
+ if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
+ break;
+ }
+
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_path);
+
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+ struct device_node *np;
+
+ for (np = allnodes; np != 0; np = np->allnext)
+ if (np->node == handle)
+ break;
+
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+struct device_node *of_find_node_by_name(struct device_node *from,
+ const char *name)
+{
+ struct device_node *np;
+
+ np = from ? from->allnext : allnodes;
+ for (; np != NULL; np = np->allnext)
+ if (np->name != NULL && strcmp(np->name, name) == 0)
+ break;
+
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_name);
+
+struct device_node *of_find_node_by_type(struct device_node *from,
+ const char *type)
+{
+ struct device_node *np;
+
+ np = from ? from->allnext : allnodes;
+ for (; np != 0; np = np->allnext)
+ if (np->type != 0 && strcmp(np->type, type) == 0)
+ break;
+
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_type);
+
+struct device_node *of_find_compatible_node(struct device_node *from,
+ const char *type, const char *compatible)
+{
+ struct device_node *np;
+
+ np = from ? from->allnext : allnodes;
+ for (; np != 0; np = np->allnext) {
+ if (type != NULL
+ && !(np->type != 0 && strcmp(np->type, type) == 0))
+ continue;
+ if (of_device_is_compatible(np, compatible))
+ break;
+ }
+
+ return np;
+}
+EXPORT_SYMBOL(of_find_compatible_node);
+
+struct property *of_find_property(const struct device_node *np,
+ const char *name,
+ int *lenp)
+{
+ struct property *pp;
+
+ for (pp = np->properties; pp != 0; pp = pp->next) {
+ if (strcasecmp(pp->name, name) == 0) {
+ if (lenp != 0)
+ *lenp = pp->length;
+ break;
+ }
+ }
+ return pp;
+}
+EXPORT_SYMBOL(of_find_property);
+
+/*
+ * Find a property with a given name for a given node
+ * and return the value.
+ */
+const void *of_get_property(const struct device_node *np, const char *name,
+ int *lenp)
+{
+ struct property *pp = of_find_property(np,name,lenp);
+ return pp ? pp->value : NULL;
+}
+EXPORT_SYMBOL(of_get_property);
+
+int of_getintprop_default(struct device_node *np, const char *name, int def)
+{
+ struct property *prop;
+ int len;
+
+ prop = of_find_property(np, name, &len);
+ if (!prop || len != 4)
+ return def;
+
+ return *(int *) prop->value;
+}
+EXPORT_SYMBOL(of_getintprop_default);
+
+int of_n_addr_cells(struct device_node *np)
+{
+ const int* ip;
+ do {
+ if (np->parent)
+ np = np->parent;
+ ip = of_get_property(np, "#address-cells", NULL);
+ if (ip != NULL)
+ return *ip;
+ } while (np->parent);
+ /* No #address-cells property for the root node, default to 2 */
+ return 2;
+}
+EXPORT_SYMBOL(of_n_addr_cells);
+
+int of_n_size_cells(struct device_node *np)
+{
+ const int* ip;
+ do {
+ if (np->parent)
+ np = np->parent;
+ ip = of_get_property(np, "#size-cells", NULL);
+ if (ip != NULL)
+ return *ip;
+ } while (np->parent);
+ /* No #size-cells property for the root node, default to 1 */
+ return 1;
+}
+EXPORT_SYMBOL(of_n_size_cells);
+
+int of_set_property(struct device_node *dp, const char *name, void *val, int len)
+{
+ return -EIO;
+}
+EXPORT_SYMBOL(of_set_property);
+
+static unsigned int prom_early_allocated;
+
+static void * __init prom_early_alloc(unsigned long size)
+{
+ void *ret;
+
+ ret = kmalloc(size, GFP_KERNEL);
+ if (ret != NULL)
+ memset(ret, 0, size);
+ else
+ printk(KERN_ERR "ACK! couldn't allocate prom memory!\n");
+
+ prom_early_allocated += size;
+
+ return ret;
+}
+
+static int is_root_node(const struct device_node *dp)
+{
+ if (!dp)
+ return 0;
+
+ return (dp->parent == NULL);
+}
+
+static char * __init build_path_component(struct device_node *dp)
+{
+ int pathlen;
+ char *n, *i;
+
+ if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
+ printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
+ return "ERROR";
+ }
+ n = prom_early_alloc(pathlen + 1);
+ if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
+ printk(KERN_ERR "PROM: unable to get path name from OFW\n");
+
+ if ((i = strrchr(n, '/')))
+ n = ++i; /* we only want the file name */
+ return n;
+}
+
+static char * __init build_full_name(struct device_node *dp)
+{
+ int len, ourlen, plen;
+ char *n;
+
+ plen = strlen(dp->parent->full_name);
+ ourlen = strlen(dp->path_component_name);
+ len = ourlen + plen + 2;
+
+ n = prom_early_alloc(len);
+ strcpy(n, dp->parent->full_name);
+ if (!is_root_node(dp->parent)) {
+ strcpy(n + plen, "/");
+ plen++;
+ }
+ strcpy(n + plen, dp->path_component_name);
+
+ return n;
+}
+
+static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
+{
+ static struct property *tmp = NULL;
+ struct property *p;
+
+ if (tmp) {
+ p = tmp;
+ memset(p, 0, sizeof(*p) + 32);
+ tmp = NULL;
+ } else {
+ p = prom_early_alloc(sizeof(struct property) + 32);
+ }
+
+ p->name = (char *) (p + 1);
+ if (special_name) {
+ strcpy(p->name, special_name);
+ p->length = special_len;
+ p->value = prom_early_alloc(special_len);
+ memcpy(p->value, special_val, special_len);
+ } else {
+ int fl;
+ if (prev == NULL) {
+ if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
+ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
+ return NULL;
+ }
+ } else {
+ if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
+ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
+ return NULL;
+ }
+ }
+ if (strlen(p->name) == 0 || fl != 1) {
+ tmp = p;
+ return NULL;
+ }
+ if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
+ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
+ return NULL;
+ }
+ if (p->length <= 0) {
+ p->length = 0;
+ } else {
+ p->value = prom_early_alloc(p->length + 1);
+ if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
+ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
+ return NULL;
+ }
+ ((unsigned char *)p->value)[p->length] = '\0';
+ }
+ }
+ return p;
+}
+
+static struct property * __init build_prop_list(phandle node)
+{
+ struct property *head, *tail;
+
+ head = tail = build_one_prop(node, NULL,
+ ".node", &node, sizeof(node));
+
+ tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
+ tail = tail->next;
+ while(tail) {
+ tail->next = build_one_prop(node, tail->name,
+ NULL, NULL, 0);
+ tail = tail->next;
+ }
+
+ return head;
+}
+
+static char * __init get_one_property(phandle node, const char *name)
+{
+ char *buf = "<NULL>";
+ int len;
+
+ if (ofw("getproplen", 2, 1, node, name, &len)) {
+ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
+ return NULL;
+ }
+ if (len > 0) {
+ buf = prom_early_alloc(len);
+ if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
+ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
+ return NULL;
+ }
+ }
+
+ return buf;
+}
+
+static struct device_node * __init create_node(phandle node, struct device_node *parent)
+{
+ struct device_node *dp;
+
+ if (!node)
+ return NULL;
+
+ dp = prom_early_alloc(sizeof(*dp));
+ dp->parent = parent;
+
+ kref_init(&dp->kref);
+
+ dp->name = get_one_property(node, "name");
+ dp->type = get_one_property(node, "device_type");
+ dp->node = node;
+
+ dp->properties = build_prop_list(node);
+
+ return dp;
+}
+
+static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
+{
+ struct device_node *ret = NULL, *prev_sibling = NULL;
+ struct device_node *dp;
+ u32 child;
+
+ while (1) {
+ dp = create_node(node, parent);
+ if (!dp)
+ break;
+
+ if (prev_sibling)
+ prev_sibling->sibling = dp;
+
+ if (!ret)
+ ret = dp;
+ prev_sibling = dp;
+
+ *(*nextp) = dp;
+ *nextp = &dp->allnext;
+
+ dp->path_component_name = build_path_component(dp);
+ dp->full_name = build_full_name(dp);
+
+ if (ofw("child", 1, 1, node, &child)) {
+ printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
+ return NULL;
+ }
+ dp->child = build_tree(dp, child, nextp);
+
+ if (ofw("peer", 1, 1, node, &node)) {
+ printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
+ return NULL;
+ }
+ }
+
+ return ret;
+}
+
+static phandle root_node;
+
+void __init prom_build_devicetree(void)
+{
+ struct device_node **nextp;
+ u32 child;
+
+ if (ofw("peer", 1, 1, 0, &root_node)) {
+ printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
+ return;
+ }
+
+ allnodes = create_node(root_node, NULL);
+ allnodes->path_component_name = "";
+ allnodes->full_name = "/";
+
+ nextp = &allnodes->allnext;
+ if (ofw("child", 1, 1, allnodes->node, &child)) {
+ printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
+ return;
+ }
+ allnodes->child = build_tree(allnodes, child, &nextp);
+ printk("PROM: Built device tree with %u bytes of memory.\n",
+ prom_early_allocated);
+}
--- /dev/null
+/*
+ * olpcpci.c - Low-level PCI config space access for OLPC systems
+ * without the VSA PCI virtualization software.
+ *
+ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
+ * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
+ * that more or less behave like PCI devices, but the hardware doesn't
+ * directly implement the PCI configuration space headers. AMD provides
+ * "VSA" (Virtual System Architecture) software that emulates PCI config
+ * space for these devices, by trapping I/O accesses to PCI config register
+ * (CF8/CFC) and running some code in System Management Mode interrupt state.
+ * On the OLPC platform, we don't want to use that VSA code because
+ * (a) it slows down suspend/resume, and (b) recompiling it requires special
+ * compilers that are hard to get. So instead of letting the complex VSA
+ * code simulate the PCI config registers for the on-chip devices, we
+ * just simulate them the easy way, by inserting the code into the
+ * pci_write_config and pci_read_config path. Most of the config registers
+ * are read-only anyway, so the bulk of the simulation is just table lookup.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/olpc.h>
+#include <asm/geode.h>
+#include "pci.h"
+
+static int is_lx;
+
+/*
+ * In the tables below, the first two line (8 longwords) are the
+ * size masks that are used when the higher level PCI code determines
+ * the size of the region by writing ~0 to a base address register
+ * and reading back the result.
+ *
+ * The following lines are the values that are read during normal
+ * PCI config access cycles, i.e. not after just having written
+ * ~0 to a base address register.
+ */
+
+static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */
+ 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */
+ 0x0 , 0x0 , 0x0 , 0x28100b ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
+ 0xfffffffd , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */
+ 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */
+ 0x0 , 0x0 , 0x0 , 0x28100b ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
+ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */
+ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
+ 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */
+ 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
+ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */
+ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
+ 0x0 , 0x0 , 0x0 , 0x30100b ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */
+ 0xffffc000 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */
+ 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */
+ 0x0 , 0x0 , 0x0 , 0x20821022 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+
+static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */
+ 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
+ 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 ,
+
+ 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 ,
+ 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */
+ 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */
+ 0xffffff81 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 ,
+ 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */
+ 0x0 , 0x0 , 0x0 , 0x20931022 ,
+ 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */
+ 0xfffff000 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x20941022 , 0x2300006 , 0xc031002 , 0x0 ,
+ 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
+ 0x0 , 0x0 , 0x0 , 0x20941022 ,
+ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
+ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+};
+
+static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */
+ 0xfffff000 , 0x0 , 0x0 , 0x0 ,
+ 0x0 , 0x0 , 0x0 , 0x0 ,
+
+ 0x20951022 , 0x2300006 , 0xc032002 , 0x0 ,
+ 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
+ 0x0 , 0x0 , 0x0 , 0x20951022 ,
+ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
+ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
+#if 0
+ 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
+#endif
+ 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
+ 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */
+};
+
+static u32 ff_loc = ~0;
+static u32 zero_loc = 0;
+
+static int bar_probing = 0; /* Set after a write of ~0 to a BAR */
+
+#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */
+#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */
+#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
+
+static u32 *hdr_addr(const u32 *hdr, int reg)
+{
+ u32 addr;
+
+ /*
+ * This is a little bit tricky. The header maps consist of
+ * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
+ * In the normal case, when not probing a BAR's size, we want
+ * to access the header data, so we add 0x20 to the reg offset,
+ * thus skipping the size mask area.
+ * In the BAR probing case, we want to access the size mask for
+ * the BAR, so we subtract 0x10 (the config header offset for
+ * BAR0), and don't skip the size mask area.
+ */
+
+ addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
+
+ bar_probing = 0;
+ return (u32 *)addr;
+}
+
+static int pci_olpc_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ u32 *addr;
+
+ /* Use the hardware mechanism for non-simulated devices */
+ if (!SIMULATED(bus, devfn))
+ return pci_conf1_read(seg, bus, devfn, reg, len, value);
+
+ /*
+ * No device has config registers past 0x70, so we save table space
+ * by not storing entries for the nonexistent registers
+ */
+ if (reg >= 0x70)
+ addr = &zero_loc;
+ else {
+ switch (devfn) {
+ case 0x8:
+ addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
+ break;
+ case 0x9:
+ addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
+ break;
+ case 0xa:
+ addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
+ break;
+ case 0x78:
+ addr = hdr_addr(isa_hdr, reg);
+ break;
+ case 0x7b:
+ addr = hdr_addr(ac97_hdr, reg);
+ break;
+ case 0x7c:
+ addr = hdr_addr(ohci_hdr, reg);
+ break;
+ case 0x7d:
+ addr = hdr_addr(ehci_hdr, reg);
+ break;
+ default:
+ addr = &ff_loc;
+ break;
+ }
+ }
+ switch (len) {
+ case 1:
+ *value = *(u8 *) addr;
+ break;
+ case 2:
+ *value = *(u16 *) addr;
+ break;
+ case 4:
+ *value = *addr;
+ break;
+ default:
+ BUG();
+ }
+
+ return 0;
+}
+
+static int pci_olpc_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ /* Use the hardware mechanism for non-simulated devices */
+ if (!SIMULATED(bus, devfn))
+ return pci_conf1_write(seg, bus, devfn, reg, len, value);
+
+ /* XXX we may want to extend this to simulate EHCI power management */
+
+ /*
+ * Mostly we just discard writes, but if the write is a size probe
+ * (i.e. writing ~0 to a BAR), we remember it and arrange to return
+ * the appropriate size mask on the next read. This is cheating
+ * to some extent, because it depends on the fact that the next
+ * access after such a write will always be a read to the same BAR.
+ */
+
+ if ((reg >= 0x10) && (reg < 0x2c)) {
+ /* Write is to a BAR */
+ if (value == ~0)
+ bar_probing = 1;
+ } else {
+ /*
+ * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
+ * CACHE_LINE_SIZE, or PM registers.
+ */
+ if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
+ (reg != 0x0c) && (reg != 0x44))
+ printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
+ }
+
+ return 0;
+}
+
+static struct pci_raw_ops pci_olpc_conf = {
+ .read = pci_olpc_read,
+ .write = pci_olpc_write,
+};
+
+void __init pci_olpc_init(void)
+{
+ if (!machine_is_olpc() || olpc_has_vsa())
+ return;
+
+ printk(KERN_INFO "PCI: Using configuration type OLPC\n");
+ raw_pci_ops = &pci_olpc_conf;
+ is_lx = is_geode_lx();
+}
--- /dev/null
+/*
+ * OLPC touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006 One Laptop Per Child, inc.
+ * Authors Zephaniah E. Hull and Andres Salomon <dilinger@laptop.org>
+ *
+ * This driver is partly based on the ALPS driver, which is:
+ *
+ * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The touchpad on the OLPC is fairly wide, with the entire area usable
+ * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad
+ * ("GS mode").
+ *
+ * Earlier version of the device had simultaneous reporting; however, that
+ * was removed. Instead, the device now reports packets in one mode, and
+ * tells the driver when a mode switch needs to happen.
+ */
+
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/libps2.h>
+#include <linux/delay.h>
+#include <asm/olpc.h>
+
+#include "psmouse.h"
+#include "olpc.h"
+
+static int tpdebug;
+module_param(tpdebug, int, 0644);
+
+#define OLPC_GS 1 /* The GS sensor. */
+#define OLPC_PT 2 /* The PT sensor. */
+
+static struct olpc_model_info olpc_model_data[] = {
+ { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */
+ { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */
+ { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/
+ { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */
+ { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */
+ { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */
+};
+
+#define OLPC_PKT_PT 0xcf
+#define OLPC_PKT_GS 0xff
+
+static int olpc_absolute_mode(struct psmouse *psmouse, int mode);
+
+/*
+ * OLPC absolute Mode - single-mode format
+ *
+ * byte 0: 1 1 0 0 1 1 1 1
+ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw
+ * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw
+ * byte 3: 0 y9 y8 y7 1 0 swr swl
+ * byte 4: 0 y6 y5 y4 y3 y2 y1 y0
+ * byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+ *
+ * ?'s are not defined in the protocol spec, may vary between models.
+ *
+ * swr/swl are the left/right buttons.
+ *
+ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
+ * pen/finger
+ */
+
+static void olpc_process_packet_gspt(struct psmouse *psmouse)
+{
+ struct olpc_data *priv = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ struct input_dev *dev = psmouse->dev;
+ struct input_dev *dev2 = priv->dev2;
+ int x, y, z, gs_down = 0, pt_down = 0, left, right;
+ struct timeval now_tv;
+ s64 now_ns;
+
+ left = packet[3] & 1;
+ right = packet[3] & 2;
+ x = packet[1] | ((packet[2] & 0x78) << 4);
+ y = packet[4] | ((packet[3] & 0x70) << 3);
+ z = packet[5];
+
+ if (psmouse->packet[0] == OLPC_PKT_GS) {
+ pt_down = !!(packet[2] & 1);
+ gs_down = !!(packet[2] & 2);
+ } else if (psmouse->packet[0] == OLPC_PKT_PT) {
+ gs_down = !!(packet[2] & 1);
+ pt_down = !!(packet[2] & 2);
+ }
+
+ /*
+ * XXX: Kludge.
+ * If it's been more than 30ms since the last packet,
+ * assume that there was a lift we were never told about.
+ */
+ do_gettimeofday(&now_tv);
+ now_ns = timeval_to_ns (&now_tv);
+ if (now_ns >= priv->late) {
+ input_report_key(dev, BTN_TOUCH, 0);
+ input_report_key(dev, BTN_TOOL_PEN, 0);
+ input_report_key(dev2, BTN_TOUCH, 0);
+ input_report_key(dev2, BTN_TOOL_FINGER, 0);
+
+ input_sync(dev);
+ input_sync(dev2);
+ }
+
+ priv->late = now_ns + (30 * NSEC_PER_MSEC);
+
+
+ if (tpdebug) {
+ printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n",
+ __FUNCTION__, psmouse->packet[0], psmouse->packet[1],
+ psmouse->packet[2], psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5]);
+ printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n",
+ left, right, pt_down, gs_down, x, y, z);
+ }
+
+ if (psmouse->packet[0] == OLPC_PKT_PT) {
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+ } else if (psmouse->packet[0] == OLPC_PKT_GS) {
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev2, BTN_LEFT, left);
+ input_report_key(dev2, BTN_RIGHT, right);
+ }
+
+ input_report_key(dev, BTN_TOUCH, pt_down);
+ input_report_key(dev, BTN_TOOL_PEN, pt_down);
+ input_report_key(dev2, BTN_TOUCH, gs_down);
+ input_report_key(dev2, BTN_TOOL_FINGER, gs_down);
+
+ input_report_abs(dev2, ABS_PRESSURE, z);
+
+ if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) {
+ input_report_abs(dev2, ABS_X, x);
+ input_report_abs(dev2, ABS_Y, y);
+ }
+
+ input_sync(dev);
+ input_sync(dev2);
+
+ if (priv->pending_mode == OLPC_GS &&
+ psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
+ priv->pending_mode = 0;
+ cancel_delayed_work(&priv->mode_switch);
+ }
+
+ if (priv->i->flags & (OLPC_PT|OLPC_GS)) {
+ int pending = 0;
+ if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down)
+ pending = OLPC_GS;
+ else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down)
+ pending = OLPC_PT;
+
+ if (priv->current_mode == pending) {
+ priv->pending_mode = 0;
+ pending = priv->current_mode;
+ }
+ else if (priv->pending_mode != pending) {
+ priv->pending_mode = pending;
+ if (tpdebug)
+ printk(KERN_WARNING "Scheduling mode switch to %s.\n",
+ pending == OLPC_GS ? "GS" : "PT");
+
+ /*
+ * Apply a de-bounce when switching from PT to GS, to allow for
+ * spurious PT-up packets.
+ */
+ if (priv->pending_mode == OLPC_GS)
+ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
+ else
+ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0);
+ }
+ }
+}
+
+static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse)
+{
+ psmouse_ret_t ret = PSMOUSE_BAD_DATA;
+
+ if (psmouse->packet[0] != OLPC_PKT_PT &&
+ psmouse->packet[0] != OLPC_PKT_GS)
+ goto out;
+
+ /* Bytes 2 - 6 should have 0 in the highest bit */
+ if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
+ (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
+ goto out;
+
+ if (psmouse->pktcnt == 6) {
+ olpc_process_packet_gspt(psmouse);
+ ret = PSMOUSE_FULL_PACKET;
+ goto out;
+ }
+
+ ret = PSMOUSE_GOOD_DATA;
+out:
+ if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET)
+ printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
+ __FUNCTION__, psmouse->pktcnt, psmouse->packet[0],
+ psmouse->packet[1], psmouse->packet[2],
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5]);
+ return ret;
+}
+
+static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[4];
+ int i;
+
+ /*
+ * Now try "E7 report". Allowed responses are in
+ * olpc_model_data[].signature
+ */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
+ return NULL;
+
+ param[0] = param[1] = param[2] = 0xff;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return NULL;
+
+ pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x",
+ __LINE__, param[0], param[1], param[2]);
+
+ for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) {
+ if (!memcmp(param, olpc_model_data[i].signature,
+ sizeof(olpc_model_data[i].signature))) {
+ printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]);
+ return olpc_model_data + i;
+ }
+ }
+
+ /*
+ * ALPS creates new IDs pretty frequently; rather than listing them
+ * all, just assume they support the defaults. We've set aside the
+ * first entry of olpc_model_data as the catch-all.
+ */
+ if (!memcmp(param, olpc_model_data[0].signature, 2)) {
+ printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]);
+ return &olpc_model_data[0];
+ }
+
+ return NULL;
+}
+
+static int olpc_find_mode(struct psmouse *psmouse)
+{
+ struct olpc_data *priv = psmouse->private;
+ int mode = priv->i->flags;
+
+ if (mode & OLPC_GS)
+ mode = OLPC_GS;
+ else if (mode & OLPC_PT)
+ mode = OLPC_PT;
+ else
+ mode = -1;
+
+ return mode;
+}
+
+/*
+ * Touchpad should be disabled before calling this!
+ */
+static int olpc_new_mode(struct psmouse *psmouse, int mode)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ struct olpc_data *priv = psmouse->private;
+ unsigned char param;
+ int ret;
+
+ if (tpdebug)
+ printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies);
+
+ if ((ret = ps2_command(ps2dev, ¶m, 0x01F2)))
+ goto failed;
+ if ((ret = ps2_command(ps2dev, ¶m, 0x01F2)))
+ goto failed;
+ if ((ret = ps2_command(ps2dev, ¶m, 0x01F2)))
+ goto failed;
+
+ switch (mode) {
+ default:
+ printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode);
+ case OLPC_GS:
+ ret = ps2_command(ps2dev, NULL, 0xE6);
+ break;
+ case OLPC_PT:
+ ret = ps2_command(ps2dev, NULL, 0xE7);
+ break;
+ }
+ if (ret)
+ goto failed;
+
+ /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
+ psmouse->pktcnt = psmouse->out_of_sync = 0;
+ psmouse->last = jiffies;
+ psmouse->state = PSMOUSE_ACTIVATED;
+
+ if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)))
+ goto failed;
+
+ priv->current_mode = mode;
+ priv->pending_mode = 0;
+ if (tpdebug)
+ printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode);
+
+failed:
+ if (ret)
+ printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies);
+ return ret;
+}
+
+static int olpc_absolute_mode(struct psmouse *psmouse, int mode)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ /* Switch to 'Advanced mode.', four disables in a row. */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
+ return -1;
+
+ return olpc_new_mode(psmouse, mode);
+}
+
+/*
+ * olpc_poll() - poll the touchpad for current motion packet.
+ * Used in resync.
+ * Note: We can't poll, so always return failure.
+ */
+static int olpc_poll(struct psmouse *psmouse)
+{
+ return -1;
+}
+
+static int olpc_reconnect(struct psmouse *psmouse)
+{
+ struct olpc_data *priv = psmouse->private;
+ int mode;
+
+ if (olpc_rev_after(OLPC_REV_B2))
+ if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
+ return 0;
+
+ psmouse_reset(psmouse);
+
+ if (!(priv->i = olpc_get_model(psmouse)))
+ return -1;
+
+ mode = olpc_find_mode(psmouse);
+ if (mode < 0)
+ return -1;
+
+ if (olpc_absolute_mode(psmouse, mode)) {
+ printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void olpc_disconnect(struct psmouse *psmouse)
+{
+ struct olpc_data *priv = psmouse->private;
+
+ psmouse_reset(psmouse);
+ input_unregister_device(priv->dev2);
+ kfree(priv);
+}
+
+static void olpc_mode_switch(struct work_struct *w)
+{
+ struct delayed_work *work = container_of(w, struct delayed_work, work);
+ struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch);
+ struct psmouse *psmouse = priv->psmouse;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int pending_mode, ret;
+
+ if (priv->pending_mode == priv->current_mode) {
+ priv->pending_mode = 0;
+ printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n");
+ return;
+ }
+
+ if (tpdebug)
+ printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies);
+
+ /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
+ psmouse->state = PSMOUSE_INITIALIZING;
+
+ ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+ if (ret) {
+ /* XXX: if this ever fails, we need to do a full reset! */
+ printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies);
+ return;
+ }
+
+ /*
+ * ALPS tells us that it may take up to 20msec for the disable to
+ * take effect; however, ps2_command() will wait up to 200msec for
+ * the ACK to come back (and I'm assuming that by the time the
+ * hardware sends back its ACK, it has stopped sending bytes).
+ */
+ pending_mode = priv->pending_mode;
+
+ if (olpc_new_mode(psmouse, priv->pending_mode))
+ goto bad;
+
+ /*
+ * Deal with a potential race condition.
+ *
+ * If there is a brief tap of a stylus or a fingernail that
+ * triggers a mode switch to PT mode, and the stylus/fingernail is
+ * lifted after the DISABLE above, but before we reenable in the new mode,
+ * then we can get stuck in PT mode.
+ */
+ if (pending_mode == OLPC_PT) {
+ priv->pending_mode = OLPC_GS;
+ queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
+ }
+
+ return;
+
+bad:
+ printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n");
+ olpc_reconnect(psmouse);
+}
+
+int olpc_init(struct psmouse *psmouse)
+{
+ struct olpc_data *priv;
+ struct input_dev *dev = psmouse->dev;
+ struct input_dev *dev2;
+ int mode;
+
+ priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL);
+ dev2 = input_allocate_device();
+ if (!priv || !dev2)
+ goto init_fail;
+
+ psmouse->private = priv;
+ priv->dev2 = dev2;
+ priv->psmouse = psmouse;
+
+ psmouse_reset(psmouse);
+ if (!(priv->i = olpc_get_model(psmouse)))
+ goto init_fail;
+
+ mode = olpc_find_mode(psmouse);
+ if (mode < 0) {
+ printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n");
+ goto init_fail;
+ }
+
+ if (olpc_absolute_mode(psmouse, mode)) {
+ printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n");
+ goto init_fail;
+ }
+
+ /*
+ * Unset some of the default bits for things we don't have.
+ */
+ dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL);
+ dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y));
+ dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE);
+
+ dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+ dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
+ dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+
+ dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+ input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0);
+
+ snprintf(priv->phys, sizeof(priv->phys),
+ "%s/input1", psmouse->ps2dev.serio->phys);
+ dev2->phys = priv->phys;
+ dev2->name = "OLPC ALPS GlideSensor";
+ dev2->id.bustype = BUS_I8042;
+ dev2->id.vendor = 0x0002;
+ dev2->id.product = PSMOUSE_OLPC;
+ dev2->id.version = 0x0000;
+
+ dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+ dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
+ dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+
+ dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+ input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0);
+ input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0);
+ input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0);
+
+ if (input_register_device(dev2)) {
+ printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n");
+ goto init_fail;
+ }
+
+ psmouse->protocol_handler = olpc_process_byte;
+ psmouse->poll = olpc_poll;
+ psmouse->disconnect = olpc_disconnect;
+ psmouse->reconnect = olpc_reconnect;
+ psmouse->pktsize = 6;
+
+ /* Disable the idle resync. */
+ psmouse->resync_time = 0;
+ /* Reset after a lot of bad bytes. */
+ psmouse->resetafter = 1024;
+
+ INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch);
+
+ return 0;
+
+init_fail:
+ input_free_device(dev2);
+ kfree(priv);
+ return -1;
+}
+
+int olpc_detect(struct psmouse *psmouse, int set_properties)
+{
+ if (!olpc_get_model(psmouse))
+ return -1;
+
+ if (set_properties) {
+ psmouse->vendor = "ALPS";
+ psmouse->name = "PenTablet";
+ psmouse->model = 0;
+ }
+ return 0;
+}
+
--- /dev/null
+/*
+ * OLPC touchpad PS/2 mouse driver
+ *
+ * Copyright (c) 2006 One Laptop Per Child, inc.
+ *
+ * This driver is partly based on the ALPS driver.
+ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _OLPC_H
+#define _OLPC_H
+
+struct olpc_model_info {
+ unsigned char signature[3];
+ unsigned char flags;
+};
+
+struct olpc_data {
+ struct input_dev *dev2; /* Relative device */
+ struct psmouse *psmouse;
+ char name[32]; /* Name */
+ char phys[32]; /* Phys */
+ struct olpc_model_info *i; /* Info */
+ int pending_mode;
+ int current_mode;
+ s64 late;
+ struct delayed_work mode_switch;
+};
+
+#ifdef CONFIG_MOUSE_PS2_OLPC
+int olpc_detect(struct psmouse *psmouse, int set_properties);
+int olpc_init(struct psmouse *psmouse);
+#else
+inline int olpc_detect(struct psmouse *psmouse, int set_properties)
+{
+ return -ENOSYS;
+}
+inline int olpc_init(struct psmouse *psmouse)
+{
+ return -ENOSYS;
+}
+#endif
+
+#endif
--- /dev/null
+/* linux/drivers/mtd/mtdcore.h
+ *
+ * Header file for driver private mtdcore exports
+ *
+ */
+
+/* These are exported solely for the purpose of mtd_blkdevs.c. You
+ should not use them for _anything_ else */
+
+extern struct mutex mtd_table_mutex;
+extern struct mtd_info *mtd_table[MAX_MTD_DEVICES];
--- /dev/null
+/*
+ * MTD Oops/Panic logger
+ *
+ * Copyright (C) 2007 Nokia Corporation. All rights reserved.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/mtd/mtd.h>
+
+#define OOPS_PAGE_SIZE 4096
+
+static struct mtdoops_context {
+ int mtd_index;
+ struct work_struct work;
+ struct mtd_info *mtd;
+ int oops_pages;
+ int nextpage;
+ int nextcount;
+
+ void *oops_buf;
+ int ready;
+ int writecount;
+} oops_cxt;
+
+static void mtdoops_erase_callback(struct erase_info *done)
+{
+ wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+ wake_up(wait_q);
+}
+
+static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
+{
+ struct erase_info erase;
+ DECLARE_WAITQUEUE(wait, current);
+ wait_queue_head_t wait_q;
+ int ret;
+
+ init_waitqueue_head(&wait_q);
+ erase.mtd = mtd;
+ erase.callback = mtdoops_erase_callback;
+ erase.addr = offset;
+ if (mtd->erasesize < OOPS_PAGE_SIZE)
+ erase.len = OOPS_PAGE_SIZE;
+ else
+ erase.len = mtd->erasesize;
+ erase.priv = (u_long)&wait_q;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&wait_q, &wait);
+
+ ret = mtd->erase(mtd, &erase);
+ if (ret) {
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&wait_q, &wait);
+ printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] "
+ "on \"%s\" failed\n",
+ erase.addr, erase.len, mtd->name);
+ return ret;
+ }
+
+ schedule(); /* Wait for erase to finish. */
+ remove_wait_queue(&wait_q, &wait);
+
+ return 0;
+}
+
+static int mtdoops_inc_counter(struct mtdoops_context *cxt)
+{
+ struct mtd_info *mtd = cxt->mtd;
+ size_t retlen;
+ u32 count;
+ int ret;
+
+ cxt->nextpage++;
+ if (cxt->nextpage > cxt->oops_pages)
+ cxt->nextpage = 0;
+ cxt->nextcount++;
+ if (cxt->nextcount == 0xffffffff)
+ cxt->nextcount = 0;
+
+ ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
+ &retlen, (u_char *) &count);
+ if ((retlen != 4) || (ret < 0)) {
+ printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)"
+ ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
+ retlen, ret);
+ return 1;
+ }
+
+ /* See if we need to erase the next block */
+ if (count != 0xffffffff)
+ return 1;
+
+ printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
+ cxt->nextpage, cxt->nextcount);
+ cxt->ready = 1;
+ return 0;
+}
+
+static void mtdoops_prepare(struct mtdoops_context *cxt)
+{
+ struct mtd_info *mtd = cxt->mtd;
+ int i = 0, j, ret, mod;
+
+ /* We were unregistered */
+ if (!mtd)
+ return;
+
+ mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
+ if (mod != 0) {
+ cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
+ if (cxt->nextpage > cxt->oops_pages)
+ cxt->nextpage = 0;
+ }
+
+ while (mtd->block_isbad &&
+ mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) {
+badblock:
+ printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
+ cxt->nextpage * OOPS_PAGE_SIZE);
+ i++;
+ cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
+ if (cxt->nextpage > cxt->oops_pages)
+ cxt->nextpage = 0;
+ if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
+ printk(KERN_ERR "mtdoops: All blocks bad!\n");
+ return;
+ }
+ }
+
+ for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
+ ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+
+ if (ret < 0) {
+ if (mtd->block_markbad)
+ mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
+ goto badblock;
+ }
+
+ printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
+
+ cxt->ready = 1;
+}
+
+static void mtdoops_workfunc(struct work_struct *work)
+{
+ struct mtdoops_context *cxt =
+ container_of(work, struct mtdoops_context, work);
+
+ mtdoops_prepare(cxt);
+}
+
+static int find_next_position(struct mtdoops_context *cxt)
+{
+ struct mtd_info *mtd = cxt->mtd;
+ int page, maxpos = 0;
+ u32 count, maxcount = 0xffffffff;
+ size_t retlen;
+
+ for (page = 0; page < cxt->oops_pages; page++) {
+ mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
+ if (count == 0xffffffff)
+ continue;
+ if (maxcount == 0xffffffff) {
+ maxcount = count;
+ maxpos = page;
+ } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
+ maxcount = count;
+ maxpos = page;
+ } else if ((count > maxcount) && (count < 0xc0000000)) {
+ maxcount = count;
+ maxpos = page;
+ } else if ((count > maxcount) && (count > 0xc0000000)
+ && (maxcount > 0x80000000)) {
+ maxcount = count;
+ maxpos = page;
+ }
+ }
+ if (maxcount == 0xffffffff) {
+ cxt->nextpage = 0;
+ cxt->nextcount = 1;
+ cxt->ready = 1;
+ printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
+ cxt->nextpage, cxt->nextcount);
+ return 0;
+ }
+
+ cxt->nextpage = maxpos;
+ cxt->nextcount = maxcount;
+
+ return mtdoops_inc_counter(cxt);
+}
+
+
+static void mtdoops_notify_add(struct mtd_info *mtd)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+ int ret;
+
+ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
+ return;
+
+ if (mtd->size < (mtd->erasesize * 2)) {
+ printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
+ mtd->index);
+ return;
+ }
+
+ cxt->mtd = mtd;
+ cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE;
+
+ ret = find_next_position(cxt);
+ if (ret == 1)
+ mtdoops_prepare(cxt);
+
+ printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index);
+}
+
+static void mtdoops_notify_remove(struct mtd_info *mtd)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+
+ if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
+ return;
+
+ cxt->mtd = NULL;
+ flush_scheduled_work();
+}
+
+
+static void
+mtdoops_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct mtdoops_context *cxt = co->data;
+ struct mtd_info *mtd = cxt->mtd;
+ int i, ret;
+
+ if (!cxt->ready || !mtd)
+ return;
+
+ if (!oops_in_progress && cxt->writecount != 0) {
+ size_t retlen;
+ if (cxt->writecount < OOPS_PAGE_SIZE)
+ memset(cxt->oops_buf + cxt->writecount, 0xff,
+ OOPS_PAGE_SIZE - cxt->writecount);
+
+ ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
+ OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
+ cxt->ready = 0;
+ cxt->writecount = 0;
+
+ if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
+ printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d"
+ " written), err %d.\n",
+ cxt->nextpage * OOPS_PAGE_SIZE, retlen,
+ OOPS_PAGE_SIZE, ret);
+
+ ret = mtdoops_inc_counter(cxt);
+ if (ret == 1)
+ schedule_work(&cxt->work);
+ }
+
+ if (!oops_in_progress)
+ return;
+
+ if (cxt->writecount == 0) {
+ u32 *stamp = cxt->oops_buf;
+ *stamp = cxt->nextcount;
+ cxt->writecount = 4;
+ }
+
+ if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
+ count = OOPS_PAGE_SIZE - cxt->writecount;
+
+ for (i = 0; i < count; i++, s++)
+ *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s;
+
+ cxt->writecount = cxt->writecount + count;
+}
+
+static int __init mtdoops_console_setup(struct console *co, char *options)
+{
+ struct mtdoops_context *cxt = co->data;
+
+ if (cxt->mtd_index != -1)
+ return -EBUSY;
+ if (co->index == -1)
+ return -EINVAL;
+
+ cxt->mtd_index = co->index;
+ return 0;
+}
+
+static struct mtd_notifier mtdoops_notifier = {
+ .add = mtdoops_notify_add,
+ .remove = mtdoops_notify_remove,
+};
+
+static struct console mtdoops_console = {
+ .name = "ttyMTD",
+ .write = mtdoops_console_write,
+ .setup = mtdoops_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &oops_cxt,
+};
+
+static int __init mtdoops_console_init(void)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+
+ cxt->mtd_index = -1;
+ cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
+
+ if (!cxt->oops_buf) {
+ printk(KERN_ERR "Failed to allocate oops buffer workspace\n");
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&cxt->work, mtdoops_workfunc);
+
+ register_console(&mtdoops_console);
+ register_mtd_user(&mtdoops_notifier);
+ return 0;
+}
+
+static void __exit mtdoops_console_exit(void)
+{
+ struct mtdoops_context *cxt = &oops_cxt;
+
+ unregister_mtd_user(&mtdoops_notifier);
+ unregister_console(&mtdoops_console);
+ vfree(cxt->oops_buf);
+}
+
+
+subsys_initcall(mtdoops_console_init);
+module_exit(mtdoops_console_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
+MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver");
--- /dev/null
+/*
+ * linux/drivers/mtd/onenand/onenand_sim.c
+ *
+ * The OneNAND simulator
+ *
+ * Copyright © 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
+
+#include <linux/io.h>
+
+#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
+#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
+#endif
+#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
+#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
+#endif
+#ifndef CONFIG_ONENAND_SIM_VERSION_ID
+#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
+#endif
+
+static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
+static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
+static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
+
+struct onenand_flash {
+ void __iomem *base;
+ void __iomem *data;
+};
+
+#define ONENAND_CORE(flash) (flash->data)
+#define ONENAND_CORE_SPARE(flash, this, offset) \
+ ((flash->data) + (this->chipsize) + (offset >> 5))
+
+#define ONENAND_MAIN_AREA(this, offset) \
+ (this->base + ONENAND_DATARAM + offset)
+
+#define ONENAND_SPARE_AREA(this, offset) \
+ (this->base + ONENAND_SPARERAM + offset)
+
+#define ONENAND_GET_WP_STATUS(this) \
+ (readw(this->base + ONENAND_REG_WP_STATUS))
+
+#define ONENAND_SET_WP_STATUS(v, this) \
+ (writew(v, this->base + ONENAND_REG_WP_STATUS))
+
+/* It has all 0xff chars */
+#define MAX_ONENAND_PAGESIZE (2048 + 64)
+static unsigned char *ffchars;
+
+static struct mtd_partition os_partitions[] = {
+ {
+ .name = "OneNAND simulator partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/*
+ * OneNAND simulator mtd
+ */
+struct onenand_info {
+ struct mtd_info mtd;
+ struct mtd_partition *parts;
+ struct onenand_chip onenand;
+ struct onenand_flash flash;
+};
+
+struct onenand_info *info;
+
+#define DPRINTK(format, args...) \
+do { \
+ printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
+ __LINE__, ##args); \
+} while (0)
+
+/**
+ * onenand_lock_handle - Handle Lock scheme
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Send lock command to OneNAND device.
+ * The lock scheme is depends on chip type.
+ */
+static void onenand_lock_handle(struct onenand_chip *this, int cmd)
+{
+ int block_lock_scheme;
+ int status;
+
+ status = ONENAND_GET_WP_STATUS(this);
+ block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
+
+ switch (cmd) {
+ case ONENAND_CMD_UNLOCK:
+ if (block_lock_scheme)
+ ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
+ else
+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
+ break;
+
+ case ONENAND_CMD_LOCK:
+ if (block_lock_scheme)
+ ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
+ else
+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
+ break;
+
+ case ONENAND_CMD_LOCK_TIGHT:
+ if (block_lock_scheme)
+ ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
+ else
+ ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * onenand_bootram_handle - Handle BootRAM area
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
+ */
+static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
+{
+ switch (cmd) {
+ case ONENAND_CMD_READID:
+ writew(manuf_id, this->base);
+ writew(device_id, this->base + 2);
+ writew(version_id, this->base + 4);
+ break;
+
+ default:
+ /* REVIST: Handle other commands */
+ break;
+ }
+}
+
+/**
+ * onenand_update_interrupt - Set interrupt register
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Update interrupt register. The status is depends on command.
+ */
+static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
+{
+ int interrupt = ONENAND_INT_MASTER;
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ case ONENAND_CMD_READOOB:
+ interrupt |= ONENAND_INT_READ;
+ break;
+
+ case ONENAND_CMD_PROG:
+ case ONENAND_CMD_PROGOOB:
+ interrupt |= ONENAND_INT_WRITE;
+ break;
+
+ case ONENAND_CMD_ERASE:
+ interrupt |= ONENAND_INT_ERASE;
+ break;
+
+ case ONENAND_CMD_RESET:
+ interrupt |= ONENAND_INT_RESET;
+ break;
+
+ default:
+ break;
+ }
+
+ writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
+}
+
+/**
+ * onenand_check_overwrite - Check over-write if happend
+ * @param dest The destination pointer
+ * @param src The source pointer
+ * @param count The length to be check
+ * @return 0 on same, otherwise 1
+ *
+ * Compare the source with destination
+ */
+static int onenand_check_overwrite(void *dest, void *src, size_t count)
+{
+ unsigned int *s = (unsigned int *) src;
+ unsigned int *d = (unsigned int *) dest;
+ int i;
+
+ count >>= 2;
+ for (i = 0; i < count; i++)
+ if ((*s++ ^ *d++) != 0)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * onenand_data_handle - Handle OneNAND Core and DataRAM
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ * @param dataram Which dataram used
+ * @param offset The offset to OneNAND Core
+ *
+ * Copy data from OneNAND Core to DataRAM (read)
+ * Copy data from DataRAM to OneNAND Core (write)
+ * Erase the OneNAND Core (erase)
+ */
+static void onenand_data_handle(struct onenand_chip *this, int cmd,
+ int dataram, unsigned int offset)
+{
+ struct mtd_info *mtd = &info->mtd;
+ struct onenand_flash *flash = this->priv;
+ int main_offset, spare_offset;
+ void __iomem *src;
+ void __iomem *dest;
+ unsigned int i;
+
+ if (dataram) {
+ main_offset = mtd->writesize;
+ spare_offset = mtd->oobsize;
+ } else {
+ main_offset = 0;
+ spare_offset = 0;
+ }
+
+ switch (cmd) {
+ case ONENAND_CMD_READ:
+ src = ONENAND_CORE(flash) + offset;
+ dest = ONENAND_MAIN_AREA(this, main_offset);
+ memcpy(dest, src, mtd->writesize);
+ /* Fall through */
+
+ case ONENAND_CMD_READOOB:
+ src = ONENAND_CORE_SPARE(flash, this, offset);
+ dest = ONENAND_SPARE_AREA(this, spare_offset);
+ memcpy(dest, src, mtd->oobsize);
+ break;
+
+ case ONENAND_CMD_PROG:
+ src = ONENAND_MAIN_AREA(this, main_offset);
+ dest = ONENAND_CORE(flash) + offset;
+ /* To handle partial write */
+ for (i = 0; i < (1 << mtd->subpage_sft); i++) {
+ int off = i * this->subpagesize;
+ if (!memcmp(src + off, ffchars, this->subpagesize))
+ continue;
+ if (memcmp(dest + off, ffchars, this->subpagesize) &&
+ onenand_check_overwrite(dest + off, src + off, this->subpagesize))
+ printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
+ memcpy(dest + off, src + off, this->subpagesize);
+ }
+ /* Fall through */
+
+ case ONENAND_CMD_PROGOOB:
+ src = ONENAND_SPARE_AREA(this, spare_offset);
+ /* Check all data is 0xff chars */
+ if (!memcmp(src, ffchars, mtd->oobsize))
+ break;
+
+ dest = ONENAND_CORE_SPARE(flash, this, offset);
+ if (memcmp(dest, ffchars, mtd->oobsize) &&
+ onenand_check_overwrite(dest, src, mtd->oobsize))
+ printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
+ offset);
+ memcpy(dest, src, mtd->oobsize);
+ break;
+
+ case ONENAND_CMD_ERASE:
+ memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
+ memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
+ (mtd->erasesize >> 5));
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * onenand_command_handle - Handle command
+ * @param this OneNAND device structure
+ * @param cmd The command to be sent
+ *
+ * Emulate OneNAND command.
+ */
+static void onenand_command_handle(struct onenand_chip *this, int cmd)
+{
+ unsigned long offset = 0;
+ int block = -1, page = -1, bufferram = -1;
+ int dataram = 0;
+
+ switch (cmd) {
+ case ONENAND_CMD_UNLOCK:
+ case ONENAND_CMD_LOCK:
+ case ONENAND_CMD_LOCK_TIGHT:
+ case ONENAND_CMD_UNLOCK_ALL:
+ onenand_lock_handle(this, cmd);
+ break;
+
+ case ONENAND_CMD_BUFFERRAM:
+ /* Do nothing */
+ return;
+
+ default:
+ block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
+ if (block & (1 << ONENAND_DDP_SHIFT)) {
+ block &= ~(1 << ONENAND_DDP_SHIFT);
+ /* The half of chip block */
+ block += this->chipsize >> (this->erase_shift + 1);
+ }
+ if (cmd == ONENAND_CMD_ERASE)
+ break;
+
+ page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
+ page = (page >> ONENAND_FPA_SHIFT);
+ bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
+ bufferram >>= ONENAND_BSA_SHIFT;
+ bufferram &= ONENAND_BSA_DATARAM1;
+ dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
+ break;
+ }
+
+ if (block != -1)
+ offset += block << this->erase_shift;
+
+ if (page != -1)
+ offset += page << this->page_shift;
+
+ onenand_data_handle(this, cmd, dataram, offset);
+
+ onenand_update_interrupt(this, cmd);
+}
+
+/**
+ * onenand_writew - [OneNAND Interface] Emulate write operation
+ * @param value value to write
+ * @param addr address to write
+ *
+ * Write OneNAND register with value
+ */
+static void onenand_writew(unsigned short value, void __iomem * addr)
+{
+ struct onenand_chip *this = info->mtd.priv;
+
+ /* BootRAM handling */
+ if (addr < this->base + ONENAND_DATARAM) {
+ onenand_bootram_handle(this, value);
+ return;
+ }
+ /* Command handling */
+ if (addr == this->base + ONENAND_REG_COMMAND)
+ onenand_command_handle(this, value);
+
+ writew(value, addr);
+}
+
+/**
+ * flash_init - Initialize OneNAND simulator
+ * @param flash OneNAND simulaotr data strucutres
+ *
+ * Initialize OneNAND simulator.
+ */
+static int __init flash_init(struct onenand_flash *flash)
+{
+ int density, size;
+ int buffer_size;
+
+ flash->base = kzalloc(131072, GFP_KERNEL);
+ if (!flash->base) {
+ printk(KERN_ERR "Unable to allocate base address.\n");
+ return -ENOMEM;
+ }
+
+ density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ size = ((16 << 20) << density);
+
+ ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
+ if (!ONENAND_CORE(flash)) {
+ printk(KERN_ERR "Unable to allocate nand core address.\n");
+ kfree(flash->base);
+ return -ENOMEM;
+ }
+
+ memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
+
+ /* Setup registers */
+ writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
+ writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
+ writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
+
+ if (density < 2)
+ buffer_size = 0x0400; /* 1KiB page */
+ else
+ buffer_size = 0x0800; /* 2KiB page */
+ writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
+
+ return 0;
+}
+
+/**
+ * flash_exit - Clean up OneNAND simulator
+ * @param flash OneNAND simulaotr data strucutres
+ *
+ * Clean up OneNAND simulator.
+ */
+static void flash_exit(struct onenand_flash *flash)
+{
+ vfree(ONENAND_CORE(flash));
+ kfree(flash->base);
+ kfree(flash);
+}
+
+static int __init onenand_sim_init(void)
+{
+ /* Allocate all 0xff chars pointer */
+ ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
+ if (!ffchars) {
+ printk(KERN_ERR "Unable to allocate ff chars.\n");
+ return -ENOMEM;
+ }
+ memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
+
+ /* Allocate OneNAND simulator mtd pointer */
+ info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
+ if (!info) {
+ printk(KERN_ERR "Unable to allocate core structures.\n");
+ kfree(ffchars);
+ return -ENOMEM;
+ }
+
+ /* Override write_word function */
+ info->onenand.write_word = onenand_writew;
+
+ if (flash_init(&info->flash)) {
+ printk(KERN_ERR "Unable to allocat flash.\n");
+ kfree(ffchars);
+ kfree(info);
+ return -ENOMEM;
+ }
+
+ info->parts = os_partitions;
+
+ info->onenand.base = info->flash.base;
+ info->onenand.priv = &info->flash;
+
+ info->mtd.name = "OneNAND simulator";
+ info->mtd.priv = &info->onenand;
+ info->mtd.owner = THIS_MODULE;
+
+ if (onenand_scan(&info->mtd, 1)) {
+ flash_exit(&info->flash);
+ kfree(ffchars);
+ kfree(info);
+ return -ENXIO;
+ }
+
+ add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
+
+ return 0;
+}
+
+static void __exit onenand_sim_exit(void)
+{
+ struct onenand_chip *this = info->mtd.priv;
+ struct onenand_flash *flash = this->priv;
+
+ onenand_release(&info->mtd);
+ flash_exit(flash);
+ kfree(ffchars);
+ kfree(info);
+}
+
+module_init(onenand_sim_init);
+module_exit(onenand_sim_exit);
+
+MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
+MODULE_DESCRIPTION("The OneNAND flash simulator");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* This header file defines the registers and suspend/resume
+ structures for the Geode GX and LX. The lxfb driver defines
+ _GEODELX_ before including this file, which will unlock the
+ extra registers that are only valid for LX.
+*/
+
+#ifndef _GEODE_REGS_H_
+#define _GEODE_REGS_H_
+
+/* MSRs */
+
+#define GX_VP_MSR_PAD_SELECT 0xC0002011
+#define LX_VP_MSR_PAD_SELECT 0x48000011
+
+#define GEODE_MSR_GLCP_DOTPLL 0x4c000015
+
+#define GLCP_DOTPLL_RESET (1 << 0)
+#define GLCP_DOTPLL_BYPASS (1 << 15)
+#define GLCP_DOTPLL_HALFPIX (1 << 24)
+#define GLCP_DOTPLL_LOCK (1 << 25)
+
+/* Registers */
+#define VP_FP_START 0x400
+
+
+#ifdef _GEODELX_
+
+#define GP_REG_SIZE 0x7C
+#define DC_REG_SIZE 0xF0
+#define VP_REG_SIZE 0x158
+#define FP_REG_SIZE 0x70
+
+#else
+
+#define GP_REG_SIZE 0x50
+#define DC_REG_SIZE 0x90
+#define VP_REG_SIZE 0x138
+#define FP_REG_SIZE 0x70
+
+#endif
+
+#define DC_PAL_SIZE 0x105
+
+struct geoderegs {
+
+ struct {
+ u64 padsel;
+ u64 dotpll;
+
+#ifdef _GEODELX_
+ u64 dfglcfg;
+ u64 dcspare;
+#else
+ u64 rstpll;
+#endif
+ } msr;
+
+ union {
+ unsigned char b[GP_REG_SIZE];
+ struct {
+ u32 dst_offset; /* 0x00 */
+ u32 src_offset; /* 0x04 */
+ u32 stride; /* 0x08 */
+ u32 wid_height; /* 0x0C */
+ u32 src_color_fg; /* 0x10 */
+ u32 src_color_bg; /* 0x14 */
+ u32 pat_color_0; /* 0x18 */
+ u32 pat_color_1; /* 0x1C */
+ u32 pat_color_2; /* 0x20 */
+ u32 pat_color_3; /* 0x24 */
+ u32 pat_color_4; /* 0x28 */
+ u32 pat_color_5; /* 0x2C */
+ u32 pat_data_0; /* 0x30 */
+ u32 pat_data_1; /* 0x34 */
+ u32 raster_mode; /* 0x38 */
+ u32 vector_mode; /* 0x3C */
+ u32 blt_mode; /* 0x40 */
+ u32 blit_status; /* 0x4C */
+ u32 hst_src; /* 0x48 */
+ u32 base_offset; /* 0x4C */
+
+#ifdef _GEODELX_
+ u32 cmd_top; /* 0x50 */
+ u32 cmd_bot; /* 0x54 */
+ u32 cmd_read; /* 0x58 */
+ u32 cmd_write; /* 0x5C */
+ u32 ch3_offset; /* 0x60 */
+ u32 ch3_mode_str; /* 0x64 */
+ u32 ch3_width; /* 0x68 */
+ u32 ch3_hsrc; /* 0x6C */
+ u32 lut_index; /* 0x70 */
+ u32 lut_data; /* 0x74 */
+ u32 int_cntrl; /* 0x78 */
+#endif
+ } r;
+ } gp;
+
+ union {
+ unsigned char b[DC_REG_SIZE];
+
+ struct {
+ u32 unlock; /* 0x00 */
+ u32 gcfg; /* 0x04 */
+ u32 dcfg; /* 0x08 */
+ u32 arb; /* 0x0C */
+ u32 fb_st_offset; /* 0x10 */
+ u32 cb_st_offset; /* 0x14 */
+ u32 curs_st_offset; /* 0x18 */
+ u32 icon_st_offset; /* 0x1C */
+ u32 vid_y_st_offset; /* 0x20 */
+ u32 vid_u_st_offset; /* 0x24 */
+ u32 vid_v_st_offset; /* 0x28 */
+ u32 dctop; /* 0x2c */
+ u32 line_size; /* 0x30 */
+ u32 gfx_pitch; /* 0x34 */
+ u32 vid_yuv_pitch; /* 0x38 */
+ u32 rsvd2; /* 0x3C */
+ u32 h_active_timing; /* 0x40 */
+ u32 h_blank_timing; /* 0x44 */
+ u32 h_sync_timing; /* 0x48 */
+ u32 rsvd3; /* 0x4C */
+ u32 v_active_timing; /* 0x50 */
+ u32 v_blank_timing; /* 0x54 */
+ u32 v_sync_timing; /* 0x58 */
+ u32 fbactive; /* 0x5C */
+ u32 dc_cursor_x; /* 0x60 */
+ u32 dc_cursor_y; /* 0x64 */
+ u32 dc_icon_x; /* 0x68 */
+ u32 dc_line_cnt; /* 0x6C */
+ u32 rsvd5; /* 0x70 - palette address */
+ u32 rsvd6; /* 0x74 - palette data */
+ u32 dfifo_diag; /* 0x78 */
+ u32 cfifo_diag; /* 0x7C */
+ u32 dc_vid_ds_delta; /* 0x80 */
+ u32 gliu0_mem_offset; /* 0x84 */
+ u32 dv_ctl; /* 0x88 - added by LX */
+ u32 dv_acc; /* 0x8C */
+
+#ifdef _GEODELX_
+ u32 gfx_scale;
+ u32 irq_filt_ctl;
+ u32 filt_coeff1;
+ u32 filt_coeff2;
+ u32 vbi_event_ctl;
+ u32 vbi_odd_ctl;
+ u32 vbi_hor;
+ u32 vbi_ln_odd;
+ u32 vbi_ln_event;
+ u32 vbi_pitch;
+ u32 clr_key;
+ u32 clr_key_mask;
+ u32 clr_key_x;
+ u32 clr_key_y;
+ u32 irq;
+ u32 rsvd8;
+ u32 genlk_ctrl;
+ u32 vid_even_y_st_offset; /* 0xD8 */
+ u32 vid_even_u_st_offset; /* 0xDC */
+ u32 vid_even_v_st_offset; /* 0xE0 */
+ u32 v_active_even_timing; /* 0xE4 */
+ u32 v_blank_even_timing; /* 0xE8 */
+ u32 v_sync_even_timing; /* 0xEC */
+#endif
+ } r;
+ } dc;
+
+ union {
+ unsigned char b[VP_REG_SIZE];
+
+ struct {
+ u64 vcfg; /* 0x00 */
+ u64 dcfg; /* 0x08 */
+ u64 vx; /* 0x10 */
+ u64 vy; /* 0x18 */
+ u64 vs; /* 0x20 */
+ u64 vck; /* 0x28 */
+ u64 vcm; /* 0x30 */
+ u64 rsvd1; /* 0x38 - Gamma address*/
+ u64 rsvd2; /* 0x40 - Gamma data*/
+ u64 rsvd3; /* 0x48 */
+ u64 misc; /* 0x50 */
+ u64 ccs; /* 0x58 */
+ u64 rsvd4[3]; /* 0x60-0x70 */
+ u64 vdc; /* 0x78 */
+ u64 vco; /* 0x80 */
+ u64 crc; /* 0x88 */
+ u64 crc32; /* 0x90 */
+ u64 vde; /* 0x98 */
+ u64 cck; /* 0xA0 */
+ u64 ccm; /* 0xA8 */
+ u64 cc1; /* 0xB0 */
+ u64 cc2; /* 0xB8 */
+ u64 a1x; /* 0xC0 */
+ u64 a1y; /* 0xC8 */
+ u64 a1c; /* 0xD0 */
+ u64 a1t; /* 0xD8 */
+ u64 a2x; /* 0xE0 */
+ u64 a2y; /* 0xE8 */
+ u64 a2c; /* 0xF0 */
+ u64 a2t; /* 0xF8 */
+ u64 a3x; /* 0x100 */
+ u64 a3y; /* 0x108 */
+ u64 a3c; /* 0x110 */
+ u64 a3t; /* 0x118 */
+ u64 vrr; /* 0x120 */
+ u64 awt; /* 0x128 */
+ u64 vtm; /* 0x130 */
+#ifdef _GEODELX_
+ u64 vye; /* 0x138 */
+ u64 a1ye; /* 0x140 */
+ u32 a2ye; /* 0x148 */
+ u32 a3ye; /* 0x150 */
+#endif
+ } r;
+ } vp;
+
+ union {
+ unsigned char b[FP_REG_SIZE];
+
+ struct {
+ u64 pt1; /* 0x400 */
+ u64 pt2; /* 0x408 */
+ u64 pm; /* 0x410 */
+ u64 dfc; /* 0x418 */
+ u64 blfsr; /* 0x420 */
+ u64 rlfsr; /* 0x428 */
+ u64 fmi; /* 0x430 */
+ u64 fmd; /* 0x438 */
+ u64 rsvd; /* 0x440 */
+ u64 dca; /* 0x448 */
+ u64 dmd; /* 0x450 */
+ u64 crc; /* 0x458 */
+ u64 fbb; /* 0x460 */
+ u64 crc32; /* 0x468 */
+ } r;
+ } fp;
+
+ u32 pal[DC_PAL_SIZE];
+ u32 gamma[256];
+};
+
+#endif
--- /dev/null
+#include <linux/fb.h>
+#include <asm/io.h>
+#include <asm/msr.h>
+
+#include "geodefb.h"
+#include "video_gx.h"
+
+void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
+{
+ int timeout = 1000;
+
+ u64 rstpll, dotpll;
+
+ rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+ dotpll &= 0x00000000ffffffffull;
+ dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
+
+ dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
+ dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
+
+ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+ rstpll |= (regs->msr.rstpll &
+ ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 |
+ MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
+ MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
+
+ wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
+ dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
+ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+ do {
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
+}
+
+/* FIXME: Make sure nothing is read to clear */
+
+void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
+{
+ struct geodefb_par *par = info->par;
+ int i;
+
+ /* Wait for the BLT engine to stop being busy */
+ while(readl(par->gp_regs + 0x44) & 0x05);
+
+ rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
+ rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
+ rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
+
+ writel(0x4758, par->dc_regs + 0x00);
+
+ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
+ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
+ memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
+ memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
+
+ /* Save the palettes */
+ writel(0, par->dc_regs + 0x70);
+
+ for(i = 0; i < DC_PAL_SIZE; i++)
+ regs->pal[i] = readl(par->dc_regs + 0x74);
+
+ writel(0, par->vid_regs + 0x38);
+
+ for(i = 0; i < 0xFF; i++)
+ regs->gamma[i] = readl(par->vid_regs + 0x40);
+}
+
+void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
+{
+ struct geodefb_par *par = info->par;
+ u32 val, i;
+
+ /* DOTPLL */
+ gx_set_dotpll(info, regs);
+
+ /* GP */
+
+ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
+ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
+ writel(regs->gp.r.stride, par->gp_regs + 0x08);
+ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
+ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
+ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
+ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
+ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
+ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
+ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
+ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
+ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
+ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
+ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
+
+ /* Don't write the raster / vector / blt mode regs */
+ /* status register is read only */
+
+ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
+ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
+
+ /* DC */
+
+ /* Write the unlock value */
+ writel(0x4758, par->dc_regs + 0x00);
+
+ writel(0, par->dc_regs + 0x70);
+
+ for(i = 0; i < DC_PAL_SIZE; i++)
+ writel(regs->pal[i], par->dc_regs + 0x74);
+
+ /* Write the gcfg register without the enables */
+ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
+
+ /* Write the vcfg register without the enables */
+ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
+
+ /* Write the rest of the active registers */
+
+ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
+ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
+ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
+ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
+ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
+ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
+ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
+ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
+ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
+ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
+ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
+ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
+ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
+ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
+ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
+ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
+ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
+ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
+ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
+
+ /* Don't write the line_cnt or diag registers */
+
+ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
+ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
+ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
+
+ /* VP */
+
+ /* MSR */
+ wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
+
+ writel(0, par->vid_regs + 0x38);
+
+ for(i = 0; i < 0xFF; i++)
+ writel((u32) regs->gamma[i], par->vid_regs + 0x40);
+
+ /* Don't enable video yet */
+ writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
+
+ /* Don't enable the CRT yet */
+ writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
+
+ /* Write the rest of the VP registers */
+
+ writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
+ writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
+ writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
+ writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
+ writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
+ writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
+ writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
+ writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
+ writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
+ writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
+ writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
+ writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
+ writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
+ writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
+ writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
+ writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
+ writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
+ writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
+ writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
+ writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
+ writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
+ writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
+ writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
+ writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
+ writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
+ writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
+ writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
+ writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
+
+
+ /* FP registers */
+
+ writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
+ writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
+
+ writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
+ writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
+ writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
+ writel(regs->fp.r.fmi, par->vid_regs + 0x430);
+ writel(regs->fp.r.fmd, par->vid_regs + 0x438);
+ writel(regs->fp.r.dca, par->vid_regs + 0x448);
+ writel(regs->fp.r.dmd, par->vid_regs + 0x450);
+ writel(regs->fp.r.crc, par->vid_regs + 0x458);
+ writel(regs->fp.r.fbb, par->vid_regs + 0x460);
+
+ /* Final enables */
+
+ val = readl(par->vid_regs + 0x410);
+
+ /* Control the panel */
+ if (regs->fp.r.pm & (1 << 24)) {
+
+ if (!(val & 0x09))
+ writel(regs->fp.r.pm, par->vid_regs + 0x410);
+ }
+ else {
+ if (!(val & 0x05))
+ writel(regs->fp.r.pm, par->vid_regs + 0x410);
+ }
+
+ /* Turn everything on */
+
+ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
+ writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
+ writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
+ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
+}
+
+
+#ifdef DEBUG
+
+void dump_regs(struct fb_info *info, int mode) {
+
+ struct geodefb_par *par = info->par;
+ u32 val;
+ int i;
+
+ if (mode == 0) {
+ for(i = 0; i < GP_REG_SIZE; i += 4) {
+ val = readl(par->gp_regs + i);
+ }
+ }
+
+ if (mode == 1) {
+ writel(0x4758, par->dc_regs + 0x00);
+
+ for(i = 0; i < DC_REG_SIZE; i += 4) {
+ val = readl(par->dc_regs + i);
+ printk("DC%x: %x\n", i, val);
+ }
+ }
+
+ if (mode == 2) {
+ for(i = 0; i < VP_REG_SIZE; i += 8) {
+ val = readl(par->vid_regs + i);
+ printk("VP%x: %x\n", i, val);
+ }
+ }
+
+ if (mode == 3) {
+ for(i = 0; i < FP_REG_SIZE; i += 8) {
+ val = readl(par->vid_regs + 0x400 + i);
+ printk("FP%x: %x\n", i, val);
+ }
+ }
+}
+
+#endif
--- /dev/null
+/*
+ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
+ *
+ * Copyright © 2006-2007 Red Hat, Inc.
+ * Copyright © 2006-2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software. You can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-id.h>
+#include <linux/pci.h>
+#include <linux/vt_kern.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/backlight.h>
+#include <linux/device.h>
+#include <asm/uaccess.h>
+#include <linux/ctype.h>
+#include <linux/reboot.h>
+#include <asm/tsc.h>
+#include <asm/olpc.h>
+
+#include "olpc_dcon.h"
+
+/* Module definitions */
+
+static int resumeline = 898;
+module_param(resumeline, int, 0444);
+
+static int noinit;
+module_param(noinit, int, 0444);
+
+/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
+static int useaa = 1;
+module_param(useaa, int, 0444);
+
+/* I2C structures */
+
+static struct i2c_driver dcon_driver;
+static struct i2c_client *dcon_client;
+
+/* Platform devices */
+static struct platform_device *dcon_device;
+
+/* Backlight device */
+static struct backlight_device *dcon_bl_dev;
+
+/* Base address of the GPIO registers */
+static unsigned long gpio_base;
+
+static struct fb_info *fbinfo;
+
+/* Current source, initialized at probe time */
+static int dcon_source;
+
+/* Desired source */
+static int dcon_pending;
+
+/* Current output type */
+static int dcon_output = DCON_OUTPUT_COLOR;
+
+/* Current sleep status (not yet implemented) */
+static int dcon_sleep_val = DCON_ACTIVE;
+
+/* Shadow register for the DCON_REG_MODE register */
+static unsigned short dcon_disp_mode;
+
+/* Variables used during switches */
+static int dcon_switched;
+
+static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
+
+static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
+I2C_CLIENT_INSMOD;
+
+#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
+#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
+
+/* The current backlight value - this saves us some smbus traffic */
+static int bl_val = -1;
+
+/* ===== API functions - these are called by a variety of users ==== */
+
+/* Backlight notes - turning off the backlight enable bit in the DCON
+ * doesn't save us any power over just pushing the BL to zero, so we
+ * don't use that bit in this code.
+ */
+
+static int dcon_get_backlight(void)
+{
+ if (dcon_client == NULL)
+ return 0;
+
+ if (bl_val == -1)
+ bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
+
+ return bl_val;
+}
+
+static void dcon_set_backlight(int level)
+{
+ if (dcon_client == NULL)
+ return;
+
+ if (bl_val == (level & 0x0F))
+ return;
+
+ bl_val = level & 0x0F;
+ dcon_write(DCON_REG_BRIGHT, bl_val);
+
+ /* Purposely turn off the backlight when we go to level 0 */
+
+ if (bl_val == 0) {
+ dcon_disp_mode &= ~MODE_BL_ENABLE;
+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
+ }
+ else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
+ dcon_disp_mode |= MODE_BL_ENABLE;
+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
+ }
+}
+
+/* Set the output type to either color or mono */
+
+static int dcon_set_output(int arg)
+{
+ if (dcon_output == arg)
+ return 0;
+
+ dcon_output = arg;
+
+ if (arg == DCON_OUTPUT_MONO) {
+ dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
+ dcon_disp_mode |= MODE_MONO_LUMA;
+ }
+ else {
+ dcon_disp_mode &= ~(MODE_MONO_LUMA);
+ dcon_disp_mode |= MODE_CSWIZZLE;
+ if (useaa)
+ dcon_disp_mode |= MODE_COL_AA;
+ }
+
+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
+ return 0;
+}
+
+/* For now, this will be really stupid - we need to address how
+ * DCONLOAD works in a sleep and account for it accordingly
+ */
+
+static void dcon_sleep(int state)
+{
+ /* Turn off the backlight and put the DCON to sleep */
+
+ if (state == dcon_sleep_val)
+ return;
+
+ if (state == DCON_SLEEP) {
+ dcon_disp_mode &= ~MODE_BL_ENABLE;
+ dcon_disp_mode |= MODE_SLEEP;
+ }
+ else {
+ /* Only re-enable the backlight if the backlight value is set */
+
+ if (bl_val != 0)
+ dcon_disp_mode |= MODE_BL_ENABLE;
+
+ dcon_disp_mode &= ~MODE_SLEEP;
+ }
+
+ dcon_sleep_val = state;
+ dcon_write(DCON_REG_MODE, dcon_disp_mode);
+
+ /* We should turn off some stuff in the framebuffer - but what? */
+}
+
+/* Set the source of the display (CPU or DCON) */
+
+static void dcon_source_switch(struct work_struct *work)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int source = dcon_pending;
+
+ if (dcon_source == source)
+ return;
+
+ dcon_switched = 0;
+
+ switch (source) {
+ case DCON_SOURCE_CPU:
+
+ /* Enable the scanline interrupt bit */
+ if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
+ printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n");
+ else {
+ /* Wait up to one second for the scanline interrupt */
+ wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
+ }
+
+ if (!dcon_switched)
+ printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n");
+
+ /*
+ * Ideally we'd like to disable interrupts here so that the
+ * fb_powerup and DCON turn on happen at a known time value;
+ * however, we can't do that right now with fb_set_suspend
+ * messing with semaphores.
+ *
+ * For now, we just hope..
+ */
+ if (fb_powerup(fbinfo)) {
+ printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n");
+ dcon_pending = DCON_SOURCE_DCON;
+ return;
+ }
+
+ /* And turn off the DCON */
+ outl(1<<11, gpio_base + GPIOx_OUT_VAL);
+
+ /* Turn off the scanline interrupt */
+ if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
+ printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n");
+
+ printk(KERN_INFO "olpc-dcon: The CPU has control\n");
+ break;
+ case DCON_SOURCE_DCON:
+ {
+ int t;
+
+ add_wait_queue(&dcon_wait_queue, &wait);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+
+ /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
+ control */
+
+ outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
+
+ t = schedule_timeout(HZ/2);
+ remove_wait_queue(&dcon_wait_queue, &wait);
+ set_current_state(TASK_RUNNING);
+
+ if (!dcon_switched)
+ printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
+
+ /* Turn off the graphics engine completely */
+ fb_powerdown(fbinfo);
+
+ printk(KERN_INFO "olpc-dcon: The DCON has control\n");
+ break;
+ }
+ default:
+ BUG();
+ }
+
+ dcon_source = source;
+}
+
+static DECLARE_WORK(dcon_work, dcon_source_switch);
+
+static int dcon_set_source(int arg)
+{
+ if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
+ return -EINVAL;
+
+ if (dcon_pending == arg)
+ return 0;
+
+ dcon_pending = arg;
+ if ((dcon_source != arg) && !work_pending(&dcon_work))
+ schedule_work(&dcon_work);
+
+ return 0;
+}
+
+static int dcon_set_source_sync(int arg)
+{
+ int ret = dcon_set_source(arg);
+ if (!ret)
+ flush_scheduled_work();
+ return ret;
+}
+
+static int dconbl_set(struct backlight_device *dev) {
+
+ int level = dev->props.brightness;
+
+ if (dev->props.power != FB_BLANK_UNBLANK)
+ level = 0;
+
+ dcon_set_backlight(level);
+ return 0;
+}
+
+static int dconbl_get(struct backlight_device *dev) {
+ return dcon_get_backlight();
+}
+
+static ssize_t dcon_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%4.4X\n", dcon_disp_mode);
+}
+
+static ssize_t dcon_sleep_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dcon_sleep_val);
+}
+
+static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
+ return sprintf(buf, "%d\n", dcon_source);
+}
+
+static ssize_t dcon_freeze_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
+}
+
+static ssize_t dcon_output_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", dcon_output);
+}
+
+static ssize_t dcon_resumeline_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", resumeline);
+}
+
+static int _strtoul(const char *buf, int len, unsigned int *val)
+{
+
+ char *endp;
+ unsigned int output = simple_strtoul(buf, &endp, 0);
+ int size = endp - buf;
+
+ if (*endp && isspace(*endp))
+ size++;
+
+ if (size != len)
+ return -EINVAL;
+
+ *val = output;
+ return 0;
+}
+
+static ssize_t dcon_output_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int output;
+ int rc = -EINVAL;
+
+ if (_strtoul(buf, count, &output))
+ return -EINVAL;
+
+ if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
+ dcon_set_output(output);
+ rc = count;
+ }
+
+ return rc;
+}
+
+static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int output;
+ int rc = -EINVAL;
+
+ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
+ if (_strtoul(buf, count, &output))
+ return -EINVAL;
+
+ dcon_set_source(output);
+ rc = count;
+
+ return rc;
+}
+
+static ssize_t dcon_freeze_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int output;
+ int rc = -EINVAL;
+
+ if (_strtoul(buf, count, &output))
+ return rc;
+
+ dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
+ rc = count;
+
+ return rc;
+}
+
+static ssize_t dcon_resumeline_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int rl;
+ int rc = -EINVAL;
+
+ if (_strtoul(buf, count, &rl))
+ return rc;
+
+ resumeline = rl;
+ dcon_write(DCON_REG_SCAN_INT, resumeline);
+ rc = count;
+
+ return rc;
+}
+
+static ssize_t dcon_sleep_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int output;
+
+ if (_strtoul(buf, count, &output))
+ return -EINVAL;
+
+ dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
+ return count;
+}
+
+static struct device_attribute dcon_device_files[] = {
+ __ATTR(mode, 0444, dcon_mode_show, NULL),
+ __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
+ __ATTR(source, 0644, dcon_source_show, dcon_source_store),
+ __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
+ __ATTR(output, 0644, dcon_output_show, dcon_output_store),
+ __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
+};
+
+static struct backlight_ops dcon_bl_ops = {
+ .get_brightness = dconbl_get,
+ .update_status = dconbl_set
+};
+
+/* List of GPIOs that we care about:
+ (in) GPIO12 -- DCONBLNK
+ (in) GPIO[56] -- DCONSTAT[01]
+ (out) GPIO11 -- DCONLOAD
+*/
+
+#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
+#define OUT_GPIOS (1<<11)
+
+static irqreturn_t dcon_interrupt(int, void *);
+
+static int dcon_request_irq(void)
+{
+ unsigned long lo, hi;
+ unsigned char lob;
+
+ rdmsr(MSR_LBAR_GPIO, lo, hi);
+
+ /* Check the mask and whether GPIO is enabled (sanity check) */
+ if (hi != 0x0000f001) {
+ printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
+ return -ENODEV;
+ }
+
+ /* Mask off the IO base address */
+ gpio_base = lo & 0x0000ff00;
+
+ /* Turn off the event enable for GPIO7 just to be safe */
+ outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
+
+ /* Set the directions for the GPIO pins */
+ outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
+ outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
+
+ /* Set up the interrupt mappings */
+
+ /* Set the IRQ to pair 2 */
+ geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
+
+ /* Enable group 2 to trigger the DCON interrupt */
+ geode_gpio_set_irq(2, DCON_IRQ);
+
+ /* Select edge level for interrupt (in PIC) */
+
+ lob = inb(0x4d0);
+ lob &= ~(1 << DCON_IRQ);
+ outb(lob, 0x4d0);
+
+ /* Register the interupt handler */
+ if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
+ return -EIO;
+
+ /* Clear INV_EN for GPIO7 (DCONIRQ) */
+ outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
+
+ /* Enable filter for GPIO12 (DCONBLANK) */
+ outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
+
+ /* Disable filter for GPIO7 */
+ outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
+
+ /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
+
+ outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
+ outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
+
+ /* Add GPIO12 to the Filter Event Pair #7 */
+ outb(12, gpio_base + GPIO_FE7_SEL);
+
+ /* Turn off negative Edge Enable for GPIO12 */
+ outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
+
+ /* Enable negative Edge Enable for GPIO7 */
+ outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
+
+ /* Zero the filter amount for Filter Event Pair #7 */
+ outw(0, gpio_base + GPIO_FLT7_AMNT);
+
+ /* Clear the negative edge status for GPIO7 and GPIO12 */
+ outl((1<<7) | (1<<12), gpio_base+0x4c);
+
+ /* FIXME: Clear the posiitive status as well, just to be sure */
+ outl((1<<7) | (1<<12), gpio_base+0x48);
+
+ /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
+ outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
+
+ /* Determine the current state by reading the GPIO bit */
+ /* Earlier stages of the boot process have established the state */
+ dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
+ ? DCON_SOURCE_CPU
+ : DCON_SOURCE_DCON;
+ dcon_pending = dcon_source;
+
+ return 0;
+}
+
+static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
+{
+ if (dcon_client == NULL)
+ return 0;
+
+ /* Turn off the DCON. Entirely. */
+ dcon_write(DCON_REG_MODE, 0x39);
+ dcon_write(DCON_REG_MODE, 0x32);
+ return 0;
+}
+
+static int dcon_conswitch_notify(struct notifier_block *nb,
+ unsigned long mode, void *dummy)
+{
+ if (mode == CONSOLE_EVENT_SWITCH_TEXT)
+ dcon_sleep(DCON_ACTIVE);
+
+ return 0;
+}
+
+static struct notifier_block dcon_nb = {
+ .notifier_call = dcon_reboot_notify,
+ .priority = -1,
+};
+
+static struct notifier_block dcon_console_nb = {
+ .notifier_call = dcon_conswitch_notify,
+ .priority = -1,
+};
+
+static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+ struct i2c_client *client;
+ uint16_t ver;
+ int rc, i;
+
+ if (!olpc_has_dcon()) {
+ printk("olpc-dcon: No DCON is attached.\n");
+ return -ENODEV;
+ }
+
+ if (num_registered_fb >= 1)
+ fbinfo = registered_fb[0];
+
+ if (adap->id != I2C_HW_SMBUS_SCX200) {
+ printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
+ adap->id, I2C_HW_SMBUS_SCX200);
+ return -ENXIO;
+ }
+
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (client == NULL)
+ return -ENOMEM;
+
+ strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
+ client->addr = addr;
+ client->adapter = adap;
+ client->driver = &dcon_driver;
+
+ if ((rc = i2c_attach_client(client)) != 0) {
+ printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
+ goto eclient;
+ }
+
+ ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
+
+ if ((ver >> 8) != 0xDC) {
+ printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver);
+ rc = -ENXIO;
+ goto ei2c;
+ }
+
+ if ((rc = dcon_request_irq())) {
+ printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n");
+ goto ei2c;
+ }
+
+ if (ver < 0xdc02 && !noinit) {
+ /* Initialize the DCON registers */
+
+ /* Start with work-arounds for DCON ASIC */
+ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
+ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
+ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
+ i2c_smbus_write_word_data(client, 0x0b, 0x007a);
+ i2c_smbus_write_word_data(client, 0x36, 0x025c);
+ i2c_smbus_write_word_data(client, 0x37, 0x025e);
+
+ /* Initialise SDRAM */
+
+ i2c_smbus_write_word_data(client, 0x3b, 0x002b);
+ i2c_smbus_write_word_data(client, 0x41, 0x0101);
+ i2c_smbus_write_word_data(client, 0x42, 0x0101);
+ }
+
+ /* Colour swizzle, AA, no passthrough, backlight */
+
+ dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
+ if (useaa)
+ dcon_disp_mode |= MODE_COL_AA;
+ i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
+
+
+ /* Set the scanline to interrupt on during resume */
+
+ i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
+
+ /* Add the DCON device */
+
+ dcon_device = platform_device_alloc("dcon", -1);
+
+ if (dcon_device == NULL) {
+ printk(KERN_ERR "dcon: Unable to create the DCON device\n");
+ rc = -ENOMEM;
+ goto eirq;
+ }
+
+ if ((rc = platform_device_add(dcon_device))) {
+ printk(KERN_ERR "dcon: Unable to add the DCON device\n");
+ goto edev;
+ }
+
+ for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
+ device_create_file(&dcon_device->dev, &dcon_device_files[i]);
+
+ /* Add the backlight device for the DCON */
+
+ dcon_client = client;
+
+ dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
+ NULL, &dcon_bl_ops);
+
+ if (IS_ERR(dcon_bl_dev)) {
+ printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
+ dcon_bl_dev = NULL;
+ }
+ else {
+ dcon_bl_dev->props.max_brightness = 15;
+ dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
+ dcon_bl_dev->props.brightness = dcon_get_backlight();
+
+ backlight_update_status(dcon_bl_dev);
+ }
+
+ register_reboot_notifier(&dcon_nb);
+ console_event_register(&dcon_console_nb);
+
+ printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF);
+
+ return 0;
+
+ edev:
+ platform_device_unregister(dcon_device);
+ dcon_device = NULL;
+ eirq:
+ free_irq(DCON_IRQ, &dcon_driver);
+ ei2c:
+ i2c_detach_client(client);
+ eclient:
+ kfree(client);
+
+ return rc;
+}
+
+static int dcon_attach(struct i2c_adapter *adap)
+{
+ int ret;
+
+ ret = i2c_probe(adap, &addr_data, dcon_probe);
+
+ if (dcon_client == NULL)
+ printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
+
+ return ret;
+}
+
+static int dcon_detach(struct i2c_client *client)
+{
+ int rc;
+ dcon_client = NULL;
+
+ unregister_reboot_notifier(&dcon_nb);
+ console_event_unregister(&dcon_console_nb);
+
+ free_irq(DCON_IRQ, &dcon_driver);
+
+ if ((rc = i2c_detach_client(client)) == 0)
+ kfree(i2c_get_clientdata(client));
+
+ if (dcon_bl_dev != NULL)
+ backlight_device_unregister(dcon_bl_dev);
+
+ if (dcon_device != NULL)
+ platform_device_unregister(dcon_device);
+ cancel_work_sync(&dcon_work);
+
+ return rc;
+}
+
+
+#ifdef CONFIG_PM
+static int dcon_suspend(struct i2c_client *client, pm_message_t state)
+{
+ if (dcon_sleep_val != DCON_ACTIVE)
+ return 0;
+
+ /* Set up the DCON to have the source */
+ return dcon_set_source_sync(DCON_SOURCE_DCON);
+}
+
+static int dcon_resume(struct i2c_client *client)
+{
+ int x;
+ if (dcon_sleep_val != DCON_ACTIVE)
+ return 0;
+
+ /* HACK: ensure the bus is stable */
+ do {
+ x = dcon_read(DCON_REG_ID);
+ } while (x < 0);
+
+ return dcon_set_source(DCON_SOURCE_CPU);
+}
+
+#endif
+
+static irqreturn_t dcon_interrupt(int irq, void *id)
+{
+ int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
+
+ /* Clear the negative edge status for GPIO7 */
+ outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
+
+ switch (status & 3) {
+ case 3:
+ printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
+ break;
+ case 2: /* switch to DCON mode */
+ case 1: /* switch to CPU mode */
+ dcon_switched = 1;
+ wake_up(&dcon_wait_queue);
+ break;
+ case 0:
+ printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct i2c_driver dcon_driver = {
+ .driver = {
+ .name = "OLPC-DCON",
+ },
+ .id = I2C_DRIVERID_DCON,
+ .attach_adapter = dcon_attach,
+ .detach_client = dcon_detach,
+#ifdef CONFIG_PM
+ .suspend = dcon_suspend,
+ .resume = dcon_resume,
+#endif
+};
+
+
+static int __init olpc_dcon_init(void)
+{
+ i2c_add_driver(&dcon_driver);
+ return 0;
+}
+
+static void __exit olpc_dcon_exit(void)
+{
+ i2c_del_driver(&dcon_driver);
+}
+
+module_init(olpc_dcon_init);
+module_exit(olpc_dcon_exit);
+
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef OLPC_DCON_H_
+#define OLPC_DCON_H_
+
+/* DCON registers */
+
+#define DCON_REG_ID 0
+#define DCON_REG_MODE 1
+
+#define MODE_PASSTHRU (1<<0)
+#define MODE_SLEEP (1<<1)
+#define MODE_SLEEP_AUTO (1<<2)
+#define MODE_BL_ENABLE (1<<3)
+#define MODE_BLANK (1<<4)
+#define MODE_CSWIZZLE (1<<5)
+#define MODE_COL_AA (1<<6)
+#define MODE_MONO_LUMA (1<<7)
+#define MODE_SCAN_INT (1<<8)
+#define MODE_CLOCKDIV (1<<9)
+#define MODE_DEBUG (1<<14)
+#define MODE_SELFTEST (1<<15)
+
+#define DCON_REG_HRES 2
+#define DCON_REG_HTOTAL 3
+#define DCON_REG_HSYNC_WIDTH 4
+#define DCON_REG_VRES 5
+#define DCON_REG_VTOTAL 6
+#define DCON_REG_VSYNC_WIDTH 7
+#define DCON_REG_TIMEOUT 8
+#define DCON_REG_SCAN_INT 9
+#define DCON_REG_BRIGHT 10
+
+/* GPIO registers (CS5536) */
+
+#define MSR_LBAR_GPIO 0x5140000C
+
+#define GPIOx_OUT_VAL 0x00
+#define GPIOx_OUT_EN 0x04
+#define GPIOx_IN_EN 0x20
+#define GPIOx_INV_EN 0x24
+#define GPIOx_IN_FLTR_EN 0x28
+#define GPIOx_EVNTCNT_EN 0x2C
+#define GPIOx_READ_BACK 0x30
+#define GPIOx_EVNT_EN 0x38
+#define GPIOx_NEGEDGE_EN 0x44
+#define GPIOx_NEGEDGE_STS 0x4C
+#define GPIO_FLT7_AMNT 0xD8
+#define GPIO_MAP_X 0xE0
+#define GPIO_MAP_Y 0xE4
+#define GPIO_FE7_SEL 0xF7
+
+
+/* Status values */
+
+#define DCONSTAT_SCANINT 0
+#define DCONSTAT_SCANINT_DCON 1
+#define DCONSTAT_DISPLAYLOAD 2
+#define DCONSTAT_MISSED 3
+
+/* Source values */
+
+#define DCON_SOURCE_DCON 0
+#define DCON_SOURCE_CPU 1
+
+/* Output values */
+#define DCON_OUTPUT_COLOR 0
+#define DCON_OUTPUT_MONO 1
+
+/* Sleep values */
+#define DCON_ACTIVE 0
+#define DCON_SLEEP 1
+
+/* Interrupt */
+#define DCON_IRQ 6
+
+#endif
--- /dev/null
+/*
+ * Definitions for Open Firmware client interface on 32-bit system.
+ * OF Cell size is 4. Integer properties are encoded big endian,
+ * as with all OF implementations.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _OFW_H
+#define _OFW_H
+
+extern int ofw(char *, int, int, ...);
+
+#endif
--- /dev/null
+/* OLPC machine specific definitions */
+
+#ifndef ASM_OLPC_H_
+#define ASM_OLPC_H_
+
+#include <asm/geode.h>
+
+struct olpc_platform_t {
+ int flags;
+ int boardrev;
+ int ecver;
+};
+
+#define OLPC_F_PRESENT 0x01
+#define OLPC_F_DCON 0x02
+#define OLPC_F_VSA 0x04
+
+enum
+{
+ OLPC_REV_A = 0,
+
+ OLPC_REV_PRE_B1,
+ OLPC_REV_B1,
+ OLPC_REV_PRE_B2,
+ OLPC_REV_B2,
+ OLPC_REV_PRE_B3,
+ OLPC_REV_B3,
+ OLPC_REV_B4,
+ OLPC_REV_C1,
+ OLPC_REV_R1,
+ OLPC_REV_UNKNOWN /* this should always come last */
+};
+
+#ifndef CONFIG_OLPC
+
+static inline int machine_is_olpc(void) { return 0; }
+static inline int olpc_has_dcon(void) { return 0; }
+static inline int olpc_has_vsa(void) { return 0; }
+static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; }
+
+#else
+
+extern struct olpc_platform_t olpc_platform_info;
+
+static inline int
+machine_is_olpc(void)
+{
+ return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
+}
+
+static inline int
+olpc_has_dcon(void)
+{
+ return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
+}
+
+static inline int
+olpc_has_vsa(void)
+{
+ return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
+}
+
+static inline int
+olpc_get_rev(void)
+{
+ return olpc_platform_info.boardrev;
+}
+
+static inline int
+olpc_rev_after(int rev)
+{
+ return olpc_platform_info.boardrev > rev &&
+ olpc_platform_info.boardrev != OLPC_REV_UNKNOWN;
+}
+
+static inline int
+olpc_rev_before(int rev)
+{
+ return olpc_platform_info.boardrev < rev ||
+ olpc_platform_info.boardrev == OLPC_REV_UNKNOWN;
+}
+
+#endif
+
+/* EC functions */
+
+int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
+ unsigned char *outbuf, size_t outlen);
+
+void olpc_register_battery_callback(void (*f)(unsigned long));
+void olpc_deregister_battery_callback(void);
+
+/* EC commands and responses */
+
+/* SCI source values */
+
+#define EC_SCI_SRC_EMPTY 0x00
+#define EC_SCI_SRC_GAME 0x01
+#define EC_SCI_SRC_BATTERY 0x02
+#define EC_SCI_SRC_BATSOC 0x04
+#define EC_SCI_SRC_BATERR 0x08
+#define EC_SCI_SRC_EBOOK 0x10
+#define EC_SCI_SRC_WLAN 0x20
+#define EC_SCI_SRC_ACPWR 0x40
+
+/* GPIO assignments */
+
+#define OLPC_GPIO_MIC_AC 1
+#define OLPC_GPIO_DCON_IRQ 7
+#define OLPC_GPIO_THRM_ALRM 10
+#define OLPC_GPIO_WORKAUX 24
+#define OLPC_GPIO_LID 26
+#define OLPC_GPIO_ECSCI 27
+
+#endif
+
--- /dev/null
+#ifndef _I386_PROM_H
+#define _I386_PROM_H
+#ifdef __KERNEL__
+
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC64 by David S. Miller
+ * Updates for i386/OLPC by Andres Salomon
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+ char *name;
+ int length;
+ void *value;
+ struct property *next;
+};
+
+struct device_node {
+ const char *name;
+ const char *type;
+ phandle node;
+// phandle linux_phandle;
+ char *path_component_name;
+ char *full_name;
+
+ struct property *properties;
+ struct property *deadprops; /* removed properties */
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+ struct device_node *next; /* next device of same type */
+ struct device_node *allnext; /* next in list of all nodes */
+ struct proc_dir_entry *pde; /* this node's proc directory */
+ struct kref kref;
+ unsigned long _flags;
+ void *data;
+};
+
+/* flag descriptions */
+#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+#define OF_BAD_ADDR ((u64)-1)
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+ dn->pde = de;
+}
+
+extern struct device_node *of_find_node_by_name(struct device_node *from,
+ const char *name);
+#define for_each_node_by_name(dn, name) \
+ for (dn = of_find_node_by_name(NULL, name); dn; \
+ dn = of_find_node_by_name(dn, name))
+extern struct device_node *of_find_node_by_type(struct device_node *from,
+ const char *type);
+#define for_each_node_by_type(dn, type) \
+ for (dn = of_find_node_by_type(NULL, type); dn; \
+ dn = of_find_node_by_type(dn, type))
+extern struct device_node *of_find_compatible_node(struct device_node *from,
+ const char *type, const char *compat);
+extern struct device_node *of_find_node_by_path(const char *path);
+extern struct device_node *of_find_node_by_phandle(phandle handle);
+extern struct device_node *of_get_parent(const struct device_node *node);
+extern struct device_node *of_get_next_child(const struct device_node *node,
+ struct device_node *prev);
+extern struct property *of_find_property(const struct device_node *np,
+ const char *name,
+ int *lenp);
+//extern struct device_node *of_node_get(struct device_node *node);
+//extern void of_node_put(struct device_node *node);
+extern int of_device_is_compatible(const struct device_node *device,
+ const char *);
+extern const void *of_get_property(const struct device_node *node,
+ const char *name,
+ int *lenp);
+#define get_property(node,name,lenp) of_get_property(node,name,lenp)
+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern int of_getintprop_default(struct device_node *np,
+ const char *name,
+ int def);
+extern int of_n_addr_cells(struct device_node *np);
+extern int of_n_size_cells(struct device_node *np);
+
+extern void prom_build_devicetree(void);
+
+#endif /* __KERNEL__ */
+#endif
--- /dev/null
+/*
+ * Driver model for batteries
+ *
+ * © 2006 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Based on LED Class support, by John Lenz and Richard Purdie:
+ *
+ * © 2005 John Lenz <lenz@cs.wisc.edu>
+ * © 2005-2006 Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_BATTERY_H__
+#define __LINUX_BATTERY_H__
+
+struct device;
+struct class_device;
+
+/*
+ * Battery Core
+ */
+#define PWRDEV_TYPE_BATTERY 0
+#define PWRDEV_TYPE_AC 1
+
+#define BAT_STAT_PRESENT (1<<0)
+#define BAT_STAT_LOW (1<<1)
+#define BAT_STAT_FULL (1<<2)
+#define BAT_STAT_CHARGING (1<<3)
+#define BAT_STAT_DISCHARGING (1<<4)
+#define BAT_STAT_OVERTEMP (1<<5)
+#define BAT_STAT_CRITICAL (1<<6)
+#define BAT_STAT_FIRE (1<<7)
+#define BAT_STAT_CHARGE_DONE (1<<8)
+
+/* Thou shalt not export any attributes in sysfs except these, and
+ with these units: */
+#define BAT_INFO_STATUS "status" /* Not free-form. Use
+ provided function */
+#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */
+#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */
+
+#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */
+#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */
+
+#define BAT_INFO_VOLTAGE "voltage" /* mV */
+#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */
+
+#define BAT_INFO_CURRENT "current" /* mA */
+#define BAT_INFO_CURRENT_NOW "current_now" /* mA */
+
+#define BAT_INFO_POWER "power" /* mW */
+#define BAT_INFO_POWER_NOW "power_now" /* mW */
+
+/* The following capacity/charge properties are represented in either
+ mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
+#define BAT_INFO_RATE "rate" /* CAP_UNITS */
+#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */
+#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */
+#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */
+#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */
+#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */
+#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be
+ either mA or mW */
+
+#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */
+
+#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */
+#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */
+#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */
+#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */
+
+#define BAT_INFO_MANUFACTURER "manufacturer" /* string */
+#define BAT_INFO_TECHNOLOGY "technology" /* string */
+#define BAT_INFO_MODEL "model" /* string */
+#define BAT_INFO_SERIAL "serial" /* string */
+#define BAT_INFO_OEM_INFO "oem_info" /* string */
+
+#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */
+#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */
+#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */
+
+struct battery_dev {
+ int status_cap;
+ int id;
+ int type;
+ const char *name;
+
+ struct device *dev;
+};
+
+int battery_device_register(struct device *parent,
+ struct battery_dev *battery_cdev);
+void battery_device_unregister(struct battery_dev *battery_cdev);
+
+
+ssize_t battery_attribute_show_status(char *buf, unsigned long status);
+ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
+#endif /* __LINUX_BATTERY_H__ */
--- /dev/null
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+
+#include <asm/olpc.h>
+#include "cs5535audio.h"
+
+/*
+ * OLPC has an additional feature on top of the regular AD1888 codec features.
+ * It has an Analog Input mode that is switched into (after disabling the
+ * High Pass Filter) via GPIO. It is only supported on B2 and later models.
+ */
+
+int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
+{
+ int err;
+
+ /*
+ * update the High Pass Filter (via AC97_AD_TEST2), and then set
+ * Analog Input mode through a GPIO.
+ */
+
+ if (val) {
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ 1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
+ geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+ }
+ else {
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ 1<<AC97_AD_HPFD_SHIFT, 0);
+ geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+ }
+ if (err < 0)
+ snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(olpc_ai_enable);
+
+static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
+ GPIO_OUTPUT_VAL);
+ return 0;
+}
+
+static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
+ struct snd_ac97 *ac97 = cs5535au->ac97;
+
+ olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
+
+ return 1;
+}
+
+static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DC Mode Enable",
+ .info = snd_cs5535audio_ai_info,
+ .get = snd_cs5535audio_ai_get,
+ .put = snd_cs5535audio_ai_put,
+ .private_value = 0
+};
+
+void __devinit olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97)
+{
+ /* Bail if this isn't an OLPC platform */
+ if (!machine_is_olpc())
+ return;
+
+ /* If on an OLPC B3 or higher, invert EAPD. */
+ if (olpc_rev_after(OLPC_REV_B2))
+ ac97->scaps |= AC97_SCAP_INV_EAPD;
+}
+
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ struct snd_ctl_elem_id elem;
+
+ /* Bail if this isn't an OLPC platform */
+ if (!machine_is_olpc())
+ return 0;
+
+ /* drop the original ad1888 HPF control */
+ memset(&elem, 0, sizeof(elem));
+ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ strcpy(elem.name, "High Pass Filter Enable");
+ snd_ctl_remove_id(card, &elem);
+
+ /* add the override for OLPC's HPF */
+ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
+ ac97->private_data));
+}
+++ /dev/null
-/*
- * setup.S Copyright (C) 1991, 1992 Linus Torvalds
- *
- * setup.s is responsible for getting the system data from the BIOS,
- * and putting them into the appropriate places in system memory.
- * both setup.s and system has been loaded by the bootblock.
- *
- * This code asks the bios for memory/disk/other parameters, and
- * puts them in a "safe" place: 0x90000-0x901FF, ie where the
- * boot-block used to be. It is then up to the protected mode
- * system to read them from there before the area is overwritten
- * for buffer-blocks.
- *
- * Move PS/2 aux init code to psaux.c
- * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
- *
- * some changes and additional features by Christoph Niemann,
- * March 1993/June 1994 (Christoph.Niemann@linux.org)
- *
- * add APM BIOS checking by Stephen Rothwell, May 1994
- * (sfr@canb.auug.org.au)
- *
- * High load stuff, initrd support and position independency
- * by Hans Lermen & Werner Almesberger, February 1996
- * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
- *
- * Video handling moved to video.S by Martin Mares, March 1996
- * <mj@k332.feld.cvut.cz>
- *
- * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
- * parsons) to avoid loadlin confusion, July 1997
- *
- * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
- * <stiker@northlink.com>
- *
- * Fix to work around buggy BIOSes which don't use carry bit correctly
- * and/or report extended memory in CX/DX for e801h memory size detection
- * call. As a result the kernel got wrong figures. The int15/e801h docs
- * from Ralf Brown interrupt list seem to indicate AX/BX should be used
- * anyway. So to avoid breaking many machines (presumably there was a reason
- * to orginally use CX/DX instead of AX/BX), we do a kludge to see
- * if CX/DX have been changed in the e801 call and if so use AX/BX .
- * Michael Miller, April 2001 <michaelm@mjmm.org>
- *
- * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
- * by Robert Schwebel, December 2001 <robert@schwebel.de>
- */
-
-#include <asm/segment.h>
-#include <linux/utsrelease.h>
-#include <linux/compile.h>
-#include <asm/boot.h>
-#include <asm/e820.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-/* Signature words to ensure LILO loaded us right */
-#define SIG1 0xAA55
-#define SIG2 0x5A5A
-
-INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
-SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
-SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
- # ... and the former contents of CS
-
-DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
-
-.code16
-.globl begtext, begdata, begbss, endtext, enddata, endbss
-
-.text
-begtext:
-.data
-begdata:
-.bss
-begbss:
-.text
-
-start:
- jmp trampoline
-
-# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
-
- .ascii "HdrS" # header signature
- .word 0x0206 # header version number (>= 0x0105)
- # or else old loadlin-1.5 will fail)
-realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
-start_sys_seg: .word SYSSEG
- .word kernel_version # pointing to kernel version string
- # above section of header is compatible
- # with loadlin-1.5 (header v1.5). Don't
- # change it.
-
-type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
- # Bootlin, SYSLX, bootsect...)
- # See Documentation/i386/boot.txt for
- # assigned ids
-
-# flags, unused bits must be zero (RFU) bit within loadflags
-loadflags:
-LOADED_HIGH = 1 # If set, the kernel is loaded high
-CAN_USE_HEAP = 0x80 # If set, the loader also has set
- # heap_end_ptr to tell how much
- # space behind setup.S can be used for
- # heap purposes.
- # Only the loader knows what is free
-#ifndef __BIG_KERNEL__
- .byte 0
-#else
- .byte LOADED_HIGH
-#endif
-
-setup_move_size: .word 0x8000 # size to move, when setup is not
- # loaded at 0x90000. We will move setup
- # to 0x90000 then just before jumping
- # into the kernel. However, only the
- # loader knows how much data behind
- # us also needs to be loaded.
-
-code32_start: # here loaders can put a different
- # start address for 32-bit code.
-#ifndef __BIG_KERNEL__
- .long 0x1000 # 0x1000 = default for zImage
-#else
- .long 0x100000 # 0x100000 = default for big kernel
-#endif
-
-ramdisk_image: .long 0 # address of loaded ramdisk image
- # Here the loader puts the 32-bit
- # address where it loaded the image.
- # This only will be read by the kernel.
-
-ramdisk_size: .long 0 # its size in bytes
-
-bootsect_kludge:
- .long 0 # obsolete
-
-heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
- # space from here (exclusive) down to
- # end of setup code can be used by setup
- # for local heap purposes.
-
-pad1: .word 0
-cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
- # If nonzero, a 32-bit pointer
- # to the kernel command line.
- # The command line should be
- # located between the start of
- # setup and the end of low
- # memory (0xa0000), or it may
- # get overwritten before it
- # gets read. If this field is
- # used, there is no longer
- # anything magical about the
- # 0x90000 segment; the setup
- # can be located anywhere in
- # low memory 0x10000 or higher.
-
-ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
- # (Header version 0x0203 or later)
- # The highest safe address for
- # the contents of an initrd
-
-kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
- #required for protected mode
- #kernel
-#ifdef CONFIG_RELOCATABLE
-relocatable_kernel: .byte 1
-#else
-relocatable_kernel: .byte 0
-#endif
-pad2: .byte 0
-pad3: .word 0
-
-cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
- #added with boot protocol
- #version 2.06
-
-trampoline: call start_of_setup
- .align 16
- # The offset at this point is 0x240
- .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
-# End of setup header #####################################################
-
-start_of_setup:
-# Bootlin depends on this being done early
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
-
-#ifdef SAFE_RESET_DISK_CONTROLLER
-# Reset the disk controller.
- movw $0x0000, %ax
- movb $0x80, %dl
- int $0x13
-#endif
-
-# Set %ds = %cs, we know that SETUPSEG = %cs at this point
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-# Check signature at end of setup
- cmpw $SIG1, setup_sig1
- jne bad_sig
-
- cmpw $SIG2, setup_sig2
- jne bad_sig
-
- jmp good_sig1
-
-# Routine to print asciiz string at ds:si
-prtstr:
- lodsb
- andb %al, %al
- jz fin
-
- call prtchr
- jmp prtstr
-
-fin: ret
-
-# Space printing
-prtsp2: call prtspc # Print double space
-prtspc: movb $0x20, %al # Print single space (note: fall-thru)
-
-# Part of above routine, this one just prints ascii al
-prtchr: pushw %ax
- pushw %cx
- movw $7,%bx
- movw $0x01, %cx
- movb $0x0e, %ah
- int $0x10
- popw %cx
- popw %ax
- ret
-
-beep: movb $0x07, %al
- jmp prtchr
-
-no_sig_mess: .string "No setup signature found ..."
-
-good_sig1:
- jmp good_sig
-
-# We now have to find the rest of the setup code/data
-bad_sig:
- movw %cs, %ax # SETUPSEG
- subw $DELTA_INITSEG, %ax # INITSEG
- movw %ax, %ds
- xorb %bh, %bh
- movb (497), %bl # get setup sect from bootsect
- subw $4, %bx # LILO loads 4 sectors of setup
- shlw $8, %bx # convert to words (1sect=2^8 words)
- movw %bx, %cx
- shrw $3, %bx # convert to segment
- addw $SYSSEG, %bx
- movw %bx, %cs:start_sys_seg
-# Move rest of setup code/data to here
- movw $2048, %di # four sectors loaded by LILO
- subw %si, %si
- pushw %cs
- popw %es
- movw $SYSSEG, %ax
- movw %ax, %ds
- rep
- movsw
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
- cmpw $SIG1, setup_sig1
- jne no_sig
-
- cmpw $SIG2, setup_sig2
- jne no_sig
-
- jmp good_sig
-
-no_sig:
- lea no_sig_mess, %si
- call prtstr
-
-no_sig_loop:
- hlt
- jmp no_sig_loop
-
-good_sig:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
-# Check if an old loader tries to load a big-kernel
- testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
- jz loader_ok # No, no danger for old loaders.
-
- cmpb $0, %cs:type_of_loader # Do we have a loader that
- # can deal with us?
- jnz loader_ok # Yes, continue.
-
- pushw %cs # No, we have an old loader,
- popw %ds # die.
- lea loader_panic_mess, %si
- call prtstr
-
- jmp no_sig_loop
-
-loader_panic_mess: .string "Wrong loader, giving up..."
-
-# check minimum cpuid
-# we do this here because it is the last place we can actually
-# show a user visible error message. Later the video modus
-# might be already messed up.
-loader_ok:
- call verify_cpu
- testl %eax,%eax
- jz cpu_ok
- movw %cs,%ax # aka SETUPSEG
- movw %ax,%ds
- lea cpu_panic_mess,%si
- call prtstr
-1: jmp 1b
-
-cpu_panic_mess:
- .asciz "PANIC: CPU too old for this kernel."
-
-#include "../kernel/verify_cpu.S"
-
-cpu_ok:
-# Get memory size (extended mem, kB)
-
- xorl %eax, %eax
- movl %eax, (0x1e0)
-#ifndef STANDARD_MEMORY_BIOS_CALL
- movb %al, (E820NR)
-# Try three different memory detection schemes. First, try
-# e820h, which lets us assemble a memory map, then try e801h,
-# which returns a 32-bit memory size, and finally 88h, which
-# returns 0-64m
-
-# method E820H:
-# the memory map from hell. e820h returns memory classified into
-# a whole bunch of different types, and allows memory holes and
-# everything. We scan through this memory map and build a list
-# of the first 32 memory areas, which we return at [E820MAP].
-# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
-
-#define SMAP 0x534d4150
-
-meme820:
- xorl %ebx, %ebx # continuation counter
- movw $E820MAP, %di # point into the whitelist
- # so we can have the bios
- # directly write into it.
-
-jmpe820:
- movl $0x0000e820, %eax # e820, upper word zeroed
- movl $SMAP, %edx # ascii 'SMAP'
- movl $20, %ecx # size of the e820rec
- pushw %ds # data record.
- popw %es
- int $0x15 # make the call
- jc bail820 # fall to e801 if it fails
-
- cmpl $SMAP, %eax # check the return is `SMAP'
- jne bail820 # fall to e801 if it fails
-
-# cmpl $1, 16(%di) # is this usable memory?
-# jne again820
-
- # If this is usable memory, we save it by simply advancing %di by
- # sizeof(e820rec).
- #
-good820:
- movb (E820NR), %al # up to 128 entries
- cmpb $E820MAX, %al
- jae bail820
-
- incb (E820NR)
- movw %di, %ax
- addw $20, %ax
- movw %ax, %di
-again820:
- cmpl $0, %ebx # check to see if
- jne jmpe820 # %ebx is set to EOF
-bail820:
-
-
-# method E801H:
-# memory size is in 1k chunksizes, to avoid confusing loadlin.
-# we store the 0xe801 memory size in a completely different place,
-# because it will most likely be longer than 16 bits.
-# (use 1e0 because that's what Larry Augustine uses in his
-# alternative new memory detection scheme, and it's sensible
-# to write everything into the same place.)
-
-meme801:
- stc # fix to work around buggy
- xorw %cx,%cx # BIOSes which don't clear/set
- xorw %dx,%dx # carry on pass/error of
- # e801h memory size call
- # or merely pass cx,dx though
- # without changing them.
- movw $0xe801, %ax
- int $0x15
- jc mem88
-
- cmpw $0x0, %cx # Kludge to handle BIOSes
- jne e801usecxdx # which report their extended
- cmpw $0x0, %dx # memory in AX/BX rather than
- jne e801usecxdx # CX/DX. The spec I have read
- movw %ax, %cx # seems to indicate AX/BX
- movw %bx, %dx # are more reasonable anyway...
-
-e801usecxdx:
- andl $0xffff, %edx # clear sign extend
- shll $6, %edx # and go from 64k to 1k chunks
- movl %edx, (0x1e0) # store extended memory size
- andl $0xffff, %ecx # clear sign extend
- addl %ecx, (0x1e0) # and add lower memory into
- # total size.
-
-# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
-# 64mb, depending on the bios) in ax.
-mem88:
-
-#endif
- movb $0x88, %ah
- int $0x15
- movw %ax, (2)
-
-# Set the keyboard repeat rate to the max
- movw $0x0305, %ax
- xorw %bx, %bx
- int $0x16
-
-#ifndef CONFIG_VGA_NOPROBE
-
-# Check for video adapter and its parameters and allow the
-# user to browse video modes.
- call video # NOTE: we need %ds pointing
- # to bootsector
-#endif
-
-# Get hd0 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x41), %si
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- pushw %ax
- movw %ax, %es
- movw $0x0080, %di
- movw $0x10, %cx
- pushw %cx
- cld
- rep
- movsb
-# Get hd1 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x46), %si
- popw %cx
- popw %es
- movw $0x0090, %di
- rep
- movsb
-# Check that there IS a hd1 :-)
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
- jc no_disk1
-
- cmpb $3, %ah
- je is_disk1
-
-no_disk1:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw $0x0090, %di
- movw $0x10, %cx
- xorw %ax, %ax
- cld
- rep
- stosb
-is_disk1:
-# check for Micro Channel (MCA) bus
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- xorw %ax, %ax
- movw %ax, (0xa0) # set table length to 0
- movb $0xc0, %ah
- stc
- int $0x15 # moves feature table to es:bx
- jc no_mca
-
- pushw %ds
- movw %es, %ax
- movw %ax, %ds
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw %bx, %si
- movw $0xa0, %di
- movw (%si), %cx
- addw $2, %cx # table length is a short
- cmpw $0x10, %cx
- jc sysdesc_ok
-
- movw $0x10, %cx # we keep only first 16 bytes
-sysdesc_ok:
- rep
- movsb
- popw %ds
-no_mca:
-#ifdef CONFIG_X86_VOYAGER
- movb $0xff, 0x40 # flag on config found
- movb $0xc0, %al
- mov $0xff, %ah
- int $0x15 # put voyager config info at es:di
- jc no_voyager
- movw $0x40, %si # place voyager info in apm table
- cld
- movw $7, %cx
-voyager_rep:
- movb %es:(%di), %al
- movb %al,(%si)
- incw %di
- incw %si
- decw %cx
- jnz voyager_rep
-no_voyager:
-#endif
-# Check for PS/2 pointing device
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- movb $0, (0x1ff) # default is no pointing device
- int $0x11 # int 0x11: equipment list
- testb $0x04, %al # check if mouse installed
- jz no_psmouse
-
- movb $0xAA, (0x1ff) # device present
-no_psmouse:
-
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
- movl $0x0000E980, %eax # IST Support
- movl $0x47534943, %edx # Request value
- int $0x15
-
- movl %eax, (96)
- movl %ebx, (100)
- movl %ecx, (104)
- movl %edx, (108)
-#endif
-
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-# Then check for an APM BIOS...
- # %ds points to the bootsector
- movw $0, 0x40 # version = 0 means no APM BIOS
- movw $0x05300, %ax # APM BIOS installation check
- xorw %bx, %bx
- int $0x15
- jc done_apm_bios # Nope, no APM BIOS
-
- cmpw $0x0504d, %bx # Check for "PM" signature
- jne done_apm_bios # No signature, no APM BIOS
-
- andw $0x02, %cx # Is 32 bit supported?
- je done_apm_bios # No 32-bit, no (good) APM BIOS
-
- movw $0x05304, %ax # Disconnect first just in case
- xorw %bx, %bx
- int $0x15 # ignore return code
- movw $0x05303, %ax # 32 bit connect
- xorl %ebx, %ebx
- xorw %cx, %cx # paranoia :-)
- xorw %dx, %dx # ...
- xorl %esi, %esi # ...
- xorw %di, %di # ...
- int $0x15
- jc no_32_apm_bios # Ack, error.
-
- movw %ax, (66) # BIOS code segment
- movl %ebx, (68) # BIOS entry point offset
- movw %cx, (72) # BIOS 16 bit code segment
- movw %dx, (74) # BIOS data segment
- movl %esi, (78) # BIOS code segment lengths
- movw %di, (82) # BIOS data segment length
-# Redo the installation check as the 32 bit connect
-# modifies the flags returned on some BIOSs
- movw $0x05300, %ax # APM BIOS installation check
- xorw %bx, %bx
- xorw %cx, %cx # paranoia
- int $0x15
- jc apm_disconnect # error -> shouldn't happen
-
- cmpw $0x0504d, %bx # check for "PM" signature
- jne apm_disconnect # no sig -> shouldn't happen
-
- movw %ax, (64) # record the APM BIOS version
- movw %cx, (76) # and flags
- jmp done_apm_bios
-
-apm_disconnect: # Tidy up
- movw $0x05304, %ax # Disconnect
- xorw %bx, %bx
- int $0x15 # ignore return code
-
- jmp done_apm_bios
-
-no_32_apm_bios:
- andw $0xfffd, (76) # remove 32 bit support bit
-done_apm_bios:
-#endif
-
-#include "edd.S"
-
-# Now we want to move to protected mode ...
- cmpw $0, %cs:realmode_swtch
- jz rmodeswtch_normal
-
- lcall *%cs:realmode_swtch
-
- jmp rmodeswtch_end
-
-rmodeswtch_normal:
- pushw %cs
- call default_switch
-
-rmodeswtch_end:
-# Now we move the system to its rightful place ... but we check if we have a
-# big-kernel. In that case we *must* not move it ...
- testb $LOADED_HIGH, %cs:loadflags
- jz do_move0 # .. then we have a normal low
- # loaded zImage
- # .. or else we have a high
- # loaded bzImage
- jmp end_move # ... and we skip moving
-
-do_move0:
- movw $0x100, %ax # start of destination segment
- movw %cs, %bp # aka SETUPSEG
- subw $DELTA_INITSEG, %bp # aka INITSEG
- movw %cs:start_sys_seg, %bx # start of source segment
- cld
-do_move:
- movw %ax, %es # destination segment
- incb %ah # instead of add ax,#0x100
- movw %bx, %ds # source segment
- addw $0x100, %bx
- subw %di, %di
- subw %si, %si
- movw $0x800, %cx
- rep
- movsw
- cmpw %bp, %bx # assume start_sys_seg > 0x200,
- # so we will perhaps read one
- # page more than needed, but
- # never overwrite INITSEG
- # because destination is a
- # minimum one page below source
- jb do_move
-
-end_move:
-# then we load the segment descriptors
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-
-# Check whether we need to be downward compatible with version <=201
- cmpl $0, cmd_line_ptr
- jne end_move_self # loader uses version >=202 features
- cmpb $0x20, type_of_loader
- je end_move_self # bootsect loader, we know of it
-
-# Boot loader doesnt support boot protocol version 2.02.
-# If we have our code not at 0x90000, we need to move it there now.
-# We also then need to move the params behind it (commandline)
-# Because we would overwrite the code on the current IP, we move
-# it in two steps, jumping high after the first one.
- movw %cs, %ax
- cmpw $SETUPSEG, %ax
- je end_move_self
-
- cli # make sure we really have
- # interrupts disabled !
- # because after this the stack
- # should not be used
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ss, %dx
- cmpw %ax, %dx
- jb move_self_1
-
- addw $INITSEG, %dx
- subw %ax, %dx # this will go into %ss after
- # the move
-move_self_1:
- movw %ax, %ds
- movw $INITSEG, %ax # real INITSEG
- movw %ax, %es
- movw %cs:setup_move_size, %cx
- std # we have to move up, so we use
- # direction down because the
- # areas may overlap
- movw %cx, %di
- decw %di
- movw %di, %si
- subw $move_self_here+0x200, %cx
- rep
- movsb
- ljmp $SETUPSEG, $move_self_here
-
-move_self_here:
- movw $move_self_here+0x200, %cx
- rep
- movsb
- movw $SETUPSEG, %ax
- movw %ax, %ds
- movw %dx, %ss
-end_move_self: # now we are at the right place
-
-#
-# Enable A20. This is at the very best an annoying procedure.
-# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
-# AMD Elan bug fix by Robert Schwebel.
-#
-
-#if defined(CONFIG_X86_ELAN)
- movb $0x02, %al # alternate A20 gate
- outb %al, $0x92 # this works on SC410/SC520
-a20_elan_wait:
- call a20_test
- jz a20_elan_wait
- jmp a20_done
-#endif
-
-
-A20_TEST_LOOPS = 32 # Iterations per wait
-A20_ENABLE_LOOPS = 255 # Total loops to try
-
-
-#ifndef CONFIG_X86_VOYAGER
-a20_try_loop:
-
- # First, see if we are on a system with no A20 gate.
-a20_none:
- call a20_test
- jnz a20_done
-
- # Next, try the BIOS (INT 0x15, AX=0x2401)
-a20_bios:
- movw $0x2401, %ax
- pushfl # Be paranoid about flags
- int $0x15
- popfl
-
- call a20_test
- jnz a20_done
-
- # Try enabling A20 through the keyboard controller
-#endif /* CONFIG_X86_VOYAGER */
-a20_kbc:
- call empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
- call a20_test # Just in case the BIOS worked
- jnz a20_done # but had a delayed reaction.
-#endif
-
- movb $0xD1, %al # command write
- outb %al, $0x64
- call empty_8042
-
- movb $0xDF, %al # A20 on
- outb %al, $0x60
- call empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
- # Wait until a20 really *is* enabled; it can take a fair amount of
- # time on certain systems; Toshiba Tecras are known to have this
- # problem.
-a20_kbc_wait:
- xorw %cx, %cx
-a20_kbc_wait_loop:
- call a20_test
- jnz a20_done
- loop a20_kbc_wait_loop
-
- # Final attempt: use "configuration port A"
-a20_fast:
- inb $0x92, %al # Configuration Port A
- orb $0x02, %al # "fast A20" version
- andb $0xFE, %al # don't accidentally reset
- outb %al, $0x92
-
- # Wait for configuration port A to take effect
-a20_fast_wait:
- xorw %cx, %cx
-a20_fast_wait_loop:
- call a20_test
- jnz a20_done
- loop a20_fast_wait_loop
-
- # A20 is still not responding. Try frobbing it again.
- #
- decb (a20_tries)
- jnz a20_try_loop
-
- movw $a20_err_msg, %si
- call prtstr
-
-a20_die:
- hlt
- jmp a20_die
-
-a20_tries:
- .byte A20_ENABLE_LOOPS
-
-a20_err_msg:
- .ascii "linux: fatal error: A20 gate not responding!"
- .byte 13, 10, 0
-
- # If we get here, all is good
-a20_done:
-
-#endif /* CONFIG_X86_VOYAGER */
-# set up gdt and idt and 32bit start address
- lidt idt_48 # load idt with 0,0
- xorl %eax, %eax # Compute gdt_base
- movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
- shll $4, %eax
- addl %eax, code32
- addl $gdt, %eax
- movl %eax, (gdt_48+2)
- lgdt gdt_48 # load gdt with whatever is
- # appropriate
-
-# make sure any possible coprocessor is properly reset..
- xorw %ax, %ax
- outb %al, $0xf0
- call delay
-
- outb %al, $0xf1
- call delay
-
-# well, that went ok, I hope. Now we mask all interrupts - the rest
-# is done in init_IRQ().
- movb $0xFF, %al # mask all interrupts for now
- outb %al, $0xA1
- call delay
-
- movb $0xFB, %al # mask all irq's but irq2 which
- outb %al, $0x21 # is cascaded
-
-# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-# need no steenking BIOS anyway (except for the initial loading :-).
-# The BIOS-routine wants lots of unnecessary data, and it's less
-# "interesting" anyway. This is how REAL programmers do it.
-#
-# Well, now's the time to actually move into protected mode. To make
-# things as simple as possible, we do no register set-up or anything,
-# we let the gnu-compiled 32-bit programs do that. We just jump to
-# absolute address 0x1000 (or the loader supplied one),
-# in 32-bit protected mode.
-#
-# Note that the short jump isn't strictly needed, although there are
-# reasons why it might be a good idea. It won't hurt in any case.
- movw $1, %ax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp flush_instr
-
-flush_instr:
- xorw %bx, %bx # Flag to indicate a boot
- xorl %esi, %esi # Pointer to real-mode code
- movw %cs, %si
- subw $DELTA_INITSEG, %si
- shll $4, %esi # Convert to 32-bit pointer
-
-# jump to startup_32 in arch/i386/boot/compressed/head.S
-#
-# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__BOOT_CS
-#
-# but we yet haven't reloaded the CS register, so the default size
-# of the target offset still is 16 bit.
-# However, using an operand prefix (0x66), the CPU will properly
-# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
-# Manual, Mixing 16-bit and 32-bit code, page 16-6)
-
- .byte 0x66, 0xea # prefix + jmpi-opcode
-code32: .long startup_32 # will be set to %cs+startup_32
- .word __BOOT_CS
-.code32
-startup_32:
- movl $(__BOOT_DS), %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %fs
- movl %eax, %gs
- movl %eax, %ss
-
- xorl %eax, %eax
-1: incl %eax # check that A20 really IS enabled
- movl %eax, 0x00000000 # loop forever if it isn't
- cmpl %eax, 0x00100000
- je 1b
-
- # Jump to the 32bit entry point
- jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
-.code16
-
-# Here's a bunch of information about your current kernel..
-kernel_version: .ascii UTS_RELEASE
- .ascii " ("
- .ascii LINUX_COMPILE_BY
- .ascii "@"
- .ascii LINUX_COMPILE_HOST
- .ascii ") "
- .ascii UTS_VERSION
- .byte 0
-
-# This is the default real mode switch routine.
-# to be called just before protected mode transition
-default_switch:
- cli # no interrupts allowed !
- movb $0x80, %al # disable NMI for bootup
- # sequence
- outb %al, $0x70
- lret
-
-
-#ifndef CONFIG_X86_VOYAGER
-# This routine tests whether or not A20 is enabled. If so, it
-# exits with zf = 0.
-#
-# The memory address used, 0x200, is the int $0x80 vector, which
-# should be safe.
-
-A20_TEST_ADDR = 4*0x80
-
-a20_test:
- pushw %cx
- pushw %ax
- xorw %cx, %cx
- movw %cx, %fs # Low memory
- decw %cx
- movw %cx, %gs # High memory area
- movw $A20_TEST_LOOPS, %cx
- movw %fs:(A20_TEST_ADDR), %ax
- pushw %ax
-a20_test_wait:
- incw %ax
- movw %ax, %fs:(A20_TEST_ADDR)
- call delay # Serialize and make delay constant
- cmpw %gs:(A20_TEST_ADDR+0x10), %ax
- loope a20_test_wait
-
- popw %fs:(A20_TEST_ADDR)
- popw %ax
- popw %cx
- ret
-
-#endif /* CONFIG_X86_VOYAGER */
-
-# This routine checks that the keyboard command queue is empty
-# (after emptying the output buffers)
-#
-# Some machines have delusions that the keyboard buffer is always full
-# with no keyboard attached...
-#
-# If there is no keyboard controller, we will usually get 0xff
-# to all the reads. With each IO taking a microsecond and
-# a timeout of 100,000 iterations, this can take about half a
-# second ("delay" == outb to port 0x80). That should be ok,
-# and should also be plenty of time for a real keyboard controller
-# to empty.
-#
-
-empty_8042:
- pushl %ecx
- movl $100000, %ecx
-
-empty_8042_loop:
- decl %ecx
- jz empty_8042_end_loop
-
- call delay
-
- inb $0x64, %al # 8042 status port
- testb $1, %al # output buffer?
- jz no_output
-
- call delay
- inb $0x60, %al # read it
- jmp empty_8042_loop
-
-no_output:
- testb $2, %al # is input buffer full?
- jnz empty_8042_loop # yes - loop
-empty_8042_end_loop:
- popl %ecx
- ret
-
-# Read the cmos clock. Return the seconds in al
-gettime:
- pushw %cx
- movb $0x02, %ah
- int $0x1a
- movb %dh, %al # %dh contains the seconds
- andb $0x0f, %al
- movb %dh, %ah
- movb $0x04, %cl
- shrb %cl, %ah
- aad
- popw %cx
- ret
-
-# Delay is needed after doing I/O
-delay:
- outb %al,$0x80
- ret
-
-# Descriptor tables
-#
-# NOTE: The intel manual says gdt should be sixteen bytes aligned for
-# efficiency reasons. However, there are machines which are known not
-# to boot with misaligned GDTs, so alter this at your peril! If you alter
-# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
-# empty GDT entries (one for NULL and one reserved).
-#
-# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
-# true for the Voyager Quad CPU card which will not boot without
-# This directive. 16 byte aligment is recommended by intel.
-#
- .align 16
-gdt:
- .fill GDT_ENTRY_BOOT_CS,8,0
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9A00 # code read/exec
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-gdt_end:
- .align 4
-
- .word 0 # alignment byte
-idt_48:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
- .word 0 # alignment byte
-gdt_48:
- .word gdt_end - gdt - 1 # gdt limit
- .word 0, 0 # gdt base (filled in later)
-
-#ifndef CONFIG_VGA_NOPROBE
-# Include video setup & detection code
-
-#include "video.S"
-#endif
-
-# Setup signature -- must be last
-setup_sig1: .word SIG1
-setup_sig2: .word SIG2
-
-# After this point, there is some free space which is used by the video mode
-# handling code to store the temporary mode table (not used by the kernel).
-
-modelist:
-
-.text
-endtext:
-.data
-enddata:
-.bss
-endbss:
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Wed Jun 20 08:26:53 2007
-#
-CONFIG_X86_32=y
-CONFIG_GENERIC_TIME=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_X86=y
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DMI=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor type and features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_SMP is not set
-CONFIG_X86_PC=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODEGX1 is not set
-CONFIG_MGEODE_LX=y
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
-CONFIG_X86_XADD=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_USE_3DNOW=y
-CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_MODEL=4
-# CONFIG_HPET_TIMER is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_MCE is not set
-# CONFIG_VM86 is not set
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-CONFIG_X86_REBOOTFIXUPS=y
-# CONFIG_MICROCODE is not set
-CONFIG_X86_MSR=y
-CONFIG_X86_CPUID=m
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-# CONFIG_DELL_RBU is not set
-# CONFIG_DCDBAS is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_NR_QUICK=1
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MTRR is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_VGA_NOPROBE is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x400000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x100000
-# CONFIG_COMPAT_VDSO is not set
-
-#
-# Power management options (ACPI, APM)
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-CONFIG_PM_DEBUG=y
-CONFIG_DISABLE_SUSPEND_VT_SWITCH=y
-# CONFIG_PM_TRACE is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-# CONFIG_ACPI is not set
-# CONFIG_APM is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOANY is not set
-CONFIG_PCI_GOOLPC=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_OLPC=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-CONFIG_GEODE_MFGPT_TIMER=y
-CONFIG_OLPC=y
-CONFIG_OLPC_PM=y
-CONFIG_OPEN_FIRMWARE=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_DIAG is not set
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_DEFAULT_BIC=y
-# CONFIG_DEFAULT_CUBIC is not set
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="bic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-# CONFIG_NETLABEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_SECMARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_NETLINK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-CONFIG_IP_NF_TARGET_LOG=m
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-# CONFIG_NET_ACT_IPT is not set
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_TS5500 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_CAFE=y
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IBM_ASM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=m
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDE_PROC_FS is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_BLK_DEV_CMD640 is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_IFB=m
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-CONFIG_NE2K_PCI=m
-CONFIG_8139CP=m
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_PRISM54_USB is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ACX_PCI is not set
-# CONFIG_ACX_USB is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-# CONFIG_MOUSE_PS2_ALPS is not set
-# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_OLPC=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_ITCO_WDT is not set
-# CONFIG_SC1200_WDT is not set
-# CONFIG_PC87413_WDT is not set
-# CONFIG_60XX_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_CPU5_WDT is not set
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
-CONFIG_HW_RANDOM_GEODE=y
-# CONFIG_HW_RANDOM_VIA is not set
-CONFIG_NVRAM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_NSC_GPIO is not set
-CONFIG_CS5535_GPIO=m
-# CONFIG_RAW_DRIVER is not set
-CONFIG_HANGCHECK_TIMER=m
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_SCx200_ACB=y
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_BATTERY_OLPC=y
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_OV7670=y
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-CONFIG_VIDEO_CAFE_CCIC=y
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_PROGEAR is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-CONFIG_VGASTATE=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_VGA16=m
-CONFIG_FB_VESA=y
-# CONFIG_FB_HECUBA is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I810 is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_INTEL is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_FB_GEODE_GX=y
-# CONFIG_FB_GEODE_GX1 is not set
-CONFIG_FB_OLPC_DCON=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FONT_SUN12x22=y
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-# CONFIG_SND_SERIAL_U16550 is not set
-CONFIG_SND_MPU401=m
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-CONFIG_SND_CS5535AUDIO=y
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-CONFIG_SND_ENS1370=m
-CONFIG_SND_ENS1371=m
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=m
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_AC97_POWER_SAVE=y
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_USX2Y=m
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-CONFIG_USB_PERSIST=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_KARMA is not set
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-# CONFIG_EDAC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Virtualization
-#
-# CONFIG_KVM is not set
-
-#
-# Sysprof
-#
-CONFIG_SYSPROF=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_PROMFS_FS=y
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-CONFIG_JFFS2_FS_SECURITY=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Instrumentation Support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_LIST=y
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DEBUG_STACK_USAGE=y
-
-#
-# Page alloc debug is incompatible with Software Suspend on i386
-#
-CONFIG_DEBUG_RODATA=y
-CONFIG_4KSTACKS=y
-CONFIG_DOUBLEFAULT=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_NETWORK_XFRM=y
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-# CONFIG_SECURITY_SELINUX_DISABLE is not set
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_AES_586=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-# CONFIG_CRYPTO_DEV_PADLOCK is not set
-CONFIG_CRYPTO_DEV_GEODE=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_KTIME_SCALAR=y
+++ /dev/null
-/* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
- *
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* The MFPGT timers on the CS5536 provide us with suitable timers to use
- * as clock event sources - not as good as a HPET or APIC, but certainly
- * better then the PIT. This isn't a general purpose MFGPT driver, but
- * a simplified one designed specifically to act as a clock event source.
- * For full details about the MFGPT, please consult the CS5536 data sheet.
-*/
-
-/* We are using the 32Khz input clock - its the only one that has the
- * ranges we find desirable. The following table lists the suitable
- * divisors and the associated hz, minimum interval
- * and the maximum interval:
-
- Divisor Hz Min Delta (S) Max Delta (S)
- 1 32000 .0005 2.048
- 2 16000 .001 4.096
- 4 8000 .002 8.192
- 8 4000 .004 16.384
- 16 2000 .008 32.768
- 32 1000 .016 65.536
- 64 500 .032 131.072
- 128 250 .064 262.144
- 256 125 .128 524.288
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <asm/geode.h>
-
-#include "do_timer.h"
-
-#define MFGPT_MAX_TIMERS 8
-
-#define F_AVAIL 0x01
-
-static struct mfgpt_timer_t {
- int flags;
- struct module *owner;
-} mfgpt_timers[MFGPT_MAX_TIMERS];
-
-/* Selected from the table above */
-
-#define MFGPT_DIVISOR 16
-#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
-#define MFGPT_HZ (32000 / MFGPT_DIVISOR)
-#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-static int __init mfgpt_timer_setup(void);
-#else
-#define mfgpt_timer_setup() (0)
-#endif
-
-/* Allow for disabling of MFGPTs */
-static int disable = 0;
-static int __init mfgpt_disable(char *s)
-{
- disable = 1;
- return 1;
-}
-__setup("nomfgpt", mfgpt_disable);
-
-/*
- * Check whether any MFGPTs are available for the kernel to use. In most
- * cases, firmware that uses AMD's VSA code will claim all timers during
- * bootup; we certainly don't want to take them if they're already in use.
- * In other cases (such as with VSAless OpenFirmware), the system firmware
- * leaves timers available for us to use.
- */
-int __init geode_mfgpt_detect(void)
-{
- int count = 0, i;
- u16 val;
-
- if (disable) {
- printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n");
- return 0;
- }
-
- for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
- val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
- if (!(val & MFGPT_SETUP_SETUP)) {
- mfgpt_timers[i].flags = F_AVAIL;
- count++;
- }
- }
-
- /* set up clock event device, if desired */
- i = mfgpt_timer_setup();
-
- return count;
-}
-
-int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
-{
- u32 msr, mask, value, dummy;
- int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
-
- if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- /*
- * The register maps for these are described in sections 6.17.1.x of
- * the AMD Geode CS5536 Companion Device Data Book.
- */
- switch(event) {
- case MFGPT_EVENT_RESET:
- /* XXX: According to the docs, we cannot reset timers above
- * 6; that is, resets for 7 and 8 will be ignored. Is this
- * a problem? */
- msr = MFGPT_NR_MSR;
- mask = 1 << (timer + 24);
- break;
-
- case MFGPT_EVENT_NMI:
- msr = MFGPT_NR_MSR;
- mask = 1 << (timer + shift);
- break;
-
- case MFGPT_EVENT_IRQ:
- msr = MFGPT_IRQ_MSR;
- mask = 1 << (timer + shift);
- break;
-
- default:
- return -EIO;
- }
-
- rdmsr(msr, value, dummy);
-
- if (enable)
- value |= mask;
- else
- value &= ~mask;
-
- wrmsr(msr, value, dummy);
- return 0;
-}
-EXPORT_SYMBOL(geode_mfgpt_toggle_event);
-
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
-{
- u32 val, dummy;
- int offset;
-
- if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
- return -EIO;
-
- rdmsr(0x51400022, val, dummy);
-
- offset = (timer % 4) * 4;
-
- val &= ~((0xF << offset) | (0xF << (offset + 16)));
-
- if (enable) {
- val |= (irq & 0x0F) << (offset);
- val |= (irq & 0x0F) << (offset + 16);
- }
-
- wrmsr(0x51400022, val, dummy);
- return 0;
-}
-EXPORT_SYMBOL(geode_mfgpt_set_irq);
-
-static int mfgpt_get(int timer, struct module *owner)
-{
- mfgpt_timers[timer].flags &= ~F_AVAIL;
- mfgpt_timers[timer].owner = owner;
- printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
- return timer;
-}
-
-int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner)
-{
- int i;
-
- if (!geode_get_dev_base(GEODE_DEV_MFGPT))
- return -ENODEV;
- if (timer >= MFGPT_MAX_TIMERS)
- return -EIO;
-
- if (timer < 0) {
- /* Try to find an available timer */
- for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
- if (mfgpt_timers[i].flags & F_AVAIL)
- return mfgpt_get(i, owner);
-
- if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
- break;
- }
- }
- else {
- /* If they requested a specific timer, try to honor that */
- if (mfgpt_timers[timer].flags & F_AVAIL)
- return mfgpt_get(timer, owner);
- }
-
- /* No timers available - too bad */
- return -1;
-}
-EXPORT_SYMBOL(geode_mfgpt_alloc_timer);
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-
-static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
-static u16 mfgpt_event_clock;
-
-static int irq = 7;
-static int __init mfgpt_setup(char *str)
-{
- get_option(&str, &irq);
- return 1;
-}
-__setup("mfgpt_irq=", mfgpt_setup);
-
-static inline void mfgpt_disable_timer(u16 clock)
-{
- u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP);
- geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN);
-}
-
-static int mfgpt_next_event(unsigned long, struct clock_event_device *);
-static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
-
-static struct clock_event_device mfgpt_clockevent = {
- .name = "mfgpt-timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = mfgpt_set_mode,
- .set_next_event = mfgpt_next_event,
- .rating = 250,
- .cpumask = CPU_MASK_ALL,
- .shift = 32
-};
-
-static inline void mfgpt_start_timer(u16 clock, u16 delta)
-{
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-}
-
-static void mfgpt_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- mfgpt_disable_timer(mfgpt_event_clock);
-
- if (mode == CLOCK_EVT_MODE_PERIODIC)
- mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC);
-
- mfgpt_tick_mode = mode;
-}
-
-static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
-{
- mfgpt_start_timer(mfgpt_event_clock, delta);
- return 0;
-}
-
-/* Assume (foolishly?), that this interrupt was due to our tick */
-
-static irqreturn_t mfgpt_tick(int irq, void *dev_id)
-{
- if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
- return IRQ_HANDLED;
-
- /* Turn off the clock */
- mfgpt_disable_timer(mfgpt_event_clock);
-
- /* Clear the counter */
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
-
- /* Restart the clock in periodic mode */
-
- if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
- }
-
- mfgpt_clockevent.event_handler(&mfgpt_clockevent);
- return IRQ_HANDLED;
-}
-
-static struct irqaction mfgptirq = {
- .handler = mfgpt_tick,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
- .mask = CPU_MASK_NONE,
- .name = "mfgpt-timer"
-};
-
-static int __init mfgpt_timer_setup(void)
-{
- int timer, ret;
- u16 val;
-
- timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, THIS_MODULE);
- if (timer < 0) {
- printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT timer\n");
- return -ENODEV;
- }
-
- mfgpt_event_clock = timer;
- /* Set the clock scale and enable the event mode for CMP2 */
- val = MFGPT_SCALE | (3 << 8);
-
- geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
-
- /* Set up the IRQ on the MFGPT side */
- if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
- printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
- return -EIO;
- }
-
- /* And register it with the kernel */
- ret = setup_irq(irq, &mfgptirq);
-
- if (ret) {
- printk(KERN_ERR "mfgpt-timer: Unable to set up the interrupt.\n");
- goto err;
- }
-
- /* Set up the clock event */
- mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32);
- mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &mfgpt_clockevent);
- mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, &mfgpt_clockevent);
-
- printk("mfgpt-timer: registering the MFGT timer as a clock event.\n");
- clockevents_register_device(&mfgpt_clockevent);
-
- return 0;
-
-err:
- geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
- printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n");
- return -EIO;
-}
-
-#endif
+++ /dev/null
-/*
- * ofw.c - Open Firmware client interface for 32-bit systems.
- * This code is intended to be portable to any 32-bit Open Firmware
- * implementation with a standard client interface that can be
- * called when Linux is running.
- *
- * Copyright (C) 2007 Mitch Bradley <wmb@firmworks.com>
- * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
- */
-
-#include <stdarg.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/ofw.h>
-
-
-int (*call_firmware)(int *);
-
-static DEFINE_SPINLOCK(prom_lock);
-
-#define MAXARGS 20
-
-/*
- * The return value from ofw() in all cases is 0 if the attempt to call the
- * function succeeded, <0 otherwise. That return value is from the
- * gateway function only. Any results from the called function are returned
- * via output argument pointers.
- *
- * Here are call templates for all the standard OFW client services:
- *
- * ofw("test", 1, 1, namestr, &missing);
- * ofw("peer", 1, 1, phandle, &sibling_phandle);
- * ofw("child", 1, 1, phandle, &child_phandle);
- * ofw("parent", 1, 1, phandle, &parent_phandle);
- * ofw("instance_to_package", 1, 1, ihandle, &phandle);
- * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
- * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
- * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
- * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
- * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
- * ofw("finddevice", 1, 1, devspecstr, &phandle);
- * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
- * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
- * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
- * ofw("open", 1, 1, devspecstr, &ihandle);
- * ofw("close", 1, 0, ihandle);
- * ofw("read", 3, 1, ihandle, addr, len, &actual);
- * ofw("write", 3, 1, ihandle, addr, len, &actual);
- * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
- * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
- * ofw("release", 2, 0, virtaddr, size);
- * ofw("boot", 1, 0, bootspecstr);
- * ofw("enter", 0, 0);
- * ofw("exit", 0, 0);
- * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
- * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
- * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
- * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
- * ofw("milliseconds", 0, 1, &ms);
- */
-
-int ofw(char *name, int numargs, int numres, ...)
-{
- va_list ap;
- int argarray[MAXARGS+3];
- int argnum = 3;
- int retval;
- int *intp;
- unsigned long flags;
-
- if (!call_firmware)
- return -1;
- if ((numargs + numres) > MAXARGS)
- return -1; /* spit out an error? */
-
- argarray[0] = (int) name;
- argarray[1] = numargs;
- argarray[2] = numres;
-
- va_start(ap, numres);
- while (numargs) {
- argarray[argnum++] = va_arg(ap, int);
- numargs--;
- }
-
- spin_lock_irqsave(&prom_lock, flags);
- retval = call_firmware(argarray);
- spin_unlock_irqrestore(&prom_lock, flags);
-
- if (retval == 0) {
- while (numres) {
- intp = va_arg(ap, int *);
- *intp = argarray[argnum++];
- numres--;
- }
- }
- va_end(ap);
- return retval;
-}
-EXPORT_SYMBOL(ofw);
+++ /dev/null
-/* olpc-pm.c
- * © 2006 Red Hat, Inc.
- * Portions also copyright 2006 Advanced Micro Devices, Inc.
- * GPLv2
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/suspend.h>
-#include <linux/bootmem.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/mc146818rtc.h>
-#include <asm/io.h>
-
-#include <asm/olpc.h>
-
-/* A few words about accessing the ACPI and PM registers. Long story short,
- byte and word accesses of the ACPI and PM registers is broken. The only
- way to do it really correctly is to use dword accesses, which we do
- throughout this code. For more details, please consult Eratta 17 and 18
- here:
-
- http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
-*/
-
-#define PM_IRQ 3
-
-#define CS5536_PM_PWRBTN (1 << 8)
-#define CS5536_PM_RTC (1 << 10)
-
-#define GPIO_WAKEUP_EC (1 << 31)
-#define GPIO_WAKEUP_LID (1 << 30)
-
-#define PM_MODE_NORMAL 0
-#define PM_MODE_TEST 1
-#define PM_MODE_MAX 2
-
-/* These, and the battery EC commands, should be in an olpc.h. */
-#define EC_WRITE_SCI_MASK 0x1b
-#define EC_READ_SCI_MASK 0x1c
-
-extern void do_olpc_suspend_lowlevel(void);
-
-static struct {
- unsigned long address;
- unsigned short segment;
-} ofw_bios_entry = { 0, __KERNEL_CS };
-
-static int olpc_pm_mode = PM_MODE_NORMAL;
-static unsigned long acpi_base;
-static unsigned long pms_base;
-static int sci_irq;
-static int olpc_lid_flag;
-
-static struct input_dev *pm_inputdev;
-static struct input_dev *lid_inputdev;
-static struct input_dev *ebook_inputdev;
-static struct pm_ops olpc_pm_ops;
-
-static int gpio_wake_events = 0;
-static int ebook_state = -1;
-static u16 olpc_wakeup_mask = 0;
-
-struct platform_device olpc_powerbutton_dev = {
- .name = "powerbutton",
- .id = -1,
-};
-
-struct platform_device olpc_lid_dev = {
- .name = "lid",
- .id = -1,
-};
-
-static void __init init_ebook_state(void)
-{
- if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
- printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n");
- ebook_state = 0;
- }
- ebook_state &= 1;
-
- /* the input layer needs to know what value to default to as well */
- input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
- input_sync(ebook_inputdev);
-}
-
-static void (*battery_callback)(unsigned long);
-static DEFINE_SPINLOCK(battery_callback_lock);
-
-/* propagate_events is non-NULL if run from workqueue,
- NULL when called at init time to flush SCI queue */
-static void process_sci_queue(struct work_struct *propagate_events)
-{
- unsigned char data = 0;
- unsigned char battery_events = 0;
- int ret;
-
- do {
- ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
- if (!ret) {
- printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n",
- data);
-
- switch (data) {
- case EC_SCI_SRC_EMPTY:
- case EC_SCI_SRC_GAME:
- case EC_SCI_SRC_WLAN:
- /* we ignore these for now */
- break;
- case EC_SCI_SRC_BATERR:
- printk(KERN_ERR "olpc-pm: Battery Management System detected an error! Remove turnip from battery slot.\n");
- case EC_SCI_SRC_BATSOC:
- case EC_SCI_SRC_BATTERY:
- case EC_SCI_SRC_ACPWR:
- battery_events |= data;
- break;
- case EC_SCI_SRC_EBOOK:
- ebook_state = !ebook_state;
- if (propagate_events) {
- input_report_switch(ebook_inputdev,
- SW_TABLET_MODE, ebook_state);
- input_sync(ebook_inputdev);
- }
- break;
- default:
- printk(KERN_ERR "olpc-pm: Unknown SCI event 0x%x occurred!\n", data);
- }
- }
- } while (data && !ret);
-
- if (battery_events && battery_callback && propagate_events) {
- void (*cbk)(unsigned long);
-
- /* Older EC versions didn't distinguish between AC and battery
- events */
- if (olpc_platform_info.ecver < 0x45)
- battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
-
- spin_lock(&battery_callback_lock);
- cbk = battery_callback;
- spin_unlock(&battery_callback_lock);
-
- cbk(battery_events);
- }
-
- if (ret)
- printk(KERN_WARNING "Failed to clear SCI queue!\n");
-}
-
-static DECLARE_WORK(sci_work, process_sci_queue);
-
-void olpc_register_battery_callback(void (*f)(unsigned long))
-{
- spin_lock(&battery_callback_lock);
- battery_callback = f;
- spin_unlock(&battery_callback_lock);
-}
-EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
-
-void olpc_deregister_battery_callback(void)
-{
- spin_lock(&battery_callback_lock);
- battery_callback = NULL;
- spin_unlock(&battery_callback_lock);
- cancel_work_sync(&sci_work);
-}
-EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
-
-
-static int olpc_pm_interrupt(int irq, void *id)
-{
- uint32_t sts, gpe = 0;
-
- sts = inl(acpi_base + PM1_STS);
- outl(sts | 0xFFFF, acpi_base + PM1_STS);
-
- if (olpc_get_rev() >= OLPC_REV_B2) {
- gpe = inl(acpi_base + PM_GPE0_STS);
- outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
- }
-
- if (sts & CS5536_PM_PWRBTN) {
- input_report_key(pm_inputdev, KEY_POWER, 1);
- input_sync(pm_inputdev);
- printk(KERN_DEBUG "olpm-pm: PM_PWRBTN event received\n");
- /* Do we need to delay this (and hence schedule_work)? */
- input_report_key(pm_inputdev, KEY_POWER, 0);
- input_sync(pm_inputdev);
- }
-
- if (gpe & GPIO_WAKEUP_EC) {
- geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
- schedule_work(&sci_work);
- }
-
- if (gpe & GPIO_WAKEUP_LID) {
- /* Disable events */
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
-
- /* Clear the edge */
-
- if (olpc_lid_flag)
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- else
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- /* Clear the status too */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
-
- /* The line is high when the LID is open, but SW_LID
- * should be high when the LID is closed, so we pass the old
- * value of olpc_lid_flag
- */
-
- input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
- input_sync(lid_inputdev);
-
- /* Swap the status */
- olpc_lid_flag = !olpc_lid_flag;
-
- if (olpc_lid_flag)
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- else
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- /* re-enable the event */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * For now, only support STR. We also don't support suspending on
- * B1s, due to difficulties with the cafe FPGA.
- */
-static int olpc_pm_state_valid(suspend_state_t pm_state)
-{
- if (pm_state == PM_SUSPEND_MEM && olpc_rev_after(OLPC_REV_B1))
- return 1;
-
- return 0;
-}
-
-/* This is a catchall function for operations that just don't belong
- * anywhere else. Later we will evaluate if these belong in the
- * individual device drivers or the firmware.
- * If you add something to this function, please explain yourself with
- * a comment.
- */
-
-extern void gxfb_flatpanel_control(int state);
-
-static u32 gpio_wakeup[2];
-static u64 irq_sources[4];
-static u64 mfgpt_irq_msr, mfgpt_nr_msr;
-
-void olpc_fixup_wakeup(void)
-{
- u32 base = geode_gpio_base();
- int i;
-
- /* This clears any pending events from the status register -
- * the firmware also does this, but its possible that it tries
- * it too early before the key has a chance to debounce
- */
-
- outl((CS5536_PM_PWRBTN << 16) | 0xFFFF, acpi_base + PM1_STS);
-
- /* Enable the flatpanel sequencing as early as possible, because
- it takes ~64ms to resume. This probably belongs in the firmware */
-
- //gxfb_flatpanel_control(1);
-
- /* Restore the interrupt sources */
- wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
- wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
- wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
- wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
-
- /* Restore the X and Y sources for GPIO */
- outl(gpio_wakeup[0], base + GPIO_MAP_X);
- outl(gpio_wakeup[1], base + GPIO_MAP_Y);
-
- /* Resture the MFGPT MSRs */
- wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
- wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
-
- for (i=0;i<2;i++) {
- /* tell the wireless module to restart USB communication */
- olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
- }
-}
-
-void olpc_fixup_sleep(void)
-{
- u32 base = geode_gpio_base();
- int i;
-
- /* Save the X and Y sources for GPIO */
- gpio_wakeup[0] = inl(base + GPIO_MAP_X);
- gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
-
- /* Save the Y and Z unrestricted sources */
-
- rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
- rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
- rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
- rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
-
- /* Turn off the MFGPT timers on the way down */
-
- for(i = 0; i < 8; i++) {
- u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
-
- if (val & MFGPT_SETUP_SETUP) {
- val &= ~MFGPT_SETUP_CNTEN;
- geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
- }
- }
-
- /* Save the MFGPT MSRs */
- rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
- rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
-
- if (device_may_wakeup(&olpc_powerbutton_dev.dev))
- olpc_wakeup_mask |= CS5536_PM_PWRBTN;
- else
- olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
-
- if (device_may_wakeup(&olpc_lid_dev.dev)) {
- geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- gpio_wake_events |= GPIO_WAKEUP_LID;
- } else {
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- gpio_wake_events &= ~(GPIO_WAKEUP_LID);
- }
-}
-
-static int olpc_pm_enter(suspend_state_t pm_state)
-{
- /* Only STR is supported */
- if (pm_state != PM_SUSPEND_MEM)
- return -EINVAL;
-
- olpc_fixup_sleep();
-
- /* Set the GPIO wakeup bits */
- outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
- outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-
- /* Save CPU state */
- do_olpc_suspend_lowlevel();
-
- olpc_fixup_wakeup();
-
- /* Restore the SCI wakeup events */
- outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
-
- return 0;
-}
-
-int asmlinkage olpc_do_sleep(u8 sleep_state)
-{
- void *pgd_addr = __va(read_cr3());
- printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
- * that gcc doesn't optimize
- * away our __va! */
- /* FIXME: Set the SCI bits we want to wake up on here */
-
- /* FIXME: Set any other SCI events that we might want here */
-
- outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
-
- /* If we are in test mode, then just return (simulate a successful
- suspend/resume). Otherwise, if we are doing the real thing,
- then go for the gusto */
-
- if (olpc_pm_mode != PM_MODE_TEST) {
- __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
- __asm__("call *(%%edi); cld"
- : : "D" (&ofw_bios_entry));
- }
-
- return 0;
-}
-
-/* This code will slowly disappear as we fixup the issues in the BIOS */
-
-static void __init olpc_fixup_bios(void)
-{
- unsigned long hi, lo;
-
- if (olpc_has_vsa()) {
- /* The VSA aggressively sets up the ACPI and PM register for
- * trapping - its not enough to force these values in the BIOS -
- * they seem to be changed during PCI init as well.
- */
-
- /* Change the PM registers to decode to the DD */
-
- rdmsr(0x510100e2, lo, hi);
- hi |= 0x80000000;
- wrmsr(0x510100e2, lo, hi);
-
- /* Change the ACPI registers to decode to the DD */
-
- rdmsr(0x510100e3, lo, hi);
- hi |= 0x80000000;
- wrmsr(0x510100e3, lo, hi);
- }
-
- /* GPIO24 controls WORK_AUX */
-
- geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
- geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
-
- if (olpc_get_rev() >= OLPC_REV_B2) {
- /* GPIO10 is connected to the thermal alarm */
- geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
- geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
-
- /* Set up to get LID events */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
-
- /* Clear edge detection and event enable for now */
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
-
- /* Set the LID to cause an PME event on group 6 */
- geode_gpio_event_pme(OLPC_GPIO_LID, 6);
-
- /* Set PME group 6 to fire the SCI interrupt */
- geode_gpio_set_irq(6, sci_irq);
- }
-
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
-
- /* Clear pending events */
-
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
-
- //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
- geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
-
- /* Set the SCI to cause a PME event on group 7 */
- geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
-
- /* And have group 6 also fire the SCI interrupt */
- geode_gpio_set_irq(7, sci_irq);
-}
-
-/* This provides a control file for setting up testing of the
- power management system. For now, there is just one setting:
- "test" which means that we don't actually enter the power
- off routine.
-*/
-
-static const char * const pm_states[] = {
- [PM_MODE_NORMAL] = "normal",
- [PM_MODE_TEST] = "test",
-};
-
-extern struct mutex pm_mutex;
-extern struct kset power_subsys;
-
-static ssize_t control_show(struct kset *s, char *buf)
-{
- return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
-}
-
-static ssize_t control_store(struct kset *s, const char *buf, size_t n)
-{
- int i, len;
- char *p;
-
- p = memchr(buf, '\n', n);
- len = p ? p - buf : n;
-
- /* Grab the mutex */
- mutex_lock(&pm_mutex);
-
- for(i = 0; i < PM_MODE_MAX; i++) {
- if (!strncmp(buf, pm_states[i], len)) {
- olpc_pm_mode = i;
- break;
- }
- }
-
- mutex_unlock(&pm_mutex);
-
- return (i == PM_MODE_MAX) ? -EINVAL : n;
-}
-
-static struct subsys_attribute control_attr = {
- .attr = {
- .name = "olpc-pm",
- .mode = 0644,
- },
- .show = control_show,
- .store = control_store,
-};
-
-static struct attribute * olpc_attributes[] = {
- &control_attr.attr,
- NULL
-};
-
-static struct attribute_group olpc_attrs = {
- .attrs = olpc_attributes,
-};
-
-static int __init alloc_inputdevs(void)
-{
- int ret = -ENOMEM;
-
- pm_inputdev = input_allocate_device();
- if (!pm_inputdev)
- goto err;
-
- pm_inputdev->name = "OLPC PM";
- pm_inputdev->phys = "olpc_pm/input0";
- set_bit(EV_KEY, pm_inputdev->evbit);
- set_bit(KEY_POWER, pm_inputdev->keybit);
-
- ret = input_register_device(pm_inputdev);
- if (ret) {
- printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret);
- goto err;
- }
-
- lid_inputdev = input_allocate_device();
- if (!lid_inputdev)
- goto err;
-
- lid_inputdev->name = "OLPC lid switch";
- lid_inputdev->phys = "olpc_pm/input1";
- set_bit(EV_SW, lid_inputdev->evbit);
- set_bit(SW_LID, lid_inputdev->swbit);
-
- ret = input_register_device(lid_inputdev);
- if (ret) {
- printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret);
- goto err;
- }
-
- ebook_inputdev = input_allocate_device();
- if (!ebook_inputdev)
- goto err;
-
- ebook_inputdev->name = "OLPC ebook switch";
- ebook_inputdev->phys = "olpc_pm/input2";
- set_bit(EV_SW, ebook_inputdev->evbit);
- set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
-
- ret = input_register_device(ebook_inputdev);
- if (ret) {
- printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret);
- goto err;
- }
-
- return ret;
-err:
- if (ebook_inputdev) {
- input_unregister_device(ebook_inputdev);
- ebook_inputdev = NULL;
- }
- if (lid_inputdev) {
- input_unregister_device(lid_inputdev);
- lid_inputdev = NULL;
- }
- if (pm_inputdev) {
- input_unregister_device(pm_inputdev);
- pm_inputdev = NULL;
- }
-
- return ret;
-}
-
-static int __init olpc_pm_init(void)
-{
- uint32_t lo, hi;
- int ret;
- uint8_t ec_byte;
-
- if (!machine_is_olpc())
- return -ENODEV;
-
- acpi_base = geode_acpi_base();
- pms_base = geode_pms_base();
-
- if (!acpi_base || !pms_base)
- return -ENODEV;
-
- ret = alloc_inputdevs();
- if (ret)
- return ret;
-
- rdmsr(0x51400020, lo, hi);
- sci_irq = (lo >> 20) & 15;
-
- if (sci_irq) {
- printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
- } else {
- /* Zero doesn't mean zero -- it means masked */
- printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
- sci_irq = 3;
- lo |= 0x00300000;
- wrmsrl(0x51400020, lo);
- }
-
- olpc_fixup_bios();
-
- lo = inl(pms_base + PM_FSD);
-
- /* Lock, enable failsafe, 4 seconds */
- outl(0xc001f400, pms_base + PM_FSD);
-
- /* Here we set up the SCI events we're interested in during
- * real-time. We have no sleep button, and the RTC doesn't make
- * sense, so set up the power button
- */
-
- outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
-
- if (olpc_get_rev() >= OLPC_REV_B2) {
- gpio_wake_events |= GPIO_WAKEUP_LID;
-
- /* Get the current value of the GPIO, and set up the edges */
- olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
-
- /* Watch for the opposite edge */
-
- if (olpc_lid_flag)
- geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
- else
- geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
-
- /* Enable the event */
- geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
- }
-
- /* Set up the mask for wakeups the EC will generate SCIs on */
-
- ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &ec_byte, 1);
- if (ret)
- printk(KERN_ERR "Error getting the EC SCI mask: %d\n", ret);
-
- /* Disable battery 1% charge wakeups */
- ec_byte &= ~EC_SCI_SRC_BATSOC;
-
- ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &ec_byte, 1, NULL, 0);
- if (ret)
- printk(KERN_ERR "Error setting the EC SCI mask: %d\n", ret);
-
- /* Set up the EC SCI */
-
- gpio_wake_events |= GPIO_WAKEUP_EC;
-
- outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
- outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
-
- /* Select level triggered in PIC */
-
- if (sci_irq < 8) {
- lo = inb(0x4d0);
- lo |= 1 << sci_irq;
- outb(lo, 0x4d0);
- } else {
- lo = inb(0x4d1);
- lo |= 1 << (sci_irq - 8);
- outb(lo, 0x4d1);
- }
- /* Clear pending interrupt */
- outl(inl(acpi_base) | 0xFFFF, acpi_base);
- process_sci_queue(0); /* we just want to flush the queue here */
- init_ebook_state();
-
- /* Enable the interrupt */
-
- ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
-
- if (ret) {
- printk(KERN_ERR "Error registering SCI: %d\n", ret);
- return ret;
- }
-
- ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
- pm_set_ops(&olpc_pm_ops);
-
- sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
-
- return 0;
-}
-
-
-#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
-struct resource rtc_platform_resource[2] = {
- {
- .flags = IORESOURCE_IO,
- .start = RTC_PORT(0),
- .end = RTC_PORT(0) + RTC_IO_EXTENT
- },
- {
- .flags = IORESOURCE_IRQ,
- .start = 8,
- .end = 8,
- },
-};
-
-
-static void rtc_wake_on(struct device *dev)
-{
- olpc_wakeup_mask |= CS5536_PM_RTC;
-}
-
-static void rtc_wake_off(struct device *dev)
-{
- olpc_wakeup_mask &= ~(CS5536_PM_RTC);
-}
-
-static struct cmos_rtc_board_info rtc_info = {
- .rtc_day_alarm = 0,
- .rtc_mon_alarm = 0,
- .rtc_century = 0,
- .wake_on = rtc_wake_on,
- .wake_off = rtc_wake_off,
-};
-
-struct platform_device olpc_rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_platform_resource),
- .dev.platform_data = &rtc_info,
- .resource = rtc_platform_resource,
-};
-
-static int __init olpc_platform_init(void)
-{
- (void)platform_device_register(&olpc_rtc_device);
- device_init_wakeup(&olpc_rtc_device.dev, 1);
-
- (void)platform_device_register(&olpc_powerbutton_dev);
- device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
-
- (void)platform_device_register(&olpc_lid_dev);
- device_init_wakeup(&olpc_lid_dev.dev, 1);
-
- return 0;
-}
-arch_initcall(olpc_platform_init);
-#endif /* CONFIG_RTC_DRV_CMOS */
-
-static void olpc_pm_exit(void)
-{
- /* Clear any pending events, and disable them */
- outl(0xFFFF, acpi_base+2);
-
- free_irq(sci_irq, &acpi_base);
- input_unregister_device(pm_inputdev);
- input_unregister_device(lid_inputdev);
- input_unregister_device(ebook_inputdev);
-}
-
-static struct pm_ops olpc_pm_ops = {
- .valid = olpc_pm_state_valid,
- .enter = olpc_pm_enter,
-};
-
-module_init(olpc_pm_init);
-module_exit(olpc_pm_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
+++ /dev/null
-.text
-
-ENTRY(olpc_sleep_asm)
-olpc_sleep:
- ;; Get the value of PM1_CNT and store it off
-
- add 08h, ax
- mov bx,dx
- in dx,eax
- or 2000h, ax
- mov ax,di
-
- ;; flush the cache
- wbinvd
-
- ;; GX2 must disable refresh before going into self-refresh
- mov 2000000180xh, ecx
- rdmsr
- mov eax, esi
- and 0FF0000FFh, eax
- wrmsr
-
- ;; Now, put the memory into self refresh
- mov 2004, cx
- xor edx, edx
- xor eax, eax
- mov 04h, al
- wrmsr
-
- ;; Thats all she wrote - time to go to sleep
-
- mov bx, dx
- movzx di, eax
- out eax, dx
-
- ;;
-
-
-
+++ /dev/null
-.text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-
-ALIGN
- .align 4096
-
-wakeup_start:
-# jmp wakeup_start
-
- cli
- cld
-
- # Clear any dangerous flags
-
- pushl $0
- popfl
-
- # Set up %cr3
- movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
- movl %eax, %cr3
-
- movl saved_cr4, %eax
- movl %eax, %cr4
-
- movl saved_cr0, %eax
- movl %eax, %cr0
-
- jmp 1f
-1:
- ljmpl $__KERNEL_CS,$wakeup_return
-
-
-.org 0x1000
-
-wakeup_return:
- movw $__KERNEL_DS, %ax
- movw %ax, %ss
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %fs
- movw %ax, %gs
-
- lgdt saved_gdt
- lidt saved_idt
- lldt saved_ldt
- ljmp $(__KERNEL_CS),$1f
-1:
- movl %cr3, %eax
- movl %eax, %cr3
- wbinvd
-
- # Go back to the return point
- jmp ret_point
-
-save_registers:
- sgdt saved_gdt
- sidt saved_idt
- sldt saved_ldt
-
- pushl %edx
- movl %cr4, %edx
- movl %edx, saved_cr4
-
- movl %cr0, %edx
- movl %edx, saved_cr0
-
- popl %edx
-
-
- movl %ebx, saved_context_ebx
- movl %ebp, saved_context_ebp
- movl %esi, saved_context_esi
- movl %edi, saved_context_edi
-
- pushfl
- popl saved_context_eflags
-
- ret
-
-
-restore_registers:
- movl saved_context_ebp, %ebp
- movl saved_context_ebx, %ebx
- movl saved_context_esi, %esi
- movl saved_context_edi, %edi
-
- pushl saved_context_eflags
- popfl
-
- ret
-
-
-ENTRY(do_olpc_suspend_lowlevel)
- call save_processor_state
- call save_registers
-
- # This is the stack context we want to remember
- movl %esp, saved_context_esp
-
- pushl $3
- call olpc_do_sleep
-
- jmp wakeup_start
- .p2align 4,,7
-ret_point:
- movl saved_context_esp, %esp
-
- call restore_registers
- call restore_processor_state
- ret
-
-.data
-ALIGN
-
-saved_gdt: .long 0,0
-saved_idt: .long 0,0
-saved_ldt: .long 0
-saved_cr4: .long 0
-saved_cr0: .long 0
-
+++ /dev/null
-/* Support for the OLPC DCON and OLPC EC access
- * Copyright (C) 2006, Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-
-#include <asm/olpc.h>
-#include <asm/ofw.h>
-
-/* This is our new multi-purpose structure used to contain the
- * information about the platform that we detect
- */
-
-struct olpc_platform_t olpc_platform_info;
-EXPORT_SYMBOL_GPL(olpc_platform_info);
-
-/*********************************************************************
- * EC locking and access
- *********************************************************************/
-
-static DEFINE_SPINLOCK(ec_lock);
-
-/* what the timeout *should* be (in ms) */
-#define EC_BASE_TIMEOUT 20
-
-/* the timeout that bugs in the EC might force us to actually use */
-static int ec_timeout = EC_BASE_TIMEOUT;
-
-static int __init olpc_ec_timeout_set(char *str)
-{
- if (get_option(&str, &ec_timeout) != 1) {
- ec_timeout = EC_BASE_TIMEOUT;
- printk(KERN_ERR "olpc-ec: invalid argument to "
- "'olpc_ec_timeout=', ignoring!\n");
- }
- printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
- ec_timeout);
- return 1;
-}
-__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
-
-/*
- * These *bf_status functions return whether the buffers are full or not.
- */
-
-static inline unsigned int ibf_status(unsigned int port)
-{
- return inb(port) & 0x02;
-}
-
-static inline unsigned int obf_status(unsigned int port)
-{
- return inb(port) & 0x01;
-}
-
-#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
-static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
-{
- unsigned int timeo;
- int state = ibf_status(port);
-
- for (timeo = ec_timeout; state != desired && timeo; timeo--) {
- mdelay(1);
- state = ibf_status(port);
- }
-
- if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
- timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
- printk(KERN_WARNING "olpc-ec: waited %u ms for IBF (%d)!\n",
- EC_BASE_TIMEOUT-timeo, line);
- }
-
- return !(state == desired);
-}
-
-#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
-static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
-{
- unsigned int timeo;
- int state = obf_status(port);
-
- for (timeo = ec_timeout; state != desired && timeo; timeo--) {
- mdelay(1);
- state = obf_status(port);
- }
-
- if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
- timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
- printk(KERN_WARNING "olpc-ec: waited %u ms for OBF (%d)!\n",
- EC_BASE_TIMEOUT-timeo, line);
- }
-
- return !(state == desired);
-}
-
-int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen)
-{
- unsigned long flags;
- int ret = -EIO;
- int i;
-
- spin_lock_irqsave(&ec_lock, flags);
-
- if (wait_on_ibf(0x6c, 0)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
- "quiesce!\n");
- goto err;
- }
-
-restart:
- /*
- * Note that if we time out during any IBF checks, that's a failure;
- * we have to return. There's no way for the kernel to clear that.
- *
- * If we time out during an OBF check, we can restart the command;
- * reissuing it will clear the OBF flag, and we should be alright.
- * The OBF flag will sometimes misbehave due to what we believe
- * is a hardware quirk..
- */
- printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd);
- outb(cmd, 0x6c);
-
- if (wait_on_ibf(0x6c, 0)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
- "command!\n");
- goto err;
- }
-
- if (inbuf && inlen) {
- /* write data to EC */
- for (i = 0; i < inlen; i++) {
- if (wait_on_ibf(0x6c, 0)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for"
- " EC accept data!\n");
- goto err;
- }
- printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n",
- inbuf[i]);
- outb(inbuf[i], 0x68);
- }
- }
- if (outbuf && outlen) {
- /* read data from EC */
- for (i = 0; i < outlen; i++) {
- if (wait_on_obf(0x6c, 1)) {
- printk(KERN_ERR "olpc-ec: timeout waiting for"
- " EC to provide data!\n");
- goto restart;
- }
- outbuf[i] = inb(0x68);
- printk(KERN_DEBUG "olpc-ec: received 0x%x\n",
- outbuf[i]);
- }
- }
-
- ret = 0;
-err:
- spin_unlock_irqrestore(&ec_lock, flags);
- return ret;
-}
-EXPORT_SYMBOL_GPL(olpc_ec_cmd);
-
-/*********************************************************************
- * DCON stuff
- *********************************************************************/
-
-static void olpc_power_off(void)
-{
- printk(KERN_INFO "OLPC power off sequence...\n");
- outb(0xff, 0x381);
- outb(0x14, 0x382);
- outb(0x01, 0x383);
- outb(0xff, 0x381);
- outb(0x14, 0x382);
- outb(0x00, 0x383);
-}
-
-static void __init
-ec_detect(void)
-{
- olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
-}
-
-/* Check to see if this version of the OLPC board has VSA built
- * in, and set a flag
- */
-
-static void __init vsa_detect(void)
-{
- u16 rev;
-
- outw(0xFC53, 0xAC1C);
- outw(0x0003, 0xAC1C);
-
- rev = inw(0xAC1E);
-
- if (rev == 0x4132)
- olpc_platform_info.flags |= OLPC_F_VSA;
-}
-
-/* Map OFW revisions to what OLPC_REV_* */
-static const char __initdata *olpc_boardrev_str[] = {
- "A1",
- "preB1",
- "B1",
- "preB2",
- "B2",
- "preB3",
- "B3",
- "B4",
- "C1",
- "R1",
-};
-
-static void __init platform_detect(char *revision, size_t len)
-{
- size_t propsize;
- int i;
-
- BUG_ON(ARRAY_SIZE(olpc_boardrev_str) != OLPC_REV_UNKNOWN);
-
- if (ofw("getprop", 4, 1, NULL, "model", revision, len, &propsize)) {
- printk(KERN_ERR "ofw: getprop call failed!\n");
- goto failed;
- }
- if (len < propsize) {
- printk(KERN_ERR "ofw: revision string is too long!\n");
- goto failed;
- }
-
- for (i=0; i < ARRAY_SIZE(olpc_boardrev_str); i++) {
- if (strcmp(revision, olpc_boardrev_str[i]) == 0) {
- olpc_platform_info.boardrev = i;
- return;
- }
- }
-
-failed:
- strncpy(revision, "Unknown", len);
- olpc_platform_info.boardrev = OLPC_REV_UNKNOWN;
-}
-
-static int olpc_dcon_present = -1;
-module_param(olpc_dcon_present, int, 0444);
-
-/* REV_A CMOS map:
- * bit 440; DCON present bit
- */
-
-#define OLPC_CMOS_DCON_OFFSET (440 / 8)
-#define OLPC_CMOS_DCON_MASK 0x01
-
-static int __init olpc_init(void)
-{
- unsigned char *romsig;
- char revision[10];
-
- spin_lock_init(&ec_lock);
-
- romsig = ioremap(0xffffffc0, 16);
-
- if (!romsig)
- return 0;
-
- if (strncmp(romsig, "CL1 Q", 7))
- goto unmap;
- if (strncmp(romsig+6, romsig+13, 3)) {
- printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
- goto unmap;
- }
- printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
-
- olpc_platform_info.flags |= OLPC_F_PRESENT;
-
- pm_power_off = olpc_power_off;
-
- /* Get the platform revision */
- platform_detect(revision, sizeof(revision));
-
- /* If olpc_dcon_present isn't set by the command line, then
- * "detect" it
- */
-
- if (olpc_dcon_present == -1) {
- /* B1 and greater always has a DCON */
- if (olpc_platform_info.boardrev >= OLPC_REV_B1 &&
- olpc_platform_info.boardrev < OLPC_REV_UNKNOWN)
- olpc_dcon_present = 1;
- }
-
- if (olpc_dcon_present)
- olpc_platform_info.flags |= OLPC_F_DCON;
-
- /* Get the EC revision */
- ec_detect();
-
- /* Check to see if the VSA exists */
- vsa_detect();
-
- printk(KERN_INFO "OLPC board revision: %s (EC=%x)\n", revision,
- olpc_platform_info.ecver);
-
- unmap:
- iounmap(romsig);
-
- return 0;
-}
-
-postcore_initcall(olpc_init);
+++ /dev/null
-/*
- * Procedures for creating, accessing and interpreting the device tree.
- *
- * Paul Mackerras August 1996.
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
- * {engebret|bergner}@us.ibm.com
- *
- * Adapted for sparc64 by David S. Miller davem@davemloft.net
- *
- * Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/prom.h>
-#include <asm/ofw.h>
-
-/*
- * XXX: This is very much a stub; right now we're keeping 2 device trees
- * in memory (one for promfs, and one here). That will not remain
- * for long!
- */
-
-static struct device_node *allnodes;
-
-/* use when traversing tree through the allnext, child, sibling,
- * or parent members of struct device_node.
- */
-static DEFINE_RWLOCK(devtree_lock);
-
-int of_device_is_compatible(const struct device_node *device,
- const char *compat)
-{
- const char* cp;
- int cplen, l;
-
- cp = of_get_property(device, "compatible", &cplen);
- if (cp == NULL)
- return 0;
- while (cplen > 0) {
- if (strncmp(cp, compat, strlen(compat)) == 0)
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(of_device_is_compatible);
-
-struct device_node *of_get_parent(const struct device_node *node)
-{
- struct device_node *np;
-
- if (!node)
- return NULL;
-
- np = node->parent;
-
- return np;
-}
-EXPORT_SYMBOL(of_get_parent);
-
-struct device_node *of_get_next_child(const struct device_node *node,
- struct device_node *prev)
-{
- struct device_node *next;
-
- next = prev ? prev->sibling : node->child;
- for (; next != 0; next = next->sibling) {
- break;
- }
-
- return next;
-}
-EXPORT_SYMBOL(of_get_next_child);
-
-struct device_node *of_find_node_by_path(const char *path)
-{
- struct device_node *np = allnodes;
-
- for (; np != 0; np = np->allnext) {
- if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
- break;
- }
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_path);
-
-struct device_node *of_find_node_by_phandle(phandle handle)
-{
- struct device_node *np;
-
- for (np = allnodes; np != 0; np = np->allnext)
- if (np->node == handle)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_phandle);
-
-struct device_node *of_find_node_by_name(struct device_node *from,
- const char *name)
-{
- struct device_node *np;
-
- np = from ? from->allnext : allnodes;
- for (; np != NULL; np = np->allnext)
- if (np->name != NULL && strcmp(np->name, name) == 0)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_name);
-
-struct device_node *of_find_node_by_type(struct device_node *from,
- const char *type)
-{
- struct device_node *np;
-
- np = from ? from->allnext : allnodes;
- for (; np != 0; np = np->allnext)
- if (np->type != 0 && strcmp(np->type, type) == 0)
- break;
-
- return np;
-}
-EXPORT_SYMBOL(of_find_node_by_type);
-
-struct device_node *of_find_compatible_node(struct device_node *from,
- const char *type, const char *compatible)
-{
- struct device_node *np;
-
- np = from ? from->allnext : allnodes;
- for (; np != 0; np = np->allnext) {
- if (type != NULL
- && !(np->type != 0 && strcmp(np->type, type) == 0))
- continue;
- if (of_device_is_compatible(np, compatible))
- break;
- }
-
- return np;
-}
-EXPORT_SYMBOL(of_find_compatible_node);
-
-struct property *of_find_property(const struct device_node *np,
- const char *name,
- int *lenp)
-{
- struct property *pp;
-
- for (pp = np->properties; pp != 0; pp = pp->next) {
- if (strcasecmp(pp->name, name) == 0) {
- if (lenp != 0)
- *lenp = pp->length;
- break;
- }
- }
- return pp;
-}
-EXPORT_SYMBOL(of_find_property);
-
-/*
- * Find a property with a given name for a given node
- * and return the value.
- */
-const void *of_get_property(const struct device_node *np, const char *name,
- int *lenp)
-{
- struct property *pp = of_find_property(np,name,lenp);
- return pp ? pp->value : NULL;
-}
-EXPORT_SYMBOL(of_get_property);
-
-int of_getintprop_default(struct device_node *np, const char *name, int def)
-{
- struct property *prop;
- int len;
-
- prop = of_find_property(np, name, &len);
- if (!prop || len != 4)
- return def;
-
- return *(int *) prop->value;
-}
-EXPORT_SYMBOL(of_getintprop_default);
-
-int of_n_addr_cells(struct device_node *np)
-{
- const int* ip;
- do {
- if (np->parent)
- np = np->parent;
- ip = of_get_property(np, "#address-cells", NULL);
- if (ip != NULL)
- return *ip;
- } while (np->parent);
- /* No #address-cells property for the root node, default to 2 */
- return 2;
-}
-EXPORT_SYMBOL(of_n_addr_cells);
-
-int of_n_size_cells(struct device_node *np)
-{
- const int* ip;
- do {
- if (np->parent)
- np = np->parent;
- ip = of_get_property(np, "#size-cells", NULL);
- if (ip != NULL)
- return *ip;
- } while (np->parent);
- /* No #size-cells property for the root node, default to 1 */
- return 1;
-}
-EXPORT_SYMBOL(of_n_size_cells);
-
-int of_set_property(struct device_node *dp, const char *name, void *val, int len)
-{
- return -EIO;
-}
-EXPORT_SYMBOL(of_set_property);
-
-static unsigned int prom_early_allocated;
-
-static void * __init prom_early_alloc(unsigned long size)
-{
- void *ret;
-
- ret = kmalloc(size, GFP_KERNEL);
- if (ret != NULL)
- memset(ret, 0, size);
- else
- printk(KERN_ERR "ACK! couldn't allocate prom memory!\n");
-
- prom_early_allocated += size;
-
- return ret;
-}
-
-static int is_root_node(const struct device_node *dp)
-{
- if (!dp)
- return 0;
-
- return (dp->parent == NULL);
-}
-
-static char * __init build_path_component(struct device_node *dp)
-{
- int pathlen;
- char *n, *i;
-
- if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
- printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
- return "ERROR";
- }
- n = prom_early_alloc(pathlen + 1);
- if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
- printk(KERN_ERR "PROM: unable to get path name from OFW\n");
-
- if ((i = strrchr(n, '/')))
- n = ++i; /* we only want the file name */
- return n;
-}
-
-static char * __init build_full_name(struct device_node *dp)
-{
- int len, ourlen, plen;
- char *n;
-
- plen = strlen(dp->parent->full_name);
- ourlen = strlen(dp->path_component_name);
- len = ourlen + plen + 2;
-
- n = prom_early_alloc(len);
- strcpy(n, dp->parent->full_name);
- if (!is_root_node(dp->parent)) {
- strcpy(n + plen, "/");
- plen++;
- }
- strcpy(n + plen, dp->path_component_name);
-
- return n;
-}
-
-static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
-{
- static struct property *tmp = NULL;
- struct property *p;
-
- if (tmp) {
- p = tmp;
- memset(p, 0, sizeof(*p) + 32);
- tmp = NULL;
- } else {
- p = prom_early_alloc(sizeof(struct property) + 32);
- }
-
- p->name = (char *) (p + 1);
- if (special_name) {
- strcpy(p->name, special_name);
- p->length = special_len;
- p->value = prom_early_alloc(special_len);
- memcpy(p->value, special_val, special_len);
- } else {
- int fl;
- if (prev == NULL) {
- if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
- printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
- return NULL;
- }
- } else {
- if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
- printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
- return NULL;
- }
- }
- if (strlen(p->name) == 0 || fl != 1) {
- tmp = p;
- return NULL;
- }
- if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
- printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
- return NULL;
- }
- if (p->length <= 0) {
- p->length = 0;
- } else {
- p->value = prom_early_alloc(p->length + 1);
- if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
- printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
- return NULL;
- }
- ((unsigned char *)p->value)[p->length] = '\0';
- }
- }
- return p;
-}
-
-static struct property * __init build_prop_list(phandle node)
-{
- struct property *head, *tail;
-
- head = tail = build_one_prop(node, NULL,
- ".node", &node, sizeof(node));
-
- tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
- tail = tail->next;
- while(tail) {
- tail->next = build_one_prop(node, tail->name,
- NULL, NULL, 0);
- tail = tail->next;
- }
-
- return head;
-}
-
-static char * __init get_one_property(phandle node, const char *name)
-{
- char *buf = "<NULL>";
- int len;
-
- if (ofw("getproplen", 2, 1, node, name, &len)) {
- printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
- return NULL;
- }
- if (len > 0) {
- buf = prom_early_alloc(len);
- if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
- printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
- return NULL;
- }
- }
-
- return buf;
-}
-
-static struct device_node * __init create_node(phandle node, struct device_node *parent)
-{
- struct device_node *dp;
-
- if (!node)
- return NULL;
-
- dp = prom_early_alloc(sizeof(*dp));
- dp->parent = parent;
-
- kref_init(&dp->kref);
-
- dp->name = get_one_property(node, "name");
- dp->type = get_one_property(node, "device_type");
- dp->node = node;
-
- dp->properties = build_prop_list(node);
-
- return dp;
-}
-
-static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
-{
- struct device_node *ret = NULL, *prev_sibling = NULL;
- struct device_node *dp;
- u32 child;
-
- while (1) {
- dp = create_node(node, parent);
- if (!dp)
- break;
-
- if (prev_sibling)
- prev_sibling->sibling = dp;
-
- if (!ret)
- ret = dp;
- prev_sibling = dp;
-
- *(*nextp) = dp;
- *nextp = &dp->allnext;
-
- dp->path_component_name = build_path_component(dp);
- dp->full_name = build_full_name(dp);
-
- if (ofw("child", 1, 1, node, &child)) {
- printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
- return NULL;
- }
- dp->child = build_tree(dp, child, nextp);
-
- if (ofw("peer", 1, 1, node, &node)) {
- printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
- return NULL;
- }
- }
-
- return ret;
-}
-
-static phandle root_node;
-
-void __init prom_build_devicetree(void)
-{
- struct device_node **nextp;
- u32 child;
-
- if (ofw("peer", 1, 1, 0, &root_node)) {
- printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
- return;
- }
-
- allnodes = create_node(root_node, NULL);
- allnodes->path_component_name = "";
- allnodes->full_name = "/";
-
- nextp = &allnodes->allnext;
- if (ofw("child", 1, 1, allnodes->node, &child)) {
- printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
- return;
- }
- allnodes->child = build_tree(allnodes, child, &nextp);
- printk("PROM: Built device tree with %u bytes of memory.\n",
- prom_early_allocated);
-}
+++ /dev/null
-/*
- * olpcpci.c - Low-level PCI config space access for OLPC systems
- * without the VSA PCI virtualization software.
- *
- * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
- * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
- * that more or less behave like PCI devices, but the hardware doesn't
- * directly implement the PCI configuration space headers. AMD provides
- * "VSA" (Virtual System Architecture) software that emulates PCI config
- * space for these devices, by trapping I/O accesses to PCI config register
- * (CF8/CFC) and running some code in System Management Mode interrupt state.
- * On the OLPC platform, we don't want to use that VSA code because
- * (a) it slows down suspend/resume, and (b) recompiling it requires special
- * compilers that are hard to get. So instead of letting the complex VSA
- * code simulate the PCI config registers for the on-chip devices, we
- * just simulate them the easy way, by inserting the code into the
- * pci_write_config and pci_read_config path. Most of the config registers
- * are read-only anyway, so the bulk of the simulation is just table lookup.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <asm/olpc.h>
-#include <asm/geode.h>
-#include "pci.h"
-
-static int is_lx;
-
-/*
- * In the tables below, the first two line (8 longwords) are the
- * size masks that are used when the higher level PCI code determines
- * the size of the region by writing ~0 to a base address register
- * and reading back the result.
- *
- * The following lines are the values that are read during normal
- * PCI config access cycles, i.e. not after just having written
- * ~0 to a base address register.
- */
-
-static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */
- 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */
- 0x0 , 0x0 , 0x0 , 0x28100b ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
- 0xfffffffd , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */
- 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */
- 0x0 , 0x0 , 0x0 , 0x28100b ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
- 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */
- 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
- 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */
- 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
- 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */
- 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
- 0x0 , 0x0 , 0x0 , 0x30100b ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */
- 0xffffc000 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */
- 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */
- 0x0 , 0x0 , 0x0 , 0x20821022 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-
-static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */
- 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
- 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 ,
-
- 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 ,
- 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */
- 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */
- 0xffffff81 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 ,
- 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */
- 0x0 , 0x0 , 0x0 , 0x20931022 ,
- 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */
- 0xfffff000 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20941022 , 0x2300006 , 0xc031002 , 0x0 ,
- 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
- 0x0 , 0x0 , 0x0 , 0x20941022 ,
- 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
- 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
- 0x0 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-};
-
-static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */
- 0xfffff000 , 0x0 , 0x0 , 0x0 ,
- 0x0 , 0x0 , 0x0 , 0x0 ,
-
- 0x20951022 , 0x2300006 , 0xc032002 , 0x0 ,
- 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
- 0x0 , 0x0 , 0x0 , 0x20951022 ,
- 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
- 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
-#if 0
- 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
-#endif
- 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
- 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */
-};
-
-static u32 ff_loc = ~0;
-static u32 zero_loc = 0;
-
-static int bar_probing = 0; /* Set after a write of ~0 to a BAR */
-
-#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */
-#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */
-#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
-
-static u32 *hdr_addr(const u32 *hdr, int reg)
-{
- u32 addr;
-
- /*
- * This is a little bit tricky. The header maps consist of
- * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
- * In the normal case, when not probing a BAR's size, we want
- * to access the header data, so we add 0x20 to the reg offset,
- * thus skipping the size mask area.
- * In the BAR probing case, we want to access the size mask for
- * the BAR, so we subtract 0x10 (the config header offset for
- * BAR0), and don't skip the size mask area.
- */
-
- addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
-
- bar_probing = 0;
- return (u32 *)addr;
-}
-
-static int pci_olpc_read(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *value)
-{
- u32 *addr;
-
- /* Use the hardware mechanism for non-simulated devices */
- if (!SIMULATED(bus, devfn))
- return pci_conf1_read(seg, bus, devfn, reg, len, value);
-
- /*
- * No device has config registers past 0x70, so we save table space
- * by not storing entries for the nonexistent registers
- */
- if (reg >= 0x70)
- addr = &zero_loc;
- else {
- switch (devfn) {
- case 0x8:
- addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
- break;
- case 0x9:
- addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
- break;
- case 0xa:
- addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
- break;
- case 0x78:
- addr = hdr_addr(isa_hdr, reg);
- break;
- case 0x7b:
- addr = hdr_addr(ac97_hdr, reg);
- break;
- case 0x7c:
- addr = hdr_addr(ohci_hdr, reg);
- break;
- case 0x7d:
- addr = hdr_addr(ehci_hdr, reg);
- break;
- default:
- addr = &ff_loc;
- break;
- }
- }
- switch (len) {
- case 1:
- *value = *(u8 *) addr;
- break;
- case 2:
- *value = *(u16 *) addr;
- break;
- case 4:
- *value = *addr;
- break;
- default:
- BUG();
- }
-
- return 0;
-}
-
-static int pci_olpc_write(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 value)
-{
- /* Use the hardware mechanism for non-simulated devices */
- if (!SIMULATED(bus, devfn))
- return pci_conf1_write(seg, bus, devfn, reg, len, value);
-
- /* XXX we may want to extend this to simulate EHCI power management */
-
- /*
- * Mostly we just discard writes, but if the write is a size probe
- * (i.e. writing ~0 to a BAR), we remember it and arrange to return
- * the appropriate size mask on the next read. This is cheating
- * to some extent, because it depends on the fact that the next
- * access after such a write will always be a read to the same BAR.
- */
-
- if ((reg >= 0x10) && (reg < 0x2c)) {
- /* Write is to a BAR */
- if (value == ~0)
- bar_probing = 1;
- } else {
- /*
- * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
- * CACHE_LINE_SIZE, or PM registers.
- */
- if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
- (reg != 0x0c) && (reg != 0x44))
- printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
- }
-
- return 0;
-}
-
-static struct pci_raw_ops pci_olpc_conf = {
- .read = pci_olpc_read,
- .write = pci_olpc_write,
-};
-
-void __init pci_olpc_init(void)
-{
- if (!machine_is_olpc() || olpc_has_vsa())
- return;
-
- printk(KERN_INFO "PCI: Using configuration type OLPC\n");
- raw_pci_ops = &pci_olpc_conf;
- is_lx = is_geode_lx();
-}
+++ /dev/null
-/*
- * OLPC touchpad PS/2 mouse driver
- *
- * Copyright (c) 2006 One Laptop Per Child, inc.
- * Authors Zephaniah E. Hull and Andres Salomon <dilinger@laptop.org>
- *
- * This driver is partly based on the ALPS driver, which is:
- *
- * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
- * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
- * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
- * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The touchpad on the OLPC is fairly wide, with the entire area usable
- * as a tablet ("PT mode"), and the center 1/3rd also usable as a touchpad
- * ("GS mode").
- *
- * Earlier version of the device had simultaneous reporting; however, that
- * was removed. Instead, the device now reports packets in one mode, and
- * tells the driver when a mode switch needs to happen.
- */
-
-#include <linux/input.h>
-#include <linux/serio.h>
-#include <linux/libps2.h>
-#include <linux/delay.h>
-#include <asm/olpc.h>
-
-#include "psmouse.h"
-#include "olpc.h"
-
-static int tpdebug;
-module_param(tpdebug, int, 0644);
-
-#define OLPC_GS 1 /* The GS sensor. */
-#define OLPC_PT 2 /* The PT sensor. */
-
-static struct olpc_model_info olpc_model_data[] = {
- { { 0x67, 0x00, 0x00 }, OLPC_GS | OLPC_PT }, /* unknown ID */
- { { 0x67, 0x00, 0x0a }, OLPC_GS | OLPC_PT }, /* pre-B1 */
- { { 0x67, 0x00, 0x14 }, OLPC_GS }, /* B1.*/
- { { 0x67, 0x00, 0x28 }, OLPC_GS | OLPC_PT }, /* B2 */
- { { 0x67, 0x00, 0x3c }, OLPC_GS | OLPC_PT }, /* B2-2 */
- { { 0x67, 0x00, 0x50 }, OLPC_GS | OLPC_PT }, /* C1 */
-};
-
-#define OLPC_PKT_PT 0xcf
-#define OLPC_PKT_GS 0xff
-
-static int olpc_absolute_mode(struct psmouse *psmouse, int mode);
-
-/*
- * OLPC absolute Mode - single-mode format
- *
- * byte 0: 1 1 0 0 1 1 1 1
- * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
- * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw gs-dsw
- * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw
- * byte 3: 0 y9 y8 y7 1 0 swr swl
- * byte 4: 0 y6 y5 y4 y3 y2 y1 y0
- * byte 5: 0 z6 z5 z4 z3 z2 z1 z0
- *
- * ?'s are not defined in the protocol spec, may vary between models.
- *
- * swr/swl are the left/right buttons.
- *
- * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
- * pen/finger
- */
-
-static void olpc_process_packet_gspt(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
- unsigned char *packet = psmouse->packet;
- struct input_dev *dev = psmouse->dev;
- struct input_dev *dev2 = priv->dev2;
- int x, y, z, gs_down = 0, pt_down = 0, left, right;
- struct timeval now_tv;
- s64 now_ns;
-
- left = packet[3] & 1;
- right = packet[3] & 2;
- x = packet[1] | ((packet[2] & 0x78) << 4);
- y = packet[4] | ((packet[3] & 0x70) << 3);
- z = packet[5];
-
- if (psmouse->packet[0] == OLPC_PKT_GS) {
- pt_down = !!(packet[2] & 1);
- gs_down = !!(packet[2] & 2);
- } else if (psmouse->packet[0] == OLPC_PKT_PT) {
- gs_down = !!(packet[2] & 1);
- pt_down = !!(packet[2] & 2);
- }
-
- /*
- * XXX: Kludge.
- * If it's been more than 30ms since the last packet,
- * assume that there was a lift we were never told about.
- */
- do_gettimeofday(&now_tv);
- now_ns = timeval_to_ns (&now_tv);
- if (now_ns >= priv->late) {
- input_report_key(dev, BTN_TOUCH, 0);
- input_report_key(dev, BTN_TOOL_PEN, 0);
- input_report_key(dev2, BTN_TOUCH, 0);
- input_report_key(dev2, BTN_TOOL_FINGER, 0);
-
- input_sync(dev);
- input_sync(dev2);
- }
-
- priv->late = now_ns + (30 * NSEC_PER_MSEC);
-
-
- if (tpdebug) {
- printk(KERN_DEBUG "%s %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__, psmouse->packet[0], psmouse->packet[1],
- psmouse->packet[2], psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5]);
- printk(KERN_DEBUG "l=%d r=%d p=%d g=%d x=%d y=%d z=%d\n",
- left, right, pt_down, gs_down, x, y, z);
- }
-
- if (psmouse->packet[0] == OLPC_PKT_PT) {
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- } else if (psmouse->packet[0] == OLPC_PKT_GS) {
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev2, BTN_LEFT, left);
- input_report_key(dev2, BTN_RIGHT, right);
- }
-
- input_report_key(dev, BTN_TOUCH, pt_down);
- input_report_key(dev, BTN_TOOL_PEN, pt_down);
- input_report_key(dev2, BTN_TOUCH, gs_down);
- input_report_key(dev2, BTN_TOOL_FINGER, gs_down);
-
- input_report_abs(dev2, ABS_PRESSURE, z);
-
- if (psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
- } else if (psmouse->packet[0] == OLPC_PKT_GS && gs_down) {
- input_report_abs(dev2, ABS_X, x);
- input_report_abs(dev2, ABS_Y, y);
- }
-
- input_sync(dev);
- input_sync(dev2);
-
- if (priv->pending_mode == OLPC_GS &&
- psmouse->packet[0] == OLPC_PKT_PT && pt_down) {
- priv->pending_mode = 0;
- cancel_delayed_work(&priv->mode_switch);
- }
-
- if (priv->i->flags & (OLPC_PT|OLPC_GS)) {
- int pending = 0;
- if (psmouse->packet[0] == OLPC_PKT_PT && !pt_down)
- pending = OLPC_GS;
- else if (psmouse->packet[0] == OLPC_PKT_GS && pt_down)
- pending = OLPC_PT;
-
- if (priv->current_mode == pending) {
- priv->pending_mode = 0;
- pending = priv->current_mode;
- }
- else if (priv->pending_mode != pending) {
- priv->pending_mode = pending;
- if (tpdebug)
- printk(KERN_WARNING "Scheduling mode switch to %s.\n",
- pending == OLPC_GS ? "GS" : "PT");
-
- /*
- * Apply a de-bounce when switching from PT to GS, to allow for
- * spurious PT-up packets.
- */
- if (priv->pending_mode == OLPC_GS)
- queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
- else
- queue_delayed_work(kpsmoused_wq, &priv->mode_switch, 0);
- }
- }
-}
-
-static psmouse_ret_t olpc_process_byte(struct psmouse *psmouse)
-{
- psmouse_ret_t ret = PSMOUSE_BAD_DATA;
-
- if (psmouse->packet[0] != OLPC_PKT_PT &&
- psmouse->packet[0] != OLPC_PKT_GS)
- goto out;
-
- /* Bytes 2 - 6 should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
- (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
- goto out;
-
- if (psmouse->pktcnt == 6) {
- olpc_process_packet_gspt(psmouse);
- ret = PSMOUSE_FULL_PACKET;
- goto out;
- }
-
- ret = PSMOUSE_GOOD_DATA;
-out:
- if (ret != PSMOUSE_GOOD_DATA && ret != PSMOUSE_FULL_PACKET)
- printk(KERN_DEBUG "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__, psmouse->pktcnt, psmouse->packet[0],
- psmouse->packet[1], psmouse->packet[2],
- psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5]);
- return ret;
-}
-
-static struct olpc_model_info *olpc_get_model(struct psmouse *psmouse)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- unsigned char param[4];
- int i;
-
- /*
- * Now try "E7 report". Allowed responses are in
- * olpc_model_data[].signature
- */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
- return NULL;
-
- param[0] = param[1] = param[2] = 0xff;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return NULL;
-
- pr_debug("olpc.c(%d): E7 report: %2.2x %2.2x %2.2x",
- __LINE__, param[0], param[1], param[2]);
-
- for (i = 0; i < ARRAY_SIZE(olpc_model_data); i++) {
- if (!memcmp(param, olpc_model_data[i].signature,
- sizeof(olpc_model_data[i].signature))) {
- printk(KERN_INFO __FILE__ ": OLPC touchpad revision 0x%x.\n", param[2]);
- return olpc_model_data + i;
- }
- }
-
- /*
- * ALPS creates new IDs pretty frequently; rather than listing them
- * all, just assume they support the defaults. We've set aside the
- * first entry of olpc_model_data as the catch-all.
- */
- if (!memcmp(param, olpc_model_data[0].signature, 2)) {
- printk(KERN_INFO __FILE__ ": unknown ALPS revision %x, assuming default flags.\n", param[2]);
- return &olpc_model_data[0];
- }
-
- return NULL;
-}
-
-static int olpc_find_mode(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
- int mode = priv->i->flags;
-
- if (mode & OLPC_GS)
- mode = OLPC_GS;
- else if (mode & OLPC_PT)
- mode = OLPC_PT;
- else
- mode = -1;
-
- return mode;
-}
-
-/*
- * Touchpad should be disabled before calling this!
- */
-static int olpc_new_mode(struct psmouse *psmouse, int mode)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- struct olpc_data *priv = psmouse->private;
- unsigned char param;
- int ret;
-
- if (tpdebug)
- printk(KERN_WARNING __FILE__ ": Switching to %d. [%lu]\n", mode, jiffies);
-
- if ((ret = ps2_command(ps2dev, ¶m, 0x01F2)))
- goto failed;
- if ((ret = ps2_command(ps2dev, ¶m, 0x01F2)))
- goto failed;
- if ((ret = ps2_command(ps2dev, ¶m, 0x01F2)))
- goto failed;
-
- switch (mode) {
- default:
- printk(KERN_WARNING __FILE__ ": Invalid mode %d. Defaulting to OLPC_GS.\n", mode);
- case OLPC_GS:
- ret = ps2_command(ps2dev, NULL, 0xE6);
- break;
- case OLPC_PT:
- ret = ps2_command(ps2dev, NULL, 0xE7);
- break;
- }
- if (ret)
- goto failed;
-
- /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
- psmouse->pktcnt = psmouse->out_of_sync = 0;
- psmouse->last = jiffies;
- psmouse->state = PSMOUSE_ACTIVATED;
-
- if ((ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)))
- goto failed;
-
- priv->current_mode = mode;
- priv->pending_mode = 0;
- if (tpdebug)
- printk(KERN_WARNING __FILE__ ": Switched to mode %d successful.\n", mode);
-
-failed:
- if (ret)
- printk(KERN_WARNING __FILE__ ": Mode switch to %d failed! (%d) [%lu]\n", mode, ret, jiffies);
- return ret;
-}
-
-static int olpc_absolute_mode(struct psmouse *psmouse, int mode)
-{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
-
- /* Switch to 'Advanced mode.', four disables in a row. */
- if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
- ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
- return -1;
-
- return olpc_new_mode(psmouse, mode);
-}
-
-/*
- * olpc_poll() - poll the touchpad for current motion packet.
- * Used in resync.
- * Note: We can't poll, so always return failure.
- */
-static int olpc_poll(struct psmouse *psmouse)
-{
- return -1;
-}
-
-static int olpc_reconnect(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
- int mode;
-
- if (olpc_rev_after(OLPC_REV_B2))
- if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
- return 0;
-
- psmouse_reset(psmouse);
-
- if (!(priv->i = olpc_get_model(psmouse)))
- return -1;
-
- mode = olpc_find_mode(psmouse);
- if (mode < 0)
- return -1;
-
- if (olpc_absolute_mode(psmouse, mode)) {
- printk(KERN_ERR __FILE__ ": Failed to reenable absolute mode.\n");
- return -1;
- }
-
- return 0;
-}
-
-static void olpc_disconnect(struct psmouse *psmouse)
-{
- struct olpc_data *priv = psmouse->private;
-
- psmouse_reset(psmouse);
- input_unregister_device(priv->dev2);
- kfree(priv);
-}
-
-static void olpc_mode_switch(struct work_struct *w)
-{
- struct delayed_work *work = container_of(w, struct delayed_work, work);
- struct olpc_data *priv = container_of(work, struct olpc_data, mode_switch);
- struct psmouse *psmouse = priv->psmouse;
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- int pending_mode, ret;
-
- if (priv->pending_mode == priv->current_mode) {
- priv->pending_mode = 0;
- printk (KERN_DEBUG __FILE__ ": In switch_mode, no target mode.\n");
- return;
- }
-
- if (tpdebug)
- printk(KERN_WARNING __FILE__ ": Disable for switch to %d. [%lu]\n", priv->pending_mode, jiffies);
-
- /* XXX: This is a bit hacky, make sure this isn't screwing stuff up. */
- psmouse->state = PSMOUSE_INITIALIZING;
-
- ret = ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
- if (ret) {
- /* XXX: if this ever fails, we need to do a full reset! */
- printk(KERN_WARNING __FILE__ ": Disable failed for switch to %d. (%d) [%lu]\n", priv->pending_mode, ret, jiffies);
- return;
- }
-
- /*
- * ALPS tells us that it may take up to 20msec for the disable to
- * take effect; however, ps2_command() will wait up to 200msec for
- * the ACK to come back (and I'm assuming that by the time the
- * hardware sends back its ACK, it has stopped sending bytes).
- */
- pending_mode = priv->pending_mode;
-
- if (olpc_new_mode(psmouse, priv->pending_mode))
- goto bad;
-
- /*
- * Deal with a potential race condition.
- *
- * If there is a brief tap of a stylus or a fingernail that
- * triggers a mode switch to PT mode, and the stylus/fingernail is
- * lifted after the DISABLE above, but before we reenable in the new mode,
- * then we can get stuck in PT mode.
- */
- if (pending_mode == OLPC_PT) {
- priv->pending_mode = OLPC_GS;
- queue_delayed_work(kpsmoused_wq, &priv->mode_switch, msecs_to_jiffies(50));
- }
-
- return;
-
-bad:
- printk(KERN_WARNING __FILE__ ": Failure to switch modes, resetting device...\n");
- olpc_reconnect(psmouse);
-}
-
-int olpc_init(struct psmouse *psmouse)
-{
- struct olpc_data *priv;
- struct input_dev *dev = psmouse->dev;
- struct input_dev *dev2;
- int mode;
-
- priv = kzalloc(sizeof(struct olpc_data), GFP_KERNEL);
- dev2 = input_allocate_device();
- if (!priv || !dev2)
- goto init_fail;
-
- psmouse->private = priv;
- priv->dev2 = dev2;
- priv->psmouse = psmouse;
-
- psmouse_reset(psmouse);
- if (!(priv->i = olpc_get_model(psmouse)))
- goto init_fail;
-
- mode = olpc_find_mode(psmouse);
- if (mode < 0) {
- printk(KERN_ERR __FILE__ ": Failed to identify proper mode\n");
- goto init_fail;
- }
-
- if (olpc_absolute_mode(psmouse, mode)) {
- printk(KERN_ERR __FILE__ ": Failed to enable absolute mode\n");
- goto init_fail;
- }
-
- /*
- * Unset some of the default bits for things we don't have.
- */
- dev->evbit[LONG(EV_REL)] &= ~BIT(EV_REL);
- dev->relbit[LONG(REL_X)] &= ~(BIT(REL_X) | BIT(REL_Y));
- dev->keybit[LONG(BTN_MIDDLE)] &= ~BIT(BTN_MIDDLE);
-
- dev->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
- dev->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- dev->keybit[LONG(BTN_TOOL_PEN)] |= BIT(BTN_TOOL_PEN);
- dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-
- dev->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
- input_set_abs_params(dev, ABS_X, 2, 1000, 0, 0);
- input_set_abs_params(dev, ABS_Y, 0, 717, 0, 0);
-
- snprintf(priv->phys, sizeof(priv->phys),
- "%s/input1", psmouse->ps2dev.serio->phys);
- dev2->phys = priv->phys;
- dev2->name = "OLPC ALPS GlideSensor";
- dev2->id.bustype = BUS_I8042;
- dev2->id.vendor = 0x0002;
- dev2->id.product = PSMOUSE_OLPC;
- dev2->id.version = 0x0000;
-
- dev2->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
- dev2->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- dev2->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
- dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT);
-
- dev2->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
- input_set_abs_params(dev2, ABS_X, 350, 512, 0, 0);
- input_set_abs_params(dev2, ABS_Y, 70, 325, 0, 0);
- input_set_abs_params(dev2, ABS_PRESSURE, 0, 63, 0, 0);
-
- if (input_register_device(dev2)) {
- printk(KERN_ERR __FILE__ ": Failed to register GlideSensor\n");
- goto init_fail;
- }
-
- psmouse->protocol_handler = olpc_process_byte;
- psmouse->poll = olpc_poll;
- psmouse->disconnect = olpc_disconnect;
- psmouse->reconnect = olpc_reconnect;
- psmouse->pktsize = 6;
-
- /* Disable the idle resync. */
- psmouse->resync_time = 0;
- /* Reset after a lot of bad bytes. */
- psmouse->resetafter = 1024;
-
- INIT_DELAYED_WORK(&priv->mode_switch, olpc_mode_switch);
-
- return 0;
-
-init_fail:
- input_free_device(dev2);
- kfree(priv);
- return -1;
-}
-
-int olpc_detect(struct psmouse *psmouse, int set_properties)
-{
- if (!olpc_get_model(psmouse))
- return -1;
-
- if (set_properties) {
- psmouse->vendor = "ALPS";
- psmouse->name = "PenTablet";
- psmouse->model = 0;
- }
- return 0;
-}
-
+++ /dev/null
-/*
- * OLPC touchpad PS/2 mouse driver
- *
- * Copyright (c) 2006 One Laptop Per Child, inc.
- *
- * This driver is partly based on the ALPS driver.
- * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
- * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef _OLPC_H
-#define _OLPC_H
-
-struct olpc_model_info {
- unsigned char signature[3];
- unsigned char flags;
-};
-
-struct olpc_data {
- struct input_dev *dev2; /* Relative device */
- struct psmouse *psmouse;
- char name[32]; /* Name */
- char phys[32]; /* Phys */
- struct olpc_model_info *i; /* Info */
- int pending_mode;
- int current_mode;
- s64 late;
- struct delayed_work mode_switch;
-};
-
-#ifdef CONFIG_MOUSE_PS2_OLPC
-int olpc_detect(struct psmouse *psmouse, int set_properties);
-int olpc_init(struct psmouse *psmouse);
-#else
-inline int olpc_detect(struct psmouse *psmouse, int set_properties)
-{
- return -ENOSYS;
-}
-inline int olpc_init(struct psmouse *psmouse)
-{
- return -ENOSYS;
-}
-#endif
-
-#endif
+++ /dev/null
-/* linux/drivers/mtd/mtdcore.h
- *
- * Header file for driver private mtdcore exports
- *
- */
-
-/* These are exported solely for the purpose of mtd_blkdevs.c. You
- should not use them for _anything_ else */
-
-extern struct mutex mtd_table_mutex;
-extern struct mtd_info *mtd_table[MAX_MTD_DEVICES];
+++ /dev/null
-/*
- * MTD Oops/Panic logger
- *
- * Copyright (C) 2007 Nokia Corporation. All rights reserved.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/console.h>
-#include <linux/vmalloc.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/mtd/mtd.h>
-
-#define OOPS_PAGE_SIZE 4096
-
-static struct mtdoops_context {
- int mtd_index;
- struct work_struct work;
- struct mtd_info *mtd;
- int oops_pages;
- int nextpage;
- int nextcount;
-
- void *oops_buf;
- int ready;
- int writecount;
-} oops_cxt;
-
-static void mtdoops_erase_callback(struct erase_info *done)
-{
- wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
- wake_up(wait_q);
-}
-
-static int mtdoops_erase_block(struct mtd_info *mtd, int offset)
-{
- struct erase_info erase;
- DECLARE_WAITQUEUE(wait, current);
- wait_queue_head_t wait_q;
- int ret;
-
- init_waitqueue_head(&wait_q);
- erase.mtd = mtd;
- erase.callback = mtdoops_erase_callback;
- erase.addr = offset;
- if (mtd->erasesize < OOPS_PAGE_SIZE)
- erase.len = OOPS_PAGE_SIZE;
- else
- erase.len = mtd->erasesize;
- erase.priv = (u_long)&wait_q;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&wait_q, &wait);
-
- ret = mtd->erase(mtd, &erase);
- if (ret) {
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&wait_q, &wait);
- printk (KERN_WARNING "mtdoops: erase of region [0x%x, 0x%x] "
- "on \"%s\" failed\n",
- erase.addr, erase.len, mtd->name);
- return ret;
- }
-
- schedule(); /* Wait for erase to finish. */
- remove_wait_queue(&wait_q, &wait);
-
- return 0;
-}
-
-static int mtdoops_inc_counter(struct mtdoops_context *cxt)
-{
- struct mtd_info *mtd = cxt->mtd;
- size_t retlen;
- u32 count;
- int ret;
-
- cxt->nextpage++;
- if (cxt->nextpage > cxt->oops_pages)
- cxt->nextpage = 0;
- cxt->nextcount++;
- if (cxt->nextcount == 0xffffffff)
- cxt->nextcount = 0;
-
- ret = mtd->read(mtd, cxt->nextpage * OOPS_PAGE_SIZE, 4,
- &retlen, (u_char *) &count);
- if ((retlen != 4) || (ret < 0)) {
- printk(KERN_ERR "mtdoops: Read failure at %d (%d of 4 read)"
- ", err %d.\n", cxt->nextpage * OOPS_PAGE_SIZE,
- retlen, ret);
- return 1;
- }
-
- /* See if we need to erase the next block */
- if (count != 0xffffffff)
- return 1;
-
- printk(KERN_DEBUG "mtdoops: Ready %d, %d (no erase)\n",
- cxt->nextpage, cxt->nextcount);
- cxt->ready = 1;
- return 0;
-}
-
-static void mtdoops_prepare(struct mtdoops_context *cxt)
-{
- struct mtd_info *mtd = cxt->mtd;
- int i = 0, j, ret, mod;
-
- /* We were unregistered */
- if (!mtd)
- return;
-
- mod = (cxt->nextpage * OOPS_PAGE_SIZE) % mtd->erasesize;
- if (mod != 0) {
- cxt->nextpage = cxt->nextpage + ((mtd->erasesize - mod) / OOPS_PAGE_SIZE);
- if (cxt->nextpage > cxt->oops_pages)
- cxt->nextpage = 0;
- }
-
- while (mtd->block_isbad &&
- mtd->block_isbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE)) {
-badblock:
- printk(KERN_WARNING "mtdoops: Bad block at %08x\n",
- cxt->nextpage * OOPS_PAGE_SIZE);
- i++;
- cxt->nextpage = cxt->nextpage + (mtd->erasesize / OOPS_PAGE_SIZE);
- if (cxt->nextpage > cxt->oops_pages)
- cxt->nextpage = 0;
- if (i == (cxt->oops_pages / (mtd->erasesize / OOPS_PAGE_SIZE))) {
- printk(KERN_ERR "mtdoops: All blocks bad!\n");
- return;
- }
- }
-
- for (j = 0, ret = -1; (j < 3) && (ret < 0); j++)
- ret = mtdoops_erase_block(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
-
- if (ret < 0) {
- if (mtd->block_markbad)
- mtd->block_markbad(mtd, cxt->nextpage * OOPS_PAGE_SIZE);
- goto badblock;
- }
-
- printk(KERN_DEBUG "mtdoops: Ready %d, %d \n", cxt->nextpage, cxt->nextcount);
-
- cxt->ready = 1;
-}
-
-static void mtdoops_workfunc(struct work_struct *work)
-{
- struct mtdoops_context *cxt =
- container_of(work, struct mtdoops_context, work);
-
- mtdoops_prepare(cxt);
-}
-
-static int find_next_position(struct mtdoops_context *cxt)
-{
- struct mtd_info *mtd = cxt->mtd;
- int page, maxpos = 0;
- u32 count, maxcount = 0xffffffff;
- size_t retlen;
-
- for (page = 0; page < cxt->oops_pages; page++) {
- mtd->read(mtd, page * OOPS_PAGE_SIZE, 4, &retlen, (u_char *) &count);
- if (count == 0xffffffff)
- continue;
- if (maxcount == 0xffffffff) {
- maxcount = count;
- maxpos = page;
- } else if ((count < 0x40000000) && (maxcount > 0xc0000000)) {
- maxcount = count;
- maxpos = page;
- } else if ((count > maxcount) && (count < 0xc0000000)) {
- maxcount = count;
- maxpos = page;
- } else if ((count > maxcount) && (count > 0xc0000000)
- && (maxcount > 0x80000000)) {
- maxcount = count;
- maxpos = page;
- }
- }
- if (maxcount == 0xffffffff) {
- cxt->nextpage = 0;
- cxt->nextcount = 1;
- cxt->ready = 1;
- printk(KERN_DEBUG "mtdoops: Ready %d, %d (first init)\n",
- cxt->nextpage, cxt->nextcount);
- return 0;
- }
-
- cxt->nextpage = maxpos;
- cxt->nextcount = maxcount;
-
- return mtdoops_inc_counter(cxt);
-}
-
-
-static void mtdoops_notify_add(struct mtd_info *mtd)
-{
- struct mtdoops_context *cxt = &oops_cxt;
- int ret;
-
- if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
- return;
-
- if (mtd->size < (mtd->erasesize * 2)) {
- printk(KERN_ERR "MTD partition %d not big enough for mtdoops\n",
- mtd->index);
- return;
- }
-
- cxt->mtd = mtd;
- cxt->oops_pages = mtd->size / OOPS_PAGE_SIZE;
-
- ret = find_next_position(cxt);
- if (ret == 1)
- mtdoops_prepare(cxt);
-
- printk(KERN_DEBUG "mtdoops: Attached to MTD device %d\n", mtd->index);
-}
-
-static void mtdoops_notify_remove(struct mtd_info *mtd)
-{
- struct mtdoops_context *cxt = &oops_cxt;
-
- if ((mtd->index != cxt->mtd_index) || cxt->mtd_index < 0)
- return;
-
- cxt->mtd = NULL;
- flush_scheduled_work();
-}
-
-
-static void
-mtdoops_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct mtdoops_context *cxt = co->data;
- struct mtd_info *mtd = cxt->mtd;
- int i, ret;
-
- if (!cxt->ready || !mtd)
- return;
-
- if (!oops_in_progress && cxt->writecount != 0) {
- size_t retlen;
- if (cxt->writecount < OOPS_PAGE_SIZE)
- memset(cxt->oops_buf + cxt->writecount, 0xff,
- OOPS_PAGE_SIZE - cxt->writecount);
-
- ret = mtd->write(mtd, cxt->nextpage * OOPS_PAGE_SIZE,
- OOPS_PAGE_SIZE, &retlen, cxt->oops_buf);
- cxt->ready = 0;
- cxt->writecount = 0;
-
- if ((retlen != OOPS_PAGE_SIZE) || (ret < 0))
- printk(KERN_ERR "mtdoops: Write failure at %d (%d of %d"
- " written), err %d.\n",
- cxt->nextpage * OOPS_PAGE_SIZE, retlen,
- OOPS_PAGE_SIZE, ret);
-
- ret = mtdoops_inc_counter(cxt);
- if (ret == 1)
- schedule_work(&cxt->work);
- }
-
- if (!oops_in_progress)
- return;
-
- if (cxt->writecount == 0) {
- u32 *stamp = cxt->oops_buf;
- *stamp = cxt->nextcount;
- cxt->writecount = 4;
- }
-
- if ((count + cxt->writecount) > OOPS_PAGE_SIZE)
- count = OOPS_PAGE_SIZE - cxt->writecount;
-
- for (i = 0; i < count; i++, s++)
- *((char *)(cxt->oops_buf) + cxt->writecount + i) = *s;
-
- cxt->writecount = cxt->writecount + count;
-}
-
-static int __init mtdoops_console_setup(struct console *co, char *options)
-{
- struct mtdoops_context *cxt = co->data;
-
- if (cxt->mtd_index != -1)
- return -EBUSY;
- if (co->index == -1)
- return -EINVAL;
-
- cxt->mtd_index = co->index;
- return 0;
-}
-
-static struct mtd_notifier mtdoops_notifier = {
- .add = mtdoops_notify_add,
- .remove = mtdoops_notify_remove,
-};
-
-static struct console mtdoops_console = {
- .name = "ttyMTD",
- .write = mtdoops_console_write,
- .setup = mtdoops_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &oops_cxt,
-};
-
-static int __init mtdoops_console_init(void)
-{
- struct mtdoops_context *cxt = &oops_cxt;
-
- cxt->mtd_index = -1;
- cxt->oops_buf = vmalloc(OOPS_PAGE_SIZE);
-
- if (!cxt->oops_buf) {
- printk(KERN_ERR "Failed to allocate oops buffer workspace\n");
- return -ENOMEM;
- }
-
- INIT_WORK(&cxt->work, mtdoops_workfunc);
-
- register_console(&mtdoops_console);
- register_mtd_user(&mtdoops_notifier);
- return 0;
-}
-
-static void __exit mtdoops_console_exit(void)
-{
- struct mtdoops_context *cxt = &oops_cxt;
-
- unregister_mtd_user(&mtdoops_notifier);
- unregister_console(&mtdoops_console);
- vfree(cxt->oops_buf);
-}
-
-
-subsys_initcall(mtdoops_console_init);
-module_exit(mtdoops_console_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("MTD Oops/Panic console logger/driver");
+++ /dev/null
-/*
- * linux/drivers/mtd/onenand/onenand_sim.c
- *
- * The OneNAND simulator
- *
- * Copyright © 2005-2007 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <linux/io.h>
-
-#ifndef CONFIG_ONENAND_SIM_MANUFACTURER
-#define CONFIG_ONENAND_SIM_MANUFACTURER 0xec
-#endif
-#ifndef CONFIG_ONENAND_SIM_DEVICE_ID
-#define CONFIG_ONENAND_SIM_DEVICE_ID 0x04
-#endif
-#ifndef CONFIG_ONENAND_SIM_VERSION_ID
-#define CONFIG_ONENAND_SIM_VERSION_ID 0x1e
-#endif
-
-static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER;
-static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID;
-static int version_id = CONFIG_ONENAND_SIM_VERSION_ID;
-
-struct onenand_flash {
- void __iomem *base;
- void __iomem *data;
-};
-
-#define ONENAND_CORE(flash) (flash->data)
-#define ONENAND_CORE_SPARE(flash, this, offset) \
- ((flash->data) + (this->chipsize) + (offset >> 5))
-
-#define ONENAND_MAIN_AREA(this, offset) \
- (this->base + ONENAND_DATARAM + offset)
-
-#define ONENAND_SPARE_AREA(this, offset) \
- (this->base + ONENAND_SPARERAM + offset)
-
-#define ONENAND_GET_WP_STATUS(this) \
- (readw(this->base + ONENAND_REG_WP_STATUS))
-
-#define ONENAND_SET_WP_STATUS(v, this) \
- (writew(v, this->base + ONENAND_REG_WP_STATUS))
-
-/* It has all 0xff chars */
-#define MAX_ONENAND_PAGESIZE (2048 + 64)
-static unsigned char *ffchars;
-
-static struct mtd_partition os_partitions[] = {
- {
- .name = "OneNAND simulator partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/*
- * OneNAND simulator mtd
- */
-struct onenand_info {
- struct mtd_info mtd;
- struct mtd_partition *parts;
- struct onenand_chip onenand;
- struct onenand_flash flash;
-};
-
-struct onenand_info *info;
-
-#define DPRINTK(format, args...) \
-do { \
- printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \
- __LINE__, ##args); \
-} while (0)
-
-/**
- * onenand_lock_handle - Handle Lock scheme
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Send lock command to OneNAND device.
- * The lock scheme is depends on chip type.
- */
-static void onenand_lock_handle(struct onenand_chip *this, int cmd)
-{
- int block_lock_scheme;
- int status;
-
- status = ONENAND_GET_WP_STATUS(this);
- block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK);
-
- switch (cmd) {
- case ONENAND_CMD_UNLOCK:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_US, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this);
- break;
-
- case ONENAND_CMD_LOCK:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this);
- break;
-
- case ONENAND_CMD_LOCK_TIGHT:
- if (block_lock_scheme)
- ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this);
- else
- ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * onenand_bootram_handle - Handle BootRAM area
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Emulate BootRAM area. It is possible to do basic operation using BootRAM.
- */
-static void onenand_bootram_handle(struct onenand_chip *this, int cmd)
-{
- switch (cmd) {
- case ONENAND_CMD_READID:
- writew(manuf_id, this->base);
- writew(device_id, this->base + 2);
- writew(version_id, this->base + 4);
- break;
-
- default:
- /* REVIST: Handle other commands */
- break;
- }
-}
-
-/**
- * onenand_update_interrupt - Set interrupt register
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Update interrupt register. The status is depends on command.
- */
-static void onenand_update_interrupt(struct onenand_chip *this, int cmd)
-{
- int interrupt = ONENAND_INT_MASTER;
-
- switch (cmd) {
- case ONENAND_CMD_READ:
- case ONENAND_CMD_READOOB:
- interrupt |= ONENAND_INT_READ;
- break;
-
- case ONENAND_CMD_PROG:
- case ONENAND_CMD_PROGOOB:
- interrupt |= ONENAND_INT_WRITE;
- break;
-
- case ONENAND_CMD_ERASE:
- interrupt |= ONENAND_INT_ERASE;
- break;
-
- case ONENAND_CMD_RESET:
- interrupt |= ONENAND_INT_RESET;
- break;
-
- default:
- break;
- }
-
- writew(interrupt, this->base + ONENAND_REG_INTERRUPT);
-}
-
-/**
- * onenand_check_overwrite - Check over-write if happend
- * @param dest The destination pointer
- * @param src The source pointer
- * @param count The length to be check
- * @return 0 on same, otherwise 1
- *
- * Compare the source with destination
- */
-static int onenand_check_overwrite(void *dest, void *src, size_t count)
-{
- unsigned int *s = (unsigned int *) src;
- unsigned int *d = (unsigned int *) dest;
- int i;
-
- count >>= 2;
- for (i = 0; i < count; i++)
- if ((*s++ ^ *d++) != 0)
- return 1;
-
- return 0;
-}
-
-/**
- * onenand_data_handle - Handle OneNAND Core and DataRAM
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- * @param dataram Which dataram used
- * @param offset The offset to OneNAND Core
- *
- * Copy data from OneNAND Core to DataRAM (read)
- * Copy data from DataRAM to OneNAND Core (write)
- * Erase the OneNAND Core (erase)
- */
-static void onenand_data_handle(struct onenand_chip *this, int cmd,
- int dataram, unsigned int offset)
-{
- struct mtd_info *mtd = &info->mtd;
- struct onenand_flash *flash = this->priv;
- int main_offset, spare_offset;
- void __iomem *src;
- void __iomem *dest;
- unsigned int i;
-
- if (dataram) {
- main_offset = mtd->writesize;
- spare_offset = mtd->oobsize;
- } else {
- main_offset = 0;
- spare_offset = 0;
- }
-
- switch (cmd) {
- case ONENAND_CMD_READ:
- src = ONENAND_CORE(flash) + offset;
- dest = ONENAND_MAIN_AREA(this, main_offset);
- memcpy(dest, src, mtd->writesize);
- /* Fall through */
-
- case ONENAND_CMD_READOOB:
- src = ONENAND_CORE_SPARE(flash, this, offset);
- dest = ONENAND_SPARE_AREA(this, spare_offset);
- memcpy(dest, src, mtd->oobsize);
- break;
-
- case ONENAND_CMD_PROG:
- src = ONENAND_MAIN_AREA(this, main_offset);
- dest = ONENAND_CORE(flash) + offset;
- /* To handle partial write */
- for (i = 0; i < (1 << mtd->subpage_sft); i++) {
- int off = i * this->subpagesize;
- if (!memcmp(src + off, ffchars, this->subpagesize))
- continue;
- if (memcmp(dest + off, ffchars, this->subpagesize) &&
- onenand_check_overwrite(dest + off, src + off, this->subpagesize))
- printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
- memcpy(dest + off, src + off, this->subpagesize);
- }
- /* Fall through */
-
- case ONENAND_CMD_PROGOOB:
- src = ONENAND_SPARE_AREA(this, spare_offset);
- /* Check all data is 0xff chars */
- if (!memcmp(src, ffchars, mtd->oobsize))
- break;
-
- dest = ONENAND_CORE_SPARE(flash, this, offset);
- if (memcmp(dest, ffchars, mtd->oobsize) &&
- onenand_check_overwrite(dest, src, mtd->oobsize))
- printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
- offset);
- memcpy(dest, src, mtd->oobsize);
- break;
-
- case ONENAND_CMD_ERASE:
- memset(ONENAND_CORE(flash) + offset, 0xff, mtd->erasesize);
- memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff,
- (mtd->erasesize >> 5));
- break;
-
- default:
- break;
- }
-}
-
-/**
- * onenand_command_handle - Handle command
- * @param this OneNAND device structure
- * @param cmd The command to be sent
- *
- * Emulate OneNAND command.
- */
-static void onenand_command_handle(struct onenand_chip *this, int cmd)
-{
- unsigned long offset = 0;
- int block = -1, page = -1, bufferram = -1;
- int dataram = 0;
-
- switch (cmd) {
- case ONENAND_CMD_UNLOCK:
- case ONENAND_CMD_LOCK:
- case ONENAND_CMD_LOCK_TIGHT:
- case ONENAND_CMD_UNLOCK_ALL:
- onenand_lock_handle(this, cmd);
- break;
-
- case ONENAND_CMD_BUFFERRAM:
- /* Do nothing */
- return;
-
- default:
- block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1);
- if (block & (1 << ONENAND_DDP_SHIFT)) {
- block &= ~(1 << ONENAND_DDP_SHIFT);
- /* The half of chip block */
- block += this->chipsize >> (this->erase_shift + 1);
- }
- if (cmd == ONENAND_CMD_ERASE)
- break;
-
- page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8);
- page = (page >> ONENAND_FPA_SHIFT);
- bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER);
- bufferram >>= ONENAND_BSA_SHIFT;
- bufferram &= ONENAND_BSA_DATARAM1;
- dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0;
- break;
- }
-
- if (block != -1)
- offset += block << this->erase_shift;
-
- if (page != -1)
- offset += page << this->page_shift;
-
- onenand_data_handle(this, cmd, dataram, offset);
-
- onenand_update_interrupt(this, cmd);
-}
-
-/**
- * onenand_writew - [OneNAND Interface] Emulate write operation
- * @param value value to write
- * @param addr address to write
- *
- * Write OneNAND register with value
- */
-static void onenand_writew(unsigned short value, void __iomem * addr)
-{
- struct onenand_chip *this = info->mtd.priv;
-
- /* BootRAM handling */
- if (addr < this->base + ONENAND_DATARAM) {
- onenand_bootram_handle(this, value);
- return;
- }
- /* Command handling */
- if (addr == this->base + ONENAND_REG_COMMAND)
- onenand_command_handle(this, value);
-
- writew(value, addr);
-}
-
-/**
- * flash_init - Initialize OneNAND simulator
- * @param flash OneNAND simulaotr data strucutres
- *
- * Initialize OneNAND simulator.
- */
-static int __init flash_init(struct onenand_flash *flash)
-{
- int density, size;
- int buffer_size;
-
- flash->base = kzalloc(131072, GFP_KERNEL);
- if (!flash->base) {
- printk(KERN_ERR "Unable to allocate base address.\n");
- return -ENOMEM;
- }
-
- density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
- size = ((16 << 20) << density);
-
- ONENAND_CORE(flash) = vmalloc(size + (size >> 5));
- if (!ONENAND_CORE(flash)) {
- printk(KERN_ERR "Unable to allocate nand core address.\n");
- kfree(flash->base);
- return -ENOMEM;
- }
-
- memset(ONENAND_CORE(flash), 0xff, size + (size >> 5));
-
- /* Setup registers */
- writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID);
- writew(device_id, flash->base + ONENAND_REG_DEVICE_ID);
- writew(version_id, flash->base + ONENAND_REG_VERSION_ID);
-
- if (density < 2)
- buffer_size = 0x0400; /* 1KiB page */
- else
- buffer_size = 0x0800; /* 2KiB page */
- writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE);
-
- return 0;
-}
-
-/**
- * flash_exit - Clean up OneNAND simulator
- * @param flash OneNAND simulaotr data strucutres
- *
- * Clean up OneNAND simulator.
- */
-static void flash_exit(struct onenand_flash *flash)
-{
- vfree(ONENAND_CORE(flash));
- kfree(flash->base);
- kfree(flash);
-}
-
-static int __init onenand_sim_init(void)
-{
- /* Allocate all 0xff chars pointer */
- ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL);
- if (!ffchars) {
- printk(KERN_ERR "Unable to allocate ff chars.\n");
- return -ENOMEM;
- }
- memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE);
-
- /* Allocate OneNAND simulator mtd pointer */
- info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
- if (!info) {
- printk(KERN_ERR "Unable to allocate core structures.\n");
- kfree(ffchars);
- return -ENOMEM;
- }
-
- /* Override write_word function */
- info->onenand.write_word = onenand_writew;
-
- if (flash_init(&info->flash)) {
- printk(KERN_ERR "Unable to allocat flash.\n");
- kfree(ffchars);
- kfree(info);
- return -ENOMEM;
- }
-
- info->parts = os_partitions;
-
- info->onenand.base = info->flash.base;
- info->onenand.priv = &info->flash;
-
- info->mtd.name = "OneNAND simulator";
- info->mtd.priv = &info->onenand;
- info->mtd.owner = THIS_MODULE;
-
- if (onenand_scan(&info->mtd, 1)) {
- flash_exit(&info->flash);
- kfree(ffchars);
- kfree(info);
- return -ENXIO;
- }
-
- add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions));
-
- return 0;
-}
-
-static void __exit onenand_sim_exit(void)
-{
- struct onenand_chip *this = info->mtd.priv;
- struct onenand_flash *flash = this->priv;
-
- onenand_release(&info->mtd);
- flash_exit(flash);
- kfree(ffchars);
- kfree(info);
-}
-
-module_init(onenand_sim_init);
-module_exit(onenand_sim_exit);
-
-MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
-MODULE_DESCRIPTION("The OneNAND flash simulator");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* This header file defines the registers and suspend/resume
- structures for the Geode GX and LX. The lxfb driver defines
- _GEODELX_ before including this file, which will unlock the
- extra registers that are only valid for LX.
-*/
-
-#ifndef _GEODE_REGS_H_
-#define _GEODE_REGS_H_
-
-/* MSRs */
-
-#define GX_VP_MSR_PAD_SELECT 0xC0002011
-#define LX_VP_MSR_PAD_SELECT 0x48000011
-
-#define GEODE_MSR_GLCP_DOTPLL 0x4c000015
-
-#define GLCP_DOTPLL_RESET (1 << 0)
-#define GLCP_DOTPLL_BYPASS (1 << 15)
-#define GLCP_DOTPLL_HALFPIX (1 << 24)
-#define GLCP_DOTPLL_LOCK (1 << 25)
-
-/* Registers */
-#define VP_FP_START 0x400
-
-
-#ifdef _GEODELX_
-
-#define GP_REG_SIZE 0x7C
-#define DC_REG_SIZE 0xF0
-#define VP_REG_SIZE 0x158
-#define FP_REG_SIZE 0x70
-
-#else
-
-#define GP_REG_SIZE 0x50
-#define DC_REG_SIZE 0x90
-#define VP_REG_SIZE 0x138
-#define FP_REG_SIZE 0x70
-
-#endif
-
-#define DC_PAL_SIZE 0x105
-
-struct geoderegs {
-
- struct {
- u64 padsel;
- u64 dotpll;
-
-#ifdef _GEODELX_
- u64 dfglcfg;
- u64 dcspare;
-#else
- u64 rstpll;
-#endif
- } msr;
-
- union {
- unsigned char b[GP_REG_SIZE];
- struct {
- u32 dst_offset; /* 0x00 */
- u32 src_offset; /* 0x04 */
- u32 stride; /* 0x08 */
- u32 wid_height; /* 0x0C */
- u32 src_color_fg; /* 0x10 */
- u32 src_color_bg; /* 0x14 */
- u32 pat_color_0; /* 0x18 */
- u32 pat_color_1; /* 0x1C */
- u32 pat_color_2; /* 0x20 */
- u32 pat_color_3; /* 0x24 */
- u32 pat_color_4; /* 0x28 */
- u32 pat_color_5; /* 0x2C */
- u32 pat_data_0; /* 0x30 */
- u32 pat_data_1; /* 0x34 */
- u32 raster_mode; /* 0x38 */
- u32 vector_mode; /* 0x3C */
- u32 blt_mode; /* 0x40 */
- u32 blit_status; /* 0x4C */
- u32 hst_src; /* 0x48 */
- u32 base_offset; /* 0x4C */
-
-#ifdef _GEODELX_
- u32 cmd_top; /* 0x50 */
- u32 cmd_bot; /* 0x54 */
- u32 cmd_read; /* 0x58 */
- u32 cmd_write; /* 0x5C */
- u32 ch3_offset; /* 0x60 */
- u32 ch3_mode_str; /* 0x64 */
- u32 ch3_width; /* 0x68 */
- u32 ch3_hsrc; /* 0x6C */
- u32 lut_index; /* 0x70 */
- u32 lut_data; /* 0x74 */
- u32 int_cntrl; /* 0x78 */
-#endif
- } r;
- } gp;
-
- union {
- unsigned char b[DC_REG_SIZE];
-
- struct {
- u32 unlock; /* 0x00 */
- u32 gcfg; /* 0x04 */
- u32 dcfg; /* 0x08 */
- u32 arb; /* 0x0C */
- u32 fb_st_offset; /* 0x10 */
- u32 cb_st_offset; /* 0x14 */
- u32 curs_st_offset; /* 0x18 */
- u32 icon_st_offset; /* 0x1C */
- u32 vid_y_st_offset; /* 0x20 */
- u32 vid_u_st_offset; /* 0x24 */
- u32 vid_v_st_offset; /* 0x28 */
- u32 dctop; /* 0x2c */
- u32 line_size; /* 0x30 */
- u32 gfx_pitch; /* 0x34 */
- u32 vid_yuv_pitch; /* 0x38 */
- u32 rsvd2; /* 0x3C */
- u32 h_active_timing; /* 0x40 */
- u32 h_blank_timing; /* 0x44 */
- u32 h_sync_timing; /* 0x48 */
- u32 rsvd3; /* 0x4C */
- u32 v_active_timing; /* 0x50 */
- u32 v_blank_timing; /* 0x54 */
- u32 v_sync_timing; /* 0x58 */
- u32 fbactive; /* 0x5C */
- u32 dc_cursor_x; /* 0x60 */
- u32 dc_cursor_y; /* 0x64 */
- u32 dc_icon_x; /* 0x68 */
- u32 dc_line_cnt; /* 0x6C */
- u32 rsvd5; /* 0x70 - palette address */
- u32 rsvd6; /* 0x74 - palette data */
- u32 dfifo_diag; /* 0x78 */
- u32 cfifo_diag; /* 0x7C */
- u32 dc_vid_ds_delta; /* 0x80 */
- u32 gliu0_mem_offset; /* 0x84 */
- u32 dv_ctl; /* 0x88 - added by LX */
- u32 dv_acc; /* 0x8C */
-
-#ifdef _GEODELX_
- u32 gfx_scale;
- u32 irq_filt_ctl;
- u32 filt_coeff1;
- u32 filt_coeff2;
- u32 vbi_event_ctl;
- u32 vbi_odd_ctl;
- u32 vbi_hor;
- u32 vbi_ln_odd;
- u32 vbi_ln_event;
- u32 vbi_pitch;
- u32 clr_key;
- u32 clr_key_mask;
- u32 clr_key_x;
- u32 clr_key_y;
- u32 irq;
- u32 rsvd8;
- u32 genlk_ctrl;
- u32 vid_even_y_st_offset; /* 0xD8 */
- u32 vid_even_u_st_offset; /* 0xDC */
- u32 vid_even_v_st_offset; /* 0xE0 */
- u32 v_active_even_timing; /* 0xE4 */
- u32 v_blank_even_timing; /* 0xE8 */
- u32 v_sync_even_timing; /* 0xEC */
-#endif
- } r;
- } dc;
-
- union {
- unsigned char b[VP_REG_SIZE];
-
- struct {
- u64 vcfg; /* 0x00 */
- u64 dcfg; /* 0x08 */
- u64 vx; /* 0x10 */
- u64 vy; /* 0x18 */
- u64 vs; /* 0x20 */
- u64 vck; /* 0x28 */
- u64 vcm; /* 0x30 */
- u64 rsvd1; /* 0x38 - Gamma address*/
- u64 rsvd2; /* 0x40 - Gamma data*/
- u64 rsvd3; /* 0x48 */
- u64 misc; /* 0x50 */
- u64 ccs; /* 0x58 */
- u64 rsvd4[3]; /* 0x60-0x70 */
- u64 vdc; /* 0x78 */
- u64 vco; /* 0x80 */
- u64 crc; /* 0x88 */
- u64 crc32; /* 0x90 */
- u64 vde; /* 0x98 */
- u64 cck; /* 0xA0 */
- u64 ccm; /* 0xA8 */
- u64 cc1; /* 0xB0 */
- u64 cc2; /* 0xB8 */
- u64 a1x; /* 0xC0 */
- u64 a1y; /* 0xC8 */
- u64 a1c; /* 0xD0 */
- u64 a1t; /* 0xD8 */
- u64 a2x; /* 0xE0 */
- u64 a2y; /* 0xE8 */
- u64 a2c; /* 0xF0 */
- u64 a2t; /* 0xF8 */
- u64 a3x; /* 0x100 */
- u64 a3y; /* 0x108 */
- u64 a3c; /* 0x110 */
- u64 a3t; /* 0x118 */
- u64 vrr; /* 0x120 */
- u64 awt; /* 0x128 */
- u64 vtm; /* 0x130 */
-#ifdef _GEODELX_
- u64 vye; /* 0x138 */
- u64 a1ye; /* 0x140 */
- u32 a2ye; /* 0x148 */
- u32 a3ye; /* 0x150 */
-#endif
- } r;
- } vp;
-
- union {
- unsigned char b[FP_REG_SIZE];
-
- struct {
- u64 pt1; /* 0x400 */
- u64 pt2; /* 0x408 */
- u64 pm; /* 0x410 */
- u64 dfc; /* 0x418 */
- u64 blfsr; /* 0x420 */
- u64 rlfsr; /* 0x428 */
- u64 fmi; /* 0x430 */
- u64 fmd; /* 0x438 */
- u64 rsvd; /* 0x440 */
- u64 dca; /* 0x448 */
- u64 dmd; /* 0x450 */
- u64 crc; /* 0x458 */
- u64 fbb; /* 0x460 */
- u64 crc32; /* 0x468 */
- } r;
- } fp;
-
- u32 pal[DC_PAL_SIZE];
- u32 gamma[256];
-};
-
-#endif
+++ /dev/null
-#include <linux/fb.h>
-#include <asm/io.h>
-#include <asm/msr.h>
-
-#include "geodefb.h"
-#include "video_gx.h"
-
-void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
-{
- int timeout = 1000;
-
- u64 rstpll, dotpll;
-
- rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
- rdmsrl(MSR_GLCP_DOTPLL, dotpll);
-
- dotpll &= 0x00000000ffffffffull;
- dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
-
- dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
- dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
-
- wrmsrl(MSR_GLCP_DOTPLL, dotpll);
-
- rstpll |= (regs->msr.rstpll &
- ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 |
- MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
- MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
-
- wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
- dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
- wrmsrl(MSR_GLCP_DOTPLL, dotpll);
-
- do {
- rdmsrl(MSR_GLCP_DOTPLL, dotpll);
- } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
-}
-
-/* FIXME: Make sure nothing is read to clear */
-
-void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
-{
- struct geodefb_par *par = info->par;
- int i;
-
- /* Wait for the BLT engine to stop being busy */
- while(readl(par->gp_regs + 0x44) & 0x05);
-
- rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
- rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
- rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
-
- writel(0x4758, par->dc_regs + 0x00);
-
- memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
- memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
- memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
- memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
-
- /* Save the palettes */
- writel(0, par->dc_regs + 0x70);
-
- for(i = 0; i < DC_PAL_SIZE; i++)
- regs->pal[i] = readl(par->dc_regs + 0x74);
-
- writel(0, par->vid_regs + 0x38);
-
- for(i = 0; i < 0xFF; i++)
- regs->gamma[i] = readl(par->vid_regs + 0x40);
-}
-
-void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
-{
- struct geodefb_par *par = info->par;
- u32 val, i;
-
- /* DOTPLL */
- gx_set_dotpll(info, regs);
-
- /* GP */
-
- writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
- writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
- writel(regs->gp.r.stride, par->gp_regs + 0x08);
- writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
- writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
- writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
- writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
- writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
- writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
- writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
- writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
- writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
- writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
- writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
-
- /* Don't write the raster / vector / blt mode regs */
- /* status register is read only */
-
- writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
- writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
-
- /* DC */
-
- /* Write the unlock value */
- writel(0x4758, par->dc_regs + 0x00);
-
- writel(0, par->dc_regs + 0x70);
-
- for(i = 0; i < DC_PAL_SIZE; i++)
- writel(regs->pal[i], par->dc_regs + 0x74);
-
- /* Write the gcfg register without the enables */
- writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
-
- /* Write the vcfg register without the enables */
- writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
-
- /* Write the rest of the active registers */
-
- writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
- writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
- writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
- writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
- writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
- writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
- writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
- writel(regs->dc.r.line_size, par->dc_regs + 0x30);
- writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
- writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
- writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
- writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
- writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
- writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
- writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
- writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
- writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
- writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
- writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
-
- /* Don't write the line_cnt or diag registers */
-
- writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
- writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
- writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
-
- /* VP */
-
- /* MSR */
- wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
-
- writel(0, par->vid_regs + 0x38);
-
- for(i = 0; i < 0xFF; i++)
- writel((u32) regs->gamma[i], par->vid_regs + 0x40);
-
- /* Don't enable video yet */
- writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
-
- /* Don't enable the CRT yet */
- writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
-
- /* Write the rest of the VP registers */
-
- writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
- writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
- writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
- writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
- writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
- writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
- writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
- writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
- writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
- writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
- writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
- writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
- writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
- writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
- writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
- writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
- writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
- writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
- writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
- writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
- writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
- writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
- writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
- writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
- writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
- writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
- writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
- writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
-
-
- /* FP registers */
-
- writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
- writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
-
- writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
- writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
- writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
- writel(regs->fp.r.fmi, par->vid_regs + 0x430);
- writel(regs->fp.r.fmd, par->vid_regs + 0x438);
- writel(regs->fp.r.dca, par->vid_regs + 0x448);
- writel(regs->fp.r.dmd, par->vid_regs + 0x450);
- writel(regs->fp.r.crc, par->vid_regs + 0x458);
- writel(regs->fp.r.fbb, par->vid_regs + 0x460);
-
- /* Final enables */
-
- val = readl(par->vid_regs + 0x410);
-
- /* Control the panel */
- if (regs->fp.r.pm & (1 << 24)) {
-
- if (!(val & 0x09))
- writel(regs->fp.r.pm, par->vid_regs + 0x410);
- }
- else {
- if (!(val & 0x05))
- writel(regs->fp.r.pm, par->vid_regs + 0x410);
- }
-
- /* Turn everything on */
-
- writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
- writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
- writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
- writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
-}
-
-
-#ifdef DEBUG
-
-void dump_regs(struct fb_info *info, int mode) {
-
- struct geodefb_par *par = info->par;
- u32 val;
- int i;
-
- if (mode == 0) {
- for(i = 0; i < GP_REG_SIZE; i += 4) {
- val = readl(par->gp_regs + i);
- }
- }
-
- if (mode == 1) {
- writel(0x4758, par->dc_regs + 0x00);
-
- for(i = 0; i < DC_REG_SIZE; i += 4) {
- val = readl(par->dc_regs + i);
- printk("DC%x: %x\n", i, val);
- }
- }
-
- if (mode == 2) {
- for(i = 0; i < VP_REG_SIZE; i += 8) {
- val = readl(par->vid_regs + i);
- printk("VP%x: %x\n", i, val);
- }
- }
-
- if (mode == 3) {
- for(i = 0; i < FP_REG_SIZE; i += 8) {
- val = readl(par->vid_regs + 0x400 + i);
- printk("FP%x: %x\n", i, val);
- }
- }
-}
-
-#endif
+++ /dev/null
-/*
- * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
- *
- * Copyright © 2006-2007 Red Hat, Inc.
- * Copyright © 2006-2007 Advanced Micro Devices, Inc.
- *
- * This program is free software. You can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-id.h>
-#include <linux/pci.h>
-#include <linux/vt_kern.h>
-#include <linux/pci_ids.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/backlight.h>
-#include <linux/device.h>
-#include <asm/uaccess.h>
-#include <linux/ctype.h>
-#include <linux/reboot.h>
-#include <asm/tsc.h>
-#include <asm/olpc.h>
-
-#include "olpc_dcon.h"
-
-/* Module definitions */
-
-static int resumeline = 898;
-module_param(resumeline, int, 0444);
-
-static int noinit;
-module_param(noinit, int, 0444);
-
-/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
-static int useaa = 1;
-module_param(useaa, int, 0444);
-
-/* I2C structures */
-
-static struct i2c_driver dcon_driver;
-static struct i2c_client *dcon_client;
-
-/* Platform devices */
-static struct platform_device *dcon_device;
-
-/* Backlight device */
-static struct backlight_device *dcon_bl_dev;
-
-/* Base address of the GPIO registers */
-static unsigned long gpio_base;
-
-static struct fb_info *fbinfo;
-
-/* Current source, initialized at probe time */
-static int dcon_source;
-
-/* Desired source */
-static int dcon_pending;
-
-/* Current output type */
-static int dcon_output = DCON_OUTPUT_COLOR;
-
-/* Current sleep status (not yet implemented) */
-static int dcon_sleep_val = DCON_ACTIVE;
-
-/* Shadow register for the DCON_REG_MODE register */
-static unsigned short dcon_disp_mode;
-
-/* Variables used during switches */
-static int dcon_switched;
-
-static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
-
-static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD;
-
-#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
-#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
-
-/* The current backlight value - this saves us some smbus traffic */
-static int bl_val = -1;
-
-/* ===== API functions - these are called by a variety of users ==== */
-
-/* Backlight notes - turning off the backlight enable bit in the DCON
- * doesn't save us any power over just pushing the BL to zero, so we
- * don't use that bit in this code.
- */
-
-static int dcon_get_backlight(void)
-{
- if (dcon_client == NULL)
- return 0;
-
- if (bl_val == -1)
- bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
-
- return bl_val;
-}
-
-static void dcon_set_backlight(int level)
-{
- if (dcon_client == NULL)
- return;
-
- if (bl_val == (level & 0x0F))
- return;
-
- bl_val = level & 0x0F;
- dcon_write(DCON_REG_BRIGHT, bl_val);
-
- /* Purposely turn off the backlight when we go to level 0 */
-
- if (bl_val == 0) {
- dcon_disp_mode &= ~MODE_BL_ENABLE;
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
- }
- else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
- dcon_disp_mode |= MODE_BL_ENABLE;
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
- }
-}
-
-/* Set the output type to either color or mono */
-
-static int dcon_set_output(int arg)
-{
- if (dcon_output == arg)
- return 0;
-
- dcon_output = arg;
-
- if (arg == DCON_OUTPUT_MONO) {
- dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
- dcon_disp_mode |= MODE_MONO_LUMA;
- }
- else {
- dcon_disp_mode &= ~(MODE_MONO_LUMA);
- dcon_disp_mode |= MODE_CSWIZZLE;
- if (useaa)
- dcon_disp_mode |= MODE_COL_AA;
- }
-
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
- return 0;
-}
-
-/* For now, this will be really stupid - we need to address how
- * DCONLOAD works in a sleep and account for it accordingly
- */
-
-static void dcon_sleep(int state)
-{
- /* Turn off the backlight and put the DCON to sleep */
-
- if (state == dcon_sleep_val)
- return;
-
- if (state == DCON_SLEEP) {
- dcon_disp_mode &= ~MODE_BL_ENABLE;
- dcon_disp_mode |= MODE_SLEEP;
- }
- else {
- /* Only re-enable the backlight if the backlight value is set */
-
- if (bl_val != 0)
- dcon_disp_mode |= MODE_BL_ENABLE;
-
- dcon_disp_mode &= ~MODE_SLEEP;
- }
-
- dcon_sleep_val = state;
- dcon_write(DCON_REG_MODE, dcon_disp_mode);
-
- /* We should turn off some stuff in the framebuffer - but what? */
-}
-
-/* Set the source of the display (CPU or DCON) */
-
-static void dcon_source_switch(struct work_struct *work)
-{
- DECLARE_WAITQUEUE(wait, current);
- int source = dcon_pending;
-
- if (dcon_source == source)
- return;
-
- dcon_switched = 0;
-
- switch (source) {
- case DCON_SOURCE_CPU:
-
- /* Enable the scanline interrupt bit */
- if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
- printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n");
- else {
- /* Wait up to one second for the scanline interrupt */
- wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
- }
-
- if (!dcon_switched)
- printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n");
-
- /*
- * Ideally we'd like to disable interrupts here so that the
- * fb_powerup and DCON turn on happen at a known time value;
- * however, we can't do that right now with fb_set_suspend
- * messing with semaphores.
- *
- * For now, we just hope..
- */
- if (fb_powerup(fbinfo)) {
- printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n");
- dcon_pending = DCON_SOURCE_DCON;
- return;
- }
-
- /* And turn off the DCON */
- outl(1<<11, gpio_base + GPIOx_OUT_VAL);
-
- /* Turn off the scanline interrupt */
- if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
- printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n");
-
- printk(KERN_INFO "olpc-dcon: The CPU has control\n");
- break;
- case DCON_SOURCE_DCON:
- {
- int t;
-
- add_wait_queue(&dcon_wait_queue, &wait);
- set_current_state(TASK_UNINTERRUPTIBLE);
-
- /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
- control */
-
- outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
-
- t = schedule_timeout(HZ/2);
- remove_wait_queue(&dcon_wait_queue, &wait);
- set_current_state(TASK_RUNNING);
-
- if (!dcon_switched)
- printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
-
- /* Turn off the graphics engine completely */
- fb_powerdown(fbinfo);
-
- printk(KERN_INFO "olpc-dcon: The DCON has control\n");
- break;
- }
- default:
- BUG();
- }
-
- dcon_source = source;
-}
-
-static DECLARE_WORK(dcon_work, dcon_source_switch);
-
-static int dcon_set_source(int arg)
-{
- if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
- return -EINVAL;
-
- if (dcon_pending == arg)
- return 0;
-
- dcon_pending = arg;
- if ((dcon_source != arg) && !work_pending(&dcon_work))
- schedule_work(&dcon_work);
-
- return 0;
-}
-
-static int dcon_set_source_sync(int arg)
-{
- int ret = dcon_set_source(arg);
- if (!ret)
- flush_scheduled_work();
- return ret;
-}
-
-static int dconbl_set(struct backlight_device *dev) {
-
- int level = dev->props.brightness;
-
- if (dev->props.power != FB_BLANK_UNBLANK)
- level = 0;
-
- dcon_set_backlight(level);
- return 0;
-}
-
-static int dconbl_get(struct backlight_device *dev) {
- return dcon_get_backlight();
-}
-
-static ssize_t dcon_mode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%4.4X\n", dcon_disp_mode);
-}
-
-static ssize_t dcon_sleep_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", dcon_sleep_val);
-}
-
-static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
- return sprintf(buf, "%d\n", dcon_source);
-}
-
-static ssize_t dcon_freeze_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
-}
-
-static ssize_t dcon_output_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", dcon_output);
-}
-
-static ssize_t dcon_resumeline_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%d\n", resumeline);
-}
-
-static int _strtoul(const char *buf, int len, unsigned int *val)
-{
-
- char *endp;
- unsigned int output = simple_strtoul(buf, &endp, 0);
- int size = endp - buf;
-
- if (*endp && isspace(*endp))
- size++;
-
- if (size != len)
- return -EINVAL;
-
- *val = output;
- return 0;
-}
-
-static ssize_t dcon_output_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
- int rc = -EINVAL;
-
- if (_strtoul(buf, count, &output))
- return -EINVAL;
-
- if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
- dcon_set_output(output);
- rc = count;
- }
-
- return rc;
-}
-
-static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
- int rc = -EINVAL;
-
- printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
- if (_strtoul(buf, count, &output))
- return -EINVAL;
-
- dcon_set_source(output);
- rc = count;
-
- return rc;
-}
-
-static ssize_t dcon_freeze_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
- int rc = -EINVAL;
-
- if (_strtoul(buf, count, &output))
- return rc;
-
- dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
- rc = count;
-
- return rc;
-}
-
-static ssize_t dcon_resumeline_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int rl;
- int rc = -EINVAL;
-
- if (_strtoul(buf, count, &rl))
- return rc;
-
- resumeline = rl;
- dcon_write(DCON_REG_SCAN_INT, resumeline);
- rc = count;
-
- return rc;
-}
-
-static ssize_t dcon_sleep_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- int output;
-
- if (_strtoul(buf, count, &output))
- return -EINVAL;
-
- dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
- return count;
-}
-
-static struct device_attribute dcon_device_files[] = {
- __ATTR(mode, 0444, dcon_mode_show, NULL),
- __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
- __ATTR(source, 0644, dcon_source_show, dcon_source_store),
- __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
- __ATTR(output, 0644, dcon_output_show, dcon_output_store),
- __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
-};
-
-static struct backlight_ops dcon_bl_ops = {
- .get_brightness = dconbl_get,
- .update_status = dconbl_set
-};
-
-/* List of GPIOs that we care about:
- (in) GPIO12 -- DCONBLNK
- (in) GPIO[56] -- DCONSTAT[01]
- (out) GPIO11 -- DCONLOAD
-*/
-
-#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
-#define OUT_GPIOS (1<<11)
-
-static irqreturn_t dcon_interrupt(int, void *);
-
-static int dcon_request_irq(void)
-{
- unsigned long lo, hi;
- unsigned char lob;
-
- rdmsr(MSR_LBAR_GPIO, lo, hi);
-
- /* Check the mask and whether GPIO is enabled (sanity check) */
- if (hi != 0x0000f001) {
- printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
- return -ENODEV;
- }
-
- /* Mask off the IO base address */
- gpio_base = lo & 0x0000ff00;
-
- /* Turn off the event enable for GPIO7 just to be safe */
- outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
-
- /* Set the directions for the GPIO pins */
- outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
- outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
-
- /* Set up the interrupt mappings */
-
- /* Set the IRQ to pair 2 */
- geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
-
- /* Enable group 2 to trigger the DCON interrupt */
- geode_gpio_set_irq(2, DCON_IRQ);
-
- /* Select edge level for interrupt (in PIC) */
-
- lob = inb(0x4d0);
- lob &= ~(1 << DCON_IRQ);
- outb(lob, 0x4d0);
-
- /* Register the interupt handler */
- if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
- return -EIO;
-
- /* Clear INV_EN for GPIO7 (DCONIRQ) */
- outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
-
- /* Enable filter for GPIO12 (DCONBLANK) */
- outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
-
- /* Disable filter for GPIO7 */
- outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
-
- /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
-
- outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
- outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
-
- /* Add GPIO12 to the Filter Event Pair #7 */
- outb(12, gpio_base + GPIO_FE7_SEL);
-
- /* Turn off negative Edge Enable for GPIO12 */
- outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
-
- /* Enable negative Edge Enable for GPIO7 */
- outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
-
- /* Zero the filter amount for Filter Event Pair #7 */
- outw(0, gpio_base + GPIO_FLT7_AMNT);
-
- /* Clear the negative edge status for GPIO7 and GPIO12 */
- outl((1<<7) | (1<<12), gpio_base+0x4c);
-
- /* FIXME: Clear the posiitive status as well, just to be sure */
- outl((1<<7) | (1<<12), gpio_base+0x48);
-
- /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
- outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
-
- /* Determine the current state by reading the GPIO bit */
- /* Earlier stages of the boot process have established the state */
- dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
- ? DCON_SOURCE_CPU
- : DCON_SOURCE_DCON;
- dcon_pending = dcon_source;
-
- return 0;
-}
-
-static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
-{
- if (dcon_client == NULL)
- return 0;
-
- /* Turn off the DCON. Entirely. */
- dcon_write(DCON_REG_MODE, 0x39);
- dcon_write(DCON_REG_MODE, 0x32);
- return 0;
-}
-
-static int dcon_conswitch_notify(struct notifier_block *nb,
- unsigned long mode, void *dummy)
-{
- if (mode == CONSOLE_EVENT_SWITCH_TEXT)
- dcon_sleep(DCON_ACTIVE);
-
- return 0;
-}
-
-static struct notifier_block dcon_nb = {
- .notifier_call = dcon_reboot_notify,
- .priority = -1,
-};
-
-static struct notifier_block dcon_console_nb = {
- .notifier_call = dcon_conswitch_notify,
- .priority = -1,
-};
-
-static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
-{
- struct i2c_client *client;
- uint16_t ver;
- int rc, i;
-
- if (!olpc_has_dcon()) {
- printk("olpc-dcon: No DCON is attached.\n");
- return -ENODEV;
- }
-
- if (num_registered_fb >= 1)
- fbinfo = registered_fb[0];
-
- if (adap->id != I2C_HW_SMBUS_SCX200) {
- printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
- adap->id, I2C_HW_SMBUS_SCX200);
- return -ENXIO;
- }
-
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
-
- strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
- client->addr = addr;
- client->adapter = adap;
- client->driver = &dcon_driver;
-
- if ((rc = i2c_attach_client(client)) != 0) {
- printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
- goto eclient;
- }
-
- ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
-
- if ((ver >> 8) != 0xDC) {
- printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x instead.\n", ver);
- rc = -ENXIO;
- goto ei2c;
- }
-
- if ((rc = dcon_request_irq())) {
- printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n");
- goto ei2c;
- }
-
- if (ver < 0xdc02 && !noinit) {
- /* Initialize the DCON registers */
-
- /* Start with work-arounds for DCON ASIC */
- i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
- i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
- i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
- i2c_smbus_write_word_data(client, 0x0b, 0x007a);
- i2c_smbus_write_word_data(client, 0x36, 0x025c);
- i2c_smbus_write_word_data(client, 0x37, 0x025e);
-
- /* Initialise SDRAM */
-
- i2c_smbus_write_word_data(client, 0x3b, 0x002b);
- i2c_smbus_write_word_data(client, 0x41, 0x0101);
- i2c_smbus_write_word_data(client, 0x42, 0x0101);
- }
-
- /* Colour swizzle, AA, no passthrough, backlight */
-
- dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
- if (useaa)
- dcon_disp_mode |= MODE_COL_AA;
- i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
-
-
- /* Set the scanline to interrupt on during resume */
-
- i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
-
- /* Add the DCON device */
-
- dcon_device = platform_device_alloc("dcon", -1);
-
- if (dcon_device == NULL) {
- printk(KERN_ERR "dcon: Unable to create the DCON device\n");
- rc = -ENOMEM;
- goto eirq;
- }
-
- if ((rc = platform_device_add(dcon_device))) {
- printk(KERN_ERR "dcon: Unable to add the DCON device\n");
- goto edev;
- }
-
- for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
- device_create_file(&dcon_device->dev, &dcon_device_files[i]);
-
- /* Add the backlight device for the DCON */
-
- dcon_client = client;
-
- dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
- NULL, &dcon_bl_ops);
-
- if (IS_ERR(dcon_bl_dev)) {
- printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
- dcon_bl_dev = NULL;
- }
- else {
- dcon_bl_dev->props.max_brightness = 15;
- dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
- dcon_bl_dev->props.brightness = dcon_get_backlight();
-
- backlight_update_status(dcon_bl_dev);
- }
-
- register_reboot_notifier(&dcon_nb);
- console_event_register(&dcon_console_nb);
-
- printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n", ver & 0xFF);
-
- return 0;
-
- edev:
- platform_device_unregister(dcon_device);
- dcon_device = NULL;
- eirq:
- free_irq(DCON_IRQ, &dcon_driver);
- ei2c:
- i2c_detach_client(client);
- eclient:
- kfree(client);
-
- return rc;
-}
-
-static int dcon_attach(struct i2c_adapter *adap)
-{
- int ret;
-
- ret = i2c_probe(adap, &addr_data, dcon_probe);
-
- if (dcon_client == NULL)
- printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
-
- return ret;
-}
-
-static int dcon_detach(struct i2c_client *client)
-{
- int rc;
- dcon_client = NULL;
-
- unregister_reboot_notifier(&dcon_nb);
- console_event_unregister(&dcon_console_nb);
-
- free_irq(DCON_IRQ, &dcon_driver);
-
- if ((rc = i2c_detach_client(client)) == 0)
- kfree(i2c_get_clientdata(client));
-
- if (dcon_bl_dev != NULL)
- backlight_device_unregister(dcon_bl_dev);
-
- if (dcon_device != NULL)
- platform_device_unregister(dcon_device);
- cancel_work_sync(&dcon_work);
-
- return rc;
-}
-
-
-#ifdef CONFIG_PM
-static int dcon_suspend(struct i2c_client *client, pm_message_t state)
-{
- if (dcon_sleep_val != DCON_ACTIVE)
- return 0;
-
- /* Set up the DCON to have the source */
- return dcon_set_source_sync(DCON_SOURCE_DCON);
-}
-
-static int dcon_resume(struct i2c_client *client)
-{
- int x;
- if (dcon_sleep_val != DCON_ACTIVE)
- return 0;
-
- /* HACK: ensure the bus is stable */
- do {
- x = dcon_read(DCON_REG_ID);
- } while (x < 0);
-
- return dcon_set_source(DCON_SOURCE_CPU);
-}
-
-#endif
-
-static irqreturn_t dcon_interrupt(int irq, void *id)
-{
- int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
-
- /* Clear the negative edge status for GPIO7 */
- outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
-
- switch (status & 3) {
- case 3:
- printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
- break;
- case 2: /* switch to DCON mode */
- case 1: /* switch to CPU mode */
- dcon_switched = 1;
- wake_up(&dcon_wait_queue);
- break;
- case 0:
- printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
- }
-
- return IRQ_HANDLED;
-}
-
-static struct i2c_driver dcon_driver = {
- .driver = {
- .name = "OLPC-DCON",
- },
- .id = I2C_DRIVERID_DCON,
- .attach_adapter = dcon_attach,
- .detach_client = dcon_detach,
-#ifdef CONFIG_PM
- .suspend = dcon_suspend,
- .resume = dcon_resume,
-#endif
-};
-
-
-static int __init olpc_dcon_init(void)
-{
- i2c_add_driver(&dcon_driver);
- return 0;
-}
-
-static void __exit olpc_dcon_exit(void)
-{
- i2c_del_driver(&dcon_driver);
-}
-
-module_init(olpc_dcon_init);
-module_exit(olpc_dcon_exit);
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-#ifndef OLPC_DCON_H_
-#define OLPC_DCON_H_
-
-/* DCON registers */
-
-#define DCON_REG_ID 0
-#define DCON_REG_MODE 1
-
-#define MODE_PASSTHRU (1<<0)
-#define MODE_SLEEP (1<<1)
-#define MODE_SLEEP_AUTO (1<<2)
-#define MODE_BL_ENABLE (1<<3)
-#define MODE_BLANK (1<<4)
-#define MODE_CSWIZZLE (1<<5)
-#define MODE_COL_AA (1<<6)
-#define MODE_MONO_LUMA (1<<7)
-#define MODE_SCAN_INT (1<<8)
-#define MODE_CLOCKDIV (1<<9)
-#define MODE_DEBUG (1<<14)
-#define MODE_SELFTEST (1<<15)
-
-#define DCON_REG_HRES 2
-#define DCON_REG_HTOTAL 3
-#define DCON_REG_HSYNC_WIDTH 4
-#define DCON_REG_VRES 5
-#define DCON_REG_VTOTAL 6
-#define DCON_REG_VSYNC_WIDTH 7
-#define DCON_REG_TIMEOUT 8
-#define DCON_REG_SCAN_INT 9
-#define DCON_REG_BRIGHT 10
-
-/* GPIO registers (CS5536) */
-
-#define MSR_LBAR_GPIO 0x5140000C
-
-#define GPIOx_OUT_VAL 0x00
-#define GPIOx_OUT_EN 0x04
-#define GPIOx_IN_EN 0x20
-#define GPIOx_INV_EN 0x24
-#define GPIOx_IN_FLTR_EN 0x28
-#define GPIOx_EVNTCNT_EN 0x2C
-#define GPIOx_READ_BACK 0x30
-#define GPIOx_EVNT_EN 0x38
-#define GPIOx_NEGEDGE_EN 0x44
-#define GPIOx_NEGEDGE_STS 0x4C
-#define GPIO_FLT7_AMNT 0xD8
-#define GPIO_MAP_X 0xE0
-#define GPIO_MAP_Y 0xE4
-#define GPIO_FE7_SEL 0xF7
-
-
-/* Status values */
-
-#define DCONSTAT_SCANINT 0
-#define DCONSTAT_SCANINT_DCON 1
-#define DCONSTAT_DISPLAYLOAD 2
-#define DCONSTAT_MISSED 3
-
-/* Source values */
-
-#define DCON_SOURCE_DCON 0
-#define DCON_SOURCE_CPU 1
-
-/* Output values */
-#define DCON_OUTPUT_COLOR 0
-#define DCON_OUTPUT_MONO 1
-
-/* Sleep values */
-#define DCON_ACTIVE 0
-#define DCON_SLEEP 1
-
-/* Interrupt */
-#define DCON_IRQ 6
-
-#endif
+++ /dev/null
-/*
- * Definitions for Open Firmware client interface on 32-bit system.
- * OF Cell size is 4. Integer properties are encoded big endian,
- * as with all OF implementations.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _OFW_H
-#define _OFW_H
-
-extern int ofw(char *, int, int, ...);
-
-#endif
+++ /dev/null
-/* OLPC machine specific definitions */
-
-#ifndef ASM_OLPC_H_
-#define ASM_OLPC_H_
-
-#include <asm/geode.h>
-
-struct olpc_platform_t {
- int flags;
- int boardrev;
- int ecver;
-};
-
-#define OLPC_F_PRESENT 0x01
-#define OLPC_F_DCON 0x02
-#define OLPC_F_VSA 0x04
-
-enum
-{
- OLPC_REV_A = 0,
-
- OLPC_REV_PRE_B1,
- OLPC_REV_B1,
- OLPC_REV_PRE_B2,
- OLPC_REV_B2,
- OLPC_REV_PRE_B3,
- OLPC_REV_B3,
- OLPC_REV_B4,
- OLPC_REV_C1,
- OLPC_REV_R1,
- OLPC_REV_UNKNOWN /* this should always come last */
-};
-
-#ifndef CONFIG_OLPC
-
-static inline int machine_is_olpc(void) { return 0; }
-static inline int olpc_has_dcon(void) { return 0; }
-static inline int olpc_has_vsa(void) { return 0; }
-static inline int olpc_get_rev(void) { return OLPC_REV_UNKNOWN; }
-
-#else
-
-extern struct olpc_platform_t olpc_platform_info;
-
-static inline int
-machine_is_olpc(void)
-{
- return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
-}
-
-static inline int
-olpc_has_dcon(void)
-{
- return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
-}
-
-static inline int
-olpc_has_vsa(void)
-{
- return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-static inline int
-olpc_get_rev(void)
-{
- return olpc_platform_info.boardrev;
-}
-
-static inline int
-olpc_rev_after(int rev)
-{
- return olpc_platform_info.boardrev > rev &&
- olpc_platform_info.boardrev != OLPC_REV_UNKNOWN;
-}
-
-static inline int
-olpc_rev_before(int rev)
-{
- return olpc_platform_info.boardrev < rev ||
- olpc_platform_info.boardrev == OLPC_REV_UNKNOWN;
-}
-
-#endif
-
-/* EC functions */
-
-int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
- unsigned char *outbuf, size_t outlen);
-
-void olpc_register_battery_callback(void (*f)(unsigned long));
-void olpc_deregister_battery_callback(void);
-
-/* EC commands and responses */
-
-/* SCI source values */
-
-#define EC_SCI_SRC_EMPTY 0x00
-#define EC_SCI_SRC_GAME 0x01
-#define EC_SCI_SRC_BATTERY 0x02
-#define EC_SCI_SRC_BATSOC 0x04
-#define EC_SCI_SRC_BATERR 0x08
-#define EC_SCI_SRC_EBOOK 0x10
-#define EC_SCI_SRC_WLAN 0x20
-#define EC_SCI_SRC_ACPWR 0x40
-
-/* GPIO assignments */
-
-#define OLPC_GPIO_MIC_AC 1
-#define OLPC_GPIO_DCON_IRQ 7
-#define OLPC_GPIO_THRM_ALRM 10
-#define OLPC_GPIO_WORKAUX 24
-#define OLPC_GPIO_LID 26
-#define OLPC_GPIO_ECSCI 27
-
-#endif
-
+++ /dev/null
-#ifndef _I386_PROM_H
-#define _I386_PROM_H
-#ifdef __KERNEL__
-
-
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
- * Updates for SPARC64 by David S. Miller
- * Updates for i386/OLPC by Andres Salomon
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <asm/atomic.h>
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
- char *name;
- int length;
- void *value;
- struct property *next;
-};
-
-struct device_node {
- const char *name;
- const char *type;
- phandle node;
-// phandle linux_phandle;
- char *path_component_name;
- char *full_name;
-
- struct property *properties;
- struct property *deadprops; /* removed properties */
- struct device_node *parent;
- struct device_node *child;
- struct device_node *sibling;
- struct device_node *next; /* next device of same type */
- struct device_node *allnext; /* next in list of all nodes */
- struct proc_dir_entry *pde; /* this node's proc directory */
- struct kref kref;
- unsigned long _flags;
- void *data;
-};
-
-/* flag descriptions */
-#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
-
-#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-
-#define OF_BAD_ADDR ((u64)-1)
-
-static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
- dn->pde = de;
-}
-
-extern struct device_node *of_find_node_by_name(struct device_node *from,
- const char *name);
-#define for_each_node_by_name(dn, name) \
- for (dn = of_find_node_by_name(NULL, name); dn; \
- dn = of_find_node_by_name(dn, name))
-extern struct device_node *of_find_node_by_type(struct device_node *from,
- const char *type);
-#define for_each_node_by_type(dn, type) \
- for (dn = of_find_node_by_type(NULL, type); dn; \
- dn = of_find_node_by_type(dn, type))
-extern struct device_node *of_find_compatible_node(struct device_node *from,
- const char *type, const char *compat);
-extern struct device_node *of_find_node_by_path(const char *path);
-extern struct device_node *of_find_node_by_phandle(phandle handle);
-extern struct device_node *of_get_parent(const struct device_node *node);
-extern struct device_node *of_get_next_child(const struct device_node *node,
- struct device_node *prev);
-extern struct property *of_find_property(const struct device_node *np,
- const char *name,
- int *lenp);
-//extern struct device_node *of_node_get(struct device_node *node);
-//extern void of_node_put(struct device_node *node);
-extern int of_device_is_compatible(const struct device_node *device,
- const char *);
-extern const void *of_get_property(const struct device_node *node,
- const char *name,
- int *lenp);
-#define get_property(node,name,lenp) of_get_property(node,name,lenp)
-extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
-extern int of_getintprop_default(struct device_node *np,
- const char *name,
- int def);
-extern int of_n_addr_cells(struct device_node *np);
-extern int of_n_size_cells(struct device_node *np);
-
-extern void prom_build_devicetree(void);
-
-#endif /* __KERNEL__ */
-#endif
+++ /dev/null
-/*
- * Driver model for batteries
- *
- * © 2006 David Woodhouse <dwmw2@infradead.org>
- *
- * Based on LED Class support, by John Lenz and Richard Purdie:
- *
- * © 2005 John Lenz <lenz@cs.wisc.edu>
- * © 2005-2006 Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __LINUX_BATTERY_H__
-#define __LINUX_BATTERY_H__
-
-struct device;
-struct class_device;
-
-/*
- * Battery Core
- */
-#define PWRDEV_TYPE_BATTERY 0
-#define PWRDEV_TYPE_AC 1
-
-#define BAT_STAT_PRESENT (1<<0)
-#define BAT_STAT_LOW (1<<1)
-#define BAT_STAT_FULL (1<<2)
-#define BAT_STAT_CHARGING (1<<3)
-#define BAT_STAT_DISCHARGING (1<<4)
-#define BAT_STAT_OVERTEMP (1<<5)
-#define BAT_STAT_CRITICAL (1<<6)
-#define BAT_STAT_FIRE (1<<7)
-#define BAT_STAT_CHARGE_DONE (1<<8)
-
-/* Thou shalt not export any attributes in sysfs except these, and
- with these units: */
-#define BAT_INFO_STATUS "status" /* Not free-form. Use
- provided function */
-#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */
-#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */
-
-#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */
-#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */
-
-#define BAT_INFO_VOLTAGE "voltage" /* mV */
-#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */
-
-#define BAT_INFO_CURRENT "current" /* mA */
-#define BAT_INFO_CURRENT_NOW "current_now" /* mA */
-
-#define BAT_INFO_POWER "power" /* mW */
-#define BAT_INFO_POWER_NOW "power_now" /* mW */
-
-/* The following capacity/charge properties are represented in either
- mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
-#define BAT_INFO_RATE "rate" /* CAP_UNITS */
-#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */
-#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be
- either mA or mW */
-
-#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */
-
-#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */
-#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */
-#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */
-#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */
-
-#define BAT_INFO_MANUFACTURER "manufacturer" /* string */
-#define BAT_INFO_TECHNOLOGY "technology" /* string */
-#define BAT_INFO_MODEL "model" /* string */
-#define BAT_INFO_SERIAL "serial" /* string */
-#define BAT_INFO_OEM_INFO "oem_info" /* string */
-
-#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */
-#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */
-#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */
-
-struct battery_dev {
- int status_cap;
- int id;
- int type;
- const char *name;
-
- struct device *dev;
-};
-
-int battery_device_register(struct device *parent,
- struct battery_dev *battery_cdev);
-void battery_device_unregister(struct battery_dev *battery_cdev);
-
-
-ssize_t battery_attribute_show_status(char *buf, unsigned long status);
-ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
-#endif /* __LINUX_BATTERY_H__ */
+++ /dev/null
-#include <sound/driver.h>
-#include <sound/core.h>
-#include <sound/info.h>
-#include <sound/control.h>
-#include <sound/ac97_codec.h>
-
-#include <asm/olpc.h>
-#include "cs5535audio.h"
-
-/*
- * OLPC has an additional feature on top of the regular AD1888 codec features.
- * It has an Analog Input mode that is switched into (after disabling the
- * High Pass Filter) via GPIO. It is only supported on B2 and later models.
- */
-
-int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
-{
- int err;
-
- /*
- * update the High Pass Filter (via AC97_AD_TEST2), and then set
- * Analog Input mode through a GPIO.
- */
-
- if (val) {
- err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
- 1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
- geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
- }
- else {
- err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
- 1<<AC97_AD_HPFD_SHIFT, 0);
- geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
- }
- if (err < 0)
- snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(olpc_ai_enable);
-
-static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
-}
-
-static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
- GPIO_OUTPUT_VAL);
- return 0;
-}
-
-static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
- struct snd_ac97 *ac97 = cs5535au->ac97;
-
- olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
-
- return 1;
-}
-
-static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
-{
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "DC Mode Enable",
- .info = snd_cs5535audio_ai_info,
- .get = snd_cs5535audio_ai_get,
- .put = snd_cs5535audio_ai_put,
- .private_value = 0
-};
-
-void __devinit olpc_prequirks(struct snd_card *card,
- struct snd_ac97_template *ac97)
-{
- /* Bail if this isn't an OLPC platform */
- if (!machine_is_olpc())
- return;
-
- /* If on an OLPC B3 or higher, invert EAPD. */
- if (olpc_rev_after(OLPC_REV_B2))
- ac97->scaps |= AC97_SCAP_INV_EAPD;
-}
-
-int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
-{
- struct snd_ctl_elem_id elem;
-
- /* Bail if this isn't an OLPC platform */
- if (!machine_is_olpc())
- return 0;
-
- /* drop the original ad1888 HPF control */
- memset(&elem, 0, sizeof(elem));
- elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
- strcpy(elem.name, "High Pass Filter Enable");
- snd_ctl_remove_id(card, &elem);
-
- /* add the override for OLPC's HPF */
- return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
- ac97->private_data));
-}
endif
define Image/Prepare
- cp $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage
+ cp $(LINUX_DIR)/arch/*86/boot/bzImage $(KDIR)/bzImage
$(call Image/Prepare/bootscript)
endef
\ Boot script
" u:\boot\vmlinuz" to boot-device
-" block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock1 rootfstype=squashfs init=/etc/preinit rootdelay=5 noinitrd console=tty0 quiet" to boot-file
+" block2mtd.block2mtd=/dev/sda2,65536,rootfs root=/dev/mtdblock1 rootfstype=squashfs init=/etc/preinit noinitrd console=tty0" to boot-file
boot
--- /dev/null
+diff -purN linux_2.6.24_org/arch/x86/Kconfig linux_2.6.24_olpc/arch/x86/Kconfig
+--- linux_2.6.24_org/arch/x86/Kconfig 2008-02-15 20:11:57.000000000 +0000
++++ linux_2.6.24_olpc/arch/x86/Kconfig 2008-02-15 18:59:21.000000000 +0000
+@@ -1415,6 +1415,9 @@ config PCI_GODIRECT
+ config PCI_GOANY
+ bool "Any"
+
++config PCI_GOOLPC
++ bool "OLPC"
++
+ endchoice
+
+ config PCI_BIOS
+@@ -1425,7 +1428,7 @@ config PCI_BIOS
+ # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
+ config PCI_DIRECT
+ bool
+- depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
++ depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC) || X86_VISWS)
+ default y
+
+ config PCI_MMCONFIG
+@@ -1442,6 +1445,11 @@ config PCI_MMCONFIG
+ bool "Support mmconfig PCI config space access"
+ depends on X86_64 && PCI && ACPI
+
++config PCI_OLPC
++ bool
++ depends on PCI && PCI_GOOLPC
++ default y
++
+ config DMAR
+ bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+ depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
+@@ -1561,6 +1569,21 @@ config K8_NB
+ def_bool y
+ depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
+
++config OLPC
++ bool "OLPC Support"
++ default n
++ help
++ Add OLPC Support
++
++config OLPC_PM
++ bool "OLPC power management support"
++ default n
++ depends on OLPC
++
++config OPEN_FIRMWARE
++ bool "Support for Open Firmware"
++ default y if OLPC
++
+ source "drivers/pcmcia/Kconfig"
+
+ source "drivers/pci/hotplug/Kconfig"
+diff -purN linux_2.6.24_org/arch/x86/kernel/Makefile_32 linux_2.6.24_olpc/arch/x86/kernel/Makefile_32
+--- linux_2.6.24_org/arch/x86/kernel/Makefile_32 2008-02-15 20:11:58.000000000 +0000
++++ linux_2.6.24_olpc/arch/x86/kernel/Makefile_32 2008-02-15 18:59:25.000000000 +0000
+@@ -49,6 +49,13 @@ obj-y += pcspeaker.o
+
+ obj-$(CONFIG_SCx200) += scx200_32.o
+
++obj-$(CONFIG_OLPC) += olpc.o
++obj-$(CONFIG_OLPC_PM) += olpc-pm.o olpc-wakeup.o
++obj-$(CONFIG_OPEN_FIRMWARE) += ofw.o
++obj-$(PROM_FS) += promfs.o
++
++
++
+ # vsyscall_32.o contains the vsyscall DSO images as __initdata.
+ # We must build both images before we can assemble it.
+ # Note: kbuild does not track this dependency due to usage of .incbin
+diff -purN linux_2.6.24_org/arch/x86/kernel/ofw.c linux_2.6.24_olpc/arch/x86/kernel/ofw.c
+--- linux_2.6.24_org/arch/x86/kernel/ofw.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/ofw.c 2008-02-15 18:59:25.000000000 +0000
+@@ -0,0 +1,100 @@
++/*
++ * ofw.c - Open Firmware client interface for 32-bit systems.
++ * This code is intended to be portable to any 32-bit Open Firmware
++ * implementation with a standard client interface that can be
++ * called when Linux is running.
++ *
++ * Copyright (C) 2007 Mitch Bradley <wmb@firmworks.com>
++ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
++ */
++
++#include <stdarg.h>
++#include <linux/spinlock.h>
++#include <linux/module.h>
++#include <asm/ofw.h>
++
++
++int (*call_firmware)(int *);
++
++static DEFINE_SPINLOCK(prom_lock);
++
++#define MAXARGS 20
++
++/*
++ * The return value from ofw() in all cases is 0 if the attempt to call the
++ * function succeeded, <0 otherwise. That return value is from the
++ * gateway function only. Any results from the called function are returned
++ * via output argument pointers.
++ *
++ * Here are call templates for all the standard OFW client services:
++ *
++ * ofw("test", 1, 1, namestr, &missing);
++ * ofw("peer", 1, 1, phandle, &sibling_phandle);
++ * ofw("child", 1, 1, phandle, &child_phandle);
++ * ofw("parent", 1, 1, phandle, &parent_phandle);
++ * ofw("instance_to_package", 1, 1, ihandle, &phandle);
++ * ofw("getproplen", 2, 1, phandle, namestr, &proplen);
++ * ofw("getprop", 4, 1, phandle, namestr, bufaddr, buflen, &size);
++ * ofw("nextprop", 3, 1, phandle, previousstr, bufaddr, &flag);
++ * ofw("setprop", 4, 1, phandle, namestr, bufaddr, len, &size);
++ * ofw("canon", 3, 1, devspecstr, bufaddr, buflen, &length);
++ * ofw("finddevice", 1, 1, devspecstr, &phandle);
++ * ofw("instance-to-path", 3, 1, ihandle, bufaddr, buflen, &length);
++ * ofw("package-to-path", 3, 1, phandle, bufaddr, buflen, &length);
++ * ofw("call_method", numin, numout, in0, in1, ..., &out0, &out1, ...);
++ * ofw("open", 1, 1, devspecstr, &ihandle);
++ * ofw("close", 1, 0, ihandle);
++ * ofw("read", 3, 1, ihandle, addr, len, &actual);
++ * ofw("write", 3, 1, ihandle, addr, len, &actual);
++ * ofw("seek", 3, 1, ihandle, pos_hi, pos_lo, &status);
++ * ofw("claim", 3, 1, virtaddr, size, align, &baseaddr);
++ * ofw("release", 2, 0, virtaddr, size);
++ * ofw("boot", 1, 0, bootspecstr);
++ * ofw("enter", 0, 0);
++ * ofw("exit", 0, 0);
++ * ofw("chain", 5, 0, virtaddr, size, entryaddr, argsaddr, len);
++ * ofw("interpret", numin+1, numout+1, cmdstr, in0, ..., &catchres, &out0, ...);
++ * ofw("set-callback", 1, 1, newfuncaddr, &oldfuncaddr);
++ * ofw("set-symbol-lookup", 2, 0, symtovaladdr, valtosymaddr);
++ * ofw("milliseconds", 0, 1, &ms);
++ */
++
++int ofw(char *name, int numargs, int numres, ...)
++{
++ va_list ap;
++ int argarray[MAXARGS+3];
++ int argnum = 3;
++ int retval;
++ int *intp;
++ unsigned long flags;
++
++ if (!call_firmware)
++ return -1;
++ if ((numargs + numres) > MAXARGS)
++ return -1; /* spit out an error? */
++
++ argarray[0] = (int) name;
++ argarray[1] = numargs;
++ argarray[2] = numres;
++
++ va_start(ap, numres);
++ while (numargs) {
++ argarray[argnum++] = va_arg(ap, int);
++ numargs--;
++ }
++
++ spin_lock_irqsave(&prom_lock, flags);
++ retval = call_firmware(argarray);
++ spin_unlock_irqrestore(&prom_lock, flags);
++
++ if (retval == 0) {
++ while (numres) {
++ intp = va_arg(ap, int *);
++ *intp = argarray[argnum++];
++ numres--;
++ }
++ }
++ va_end(ap);
++ return retval;
++}
++EXPORT_SYMBOL(ofw);
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc.c linux_2.6.24_olpc/arch/x86/kernel/olpc.c
+--- linux_2.6.24_org/arch/x86/kernel/olpc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc.c 2008-02-15 18:59:25.000000000 +0000
+@@ -0,0 +1,287 @@
++/* Support for the OLPC DCON and OLPC EC access
++ * Copyright (C) 2006, Advanced Micro Devices, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/autoconf.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/mc146818rtc.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++
++#include <asm/olpc.h>
++#include <asm/ofw.h>
++
++/* This is our new multi-purpose structure used to contain the
++ * information about the platform that we detect
++ */
++
++struct olpc_platform_t olpc_platform_info;
++EXPORT_SYMBOL_GPL(olpc_platform_info);
++
++/*********************************************************************
++ * EC locking and access
++ *********************************************************************/
++
++static DEFINE_SPINLOCK(ec_lock);
++
++/* what the timeout *should* be (in ms) */
++#define EC_BASE_TIMEOUT 20
++
++/* the timeout that bugs in the EC might force us to actually use */
++static int ec_timeout = EC_BASE_TIMEOUT;
++
++static int __init olpc_ec_timeout_set(char *str)
++{
++ if (get_option(&str, &ec_timeout) != 1) {
++ ec_timeout = EC_BASE_TIMEOUT;
++ printk(KERN_ERR "olpc-ec: invalid argument to "
++ "'olpc_ec_timeout=', ignoring!\n");
++ }
++ printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
++ ec_timeout);
++ return 1;
++}
++__setup("olpc_ec_timeout=", olpc_ec_timeout_set);
++
++/*
++ * These *bf_status functions return whether the buffers are full or not.
++ */
++
++static inline unsigned int ibf_status(unsigned int port)
++{
++ return !!(inb(port) & 0x02);
++}
++
++static inline unsigned int obf_status(unsigned int port)
++{
++ return inb(port) & 0x01;
++}
++
++#define wait_on_ibf(p, d) __wait_on_ibf(__LINE__, (p), (d))
++static int __wait_on_ibf(unsigned int line, unsigned int port, int desired)
++{
++ unsigned int timeo;
++ int state = ibf_status(port);
++
++ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
++ mdelay(1);
++ state = ibf_status(port);
++ }
++
++ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
++ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
++ printk(KERN_WARNING "olpc-ec: %d: waited %u ms for IBF!\n",
++ line, ec_timeout - timeo);
++ }
++
++ return !(state == desired);
++}
++
++#define wait_on_obf(p, d) __wait_on_obf(__LINE__, (p), (d))
++static int __wait_on_obf(unsigned int line, unsigned int port, int desired)
++{
++ unsigned int timeo;
++ int state = obf_status(port);
++
++ for (timeo = ec_timeout; state != desired && timeo; timeo--) {
++ mdelay(1);
++ state = obf_status(port);
++ }
++
++ if ((state == desired) && (ec_timeout > EC_BASE_TIMEOUT) &&
++ timeo < (ec_timeout - EC_BASE_TIMEOUT)) {
++ printk(KERN_WARNING "olpc-ec: %d: waited %u ms for OBF!\n",
++ line, ec_timeout - timeo);
++ }
++
++ return !(state == desired);
++}
++
++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
++ unsigned char *outbuf, size_t outlen)
++{
++ unsigned long flags;
++ int ret = -EIO;
++ int i;
++
++ spin_lock_irqsave(&ec_lock, flags);
++
++ /* Clear OBF */
++ for (i = 0; i < 10 && (obf_status(0x6c) == 1); i++)
++ inb(0x68);
++ if (i == 10) {
++ printk(KERN_ERR "olpc-ec: timeout while attempting to "
++ "clear OBF flag!\n");
++ goto err;
++ }
++
++ if (wait_on_ibf(0x6c, 0)) {
++ printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
++ "quiesce!\n");
++ goto err;
++ }
++
++restart:
++ /*
++ * Note that if we time out during any IBF checks, that's a failure;
++ * we have to return. There's no way for the kernel to clear that.
++ *
++ * If we time out during an OBF check, we can restart the command;
++ * reissuing it will clear the OBF flag, and we should be alright.
++ * The OBF flag will sometimes misbehave due to what we believe
++ * is a hardware quirk..
++ */
++ printk(KERN_DEBUG "olpc-ec: running cmd 0x%x\n", cmd);
++ outb(cmd, 0x6c);
++
++ if (wait_on_ibf(0x6c, 0)) {
++ printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
++ "command!\n");
++ goto err;
++ }
++
++ if (inbuf && inlen) {
++ /* write data to EC */
++ for (i = 0; i < inlen; i++) {
++ if (wait_on_ibf(0x6c, 0)) {
++ printk(KERN_ERR "olpc-ec: timeout waiting for"
++ " EC accept data!\n");
++ goto err;
++ }
++ printk(KERN_DEBUG "olpc-ec: sending cmd arg 0x%x\n",
++ inbuf[i]);
++ outb(inbuf[i], 0x68);
++ }
++ }
++ if (outbuf && outlen) {
++ /* read data from EC */
++ for (i = 0; i < outlen; i++) {
++ if (wait_on_obf(0x6c, 1)) {
++ printk(KERN_ERR "olpc-ec: timeout waiting for"
++ " EC to provide data!\n");
++ goto restart;
++ }
++ outbuf[i] = inb(0x68);
++ printk(KERN_DEBUG "olpc-ec: received 0x%x\n",
++ outbuf[i]);
++ }
++ }
++
++ ret = 0;
++err:
++ spin_unlock_irqrestore(&ec_lock, flags);
++ return ret;
++}
++EXPORT_SYMBOL_GPL(olpc_ec_cmd);
++
++/*********************************************************************
++ * DCON stuff
++ *********************************************************************/
++
++static void __init
++ec_detect(void)
++{
++ olpc_ec_cmd(0x08, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1);
++}
++
++/* Check to see if this version of the OLPC board has VSA built
++ * in, and set a flag
++ */
++
++static void __init vsa_detect(void)
++{
++ u16 rev;
++
++ outw(0xFC53, 0xAC1C);
++ outw(0x0003, 0xAC1C);
++
++ rev = inw(0xAC1E);
++
++ if (rev == 0x4132)
++ olpc_platform_info.flags |= OLPC_F_VSA;
++}
++
++static void __init platform_detect(void)
++{
++ size_t propsize;
++ u32 rev;
++
++ if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4,
++ &propsize) || propsize != 4) {
++ printk(KERN_ERR "ofw: getprop call failed!\n");
++ rev = 0;
++ }
++ olpc_platform_info.boardrev = be32_to_cpu(rev);
++}
++
++static int olpc_dcon_present = -1;
++module_param(olpc_dcon_present, int, 0444);
++
++/* REV_A CMOS map:
++ * bit 440; DCON present bit
++ */
++
++#define OLPC_CMOS_DCON_OFFSET (440 / 8)
++#define OLPC_CMOS_DCON_MASK 0x01
++
++static int __init olpc_init(void)
++{
++ unsigned char *romsig;
++
++ spin_lock_init(&ec_lock);
++
++ romsig = ioremap(0xffffffc0, 16);
++
++ if (!romsig)
++ return 0;
++
++ if (strncmp(romsig, "CL1 Q", 7))
++ goto unmap;
++ if (strncmp(romsig+6, romsig+13, 3)) {
++ printk(KERN_INFO "OLPC BIOS signature looks invalid. Assuming not OLPC\n");
++ goto unmap;
++ }
++ printk(KERN_INFO "OLPC board with OpenFirmware: %.16s\n", romsig);
++
++ olpc_platform_info.flags |= OLPC_F_PRESENT;
++
++ /* Get the platform revision */
++ platform_detect();
++
++ /* If olpc_dcon_present isn't set by the command line, then
++ * "detect" it
++ */
++
++ if (olpc_dcon_present == -1) {
++ /* B1 and greater always has a DCON */
++ if (olpc_board_at_least(olpc_board(0xb1)))
++ olpc_dcon_present = 1;
++ }
++
++ if (olpc_dcon_present)
++ olpc_platform_info.flags |= OLPC_F_DCON;
++
++ /* Get the EC revision */
++ ec_detect();
++
++ /* Check to see if the VSA exists */
++ vsa_detect();
++
++ printk(KERN_INFO "OLPC board revision: %s%X (EC=%x)\n",
++ ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
++ olpc_platform_info.boardrev >> 4,
++ olpc_platform_info.ecver);
++
++ unmap:
++ iounmap(romsig);
++
++ return 0;
++}
++
++postcore_initcall(olpc_init);
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-pm.c linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c
+--- linux_2.6.24_org/arch/x86/kernel/olpc-pm.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-pm.c 2008-02-15 18:59:26.000000000 +0000
+@@ -0,0 +1,946 @@
++/* olpc-pm.c
++ * © 2006 Red Hat, Inc.
++ * Portions also copyright 2006 Advanced Micro Devices, Inc.
++ * GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/input.h>
++#include <linux/suspend.h>
++#include <linux/bootmem.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/mc146818rtc.h>
++#include <asm/io.h>
++
++#include <asm/olpc.h>
++
++/* A few words about accessing the ACPI and PM registers. Long story short,
++ byte and word accesses of the ACPI and PM registers is broken. The only
++ way to do it really correctly is to use dword accesses, which we do
++ throughout this code. For more details, please consult Eratta 17 and 18
++ here:
++
++ http://www.amd.com/files/connectivitysolutions/geode/geode_gx/34472D_CS5536_B1_specupdate.pdf
++*/
++
++#define PM_IRQ 3
++
++#define CS5536_PM_PWRBTN (1 << 8)
++#define CS5536_PM_RTC (1 << 10)
++#define CS5536_PM_WAK (1 << 15)
++
++#define GPIO_WAKEUP_EC (1 << 31)
++#define GPIO_WAKEUP_LID (1 << 30)
++
++#define PM_MODE_NORMAL 0
++#define PM_MODE_TEST 1
++#define PM_MODE_MAX 2
++
++/* These, and the battery EC commands, should be in an olpc.h. */
++#define EC_WRITE_SCI_MASK 0x1b
++#define EC_READ_SCI_MASK 0x1c
++
++extern void do_olpc_suspend_lowlevel(void);
++
++static struct {
++ unsigned long address;
++ unsigned short segment;
++} ofw_bios_entry = { 0, __KERNEL_CS };
++
++static int olpc_pm_mode = PM_MODE_NORMAL;
++static unsigned long acpi_base;
++static unsigned long pms_base;
++static int sci_irq;
++static int olpc_lid_flag;
++
++static struct input_dev *pm_inputdev;
++static struct input_dev *lid_inputdev;
++static struct input_dev *ebook_inputdev;
++static struct platform_suspend_ops olpc_pm_ops;
++
++static int gpio_wake_events = 0;
++static int ebook_state = -1;
++static u16 olpc_wakeup_mask = 0;
++
++static unsigned int test_timeout = 0;
++static char *wackup_source = "none";
++
++struct platform_device olpc_powerbutton_dev = {
++ .name = "powerbutton",
++ .id = -1,
++};
++
++struct platform_device olpc_lid_dev = {
++ .name = "lid",
++ .id = -1,
++};
++
++static void __init init_ebook_state(void)
++{
++ if (olpc_ec_cmd(0x2a, NULL, 0, (unsigned char *) &ebook_state, 1)) {
++ printk(KERN_WARNING "olpc-pm: failed to get EBOOK state!\n");
++ ebook_state = 0;
++ }
++ ebook_state &= 1;
++
++ /* the input layer needs to know what value to default to as well */
++ input_report_switch(ebook_inputdev, SW_TABLET_MODE, ebook_state);
++ input_sync(ebook_inputdev);
++}
++
++static void (*battery_callback)(unsigned long);
++static DEFINE_SPINLOCK(battery_callback_lock);
++
++/* propagate_events is non-NULL if run from workqueue,
++ NULL when called at init time to flush SCI queue */
++static void process_sci_queue(struct work_struct *propagate_events)
++{
++ unsigned char data = 0;
++ unsigned char battery_events = 0;
++ int ret;
++
++ do {
++ ret = olpc_ec_cmd(0x84, NULL, 0, &data, 1);
++ if (!ret) {
++ printk(KERN_DEBUG "olpc-pm: SCI 0x%x received\n",
++ data);
++
++ if (wackup_source && !strcmp(wackup_source, "sci")) {
++ /*
++ * XXX: in order for this to not be racy, we
++ * need assurance that we will never get
++ * preempted by olpc_do_sleep here!
++ */
++ switch (data) {
++ case EC_SCI_SRC_EMPTY:
++ wackup_source = "empty sci";
++ break;
++ case EC_SCI_SRC_GAME:
++ wackup_source = "key press";
++ break;
++ case EC_SCI_SRC_BATTERY:
++ wackup_source = "battery";
++ break;
++ case EC_SCI_SRC_BATSOC:
++ wackup_source = "battery state change";
++ break;
++ case EC_SCI_SRC_BATERR:
++ wackup_source = "battery error";
++ break;
++ case EC_SCI_SRC_EBOOK:
++ wackup_source = "ebook";
++ break;
++ case EC_SCI_SRC_WLAN:
++ wackup_source = "wlan packet";
++ break;
++ case EC_SCI_SRC_ACPWR:
++ wackup_source = "ac power";
++ break;
++ default:
++ wackup_source = "unknown";
++ }
++ }
++
++ if (data & (EC_SCI_SRC_BATERR | EC_SCI_SRC_BATSOC |
++ EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR))
++ battery_events |= data;
++ else if (data == EC_SCI_SRC_EBOOK) {
++ ebook_state = !ebook_state;
++ if (propagate_events) {
++ input_report_switch(ebook_inputdev,
++ SW_TABLET_MODE, ebook_state);
++ input_sync(ebook_inputdev);
++ }
++ }
++ }
++ } while (data && !ret);
++
++ if (battery_events && battery_callback && propagate_events) {
++ void (*cbk)(unsigned long);
++
++ /* Older EC versions didn't distinguish between AC and battery
++ events */
++ if (olpc_platform_info.ecver < 0x51)
++ battery_events = EC_SCI_SRC_BATTERY | EC_SCI_SRC_ACPWR;
++
++ spin_lock(&battery_callback_lock);
++ cbk = battery_callback;
++ spin_unlock(&battery_callback_lock);
++
++ cbk(battery_events);
++ }
++
++ if (ret)
++ printk(KERN_WARNING "Failed to clear SCI queue!\n");
++}
++
++static DECLARE_WORK(sci_work, process_sci_queue);
++
++void olpc_register_battery_callback(void (*f)(unsigned long))
++{
++ spin_lock(&battery_callback_lock);
++ battery_callback = f;
++ spin_unlock(&battery_callback_lock);
++}
++EXPORT_SYMBOL_GPL(olpc_register_battery_callback);
++
++void olpc_deregister_battery_callback(void)
++{
++ spin_lock(&battery_callback_lock);
++ battery_callback = NULL;
++ spin_unlock(&battery_callback_lock);
++ cancel_work_sync(&sci_work);
++}
++EXPORT_SYMBOL_GPL(olpc_deregister_battery_callback);
++
++
++static int olpc_pm_interrupt(int irq, void *id)
++{
++ uint32_t sts, gpe = 0;
++
++ sts = inl(acpi_base + PM1_STS);
++ outl(sts | 0xFFFF, acpi_base + PM1_STS);
++
++ if (olpc_board_at_least(olpc_board(0xb2))) {
++ gpe = inl(acpi_base + PM_GPE0_STS);
++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
++ }
++
++ if (sts & CS5536_PM_PWRBTN) {
++ if (!wackup_source)
++ wackup_source = "power button";
++ printk(KERN_DEBUG "olpm-pm: PM_PWRBTN %sevent received\n",
++ sts & CS5536_PM_WAK ? "wakeup " : "");
++ if (!(sts & CS5536_PM_WAK)) {
++ input_report_key(pm_inputdev, KEY_POWER, 1);
++ input_sync(pm_inputdev);
++ /* Do we need to delay this? */
++ input_report_key(pm_inputdev, KEY_POWER, 0);
++ input_sync(pm_inputdev);
++ }
++ }
++
++ if (gpe & GPIO_WAKEUP_EC) {
++ geode_gpio_clear(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
++ if (!wackup_source)
++ wackup_source = "sci";
++ schedule_work(&sci_work);
++ }
++
++ if (gpe & GPIO_WAKEUP_LID) {
++ /* Disable events */
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++
++ /* Clear the edge */
++
++ if (olpc_lid_flag)
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++ else
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++ /* Clear the status too */
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
++
++ /* The line is high when the LID is open, but SW_LID
++ * should be high when the LID is closed, so we pass the old
++ * value of olpc_lid_flag
++ */
++
++ input_report_switch(lid_inputdev, SW_LID, olpc_lid_flag);
++ input_sync(lid_inputdev);
++ if (!wackup_source)
++ wackup_source = "lid";
++
++ /* Swap the status */
++ olpc_lid_flag = !olpc_lid_flag;
++
++ if (olpc_lid_flag)
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++ else
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++ /* re-enable the event */
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++ }
++
++ return IRQ_HANDLED;
++}
++
++int olpc_ec_mask_set(u8 bits)
++{
++ int ret;
++ u8 byte;
++
++ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &byte, 1);
++ if (ret) {
++ printk(KERN_ERR "olpc-pm: error getting SCI mask: %d\n", ret);
++ return ret;
++ }
++ /* the high bit is unused, if it is ever unset, that is a good sign
++ sign of EC communication corruption! */
++ WARN_ON(!(byte & 0x80));
++
++ byte |= bits;
++ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &byte, 1, NULL, 0);
++ if (ret)
++ printk(KERN_ERR "olpc-pm: error setting SCI mask: %d\n", ret);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(olpc_ec_mask_set);
++
++int olpc_ec_mask_unset(u8 bits)
++{
++ int ret;
++ u8 byte;
++
++ ret = olpc_ec_cmd(EC_READ_SCI_MASK, NULL, 0, &byte, 1);
++ if (ret) {
++ printk(KERN_ERR "olpc-pm: error getting SCI mask: %d\n", ret);
++ return ret;
++ }
++ /* the high bit is unused, if it is ever unset, that is a good sign
++ sign of EC communication corruption! */
++ WARN_ON(!(byte & 0x80));
++
++ byte &= ~bits;
++ ret = olpc_ec_cmd(EC_WRITE_SCI_MASK, &byte, 1, NULL, 0);
++ if (ret)
++ printk(KERN_ERR "olpc-pm: error setting SCI mask: %d\n", ret);
++
++ return ret;
++}
++EXPORT_SYMBOL_GPL(olpc_ec_mask_unset);
++
++/*
++ * For now, only support STR. We also don't support suspending on
++ * B1s, due to difficulties with the cafe FPGA.
++ */
++static int olpc_pm_state_valid(suspend_state_t pm_state)
++{
++ if (pm_state == PM_SUSPEND_MEM && olpc_board_at_least(olpc_board(0xb2)))
++ return 1;
++
++ return 0;
++}
++
++/* This is a catchall function for operations that just don't belong
++ * anywhere else. Later we will evaluate if these belong in the
++ * individual device drivers or the firmware.
++ * If you add something to this function, please explain yourself with
++ * a comment.
++ */
++
++extern void gxfb_flatpanel_control(int state);
++
++static u32 gpio_wakeup[2];
++static u64 irq_sources[4];
++static u64 mfgpt_irq_msr, mfgpt_nr_msr;
++
++void olpc_fixup_wakeup(void)
++{
++ u32 base = geode_gpio_base();
++ int i;
++
++ /* Enable the flatpanel sequencing as early as possible, because
++ it takes ~64ms to resume. This probably belongs in the firmware */
++
++ //gxfb_flatpanel_control(1);
++
++ /* Tell the EC to stop inhibiting SCIs */
++ olpc_ec_cmd(0x34, NULL, 0, NULL, 0);
++
++ /* Restore the interrupt sources */
++ wrmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
++ wrmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
++ wrmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
++ wrmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
++
++ /* Restore the X and Y sources for GPIO */
++ outl(gpio_wakeup[0], base + GPIO_MAP_X);
++ outl(gpio_wakeup[1], base + GPIO_MAP_Y);
++
++ /* Resture the MFGPT MSRs */
++ wrmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
++ wrmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
++
++ for (i=0;i<2;i++) {
++ /* tell the wireless module to restart USB communication */
++ olpc_ec_cmd(0x24, NULL, 0, NULL, 0);
++ }
++
++ /* Turn all events on */
++ olpc_ec_mask_set(EC_SCI_SRC_ALL);
++}
++
++void olpc_fixup_sleep(void)
++{
++ u32 base = geode_gpio_base();
++ int i;
++
++ /* Save the X and Y sources for GPIO */
++ gpio_wakeup[0] = inl(base + GPIO_MAP_X);
++ gpio_wakeup[1] = inl(base + GPIO_MAP_Y);
++
++ /* Save the Y and Z unrestricted sources */
++
++ rdmsrl(MSR_PIC_YSEL_LOW, irq_sources[0]);
++ rdmsrl(MSR_PIC_ZSEL_LOW, irq_sources[1]);
++ rdmsrl(MSR_PIC_YSEL_HIGH, irq_sources[2]);
++ rdmsrl(MSR_PIC_ZSEL_HIGH, irq_sources[3]);
++
++ /* Turn off the MFGPT timers on the way down */
++
++ for(i = 0; i < 8; i++) {
++ u32 val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
++
++ if (val & MFGPT_SETUP_SETUP) {
++ val &= ~MFGPT_SETUP_CNTEN;
++ geode_mfgpt_write(i, MFGPT_REG_SETUP, val);
++ }
++ }
++
++ /* Save the MFGPT MSRs */
++ rdmsrl(MFGPT_IRQ_MSR, mfgpt_irq_msr);
++ rdmsrl(MFGPT_NR_MSR, mfgpt_nr_msr);
++
++ if (device_may_wakeup(&olpc_powerbutton_dev.dev))
++ olpc_wakeup_mask |= CS5536_PM_PWRBTN;
++ else
++ olpc_wakeup_mask &= ~(CS5536_PM_PWRBTN);
++
++ if (device_may_wakeup(&olpc_lid_dev.dev)) {
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++ gpio_wake_events |= GPIO_WAKEUP_LID;
++ } else {
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++ gpio_wake_events &= ~(GPIO_WAKEUP_LID);
++ }
++
++ /* We don't want to wake up on superfluous events */
++ olpc_ec_mask_unset(EC_SCI_SRC_BATSOC | EC_SCI_SRC_ACPWR);
++
++ /*
++ * Cmd 0x32 tells the EC that we're going into suspend; this was
++ * added to work around hardware races related to SCI events. This
++ * should cause the EC to inhibit further SCIs while MAIN_ON is
++ * transitioning low.
++ *
++ * There's also some sort of EC race whereby the EC gets its
++ * IBF/OBF flags confused and all future communication (after
++ * resuming) fails if we suspend too soon after updating
++ * the EC SCI mask. Having this command after updating the
++ * SCI mask allows the EC enough time to finish doing what it's
++ * doing.
++ */
++ olpc_ec_cmd(0x32, NULL, 0, NULL, 0);
++}
++
++static int olpc_pm_enter(suspend_state_t pm_state)
++{
++ /* Only STR is supported */
++ if (pm_state != PM_SUSPEND_MEM)
++ return -EINVAL;
++
++ olpc_fixup_sleep();
++
++ /* Set the GPIO wakeup bits */
++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
++
++ /* Save CPU state */
++ do_olpc_suspend_lowlevel();
++
++ olpc_fixup_wakeup();
++
++ /* Restore the SCI wakeup events */
++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
++
++ return 0;
++}
++
++int asmlinkage olpc_do_sleep(u8 sleep_state)
++{
++ void *pgd_addr = __va(read_cr3());
++ printk(KERN_ERR "olpc_do_sleep!\n"); /* this needs to remain here so
++ * that gcc doesn't optimize
++ * away our __va! */
++ /* FIXME: Set the SCI bits we want to wake up on here */
++
++ /* FIXME: Set any other SCI events that we might want here */
++
++ outl((olpc_wakeup_mask << 16) | 0xFFFF, acpi_base + PM1_STS);
++
++ wackup_source = NULL;
++
++ /* If we are in test mode, then just return (simulate a successful
++ suspend/resume). Otherwise, if we are doing the real thing,
++ then go for the gusto */
++
++ if (olpc_pm_mode != PM_MODE_TEST) {
++ __asm__ __volatile__("movl %0,%%eax" : : "r" (pgd_addr));
++ __asm__("call *(%%edi); cld"
++ : : "D" (&ofw_bios_entry));
++ __asm__ __volatile__("movb $0x34, %al\n\t"
++ "outb %al, $0x70\n\t"
++ "movb $0x30, %al\n\t"
++ "outb %al, $0x71\n\t");
++
++ }
++ else if (test_timeout > 0) {
++ int t;
++
++ /* Delay N seconds for testing purposes */
++
++ for(t = 0; t < test_timeout; t++)
++ mdelay(1000);
++ }
++
++ return 0;
++}
++
++static void olpc_power_off(void)
++{
++ printk(KERN_INFO "OLPC power off sequence...\n");
++
++ /* Enable all of these controls with 0 delay */
++ outl(0x40000000, pms_base + PM_SCLK);
++ outl(0x40000000, pms_base + PM_IN_SLPCTL);
++ outl(0x40000000, pms_base + PM_WKXD);
++ outl(0x40000000, pms_base + PM_WKD);
++
++ /* Clear status bits (possibly unnecessary) */
++ outl(0x0002ffff, pms_base + PM_SSC);
++ outl(0xffffffff, acpi_base + PM_GPE0_STS);
++
++ /* Write SLP_EN bit to start the machinery */
++ outl(0x00002000, acpi_base + PM1_CNT);
++}
++
++/* This code will slowly disappear as we fixup the issues in the BIOS */
++
++static void __init olpc_fixup_bios(void)
++{
++ unsigned long hi, lo;
++
++ if (olpc_has_vsa()) {
++ /* The VSA aggressively sets up the ACPI and PM register for
++ * trapping - its not enough to force these values in the BIOS -
++ * they seem to be changed during PCI init as well.
++ */
++
++ /* Change the PM registers to decode to the DD */
++
++ rdmsr(0x510100e2, lo, hi);
++ hi |= 0x80000000;
++ wrmsr(0x510100e2, lo, hi);
++
++ /* Change the ACPI registers to decode to the DD */
++
++ rdmsr(0x510100e3, lo, hi);
++ hi |= 0x80000000;
++ wrmsr(0x510100e3, lo, hi);
++ }
++
++ /* GPIO24 controls WORK_AUX */
++
++ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_ENABLE);
++ geode_gpio_set(OLPC_GPIO_WORKAUX, GPIO_OUTPUT_AUX1);
++
++ if (olpc_board_at_least(olpc_board(0xb2))) {
++ /* GPIO10 is connected to the thermal alarm */
++ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_ENABLE);
++ geode_gpio_set(OLPC_GPIO_THRM_ALRM, GPIO_INPUT_AUX1);
++
++ /* Set up to get LID events */
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_ENABLE);
++
++ /* Clear edge detection and event enable for now */
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++ geode_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS);
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS);
++
++ /* Set the LID to cause an PME event on group 6 */
++ geode_gpio_event_pme(OLPC_GPIO_LID, 6);
++
++ /* Set PME group 6 to fire the SCI interrupt */
++ geode_gpio_set_irq(6, sci_irq);
++ }
++
++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_INPUT_ENABLE);
++
++ /* Clear pending events */
++
++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS);
++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS);
++
++ //geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_EN);
++ geode_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE);
++
++ /* Set the SCI to cause a PME event on group 7 */
++ geode_gpio_event_pme(OLPC_GPIO_ECSCI, 7);
++
++ /* And have group 6 also fire the SCI interrupt */
++ geode_gpio_set_irq(7, sci_irq);
++}
++
++/* This provides a control file for setting up testing of the
++ power management system. For now, there is just one setting:
++ "test" which means that we don't actually enter the power
++ off routine.
++*/
++
++static const char * const pm_states[] = {
++ [PM_MODE_NORMAL] = "normal",
++ [PM_MODE_TEST] = "test",
++};
++
++extern struct mutex pm_mutex;
++extern struct kset power_subsys;
++
++static ssize_t control_show(struct kset *s, char *buf)
++{
++ return sprintf(buf, "%s\n", pm_states[olpc_pm_mode]);
++}
++
++static ssize_t control_store(struct kset *s, const char *buf, size_t n)
++{
++ int i, len;
++ char *p;
++
++ p = memchr(buf, '\n', n);
++ len = p ? p - buf : n;
++
++ /* Grab the mutex */
++ mutex_lock(&pm_mutex);
++
++ for(i = 0; i < PM_MODE_MAX; i++) {
++ if (!strncmp(buf, pm_states[i], len)) {
++ olpc_pm_mode = i;
++ break;
++ }
++ }
++
++ mutex_unlock(&pm_mutex);
++
++ return (i == PM_MODE_MAX) ? -EINVAL : n;
++}
++
++static ssize_t timeout_show(struct kset *s, char *buf)
++{
++ return sprintf(buf, "%d\n", test_timeout);
++}
++
++static ssize_t timeout_store(struct kset *s, const char *buf, size_t n)
++{
++ unsigned int t = simple_strtoul(buf, NULL, 0);
++ test_timeout = t;
++
++ return n;
++}
++
++static ssize_t wackup_show(struct kset *s, char *buf)
++{
++ return sprintf(buf, "%s\n", wackup_source ? wackup_source : "none");
++}
++
++static struct subsys_attribute control_attr = {
++ .attr = {
++ .name = "olpc-pm",
++ .mode = 0644,
++ },
++ .show = control_show,
++ .store = control_store,
++};
++
++static struct subsys_attribute test_attr = {
++ .attr = {
++ .name = "test-timeout",
++ .mode = 0644,
++ },
++ .show = timeout_show,
++ .store = timeout_store,
++};
++
++static struct subsys_attribute wackup_attr = {
++ .attr = {
++ .name = "wakeup-source",
++ .mode = 0400,
++ },
++ .show = wackup_show,
++};
++
++static struct attribute * olpc_attributes[] = {
++ &control_attr.attr,
++ &test_attr.attr,
++ &wackup_attr.attr,
++ NULL
++};
++
++static struct attribute_group olpc_attrs = {
++ .attrs = olpc_attributes,
++};
++
++static int __init alloc_inputdevs(void)
++{
++ int ret = -ENOMEM;
++
++ pm_inputdev = input_allocate_device();
++ if (!pm_inputdev)
++ goto err;
++
++ pm_inputdev->name = "OLPC PM";
++ pm_inputdev->phys = "olpc_pm/input0";
++ set_bit(EV_KEY, pm_inputdev->evbit);
++ set_bit(KEY_POWER, pm_inputdev->keybit);
++
++ ret = input_register_device(pm_inputdev);
++ if (ret) {
++ printk(KERN_ERR "olpc-pm: failed to register PM input device: %d\n", ret);
++ goto err;
++ }
++
++ lid_inputdev = input_allocate_device();
++ if (!lid_inputdev)
++ goto err;
++
++ lid_inputdev->name = "OLPC lid switch";
++ lid_inputdev->phys = "olpc_pm/input1";
++ set_bit(EV_SW, lid_inputdev->evbit);
++ set_bit(SW_LID, lid_inputdev->swbit);
++
++ ret = input_register_device(lid_inputdev);
++ if (ret) {
++ printk(KERN_ERR "olpc-pm: failed to register lid input device: %d\n", ret);
++ goto err;
++ }
++
++ ebook_inputdev = input_allocate_device();
++ if (!ebook_inputdev)
++ goto err;
++
++ ebook_inputdev->name = "OLPC ebook switch";
++ ebook_inputdev->phys = "olpc_pm/input2";
++ set_bit(EV_SW, ebook_inputdev->evbit);
++ set_bit(SW_TABLET_MODE, ebook_inputdev->swbit);
++
++ ret = input_register_device(ebook_inputdev);
++ if (ret) {
++ printk(KERN_ERR "olpc-pm: failed to register ebook input device: %d\n", ret);
++ goto err;
++ }
++
++ return ret;
++err:
++ if (ebook_inputdev) {
++ input_unregister_device(ebook_inputdev);
++ ebook_inputdev = NULL;
++ }
++ if (lid_inputdev) {
++ input_unregister_device(lid_inputdev);
++ lid_inputdev = NULL;
++ }
++ if (pm_inputdev) {
++ input_unregister_device(pm_inputdev);
++ pm_inputdev = NULL;
++ }
++
++ return ret;
++}
++
++static int __init olpc_pm_init(void)
++{
++ uint32_t lo, hi;
++ int ret;
++
++ if (!machine_is_olpc())
++ return -ENODEV;
++
++ acpi_base = geode_acpi_base();
++ pms_base = geode_pms_base();
++
++ if (!acpi_base || !pms_base)
++ return -ENODEV;
++
++ pm_power_off = olpc_power_off;
++
++ ret = alloc_inputdevs();
++ if (ret)
++ return ret;
++
++ rdmsr(0x51400020, lo, hi);
++ sci_irq = (lo >> 20) & 15;
++
++ if (sci_irq) {
++ printk(KERN_INFO "SCI is mapped to IRQ %d\n", sci_irq);
++ } else {
++ /* Zero doesn't mean zero -- it means masked */
++ printk(KERN_INFO "SCI unmapped. Mapping to IRQ 3\n");
++ sci_irq = 3;
++ lo |= 0x00300000;
++ wrmsrl(0x51400020, lo);
++ }
++
++ olpc_fixup_bios();
++
++ lo = inl(pms_base + PM_FSD);
++
++ /* Lock, enable failsafe, 4 seconds */
++ outl(0xc001f400, pms_base + PM_FSD);
++
++ /* Here we set up the SCI events we're interested in during
++ * real-time. We have no sleep button, and the RTC doesn't make
++ * sense, so set up the power button
++ */
++
++ outl(inl(acpi_base) | ((CS5536_PM_PWRBTN) << 16), acpi_base);
++
++ if (olpc_board_at_least(olpc_board(0xb2))) {
++ gpio_wake_events |= GPIO_WAKEUP_LID;
++
++ /* Get the current value of the GPIO, and set up the edges */
++ olpc_lid_flag = geode_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK);
++
++ /* Watch for the opposite edge */
++
++ if (olpc_lid_flag)
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN);
++ else
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN);
++
++ /* Enable the event */
++ geode_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE);
++ }
++
++ /* Set up the EC SCI */
++
++ gpio_wake_events |= GPIO_WAKEUP_EC;
++
++ outl(gpio_wake_events, acpi_base + PM_GPE0_EN);
++ outl(0xFFFFFFFF, acpi_base + PM_GPE0_STS);
++
++ /* Select level triggered in PIC */
++
++ if (sci_irq < 8) {
++ lo = inb(0x4d0);
++ lo |= 1 << sci_irq;
++ outb(lo, 0x4d0);
++ } else {
++ lo = inb(0x4d1);
++ lo |= 1 << (sci_irq - 8);
++ outb(lo, 0x4d1);
++ }
++ /* Clear pending interrupt */
++ outl(inl(acpi_base) | 0xFFFF, acpi_base);
++ process_sci_queue(0); /* we just want to flush the queue here */
++ init_ebook_state();
++
++ /* Enable the interrupt */
++
++ ret = request_irq(sci_irq, &olpc_pm_interrupt, 0, "SCI", &acpi_base);
++
++ if (ret) {
++ printk(KERN_ERR "Error registering SCI: %d\n", ret);
++ return ret;
++ }
++
++ ofw_bios_entry.address = 0xF0000 + PAGE_OFFSET;
++ suspend_set_ops(&olpc_pm_ops);
++
++ sysfs_create_group(&power_subsys.kobj, &olpc_attrs);
++
++ return 0;
++}
++
++
++#if defined (CONFIG_RTC_DRV_CMOS) || defined (CONFIG_RTC_DRV_CMOS_MODULE)
++struct resource rtc_platform_resource[2] = {
++ {
++ .flags = IORESOURCE_IO,
++ .start = RTC_PORT(0),
++ .end = RTC_PORT(0) + RTC_IO_EXTENT
++ },
++ {
++ .flags = IORESOURCE_IRQ,
++ .start = 8,
++ .end = 8,
++ },
++};
++
++
++static void rtc_wake_on(struct device *dev)
++{
++ olpc_wakeup_mask |= CS5536_PM_RTC;
++}
++
++static void rtc_wake_off(struct device *dev)
++{
++ olpc_wakeup_mask &= ~(CS5536_PM_RTC);
++}
++
++static struct cmos_rtc_board_info rtc_info = {
++ .rtc_day_alarm = 0,
++ .rtc_mon_alarm = 0,
++ .rtc_century = 0,
++ .wake_on = rtc_wake_on,
++ .wake_off = rtc_wake_off,
++};
++
++struct platform_device olpc_rtc_device = {
++ .name = "rtc_cmos",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(rtc_platform_resource),
++ .dev.platform_data = &rtc_info,
++ .resource = rtc_platform_resource,
++};
++
++static int __init olpc_platform_init(void)
++{
++ rdmsrl(MSR_RTC_DOMA_OFFSET, rtc_info.rtc_day_alarm);
++ rdmsrl(MSR_RTC_MONA_OFFSET, rtc_info.rtc_mon_alarm);
++ rdmsrl(MSR_RTC_CEN_OFFSET, rtc_info.rtc_century);
++
++ (void)platform_device_register(&olpc_rtc_device);
++ device_init_wakeup(&olpc_rtc_device.dev, 1);
++
++ (void)platform_device_register(&olpc_powerbutton_dev);
++ device_init_wakeup(&olpc_powerbutton_dev.dev, 1);
++
++ (void)platform_device_register(&olpc_lid_dev);
++ device_init_wakeup(&olpc_lid_dev.dev, 1);
++
++ return 0;
++}
++arch_initcall(olpc_platform_init);
++#endif /* CONFIG_RTC_DRV_CMOS */
++
++static void olpc_pm_exit(void)
++{
++ /* Clear any pending events, and disable them */
++ outl(0xFFFF, acpi_base+2);
++
++ free_irq(sci_irq, &acpi_base);
++ input_unregister_device(pm_inputdev);
++ input_unregister_device(lid_inputdev);
++ input_unregister_device(ebook_inputdev);
++}
++
++static struct platform_suspend_ops olpc_pm_ops = {
++ .valid = olpc_pm_state_valid,
++ .enter = olpc_pm_enter,
++};
++
++module_init(olpc_pm_init);
++module_exit(olpc_pm_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
++MODULE_DESCRIPTION("AMD Geode power management for OLPC CL1");
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S
+--- linux_2.6.24_org/arch/x86/kernel/olpc-sleep.S 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-sleep.S 2008-02-15 18:59:26.000000000 +0000
+@@ -0,0 +1,39 @@
++.text
++
++ENTRY(olpc_sleep_asm)
++olpc_sleep:
++ ;; Get the value of PM1_CNT and store it off
++
++ add 08h, ax
++ mov bx,dx
++ in dx,eax
++ or 2000h, ax
++ mov ax,di
++
++ ;; flush the cache
++ wbinvd
++
++ ;; GX2 must disable refresh before going into self-refresh
++ mov 2000000180xh, ecx
++ rdmsr
++ mov eax, esi
++ and 0FF0000FFh, eax
++ wrmsr
++
++ ;; Now, put the memory into self refresh
++ mov 2004, cx
++ xor edx, edx
++ xor eax, eax
++ mov 04h, al
++ wrmsr
++
++ ;; Thats all she wrote - time to go to sleep
++
++ mov bx, dx
++ movzx di, eax
++ out eax, dx
++
++ ;;
++
++
++
+diff -purN linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S
+--- linux_2.6.24_org/arch/x86/kernel/olpc-wakeup.S 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/olpc-wakeup.S 2008-02-15 18:59:25.000000000 +0000
+@@ -0,0 +1,133 @@
++.text
++#include <linux/linkage.h>
++#include <asm/segment.h>
++#include <asm/page.h>
++
++ .macro writepost,value
++ movb $0x34, %al
++ outb %al, $0x70
++ movb $\value, %al
++ outb %al, $0x71
++ .endm
++
++ALIGN
++ .align 4096
++
++wakeup_start:
++# jmp wakeup_start
++
++ cli
++ cld
++
++ # Clear any dangerous flags
++
++ pushl $0
++ popfl
++
++ writepost 0x31
++
++ # Set up %cr3
++ movl $swsusp_pg_dir - __PAGE_OFFSET, %eax
++ movl %eax, %cr3
++
++ movl saved_cr4, %eax
++ movl %eax, %cr4
++
++ movl saved_cr0, %eax
++ movl %eax, %cr0
++
++ jmp 1f
++1:
++ ljmpl $__KERNEL_CS,$wakeup_return
++
++
++.org 0x1000
++
++wakeup_return:
++ movw $__KERNEL_DS, %ax
++ movw %ax, %ss
++ movw %ax, %ds
++ movw %ax, %es
++ movw %ax, %fs
++ movw %ax, %gs
++
++ lgdt saved_gdt
++ lidt saved_idt
++ lldt saved_ldt
++ ljmp $(__KERNEL_CS),$1f
++1:
++ movl %cr3, %eax
++ movl %eax, %cr3
++ wbinvd
++
++ # Go back to the return point
++ jmp ret_point
++
++save_registers:
++ sgdt saved_gdt
++ sidt saved_idt
++ sldt saved_ldt
++
++ pushl %edx
++ movl %cr4, %edx
++ movl %edx, saved_cr4
++
++ movl %cr0, %edx
++ movl %edx, saved_cr0
++
++ popl %edx
++
++
++ movl %ebx, saved_context_ebx
++ movl %ebp, saved_context_ebp
++ movl %esi, saved_context_esi
++ movl %edi, saved_context_edi
++
++ pushfl
++ popl saved_context_eflags
++
++ ret
++
++
++restore_registers:
++ movl saved_context_ebp, %ebp
++ movl saved_context_ebx, %ebx
++ movl saved_context_esi, %esi
++ movl saved_context_edi, %edi
++
++ pushl saved_context_eflags
++ popfl
++
++ ret
++
++
++ENTRY(do_olpc_suspend_lowlevel)
++ call save_processor_state
++ call save_registers
++
++ # This is the stack context we want to remember
++ movl %esp, saved_context_esp
++
++ pushl $3
++ call olpc_do_sleep
++
++ jmp wakeup_start
++ .p2align 4,,7
++ret_point:
++ movl saved_context_esp, %esp
++
++ writepost 0x32
++
++ call restore_registers
++ call restore_processor_state
++ ret
++
++.data
++ALIGN
++
++saved_gdt: .long 0,0
++saved_idt: .long 0,0
++saved_ldt: .long 0
++saved_cr4: .long 0
++saved_cr0: .long 0
++
+diff -purN linux_2.6.24_org/arch/x86/kernel/prom.c linux_2.6.24_olpc/arch/x86/kernel/prom.c
+--- linux_2.6.24_org/arch/x86/kernel/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/kernel/prom.c 2008-02-15 18:59:26.000000000 +0000
+@@ -0,0 +1,478 @@
++/*
++ * Procedures for creating, accessing and interpreting the device tree.
++ *
++ * Paul Mackerras August 1996.
++ * Copyright (C) 1996-2005 Paul Mackerras.
++ *
++ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
++ * {engebret|bergner}@us.ibm.com
++ *
++ * Adapted for sparc64 by David S. Miller davem@davemloft.net
++ *
++ * Adapter for i386/OLPC by Andres Salomon <dilinger@debian.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/bootmem.h>
++#include <linux/module.h>
++#include <asm/prom.h>
++#include <asm/ofw.h>
++
++/*
++ * XXX: This is very much a stub; right now we're keeping 2 device trees
++ * in memory (one for promfs, and one here). That will not remain
++ * for long!
++ */
++
++static struct device_node *allnodes;
++
++/* use when traversing tree through the allnext, child, sibling,
++ * or parent members of struct device_node.
++ */
++static DEFINE_RWLOCK(devtree_lock);
++
++int of_device_is_compatible(const struct device_node *device,
++ const char *compat)
++{
++ const char* cp;
++ int cplen, l;
++
++ cp = of_get_property(device, "compatible", &cplen);
++ if (cp == NULL)
++ return 0;
++ while (cplen > 0) {
++ if (strncmp(cp, compat, strlen(compat)) == 0)
++ return 1;
++ l = strlen(cp) + 1;
++ cp += l;
++ cplen -= l;
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL(of_device_is_compatible);
++
++struct device_node *of_get_parent(const struct device_node *node)
++{
++ struct device_node *np;
++
++ if (!node)
++ return NULL;
++
++ np = node->parent;
++
++ return np;
++}
++EXPORT_SYMBOL(of_get_parent);
++
++struct device_node *of_get_next_child(const struct device_node *node,
++ struct device_node *prev)
++{
++ struct device_node *next;
++
++ next = prev ? prev->sibling : node->child;
++ for (; next != 0; next = next->sibling) {
++ break;
++ }
++
++ return next;
++}
++EXPORT_SYMBOL(of_get_next_child);
++
++struct device_node *of_find_node_by_path(const char *path)
++{
++ struct device_node *np = allnodes;
++
++ for (; np != 0; np = np->allnext) {
++ if (np->full_name != 0 && strcmp(np->full_name, path) == 0)
++ break;
++ }
++
++ return np;
++}
++EXPORT_SYMBOL(of_find_node_by_path);
++
++struct device_node *of_find_node_by_phandle(phandle handle)
++{
++ struct device_node *np;
++
++ for (np = allnodes; np != 0; np = np->allnext)
++ if (np->node == handle)
++ break;
++
++ return np;
++}
++EXPORT_SYMBOL(of_find_node_by_phandle);
++
++struct device_node *of_find_node_by_name(struct device_node *from,
++ const char *name)
++{
++ struct device_node *np;
++
++ np = from ? from->allnext : allnodes;
++ for (; np != NULL; np = np->allnext)
++ if (np->name != NULL && strcmp(np->name, name) == 0)
++ break;
++
++ return np;
++}
++EXPORT_SYMBOL(of_find_node_by_name);
++
++struct device_node *of_find_node_by_type(struct device_node *from,
++ const char *type)
++{
++ struct device_node *np;
++
++ np = from ? from->allnext : allnodes;
++ for (; np != 0; np = np->allnext)
++ if (np->type != 0 && strcmp(np->type, type) == 0)
++ break;
++
++ return np;
++}
++EXPORT_SYMBOL(of_find_node_by_type);
++
++struct device_node *of_find_compatible_node(struct device_node *from,
++ const char *type, const char *compatible)
++{
++ struct device_node *np;
++
++ np = from ? from->allnext : allnodes;
++ for (; np != 0; np = np->allnext) {
++ if (type != NULL
++ && !(np->type != 0 && strcmp(np->type, type) == 0))
++ continue;
++ if (of_device_is_compatible(np, compatible))
++ break;
++ }
++
++ return np;
++}
++EXPORT_SYMBOL(of_find_compatible_node);
++
++struct property *of_find_property(const struct device_node *np,
++ const char *name,
++ int *lenp)
++{
++ struct property *pp;
++
++ for (pp = np->properties; pp != 0; pp = pp->next) {
++ if (strcasecmp(pp->name, name) == 0) {
++ if (lenp != 0)
++ *lenp = pp->length;
++ break;
++ }
++ }
++ return pp;
++}
++EXPORT_SYMBOL(of_find_property);
++
++/*
++ * Find a property with a given name for a given node
++ * and return the value.
++ */
++const void *of_get_property(const struct device_node *np, const char *name,
++ int *lenp)
++{
++ struct property *pp = of_find_property(np,name,lenp);
++ return pp ? pp->value : NULL;
++}
++EXPORT_SYMBOL(of_get_property);
++
++int of_getintprop_default(struct device_node *np, const char *name, int def)
++{
++ struct property *prop;
++ int len;
++
++ prop = of_find_property(np, name, &len);
++ if (!prop || len != 4)
++ return def;
++
++ return *(int *) prop->value;
++}
++EXPORT_SYMBOL(of_getintprop_default);
++
++int of_n_addr_cells(struct device_node *np)
++{
++ const int* ip;
++ do {
++ if (np->parent)
++ np = np->parent;
++ ip = of_get_property(np, "#address-cells", NULL);
++ if (ip != NULL)
++ return *ip;
++ } while (np->parent);
++ /* No #address-cells property for the root node, default to 2 */
++ return 2;
++}
++EXPORT_SYMBOL(of_n_addr_cells);
++
++int of_n_size_cells(struct device_node *np)
++{
++ const int* ip;
++ do {
++ if (np->parent)
++ np = np->parent;
++ ip = of_get_property(np, "#size-cells", NULL);
++ if (ip != NULL)
++ return *ip;
++ } while (np->parent);
++ /* No #size-cells property for the root node, default to 1 */
++ return 1;
++}
++EXPORT_SYMBOL(of_n_size_cells);
++
++int of_set_property(struct device_node *dp, const char *name, void *val, int len)
++{
++ return -EIO;
++}
++EXPORT_SYMBOL(of_set_property);
++
++static unsigned int prom_early_allocated;
++
++static void * __init prom_early_alloc(unsigned long size)
++{
++ void *ret;
++
++ ret = kmalloc(size, GFP_KERNEL);
++ if (ret != NULL)
++ memset(ret, 0, size);
++ else
++ printk(KERN_ERR "ACK! couldn't allocate prom memory!\n");
++
++ prom_early_allocated += size;
++
++ return ret;
++}
++
++static int is_root_node(const struct device_node *dp)
++{
++ if (!dp)
++ return 0;
++
++ return (dp->parent == NULL);
++}
++
++static char * __init build_path_component(struct device_node *dp)
++{
++ int pathlen;
++ char *n, *i;
++
++ if (ofw("package-to-path", 3, 1, dp->node, NULL, 0, &pathlen)) {
++ printk(KERN_ERR "PROM: unable to get path name from OFW!\n");
++ return "ERROR";
++ }
++ n = prom_early_alloc(pathlen + 1);
++ if (ofw("package-to-path", 3, 1, dp->node, n, pathlen+1, &pathlen))
++ printk(KERN_ERR "PROM: unable to get path name from OFW\n");
++
++ if ((i = strrchr(n, '/')))
++ n = ++i; /* we only want the file name */
++ return n;
++}
++
++static char * __init build_full_name(struct device_node *dp)
++{
++ int len, ourlen, plen;
++ char *n;
++
++ plen = strlen(dp->parent->full_name);
++ ourlen = strlen(dp->path_component_name);
++ len = ourlen + plen + 2;
++
++ n = prom_early_alloc(len);
++ strcpy(n, dp->parent->full_name);
++ if (!is_root_node(dp->parent)) {
++ strcpy(n + plen, "/");
++ plen++;
++ }
++ strcpy(n + plen, dp->path_component_name);
++
++ return n;
++}
++
++static struct property * __init build_one_prop(phandle node, char *prev, char *special_name, void *special_val, int special_len)
++{
++ static struct property *tmp = NULL;
++ struct property *p;
++
++ if (tmp) {
++ p = tmp;
++ memset(p, 0, sizeof(*p) + 32);
++ tmp = NULL;
++ } else {
++ p = prom_early_alloc(sizeof(struct property) + 32);
++ }
++
++ p->name = (char *) (p + 1);
++ if (special_name) {
++ strcpy(p->name, special_name);
++ p->length = special_len;
++ p->value = prom_early_alloc(special_len);
++ memcpy(p->value, special_val, special_len);
++ } else {
++ int fl;
++ if (prev == NULL) {
++ if (ofw("nextprop", 3, 1, node, "", p->name, &fl)) {
++ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
++ return NULL;
++ }
++ } else {
++ if (ofw("nextprop", 3, 1, node, prev, p->name, &fl)) {
++ printk(KERN_ERR "PROM: %s: nextprop failed!\n", __func__);
++ return NULL;
++ }
++ }
++ if (strlen(p->name) == 0 || fl != 1) {
++ tmp = p;
++ return NULL;
++ }
++ if (ofw("getproplen", 2, 1, node, p->name, &p->length)) {
++ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
++ return NULL;
++ }
++ if (p->length <= 0) {
++ p->length = 0;
++ } else {
++ p->value = prom_early_alloc(p->length + 1);
++ if (ofw("getprop", 4, 1, node, p->name, p->value, p->length, &p->length)) {
++ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
++ return NULL;
++ }
++ ((unsigned char *)p->value)[p->length] = '\0';
++ }
++ }
++ return p;
++}
++
++static struct property * __init build_prop_list(phandle node)
++{
++ struct property *head, *tail;
++
++ head = tail = build_one_prop(node, NULL,
++ ".node", &node, sizeof(node));
++
++ tail->next = build_one_prop(node, NULL, NULL, NULL, 0);
++ tail = tail->next;
++ while(tail) {
++ tail->next = build_one_prop(node, tail->name,
++ NULL, NULL, 0);
++ tail = tail->next;
++ }
++
++ return head;
++}
++
++static char * __init get_one_property(phandle node, const char *name)
++{
++ char *buf = "<NULL>";
++ int len;
++
++ if (ofw("getproplen", 2, 1, node, name, &len)) {
++ printk(KERN_ERR "PROM: %s: getproplen failed!\n", __func__);
++ return NULL;
++ }
++ if (len > 0) {
++ buf = prom_early_alloc(len);
++ if (ofw("getprop", 4, 1, node, name, buf, len, &len)) {
++ printk(KERN_ERR "PROM: %s: getprop failed!\n", __func__);
++ return NULL;
++ }
++ }
++
++ return buf;
++}
++
++static struct device_node * __init create_node(phandle node, struct device_node *parent)
++{
++ struct device_node *dp;
++
++ if (!node)
++ return NULL;
++
++ dp = prom_early_alloc(sizeof(*dp));
++ dp->parent = parent;
++
++ kref_init(&dp->kref);
++
++ dp->name = get_one_property(node, "name");
++ dp->type = get_one_property(node, "device_type");
++ dp->node = node;
++
++ dp->properties = build_prop_list(node);
++
++ return dp;
++}
++
++static struct device_node * __init build_tree(struct device_node *parent, phandle node, struct device_node ***nextp)
++{
++ struct device_node *ret = NULL, *prev_sibling = NULL;
++ struct device_node *dp;
++ u32 child;
++
++ while (1) {
++ dp = create_node(node, parent);
++ if (!dp)
++ break;
++
++ if (prev_sibling)
++ prev_sibling->sibling = dp;
++
++ if (!ret)
++ ret = dp;
++ prev_sibling = dp;
++
++ *(*nextp) = dp;
++ *nextp = &dp->allnext;
++
++ dp->path_component_name = build_path_component(dp);
++ dp->full_name = build_full_name(dp);
++
++ if (ofw("child", 1, 1, node, &child)) {
++ printk(KERN_ERR "PROM: %s: fetching child failed!\n", __func__);
++ return NULL;
++ }
++ dp->child = build_tree(dp, child, nextp);
++
++ if (ofw("peer", 1, 1, node, &node)) {
++ printk(KERN_ERR "PROM: %s: fetching peer failed!\n", __func__);
++ return NULL;
++ }
++ }
++
++ return ret;
++}
++
++static phandle root_node;
++
++void __init prom_build_devicetree(void)
++{
++ struct device_node **nextp;
++ u32 child;
++
++ if (ofw("peer", 1, 1, 0, &root_node)) {
++ printk(KERN_ERR "PROM: unable to get root node from OFW!\n");
++ return;
++ }
++
++ allnodes = create_node(root_node, NULL);
++ allnodes->path_component_name = "";
++ allnodes->full_name = "/";
++
++ nextp = &allnodes->allnext;
++ if (ofw("child", 1, 1, allnodes->node, &child)) {
++ printk(KERN_ERR "PROM: unable to get child node from OFW!\n");
++ return;
++ }
++ allnodes->child = build_tree(allnodes, child, &nextp);
++ printk("PROM: Built device tree with %u bytes of memory.\n",
++ prom_early_allocated);
++}
+diff -purN linux_2.6.24_org/arch/x86/pci/olpc.c linux_2.6.24_olpc/arch/x86/pci/olpc.c
+--- linux_2.6.24_org/arch/x86/pci/olpc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/arch/x86/pci/olpc.c 2008-02-15 18:59:22.000000000 +0000
+@@ -0,0 +1,298 @@
++/*
++ * olpcpci.c - Low-level PCI config space access for OLPC systems
++ * without the VSA PCI virtualization software.
++ *
++ * The AMD Geode chipset (GX2 processor, cs5536 I/O companion device)
++ * has some I/O functions (display, southbridge, sound, USB HCIs, etc)
++ * that more or less behave like PCI devices, but the hardware doesn't
++ * directly implement the PCI configuration space headers. AMD provides
++ * "VSA" (Virtual System Architecture) software that emulates PCI config
++ * space for these devices, by trapping I/O accesses to PCI config register
++ * (CF8/CFC) and running some code in System Management Mode interrupt state.
++ * On the OLPC platform, we don't want to use that VSA code because
++ * (a) it slows down suspend/resume, and (b) recompiling it requires special
++ * compilers that are hard to get. So instead of letting the complex VSA
++ * code simulate the PCI config registers for the on-chip devices, we
++ * just simulate them the easy way, by inserting the code into the
++ * pci_write_config and pci_read_config path. Most of the config registers
++ * are read-only anyway, so the bulk of the simulation is just table lookup.
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <asm/olpc.h>
++#include <asm/geode.h>
++#include "pci.h"
++
++static int is_lx;
++
++/*
++ * In the tables below, the first two line (8 longwords) are the
++ * size masks that are used when the higher level PCI code determines
++ * the size of the region by writing ~0 to a base address register
++ * and reading back the result.
++ *
++ * The following lines are the values that are read during normal
++ * PCI config access cycles, i.e. not after just having written
++ * ~0 to a base address register.
++ */
++
++static const u32 lxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x281022 , 0x2200005 , 0x6000021 , 0x80f808 , /* AMD Vendor ID */
++ 0x0 , 0x0 , 0x0 , 0x0 , /* No virtual registers, hence no BAR for them */
++ 0x0 , 0x0 , 0x0 , 0x28100b ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 gxnb_hdr[] = { /* dev 1 function 0 - devfn = 8 */
++ 0xfffffffd , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x28100b , 0x2200005 , 0x6000021 , 0x80f808 , /* NSC Vendor ID */
++ 0xac1d , 0x0 , 0x0 , 0x0 , /* I/O BAR - base of virtual registers */
++ 0x0 , 0x0 , 0x0 , 0x28100b ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 lxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
++ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x20811022 , 0x2200003 , 0x3000000 , 0x0 , /* AMD Vendor ID */
++ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
++ 0xfe00c000 , 0x0 , 0x0 , 0x30100b , /* VIP */
++ 0x0 , 0x0 , 0x0 , 0x10e , /* INTA, IRQ14 for graphics accel */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 gxfb_hdr[] = { /* dev 1 function 1 - devfn = 9 */
++ 0xff800008 , 0xffffc000 , 0xffffc000 , 0xffffc000 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x30100b , 0x2200003 , 0x3000000 , 0x0 , /* NSC Vendor ID */
++ 0xfd000000 , 0xfe000000 , 0xfe004000 , 0xfe008000 , /* FB, GP, VG, DF */
++ 0x0 , 0x0 , 0x0 , 0x30100b ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x3d0 , 0x3c0 , 0xa0000 , 0x0 , /* VG IO, VG IO, EGA FB, MONO FB */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 aes_hdr[] = { /* dev 1 function 2 - devfn = 0xa */
++ 0xffffc000 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x20821022 , 0x2a00006 , 0x10100000 , 0x8 , /* NSC Vendor ID */
++ 0xfe010000 , 0x0 , 0x0 , 0x0 , /* AES registers */
++ 0x0 , 0x0 , 0x0 , 0x20821022 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++
++static const u32 isa_hdr[] = { /* dev f function 0 - devfn = 78 */
++ 0xfffffff9 , 0xffffff01 , 0xffffffc1 , 0xffffffe1 ,
++ 0xffffff81 , 0xffffffc1 , 0x0 , 0x0 ,
++
++ 0x20901022 , 0x2a00049 , 0x6010003 , 0x802000 ,
++ 0x18b1 , 0x1001 , 0x1801 , 0x1881 , /* SMB-8 GPIO-256 MFGPT-64 IRQ-32 */
++ 0x1401 , 0x1841 , 0x0 , 0x20901022 , /* PMS-128 ACPI-64 */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0xaa5b , /* interrupt steering */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 ac97_hdr[] = { /* dev f function 3 - devfn = 7b */
++ 0xffffff81 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x20931022 , 0x2a00041 , 0x4010001 , 0x0 ,
++ 0x1481 , 0x0 , 0x0 , 0x0 , /* I/O BAR-128 */
++ 0x0 , 0x0 , 0x0 , 0x20931022 ,
++ 0x0 , 0x0 , 0x0 , 0x205 , /* IntB , IRQ5 */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 ohci_hdr[] = { /* dev f function 4 - devfn = 7c */
++ 0xfffff000 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x20941022 , 0x2300006 , 0xc031002 , 0x0 ,
++ 0xfe01a000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
++ 0x0 , 0x0 , 0x0 , 0x20941022 ,
++ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
++ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++};
++
++static const u32 ehci_hdr[] = { /* dev f function 4 - devfn = 7d */
++ 0xfffff000 , 0x0 , 0x0 , 0x0 ,
++ 0x0 , 0x0 , 0x0 , 0x0 ,
++
++ 0x20951022 , 0x2300006 , 0xc032002 , 0x0 ,
++ 0xfe01b000 , 0x0 , 0x0 , 0x0 , /* MEMBAR-1000 */
++ 0x0 , 0x0 , 0x0 , 0x20951022 ,
++ 0x0 , 0x40 , 0x0 , 0x40a , /* CapPtr INT-D, IRQ A */
++ 0xc8020001 , 0x0 , 0x0 , 0x0 , /* Capabilities - 40 is R/O, 44 is mask 8103 (power control) */
++#if 0
++ 0x1 , 0x40080000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
++#endif
++ 0x01000001 , 0x00000000 , 0x0 , 0x0 , /* EECP - see section 2.1.7 of EHCI spec */
++ 0x2020 , 0x0 , 0x0 , 0x0 , /* (EHCI page 8) 60 SBRN (R/O), 61 FLADJ (R/W), PORTWAKECAP */
++};
++
++static u32 ff_loc = ~0;
++static u32 zero_loc = 0;
++
++static int bar_probing = 0; /* Set after a write of ~0 to a BAR */
++
++#define NB_SLOT 0x1 /* Northbridge - GX chip - Device 1 */
++#define SB_SLOT 0xf /* Southbridge - CS5536 chip - Device F */
++#define SIMULATED(bus, devfn) (((bus) == 0) && ((PCI_SLOT(devfn) == NB_SLOT) || (PCI_SLOT(devfn) == SB_SLOT)))
++
++static u32 *hdr_addr(const u32 *hdr, int reg)
++{
++ u32 addr;
++
++ /*
++ * This is a little bit tricky. The header maps consist of
++ * 0x20 bytes of size masks, followed by 0x70 bytes of header data.
++ * In the normal case, when not probing a BAR's size, we want
++ * to access the header data, so we add 0x20 to the reg offset,
++ * thus skipping the size mask area.
++ * In the BAR probing case, we want to access the size mask for
++ * the BAR, so we subtract 0x10 (the config header offset for
++ * BAR0), and don't skip the size mask area.
++ */
++
++ addr = (u32)hdr + reg + (bar_probing ? -0x10 : 0x20);
++
++ bar_probing = 0;
++ return (u32 *)addr;
++}
++
++static int pci_olpc_read(unsigned int seg, unsigned int bus,
++ unsigned int devfn, int reg, int len, u32 *value)
++{
++ u32 *addr;
++
++ /* Use the hardware mechanism for non-simulated devices */
++ if (!SIMULATED(bus, devfn))
++ return pci_conf1_read(seg, bus, devfn, reg, len, value);
++
++ /*
++ * No device has config registers past 0x70, so we save table space
++ * by not storing entries for the nonexistent registers
++ */
++ if (reg >= 0x70)
++ addr = &zero_loc;
++ else {
++ switch (devfn) {
++ case 0x8:
++ addr = hdr_addr(is_lx ? lxnb_hdr : gxnb_hdr, reg);
++ break;
++ case 0x9:
++ addr = hdr_addr(is_lx ? lxfb_hdr : gxfb_hdr, reg);
++ break;
++ case 0xa:
++ addr = is_lx ? hdr_addr(aes_hdr, reg) : &ff_loc;
++ break;
++ case 0x78:
++ addr = hdr_addr(isa_hdr, reg);
++ break;
++ case 0x7b:
++ addr = hdr_addr(ac97_hdr, reg);
++ break;
++ case 0x7c:
++ addr = hdr_addr(ohci_hdr, reg);
++ break;
++ case 0x7d:
++ addr = hdr_addr(ehci_hdr, reg);
++ break;
++ default:
++ addr = &ff_loc;
++ break;
++ }
++ }
++ switch (len) {
++ case 1:
++ *value = *(u8 *) addr;
++ break;
++ case 2:
++ *value = *(u16 *) addr;
++ break;
++ case 4:
++ *value = *addr;
++ break;
++ default:
++ BUG();
++ }
++
++ return 0;
++}
++
++static int pci_olpc_write(unsigned int seg, unsigned int bus,
++ unsigned int devfn, int reg, int len, u32 value)
++{
++ /* Use the hardware mechanism for non-simulated devices */
++ if (!SIMULATED(bus, devfn))
++ return pci_conf1_write(seg, bus, devfn, reg, len, value);
++
++ /* XXX we may want to extend this to simulate EHCI power management */
++
++ /*
++ * Mostly we just discard writes, but if the write is a size probe
++ * (i.e. writing ~0 to a BAR), we remember it and arrange to return
++ * the appropriate size mask on the next read. This is cheating
++ * to some extent, because it depends on the fact that the next
++ * access after such a write will always be a read to the same BAR.
++ */
++
++ if ((reg >= 0x10) && (reg < 0x2c)) {
++ /* Write is to a BAR */
++ if (value == ~0)
++ bar_probing = 1;
++ } else {
++ /*
++ * No warning on writes to ROM BAR, CMD, LATENCY_TIMER,
++ * CACHE_LINE_SIZE, or PM registers.
++ */
++ if ((reg != 0x30) && (reg != 0x04) && (reg != 0x0d) &&
++ (reg != 0x0c) && (reg != 0x44))
++ printk(KERN_WARNING "OLPC PCI: Config write to devfn %x reg %x value %x\n", devfn, reg, value);
++ }
++
++ return 0;
++}
++
++static struct pci_raw_ops pci_olpc_conf = {
++ .read = pci_olpc_read,
++ .write = pci_olpc_write,
++};
++
++void __init pci_olpc_init(void)
++{
++ if (!machine_is_olpc() || olpc_has_vsa())
++ return;
++
++ printk(KERN_INFO "PCI: Using configuration type OLPC\n");
++ raw_pci_ops = &pci_olpc_conf;
++ is_lx = is_geode_lx();
++}
+diff -purN linux_2.6.24_org/Documentation/kernel-parameters.txt linux_2.6.24_olpc/Documentation/kernel-parameters.txt
+--- linux_2.6.24_org/Documentation/kernel-parameters.txt 2008-02-15 20:12:29.000000000 +0000
++++ linux_2.6.24_olpc/Documentation/kernel-parameters.txt 2008-02-15 18:59:54.000000000 +0000
+@@ -1244,6 +1244,13 @@ and is between 256 and 4096 characters.
+
+ nr_uarts= [SERIAL] maximum number of UARTs to be registered.
+
++ olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
++ Rather than timing out after 20 ms if an EC
++ command is not properly ACKed, override the length
++ of the timeout. We have interrupts disabled while
++ waiting for the ACK, so if this is set too high
++ interrupts *may* be lost!
++
+ opl3= [HW,OSS]
+ Format: <io>
+
+diff -purN linux_2.6.24_org/drivers/base/dd.c linux_2.6.24_olpc/drivers/base/dd.c
+--- linux_2.6.24_org/drivers/base/dd.c 2008-02-15 20:11:29.000000000 +0000
++++ linux_2.6.24_olpc/drivers/base/dd.c 2008-02-15 18:58:46.000000000 +0000
+@@ -293,7 +293,6 @@ static void __device_release_driver(stru
+ if (drv) {
+ driver_sysfs_remove(dev);
+ sysfs_remove_link(&dev->kobj, "driver");
+- klist_remove(&dev->knode_driver);
+
+ if (dev->bus)
+ blocking_notifier_call_chain(&dev->bus->bus_notifier,
+@@ -306,6 +305,7 @@ static void __device_release_driver(stru
+ drv->remove(dev);
+ devres_release_all(dev);
+ dev->driver = NULL;
++ klist_remove(&dev->knode_driver);
+ put_driver(drv);
+ }
+ }
+diff -purN linux_2.6.24_org/drivers/char/vt_ioctl.c linux_2.6.24_olpc/drivers/char/vt_ioctl.c
+--- linux_2.6.24_org/drivers/char/vt_ioctl.c 2008-02-15 20:11:48.000000000 +0000
++++ linux_2.6.24_olpc/drivers/char/vt_ioctl.c 2008-02-15 18:59:11.000000000 +0000
+@@ -38,6 +38,9 @@
+ char vt_dont_switch;
+ extern struct tty_driver *console_driver;
+
++/* Add a notifier chain to inform drivers of a VT_TEXT/VT_GRAPHICS switch */
++RAW_NOTIFIER_HEAD(console_notifier_list);
++
+ #define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
+ #define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+
+@@ -492,6 +495,14 @@ int vt_ioctl(struct tty_struct *tty, str
+ vc->vc_mode = (unsigned char) arg;
+ if (console != fg_console)
+ return 0;
++
++ /* Notify listeners if the current fg_console has switched */
++
++ raw_notifier_call_chain(&console_notifier_list,
++ (arg == KD_TEXT) ?
++ CONSOLE_EVENT_SWITCH_TEXT :
++ CONSOLE_EVENT_SWITCH_GRAPHICS, 0);
++
+ /*
+ * explicitly blank/unblank the screen if switching modes
+ */
+diff -purN linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c
+--- linux_2.6.24_org/drivers/i2c/busses/scx200_acb.c 2008-02-15 20:11:33.000000000 +0000
++++ linux_2.6.24_olpc/drivers/i2c/busses/scx200_acb.c 2008-02-15 18:58:49.000000000 +0000
+@@ -46,6 +46,10 @@ static int base[MAX_DEVICES] = { 0x820,
+ module_param_array(base, int, NULL, 0);
+ MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers");
+
++static unsigned int smbclk = 0x70;
++module_param(smbclk, uint, 0);
++MODULE_PARM_DESC(smbclk, "Specify the SMB_CLK value");
++
+ #define POLL_TIMEOUT (HZ/5)
+
+ enum scx200_acb_state {
+@@ -108,6 +112,7 @@ struct scx200_acb_iface {
+ #define ACBADDR (iface->base + 4)
+ #define ACBCTL2 (iface->base + 5)
+ #define ACBCTL2_ENABLE 0x01
++#define ACBCTL3 (iface->base + 6)
+
+ /************************************************************************/
+
+@@ -392,11 +397,13 @@ static __init int scx200_acb_probe(struc
+ {
+ u8 val;
+
+- /* Disable the ACCESS.bus device and Configure the SCL
+- frequency: 16 clock cycles */
+- outb(0x70, ACBCTL2);
++ /* Disable the ACCESS.bus device and Configure the SCL */
++
++ outb((smbclk & 0x7F) << 1, ACBCTL2);
++
++ outb((smbclk >> 7) & 0xFF, ACBCTL3);
+
+- if (inb(ACBCTL2) != 0x70) {
++ if (inb(ACBCTL2) != ((smbclk & 0x7F) << 1)) {
+ pr_debug(NAME ": ACBCTL2 readback failed\n");
+ return -ENXIO;
+ }
+diff -purN linux_2.6.24_org/drivers/input/keyboard/atkbd.c linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c
+--- linux_2.6.24_org/drivers/input/keyboard/atkbd.c 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/keyboard/atkbd.c 2008-02-15 18:59:14.000000000 +0000
+@@ -63,12 +63,25 @@ static int atkbd_extra;
+ module_param_named(extra, atkbd_extra, bool, 0);
+ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+
++#define ATKBD_KEY_UNKNOWN 0
++#define ATKBD_KEY_NULL 0xFF0000FF
++
++#define ATKBD_SCR_1 0xFF0000FE
++#define ATKBD_SCR_2 0xFF0000FD
++#define ATKBD_SCR_4 0xFF0000FC
++#define ATKBD_SCR_8 0xFF0000FB
++#define ATKBD_SCR_CLICK 0xFF0000FA
++#define ATKBD_SCR_LEFT 0xFF0000F9
++#define ATKBD_SCR_RIGHT 0xFF0000F8
++
++#define ATKBD_SPECIAL 0xFF0000F8
++
+ /*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via an userland utility.
+ */
+
+-static unsigned char atkbd_set2_keycode[512] = {
++static unsigned int atkbd_set2_keycode[512] = {
+
+ #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
+
+@@ -87,11 +100,17 @@ static unsigned char atkbd_set2_keycode[
+ 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+- 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
++
++ 217,100,ATKBD_KEY_NULL, 0, 97,165, 0, 0,
++ 156, 0, 0, 0, 0, 0, 0,125,
++
+ 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
+ 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
+ 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
+- 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
++
++ 226, 0, 0, 0, 0, 0, 0, 0,
++ 0,ATKBD_KEY_NULL, 96, 0, 0, 0,143, 0,
++
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
+ 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
+
+@@ -150,19 +169,6 @@ static unsigned char atkbd_unxlate_table
+ #define ATKBD_RET_HANGEUL 0xf2
+ #define ATKBD_RET_ERR 0xff
+
+-#define ATKBD_KEY_UNKNOWN 0
+-#define ATKBD_KEY_NULL 255
+-
+-#define ATKBD_SCR_1 254
+-#define ATKBD_SCR_2 253
+-#define ATKBD_SCR_4 252
+-#define ATKBD_SCR_8 251
+-#define ATKBD_SCR_CLICK 250
+-#define ATKBD_SCR_LEFT 249
+-#define ATKBD_SCR_RIGHT 248
+-
+-#define ATKBD_SPECIAL 248
+-
+ #define ATKBD_LED_EVENT_BIT 0
+ #define ATKBD_REP_EVENT_BIT 1
+
+@@ -174,7 +180,7 @@ static unsigned char atkbd_unxlate_table
+ #define ATKBD_XL_HANJA 0x20
+
+ static struct {
+- unsigned char keycode;
++ unsigned int keycode;
+ unsigned char set2;
+ } atkbd_scroll_keys[] = {
+ { ATKBD_SCR_1, 0xc5 },
+@@ -200,7 +206,7 @@ struct atkbd {
+ char phys[32];
+
+ unsigned short id;
+- unsigned char keycode[512];
++ unsigned int keycode[512];
+ unsigned char set;
+ unsigned char translated;
+ unsigned char extra;
+@@ -351,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struc
+ unsigned int code = data;
+ int scroll = 0, hscroll = 0, click = -1, add_release_event = 0;
+ int value;
+- unsigned char keycode;
++ unsigned int keycode;
+
+ #ifdef ATKBD_DEBUG
+ printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
+@@ -856,9 +862,11 @@ static void atkbd_set_keycode_table(stru
+ atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
+ }
+ } else if (atkbd->set == 3) {
+- memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
++ for (i = 0; i < ARRAY_SIZE(atkbd_set3_keycode); i++)
++ atkbd->keycode[i] = atkbd_set3_keycode[i];
+ } else {
+- memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
++ for (i = 0; i < ARRAY_SIZE(atkbd_set2_keycode); i++)
++ atkbd->keycode[i] = atkbd_set2_keycode[i];
+
+ if (atkbd->scroll)
+ for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
+@@ -930,8 +938,8 @@ static void atkbd_set_device_attrs(struc
+ }
+
+ input_dev->keycode = atkbd->keycode;
+- input_dev->keycodesize = sizeof(unsigned char);
+- input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
++ input_dev->keycodesize = sizeof(unsigned int);
++ input_dev->keycodemax = ARRAY_SIZE(atkbd->keycode);
+
+ for (i = 0; i < 512; i++)
+ if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
+@@ -1022,6 +1030,10 @@ static int atkbd_connect(struct serio *s
+ return err;
+ }
+
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ /*
+ * atkbd_reconnect() tries to restore keyboard into a sane state and is
+ * most likely called on resume.
+@@ -1032,6 +1044,12 @@ static int atkbd_reconnect(struct serio
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ struct serio_driver *drv = serio->drv;
+
++#ifdef CONFIG_OLPC
++ if (olpc_board_at_least(olpc_board_pre(0xb3)))
++ if (serio->dev.power.power_state.event != PM_EVENT_ON)
++ return 0;
++#endif
++
+ if (!atkbd || !drv) {
+ printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+ return -1;
+diff -purN linux_2.6.24_org/drivers/input/mouse/Kconfig linux_2.6.24_olpc/drivers/input/mouse/Kconfig
+--- linux_2.6.24_org/drivers/input/mouse/Kconfig 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/Kconfig 2008-02-15 18:59:14.000000000 +0000
+@@ -96,6 +96,16 @@ config MOUSE_PS2_TOUCHKIT
+
+ If unsure, say N.
+
++config MOUSE_PS2_OLPC
++ bool "OLPC PS/2 mouse protocol extension" if EMBEDDED
++ default n
++ depends on MOUSE_PS2 && OLPC
++ ---help---
++ Say Y here if you have an OLPC PS/2 touchpad connected to
++ your system.
++
++ If unsure, say N.
++
+ config MOUSE_SERIAL
+ tristate "Serial mouse"
+ select SERIO
+diff -purN linux_2.6.24_org/drivers/input/mouse/Makefile linux_2.6.24_olpc/drivers/input/mouse/Makefile
+--- linux_2.6.24_org/drivers/input/mouse/Makefile 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/Makefile 2008-02-15 18:59:14.000000000 +0000
+@@ -24,3 +24,4 @@ psmouse-$(CONFIG_MOUSE_PS2_LOGIPS2PP) +=
+ psmouse-$(CONFIG_MOUSE_PS2_LIFEBOOK) += lifebook.o
+ psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
+ psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
++psmouse-$(CONFIG_MOUSE_PS2_OLPC) += olpc.o
+diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.c linux_2.6.24_olpc/drivers/input/mouse/olpc.c
+--- linux_2.6.24_org/drivers/input/mouse/olpc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/input/mouse/olpc.c 2008-02-15 18:59:14.000000000 +0000
+@@ -0,0 +1,837 @@
++/*
++ * OLPC touchpad PS/2 mouse driver
++ *
++ * Copyright (c) 2006-2008 One Laptop Per Child
++ * Authors:
++ * Zephaniah E. Hull
++ * Andres Salomon <dilinger@laptop.org>
++ *
++ * This driver is partly based on the ALPS driver, which is:
++ *
++ * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
++ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
++ * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
++ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++/*
++ * The touchpad on the OLPC is fairly wide, with the entire area usable
++ * as a tablet (Pen Tablet/PT), and the center 1/3rd also usable as a
++ * touchpad (Glide Sensor/GS). The spec from ALPS is available from
++ * <http://wiki.laptop.org/go/Touch_Pad/Tablet>. It refers to this
++ * device as HGPK (Hybrid GS, PT, and Keymatrix).
++ *
++ * Earlier version of the device had simultaneous reporting; however, that
++ * was removed. Instead, the device now reports packets in one mode, and
++ * tells the driver when a mode switch needs to happen.
++ */
++
++#define DEBUG
++#include <linux/input.h>
++#include <linux/serio.h>
++#include <linux/libps2.h>
++#include <linux/delay.h>
++#include <asm/olpc.h>
++
++#include "psmouse.h"
++#include "olpc.h"
++
++static int tpdebug;
++module_param(tpdebug, int, 0644);
++
++static int ignore_delta = 60;
++module_param(ignore_delta, int, 0644);
++MODULE_PARM_DESC(ignore_delta, "ignore packets that cause an X or Y delta larger than this value.");
++
++/*
++ * With older hardware, a finger-up event is sometimes not sent. If it's been
++ * more than 50mS since the last packet, we can safely assume that there was
++ * a finger-up event that we never received.
++ */
++static void hgpk_fingerup_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++ struct hgpk_data *priv = psmouse->private;
++ struct timeval now_tv;
++ s64 now_ns;
++
++ if (psmouse->model >= HGPK_MODEL_C)
++ return;
++
++ if (p->gs_down || p->pt_down) {
++ do_gettimeofday(&now_tv);
++ now_ns = timeval_to_ns(&now_tv);
++
++ if (priv->late && now_ns >= priv->late) {
++ struct input_dev *pt = psmouse->dev;
++ struct input_dev *gs = priv->gs;
++
++ input_report_key(pt, BTN_TOUCH, 0);
++ input_report_key(gs, BTN_TOUCH, 0);
++ input_sync(pt);
++ input_sync(gs);
++ hgpk_dbg(psmouse, "Missing finger-up packet detected, "
++ "working around buggy hardware.\n");
++ }
++ priv->late = now_ns + (50 * NSEC_PER_MSEC);
++ } else
++ priv->late = 0;
++}
++
++/*
++ * C and D series touchpads send an extra finger-up packet to ensure we've
++ * seen it. That's all well and good, but for some uncomprehensible reason
++ * they sometimes also get stuck in a state where they also send an
++ * extra finger-down packet with coordinates of x=0, y=0. This royally
++ * screws relative positioning; end users see it as the touchpad jumping
++ * around when they first put their finger down. This works around that.
++ *
++ * *Sigh*. ALPS..
++ */
++static void hgpk_fingerdown_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++ if (psmouse->model < HGPK_MODEL_C)
++ return;
++
++ /* we only care about x=0, y=0 packets */
++ if (p->x != 0 || p->y != 0)
++ return;
++
++ /*
++ * if we're a gs_down packet but we were not previously down,
++ * we're going to assume that this is one of those spurious packets
++ * that needs to be worked around.
++ */
++ if (p->gs_down && !test_bit(BTN_TOUCH, p->dev->key)) {
++ hgpk_dbg(psmouse, "spurious GS finger-down packet\n");
++ p->gs_down = 0;
++ } else if (p->pt_down && !test_bit(BTN_TOUCH, p->dev->key)) {
++ hgpk_dbg(psmouse, "spurious PT finger-down packet\n");
++ p->pt_down = 0;
++ }
++}
++
++/*
++ * In general, we have lots of calibration problems that manifest
++ * themselves as jumpy mouse pointers. Miscalibration, capacitance issues
++ * with the hardware, etc; these make the touchpad detect errant packets
++ * at random places all over the place. Since we don't expect large deltas
++ * to ever actually be useful, we'll large axis changes that go over our
++ * threshold.
++ */
++static void hgpk_big_delta_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++ struct hgpk_data *priv = psmouse->private;
++ struct input_dev *dev = p->dev;
++
++ /* afaik, this happens on all hardware */
++
++ /* ignore finger-up packets */
++ if (!p->pt_down && !p->gs_down)
++ goto done;
++
++ /* ensure that we're not a finger-down packet */
++ if ((p->pt_down && !test_bit(BTN_TOUCH, dev->key)) ||
++ (p->gs_down && !test_bit(BTN_TOUCH, dev->key)))
++ goto done;
++
++ if (abs(dev->abs[ABS_X] - p->x) > ignore_delta ||
++ abs(dev->abs[ABS_Y] - p->y) > ignore_delta) {
++ hgpk_dbg(psmouse, "axis change (%d,%d) => (%d,%d) is over "
++ "delta threshold\n", dev->abs[ABS_X],
++ dev->abs[ABS_Y], p->x, p->y);
++ input_report_key(dev, BTN_TOUCH, 0);
++ input_sync(dev);
++
++
++ /* two in a row is a pretty good indicator of miscalibration */
++ if (priv->axis_errors++) {
++ /* wait 2s for finger removal, and then recalibrate */
++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq,
++ msecs_to_jiffies(2000));
++ priv->axis_errors = 0;
++ }
++ return;
++ }
++done:
++ priv->axis_errors = 0;
++}
++
++/*
++ * This is my favorite touchpad hardware bug. I'm entirely not sure what
++ * triggers it (I've seen it triggered while the laptop was left on overnight,
++ * but my cat could have very well been using it/sleeping on it). However,
++ * the touchpad will randomly get stuck in a state where it constantly spews
++ * packets without a finger being on it. A recalibration will fix it, but
++ * without that it will go on for days (auto-recalibration doesn't catch it,
++ * either). The packets tend to either have the same coordinates, or be
++ * 1px away from each other; ie, (283,139,6) -> (284,139,5) -> (285,139,5) ->
++ * (286,139,6) -> (286,139,6) -> etc. We have a number of workarounds here..
++ */
++static void hgpk_spewing_hack(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++ struct hgpk_data *priv = psmouse->private;
++ struct input_dev *dev = p->dev;
++ int repeat_axes;
++
++ if (psmouse->model < HGPK_MODEL_C)
++ return;
++
++ /* ignore 0, 0 packets */
++ if (p->x == 0 && p->y == 0)
++ return;
++
++ /* PT packets don't count */
++ if (p->pt_down) {
++ priv->repeat_pkts = 0;
++ return;
++ }
++
++ /*
++ * If we see 2s+ worth of packets that have at least 2 axis deltas of
++ * only 1px, that's a good indication that we're spewing packets.
++ * We're going to ignore z=15, though; that's pretty indicative of
++ * an actual finger on the touchpad just staying still.
++ */
++ if (p->z == 0 || p->z == 15)
++ goto next_hack;
++ repeat_axes = abs(p->x - dev->abs[ABS_X]) < 2 ? 1 : 0;
++ repeat_axes += abs(p->y - dev->abs[ABS_Y]) < 2 ? 1 : 0;
++ repeat_axes += abs(p->z - dev->abs[ABS_PRESSURE]) < 2 ? 1 : 0;
++ if (repeat_axes > 1) {
++ priv->repeat_pkts++;
++ /* we get 1 packet about every 24mS */
++ if (priv->repeat_pkts > 83) {
++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, 0);
++ priv->repeat_pkts = 0;
++ }
++ }
++ else
++ priv->repeat_pkts = 0;
++ return;
++
++next_hack:
++ /*
++ * 10s of y and z not changing is another kind of miscalibration.
++ */
++ repeat_axes = (p->y == dev->abs[ABS_Y]) ? 1 : 0;
++ repeat_axes += (p->z == dev->abs[ABS_PRESSURE]) ? 1 : 0;
++ if (repeat_axes > 1) {
++ priv->repeat_pkts++;
++ if (priv->repeat_pkts > 416) {
++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq, 0);
++ priv->repeat_pkts = 0;
++ }
++ }
++ else
++ priv->repeat_pkts = 0;
++}
++
++/*
++ * HGPK Advanced Mode - single-mode format
++ *
++ * byte 0(PT): 1 1 0 0 1 1 1 1
++ * byte 0(GS): 1 1 1 1 1 1 1 1
++ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
++ * byte 2(PT): 0 0 x9 x8 x7 ? pt-dsw 0
++ * byte 2(GS): 0 x10 x9 x8 x7 ? gs-dsw pt-dsw
++ * byte 3: 0 y9 y8 y7 1 0 swr swl
++ * byte 4: 0 y6 y5 y4 y3 y2 y1 y0
++ * byte 5: 0 z6 z5 z4 z3 z2 z1 z0
++ *
++ * ?'s are not defined in the protocol spec, may vary between models.
++ *
++ * swr/swl are the left/right buttons.
++ *
++ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
++ * pen/finger
++ */
++
++static int hgpk_validate_byte(unsigned char *packet, int pktcnt)
++{
++ BUG_ON(pktcnt < 1);
++
++ if (packet[0] != HGPK_PT && packet[0] != HGPK_GS)
++ return -1;
++
++ /* bytes 2 - 6 should have 0 in the highest bit */
++ if (pktcnt >= 2 && pktcnt <= 6 && (packet[pktcnt - 1] & 0x80))
++ return -1;
++
++ return 0;
++}
++
++static void hgpk_decode_packet(struct psmouse *psmouse, struct hgpk_packet *p)
++{
++ unsigned char *packet = psmouse->packet;
++
++ BUG_ON(psmouse->pktcnt < 6);
++
++ p->left = packet[3] & 1;
++ p->right = !!(packet[3] & 2);
++ p->x = packet[1] | ((packet[2] & 0x78) << 4);
++ p->y = packet[4] | ((packet[3] & 0x70) << 3);
++ p->z = packet[5];
++
++ if (packet[0] == HGPK_GS) {
++ p->pt_down = !!(packet[2] & 1);
++ p->gs_down = !!(packet[2] & 2);
++ p->dev = ((struct hgpk_data *) psmouse->private)->gs;
++ if (p->pt_down) {
++ /* we miss spurious PT finger-downs if pt_down is set */
++ p->mode_switch = HGPK_PT;
++ p->pt_down = 0;
++ } else {
++ p->mode_switch = 0;
++ }
++ } else if (packet[0] == HGPK_PT) {
++ p->pt_down = !!(packet[2] & 2);
++ p->gs_down = 0;
++ p->dev = psmouse->dev;
++ p->mode_switch = !p->pt_down ? HGPK_GS : 0;
++ }
++
++ if (tpdebug) {
++ hgpk_dbg(psmouse, "l=%d r=%d p=%d g=%d x=%d y=%d z=%d m=%x\n",
++ p->left, p->right, p->pt_down, p->gs_down,
++ p->x, p->y, p->z, p->mode_switch);
++ }
++}
++
++static void hgpk_process_packet_gspt(struct psmouse *psmouse)
++{
++ struct hgpk_data *priv = psmouse->private;
++ struct input_dev *pt = psmouse->dev;
++ struct input_dev *gs = priv->gs;
++ struct hgpk_packet pkt;
++
++ hgpk_decode_packet(psmouse, &pkt);
++
++ hgpk_fingerup_hack(psmouse, &pkt);
++ hgpk_fingerdown_hack(psmouse, &pkt);
++ hgpk_big_delta_hack(psmouse, &pkt);
++ hgpk_spewing_hack(psmouse, &pkt);
++
++ input_report_key(pt, BTN_LEFT, pkt.left);
++ input_report_key(pt, BTN_RIGHT, pkt.right);
++ input_report_key(pt, BTN_TOUCH, pkt.pt_down);
++
++ input_report_key(gs, BTN_LEFT, pkt.left);
++ input_report_key(gs, BTN_RIGHT, pkt.right);
++ input_report_key(gs, BTN_TOUCH, pkt.gs_down);
++
++ input_report_abs(pkt.dev, ABS_X, pkt.x);
++ input_report_abs(pkt.dev, ABS_Y, pkt.y);
++ input_report_abs(pkt.dev, ABS_PRESSURE, pkt.z);
++
++ input_sync(pt);
++ input_sync(gs);
++
++ if (priv->recalib_window) {
++ if (time_before(jiffies, priv->recalib_window)) {
++ /*
++ * ugh, got a packet inside our recalibration
++ * window, schedule another recalibration.
++ */
++ hgpk_dbg(psmouse, "packet inside calibration window, "
++ "queueing another recalibration\n");
++ queue_delayed_work(kpsmoused_wq, &priv->recalib_wq,
++ msecs_to_jiffies(1000));
++ }
++ priv->recalib_window = 0;
++ }
++
++ if (psmouse->model != HGPK_MODEL_A) {
++ if (priv->pending_mode && (!pkt.mode_switch ||
++ priv->current_mode == pkt.mode_switch)) {
++ priv->pending_mode = 0;
++ cancel_delayed_work(&priv->switch_wq);
++ }
++ else if (priv->pending_mode != pkt.mode_switch) {
++ priv->pending_mode = pkt.mode_switch;
++
++ /* allow for spurious mode_switch packets by delaying */
++ queue_delayed_work(kpsmoused_wq, &priv->switch_wq,
++ msecs_to_jiffies(50));
++ }
++ }
++}
++
++static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
++{
++ if (hgpk_validate_byte(psmouse->packet, psmouse->pktcnt)) {
++ hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x %02x %02x %02x\n",
++ __func__, psmouse->pktcnt, psmouse->packet[0],
++ psmouse->packet[1], psmouse->packet[2],
++ psmouse->packet[3], psmouse->packet[4],
++ psmouse->packet[5]);
++ return PSMOUSE_BAD_DATA;
++ }
++
++ if (psmouse->pktcnt == 6) {
++ hgpk_process_packet_gspt(psmouse);
++ return PSMOUSE_FULL_PACKET;
++ }
++
++ return PSMOUSE_GOOD_DATA;
++}
++
++static int hgpk_force_recalibrate(struct psmouse *psmouse)
++{
++ struct ps2dev *ps2dev = &psmouse->ps2dev;
++ struct hgpk_data *priv = psmouse->private;
++ struct input_dev *pt = psmouse->dev;
++ struct input_dev *gs = priv->gs;
++
++ /* C-series touchpads added the recalibrate command */
++ if (psmouse->model < HGPK_MODEL_C)
++ return 0;
++
++ if (ps2_command(ps2dev, NULL, 0xf5) ||
++ ps2_command(ps2dev, NULL, 0xf5) ||
++ ps2_command(ps2dev, NULL, 0xe6) ||
++ ps2_command(ps2dev, NULL, 0xf5))
++ return -1;
++
++ /* send a finger-up event so the cursor doesn't jump around */
++ input_report_key(pt, BTN_TOUCH, 0);
++ input_report_key(gs, BTN_TOUCH, 0);
++ input_sync(pt);
++ input_sync(gs);
++
++ /* according to ALPS, 150mS is required for recalibration */
++ msleep(150);
++
++ /*
++ * XXX: If a finger is down during this delay, recalibration will
++ * detect capacitance incorrectly. This is a hardware bug, and
++ * we may need to work around that here.
++ */
++
++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
++ return -1;
++
++ /*
++ * After we recalibrate, we shouldn't get any packets for 2s. If
++ * we do, it's likely that someone's finger was on the touchpad.
++ * If someone's finger *was* on the touchpad, it's probably
++ * miscalibrated. So, we should schedule another recalibration
++ */
++ priv->recalib_window = jiffies + msecs_to_jiffies(2000);
++
++ return 0;
++}
++
++static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse)
++{
++ struct ps2dev *ps2dev = &psmouse->ps2dev;
++ unsigned char param[3];
++
++ /* E7, E7, E7, E9 gets us a 3 byte identifier */
++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
++ ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
++ return -EIO;
++
++ hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]);
++
++ /* HGPK signature: 0x67, 0x00, 0x<model> */
++ if (param[0] != 0x67 || param[1] != 0x00)
++ return -ENODEV;
++
++ hgpk_info(psmouse, "OLPC touchpad revision 0x%x\n", param[2]);
++ return param[2];
++}
++
++/*
++ * Touchpad should be disabled before calling this!
++ */
++static int hgpk_new_mode(struct psmouse *psmouse, int mode)
++{
++ struct ps2dev *ps2dev = &psmouse->ps2dev;
++ struct hgpk_data *priv = psmouse->private;
++
++ /*
++ * PT mode: F2, F2, F2, E7
++ * GS mode: F2, F2, F2, E6
++ */
++ if (ps2_command(ps2dev, NULL, 0xF2) ||
++ ps2_command(ps2dev, NULL, 0xF2) ||
++ ps2_command(ps2dev, NULL, 0xF2))
++ return -EIO;
++
++ if (mode == HGPK_GS) {
++ if (ps2_command(ps2dev, NULL, 0xE6))
++ return -EIO;
++ } else {
++ if (ps2_command(ps2dev, NULL, 0xE7))
++ return -EIO;
++ }
++
++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
++ return -EIO;
++
++ /* tell the irq handler to stop ignoring packets */
++ psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
++
++ priv->current_mode = mode;
++ priv->pending_mode = 0;
++ if (tpdebug)
++ hgpk_warn(psmouse, "Switched to mode 0x%x successful.\n", mode);
++
++ return 0;
++}
++
++static int hgpk_advanced_mode(struct psmouse *psmouse)
++{
++ struct ps2dev *ps2dev = &psmouse->ps2dev;
++
++ /* Switch to 'Advanced mode.', four disables in a row. */
++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
++ ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
++ return -1;
++
++ return hgpk_new_mode(psmouse, HGPK_GS);
++}
++
++/*
++ * This kills power to the touchpad; according to ALPS, current consumption
++ * goes down to 50uA after running this. To turn power back on, we drive
++ * MS-DAT low.
++ */
++static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
++{
++ struct ps2dev *ps2dev = &psmouse->ps2dev;
++ int timeo;
++
++ /* Added on D-series touchpads */
++ if (psmouse->model < HGPK_MODEL_D)
++ return 0;
++
++ if (enable) {
++ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
++
++ /*
++ * Sending a byte will drive MS-DAT low; this will wake up
++ * the controller. Once we get an ACK back from it, it
++ * means we can continue with the touchpad re-init. ALPS
++ * tells us that 1s should be long enough, so set that as
++ * the upper bound.
++ */
++ for (timeo = 20; timeo > 0; timeo--) {
++ if (!ps2_sendbyte(&psmouse->ps2dev,
++ PSMOUSE_CMD_DISABLE, 20))
++ break;
++ msleep(50);
++ }
++
++ psmouse_reset(psmouse);
++
++ if (hgpk_advanced_mode(psmouse)) {
++ hgpk_err(psmouse, "Failed to reinit touchpad!\n");
++ return -1;
++ }
++ } else {
++ hgpk_dbg(psmouse, "Powering off touchpad.\n");
++ psmouse_set_state(psmouse, PSMOUSE_IGNORE);
++
++ if (ps2_command(ps2dev, NULL, 0xec) ||
++ ps2_command(ps2dev, NULL, 0xec) ||
++ ps2_command(ps2dev, NULL, 0xea))
++ return -1;
++ /* probably won't see an ACK, the touchpad will be off */
++ ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
++ }
++
++ return 0;
++}
++
++/*
++ * poll the touchpad for current motion packet.
++ * Used in resync.
++ * Note: We can't poll, so always return failure.
++ */
++static int hgpk_poll(struct psmouse *psmouse)
++{
++ return -1;
++}
++
++static int hgpk_reconnect(struct psmouse *psmouse)
++{
++ if (olpc_board_at_least(olpc_board(0xb2)))
++ if (psmouse->ps2dev.serio->dev.power.power_state.event != PM_EVENT_ON)
++ return 0;
++
++ psmouse_reset(psmouse);
++
++ if (hgpk_advanced_mode(psmouse)) {
++ hgpk_err(psmouse, "failed to reenable advanced mode.\n");
++ return -1;
++ }
++
++ return 0;
++}
++
++static ssize_t hgpk_show_powered(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct serio *serio = to_serio_port(dev);
++ struct psmouse *psmouse;
++ struct hgpk_data *priv;
++ int retval;
++
++ retval = serio_pin_driver(serio);
++ if (retval)
++ return retval;
++
++ psmouse = serio_get_drvdata(serio);
++ priv = psmouse->private;
++
++ retval = sprintf(buf, "%d\n", priv->powered);
++ serio_unpin_driver(serio);
++ return retval;
++}
++
++static ssize_t hgpk_set_powered(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ struct serio *serio = to_serio_port(dev);
++ struct psmouse *psmouse;
++ struct hgpk_data *priv;
++ unsigned long val;
++ int retval;
++
++ if (*buf == '1')
++ val = 1;
++ else if (*buf == '0')
++ val = 0;
++ else
++ return -EINVAL;
++
++ retval = serio_pin_driver(serio);
++ if (retval)
++ return retval;
++
++/*
++ * FUCK IT. I don't fucking care. locking in psmouse is fucking retarded!
++ retval = mutex_lock_interruptible(&psmouse_mutex);
++ if (retval)
++ goto out_unpin;
++*/
++
++ psmouse = serio_get_drvdata(serio);
++ priv = psmouse->private;
++
++ if (val == priv->powered)
++ goto done;
++
++ retval = hgpk_toggle_power(psmouse, val);
++ if (!retval)
++ priv->powered = val;
++
++done:
++ serio_unpin_driver(serio);
++ return retval ? retval : count;
++}
++
++static DEVICE_ATTR(powered, S_IWUSR | S_IRUGO, hgpk_show_powered,
++ hgpk_set_powered);
++
++static void hgpk_disconnect(struct psmouse *psmouse)
++{
++ struct hgpk_data *priv = psmouse->private;
++
++ device_remove_file(&psmouse->ps2dev.serio->dev, &dev_attr_powered);
++ psmouse_reset(psmouse);
++ flush_scheduled_work();
++ input_unregister_device(priv->gs);
++ kfree(priv);
++}
++
++static void hgpk_mode_switch(struct work_struct *work)
++{
++ struct delayed_work *w = container_of(work, struct delayed_work, work);
++ struct hgpk_data *priv = container_of(w, struct hgpk_data, switch_wq);
++ struct psmouse *psmouse = priv->psmouse;
++ struct ps2dev *ps2dev = &psmouse->ps2dev;
++ int pending_mode;
++
++ if (tpdebug)
++ hgpk_dbg(psmouse, "Starting mode switch to 0x%x. [%lu]\n",
++ priv->pending_mode, jiffies);
++
++ if (priv->pending_mode == priv->current_mode) {
++ priv->pending_mode = 0;
++ hgpk_dbg(psmouse, "Already in target mode, no-op.\n");
++ return;
++ }
++
++ /* tell the irq handler to ignore any further packets */
++ psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
++ priv->late = 0;
++
++ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
++ goto bad;
++
++ /*
++ * ALPS tells us that it may take up to 20msec for the disable to
++ * take effect; however, ps2_command() will wait up to 200msec for
++ * the ACK to come back (and I'm assuming that by the time the
++ * hardware sends back its ACK, it has stopped sending bytes).
++ */
++ pending_mode = priv->pending_mode;
++
++ if (hgpk_new_mode(psmouse, priv->pending_mode))
++ goto bad;
++
++ /*
++ * Deal with a potential race condition.
++ *
++ * If there is a brief tap of a stylus or a fingernail that
++ * triggers a mode switch to PT mode, and the stylus/fingernail is
++ * lifted after the DISABLE above, but before we reenable in the
++ * new mode then we can get stuck in PT mode.
++ */
++ if (pending_mode == HGPK_PT) {
++ priv->pending_mode = HGPK_GS;
++ queue_delayed_work(kpsmoused_wq, &priv->switch_wq,
++ msecs_to_jiffies(50));
++ }
++
++ return;
++bad:
++ hgpk_warn(psmouse, "Failure to switch modes, resetting device...\n");
++ hgpk_reconnect(psmouse);
++}
++
++static void hgpk_recalib_work(struct work_struct *work)
++{
++ struct delayed_work *w = container_of(work, struct delayed_work, work);
++ struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
++ struct psmouse *psmouse = priv->psmouse;
++
++ if (tpdebug)
++ hgpk_dbg(psmouse, "Recalibrating touchpad..\n");
++
++ if (hgpk_force_recalibrate(psmouse))
++ hgpk_err(psmouse, "Recalibration failed!\n");
++}
++
++int olpc_init(struct psmouse *psmouse)
++{
++ struct hgpk_data *priv;
++ struct input_dev *pt = psmouse->dev;
++ struct input_dev *gs;
++
++ priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL);
++ gs = input_allocate_device();
++ if (!priv || !gs)
++ goto init_fail;
++
++ psmouse->private = priv;
++ priv->gs = gs;
++ priv->psmouse = psmouse;
++ priv->powered = 1;
++
++ psmouse_reset(psmouse);
++
++ if (hgpk_advanced_mode(psmouse)) {
++ hgpk_err(psmouse, "failed to enable advanced mode\n");
++ goto init_fail;
++ }
++
++ /* Unset things that psmouse-base sets that we don't have */
++ pt->evbit[0] &= ~BIT(EV_REL);
++ pt->keybit[LONG(BTN_MOUSE)] &= ~BIT(BTN_MIDDLE);
++ pt->relbit[0] &= ~(BIT(REL_X) | BIT(REL_Y));
++
++ /* Set all the things we *do* have */
++ set_bit(EV_KEY, pt->evbit);
++ set_bit(EV_ABS, pt->evbit);
++
++ set_bit(BTN_LEFT, pt->keybit);
++ set_bit(BTN_RIGHT, pt->keybit);
++ set_bit(BTN_TOUCH, pt->keybit);
++
++ input_set_abs_params(pt, ABS_X, 2, 1000, 0, 0);
++ input_set_abs_params(pt, ABS_Y, 0, 717, 0, 0);
++ input_set_abs_params(pt, ABS_PRESSURE, 0, 127, 0, 0);
++
++ snprintf(priv->phys, sizeof(priv->phys),
++ "%s/input1", psmouse->ps2dev.serio->phys);
++ gs->phys = priv->phys;
++ gs->name = "OLPC ALPS GlideSensor";
++ gs->id.bustype = BUS_I8042;
++ gs->id.vendor = 0x0002;
++ gs->id.product = PSMOUSE_OLPC;
++ gs->id.version = psmouse->model;
++
++ set_bit(EV_KEY, gs->evbit);
++ set_bit(EV_ABS, gs->evbit);
++
++ set_bit(BTN_LEFT, gs->keybit);
++ set_bit(BTN_RIGHT, gs->keybit);
++ set_bit(BTN_TOUCH, gs->keybit);
++
++ input_set_abs_params(gs, ABS_X, 350, 512, 0, 0);
++ input_set_abs_params(gs, ABS_Y, 70, 325, 0, 0);
++ input_set_abs_params(gs, ABS_PRESSURE, 0, 15, 0, 0);
++
++ if (input_register_device(gs)) {
++ hgpk_err(psmouse, "Failed to register GlideSensor\n");
++ goto init_fail;
++ }
++
++ psmouse->protocol_handler = hgpk_process_byte;
++ psmouse->poll = hgpk_poll;
++ psmouse->disconnect = hgpk_disconnect;
++ psmouse->reconnect = hgpk_reconnect;
++ psmouse->pktsize = 6;
++
++ /* Disable the idle resync. */
++ psmouse->resync_time = 0;
++ /* Reset after a lot of bad bytes. */
++ psmouse->resetafter = 1024;
++
++ INIT_DELAYED_WORK(&priv->switch_wq, hgpk_mode_switch);
++ INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
++
++ if (device_create_file(&psmouse->ps2dev.serio->dev,
++ &dev_attr_powered)) {
++ hgpk_err(psmouse, "Failed to create sysfs attribute\n");
++ goto attr_fail;
++ }
++
++
++ return 0;
++
++attr_fail:
++ input_unregister_device(gs);
++ gs = NULL;
++init_fail:
++ input_free_device(gs);
++ kfree(priv);
++ return -1;
++}
++
++int olpc_detect(struct psmouse *psmouse, int set_properties)
++{
++ int version;
++
++ version = hgpk_get_model(psmouse);
++ if (version < 0)
++ return version;
++
++ if (set_properties) {
++ psmouse->vendor = "ALPS";
++ psmouse->name = "PenTablet";
++ psmouse->model = version;
++ }
++ return 0;
++}
+diff -purN linux_2.6.24_org/drivers/input/mouse/olpc.h linux_2.6.24_olpc/drivers/input/mouse/olpc.h
+--- linux_2.6.24_org/drivers/input/mouse/olpc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/input/mouse/olpc.h 2008-02-15 18:59:14.000000000 +0000
+@@ -0,0 +1,78 @@
++/*
++ * OLPC touchpad PS/2 mouse driver
++ *
++ * Copyright (c) 2006 One Laptop Per Child, inc.
++ *
++ * This driver is partly based on the ALPS driver.
++ * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
++ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ */
++
++#ifndef _OLPC_H
++#define _OLPC_H
++
++enum hgpk_model_t {
++ HGPK_MODEL_PreA = 0x0a, /* pre-B1s */
++ HGPK_MODEL_A = 0x14, /* found on B1s, PT disabled in hardware */
++ HGPK_MODEL_B = 0x28, /* B2s, has capacitance issues */
++ HGPK_MODEL_C = 0x3c,
++ HGPK_MODEL_D = 0x50, /* C1, mass production */
++};
++
++#define HGPK_GS 0xff /* The GlideSensor */
++#define HGPK_PT 0xcf /* The PenTablet */
++
++struct hgpk_packet {
++ struct input_dev *dev;
++ int x, y, z;
++ unsigned char mode_switch;
++ unsigned int pt_down:1, gs_down:1;
++ unsigned int left:1, right:1;
++};
++
++struct hgpk_data {
++ struct input_dev *gs; /* GlideSensor */
++ struct psmouse *psmouse;
++ char name[32]; /* Name */
++ char phys[32]; /* Phys */
++ int pending_mode;
++ int current_mode;
++ s64 late;
++ int axis_errors;
++ int repeat_pkts;
++ int powered;
++ unsigned long recalib_window;
++ struct delayed_work switch_wq;
++ struct delayed_work recalib_wq;
++};
++
++#define hgpk_dbg(psmouse, format, arg...) \
++ dev_dbg(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_err(psmouse, format, arg...) \
++ dev_err(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_info(psmouse, format, arg...) \
++ dev_info(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_warn(psmouse, format, arg...) \
++ dev_warn(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++#define hgpk_notice(psmouse, format, arg...) \
++ dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
++
++#ifdef CONFIG_MOUSE_PS2_OLPC
++int olpc_detect(struct psmouse *psmouse, int set_properties);
++int olpc_init(struct psmouse *psmouse);
++#else
++inline int olpc_detect(struct psmouse *psmouse, int set_properties)
++{
++ return -ENOSYS;
++}
++inline int olpc_init(struct psmouse *psmouse)
++{
++ return -ENOSYS;
++}
++#endif
++
++#endif
+diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse-base.c linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c
+--- linux_2.6.24_org/drivers/input/mouse/psmouse-base.c 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/psmouse-base.c 2008-02-15 18:59:14.000000000 +0000
+@@ -26,6 +26,7 @@
+ #include "synaptics.h"
+ #include "logips2pp.h"
+ #include "alps.h"
++#include "olpc.h"
+ #include "lifebook.h"
+ #include "trackpoint.h"
+ #include "touchkit_ps2.h"
+@@ -103,7 +104,7 @@ static struct attribute_group psmouse_at
+ */
+ static DEFINE_MUTEX(psmouse_mutex);
+
+-static struct workqueue_struct *kpsmoused_wq;
++struct workqueue_struct *kpsmoused_wq;
+
+ struct psmouse_protocol {
+ enum psmouse_type type;
+@@ -221,7 +222,7 @@ static inline void __psmouse_set_state(s
+ * is not a concern.
+ */
+
+-static void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
++void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state)
+ {
+ serio_pause_rx(psmouse->ps2dev.serio);
+ __psmouse_set_state(psmouse, new_state);
+@@ -320,7 +321,7 @@ static irqreturn_t psmouse_interrupt(str
+ goto out;
+ }
+
+- if (psmouse->packet[1] == PSMOUSE_RET_ID) {
++ if (psmouse->packet[1] == PSMOUSE_RET_ID || psmouse->packet[1] == PSMOUSE_RET_BAT) {
+ __psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+ serio_reconnect(serio);
+ goto out;
+@@ -631,8 +632,21 @@ static int psmouse_extensions(struct psm
+ }
+ }
+
++/*
++ * Try OLPC touchpad.
++ */
+ if (max_proto > PSMOUSE_IMEX) {
++ if (olpc_detect(psmouse, set_properties) == 0) {
++ if (!set_properties || olpc_init(psmouse) == 0)
++ return PSMOUSE_OLPC;
++/*
++ * Init failed, try basic relative protocols
++ */
++ max_proto = PSMOUSE_IMEX;
++ }
++ }
+
++ if (max_proto > PSMOUSE_IMEX) {
+ if (genius_detect(psmouse, set_properties) == 0)
+ return PSMOUSE_GENPS;
+
+@@ -763,6 +777,14 @@ static const struct psmouse_protocol psm
+ .detect = touchkit_ps2_detect,
+ },
+ #endif
++#ifdef CONFIG_MOUSE_PS2_OLPC
++ {
++ .type = PSMOUSE_OLPC,
++ .name = "OLPC",
++ .alias = "olpc",
++ .detect = olpc_detect,
++ },
++#endif
+ {
+ .type = PSMOUSE_CORTRON,
+ .name = "CortronPS/2",
+diff -purN linux_2.6.24_org/drivers/input/mouse/psmouse.h linux_2.6.24_olpc/drivers/input/mouse/psmouse.h
+--- linux_2.6.24_org/drivers/input/mouse/psmouse.h 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/mouse/psmouse.h 2008-02-15 18:59:14.000000000 +0000
+@@ -88,6 +88,7 @@ enum psmouse_type {
+ PSMOUSE_LIFEBOOK,
+ PSMOUSE_TRACKPOINT,
+ PSMOUSE_TOUCHKIT_PS2,
++ PSMOUSE_OLPC,
+ PSMOUSE_CORTRON,
+ PSMOUSE_AUTO /* This one should always be last */
+ };
+@@ -95,7 +96,9 @@ enum psmouse_type {
+ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
+ int psmouse_reset(struct psmouse *psmouse);
+ void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
++void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state);
+
++extern struct workqueue_struct *kpsmoused_wq;
+
+ struct psmouse_attribute {
+ struct device_attribute dattr;
+diff -purN linux_2.6.24_org/drivers/input/serio/i8042.c linux_2.6.24_olpc/drivers/input/serio/i8042.c
+--- linux_2.6.24_org/drivers/input/serio/i8042.c 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/serio/i8042.c 2008-02-15 18:59:14.000000000 +0000
+@@ -874,6 +874,11 @@ static long i8042_panic_blink(long count
+ #undef DELAY
+
+ #ifdef CONFIG_PM
++
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ /*
+ * Here we try to restore the original BIOS settings. We only want to
+ * do that once, when we really suspend, not when we taking memory
+@@ -884,8 +889,15 @@ static long i8042_panic_blink(long count
+ static int i8042_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ if (dev->dev.power.power_state.event != state.event) {
++#ifdef CONFIG_OLPC
++ /* Anything newer than B2 remains powered; no reset needed */
++ if (!olpc_board_at_least(olpc_board_pre(0xb3))) {
++#endif
+ if (state.event == PM_EVENT_SUSPEND)
+ i8042_controller_reset();
++#ifdef CONFIG_OLPC
++ }
++#endif
+
+ dev->dev.power.power_state = state;
+ }
+@@ -908,9 +920,15 @@ static int i8042_resume(struct platform_
+ if (dev->dev.power.power_state.event == PM_EVENT_ON)
+ return 0;
+
++#ifdef CONFIG_OLPC
++ if (!olpc_board_at_least(olpc_board_pre(0xb3))) {
++#endif
+ error = i8042_controller_check();
+ if (error)
+ return error;
++#ifdef CONFIG_OLPC
++ }
++#endif
+
+ error = i8042_controller_selftest();
+ if (error)
+diff -purN linux_2.6.24_org/drivers/input/serio/serio.c linux_2.6.24_olpc/drivers/input/serio/serio.c
+--- linux_2.6.24_org/drivers/input/serio/serio.c 2008-02-15 20:11:51.000000000 +0000
++++ linux_2.6.24_olpc/drivers/input/serio/serio.c 2008-02-15 18:59:14.000000000 +0000
+@@ -910,11 +910,22 @@ static int serio_uevent(struct device *d
+ #endif /* CONFIG_HOTPLUG */
+
+ #ifdef CONFIG_PM
++
++#ifdef CONFIG_OLPC
++#include <asm/olpc.h>
++#endif
++
+ static int serio_suspend(struct device *dev, pm_message_t state)
+ {
+ if (dev->power.power_state.event != state.event) {
++#ifdef CONFIG_OLPC
++ if (!olpc_board_at_least(olpc_board_pre(0xb3))) {
++#endif
+ if (state.event == PM_EVENT_SUSPEND)
+ serio_cleanup(to_serio_port(dev));
++#ifdef CONFIG_OLPC
++ }
++#endif
+
+ dev->power.power_state = state;
+ }
+diff -purN linux_2.6.24_org/drivers/Kconfig linux_2.6.24_olpc/drivers/Kconfig
+--- linux_2.6.24_org/drivers/Kconfig 2008-02-15 20:11:21.000000000 +0000
++++ linux_2.6.24_olpc/drivers/Kconfig 2008-02-15 18:58:34.000000000 +0000
+@@ -94,6 +94,8 @@ source "drivers/auxdisplay/Kconfig"
+
+ source "drivers/kvm/Kconfig"
+
++source "drivers/sysprof/Kconfig"
++
+ source "drivers/uio/Kconfig"
+
+ source "drivers/virtio/Kconfig"
+diff -purN linux_2.6.24_org/drivers/Makefile linux_2.6.24_olpc/drivers/Makefile
+--- linux_2.6.24_org/drivers/Makefile 2008-02-15 20:11:24.000000000 +0000
++++ linux_2.6.24_olpc/drivers/Makefile 2008-02-15 18:58:43.000000000 +0000
+@@ -23,6 +23,8 @@ obj-y += char/
+
+ obj-$(CONFIG_CONNECTOR) += connector/
+
++obj-$(CONFIG_SYSPROF) += sysprof/
++
+ # i810fb and intelfb depend on char/agp/
+ obj-$(CONFIG_FB_I810) += video/i810/
+ obj-$(CONFIG_FB_INTEL) += video/intelfb/
+diff -purN linux_2.6.24_org/drivers/media/video/cafe_ccic.c linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c
+--- linux_2.6.24_org/drivers/media/video/cafe_ccic.c 2008-02-15 20:11:25.000000000 +0000
++++ linux_2.6.24_olpc/drivers/media/video/cafe_ccic.c 2008-02-15 18:58:44.000000000 +0000
+@@ -372,6 +372,10 @@ static int cafe_smbus_write_data(struct
+ rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+ cafe_reg_write(cam, REG_TWSIC1, rval);
+ spin_unlock_irqrestore(&cam->dev_lock, flags);
++ mdelay(2); /* It'll probably take about 900µs anyway, and the
++ CAFÉ is apparently quite sensitive to being poked
++ at this point. If we can work out precisely what's
++ going on and reduce this delay, it would be nice. */
+
+ /*
+ * Time to wait for the write to complete. THIS IS A RACY
+@@ -907,8 +911,6 @@ static int cafe_cam_configure(struct caf
+ struct v4l2_format fmt;
+ int ret, zero = 0;
+
+- if (cam->state != S_IDLE)
+- return -EINVAL;
+ fmt.fmt.pix = cam->pix_format;
+ ret = __cafe_cam_cmd(cam, VIDIOC_INT_INIT, &zero);
+ if (ret == 0)
+@@ -2237,14 +2239,18 @@ static int cafe_pci_suspend(struct pci_d
+ int ret;
+ enum cafe_state cstate;
+
++ mutex_lock(&cam->s_mutex);
+ ret = pci_save_state(pdev);
+- if (ret)
++ if (ret) {
++ cam_warn(cam, "Unable to save PCI state\n");
+ return ret;
++ }
+ cstate = cam->state; /* HACK - stop_dma sets to idle */
+ cafe_ctlr_stop_dma(cam);
+ cafe_ctlr_power_down(cam);
+ pci_disable_device(pdev);
+ cam->state = cstate;
++ /* hold mutex until restore */
+ return 0;
+ }
+
+@@ -2263,16 +2269,18 @@ static int cafe_pci_resume(struct pci_de
+ cam_warn(cam, "Unable to re-enable device on resume!\n");
+ return ret;
+ }
++ /* we're still holding mutex from suspend */
+ cafe_ctlr_init(cam);
+ cafe_ctlr_power_down(cam);
+
+- mutex_lock(&cam->s_mutex);
+- if (cam->users > 0) {
+- cafe_ctlr_power_up(cam);
+- __cafe_cam_reset(cam);
+- }
+- mutex_unlock(&cam->s_mutex);
+-
++ if (cam->users > 0) {
++ cafe_ctlr_power_up(cam);
++ __cafe_cam_reset(cam);
++ }
++ else
++ cafe_ctlr_power_down(cam);
++ mutex_unlock(&cam->s_mutex);
++
+ set_bit(CF_CONFIG_NEEDED, &cam->flags);
+ if (cam->state == S_SPECREAD)
+ cam->state = S_IDLE; /* Don't bother restarting */
+diff -purN linux_2.6.24_org/drivers/misc/Kconfig linux_2.6.24_olpc/drivers/misc/Kconfig
+--- linux_2.6.24_org/drivers/misc/Kconfig 2008-02-15 20:11:42.000000000 +0000
++++ linux_2.6.24_olpc/drivers/misc/Kconfig 2008-02-15 18:58:52.000000000 +0000
+@@ -219,6 +219,11 @@ config THINKPAD_ACPI_BAY
+
+ If you are not sure, say Y here.
+
++config EEPROM_93CX6
++ tristate "EEPROM 93CX6 support"
++ ---help---
++ This is a driver for the EEPROM chipsets 93c46 and 93c66.
++ The driver supports both read as well as write commands.
+
+ config ATMEL_SSC
+ tristate "Device driver for Atmel SSC peripheral"
+diff -purN linux_2.6.24_org/drivers/mmc/card/block.c linux_2.6.24_olpc/drivers/mmc/card/block.c
+--- linux_2.6.24_org/drivers/mmc/card/block.c 2008-02-15 20:11:13.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mmc/card/block.c 2008-02-15 18:58:17.000000000 +0000
+@@ -237,6 +237,13 @@ static int mmc_blk_issue_rq(struct mmc_q
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
+
++ if (mmc_card_sd(card) && !card->host->ios.clock) {
++ printk(KERN_ERR "%s: I/O to stopped card\n",
++ req->rq_disk->disk_name);
++ goto cmd_err;
++ }
++ mmc_set_data_timeout(&brq.data, card);
++
+ /*
+ * If the host doesn't support multiple block writes, force
+ * block writes to single block. SD cards are excepted from
+diff -purN linux_2.6.24_org/drivers/mmc/host/sdhci.c linux_2.6.24_olpc/drivers/mmc/host/sdhci.c
+--- linux_2.6.24_org/drivers/mmc/host/sdhci.c 2008-02-15 20:11:13.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mmc/host/sdhci.c 2008-02-15 18:58:17.000000000 +0000
+@@ -441,6 +441,12 @@ static void sdhci_prepare_data(struct sd
+ break;
+ }
+
++ /*
++ * There's an off-by-one error in the hw that we need to
++ * compensate for.
++ */
++ count++;
++
+ if (count >= 0xF) {
+ printk(KERN_WARNING "%s: Too large timeout requested!\n",
+ mmc_hostname(host->mmc));
+@@ -728,19 +734,17 @@ static void sdhci_set_power(struct sdhci
+ if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
+
+- pwr = SDHCI_POWER_ON;
+-
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+- pwr |= SDHCI_POWER_180;
++ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+- pwr |= SDHCI_POWER_300;
++ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+- pwr |= SDHCI_POWER_330;
++ pwr = SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+@@ -748,6 +752,10 @@ static void sdhci_set_power(struct sdhci
+
+ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+
++ pwr |= SDHCI_POWER_ON;
++
++ writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
++
+ out:
+ host->power = power;
+ }
+diff -purN linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c
+--- linux_2.6.24_org/drivers/mtd/nand/cafe_nand.c 2008-02-15 20:11:46.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mtd/nand/cafe_nand.c 2008-02-15 18:58:57.000000000 +0000
+@@ -11,6 +11,7 @@
+ #undef DEBUG
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/rslib.h>
+ #include <linux/pci.h>
+ #include <linux/delay.h>
+@@ -52,6 +53,7 @@
+
+ struct cafe_priv {
+ struct nand_chip nand;
++ struct mtd_partition *parts;
+ struct pci_dev *pdev;
+ void __iomem *mmio;
+ struct rs_control *rs;
+@@ -84,6 +86,10 @@ static unsigned int numtimings;
+ static int timing[3];
+ module_param_array(timing, int, &numtimings, 0644);
+
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probes[] = { "RedBoot", NULL };
++#endif
++
+ /* Hrm. Why isn't this already conditional on something in the struct device? */
+ #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
+
+@@ -620,7 +626,9 @@ static int __devinit cafe_nand_probe(str
+ {
+ struct mtd_info *mtd;
+ struct cafe_priv *cafe;
++ struct mtd_partition *parts;
+ uint32_t ctrl;
++ int nr_parts;
+ int err = 0;
+
+ /* Very old versions shared the same PCI ident for all three
+@@ -787,7 +795,18 @@ static int __devinit cafe_nand_probe(str
+ goto out_irq;
+
+ pci_set_drvdata(pdev, mtd);
++
++ /* We register the whole device first, separate from the partitions */
+ add_mtd_device(mtd);
++
++#ifdef CONFIG_MTD_PARTITIONS
++ nr_parts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
++ if (nr_parts > 0) {
++ cafe->parts = parts;
++ dev_info(&cafe->pdev->dev, "%d RedBoot partitions found\n", nr_parts);
++ add_mtd_partitions(mtd, parts, nr_parts);
++ }
++#endif
+ goto out;
+
+ out_irq:
+diff -purN linux_2.6.24_org/drivers/mtd/redboot.c linux_2.6.24_olpc/drivers/mtd/redboot.c
+--- linux_2.6.24_org/drivers/mtd/redboot.c 2008-02-15 20:11:46.000000000 +0000
++++ linux_2.6.24_olpc/drivers/mtd/redboot.c 2008-02-15 18:58:58.000000000 +0000
+@@ -59,16 +59,31 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ if ( directory < 0 ) {
++ offset = master->size + directory * master->erasesize;
++ while (master->block_isbad &&
++ master->block_isbad(master, offset)) {
++ if (!offset) {
++ nogood:
++ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ return -EIO;
++ }
++ offset -= master->erasesize;
++ }
++ } else {
++ offset = directory * master->erasesize;
++ while (master->block_isbad &&
++ master->block_isbad(master, offset)) {
++ offset += master->erasesize;
++ if (offset == master->size)
++ goto nogood;
++ }
++ }
+ buf = vmalloc(master->erasesize);
+
+ if (!buf)
+ return -ENOMEM;
+
+- if ( directory < 0 )
+- offset = master->size + directory*master->erasesize;
+- else
+- offset = directory*master->erasesize;
+-
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+
+diff -purN linux_2.6.24_org/drivers/net/forcedeth.c linux_2.6.24_olpc/drivers/net/forcedeth.c
+--- linux_2.6.24_org/drivers/net/forcedeth.c 2008-02-15 20:11:19.000000000 +0000
++++ linux_2.6.24_olpc/drivers/net/forcedeth.c 2008-02-15 18:58:33.000000000 +0000
+@@ -3559,11 +3559,13 @@ static int nv_request_irq(struct net_dev
+ }
+ if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+ if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
++ pci_intx(np->pci_dev, 0);
+ np->msi_flags |= NV_MSI_ENABLED;
+ dev->irq = np->pci_dev->irq;
+ if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
+ printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+ pci_disable_msi(np->pci_dev);
++ pci_intx(np->pci_dev, 1);
+ np->msi_flags &= ~NV_MSI_ENABLED;
+ dev->irq = np->pci_dev->irq;
+ goto out_err;
+@@ -3606,6 +3608,7 @@ static void nv_free_irq(struct net_devic
+ free_irq(np->pci_dev->irq, dev);
+ if (np->msi_flags & NV_MSI_ENABLED) {
+ pci_disable_msi(np->pci_dev);
++ pci_intx(np->pci_dev, 1);
+ np->msi_flags &= ~NV_MSI_ENABLED;
+ }
+ }
+diff -purN linux_2.6.24_org/drivers/pci/quirks.c linux_2.6.24_olpc/drivers/pci/quirks.c
+--- linux_2.6.24_org/drivers/pci/quirks.c 2008-02-15 20:11:33.000000000 +0000
++++ linux_2.6.24_olpc/drivers/pci/quirks.c 2008-02-15 18:58:50.000000000 +0000
+@@ -1359,6 +1359,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
+
+ /*
++ * According to Tom Sylla, the Geode does not support PCI power management
++ * transition, so we shouldn't need the D3hot delay.
++ */
++static void __init quirk_geode_pci_pm(struct pci_dev *dev)
++{
++ pci_pm_d3_delay = 0;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, quirk_geode_pci_pm);
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_geode_pci_pm);
++
++/*
+ * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+ * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+ * Re-allocate the region if needed...
+diff -purN linux_2.6.24_org/drivers/power/ds2760_battery.c linux_2.6.24_olpc/drivers/power/ds2760_battery.c
+--- linux_2.6.24_org/drivers/power/ds2760_battery.c 2008-02-15 20:11:45.000000000 +0000
++++ linux_2.6.24_olpc/drivers/power/ds2760_battery.c 2008-02-15 18:58:56.000000000 +0000
+@@ -409,6 +409,7 @@ static int ds2760_battery_suspend(struct
+ struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
++ power_supply_changed(&di->bat);
+
+ return 0;
+ }
+diff -purN linux_2.6.24_org/drivers/power/olpc_battery.c linux_2.6.24_olpc/drivers/power/olpc_battery.c
+--- linux_2.6.24_org/drivers/power/olpc_battery.c 2008-02-15 20:11:45.000000000 +0000
++++ linux_2.6.24_olpc/drivers/power/olpc_battery.c 2008-02-15 18:58:56.000000000 +0000
+@@ -14,12 +14,13 @@
+ #include <linux/power_supply.h>
+ #include <linux/jiffies.h>
+ #include <linux/sched.h>
++#include <asm/io.h>
+ #include <asm/olpc.h>
+
+
+ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
+ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
+-#define EC_BAT_ACR 0x12
++#define EC_BAT_ACR 0x12 /* int16_t *416.667 µAh */
+ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */
+ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */
+ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */
+@@ -84,6 +85,8 @@ static struct power_supply olpc_ac = {
+ .get_property = olpc_ac_get_prop,
+ };
+
++static char bat_serial[17]; /* Ick */
++
+ /*********************************************************************
+ * Battery properties
+ *********************************************************************/
+@@ -94,6 +97,7 @@ static int olpc_bat_get_property(struct
+ int ret = 0;
+ int16_t ec_word;
+ uint8_t ec_byte;
++ uint64_t ser_buf;
+
+ ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
+ if (ret)
+@@ -127,8 +131,8 @@ static int olpc_bat_get_property(struct
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* Not _necessarily_ true but EC doesn't tell all yet */
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+- break;
+ }
++ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+ break;
+@@ -249,6 +253,22 @@ static int olpc_bat_get_property(struct
+ ec_word = be16_to_cpu(ec_word);
+ val->intval = ec_word * 100 / 256;
+ break;
++ case POWER_SUPPLY_PROP_ACCUM_CURRENT:
++ ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
++ if (ret)
++ return ret;
++
++ ec_word = be16_to_cpu(ec_word);
++ val->intval = (uint16_t)ec_word;
++ break;
++ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
++ ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
++ if (ret)
++ return ret;
++
++ sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
++ val->strval = bat_serial;
++ break;
+ default:
+ ret = -EINVAL;
+ break;
+@@ -268,7 +288,51 @@ static enum power_supply_property olpc_b
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TEMP_AMBIENT,
++ POWER_SUPPLY_PROP_ACCUM_CURRENT,
+ POWER_SUPPLY_PROP_MANUFACTURER,
++ POWER_SUPPLY_PROP_SERIAL_NUMBER,
++};
++
++/* EEPROM reading goes completely around the power_supply API, sadly */
++
++#define EEPROM_START 0x20
++#define EEPROM_END 0x80
++#define EEPROM_SIZE (EEPROM_END - EEPROM_START)
++
++static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, char *buf, loff_t off,
++ size_t count)
++{
++ uint8_t ec_byte;
++ int ret, end;
++
++ if (off >= EEPROM_SIZE)
++ return 0;
++ if (off + count > EEPROM_SIZE)
++ count = EEPROM_SIZE - off;
++
++ end = EEPROM_START + off + count;
++ for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
++ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
++ &buf[ec_byte - EEPROM_START], 1);
++ if (ret) {
++ printk(KERN_ERR "olpc-battery: EC command "
++ "EC_BAT_EEPROM @ 0x%x failed -"
++ " %d!\n", ec_byte, ret);
++ return -EIO;
++ }
++ }
++
++ return count;
++}
++
++static struct bin_attribute olpc_bat_eeprom = {
++ .attr = {
++ .name = "eeprom",
++ .mode = S_IRUGO,
++ .owner = THIS_MODULE,
++ },
++ .size = 0,
++ .read = olpc_bat_eeprom_read,
+ };
+
+ /*********************************************************************
+@@ -299,7 +363,7 @@ static int __init olpc_bat_init(void)
+
+ if (!olpc_platform_info.ecver)
+ return -ENXIO;
+- if (olpc_platform_info.ecver < 0x43) {
++ if (olpc_platform_info.ecver < 0x44) {
+ printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+ return -ENXIO;
+ }
+@@ -324,9 +388,15 @@ static int __init olpc_bat_init(void)
+ if (ret)
+ goto battery_failed;
+
++ ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
++ if (ret)
++ goto eeprom_failed;
++
+ olpc_register_battery_callback(&olpc_battery_trigger_uevent);
+ goto success;
+
++eeprom_failed:
++ power_supply_unregister(&olpc_bat);
+ battery_failed:
+ power_supply_unregister(&olpc_ac);
+ ac_failed:
+@@ -338,6 +408,7 @@ success:
+ static void __exit olpc_bat_exit(void)
+ {
+ olpc_deregister_battery_callback();
++ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+ power_supply_unregister(&olpc_bat);
+ power_supply_unregister(&olpc_ac);
+ platform_device_unregister(bat_pdev);
+diff -purN linux_2.6.24_org/drivers/power/power_supply_sysfs.c linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c
+--- linux_2.6.24_org/drivers/power/power_supply_sysfs.c 2008-02-15 20:11:45.000000000 +0000
++++ linux_2.6.24_olpc/drivers/power/power_supply_sysfs.c 2008-02-15 18:58:56.000000000 +0000
+@@ -114,9 +114,11 @@ static struct device_attribute power_sup
+ POWER_SUPPLY_ATTR(time_to_empty_avg),
+ POWER_SUPPLY_ATTR(time_to_full_now),
+ POWER_SUPPLY_ATTR(time_to_full_avg),
++ POWER_SUPPLY_ATTR(accum_current),
+ /* Properties of type `const char *' */
+ POWER_SUPPLY_ATTR(model_name),
+ POWER_SUPPLY_ATTR(manufacturer),
++ POWER_SUPPLY_ATTR(serial_number),
+ };
+
+ static ssize_t power_supply_show_static_attrs(struct device *dev,
+diff -purN linux_2.6.24_org/drivers/serial/serial_core.c linux_2.6.24_olpc/drivers/serial/serial_core.c
+--- linux_2.6.24_org/drivers/serial/serial_core.c 2008-02-15 20:11:33.000000000 +0000
++++ linux_2.6.24_olpc/drivers/serial/serial_core.c 2008-02-15 18:58:51.000000000 +0000
+@@ -2013,6 +2013,7 @@ int uart_suspend_port(struct uart_driver
+ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+ {
+ struct uart_state *state = drv->state + port->line;
++ struct ktermios termios;
+
+ mutex_lock(&state->mutex);
+
+@@ -2035,20 +2036,6 @@ int uart_resume_port(struct uart_driver
+ * Re-enable the console device after suspending.
+ */
+ if (uart_console(port)) {
+- struct ktermios termios;
+-
+- /*
+- * First try to use the console cflag setting.
+- */
+- memset(&termios, 0, sizeof(struct ktermios));
+- termios.c_cflag = port->cons->cflag;
+-
+- /*
+- * If that's unset, use the tty termios setting.
+- */
+- if (state->info && state->info->tty && termios.c_cflag == 0)
+- termios = *state->info->tty->termios;
+-
+ port->ops->set_termios(port, &termios, NULL);
+ console_start(port->cons);
+ }
+diff -purN linux_2.6.24_org/drivers/sysprof/config.h linux_2.6.24_olpc/drivers/sysprof/config.h
+--- linux_2.6.24_org/drivers/sysprof/config.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/config.h 2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,23 @@
++/* config.h. Generated by configure. */
++/* config.h.in. Generated from configure.ac by autoheader. */
++
++/* Look for global separate debug info in this path */
++#define DEBUGDIR "/usr/local/lib/debug"
++
++/* Define to 1 if you have the `iberty' library (-liberty). */
++/* #undef HAVE_LIBIBERTY */
++
++/* Define to the address where bug reports for this package should be sent. */
++#define PACKAGE_BUGREPORT ""
++
++/* Define to the full name of this package. */
++#define PACKAGE_NAME "sysprof"
++
++/* Define to the full name and version of this package. */
++#define PACKAGE_STRING "sysprof 1.0.8"
++
++/* Define to the one symbol short name of this package. */
++#define PACKAGE_TARNAME "sysprof"
++
++/* Define to the version of this package. */
++#define PACKAGE_VERSION "1.0.8"
+diff -purN linux_2.6.24_org/drivers/sysprof/Kconfig linux_2.6.24_olpc/drivers/sysprof/Kconfig
+--- linux_2.6.24_org/drivers/sysprof/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/Kconfig 2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,12 @@
++
++menu "Sysprof"
++
++config SYSPROF
++ tristate "Sysprof support"
++ help
++ Say M here to include the sysprof-module.
++
++ Sysprof is a sampling profiler that uses a kernel module,
++ sysprof-module, to generate stacktraces which are then interpreted by
++ the userspace program "sysprof".
++endmenu
+diff -purN linux_2.6.24_org/drivers/sysprof/Makefile linux_2.6.24_olpc/drivers/sysprof/Makefile
+--- linux_2.6.24_org/drivers/sysprof/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/Makefile 2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1 @@
++obj-$(CONFIG_SYSPROF) += sysprof-module.o
+diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.c linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c
+--- linux_2.6.24_org/drivers/sysprof/sysprof-module.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.c 2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,271 @@
++/* -*- c-basic-offset: 8 -*- */
++
++/* Sysprof -- Sampling, systemwide CPU profiler
++ * Copyright 2004, Red Hat, Inc.
++ * Copyright 2004, 2005, Soeren Sandmann
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifdef CONFIG_SMP
++# define __SMP__
++#endif
++#include <asm/atomic.h>
++#include <linux/kernel.h> /* Needed for KERN_ALERT */
++#include <linux/module.h> /* Needed by all modules */
++#include <linux/sched.h>
++
++#include <linux/proc_fs.h>
++#include <asm/uaccess.h>
++#include <linux/poll.h>
++#include <linux/highmem.h>
++#include <linux/pagemap.h>
++#include <linux/profile.h>
++
++#include "sysprof-module.h"
++
++#include "config.h"
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#include <linux/config.h>
++#endif
++
++#if !CONFIG_PROFILING
++# error Sysprof needs a kernel with profiling support compiled in.
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
++# error Sysprof needs a Linux 2.6.11 kernel or later
++#endif
++#include <linux/kallsyms.h>
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Soeren Sandmann (sandmann@daimi.au.dk)");
++
++#define SAMPLES_PER_SECOND (200)
++#define INTERVAL ((HZ <= SAMPLES_PER_SECOND)? 1 : (HZ / SAMPLES_PER_SECOND))
++#define N_TRACES 256
++
++static SysprofStackTrace stack_traces[N_TRACES];
++static SysprofStackTrace * head = &stack_traces[0];
++static SysprofStackTrace * tail = &stack_traces[0];
++DECLARE_WAIT_QUEUE_HEAD (wait_for_trace);
++DECLARE_WAIT_QUEUE_HEAD (wait_for_exit);
++
++/* Macro the names of the registers that are used on each architecture */
++#if defined(CONFIG_X86_64)
++# define REG_FRAME_PTR rbp
++# define REG_INS_PTR rip
++# define REG_STACK_PTR rsp
++#elif defined(CONFIG_X86)
++# define REG_FRAME_PTR ebp
++# define REG_INS_PTR eip
++# define REG_STACK_PTR esp
++#else
++# error Sysprof only supports the i386 and x86-64 architectures
++#endif
++
++typedef struct userspace_reader userspace_reader;
++struct userspace_reader
++{
++ struct task_struct *task;
++ unsigned long cache_address;
++ unsigned long *cache;
++};
++
++typedef struct StackFrame StackFrame;
++struct StackFrame {
++ unsigned long next;
++ unsigned long return_address;
++};
++
++struct work_struct work;
++
++static int
++read_frame (void *frame_pointer, StackFrame *frame)
++{
++#if 0
++ /* This is commented out because we seem to be called with
++ * (current_thread_info()->addr_limit.seg)) == 0
++ * which means access_ok() _always_ fails.
++ *
++ * Not sure why (or if) this isn't the case for oprofile
++ */
++ if (!access_ok(VERIFY_READ, frame_pointer, sizeof(StackFrame)))
++ return 1;
++#endif
++
++ if (__copy_from_user_inatomic (
++ frame, frame_pointer, sizeof (StackFrame)))
++ return 1;
++
++ return 0;
++}
++
++DEFINE_PER_CPU(int, n_samples);
++
++static int
++timer_notify (struct pt_regs *regs)
++{
++ SysprofStackTrace *trace = head;
++ int i;
++ int is_user;
++ static atomic_t in_timer_notify = ATOMIC_INIT(1);
++ int n;
++
++ n = ++get_cpu_var(n_samples);
++ put_cpu_var(n_samples);
++
++ if (n % INTERVAL != 0)
++ return 0;
++
++ /* 0: locked, 1: unlocked */
++
++ if (!atomic_dec_and_test(&in_timer_notify))
++ goto out;
++
++ is_user = user_mode(regs);
++
++ if (!current || current->pid == 0)
++ goto out;
++
++ if (is_user && current->state != TASK_RUNNING)
++ goto out;
++
++ if (!is_user)
++ {
++ /* kernel */
++
++ trace->pid = current->pid;
++ trace->truncated = 0;
++ trace->n_addresses = 1;
++
++ /* 0x1 is taken by sysprof to mean "in kernel" */
++ trace->addresses[0] = (void *)0x1;
++ }
++ else
++ {
++ StackFrame *frame_pointer;
++ StackFrame frame;
++ memset(trace, 0, sizeof (SysprofStackTrace));
++
++ trace->pid = current->pid;
++ trace->truncated = 0;
++
++ i = 0;
++
++ trace->addresses[i++] = (void *)regs->REG_INS_PTR;
++
++ frame_pointer = (void *)regs->REG_FRAME_PTR;
++
++ while (read_frame (frame_pointer, &frame) == 0 &&
++ i < SYSPROF_MAX_ADDRESSES &&
++ (unsigned long)frame_pointer >= regs->REG_STACK_PTR)
++ {
++ trace->addresses[i++] = (void *)frame.return_address;
++ frame_pointer = (StackFrame *)frame.next;
++ }
++
++ trace->n_addresses = i;
++
++ if (i == SYSPROF_MAX_ADDRESSES)
++ trace->truncated = 1;
++ else
++ trace->truncated = 0;
++ }
++
++ if (head++ == &stack_traces[N_TRACES - 1])
++ head = &stack_traces[0];
++
++ wake_up (&wait_for_trace);
++
++out:
++ atomic_inc(&in_timer_notify);
++ return 0;
++}
++
++static int
++procfile_read(char *buffer,
++ char **buffer_location,
++ off_t offset,
++ int buffer_len,
++ int *eof,
++ void *data)
++{
++ if (head == tail)
++ return -EWOULDBLOCK;
++
++ *buffer_location = (char *)tail;
++
++ BUG_ON(tail->pid == 0);
++
++ if (tail++ == &stack_traces[N_TRACES - 1])
++ tail = &stack_traces[0];
++
++ return sizeof (SysprofStackTrace);
++}
++
++struct proc_dir_entry *trace_proc_file;
++static unsigned int
++procfile_poll(struct file *filp, poll_table *poll_table)
++{
++ if (head != tail)
++ return POLLIN | POLLRDNORM;
++
++ poll_wait(filp, &wait_for_trace, poll_table);
++
++ if (head != tail)
++ return POLLIN | POLLRDNORM;
++
++ return 0;
++}
++
++int
++init_module(void)
++{
++ static struct file_operations fops;
++
++ trace_proc_file =
++ create_proc_entry ("sysprof-trace", S_IFREG | S_IRUGO, &proc_root);
++
++ if (!trace_proc_file)
++ return 1;
++
++ fops = *trace_proc_file->proc_fops;
++ fops.poll = procfile_poll;
++
++ trace_proc_file->read_proc = procfile_read;
++ trace_proc_file->proc_fops = &fops;
++ trace_proc_file->size = sizeof (SysprofStackTrace);
++
++ register_timer_hook (timer_notify);
++
++ printk(KERN_ALERT "sysprof: loaded (%s)\n", PACKAGE_VERSION);
++
++ return 0;
++}
++
++void
++cleanup_module(void)
++{
++ unregister_timer_hook (timer_notify);
++
++ remove_proc_entry("sysprof-trace", &proc_root);
++
++ printk(KERN_ALERT "sysprof: unloaded\n");
++}
++
+diff -purN linux_2.6.24_org/drivers/sysprof/sysprof-module.h linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h
+--- linux_2.6.24_org/drivers/sysprof/sysprof-module.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/sysprof/sysprof-module.h 2008-02-15 18:58:59.000000000 +0000
+@@ -0,0 +1,37 @@
++/* Sysprof -- Sampling, systemwide CPU profiler
++ * Copyright 2004, Red Hat, Inc.
++ * Copyright 2004, 2005, Soeren Sandmann
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ */
++
++#ifndef SYSPROF_MODULE_H
++#define SYSPROF_MODULE_H
++
++typedef struct SysprofStackTrace SysprofStackTrace;
++
++#define SYSPROF_MAX_ADDRESSES 512
++
++struct SysprofStackTrace
++{
++ int pid; /* -1 if in kernel */
++ int truncated;
++ int n_addresses; /* note: this can be 1 if the process was compiled
++ * with -fomit-frame-pointer or is otherwise weird
++ */
++ void *addresses[SYSPROF_MAX_ADDRESSES];
++};
++
++#endif
+diff -purN linux_2.6.24_org/drivers/usb/core/driver.c linux_2.6.24_olpc/drivers/usb/core/driver.c
+--- linux_2.6.24_org/drivers/usb/core/driver.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/core/driver.c 2008-02-15 18:58:14.000000000 +0000
+@@ -1062,8 +1062,15 @@ static int usb_suspend_both(struct usb_d
+ break;
+ }
+ }
+- if (status == 0)
++ if (status == 0) {
++
++ /* Non-root devices don't need to do anything for FREEZE
++ * or PRETHAW. */
++ if (udev->parent && (msg.event == PM_EVENT_FREEZE ||
++ msg.event == PM_EVENT_PRETHAW))
++ goto done;
+ status = usb_suspend_device(udev, msg);
++ }
+
+ /* If the suspend failed, resume interfaces that did get suspended */
+ if (status != 0) {
+diff -purN linux_2.6.24_org/drivers/usb/core/quirks.c linux_2.6.24_olpc/drivers/usb/core/quirks.c
+--- linux_2.6.24_org/drivers/usb/core/quirks.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/core/quirks.c 2008-02-15 18:58:12.000000000 +0000
+@@ -45,6 +45,9 @@ static const struct usb_device_id usb_qu
+ /* SKYMEDI USB_DRIVE */
+ { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
+
++ /* Philips PSC805 audio device */
++ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
++
+ { } /* terminating entry must be last */
+ };
+
+diff -purN linux_2.6.24_org/drivers/usb/core/usb.h linux_2.6.24_olpc/drivers/usb/core/usb.h
+--- linux_2.6.24_org/drivers/usb/core/usb.h 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/core/usb.h 2008-02-15 18:58:14.000000000 +0000
+@@ -41,6 +41,7 @@ extern void usb_host_cleanup(void);
+ extern void usb_autosuspend_work(struct work_struct *work);
+ extern int usb_port_suspend(struct usb_device *dev);
+ extern int usb_port_resume(struct usb_device *dev);
++extern int usb_reset_suspended_device(struct usb_device *udev);
+ extern int usb_external_suspend_device(struct usb_device *udev,
+ pm_message_t msg);
+ extern int usb_external_resume_device(struct usb_device *udev);
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hcd.c linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-hcd.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-hcd.c 2008-02-15 18:58:12.000000000 +0000
+@@ -653,9 +653,16 @@ static irqreturn_t ehci_irq (struct usb_
+
+ /* complete the unlinking of some qh [4.15.2.3] */
+ if (status & STS_IAA) {
+- COUNT (ehci->stats.reclaim);
+- ehci->reclaim_ready = 1;
+- bh = 1;
++ if (!ehci->reclaim) {
++ printk(KERN_WARNING "%s would set reclaim_ready with nothing to reclaim!\n", __func__);
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++ WARN_ON(1);
++ } else {
++ COUNT (ehci->stats.reclaim);
++ ehci->reclaim_ready = 1;
++ bh = 1;
++ }
+ }
+
+ /* remote wakeup [4.3.1] */
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-hub.c linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-hub.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-hub.c 2008-02-15 18:58:12.000000000 +0000
+@@ -132,10 +132,15 @@ static int ehci_bus_suspend (struct usb_
+ ehci_quiesce (ehci);
+ hcd->state = HC_STATE_QUIESCING;
+ }
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++
+ ehci->command = ehci_readl(ehci, &ehci->regs->command);
+ if (ehci->reclaim)
+ ehci->reclaim_ready = 1;
+ ehci_work(ehci);
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
+
+ /* Unlike other USB host controller types, EHCI doesn't have
+ * any notion of "global" or bus-wide suspend. The driver has
+@@ -175,6 +180,9 @@ static int ehci_bus_suspend (struct usb_
+ ehci_halt (ehci);
+ hcd->state = HC_STATE_SUSPENDED;
+
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++
+ /* allow remote wakeup */
+ mask = INTR_MASK;
+ if (!device_may_wakeup(&hcd->self.root_hub->dev))
+@@ -195,6 +203,18 @@ static int ehci_bus_resume (struct usb_h
+ u32 temp;
+ u32 power_okay;
+ int i;
++#ifdef CONFIG_OLPC
++ u32 lo;
++ static void __iomem *usb_ehc_addr;
++
++ rdmsrl(0x51200009, lo);
++ usb_ehc_addr = ioremap(lo, 256);
++ writel(readl(usb_ehc_addr+0x54) | 0x1000, usb_ehc_addr+0x54);
++ writel(readl(usb_ehc_addr+0x58) | 0x1000, usb_ehc_addr+0x58);
++ writel(readl(usb_ehc_addr+0x5C) | 0x1000, usb_ehc_addr+0x5C);
++ writel(readl(usb_ehc_addr+0x60) | 0x1000, usb_ehc_addr+0x60);
++ iounmap(usb_ehc_addr);
++#endif
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep(5);
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-pci.c linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-pci.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-pci.c 2008-02-15 18:58:12.000000000 +0000
+@@ -247,6 +247,9 @@ static int ehci_pci_suspend(struct usb_h
+ rc = -EINVAL;
+ goto bail;
+ }
++printk(KERN_DEBUG "%s: USBCMD: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->command));
++printk(KERN_DEBUG "%s: USBSTS: 0x%x\n", __func__, ehci_readl(ehci, &ehci->regs->status));
++
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+ (void)ehci_readl(ehci, &ehci->regs->intr_enable);
+
+diff -purN linux_2.6.24_org/drivers/usb/host/ehci-q.c linux_2.6.24_olpc/drivers/usb/host/ehci-q.c
+--- linux_2.6.24_org/drivers/usb/host/ehci-q.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ehci-q.c 2008-02-15 18:58:12.000000000 +0000
+@@ -177,7 +177,7 @@ static int qtd_copy_status (
+ if (QTD_CERR (token))
+ status = -EPIPE;
+ else {
+- ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
++ printk(KERN_ERR "devpath %s ep%d%s 3strikes\n",
+ urb->dev->devpath,
+ usb_pipeendpoint (urb->pipe),
+ usb_pipein (urb->pipe) ? "in" : "out");
+@@ -973,6 +973,11 @@ static void end_unlink_async (struct ehc
+ struct ehci_qh *qh = ehci->reclaim;
+ struct ehci_qh *next;
+
++ if (!qh) {
++ printk(KERN_CRIT "%s with ehci->reclaim == NULL!\n", __func__);
++ WARN_ON(1);
++ return;
++ }
+ timer_action_done (ehci, TIMER_IAA_WATCHDOG);
+
+ // qh->hw_next = cpu_to_hc32(qh->qh_dma);
+diff -purN linux_2.6.24_org/drivers/usb/host/ohci-pci.c linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c
+--- linux_2.6.24_org/drivers/usb/host/ohci-pci.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/host/ohci-pci.c 2008-02-15 18:58:12.000000000 +0000
+@@ -317,6 +317,8 @@ static int ohci_pci_resume (struct usb_h
+ /* FIXME: we should try to detect loss of VBUS power here */
+ prepare_for_handover(hcd);
+
++ /* Force the PM core to resume the root hub */
++ hcd_to_bus(hcd)->root_hub->dev.power.prev_state.event = PM_EVENT_ON;
+ return 0;
+ }
+
+diff -purN linux_2.6.24_org/drivers/usb/storage/usb.c linux_2.6.24_olpc/drivers/usb/storage/usb.c
+--- linux_2.6.24_org/drivers/usb/storage/usb.c 2008-02-15 20:11:09.000000000 +0000
++++ linux_2.6.24_olpc/drivers/usb/storage/usb.c 2008-02-15 18:58:11.000000000 +0000
+@@ -244,7 +244,7 @@ static int storage_pre_reset(struct usb_
+ return 0;
+ }
+
+-static int storage_post_reset(struct usb_interface *iface)
++static void storage_post_reset(struct usb_interface *iface, int reset_resume)
+ {
+ struct us_data *us = usb_get_intfdata(iface);
+
+@@ -256,8 +256,10 @@ static int storage_post_reset(struct usb
+ /* FIXME: Notify the subdrivers that they need to reinitialize
+ * the device */
+
+- mutex_unlock(&us->dev_mutex);
+- return 0;
++ /* If this is a reset-resume then the pre_reset routine wasn't
++ * called, so we don't need to unlock the mutex. */
++ if (!reset_resume)
++ mutex_unlock(&us->dev_mutex);
+ }
+
+ /*
+diff -purN linux_2.6.24_org/drivers/video/fbmem.c linux_2.6.24_olpc/drivers/video/fbmem.c
+--- linux_2.6.24_org/drivers/video/fbmem.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/fbmem.c 2008-02-15 18:58:42.000000000 +0000
+@@ -820,6 +820,53 @@ static void try_to_load(int fb)
+ #endif /* CONFIG_KMOD */
+
+ int
++fb_powerup(struct fb_info *info)
++{
++ int ret = 0;
++
++ if (!info || info->state == FBINFO_STATE_RUNNING)
++ return 0;
++
++ if (info->fbops->fb_powerup)
++ ret = info->fbops->fb_powerup(info);
++
++ if (!ret) {
++ acquire_console_sem();
++ fb_set_suspend(info, 0);
++ release_console_sem();
++ }
++
++ return ret;
++}
++
++int
++fb_powerdown(struct fb_info *info)
++{
++ int ret = 0;
++
++ if (!info || info->state == FBINFO_STATE_SUSPENDED)
++ return 0;
++
++ /* Tell everybody that the fbdev is going down */
++ acquire_console_sem();
++ fb_set_suspend(info, 1);
++ release_console_sem();
++
++ if (info->fbops->fb_powerdown)
++ ret = info->fbops->fb_powerdown(info);
++
++ /* If the power down failed, then un-notify */
++
++ if (ret) {
++ acquire_console_sem();
++ fb_set_suspend(info, 0);
++ release_console_sem();
++ }
++
++ return ret;
++}
++
++int
+ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
+ {
+ struct fb_fix_screeninfo *fix = &info->fix;
+diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.c linux_2.6.24_olpc/drivers/video/geode/display_gx.c
+--- linux_2.6.24_org/drivers/video/geode/display_gx.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/display_gx.c 2008-02-15 18:58:41.000000000 +0000
+@@ -11,26 +11,44 @@
+ * Free Software Foundation; either version 2 of the License, or * (at your
+ * option) any later version.
+ */
++
++#include <linux/kernel.h>
+ #include <linux/spinlock.h>
+ #include <linux/fb.h>
+ #include <linux/delay.h>
+ #include <asm/io.h>
+ #include <asm/div64.h>
+ #include <asm/delay.h>
++#include <asm/olpc.h>
+
+ #include "geodefb.h"
+ #include "display_gx.h"
+
+-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
+-unsigned int gx_frame_buffer_size(void)
++static inline void rmwl(u32 val, u32 *reg)
+ {
+- return CONFIG_FB_GEODE_GX_FBSIZE;
++ u32 in = readl(reg);
++ if (in != val)
++ writel(val, reg);
+ }
+-#else
++
+ unsigned int gx_frame_buffer_size(void)
+ {
+ unsigned int val;
+
++#ifdef CONFIG_OLPC
++ if (machine_is_olpc() && !olpc_has_vsa()) {
++ u32 hi,lo;
++ rdmsr(GLIU0_P2D_RO0, lo, hi);
++
++ /* Top page number */
++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
++
++ val -= (lo & 0x000fffff); /* Subtract bottom page number */
++ val += 1; /* Adjust page count */
++ return (val << 12);
++ }
++#endif
++
+ /* FB size is reported by a virtual register */
+ /* Virtual register class = 0x02 */
+ /* VG_MEM_SIZE(512Kb units) = 0x00 */
+@@ -41,7 +59,6 @@ unsigned int gx_frame_buffer_size(void)
+ val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
+ return (val << 19);
+ }
+-#endif
+
+ int gx_line_delta(int xres, int bpp)
+ {
+@@ -63,23 +80,23 @@ static void gx_set_mode(struct fb_info *
+ gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
+ dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
+
+- /* Disable the timing generator. */
+- dcfg &= ~(DC_DCFG_TGEN);
+- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+-
+- /* Wait for pending memory requests before disabling the FIFO load. */
+- udelay(100);
+-
+- /* Disable FIFO load and compression. */
+- gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
+- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
+-
+- /* Setup DCLK and its divisor. */
+- par->vid_ops->set_dclk(info);
+-
+- /*
+- * Setup new mode.
+- */
++ /* Programming the clock is costly and ugly, so avoid if if we can */
++
++ if (par->curdclk != info->var.pixclock) {
++ /* Disable the timing generator. */
++ dcfg &= ~(DC_DCFG_TGEN);
++ writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
++
++ /* Wait for pending memory requests before disabling the FIFO load. */
++ udelay(100);
++
++ /* Disable FIFO load and compression. */
++ gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
++ writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++
++ /* Setup DCLK and its divisor. */
++ par->vid_ops->set_dclk(info);
++ }
+
+ /* Clear all unused feature bits. */
+ gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
+@@ -90,12 +107,13 @@ static void gx_set_mode(struct fb_info *
+ gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
+
+ /* Framebuffer start offset. */
+- writel(0, par->dc_regs + DC_FB_ST_OFFSET);
++ rmwl(0, par->dc_regs + DC_FB_ST_OFFSET);
+
+ /* Line delta and line buffer length. */
+- writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
+- writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
+- par->dc_regs + DC_LINE_SIZE);
++ rmwl(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
++
++ rmwl(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
++ par->dc_regs + DC_LINE_SIZE);
+
+
+ /* Enable graphics and video data and unmask address lines. */
+@@ -134,17 +152,16 @@ static void gx_set_mode(struct fb_info *
+ vblankend = vsyncend + info->var.upper_margin;
+ vtotal = vblankend;
+
+- writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
+- writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
+- writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
+-
+- writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
+- writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
+- writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
++ rmwl((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
++ rmwl((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
++ rmwl((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
++ rmwl((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
++ rmwl((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
++ rmwl((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
+
+ /* Write final register values. */
+- writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
+- writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
++ rmwl(dcfg, par->dc_regs + DC_DISPLAY_CFG);
++ rmwl(gcfg, par->dc_regs + DC_GENERAL_CFG);
+
+ par->vid_ops->configure_display(info);
+
+diff -purN linux_2.6.24_org/drivers/video/geode/display_gx.h linux_2.6.24_olpc/drivers/video/geode/display_gx.h
+--- linux_2.6.24_org/drivers/video/geode/display_gx.h 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/display_gx.h 2008-02-15 18:58:41.000000000 +0000
+@@ -20,6 +20,9 @@ extern struct geode_dc_ops gx_dc_ops;
+ #define GLD_MSR_CONFIG 0xC0002001
+ #define GLD_MSR_CONFIG_DM_FP 0x40
+
++/* Used for memory dection on the OLPC */
++#define GLIU0_P2D_RO0 0x10000029
++
+ /* Display controller registers */
+
+ #define DC_UNLOCK 0x00
+diff -purN linux_2.6.24_org/drivers/video/geode/geodefb.h linux_2.6.24_olpc/drivers/video/geode/geodefb.h
+--- linux_2.6.24_org/drivers/video/geode/geodefb.h 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/geodefb.h 2008-02-15 18:58:41.000000000 +0000
+@@ -12,6 +12,10 @@
+ #ifndef __GEODEFB_H__
+ #define __GEODEFB_H__
+
++#define FB_POWER_STATE_OFF 0
++#define FB_POWER_STATE_SUSPEND 1
++#define FB_POWER_STATE_ON 2
++
+ struct geodefb_info;
+
+ struct geode_dc_ops {
+@@ -21,18 +25,24 @@ struct geode_dc_ops {
+
+ struct geode_vid_ops {
+ void (*set_dclk)(struct fb_info *);
++ unsigned int (*get_dclk)(struct fb_info *);
+ void (*configure_display)(struct fb_info *);
+ int (*blank_display)(struct fb_info *, int blank_mode);
+ };
+
+ struct geodefb_par {
+ int enable_crt;
++ int fbactive; /* True if the current console is in KD_GRAPHICS mode */
+ int panel_x; /* dimensions of an attached flat panel, non-zero => enable panel */
+ int panel_y;
++ unsigned int curdclk; /* Used by GX to avoid unnessesary clock switching */
+ void __iomem *dc_regs;
+ void __iomem *vid_regs;
++ void __iomem *gp_regs;
+ struct geode_dc_ops *dc_ops;
+ struct geode_vid_ops *vid_ops;
++
++ int state;
+ };
+
+ #endif /* !__GEODEFB_H__ */
+diff -purN linux_2.6.24_org/drivers/video/geode/geode_regs.h linux_2.6.24_olpc/drivers/video/geode/geode_regs.h
+--- linux_2.6.24_org/drivers/video/geode/geode_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/geode/geode_regs.h 2008-02-15 18:58:41.000000000 +0000
+@@ -0,0 +1,255 @@
++/* This header file defines the registers and suspend/resume
++ structures for the Geode GX and LX. The lxfb driver defines
++ _GEODELX_ before including this file, which will unlock the
++ extra registers that are only valid for LX.
++*/
++
++#ifndef _GEODE_REGS_H_
++#define _GEODE_REGS_H_
++
++/* MSRs */
++
++#define GX_VP_MSR_PAD_SELECT 0xC0002011
++#define LX_VP_MSR_PAD_SELECT 0x48000011
++
++#define GEODE_MSR_GLCP_DOTPLL 0x4c000015
++
++#define GLCP_DOTPLL_RESET (1 << 0)
++#define GLCP_DOTPLL_BYPASS (1 << 15)
++#define GLCP_DOTPLL_HALFPIX (1 << 24)
++#define GLCP_DOTPLL_LOCK (1 << 25)
++
++/* Registers */
++#define VP_FP_START 0x400
++
++
++#ifdef _GEODELX_
++
++#define GP_REG_SIZE 0x7C
++#define DC_REG_SIZE 0xF0
++#define VP_REG_SIZE 0x158
++#define FP_REG_SIZE 0x70
++
++#else
++
++#define GP_REG_SIZE 0x50
++#define DC_REG_SIZE 0x90
++#define VP_REG_SIZE 0x138
++#define FP_REG_SIZE 0x70
++
++#endif
++
++#define DC_PAL_SIZE 0x105
++#define VP_COEFF_COUNT 512
++#define DC_HFILT_SIZE 256
++#define DC_VFILT_SIZE 256
++
++struct geoderegs {
++
++ struct {
++ u64 padsel;
++ u64 dotpll;
++
++#ifdef _GEODELX_
++ u64 dfglcfg;
++ u64 dcspare;
++#else
++ u64 rstpll;
++#endif
++ } msr;
++
++ union {
++ unsigned char b[GP_REG_SIZE];
++ struct {
++ u32 dst_offset; /* 0x00 */
++ u32 src_offset; /* 0x04 */
++ u32 stride; /* 0x08 */
++ u32 wid_height; /* 0x0C */
++ u32 src_color_fg; /* 0x10 */
++ u32 src_color_bg; /* 0x14 */
++ u32 pat_color_0; /* 0x18 */
++ u32 pat_color_1; /* 0x1C */
++ u32 pat_color_2; /* 0x20 */
++ u32 pat_color_3; /* 0x24 */
++ u32 pat_color_4; /* 0x28 */
++ u32 pat_color_5; /* 0x2C */
++ u32 pat_data_0; /* 0x30 */
++ u32 pat_data_1; /* 0x34 */
++ u32 raster_mode; /* 0x38 */
++ u32 vector_mode; /* 0x3C */
++ u32 blt_mode; /* 0x40 */
++ u32 blit_status; /* 0x4C */
++ u32 hst_src; /* 0x48 */
++ u32 base_offset; /* 0x4C */
++
++#ifdef _GEODELX_
++ u32 cmd_top; /* 0x50 */
++ u32 cmd_bot; /* 0x54 */
++ u32 cmd_read; /* 0x58 */
++ u32 cmd_write; /* 0x5C */
++ u32 ch3_offset; /* 0x60 */
++ u32 ch3_mode_str; /* 0x64 */
++ u32 ch3_width; /* 0x68 */
++ u32 ch3_hsrc; /* 0x6C */
++ u32 lut_index; /* 0x70 */
++ u32 lut_data; /* 0x74 */
++ u32 int_cntrl; /* 0x78 */
++#endif
++ } r;
++ } gp;
++
++ union {
++ unsigned char b[DC_REG_SIZE];
++
++ struct {
++ u32 unlock; /* 0x00 */
++ u32 gcfg; /* 0x04 */
++ u32 dcfg; /* 0x08 */
++ u32 arb; /* 0x0C */
++ u32 fb_st_offset; /* 0x10 */
++ u32 cb_st_offset; /* 0x14 */
++ u32 curs_st_offset; /* 0x18 */
++ u32 icon_st_offset; /* 0x1C */
++ u32 vid_y_st_offset; /* 0x20 */
++ u32 vid_u_st_offset; /* 0x24 */
++ u32 vid_v_st_offset; /* 0x28 */
++ u32 dctop; /* 0x2c */
++ u32 line_size; /* 0x30 */
++ u32 gfx_pitch; /* 0x34 */
++ u32 vid_yuv_pitch; /* 0x38 */
++ u32 rsvd2; /* 0x3C */
++ u32 h_active_timing; /* 0x40 */
++ u32 h_blank_timing; /* 0x44 */
++ u32 h_sync_timing; /* 0x48 */
++ u32 rsvd3; /* 0x4C */
++ u32 v_active_timing; /* 0x50 */
++ u32 v_blank_timing; /* 0x54 */
++ u32 v_sync_timing; /* 0x58 */
++ u32 fbactive; /* 0x5C */
++ u32 dc_cursor_x; /* 0x60 */
++ u32 dc_cursor_y; /* 0x64 */
++ u32 dc_icon_x; /* 0x68 */
++ u32 dc_line_cnt; /* 0x6C */
++ u32 rsvd5; /* 0x70 - palette address */
++ u32 rsvd6; /* 0x74 - palette data */
++ u32 dfifo_diag; /* 0x78 */
++ u32 cfifo_diag; /* 0x7C */
++ u32 dc_vid_ds_delta; /* 0x80 */
++ u32 gliu0_mem_offset; /* 0x84 */
++ u32 dv_ctl; /* 0x88 - added by LX */
++ u32 dv_acc; /* 0x8C */
++
++#ifdef _GEODELX_
++ u32 gfx_scale;
++ u32 irq_filt_ctl;
++ u32 filt_coeff1;
++ u32 filt_coeff2;
++ u32 vbi_event_ctl;
++ u32 vbi_odd_ctl;
++ u32 vbi_hor;
++ u32 vbi_ln_odd;
++ u32 vbi_ln_event;
++ u32 vbi_pitch;
++ u32 clr_key;
++ u32 clr_key_mask;
++ u32 clr_key_x;
++ u32 clr_key_y;
++ u32 irq;
++ u32 rsvd8;
++ u32 genlk_ctrl;
++ u32 vid_even_y_st_offset; /* 0xD8 */
++ u32 vid_even_u_st_offset; /* 0xDC */
++ u32 vid_even_v_st_offset; /* 0xE0 */
++ u32 v_active_even_timing; /* 0xE4 */
++ u32 v_blank_even_timing; /* 0xE8 */
++ u32 v_sync_even_timing; /* 0xEC */
++#endif
++ } r;
++ } dc;
++
++ union {
++ unsigned char b[VP_REG_SIZE];
++
++ struct {
++ u64 vcfg; /* 0x00 */
++ u64 dcfg; /* 0x08 */
++ u64 vx; /* 0x10 */
++ u64 vy; /* 0x18 */
++ u64 vs; /* 0x20 */
++ u64 vck; /* 0x28 */
++ u64 vcm; /* 0x30 */
++ u64 rsvd1; /* 0x38 - Gamma address*/
++ u64 rsvd2; /* 0x40 - Gamma data*/
++ u64 slr; /* 0x48 - LX only*/
++ u64 misc; /* 0x50 */
++ u64 ccs; /* 0x58 */
++ u64 vys; /* 0x60 */
++ u64 vxs; /* 0x68 */
++ u64 rsvd4; /* 0x70 */
++ u64 vdc; /* 0x78 */
++ u64 vco; /* 0x80 */
++ u64 crc; /* 0x88 */
++ u64 crc32; /* 0x90 */
++ u64 vde; /* 0x98 */
++ u64 cck; /* 0xA0 */
++ u64 ccm; /* 0xA8 */
++ u64 cc1; /* 0xB0 */
++ u64 cc2; /* 0xB8 */
++ u64 a1x; /* 0xC0 */
++ u64 a1y; /* 0xC8 */
++ u64 a1c; /* 0xD0 */
++ u64 a1t; /* 0xD8 */
++ u64 a2x; /* 0xE0 */
++ u64 a2y; /* 0xE8 */
++ u64 a2c; /* 0xF0 */
++ u64 a2t; /* 0xF8 */
++ u64 a3x; /* 0x100 */
++ u64 a3y; /* 0x108 */
++ u64 a3c; /* 0x110 */
++ u64 a3t; /* 0x118 */
++ u64 vrr; /* 0x120 */
++ u64 awt; /* 0x128 */
++ u64 vtm; /* 0x130 */
++#ifdef _GEODELX_
++ u64 vye; /* 0x138 */
++ u64 a1ye; /* 0x140 */
++ u32 a2ye; /* 0x148 */
++ u32 a3ye; /* 0x150 */
++#endif
++ } r;
++ } vp;
++
++ union {
++ unsigned char b[FP_REG_SIZE];
++
++ struct {
++ u64 pt1; /* 0x400 */
++ u64 pt2; /* 0x408 */
++ u64 pm; /* 0x410 */
++ u64 dfc; /* 0x418 */
++ u64 blfsr; /* 0x420 */
++ u64 rlfsr; /* 0x428 */
++ u64 fmi; /* 0x430 */
++ u64 fmd; /* 0x438 */
++ u64 rsvd; /* 0x440 */
++ u64 dca; /* 0x448 */
++ u64 dmd; /* 0x450 */
++ u64 crc; /* 0x458 */
++ u64 fbb; /* 0x460 */
++ u64 crc32; /* 0x468 */
++ } r;
++ } fp;
++
++ u32 pal[DC_PAL_SIZE];
++ u32 gamma[256];
++
++#ifdef _GEODELX_
++
++ u32 hcoeff[DC_HFILT_SIZE * 2];
++ u32 vcoeff[DC_VFILT_SIZE];
++
++ u32 vp_coeff[VP_COEFF_COUNT];
++#endif
++};
++
++#endif
+diff -purN linux_2.6.24_org/drivers/video/geode/gxfb_core.c linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c
+--- linux_2.6.24_org/drivers/video/geode/gxfb_core.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/gxfb_core.c 2008-02-15 18:58:41.000000000 +0000
+@@ -30,12 +30,31 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/notifier.h>
++#include <linux/vt_kern.h>
++#include <linux/console.h>
++#include <asm/uaccess.h>
++#include <asm/olpc.h>
+
+ #include "geodefb.h"
+ #include "display_gx.h"
+ #include "video_gx.h"
+
++#define FBIOSGAMMA _IOW('F', 0x20, void *)
++#define FBIOGGAMMA _IOW('F', 0x21, void *)
++
++#ifdef DEBUG
++
++#define FBIODUMPGP _IOW('F', 0x22, void *)
++#define FBIODUMPDC _IOW('F', 0x23, void *)
++#define FBIODUMPVP _IOW('F', 0x24, void *)
++#define FBIODUMPFP _IOW('F', 0x25, void *)
++
++#endif
++
+ static char *mode_option;
++static int noclear;
++struct fb_info *gxfb_info;
+
+ /* Modes relevant to the GX (taken from modedb.c) */
+ static const struct fb_videomode gx_modedb[] __initdata = {
+@@ -103,8 +122,20 @@ static const struct fb_videomode gx_mode
+ { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1200x900-75 - CRT timings for the OLPC mode */
++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
++ 0, FB_VMODE_NONINTERLACED, 0 }
+ };
+
++#ifdef CONFIG_OLPC
++static const struct fb_videomode gx_dcon_modedb[] __initdata = {
++ /* The only mode the DCON has is 1200x900 */
++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
++ 0, FB_VMODE_NONINTERLACED, 0 }
++};
++#endif
++
++
+ static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+ {
+ if (var->xres > 1600 || var->yres > 1200)
+@@ -137,7 +168,7 @@ static int gxfb_check_var(struct fb_var_
+ return 0;
+ }
+
+-static int gxfb_set_par(struct fb_info *info)
++int gxfb_set_par(struct fb_info *info)
+ {
+ struct geodefb_par *par = info->par;
+
+@@ -204,16 +235,26 @@ static int gxfb_blank(int blank_mode, st
+ return par->vid_ops->blank_display(info, blank_mode);
+ }
+
++static int fbsize;
++
+ static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+ {
+ struct geodefb_par *par = info->par;
+- int fb_len;
+ int ret;
+
+ ret = pci_enable_device(dev);
+ if (ret < 0)
+ return ret;
+
++ ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
++ if (ret < 0)
++ return ret;
++
++ par->gp_regs = ioremap(pci_resource_start(dev, 1),
++ pci_resource_len(dev, 1));
++ if (!par->gp_regs)
++ return -ENOMEM;
++
+ ret = pci_request_region(dev, 3, "gxfb (video processor)");
+ if (ret < 0)
+ return ret;
+@@ -232,36 +273,118 @@ static int __init gxfb_map_video_memory(
+ ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
+ if (ret < 0)
+ return ret;
+- if ((fb_len = gx_frame_buffer_size()) < 0)
+- return -ENOMEM;
++
++ /* If the fbsize wasn't specified then try to probe it */
++
++ if (!fbsize) {
++ fbsize = gx_frame_buffer_size();
++ if (fbsize == 0)
++ return -ENOMEM;
++ }
++
+ info->fix.smem_start = pci_resource_start(dev, 0);
+- info->fix.smem_len = fb_len;
++ info->fix.smem_len = fbsize;
+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+ if (!info->screen_base)
+ return -ENOMEM;
+
+- /* Set the 16MB aligned base address of the graphics memory region
++ /* Set the 16MiB aligned base address of the graphics memory region
+ * in the display controller */
+
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_GLIU0_MEM_OFFSET);
+
+- dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
++ dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
+ info->fix.smem_len / 1024, info->fix.smem_start);
+
+ return 0;
+ }
+
++static int gxfb_ioctl( struct fb_info *info, unsigned int cmd,
++ unsigned long arg)
++{
++ unsigned int gamma[GXFB_GAMMA_DWORDS];
++ int ret = -EINVAL;
++ struct geodefb_par *par = info->par;
++ int i;
++
++ switch(cmd) {
++ case FBIOSGAMMA:
++ /* Read the gamma information from the user - 256 dwords */
++
++ if (copy_from_user(gamma, (void * __user) arg, GXFB_GAMMA_SIZE))
++ return -EFAULT;
++
++ writel(0, par->vid_regs + GX_GAR);
++
++ /* Sequential writes to the data register will increment the
++ address automatically */
++
++ for(i = 0; i < GXFB_GAMMA_DWORDS; i++)
++ writel(gamma[i] & 0xFFFFFF, par->vid_regs + GX_GDR);
++
++ writel(readl(par->vid_regs + GX_MISC) & ~GX_MISC_GAM_EN,
++ par->vid_regs + GX_MISC);
++
++ ret = 0;
++ break;
++
++ case FBIOGGAMMA:
++ if (readl(par->vid_regs + GX_MISC) & GX_MISC_GAM_EN)
++ return -EINVAL;
++
++ memset(gamma, 0, GXFB_GAMMA_SIZE);
++ writel(0, par->vid_regs + GX_GAR);
++
++ for(i = 0; i < GXFB_GAMMA_DWORDS;i++)
++ gamma[i] = readl(par->vid_regs + GX_GDR);
++
++ if (copy_to_user((void * __user) arg, gamma, GXFB_GAMMA_SIZE))
++ ret = -EFAULT;
++ else
++ ret = 0;
++
++ break;
++
++#ifdef DEBUG
++ case FBIODUMPGP:
++ ret = 0;
++ dump_regs(info, 0);
++ break;
++
++ case FBIODUMPDC:
++ ret = 0;
++ dump_regs(info, 1);
++ break;
++
++ case FBIODUMPVP:
++ ret = 0;
++ dump_regs(info, 2);
++ break;
++
++ case FBIODUMPFP:
++ ret = 0;
++ dump_regs(info, 3);
++ break;
++#endif
++ }
++
++ return ret;
++}
++
+ static struct fb_ops gxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = gxfb_check_var,
+ .fb_set_par = gxfb_set_par,
+ .fb_setcolreg = gxfb_setcolreg,
+ .fb_blank = gxfb_blank,
++ .fb_ioctl = gxfb_ioctl,
+ /* No HW acceleration for now. */
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
++ .fb_powerdown = gxfb_powerdown,
++ .fb_powerup = gxfb_powerup,
+ };
+
+ static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+@@ -303,23 +426,86 @@ static struct fb_info * __init gxfb_init
+ return info;
+ }
+
+-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
++static int gxfb_console_notify(struct notifier_block *self,
++ unsigned long action, void *data)
++{
++ if (gxfb_info != NULL) {
++ struct geodefb_par *par = gxfb_info->par;
++ par->fbactive = (action == CONSOLE_EVENT_SWITCH_TEXT) ? 0 : 1;
++ }
++
++ return NOTIFY_OK;
++}
++
++static struct notifier_block gxfb_console_notifier = {
++ .notifier_call = gxfb_console_notify
++};
++
++#ifdef CONFIG_PM
++
++static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++ struct geodefb_par *par = info->par;
++
++ if (pdev->dev.power.power_state.event == state.event)
++ return 0;
++
++ if (state.event == PM_EVENT_SUSPEND) {
++
++ acquire_console_sem();
++ gxfb_powerdown(info);
++
++ par->state = FB_POWER_STATE_OFF;
++ fb_set_suspend(info, 1);
++
++ release_console_sem();
++ }
++
++ pdev->dev.power.power_state = state;
++ return 0;
++}
++
++static int gxfb_resume(struct pci_dev *pdev)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++
++ acquire_console_sem();
++
++ /* Turn the engine completely on */
++
++ if (gxfb_powerup(info))
++ printk(KERN_ERR "gxfb: Powerup failed\n");
++
++ fb_set_suspend(info, 0);
++ release_console_sem();
++
++ pdev->dev.power.power_state = PMSG_ON;
++ return 0;
++}
++#endif
++
++static int __init gxfb_probe(struct pci_dev *pdev,
++ const struct pci_device_id *id)
+ {
+ struct geodefb_par *par;
+- struct fb_info *info;
+ int ret;
+ unsigned long val;
+
+- info = gxfb_init_fbinfo(&pdev->dev);
+- if (!info)
++ struct fb_videomode *modedb_ptr;
++ int modedb_size;
++
++ gxfb_info = gxfb_init_fbinfo(&pdev->dev);
++ if (gxfb_info == NULL)
+ return -ENOMEM;
+- par = info->par;
++
++ par = gxfb_info->par;
+
+ /* GX display controller and GX video device. */
+ par->dc_ops = &gx_dc_ops;
+ par->vid_ops = &gx_vid_ops;
+
+- if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
++ if ((ret = gxfb_map_video_memory(gxfb_info, pdev)) < 0) {
+ dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
+ goto err;
+ }
+@@ -333,32 +519,60 @@ static int __init gxfb_probe(struct pci_
+ else
+ par->enable_crt = 1;
+
+- ret = fb_find_mode(&info->var, info, mode_option,
+- gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
++ /* Get the current dotclock */
++
++ par->curdclk = (par->vid_ops->get_dclk) ? par->vid_ops->get_dclk(gxfb_info) : 0;
++
++ /* We need to determine a display mode right now, so we will
++ * check to see if the DCON was previously detected by the BIOS
++ * and use that to make our mode database decision.
++ */
++
++ modedb_ptr = (struct fb_videomode *) gx_modedb;
++ modedb_size = ARRAY_SIZE(gx_modedb);
++
++#ifdef CONFIG_OLPC
++ if (olpc_has_dcon()) {
++ modedb_ptr = (struct fb_videomode *) gx_dcon_modedb;
++ modedb_size = ARRAY_SIZE(gx_dcon_modedb);
++ }
++#endif
++
++ ret = fb_find_mode(&gxfb_info->var, gxfb_info, mode_option,
++ modedb_ptr, modedb_size, NULL, 16);
++
+ if (ret == 0 || ret == 4) {
+ dev_err(&pdev->dev, "could not find valid video mode\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
++ /* Clear the screen of garbage, unless noclear was specified,
++ * in which case we assume the user knows what he is doing */
++
++ if (!noclear)
++ memset_io(gxfb_info->screen_base, 0, gxfb_info->fix.smem_len);
++
++ gxfb_check_var(&gxfb_info->var, gxfb_info);
++ gxfb_set_par(gxfb_info);
++
++ /* We are powered up */
++ par->state = FB_POWER_STATE_ON;
+
+- /* Clear the frame buffer of garbage. */
+- memset_io(info->screen_base, 0, info->fix.smem_len);
+
+- gxfb_check_var(&info->var, info);
+- gxfb_set_par(info);
++ console_event_register(&gxfb_console_notifier);
+
+- if (register_framebuffer(info) < 0) {
++ if (register_framebuffer(gxfb_info) < 0) {
+ ret = -EINVAL;
+ goto err;
+ }
+- pci_set_drvdata(pdev, info);
+- printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
++ pci_set_drvdata(pdev, gxfb_info);
++ printk(KERN_INFO "fb%d: %s frame buffer device\n", gxfb_info->node, gxfb_info->fix.id);
+ return 0;
+
+ err:
+- if (info->screen_base) {
+- iounmap(info->screen_base);
++ if (gxfb_info->screen_base) {
++ iounmap(gxfb_info->screen_base);
+ pci_release_region(pdev, 0);
+ }
+ if (par->vid_regs) {
+@@ -370,8 +584,9 @@ static int __init gxfb_probe(struct pci_
+ pci_release_region(pdev, 2);
+ }
+
+- if (info)
+- framebuffer_release(info);
++ if (gxfb_info)
++ framebuffer_release(gxfb_info);
++
+ return ret;
+ }
+
+@@ -397,9 +612,7 @@ static void gxfb_remove(struct pci_dev *
+ }
+
+ static struct pci_device_id gxfb_id_table[] = {
+- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO,
+- PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
+- 0xff0000, 0 },
++ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
+ { 0, }
+ };
+
+@@ -410,22 +623,30 @@ static struct pci_driver gxfb_driver = {
+ .id_table = gxfb_id_table,
+ .probe = gxfb_probe,
+ .remove = gxfb_remove,
++#ifdef CONFIG_PM
++ .suspend = gxfb_suspend,
++ .resume = gxfb_resume
++#endif
+ };
+
+ #ifndef MODULE
+-static int __init gxfb_setup(char *options)
+-{
++static int __init gxfb_setup(char *options) {
+
+ char *opt;
+
+ if (!options || !*options)
+ return 0;
+
+- while ((opt = strsep(&options, ",")) != NULL) {
++ while((opt = strsep(&options, ",")) != NULL) {
+ if (!*opt)
+ continue;
+
+- mode_option = opt;
++ if (!strncmp(opt, "fbsize:", 7))
++ fbsize = simple_strtoul(opt+7, NULL, 0);
++ else if (!strcmp(opt, "noclear"))
++ noclear = 1;
++ else
++ mode_option = opt;
+ }
+
+ return 0;
+@@ -444,7 +665,6 @@ static int __init gxfb_init(void)
+ #endif
+ return pci_register_driver(&gxfb_driver);
+ }
+-
+ static void __exit gxfb_cleanup(void)
+ {
+ pci_unregister_driver(&gxfb_driver);
+@@ -456,5 +676,8 @@ module_exit(gxfb_cleanup);
+ module_param(mode_option, charp, 0);
+ MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
+
++module_param(fbsize, int, 0);
++MODULE_PARM_DESC(fbsize, "video memory size");
++
+ MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
+ MODULE_LICENSE("GPL");
+diff -purN linux_2.6.24_org/drivers/video/geode/Kconfig linux_2.6.24_olpc/drivers/video/geode/Kconfig
+--- linux_2.6.24_org/drivers/video/geode/Kconfig 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/Kconfig 2008-02-15 18:58:41.000000000 +0000
+@@ -38,26 +38,6 @@ config FB_GEODE_GX
+
+ If unsure, say N.
+
+-config FB_GEODE_GX_SET_FBSIZE
+- bool "Manually specify the Geode GX framebuffer size"
+- depends on FB_GEODE_GX
+- default n
+- ---help---
+- If you want to manually specify the size of your GX framebuffer,
+- say Y here, otherwise say N to dynamically probe it.
+-
+- Say N unless you know what you are doing.
+-
+-config FB_GEODE_GX_FBSIZE
+- hex "Size of the GX framebuffer, in bytes"
+- depends on FB_GEODE_GX_SET_FBSIZE
+- default "0x1600000"
+- ---help---
+- Specify the size of the GX framebuffer. Normally, you will
+- want this to be MB aligned. Common values are 0x80000 (8MB)
+- and 0x1600000 (16MB). Don't change this unless you know what
+- you are doing
+-
+ config FB_GEODE_GX1
+ tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
+ depends on FB && FB_GEODE && EXPERIMENTAL
+diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_core.c linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c
+--- linux_2.6.24_org/drivers/video/geode/lxfb_core.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/lxfb_core.c 2008-02-15 18:58:41.000000000 +0000
+@@ -21,7 +21,8 @@
+ #include <linux/fb.h>
+ #include <linux/init.h>
+ #include <linux/pci.h>
+-#include <linux/uaccess.h>
++#include <asm/uaccess.h>
++#include <asm/olpc.h>
+
+ #include "lxfb.h"
+
+@@ -35,186 +36,84 @@ static int fbsize;
+ */
+
+ const struct fb_videomode geode_modedb[] __initdata = {
+- /* 640x480-60 */
+- { NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
++ /* 640x480-60 VESA */
++ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 640x480-75 VESA */
++ { NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 640x480-85 VESA */
++ { NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-60 VESA */
++ { NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-75 VESA */
++ { NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 800x600-85 VESA */
++ { NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-60 VESA */
++ { NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
++ 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-75 VESA */
++ { NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1024x768-85 VESA */
++ { NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x960-60 VESA */
++ { NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x960-85 VESA */
++ { NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-60 VESA */
++ { NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-75 VESA */
++ { NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1280x1024-85 VESA */
++ { NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x400-70 */
+- { NULL, 70, 640, 400, 39770, 40, 8, 28, 5, 96, 2,
+- FB_SYNC_HOR_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-70 */
+- { NULL, 70, 640, 480, 35014, 88, 24, 15, 2, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-72 */
+- { NULL, 72, 640, 480, 32102, 120, 16, 20, 1, 40, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-75 */
+- { NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-85 */
+- { NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-90 */
+- { NULL, 90, 640, 480, 26392, 96, 32, 22, 1, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-100 */
+- { NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 640x480-60 */
+- { NULL, 60, 640, 480, 39682, 48, 16, 25, 10, 88, 2,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-56 */
+- { NULL, 56, 800, 600, 27901, 128, 24, 22, 1, 72, 2,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-60 */
+- { NULL, 60, 800, 600, 25131, 72, 32, 23, 1, 136, 4,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-70 */
+- { NULL, 70, 800, 600, 21873, 120, 40, 21, 4, 80, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-72 */
+- { NULL, 72, 800, 600, 20052, 64, 56, 23, 37, 120, 6,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-75 */
+- { NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-85 */
+- { NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-90 */
+- { NULL, 90, 800, 600, 16648, 128, 40, 28, 1, 88, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-100 */
+- { NULL, 100, 800, 600, 14667, 136, 48, 27, 1, 88, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 800x600-60 */
+- { NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-60 */
+- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-70 */
+- { NULL, 70, 1024, 768, 13346, 144, 24, 29, 3, 136, 6,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-72 */
+- { NULL, 72, 1024, 768, 12702, 168, 56, 29, 4, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-75 */
+- { NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-85 */
+- { NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-90 */
+- { NULL, 90, 1024, 768, 9981, 176, 64, 37, 1, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-100 */
+- { NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1024x768-60 */
+- { NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-60 */
+- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-70 */
+- { NULL, 70, 1152, 864, 10254, 192, 72, 32, 8, 120, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-72 */
+- { NULL, 72, 1152, 864, 9866, 200, 72, 33, 7, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-75 */
+- { NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-85 */
+- { NULL, 85, 1152, 864, 8357, 200, 72, 37, 3, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-90 */
+- { NULL, 90, 1152, 864, 7719, 208, 80, 42, 9, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-100 */
+- { NULL, 100, 1152, 864, 6947, 208, 80, 48, 3, 128, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1152x864-60 */
+- { NULL, 60, 1152, 864, 12251, 184, 64, 27, 1, 120, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-60 */
+- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-70 */
+- { NULL, 70, 1280, 1024, 7719, 224, 88, 38, 6, 136, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-72 */
+- { NULL, 72, 1280, 1024, 7490, 224, 88, 39, 7, 136, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-75 */
+- { NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-85 */
+- { NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-90 */
+- { NULL, 90, 1280, 1024, 5791, 240, 96, 51, 12, 144, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-100 */
+- { NULL, 100, 1280, 1024, 5212, 240, 96, 57, 6, 144, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1280x1024-60 */
+- { NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3,
+- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-60 */
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1600x1200-60 VESA */
+ { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-70 */
+- { NULL, 70, 1600, 1200, 5291, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-72 */
+- { NULL, 72, 1600, 1200, 5053, 288, 112, 47, 13, 176, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-75 */
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1600x1200-75 VESA */
+ { NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-85 */
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1600x1200-85 VESA */
+ { NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-90 */
+- { NULL, 90, 1600, 1200, 3981, 304, 128, 60, 1, 176, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-100 */
+- { NULL, 100, 1600, 1200, 3563, 304, 128, 67, 1, 176, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1600x1200-60 */
+- { NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
+ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+- FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-60 */
+- { NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-70 */
+- { NULL, 70, 1920, 1440, 3593, 360, 152, 55, 8, 208, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-72 */
+- { NULL, 72, 1920, 1440, 3472, 360, 152, 68, 4, 208, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-75 */
+- { NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
+- /* 1920x1440-85 */
+- { NULL, 85, 1920, 1440, 2929, 368, 152, 68, 1, 216, 3,
+- 0, FB_VMODE_NONINTERLACED, 0 },
++ FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
++ /* 1200x900-75 - CRT timings for the OLPC mode */
++ { NULL, 75, 1200, 900, 8049, 104, 240, 29, 54, 136, 3,
++ 0, FB_VMODE_NONINTERLACED, 0 }
+ };
+
++#ifdef CONFIG_OLPC
++const struct fb_videomode olpc_dcon_modedb[] __initdata = {
++ /* The only mode the DCON has is 1200x900 */
++ { NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
++ FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
++ FB_VMODE_NONINTERLACED, 0 }
++};
++#endif
++
+ static int lxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+ {
+ if (var->xres > 1920 || var->yres > 1440)
+@@ -255,8 +154,7 @@ static int lxfb_set_par(struct fb_info *
+ fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
+ }
+
+- info->fix.line_length = lx_get_pitch(info->var.xres,
+- info->var.bits_per_pixel);
++ info->fix.line_length = lx_get_pitch(info->var.xres, info->var.bits_per_pixel);
+
+ lx_set_mode(info);
+ return 0;
+@@ -371,24 +269,61 @@ static int __init lxfb_map_video_memory(
+ writel(info->fix.smem_start & 0xFF000000,
+ par->dc_regs + DC_PHY_MEM_OFFSET);
+
+- writel(0, par->dc_regs + DC_UNLOCK);
+-
+ dev_info(&dev->dev, "%d KB of video memory at 0x%lx\n",
+ info->fix.smem_len / 1024, info->fix.smem_start);
+
+ return 0;
+ }
+
++static int lxfb_set_gamma(struct fb_info *info, void * __user data)
++{
++ unsigned int gamma[LXFB_GAMMA_DWORDS];
++
++ if (copy_from_user(gamma, data, LXFB_GAMMA_SIZE))
++ return -EFAULT;
++
++ lx_set_gamma(info, gamma, LXFB_GAMMA_SIZE);
++ return 0;
++}
++
++static int lxfb_get_gamma(struct fb_info *info, void * __user data)
++{
++ unsigned int gamma[LXFB_GAMMA_DWORDS];
++ memset(gamma, 0, sizeof(gamma));
++
++ lx_get_gamma(info, gamma, LXFB_GAMMA_DWORDS);
++
++ return copy_to_user(data, gamma, LXFB_GAMMA_SIZE) ?
++ -EFAULT : 0;
++}
++
++static int lxfb_ioctl( struct fb_info *info, unsigned int cmd,
++ unsigned long arg)
++{
++ switch(cmd) {
++ case FBIOSGAMMA:
++ return lxfb_set_gamma(info, (void * __user) arg);
++
++ case FBIOGGAMMA:
++ return lxfb_get_gamma(info, (void * __user) arg);
++ }
++
++ return -ENOTTY;
++}
++
+ static struct fb_ops lxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = lxfb_check_var,
+ .fb_set_par = lxfb_set_par,
+ .fb_setcolreg = lxfb_setcolreg,
+ .fb_blank = lxfb_blank,
++ .fb_ioctl = lxfb_ioctl,
+ /* No HW acceleration for now. */
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
++ .fb_powerdown = lx_shutdown,
++ .fb_powerup = lx_powerup,
+ };
+
+ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+@@ -431,6 +366,45 @@ static struct fb_info * __init lxfb_init
+ return info;
+ }
+
++#ifdef CONFIG_PM
++
++static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++
++ if (pdev->dev.power.power_state.event == state.event)
++ return 0;
++
++ if (state.event == PM_EVENT_SUSPEND) {
++
++ acquire_console_sem();
++ lx_shutdown(info);
++ fb_set_suspend(info, 1);
++ release_console_sem();
++ }
++
++ pdev->dev.power.power_state = state;
++ return 0;
++}
++
++static int lxfb_resume(struct pci_dev *pdev)
++{
++ struct fb_info *info = pci_get_drvdata(pdev);
++
++ acquire_console_sem();
++
++ /* Turn the engine completely on */
++
++ lx_powerup(info);
++ fb_set_suspend(info, 0);
++ release_console_sem();
++
++ pdev->dev.power.power_state = PMSG_ON;
++ return 0;
++}
++
++#endif
++
+ static int __init lxfb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+ {
+@@ -467,6 +441,13 @@ static int __init lxfb_probe(struct pci_
+ modedb_ptr = (struct fb_videomode *) geode_modedb;
+ modedb_size = ARRAY_SIZE(geode_modedb);
+
++#ifdef CONFIG_OLPC
++ if (olpc_has_dcon()) {
++ modedb_ptr = (struct fb_videomode *) olpc_dcon_modedb;
++ modedb_size = ARRAY_SIZE(olpc_dcon_modedb);
++ }
++#endif
++
+ ret = fb_find_mode(&info->var, info, mode_option,
+ modedb_ptr, modedb_size, NULL, 16);
+
+@@ -556,6 +537,10 @@ static struct pci_driver lxfb_driver = {
+ .id_table = lxfb_id_table,
+ .probe = lxfb_probe,
+ .remove = lxfb_remove,
++#ifdef CONFIG_PM
++ .suspend = lxfb_suspend,
++ .resume = lxfb_resume
++#endif
+ };
+
+ #ifndef MODULE
+diff -purN linux_2.6.24_org/drivers/video/geode/lxfb.h linux_2.6.24_olpc/drivers/video/geode/lxfb.h
+--- linux_2.6.24_org/drivers/video/geode/lxfb.h 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/lxfb.h 2008-02-15 18:58:41.000000000 +0000
+@@ -25,10 +25,23 @@ void lx_set_mode(struct fb_info *);
+ void lx_get_gamma(struct fb_info *, unsigned int *, int);
+ void lx_set_gamma(struct fb_info *, unsigned int *, int);
+ unsigned int lx_framebuffer_size(void);
++int lx_shutdown(struct fb_info *);
++int lx_powerup(struct fb_info *);
+ int lx_blank_display(struct fb_info *, int);
+ void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
+ unsigned int, unsigned int);
+
++
++
++/* ioctl() defines */
++
++#define FBIOSGAMMA _IOW('F', 0x20, void *)
++#define FBIOGGAMMA _IOW('F', 0x21, void *)
++
++/* General definitions */
++#define LXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
++#define LXFB_GAMMA_SIZE (LXFB_GAMMA_DWORDS * sizeof(unsigned int))
++
+ /* MSRS */
+
+ #define MSR_LX_GLD_CONFIG 0x48002001
+@@ -127,7 +140,7 @@ void lx_set_palette_reg(struct fb_info *
+
+ #define DC_GFX_SCALE 0x90
+ #define DC_IRQ_FILT_CTL 0x94
+-
++#define DC_IRQFILT_H_FILT_SEL 0x00000400
+
+ #define DC_IRQ 0xC8
+ #define DC_IRQ_MASK (1 << 0)
+diff -purN linux_2.6.24_org/drivers/video/geode/lxfb_ops.c linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c
+--- linux_2.6.24_org/drivers/video/geode/lxfb_ops.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/lxfb_ops.c 2008-02-15 18:58:41.000000000 +0000
+@@ -11,11 +11,15 @@
+ #include <linux/kernel.h>
+ #include <linux/errno.h>
+ #include <linux/fb.h>
+-#include <linux/uaccess.h>
+-#include <linux/delay.h>
++#include <asm/uaccess.h>
++#include <asm/delay.h>
++#include <asm/olpc.h>
+
+ #include "lxfb.h"
+
++#define _GEODELX_
++#include "geode_regs.h"
++
+ /* TODO
+ * Support panel scaling
+ * Add acceleration
+@@ -290,6 +294,19 @@ unsigned int lx_framebuffer_size(void)
+ {
+ unsigned int val;
+
++#ifdef CONFIG_OLPC
++ if (machine_is_olpc() && !olpc_has_vsa()) {
++ u32 hi,lo;
++ rdmsr(MSR_LX_GLIU0_P2D_RO0, lo, hi);
++
++ /* Top page number */
++ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
++ val -= (lo & 0x000fffff); /* Subtract bottom page number */
++ val += 1; /* Adjust page count */
++ return (val << 12);
++ }
++#endif
++
+ /* The frame buffer size is reported by a VSM in VSA II */
+ /* Virtual Register Class = 0x02 */
+ /* VG_MEM_SIZE (1MB units) = 0x00 */
+@@ -301,6 +318,34 @@ unsigned int lx_framebuffer_size(void)
+ return (val << 20);
+ }
+
++void lx_set_gamma(struct fb_info *info, unsigned int *gamma, int len)
++{
++ int i;
++ struct lxfb_par *par = info->par;
++
++ writel(0, par->df_regs + DF_PAR);
++
++ /* Sequential writes to the data register will increment the
++ address automatically */
++
++ for(i = 0; i < len; i++)
++ writel(gamma[i] & 0xFFFFFF, par->df_regs + DF_PDR);
++
++ writel(readl(par->df_regs + DF_MISC) & ~DF_MISC_GAM_BYPASS,
++ par->df_regs + DF_MISC);
++}
++
++void lx_get_gamma(struct fb_info *info, unsigned int *gamma, int len)
++{
++ int i;
++ struct lxfb_par *par = info->par;
++
++ writel(0, par->df_regs + DF_PAR);
++
++ for(i = 0; i < len;i++)
++ gamma[i] = readl(par->df_regs + DF_PDR);
++}
++
+ void lx_set_mode(struct fb_info *info)
+ {
+ struct lxfb_par *par = info->par;
+@@ -313,6 +358,7 @@ void lx_set_mode(struct fb_info *info)
+ int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+ /* Unlock the DC registers */
++ readl(par->dc_regs + DC_UNLOCK);
+ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
+
+ lx_graphics_disable(info);
+@@ -483,54 +529,408 @@ void lx_set_palette_reg(struct fb_info *
+ writel(val, par->dc_regs + DC_PAL_DATA);
+ }
+
++static int lx_blank_mode = FB_BLANK_UNBLANK;
++
+ int lx_blank_display(struct fb_info *info, int blank_mode)
+ {
+ struct lxfb_par *par = info->par;
+- u32 dcfg, fp_pm;
+- int blank, hsync, vsync;
++ u32 dcfg, val;
++
++ if (blank_mode == lx_blank_mode)
++ return 0;
++
++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
++
++ if (lx_blank_mode == FB_BLANK_POWERDOWN) {
++ val = readl(par->df_regs + DF_FP_PM);
++ writel(val | DF_FP_PM_P, par->df_regs + DF_FP_PM);
++ val = readl(par->df_regs + DF_MISC) & ~DF_MISC_DAC_PWRDN;
++ writel(val, par->df_regs + DF_MISC);
++
++ val = readl(par->dc_regs + DC_GENERAL_CFG) | DC_GCFG_DFLE;
++ writel(val, par->dc_regs + DC_GENERAL_CFG);
++
++ val = readl(par->dc_regs + DC_DISPLAY_CFG) | DC_DCFG_TGEN;
++ writel(val, par->dc_regs + DC_DISPLAY_CFG);
++ }
++
++ dcfg = readl(par->df_regs + DF_DISPLAY_CFG);
+
+ /* CRT power saving modes. */
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+- blank = 0; hsync = 1; vsync = 1;
++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN;
++ dcfg |= DF_DCFG_DAC_BL_EN;
+ break;
+ case FB_BLANK_NORMAL:
+- blank = 1; hsync = 1; vsync = 1;
++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN;
++ dcfg |= DF_DCFG_DAC_BL_EN;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+- blank = 1; hsync = 1; vsync = 0;
++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_DAC_BL_EN;
++ dcfg &= ~DF_DCFG_VSYNC_EN;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+- blank = 1; hsync = 0; vsync = 1;
++ dcfg |= DF_DCFG_CRT_EN | DF_DCFG_VSYNC_EN | DF_DCFG_DAC_BL_EN;
++ dcfg &= ~DF_DCFG_HSYNC_EN;
+ break;
+ case FB_BLANK_POWERDOWN:
+- blank = 1; hsync = 0; vsync = 0;
++ dcfg &= ~DF_DCFG_DAC_BL_EN;
++ dcfg &= ~(DF_DCFG_CRT_EN | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN);
+ break;
+ default:
++ writel(0, par->dc_regs + DC_UNLOCK);
+ return -EINVAL;
+ }
+
+- dcfg = readl(par->df_regs + DF_DISPLAY_CFG);
+- dcfg &= ~(DF_DCFG_DAC_BL_EN
+- | DF_DCFG_HSYNC_EN | DF_DCFG_VSYNC_EN);
+- if (!blank)
+- dcfg |= DF_DCFG_DAC_BL_EN;
+- if (hsync)
+- dcfg |= DF_DCFG_HSYNC_EN;
+- if (vsync)
+- dcfg |= DF_DCFG_VSYNC_EN;
+- writel(dcfg, par->df_regs + DF_DISPLAY_CFG);
++ /* Turn off the engine when we are in power down mode */
++ if (blank_mode == FB_BLANK_POWERDOWN) {
++ val = readl(par->df_regs + DF_MISC) | DF_MISC_DAC_PWRDN;
++ writel(val, par->df_regs + DF_MISC);
++
++ val = readl(par->dc_regs + DC_DISPLAY_CFG);
++ val &= ~DC_DCFG_TGEN;
++ writel(val, par->dc_regs + DC_DISPLAY_CFG);
++
++ udelay(1000);
++
++ val = readl(par->dc_regs + DC_GENERAL_CFG) & ~DC_GCFG_DFLE;
++ writel(val, par->dc_regs + DC_GENERAL_CFG);
++
++ val = readl(par->df_regs + DF_FP_PM);
++ writel(val & ~DF_FP_PM_P, par->df_regs + DF_FP_PM);
++ }
+
++ writel(0, par->dc_regs + DC_UNLOCK);
++
++ lx_blank_mode = blank_mode;
++ return 0;
++}
++
++static struct geoderegs saved_regs;
++
++static void lx_save_regs(struct fb_info *info, struct geoderegs *regs)
++{
++ struct lxfb_par *par = info->par;
++ int i;
++ u32 filt;
++
++ /* Wait for the command buffer to empty */
++ while(!(readl(par->gp_regs + 0x44) & (1 << 4)));
++
++ /* Unlock the DC */
++ writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
++
++ rdmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
++ rdmsrl(MSR_LX_GLCP_DOTPLL, regs->msr.dotpll);
++ rdmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
++ rdmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
++
++ writel(0x4758, par->dc_regs + 0x00);
++
++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
++ memcpy(regs->vp.b, par->df_regs, VP_REG_SIZE);
++ memcpy(regs->fp.b, par->df_regs + VP_FP_START, FP_REG_SIZE);
++
++ /* Save the palette */
++ writel(0, par->dc_regs + 0x70);
+ /* Power on/off flat panel */
++ for(i = 0; i < DC_PAL_SIZE; i++)
++ regs->pal[i] = readl(par->dc_regs + 0x74);
+
+- if (par->output & OUTPUT_PANEL) {
+- fp_pm = readl(par->df_regs + DF_FP_PM);
+- if (blank_mode == FB_BLANK_POWERDOWN)
+- fp_pm &= ~DF_FP_PM_P;
+- else
+- fp_pm |= DF_FP_PM_P;
+- writel(fp_pm, par->df_regs + DF_FP_PM);
++ /* save the filter coefficients */
++
++ filt = readl(par->dc_regs + 0x94);
++ filt |= DC_IRQFILT_H_FILT_SEL;
++
++ for(i = 0; i < DC_HFILT_SIZE; i++) {
++ writel((filt & 0xFFFFFF00) | i, par->dc_regs + 0x94);
++ regs->hcoeff[i << 1] = readl(par->dc_regs + 0x98);
++ regs->hcoeff[(i << 1) + 1] = readl(par->dc_regs + 0x9c);
++ }
++
++ filt &= ~DC_IRQFILT_H_FILT_SEL;
++
++ for(i = 0; i < DC_VFILT_SIZE; i++) {
++ writel((filt & 0xFFFFFF00) | i, par->dc_regs + 0x94);
++ regs->vcoeff[i] = readl(par->dc_regs + 0x98);
+ }
+
++ /* Save the vg filter coefficients */
++ for(i = 0; i < VP_COEFF_COUNT; i++)
++ regs->vp_coeff[i] =
++ readl(par->df_regs + 0x1000 + (i << 2));
++
++ /* Save the VP gamma */
++
++ writel(0, par->df_regs + 0x38);
++
++ for(i = 0; i <= 0xFF; i++)
++ regs->gamma[i] = readl(par->df_regs + 0x40);
++}
++
++static void lx_restore_dc(struct lxfb_par *par, struct geoderegs *regs)
++{
++ u32 filt;
++ int i;
++
++ /* Unlock the registers */
++ writel(DC_UNLOCK_CODE, par->dc_regs + 0x00);
++
++ /* Restore the framebuffer offset */
++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
++
++ /* Blank the configuration registers while we restore */
++ writel(0, par->dc_regs + 0x04);
++ writel(0, par->dc_regs + 0x08);
++
++ /* Restore the bulk of the registers */
++
++ writel(regs->dc.r.arb, par->dc_regs + 0x0C);
++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
++
++ /* skip 0x1c */
++
++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
++
++ writel(regs->dc.r.dctop, par->dc_regs + 0x2c);
++ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
++ writel(regs->dc.r.fbactive, par->dc_regs + 0x5c);
++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
++
++ /* skip 0x68, 0x6c, 0x70, 0x74, 0x78, 0x7c */
++
++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
++
++ /* 0x84 was written above */
++
++ writel(regs->dc.r.dv_ctl | 0x01, par->dc_regs + 0x88);
++ writel(regs->dc.r.gfx_scale, par->dc_regs + 0x90);
++ writel(regs->dc.r.irq_filt_ctl, par->dc_regs + 0x94);
++
++ /* skip 0x98, 0x9c */
++
++ writel(regs->dc.r.vbi_event_ctl, par->dc_regs + 0xA0);
++ writel(regs->dc.r.vbi_odd_ctl, par->dc_regs + 0xA4);
++ writel(regs->dc.r.vbi_hor, par->dc_regs + 0xA8);
++ writel(regs->dc.r.vbi_ln_odd, par->dc_regs + 0xAC);
++ writel(regs->dc.r.vbi_ln_event, par->dc_regs + 0xB0);
++ writel(regs->dc.r.vbi_pitch, par->dc_regs + 0xB4);
++ writel(regs->dc.r.clr_key, par->dc_regs + 0xB8);
++ writel(regs->dc.r.clr_key_mask, par->dc_regs + 0xBC);
++ writel(regs->dc.r.clr_key_x, par->dc_regs + 0xC0);
++ writel(regs->dc.r.clr_key_y, par->dc_regs + 0xC4);
++ writel(regs->dc.r.irq, par->dc_regs + 0xC8);
++ writel(regs->dc.r.genlk_ctrl, par->dc_regs + 0xD4);
++ writel(regs->dc.r.vid_even_y_st_offset, par->dc_regs + 0xD8);
++ writel(regs->dc.r.vid_even_u_st_offset, par->dc_regs + 0xDC);
++ writel(regs->dc.r.vid_even_v_st_offset, par->dc_regs + 0xE0);
++ writel(regs->dc.r.v_active_even_timing, par->dc_regs + 0xE4);
++ writel(regs->dc.r.v_blank_even_timing, par->dc_regs + 0xE8);
++ writel(regs->dc.r.v_sync_even_timing, par->dc_regs + 0xEC);
++
++ /* Restore the palette */
++ writel(0, par->dc_regs + 0x70);
++
++ for(i = 0; i < DC_PAL_SIZE; i++)
++ writel(regs->pal[i], par->dc_regs + 0x74);
++
++ /* Restore the horizontal filter coefficients */
++ filt = readl(par->dc_regs + 0x94);
++ filt |= DC_IRQFILT_H_FILT_SEL;
++
++ for(i = 0; i < DC_HFILT_SIZE; i++) {
++ writel(((filt & 0xFFFFFF00) | i), par->dc_regs + 0x94);
++ writel(regs->hcoeff[i << 1], par->dc_regs + 0x98);
++ writel(regs->hcoeff[(i << 1) + 1], par->dc_regs + 0x9c);
++ }
++
++ filt &= ~DC_IRQFILT_H_FILT_SEL;
++
++ for(i = 0; i < DC_VFILT_SIZE; i++) {
++ writel(((filt & 0xFFFFFF00) | i), par->dc_regs + 0x94);
++ writel(regs->vcoeff[i], par->dc_regs + 0x98);
++ }
++
++ /* Turn on the dotpll */
++ lx_set_dotpll((u32) (regs->msr.dotpll >> 32));
++
++ /* Restore MSRs */
++ wrmsrl(MSR_LX_DC_SPARE, regs->msr.dcspare);
++
++ /* Restore the configuration registers */
++
++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
++
++ /* Lock the DC again */
++ writel(0, par->dc_regs + 0x00);
++}
++
++static void lx_restore_vp(struct lxfb_par *par, struct geoderegs *regs)
++{
++ u32 val;
++ int i;
++
++ /* Restore MSRs */
++
++ wrmsrl(MSR_LX_DF_GLCONFIG, regs->msr.dfglcfg);
++ wrmsrl(MSR_LX_DF_PADSEL, regs->msr.padsel);
++
++ /* Restore the registers */
++
++ writel((u32) regs->vp.r.vx, par->df_regs + 0x10);
++ writel((u32) regs->vp.r.vy, par->df_regs + 0x18);
++ writel((u32) regs->vp.r.vs, par->df_regs + 0x20);
++ writel((u32) regs->vp.r.vck, par->df_regs + 0x28);
++ writel((u32) regs->vp.r.vcm, par->df_regs + 0x30);
++ /* skip 0x38 and 0x40 */
++ writel((u32) regs->vp.r.slr, par->df_regs + 0x48);
++ writel((u32) regs->vp.r.misc, par->df_regs + 0x50);
++ /* skip 0x58 */
++ writel((u32) regs->vp.r.vys, par->df_regs + 0x60);
++ writel((u32) regs->vp.r.vxs, par->df_regs + 0x68);
++ writel((u32) regs->vp.r.vde, par->df_regs + 0x98);
++ writel((u32) regs->vp.r.cck, par->df_regs + 0xA0);
++ writel((u32) regs->vp.r.ccm, par->df_regs + 0xA8);
++ writel((u32) regs->vp.r.cc1, par->df_regs + 0xB0);
++ writel((u32) regs->vp.r.cc2, par->df_regs + 0xB8);
++ writel((u32) regs->vp.r.a1x, par->df_regs + 0xC0);
++ writel((u32) regs->vp.r.a1y, par->df_regs + 0xC8);
++ writel((u32) regs->vp.r.a1c, par->df_regs + 0xD0);
++ writel((u32) regs->vp.r.a1t, par->df_regs + 0xD8);
++ writel((u32) regs->vp.r.a2x, par->df_regs + 0xE0);
++ writel((u32) regs->vp.r.a2y, par->df_regs + 0xE8);
++ writel((u32) regs->vp.r.a2c, par->df_regs + 0xF0);
++ writel((u32) regs->vp.r.a2t, par->df_regs + 0xF8);
++ writel((u32) regs->vp.r.a3x, par->df_regs + 0x100);
++ writel((u32) regs->vp.r.a3y, par->df_regs + 0x108);
++ writel((u32) regs->vp.r.a3c, par->df_regs + 0x110);
++ writel((u32) regs->vp.r.a3t, par->df_regs + 0x118);
++ writel((u32) regs->vp.r.vrr, par->df_regs + 0x120);
++ writel((u32) regs->vp.r.vye, par->df_regs + 0x138);
++ writel((u32) regs->vp.r.a1ye, par->df_regs + 0x140);
++ writel((u32) regs->vp.r.a2ye, par->df_regs + 0x148);
++ writel((u32) regs->vp.r.a3ye, par->df_regs + 0x150);
++
++ /* Panel */
++
++ writel((u32) regs->fp.r.pt1, par->df_regs + 0x400);
++ writel((u32) regs->fp.r.pt2, par->df_regs + 0x408);
++ writel((u32) regs->fp.r.dfc, par->df_regs + 0x418);
++
++ /* Restore panel power */
++
++ val = readl(par->df_regs + 0x410);
++
++ if (regs->fp.r.pm & (1 << 24)) {
++ if (!(val & 0x09))
++ writel(regs->fp.r.pm, par->df_regs + 0x410);
++ }
++ else {
++ if (!(val & 0x05))
++ writel(regs->fp.r.pm, par->df_regs + 0x410);
++ }
++
++ /* Restore the vp palette */
++
++ writel(0, par->df_regs + 0x38);
++
++ for(i = 0; i <= 0xFF; i++)
++ writel((u32) regs->gamma[i], par->df_regs + 0x40);
++
++ /* Restore filter coefficients */
++
++ for(i = 0; i < VP_COEFF_COUNT; i++)
++ writel(regs->vp_coeff[i],
++ par->df_regs + 0x1000 + (i << 2));
++
++ /* Restore the configuration registers */
++
++ writel((u32) regs->vp.r.dcfg, par->df_regs + 0x08);
++ writel((u32) regs->vp.r.vcfg, par->df_regs + 0x00);
++}
++
++static void lx_restore_gp(struct lxfb_par *par, struct geoderegs *regs)
++{
++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
++ writel(regs->gp.r.stride, par->gp_regs + 0x08);
++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
++
++ /* Writing to these registers would cause a blt to happen */
++ /* 0x38, 0x3c, 0x40 */
++
++ /* Status register (0x44) is read only */
++
++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
++ writel(regs->gp.r.cmd_top, par->gp_regs + 0x50);
++ writel(regs->gp.r.cmd_bot, par->gp_regs + 0x54);
++ writel(regs->gp.r.cmd_read, par->gp_regs + 0x58);
++ writel(regs->gp.r.cmd_write, par->gp_regs + 0x5C);
++ writel(regs->gp.r.ch3_offset, par->gp_regs + 0x60);
++ writel(regs->gp.r.ch3_mode_str, par->gp_regs + 0x64);
++ writel(regs->gp.r.ch3_width, par->gp_regs + 0x6C);
++ writel(regs->gp.r.ch3_hsrc, par->gp_regs + 0x70);
++
++ writel(regs->gp.r.int_cntrl, par->gp_regs + 0x70);
++}
++
++static void lx_restore_regs(struct fb_info *info, struct geoderegs *regs)
++{
++ struct lxfb_par *par = info->par;
++
++ lx_restore_gp(par, regs);
++ lx_restore_vp(par, regs);
++ lx_restore_dc(par, regs);
++}
++
++static int lx_power_on = 1;
++
++int lx_shutdown(struct fb_info *info)
++{
++ if (lx_power_on == 0)
++ return 0;
++
++ lx_save_regs(info, &saved_regs);
++ lx_graphics_disable(info);
++
++ lx_power_on = 0;
++ return 0;
++}
++
++int lx_powerup(struct fb_info *info)
++{
++ if (lx_power_on == 1)
++ return 0;
++
++ lx_restore_regs(info, &saved_regs);
++
++ lx_power_on = 1;
+ return 0;
+ }
+diff -purN linux_2.6.24_org/drivers/video/geode/Makefile linux_2.6.24_olpc/drivers/video/geode/Makefile
+--- linux_2.6.24_org/drivers/video/geode/Makefile 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/Makefile 2008-02-15 18:58:41.000000000 +0000
+@@ -5,5 +5,5 @@ obj-$(CONFIG_FB_GEODE_GX) += gxfb.o
+ obj-$(CONFIG_FB_GEODE_LX) += lxfb.o
+
+ gx1fb-objs := gx1fb_core.o display_gx1.o video_cs5530.o
+-gxfb-objs := gxfb_core.o display_gx.o video_gx.o
++gxfb-objs := gxfb_core.o display_gx.o video_gx.o suspend_gx.o
+ lxfb-objs := lxfb_core.o lxfb_ops.o
+diff -purN linux_2.6.24_org/drivers/video/geode/suspend_gx.c linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c
+--- linux_2.6.24_org/drivers/video/geode/suspend_gx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/geode/suspend_gx.c 2008-02-15 18:58:41.000000000 +0000
+@@ -0,0 +1,272 @@
++#include <linux/fb.h>
++#include <asm/io.h>
++#include <asm/msr.h>
++
++#include "geodefb.h"
++#include "video_gx.h"
++
++void gx_set_dotpll(struct fb_info *info, struct geoderegs *regs)
++{
++ int timeout = 1000;
++
++ u64 rstpll, dotpll;
++
++ rdmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
++ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
++
++ dotpll &= 0x00000000ffffffffull;
++ dotpll |= regs->msr.dotpll & 0xffffffff00000000ull;
++
++ dotpll |= MSR_GLCP_DOTPLL_DOTRESET;
++ dotpll &= ~MSR_GLCP_DOTPLL_BYPASS;
++
++ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
++
++ rstpll |= (regs->msr.rstpll &
++ ( MSR_GLCP_SYS_RSTPLL_DOTPREDIV2 |
++ MSR_GLCP_SYS_RSTPLL_DOTPREMULT2 |
++ MSR_GLCP_SYS_RSTPLL_DOTPOSTDIV3));
++
++ wrmsrl(MSR_GLCP_SYS_RSTPLL, rstpll);
++ dotpll &= ~(MSR_GLCP_DOTPLL_DOTRESET);
++ wrmsrl(MSR_GLCP_DOTPLL, dotpll);
++
++ do {
++ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
++ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
++}
++
++/* FIXME: Make sure nothing is read to clear */
++
++void gx_save_regs(struct fb_info *info, struct geoderegs *regs)
++{
++ struct geodefb_par *par = info->par;
++ int i;
++
++ /* Wait for the BLT engine to stop being busy */
++ while(readl(par->gp_regs + 0x44) & 0x05);
++
++ rdmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
++ rdmsrl(MSR_GLCP_DOTPLL, regs->msr.dotpll);
++ rdmsrl(MSR_GLCP_SYS_RSTPLL, regs->msr.rstpll);
++
++ writel(0x4758, par->dc_regs + 0x00);
++
++ memcpy(regs->gp.b, par->gp_regs, GP_REG_SIZE);
++ memcpy(regs->dc.b, par->dc_regs, DC_REG_SIZE);
++ memcpy(regs->vp.b, par->vid_regs, VP_REG_SIZE);
++ memcpy(regs->fp.b, par->vid_regs + 0x400, FP_REG_SIZE);
++
++ /* Save the palettes */
++ writel(0, par->dc_regs + 0x70);
++
++ for(i = 0; i < DC_PAL_SIZE; i++)
++ regs->pal[i] = readl(par->dc_regs + 0x74);
++
++ writel(0, par->vid_regs + 0x38);
++
++ for(i = 0; i < 0xFF; i++)
++ regs->gamma[i] = readl(par->vid_regs + 0x40);
++}
++
++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs)
++{
++ struct geodefb_par *par = info->par;
++ u32 val, i;
++
++ /* DOTPLL */
++ gx_set_dotpll(info, regs);
++
++ /* GP */
++
++ writel(regs->gp.r.dst_offset, par->gp_regs + 0x00);
++ writel(regs->gp.r.src_offset, par->gp_regs + 0x04);
++ writel(regs->gp.r.stride, par->gp_regs + 0x08);
++ writel(regs->gp.r.wid_height, par->gp_regs + 0x0C);
++ writel(regs->gp.r.src_color_fg, par->gp_regs + 0x10);
++ writel(regs->gp.r.src_color_bg, par->gp_regs + 0x14);
++ writel(regs->gp.r.pat_color_0, par->gp_regs + 0x18);
++ writel(regs->gp.r.pat_color_1, par->gp_regs + 0x1C);
++ writel(regs->gp.r.pat_color_2, par->gp_regs + 0x20);
++ writel(regs->gp.r.pat_color_3, par->gp_regs + 0x24);
++ writel(regs->gp.r.pat_color_4, par->gp_regs + 0x28);
++ writel(regs->gp.r.pat_color_5, par->gp_regs + 0x2C);
++ writel(regs->gp.r.pat_data_0, par->gp_regs + 0x30);
++ writel(regs->gp.r.pat_data_1, par->gp_regs + 0x34);
++
++ /* Don't write the raster / vector / blt mode regs */
++ /* status register is read only */
++
++ writel(regs->gp.r.hst_src, par->gp_regs + 0x48);
++ writel(regs->gp.r.base_offset, par->gp_regs + 0x4c);
++
++ /* DC */
++
++ /* Write the unlock value */
++ writel(0x4758, par->dc_regs + 0x00);
++
++ writel(0, par->dc_regs + 0x70);
++
++ for(i = 0; i < DC_PAL_SIZE; i++)
++ writel(regs->pal[i], par->dc_regs + 0x74);
++
++ /* Write the gcfg register without the enables */
++ writel(regs->dc.r.gcfg & ~0x0F, par->dc_regs + 0x04);
++
++ /* Write the vcfg register without the enables */
++ writel(regs->dc.r.dcfg & ~0x19, par->dc_regs + 0x08);
++
++ /* Write the rest of the active registers */
++
++ writel(regs->dc.r.fb_st_offset, par->dc_regs + 0x10);
++ writel(regs->dc.r.cb_st_offset, par->dc_regs + 0x14);
++ writel(regs->dc.r.curs_st_offset, par->dc_regs + 0x18);
++ writel(regs->dc.r.icon_st_offset, par->dc_regs + 0x1C);
++ writel(regs->dc.r.vid_y_st_offset, par->dc_regs + 0x20);
++ writel(regs->dc.r.vid_u_st_offset, par->dc_regs + 0x24);
++ writel(regs->dc.r.vid_v_st_offset, par->dc_regs + 0x28);
++ writel(regs->dc.r.line_size, par->dc_regs + 0x30);
++ writel(regs->dc.r.gfx_pitch, par->dc_regs + 0x34);
++ writel(regs->dc.r.vid_yuv_pitch, par->dc_regs + 0x38);
++ writel(regs->dc.r.h_active_timing, par->dc_regs + 0x40);
++ writel(regs->dc.r.h_blank_timing, par->dc_regs + 0x44);
++ writel(regs->dc.r.h_sync_timing, par->dc_regs + 0x48);
++ writel(regs->dc.r.v_active_timing, par->dc_regs + 0x50);
++ writel(regs->dc.r.v_blank_timing, par->dc_regs + 0x54);
++ writel(regs->dc.r.v_sync_timing, par->dc_regs + 0x58);
++ writel(regs->dc.r.dc_cursor_x, par->dc_regs + 0x60);
++ writel(regs->dc.r.dc_cursor_y, par->dc_regs + 0x64);
++ writel(regs->dc.r.dc_icon_x, par->dc_regs + 0x68);
++
++ /* Don't write the line_cnt or diag registers */
++
++ writel(regs->dc.r.dc_vid_ds_delta, par->dc_regs + 0x80);
++ writel(regs->dc.r.gliu0_mem_offset, par->dc_regs + 0x84);
++ writel(regs->dc.r.dv_acc, par->dc_regs + 0x8C);
++
++ /* VP */
++
++ /* MSR */
++ wrmsrl(GX_VP_MSR_PAD_SELECT, regs->msr.padsel);
++
++ writel(0, par->vid_regs + 0x38);
++
++ for(i = 0; i < 0xFF; i++)
++ writel((u32) regs->gamma[i], par->vid_regs + 0x40);
++
++ /* Don't enable video yet */
++ writel((u32) regs->vp.r.vcfg & ~0x01, par->vid_regs + 0x00);
++
++ /* Don't enable the CRT yet */
++ writel((u32) regs->vp.r.dcfg & ~0x0F, par->vid_regs + 0x08);
++
++ /* Write the rest of the VP registers */
++
++ writel((u32) regs->vp.r.vx, par->vid_regs + 0x10);
++ writel((u32) regs->vp.r.vy, par->vid_regs + 0x18);
++ writel((u32) regs->vp.r.vs, par->vid_regs + 0x20);
++ writel((u32) regs->vp.r.vck, par->vid_regs + 0x28);
++ writel((u32) regs->vp.r.vcm, par->vid_regs + 0x30);
++ writel((u32) regs->vp.r.misc, par->vid_regs + 0x50);
++ writel((u32) regs->vp.r.ccs, par->vid_regs + 0x58);
++ writel((u32) regs->vp.r.vdc, par->vid_regs + 0x78);
++ writel((u32) regs->vp.r.vco, par->vid_regs + 0x80);
++ writel((u32) regs->vp.r.crc, par->vid_regs + 0x88);
++ writel((u32) regs->vp.r.vde, par->vid_regs + 0x98);
++ writel((u32) regs->vp.r.cck, par->vid_regs + 0xA0);
++ writel((u32) regs->vp.r.ccm, par->vid_regs + 0xA8);
++ writel((u32) regs->vp.r.cc1, par->vid_regs + 0xB0);
++ writel((u32) regs->vp.r.cc2, par->vid_regs + 0xB8);
++ writel((u32) regs->vp.r.a1x, par->vid_regs + 0xC0);
++ writel((u32) regs->vp.r.a1y, par->vid_regs + 0xC8);
++ writel((u32) regs->vp.r.a1c, par->vid_regs + 0xD0);
++ writel((u32) regs->vp.r.a1t, par->vid_regs + 0xD8);
++ writel((u32) regs->vp.r.a2x, par->vid_regs + 0xE0);
++ writel((u32) regs->vp.r.a2y, par->vid_regs + 0xE8);
++ writel((u32) regs->vp.r.a2c, par->vid_regs + 0xF0);
++ writel((u32) regs->vp.r.a2t, par->vid_regs + 0xF8);
++ writel((u32) regs->vp.r.a3x, par->vid_regs + 0x100);
++ writel((u32) regs->vp.r.a3y, par->vid_regs + 0x108);
++ writel((u32) regs->vp.r.a3c, par->vid_regs + 0x110);
++ writel((u32) regs->vp.r.a3t, par->vid_regs + 0x118);
++ writel((u32) regs->vp.r.vrr, par->vid_regs + 0x120);
++
++
++ /* FP registers */
++
++ writel((u32) regs->fp.r.pt1, par->vid_regs + 0x400);
++ writel((u32) regs->fp.r.pt2, par->vid_regs + 0x408);
++
++ writel((u32) regs->fp.r.dfc, par->vid_regs + 0x418);
++ writel(regs->fp.r.blfsr, par->vid_regs + 0x420);
++ writel(regs->fp.r.rlfsr, par->vid_regs + 0x428);
++ writel(regs->fp.r.fmi, par->vid_regs + 0x430);
++ writel(regs->fp.r.fmd, par->vid_regs + 0x438);
++ writel(regs->fp.r.dca, par->vid_regs + 0x448);
++ writel(regs->fp.r.dmd, par->vid_regs + 0x450);
++ writel(regs->fp.r.crc, par->vid_regs + 0x458);
++ writel(regs->fp.r.fbb, par->vid_regs + 0x460);
++
++ /* Final enables */
++
++ val = readl(par->vid_regs + 0x410);
++
++ /* Control the panel */
++ if (regs->fp.r.pm & (1 << 24)) {
++
++ if (!(val & 0x09))
++ writel(regs->fp.r.pm, par->vid_regs + 0x410);
++ }
++ else {
++ if (!(val & 0x05))
++ writel(regs->fp.r.pm, par->vid_regs + 0x410);
++ }
++
++ /* Turn everything on */
++
++ writel(regs->dc.r.gcfg, par->dc_regs + 0x04);
++ writel((u32) regs->vp.r.vcfg, par->vid_regs + 0x00);
++ writel((u32) regs->vp.r.dcfg, par->vid_regs + 0x08);
++ writel(regs->dc.r.dcfg, par->dc_regs + 0x08);
++}
++
++
++#ifdef DEBUG
++
++void dump_regs(struct fb_info *info, int mode) {
++
++ struct geodefb_par *par = info->par;
++ u32 val;
++ int i;
++
++ if (mode == 0) {
++ for(i = 0; i < GP_REG_SIZE; i += 4) {
++ val = readl(par->gp_regs + i);
++ }
++ }
++
++ if (mode == 1) {
++ writel(0x4758, par->dc_regs + 0x00);
++
++ for(i = 0; i < DC_REG_SIZE; i += 4) {
++ val = readl(par->dc_regs + i);
++ printk("DC%x: %x\n", i, val);
++ }
++ }
++
++ if (mode == 2) {
++ for(i = 0; i < VP_REG_SIZE; i += 8) {
++ val = readl(par->vid_regs + i);
++ printk("VP%x: %x\n", i, val);
++ }
++ }
++
++ if (mode == 3) {
++ for(i = 0; i < FP_REG_SIZE; i += 8) {
++ val = readl(par->vid_regs + 0x400 + i);
++ printk("FP%x: %x\n", i, val);
++ }
++ }
++}
++
++#endif
+diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.c linux_2.6.24_olpc/drivers/video/geode/video_gx.c
+--- linux_2.6.24_org/drivers/video/geode/video_gx.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/video_gx.c 2008-02-15 18:58:41.000000000 +0000
+@@ -16,10 +16,14 @@
+ #include <asm/io.h>
+ #include <asm/delay.h>
+ #include <asm/msr.h>
++#include <asm/olpc.h>
+
+ #include "geodefb.h"
+ #include "video_gx.h"
++#include "display_gx.h"
+
++/* This structure is used to store the saved registers during suspend */
++static struct geoderegs gx_saved_regs;
+
+ /*
+ * Tables of register settings for various DOTCLKs.
+@@ -58,7 +62,7 @@ static const struct gx_pll_entry gx_pll_
+ { 13888, POSTDIV3, 0x000007E1 }, /* 72.0000 */
+ { 13426, PREMULT2, 0x00000F4A }, /* 74.4810 */
+ { 13333, 0, 0x00000052 }, /* 75.0000 */
+- { 12698, 0, 0x00000056 }, /* 78.7500 */
++ { 12698, 0, 0x00000056 }, /* 78.7500 */
+ { 12500, POSTDIV3|PREMULT2, 0x00000709 }, /* 80.0000 */
+ { 11135, PREMULT2, 0x00000262 }, /* 89.8000 */
+ { 10582, 0, 0x000002D2 }, /* 94.5000 */
+@@ -117,8 +121,9 @@ static const struct gx_pll_entry gx_pll_
+ { 4357, 0, 0x0000057D }, /* 229.5000 */
+ };
+
+-static void gx_set_dclk_frequency(struct fb_info *info)
++void gx_set_dclk_frequency(struct fb_info *info)
+ {
++ struct geodefb_par *par = info->par;
+ const struct gx_pll_entry *pll_table;
+ int pll_table_len;
+ int i, best_i;
+@@ -173,115 +178,169 @@ static void gx_set_dclk_frequency(struct
+ do {
+ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+ } while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
++
++ par->curdclk = pll_table[best_i].dotpll_value;
+ }
+
+-static void
+-gx_configure_tft(struct fb_info *info)
++/* Find out the current clock - we will use this information to avoid
++ re-programming it if we don't need to */
++
++unsigned int gx_get_dclk(struct fb_info *info)
+ {
+- struct geodefb_par *par = info->par;
+- unsigned long val;
+- unsigned long fp;
++ const struct gx_pll_entry *pll_table;
++ int pll_table_len;
++ u64 dotpll;
++ int i;
+
+- /* Set up the DF pad select MSR */
++ if (cpu_data(0).x86_mask == 1) {
++ pll_table = gx_pll_table_14MHz;
++ pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
++ } else {
++ pll_table = gx_pll_table_48MHz;
++ pll_table_len = ARRAY_SIZE(gx_pll_table_48MHz);
++ }
+
+- rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+- val &= ~GX_VP_PAD_SELECT_MASK;
+- val |= GX_VP_PAD_SELECT_TFT;
+- wrmsrl(GX_VP_MSR_PAD_SELECT, val);
++ rdmsrl(MSR_GLCP_DOTPLL, dotpll);
+
+- /* Turn off the panel */
++ for(i = 0; i < pll_table_len; i++) {
++ if (pll_table[i].dotpll_value == (u32) (dotpll >> 32))
++ break;
++ }
++
++ return (i == pll_table_len) ? 0 : pll_table[i].pixclock;
++}
+
+- fp = readl(par->vid_regs + GX_FP_PM);
+- fp &= ~GX_FP_PM_P;
+- writel(fp, par->vid_regs + GX_FP_PM);
+
+- /* Set timing 1 */
++#define CMP(val, mask, res) (((val) & (mask)) == (res))
+
+- fp = readl(par->vid_regs + GX_FP_PT1);
+- fp &= GX_FP_PT1_VSIZE_MASK;
+- fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+- writel(fp, par->vid_regs + GX_FP_PT1);
++static void
++gx_configure_tft(struct fb_info *info) {
+
+- /* Timing 2 */
+- /* Set bits that are always on for TFT */
++ struct geodefb_par *par = info->par;
++ u32 val, fp = 0, fp1, fp2, sync = 0;
+
+- fp = 0x0F100000;
++ /* Set up the DF pad select MSR */
+
+- /* Add sync polarity */
++ rdmsrl(GX_VP_MSR_PAD_SELECT, val);
++
++ if ((val & GX_VP_PAD_SELECT_MASK) != GX_VP_PAD_SELECT_TFT) {
++ val &= ~GX_VP_PAD_SELECT_MASK;
++ val |= GX_VP_PAD_SELECT_TFT;
++ wrmsrl(GX_VP_MSR_PAD_SELECT, val);
++ }
+
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+- fp |= GX_FP_PT2_VSP;
++ sync |= GX_FP_PT2_VSP;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+- fp |= GX_FP_PT2_HSP;
++ sync |= GX_FP_PT2_HSP;
+
+- writel(fp, par->vid_regs + GX_FP_PT2);
++ /* We only need to turn off the panel if something changed */
+
+- /* Set the dither control */
+- writel(0x70, par->vid_regs + GX_FP_DFC);
++ fp1 = readl(par->vid_regs + GX_FP_PT1);
++ fp2 = readl(par->vid_regs + GX_FP_PT2);
++
++ if (!CMP(fp1, GX_FP_PT1_VSIZE_MASK, info->var.yres << GX_FP_PT1_VSIZE_SHIFT) ||
++ (fp2 != (0x0F100000 | sync))) {
++
++ /* Turn off the panel */
++
++#ifdef NOTUSED
++ /* Do we really need to turn off the panel? */
++ /* Possibly - we have a glitch somewhere */
+
+- /* Enable the FP data and power (in case the BIOS didn't) */
++ fp = readl(par->vid_regs + GX_FP_PM);
++ fp &= ~GX_FP_PM_P;
++ writel(fp, par->vid_regs + GX_FP_PM);
++#endif
+
+- fp = readl(par->vid_regs + GX_DCFG);
+- fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+- writel(fp, par->vid_regs + GX_DCFG);
++ /* Timing 1 */
++ fp1 &= GX_FP_PT1_VSIZE_MASK;
++ fp1 |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
++ writel(fp, par->vid_regs + GX_FP_PT1);
+
+- /* Unblank the panel */
++ /* Timing 2 */
++ writel(0x0F100000 | sync, par->vid_regs + GX_FP_PT2);
++ }
++
++ /* Set the dither control */
++ if (readl(par->vid_regs + GX_FP_DFC) != 0x70) {
++ writel(0x70, par->vid_regs + GX_FP_DFC);
++ }
++
++ /* Turn on the panel */
+
+ fp = readl(par->vid_regs + GX_FP_PM);
+- fp |= GX_FP_PM_P;
+- writel(fp, par->vid_regs + GX_FP_PM);
++
++ if (!(fp & 0x09))
++ writel(fp | GX_FP_PM_P, par->vid_regs + GX_FP_PM);
+ }
+
++#define DCFG_DEFAULT_VAL GX_DCFG_CRT_SYNC_SKW_DFLT | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN | \
++GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN
++
+ static void gx_configure_display(struct fb_info *info)
+ {
+ struct geodefb_par *par = info->par;
+- u32 dcfg, misc;
++ u32 dcfg, misc, sync = 0;
+
+ /* Set up the MISC register */
+-
+ misc = readl(par->vid_regs + GX_MISC);
+
+- /* Power up the DAC */
+- misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++ /* We leave gamma enabled if it was already enabled.
++ Although the hardware enables it without setting
++ up the gamma table, the BIOS or bootloader ought
++ to have either disabled it or loaded a table by now */
+
+- /* Disable gamma correction */
+- misc |= GX_MISC_GAM_EN;
+
+- writel(misc, par->vid_regs + GX_MISC);
+
+- /* Write the display configuration */
+- dcfg = readl(par->vid_regs + GX_DCFG);
++ if (par->enable_crt) {
++ /* Power up the CRT DACs */
++ if (misc & ( GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN)) {
++ misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++ writel(misc, par->vid_regs + GX_MISC);
++ }
+
+- /* Disable hsync and vsync */
+- dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+- writel(dcfg, par->vid_regs + GX_DCFG);
++ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++ sync |= GX_DCFG_CRT_HSYNC_POL;
+
+- /* Clear bits from existing mode. */
+- dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
+- | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
+- | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
++ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++ sync |= GX_DCFG_CRT_VSYNC_POL;
++ }
++ else {
++ /* Turn off the CRT DACs in FP mode - we don't need them */
++ if ((misc & (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN))) {
++ misc |= (GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
++ writel(misc, par->vid_regs + GX_MISC);
++ }
++ }
+
+- /* Set default sync skew. */
+- dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
++ /* Write the display configuration */
++ dcfg = readl(par->vid_regs + GX_DCFG);
+
+- /* Enable hsync and vsync. */
+- dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
++ if (!CMP(dcfg, DCFG_DEFAULT_VAL | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL,
++ DCFG_DEFAULT_VAL | sync)) {
+
+- /* Sync polarities. */
+- if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+- dcfg |= GX_DCFG_CRT_HSYNC_POL;
+- if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+- dcfg |= GX_DCFG_CRT_VSYNC_POL;
++ /* Disable hsync and vsync */
++ dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
++ writel(dcfg, par->vid_regs + GX_DCFG);
+
+- /* Enable the display logic */
+- /* Set up the DACS to blank normally */
++ /* Clear bits from existing mode. */
++ dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
++ | GX_DCFG_CRT_HSYNC_POL | GX_DCFG_CRT_VSYNC_POL
++ | GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+
+- dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
++ /* Set default sync skew. */
++ dcfg |= GX_DCFG_CRT_SYNC_SKW_DFLT;
+
+- /* Enable the external DAC VREF? */
++ /* Enable hsync and vsync. */
++ dcfg |= GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN;
+
+- writel(dcfg, par->vid_regs + GX_DCFG);
++ /* Enable the display logic */
++ dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
++
++ writel(dcfg, par->vid_regs + GX_DCFG);
++ }
+
+ /* Set up the flat panel (if it is enabled) */
+
+@@ -289,6 +348,100 @@ static void gx_configure_display(struct
+ gx_configure_tft(info);
+ }
+
++int gxfb_powerdown(struct fb_info *info)
++{
++ struct geodefb_par *par = info->par;
++
++ /* We're already suspended */
++
++ if (par->state != FB_POWER_STATE_ON)
++ return 0;
++
++ /* Save the registers */
++ gx_save_regs(info, &gx_saved_regs);
++
++ /* Shut down the engine */
++
++ writel(gx_saved_regs.vp.r.vcfg & ~0x01, par->vid_regs + GX_VCFG);
++ writel(gx_saved_regs.vp.r.dcfg & ~0x0F, par->vid_regs + GX_DCFG);
++
++ /* Turn off the flat panel unless we are attached to a DCON */
++ if (!olpc_has_dcon())
++ writel(gx_saved_regs.fp.r.pm & ~GX_FP_PM_P, par->vid_regs + GX_FP_PM);
++
++ writel(0x4758, par->dc_regs + DC_UNLOCK);
++
++ writel(gx_saved_regs.dc.r.gcfg & ~0x0F,
++ par->dc_regs + DC_GENERAL_CFG);
++
++ writel(gx_saved_regs.dc.r.dcfg & ~0x19,
++ par->dc_regs + DC_DISPLAY_CFG);
++
++ par->state = FB_POWER_STATE_SUSPEND;
++
++ return 0;
++}
++
++int gxfb_powerup(struct fb_info *info)
++{
++ struct geodefb_par *par = info->par;
++ u32 val;
++
++ if (par->state == FB_POWER_STATE_SUSPEND) {
++
++ writel(gx_saved_regs.dc.r.dcfg,
++ par->dc_regs + DC_DISPLAY_CFG);
++
++ writel(gx_saved_regs.vp.r.vcfg, par->vid_regs + GX_VCFG);
++ writel(gx_saved_regs.vp.r.dcfg, par->vid_regs + GX_DCFG);
++
++ val = readl(par->vid_regs + GX_FP_PM);
++
++ /* power up the panel if it needs it; we don't always power it down */
++ if (!(val & 0x09)) {
++ writel(gx_saved_regs.fp.r.pm, par->vid_regs + GX_FP_PM);
++ mdelay(64);
++ }
++ }
++
++ /* If the panel is currently on its way up, then wait up to 100ms
++ for it */
++
++ if (readl(par->vid_regs + GX_FP_PM) & 0x08) {
++ int i;
++
++ for(i = 0; i < 10; i++) {
++ if (readl(par->vid_regs + GX_FP_PM) & 0x01)
++ break;
++
++ mdelay(10);
++ }
++
++ if (i == 10)
++ printk(KERN_ERR "gxfb: Panel power up timed out\n");
++ }
++
++ if (par->state == FB_POWER_STATE_ON)
++ return 0;
++
++ switch(par->state) {
++ case FB_POWER_STATE_OFF:
++ gx_restore_regs(info, &gx_saved_regs);
++ break;
++
++ case FB_POWER_STATE_SUSPEND:
++ /* Do this because it will turn on the FIFO which will
++ start the line count */
++ writel(gx_saved_regs.dc.r.gcfg,
++ par->dc_regs + DC_GENERAL_CFG);
++ writel(0x0, par->dc_regs + DC_UNLOCK);
++ break;
++ }
++
++ par->state = FB_POWER_STATE_ON;
++ return 0;
++}
++
+ static int gx_blank_display(struct fb_info *info, int blank_mode)
+ {
+ struct geodefb_par *par = info->par;
+@@ -315,6 +468,7 @@ static int gx_blank_display(struct fb_in
+ default:
+ return -EINVAL;
+ }
++
+ dcfg = readl(par->vid_regs + GX_DCFG);
+ dcfg &= ~(GX_DCFG_DAC_BL_EN
+ | GX_DCFG_HSYNC_EN | GX_DCFG_VSYNC_EN);
+@@ -326,7 +480,7 @@ static int gx_blank_display(struct fb_in
+ dcfg |= GX_DCFG_VSYNC_EN;
+ writel(dcfg, par->vid_regs + GX_DCFG);
+
+- /* Power on/off flat panel. */
++ /* Power on/off flat panel */
+
+ if (par->enable_crt == 0) {
+ fp_pm = readl(par->vid_regs + GX_FP_PM);
+@@ -340,8 +494,37 @@ static int gx_blank_display(struct fb_in
+ return 0;
+ }
+
++extern struct fb_info *gxfb_info;
++
++/* This function controls the flatpanel power sequencing - this is used
++ by the OLPC power management engine to enable the FP sequencing much
++ earlier in the resume process
++*/
++
++void gxfb_flatpanel_control(int state)
++{
++ struct geodefb_par *par = gxfb_info->par;
++ u32 val, fp = readl(par->vid_regs + GX_FP_PM);
++ val = fp;
++
++ /* Turn on the panel if it isn't aleady */
++
++ if (state) {
++ if (!(val & 0x01))
++ val |= GX_FP_PM_P;
++ }
++ else {
++ if (!(val & 0x02))
++ val &= ~GX_FP_PM_P;
++ }
++
++ if (val != fp)
++ writel(val, par->vid_regs + GX_FP_PM);
++}
++
+ struct geode_vid_ops gx_vid_ops = {
+ .set_dclk = gx_set_dclk_frequency,
++ .get_dclk = gx_get_dclk,
+ .configure_display = gx_configure_display,
+ .blank_display = gx_blank_display,
+ };
+diff -purN linux_2.6.24_org/drivers/video/geode/video_gx.h linux_2.6.24_olpc/drivers/video/geode/video_gx.h
+--- linux_2.6.24_org/drivers/video/geode/video_gx.h 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/geode/video_gx.h 2008-02-15 18:58:41.000000000 +0000
+@@ -11,6 +11,8 @@
+ #ifndef __VIDEO_GX_H__
+ #define __VIDEO_GX_H__
+
++#include "geode_regs.h"
++
+ extern struct geode_vid_ops gx_vid_ops;
+
+ /* GX Flatpanel control MSR */
+@@ -20,6 +22,8 @@ extern struct geode_vid_ops gx_vid_ops;
+
+ /* Geode GX video processor registers */
+
++#define GX_VCFG 0x0000
++
+ #define GX_DCFG 0x0008
+ # define GX_DCFG_CRT_EN 0x00000001
+ # define GX_DCFG_HSYNC_EN 0x00000002
+@@ -42,6 +46,14 @@ extern struct geode_vid_ops gx_vid_ops;
+ #define GX_MISC_DAC_PWRDN 0x00000400
+ #define GX_MISC_A_PWRDN 0x00000800
+
++/* Gamma correction RAM - address and data registers */
++
++#define GX_GAR 0x038
++#define GX_GDR 0x040
++
++#define GXFB_GAMMA_DWORDS 256 /* number of dwords in the gamma ram */
++#define GXFB_GAMMA_SIZE (GXFB_GAMMA_DWORDS * sizeof(unsigned int))
++
+ /* Geode GX flat panel display control registers */
+
+ #define GX_FP_PT1 0x0400
+@@ -69,4 +81,13 @@ extern struct geode_vid_ops gx_vid_ops;
+ # define MSR_GLCP_DOTPLL_BYPASS (0x0000000000008000ull)
+ # define MSR_GLCP_DOTPLL_LOCK (0x0000000002000000ull)
+
++int gxfb_powerdown(struct fb_info *info);
++int gxfb_powerup(struct fb_info *info);
++
++void gx_set_dclk_frequency(struct fb_info *info);
++unsigned int gx_get_dclk(struct fb_info *info);
++
++void gx_save_regs(struct fb_info *info, struct geoderegs *regs);
++void gx_restore_regs(struct fb_info *info, struct geoderegs *regs);
++
+ #endif /* !__VIDEO_GX_H__ */
+diff -purN linux_2.6.24_org/drivers/video/Kconfig linux_2.6.24_olpc/drivers/video/Kconfig
+--- linux_2.6.24_org/drivers/video/Kconfig 2008-02-15 20:11:22.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/Kconfig 2008-02-15 18:58:36.000000000 +0000
+@@ -1869,6 +1869,15 @@ config FB_PS3_DEFAULT_SIZE_M
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
++config FB_OLPC_DCON
++ tristate "One Laptop Per Child Display CONtroller support"
++ depends on OLPC
++ select I2C
++ ---help---
++ Add support for the OLPC DCON controller. This controller is only
++ available on OLPC platforms. Unless you have one of these
++ platforms, you will want to say 'N'.
++
+ config FB_XILINX
+ tristate "Xilinx frame buffer support"
+ depends on FB && XILINX_VIRTEX
+diff -purN linux_2.6.24_org/drivers/video/Makefile linux_2.6.24_olpc/drivers/video/Makefile
+--- linux_2.6.24_org/drivers/video/Makefile 2008-02-15 20:11:22.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/Makefile 2008-02-15 18:58:36.000000000 +0000
+@@ -111,6 +111,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx
+ obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
+ obj-$(CONFIG_FB_PS3) += ps3fb.o
+ obj-$(CONFIG_FB_SM501) += sm501fb.o
++obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon.o
+ obj-$(CONFIG_FB_XILINX) += xilinxfb.o
+ obj-$(CONFIG_FB_OMAP) += omap/
+
+diff -purN linux_2.6.24_org/drivers/video/modedb.c linux_2.6.24_olpc/drivers/video/modedb.c
+--- linux_2.6.24_org/drivers/video/modedb.c 2008-02-15 20:11:23.000000000 +0000
++++ linux_2.6.24_olpc/drivers/video/modedb.c 2008-02-15 18:58:41.000000000 +0000
+@@ -33,6 +33,8 @@ const char *fb_mode_option;
+ * Standard video mode definitions (taken from XFree86)
+ */
+
++#define DEFAULT_MODEDB_INDEX 0
++
+ static const struct fb_videomode modedb[] = {
+ {
+ /* 640x400 @ 70 Hz, 31.5 kHz hsync */
+@@ -508,7 +510,8 @@ int fb_find_mode(struct fb_var_screeninf
+ }
+
+ if (!default_mode)
+- default_mode = &db[0];
++ default_mode = (db == modedb) ?
++ &modedb[DEFAULT_MODEDB_INDEX] : &db[0];
+
+ if (!default_bpp)
+ default_bpp = 8;
+diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.c linux_2.6.24_olpc/drivers/video/olpc_dcon.c
+--- linux_2.6.24_org/drivers/video/olpc_dcon.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/olpc_dcon.c 2008-02-15 18:58:42.000000000 +0000
+@@ -0,0 +1,946 @@
++/*
++ * Mainly by David Woodhouse, somewhat modified by Jordan Crouse
++ *
++ * Copyright © 2006-2007 Red Hat, Inc.
++ * Copyright © 2006-2007 Advanced Micro Devices, Inc.
++ *
++ * This program is free software. You can redistribute it and/or
++ * modify it under the terms of version 2 of the GNU General Public
++ * License as published by the Free Software Foundation.
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/fb.h>
++#include <linux/console.h>
++#include <linux/i2c.h>
++#include <linux/platform_device.h>
++#include <linux/i2c-id.h>
++#include <linux/pci.h>
++#include <linux/vt_kern.h>
++#include <linux/pci_ids.h>
++#include <linux/interrupt.h>
++#include <linux/delay.h>
++#include <linux/backlight.h>
++#include <linux/device.h>
++#include <linux/notifier.h>
++#include <asm/uaccess.h>
++#include <linux/ctype.h>
++#include <linux/reboot.h>
++#include <asm/tsc.h>
++#include <asm/olpc.h>
++#include <asm/geode.h>
++
++#include "olpc_dcon.h"
++
++/* Module definitions */
++
++static int resumeline = 898;
++module_param(resumeline, int, 0444);
++
++static int noinit;
++module_param(noinit, int, 0444);
++
++/* Default off since it doesn't work on DCON ASIC in B-test OLPC board */
++static int useaa = 1;
++module_param(useaa, int, 0444);
++
++/* I2C structures */
++
++static struct i2c_driver dcon_driver;
++static struct i2c_client *dcon_client;
++
++/* Platform devices */
++static struct platform_device *dcon_device;
++
++/* Backlight device */
++static struct backlight_device *dcon_bl_dev;
++
++/* Base address of the GPIO registers */
++static unsigned long gpio_base;
++
++static struct fb_info *fbinfo;
++
++/* Current source, initialized at probe time */
++static int dcon_source;
++
++/* Desired source */
++static int dcon_pending;
++
++/* Current output type */
++static int dcon_output = DCON_OUTPUT_COLOR;
++
++/* Current sleep status (not yet implemented) */
++static int dcon_sleep_val = DCON_ACTIVE;
++
++/* Shadow register for the DCON_REG_MODE register */
++static unsigned short dcon_disp_mode;
++
++/* Variables used during switches */
++static int dcon_switched;
++
++static DECLARE_WAIT_QUEUE_HEAD(dcon_wait_queue);
++
++static unsigned short normal_i2c[] = { 0x0D, I2C_CLIENT_END };
++I2C_CLIENT_INSMOD;
++
++#define dcon_write(reg,val) i2c_smbus_write_word_data(dcon_client,reg,val)
++#define dcon_read(reg) i2c_smbus_read_word_data(dcon_client,reg)
++
++/* The current backlight value - this saves us some smbus traffic */
++static int bl_val = -1;
++
++/* ===== API functions - these are called by a variety of users ==== */
++
++static int dcon_request_irq(void);
++
++static int dcon_hw_init(struct i2c_client *client, int is_init)
++{
++ uint16_t ver;
++ int rc = 0;
++
++ ver = i2c_smbus_read_word_data(client, DCON_REG_ID);
++ if ((ver >> 8) != 0xDC) {
++ printk(KERN_ERR "olpc-dcon: DCON ID not 0xDCxx: 0x%04x "
++ "instead.\n", ver);
++ rc = -ENXIO;
++ goto err;
++ }
++
++ if (is_init) {
++ printk(KERN_INFO "olpc-dcon: Discovered DCON version %x\n",
++ ver & 0xFF);
++ if ((rc = dcon_request_irq())) {
++ printk(KERN_ERR "olpc-dcon: Unable to grab IRQ.\n");
++ goto err;
++ }
++ }
++
++ if (ver < 0xdc02 && !noinit) {
++ /* Initialize the DCON registers */
++
++ /* Start with work-arounds for DCON ASIC */
++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
++ i2c_smbus_write_word_data(client, 0x4b, 0x00cc);
++ i2c_smbus_write_word_data(client, 0x0b, 0x007a);
++ i2c_smbus_write_word_data(client, 0x36, 0x025c);
++ i2c_smbus_write_word_data(client, 0x37, 0x025e);
++
++ /* Initialise SDRAM */
++
++ i2c_smbus_write_word_data(client, 0x3b, 0x002b);
++ i2c_smbus_write_word_data(client, 0x41, 0x0101);
++ i2c_smbus_write_word_data(client, 0x42, 0x0101);
++ }
++ else if (!noinit) {
++ /* SDRAM setup/hold time */
++ i2c_smbus_write_word_data(client, 0x3a, 0xc040);
++ i2c_smbus_write_word_data(client, 0x41, 0x0000);
++ i2c_smbus_write_word_data(client, 0x41, 0x0101);
++ i2c_smbus_write_word_data(client, 0x42, 0x0101);
++ }
++
++ /* Colour swizzle, AA, no passthrough, backlight */
++ if (is_init) {
++ dcon_disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | MODE_CSWIZZLE;
++ if (useaa)
++ dcon_disp_mode |= MODE_COL_AA;
++ }
++ i2c_smbus_write_word_data(client, DCON_REG_MODE, dcon_disp_mode);
++
++
++ /* Set the scanline to interrupt on during resume */
++
++ i2c_smbus_write_word_data(client, DCON_REG_SCAN_INT, resumeline);
++
++err:
++ return rc;
++}
++
++/*
++ * The smbus doesn't always come back due to what is believed to be
++ * hardware (power rail) bugs. For older models where this is known to
++ * occur, our solution is to attempt to wait for the bus to stabilize;
++ * if it doesn't happen, cut power to the dcon, repower it, and wait
++ * for the bus to stabilize. Rinse, repeat until we have a working
++ * smbus. For newer models, we simply BUG(); we want to know if this
++ * still happens despite the power fixes that have been made!
++ */
++static int dcon_bus_stabilize(struct i2c_client *client, int is_powered_down)
++{
++ unsigned long timeout;
++ int x;
++
++power_up:
++ if (is_powered_down) {
++ x = 1;
++ if ((x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0))) {
++ printk(KERN_WARNING "olpc-dcon: unable to force dcon "
++ "to power up: %d!\n", x);
++ return x;
++ }
++ msleep(10); /* we'll be conservative */
++ }
++
++ /*
++ * According to HiMax, when powering the DCON up we should hold
++ * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON
++ * state machine to reset to a (sane) initial state. Mitch Bradley
++ * did some testing and discovered that holding for 16 SMB_CLK cycles
++ * worked a lot more reliably, so that's what we do here.
++ *
++ * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must
++ * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and
++ * GPIO15.
++ */
++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL);
++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE);
++ geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1);
++ geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2);
++ geode_gpio_clear(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1);
++
++ for (x = 0; x < 16; x++) {
++ udelay(5);
++ geode_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
++ udelay(5);
++ geode_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL);
++ }
++ udelay(5);
++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1);
++ geode_gpio_set(OLPC_GPIO_SMB_CLK|OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1);
++
++ for (x = -1, timeout = 50; timeout && x < 0; timeout--) {
++ msleep(1);
++ x = dcon_read(DCON_REG_ID);
++ }
++ if (x < 0) {
++ printk(KERN_ERR "olpc-dcon: unable to stabilize dcon's "
++ "smbus, reasserting power and praying.\n");
++ BUG_ON(olpc_board_at_least(olpc_board(0xc2)));
++ x = 0;
++ olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
++ msleep(100);
++ is_powered_down = 1;
++ goto power_up; /* argh, stupid hardware.. */
++ }
++
++ if (is_powered_down)
++ return dcon_hw_init(client, 0);
++ return 0;
++}
++
++
++/* Backlight notes - turning off the backlight enable bit in the DCON
++ * doesn't save us any power over just pushing the BL to zero, so we
++ * don't use that bit in this code.
++ */
++
++static int dcon_get_backlight(void)
++{
++ if (dcon_client == NULL)
++ return 0;
++
++ if (bl_val == -1)
++ bl_val = dcon_read(DCON_REG_BRIGHT) & 0x0F;
++
++ return bl_val;
++}
++
++static void dcon_set_backlight(int level)
++{
++ if (dcon_client == NULL)
++ return;
++
++ if (bl_val == (level & 0x0F))
++ return;
++
++ bl_val = level & 0x0F;
++ dcon_write(DCON_REG_BRIGHT, bl_val);
++
++ /* Purposely turn off the backlight when we go to level 0 */
++
++ if (bl_val == 0) {
++ dcon_disp_mode &= ~MODE_BL_ENABLE;
++ dcon_write(DCON_REG_MODE, dcon_disp_mode);
++ }
++ else if (!(dcon_disp_mode & MODE_BL_ENABLE)) {
++ dcon_disp_mode |= MODE_BL_ENABLE;
++ dcon_write(DCON_REG_MODE, dcon_disp_mode);
++ }
++}
++
++/* Set the output type to either color or mono */
++
++static int dcon_set_output(int arg)
++{
++ if (dcon_output == arg)
++ return 0;
++
++ dcon_output = arg;
++
++ if (arg == DCON_OUTPUT_MONO) {
++ dcon_disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA);
++ dcon_disp_mode |= MODE_MONO_LUMA;
++ }
++ else {
++ dcon_disp_mode &= ~(MODE_MONO_LUMA);
++ dcon_disp_mode |= MODE_CSWIZZLE;
++ if (useaa)
++ dcon_disp_mode |= MODE_COL_AA;
++ }
++
++ dcon_write(DCON_REG_MODE, dcon_disp_mode);
++ return 0;
++}
++
++/* For now, this will be really stupid - we need to address how
++ * DCONLOAD works in a sleep and account for it accordingly
++ */
++
++static void dcon_sleep(int state)
++{
++ int x;
++
++ /* Turn off the backlight and put the DCON to sleep */
++
++ if (state == dcon_sleep_val)
++ return;
++
++ if (!olpc_board_at_least(olpc_board(0xc2)))
++ return;
++
++ if (state == DCON_SLEEP) {
++ x = 0;
++ if ((x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0)))
++ printk(KERN_WARNING "olpc-dcon: unable to force dcon "
++ "to power down: %d!\n", x);
++ else
++ dcon_sleep_val = state;
++ }
++ else {
++ /* Only re-enable the backlight if the backlight value is set */
++ if (bl_val != 0)
++ dcon_disp_mode |= MODE_BL_ENABLE;
++
++ if ((x=dcon_bus_stabilize(dcon_client, 1)))
++ printk(KERN_WARNING "olpc-dcon: unable to reinit dcon"
++ " hardware: %d!\n", x);
++ else
++ dcon_sleep_val = state;
++ }
++
++ /* We should turn off some stuff in the framebuffer - but what? */
++}
++
++/* Set the source of the display (CPU or DCON) */
++
++static void dcon_source_switch(struct work_struct *work)
++{
++ DECLARE_WAITQUEUE(wait, current);
++ int source = dcon_pending;
++
++ if (dcon_source == source)
++ return;
++
++ dcon_switched = 0;
++
++ switch (source) {
++ case DCON_SOURCE_CPU:
++
++ /* Enable the scanline interrupt bit */
++ if (dcon_write(DCON_REG_MODE, dcon_disp_mode | MODE_SCAN_INT))
++ printk(KERN_ERR "olpc-dcon: couldn't enable scanline interrupt!\n");
++ else {
++ /* Wait up to one second for the scanline interrupt */
++ wait_event_timeout(dcon_wait_queue, dcon_switched == 1, HZ);
++ }
++
++ if (!dcon_switched)
++ printk(KERN_ERR "olpc-dcon: Timeout entering CPU mode; expect a screen glitch.\n");
++
++ /*
++ * Ideally we'd like to disable interrupts here so that the
++ * fb unblanking and DCON turn on happen at a known time value;
++ * however, we can't do that right now with fb_blank
++ * messing with semaphores.
++ *
++ * For now, we just hope..
++ */
++ acquire_console_sem();
++ if (fb_blank(fbinfo, FB_BLANK_UNBLANK)) {
++ release_console_sem();
++ printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n");
++ dcon_pending = DCON_SOURCE_DCON;
++ return;
++ }
++ release_console_sem();
++
++ /* And turn off the DCON */
++ outl(1<<11, gpio_base + GPIOx_OUT_VAL);
++
++ /* Turn off the scanline interrupt */
++ if (dcon_write(DCON_REG_MODE, dcon_disp_mode))
++ printk(KERN_ERR "olpc-dcon: couldn't disable scanline interrupt!\n");
++
++ printk(KERN_INFO "olpc-dcon: The CPU has control\n");
++ break;
++ case DCON_SOURCE_DCON:
++ {
++ int t;
++
++ add_wait_queue(&dcon_wait_queue, &wait);
++ set_current_state(TASK_UNINTERRUPTIBLE);
++
++ /* Clear GPIO11 (DCONLOAD) - this implies that the DCON is in
++ control */
++
++ outl(1 << (11 + 16), gpio_base + GPIOx_OUT_VAL);
++
++ t = schedule_timeout(HZ/2);
++ remove_wait_queue(&dcon_wait_queue, &wait);
++ set_current_state(TASK_RUNNING);
++
++ if (!dcon_switched)
++ printk(KERN_ERR "olpc-dcon: Timeout entering DCON mode; expect a screen glitch.\n");
++
++ acquire_console_sem();
++ if (fb_blank(fbinfo, FB_BLANK_POWERDOWN))
++ printk(KERN_ERR "olpc-dcon: couldn't blank fb!\n");
++ release_console_sem();
++
++ printk(KERN_INFO "olpc-dcon: The DCON has control\n");
++ break;
++ }
++ default:
++ BUG();
++ }
++
++ dcon_source = source;
++}
++
++static DECLARE_WORK(dcon_work, dcon_source_switch);
++
++static int dcon_set_source(int arg)
++{
++ if (arg != DCON_SOURCE_CPU && arg != DCON_SOURCE_DCON)
++ return -EINVAL;
++
++ if (dcon_pending == arg)
++ return 0;
++
++ dcon_pending = arg;
++ if ((dcon_source != arg) && !work_pending(&dcon_work))
++ schedule_work(&dcon_work);
++
++ return 0;
++}
++
++static int dcon_set_source_sync(int arg)
++{
++ int ret = dcon_set_source(arg);
++ if (!ret)
++ flush_scheduled_work();
++ return ret;
++}
++
++static int dconbl_set(struct backlight_device *dev) {
++
++ int level = dev->props.brightness;
++
++ if (dev->props.power != FB_BLANK_UNBLANK)
++ level = 0;
++
++ dcon_set_backlight(level);
++ return 0;
++}
++
++static int dconbl_get(struct backlight_device *dev) {
++ return dcon_get_backlight();
++}
++
++static ssize_t dcon_mode_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%4.4X\n", dcon_disp_mode);
++}
++
++static ssize_t dcon_sleep_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%d\n", dcon_sleep_val);
++}
++
++static ssize_t /* __deprecated */ dcon_source_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
++ return sprintf(buf, "%d\n", dcon_source);
++}
++
++static ssize_t dcon_freeze_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%d\n", dcon_source == DCON_SOURCE_DCON ? 1 : 0);
++}
++
++static ssize_t dcon_output_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%d\n", dcon_output);
++}
++
++static ssize_t dcon_resumeline_show(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ return sprintf(buf, "%d\n", resumeline);
++}
++
++static int _strtoul(const char *buf, int len, unsigned int *val)
++{
++
++ char *endp;
++ unsigned int output = simple_strtoul(buf, &endp, 0);
++ int size = endp - buf;
++
++ if (*endp && isspace(*endp))
++ size++;
++
++ if (size != len)
++ return -EINVAL;
++
++ *val = output;
++ return 0;
++}
++
++static ssize_t dcon_output_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ int output;
++ int rc = -EINVAL;
++
++ if (_strtoul(buf, count, &output))
++ return -EINVAL;
++
++ if (output == DCON_OUTPUT_COLOR || output == DCON_OUTPUT_MONO) {
++ dcon_set_output(output);
++ rc = count;
++ }
++
++ return rc;
++}
++
++static ssize_t /* __deprecated */ dcon_source_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ int output;
++ int rc = -EINVAL;
++
++ printk(KERN_WARNING "olpc-dcon: using deprecated sysfs 'source' interface; use 'freeze' instead!\n");
++ if (_strtoul(buf, count, &output))
++ return -EINVAL;
++
++ dcon_set_source(output);
++ rc = count;
++
++ return rc;
++}
++
++static ssize_t dcon_freeze_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ int output;
++ int rc = -EINVAL;
++
++ if (_strtoul(buf, count, &output))
++ return rc;
++
++ dcon_set_source(output ? DCON_SOURCE_DCON : DCON_SOURCE_CPU);
++ rc = count;
++
++ return rc;
++}
++
++static ssize_t dcon_resumeline_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ int rl;
++ int rc = -EINVAL;
++
++ if (_strtoul(buf, count, &rl))
++ return rc;
++
++ resumeline = rl;
++ dcon_write(DCON_REG_SCAN_INT, resumeline);
++ rc = count;
++
++ return rc;
++}
++
++static ssize_t dcon_sleep_store(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ int output;
++
++ if (_strtoul(buf, count, &output))
++ return -EINVAL;
++
++ dcon_sleep(output ? DCON_SLEEP : DCON_ACTIVE);
++ return count;
++}
++
++static struct device_attribute dcon_device_files[] = {
++ __ATTR(mode, 0444, dcon_mode_show, NULL),
++ __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store),
++ __ATTR(source, 0644, dcon_source_show, dcon_source_store),
++ __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store),
++ __ATTR(output, 0644, dcon_output_show, dcon_output_store),
++ __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
++};
++
++static struct backlight_ops dcon_bl_ops = {
++ .get_brightness = dconbl_get,
++ .update_status = dconbl_set
++};
++
++/* List of GPIOs that we care about:
++ (in) GPIO12 -- DCONBLNK
++ (in) GPIO[56] -- DCONSTAT[01]
++ (out) GPIO11 -- DCONLOAD
++*/
++
++#define IN_GPIOS ((1<<5) | (1<<6) | (1<<7) | (1<<12))
++#define OUT_GPIOS (1<<11)
++
++static irqreturn_t dcon_interrupt(int, void *);
++
++static int dcon_request_irq(void)
++{
++ unsigned long lo, hi;
++ unsigned char lob;
++
++ rdmsr(MSR_LBAR_GPIO, lo, hi);
++
++ /* Check the mask and whether GPIO is enabled (sanity check) */
++ if (hi != 0x0000f001) {
++ printk(KERN_ERR "GPIO not enabled -- cannot use DCON\n");
++ return -ENODEV;
++ }
++
++ /* Mask off the IO base address */
++ gpio_base = lo & 0x0000ff00;
++
++ /* Turn off the event enable for GPIO7 just to be safe */
++ outl(1 << (16+7), gpio_base + GPIOx_EVNT_EN);
++
++ /* Set the directions for the GPIO pins */
++ outl(OUT_GPIOS | (IN_GPIOS << 16), gpio_base + GPIOx_OUT_EN);
++ outl(IN_GPIOS | (OUT_GPIOS << 16), gpio_base + GPIOx_IN_EN);
++
++ /* Set up the interrupt mappings */
++
++ /* Set the IRQ to pair 2 */
++ geode_gpio_event_irq(OLPC_GPIO_DCON_IRQ, 2);
++
++ /* Enable group 2 to trigger the DCON interrupt */
++ geode_gpio_set_irq(2, DCON_IRQ);
++
++ /* Select edge level for interrupt (in PIC) */
++
++ lob = inb(0x4d0);
++ lob &= ~(1 << DCON_IRQ);
++ outb(lob, 0x4d0);
++
++ /* Register the interupt handler */
++ if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", &dcon_driver))
++ return -EIO;
++
++ /* Clear INV_EN for GPIO7 (DCONIRQ) */
++ outl((1<<(16+7)), gpio_base + GPIOx_INV_EN);
++
++ /* Enable filter for GPIO12 (DCONBLANK) */
++ outl(1<<(12), gpio_base + GPIOx_IN_FLTR_EN);
++
++ /* Disable filter for GPIO7 */
++ outl(1<<(16+7), gpio_base + GPIOx_IN_FLTR_EN);
++
++ /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
++
++ outl(1<<(16+7), gpio_base + GPIOx_EVNTCNT_EN);
++ outl(1<<(16+12), gpio_base + GPIOx_EVNTCNT_EN);
++
++ /* Add GPIO12 to the Filter Event Pair #7 */
++ outb(12, gpio_base + GPIO_FE7_SEL);
++
++ /* Turn off negative Edge Enable for GPIO12 */
++ outl(1<<(16+12), gpio_base + GPIOx_NEGEDGE_EN);
++
++ /* Enable negative Edge Enable for GPIO7 */
++ outl(1<<7, gpio_base + GPIOx_NEGEDGE_EN);
++
++ /* Zero the filter amount for Filter Event Pair #7 */
++ outw(0, gpio_base + GPIO_FLT7_AMNT);
++
++ /* Clear the negative edge status for GPIO7 and GPIO12 */
++ outl((1<<7) | (1<<12), gpio_base+0x4c);
++
++ /* FIXME: Clear the posiitive status as well, just to be sure */
++ outl((1<<7) | (1<<12), gpio_base+0x48);
++
++ /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */
++ outl((1<<(7))|(1<<12), gpio_base + GPIOx_EVNT_EN);
++
++ /* Determine the current state by reading the GPIO bit */
++ /* Earlier stages of the boot process have established the state */
++ dcon_source = inl(gpio_base + GPIOx_OUT_VAL) & (1<<11)
++ ? DCON_SOURCE_CPU
++ : DCON_SOURCE_DCON;
++ dcon_pending = dcon_source;
++
++ return 0;
++}
++
++static int dcon_reboot_notify(struct notifier_block *nb, unsigned long foo, void *bar)
++{
++ if (dcon_client == NULL)
++ return 0;
++
++ /* Turn off the DCON. Entirely. */
++ dcon_write(DCON_REG_MODE, 0x39);
++ dcon_write(DCON_REG_MODE, 0x32);
++ return 0;
++}
++
++static int dcon_conswitch_notify(struct notifier_block *nb,
++ unsigned long mode, void *dummy)
++{
++ if (mode == CONSOLE_EVENT_SWITCH_TEXT)
++ dcon_sleep(DCON_ACTIVE);
++
++ return 0;
++}
++
++static struct notifier_block dcon_nb = {
++ .notifier_call = dcon_reboot_notify,
++ .priority = -1,
++};
++
++static struct notifier_block dcon_console_nb = {
++ .notifier_call = dcon_conswitch_notify,
++ .priority = -1,
++};
++
++static int unfreeze_on_panic(struct notifier_block *nb, unsigned long e, void *p)
++{
++ outl(1<<11, gpio_base + GPIOx_OUT_VAL);
++ return NOTIFY_DONE;
++}
++
++static struct notifier_block dcon_panic_nb = {
++ .notifier_call = unfreeze_on_panic,
++};
++
++static int dcon_probe(struct i2c_adapter *adap, int addr, int kind)
++{
++ struct i2c_client *client;
++ int rc, i;
++
++ if (!olpc_has_dcon()) {
++ printk("olpc-dcon: No DCON is attached.\n");
++ return -ENODEV;
++ }
++
++ if (num_registered_fb >= 1)
++ fbinfo = registered_fb[0];
++
++ if (adap->id != I2C_HW_SMBUS_SCX200) {
++ printk(KERN_ERR "olpc-dcon: Invalid I2C bus (%d not %d)\n",
++ adap->id, I2C_HW_SMBUS_SCX200);
++ return -ENXIO;
++ }
++
++ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
++ if (client == NULL)
++ return -ENOMEM;
++
++ strncpy(client->name, "OLPC-DCON", I2C_NAME_SIZE);
++ client->addr = addr;
++ client->adapter = adap;
++ client->driver = &dcon_driver;
++
++ if ((rc = i2c_attach_client(client)) != 0) {
++ printk(KERN_ERR "olpc-dcon: Unable to attach the I2C client.\n");
++ goto eclient;
++ }
++
++ rc = dcon_hw_init(client, 1);
++ if (rc)
++ goto ei2c;
++
++ /* Add the DCON device */
++
++ dcon_device = platform_device_alloc("dcon", -1);
++
++ if (dcon_device == NULL) {
++ printk(KERN_ERR "dcon: Unable to create the DCON device\n");
++ rc = -ENOMEM;
++ goto eirq;
++ }
++
++ if ((rc = platform_device_add(dcon_device))) {
++ printk(KERN_ERR "dcon: Unable to add the DCON device\n");
++ goto edev;
++ }
++
++ for(i = 0; i < ARRAY_SIZE(dcon_device_files); i++)
++ device_create_file(&dcon_device->dev, &dcon_device_files[i]);
++
++ /* Add the backlight device for the DCON */
++
++ dcon_client = client;
++
++ dcon_bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev,
++ NULL, &dcon_bl_ops);
++
++ if (IS_ERR(dcon_bl_dev)) {
++ printk(KERN_INFO "Could not register the backlight device for the DCON (%ld)\n", PTR_ERR(dcon_bl_dev));
++ dcon_bl_dev = NULL;
++ }
++ else {
++ dcon_bl_dev->props.max_brightness = 15;
++ dcon_bl_dev->props.power = FB_BLANK_UNBLANK;
++ dcon_bl_dev->props.brightness = dcon_get_backlight();
++
++ backlight_update_status(dcon_bl_dev);
++ }
++
++ register_reboot_notifier(&dcon_nb);
++ console_event_register(&dcon_console_nb);
++ atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb);
++
++ return 0;
++
++ edev:
++ platform_device_unregister(dcon_device);
++ dcon_device = NULL;
++ eirq:
++ free_irq(DCON_IRQ, &dcon_driver);
++ ei2c:
++ i2c_detach_client(client);
++ eclient:
++ kfree(client);
++
++ return rc;
++}
++
++static int dcon_attach(struct i2c_adapter *adap)
++{
++ int ret;
++
++ ret = i2c_probe(adap, &addr_data, dcon_probe);
++
++ if (dcon_client == NULL)
++ printk(KERN_ERR "olpc-dcon: No DCON found on SMBus\n");
++
++ return ret;
++}
++
++static int dcon_detach(struct i2c_client *client)
++{
++ int rc;
++ dcon_client = NULL;
++
++ unregister_reboot_notifier(&dcon_nb);
++ console_event_unregister(&dcon_console_nb);
++ atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb);
++
++ free_irq(DCON_IRQ, &dcon_driver);
++
++ if ((rc = i2c_detach_client(client)) == 0)
++ kfree(i2c_get_clientdata(client));
++
++ if (dcon_bl_dev != NULL)
++ backlight_device_unregister(dcon_bl_dev);
++
++ if (dcon_device != NULL)
++ platform_device_unregister(dcon_device);
++ cancel_work_sync(&dcon_work);
++
++ return rc;
++}
++
++
++#ifdef CONFIG_PM
++static int dcon_suspend(struct i2c_client *client, pm_message_t state)
++{
++ if (dcon_sleep_val != DCON_ACTIVE)
++ return 0;
++
++ /* Set up the DCON to have the source */
++ return dcon_set_source_sync(DCON_SOURCE_DCON);
++}
++
++static int dcon_resume(struct i2c_client *client)
++{
++ if (dcon_sleep_val != DCON_ACTIVE)
++ return 0;
++
++ dcon_bus_stabilize(client, 0);
++
++ return dcon_set_source(DCON_SOURCE_CPU);
++}
++
++#endif
++
++static irqreturn_t dcon_interrupt(int irq, void *id)
++{
++ int status = inl(gpio_base + GPIOx_READ_BACK) >> 5;
++
++ /* Clear the negative edge status for GPIO7 */
++ outl(1 << 7, gpio_base + GPIOx_NEGEDGE_STS);
++
++ switch (status & 3) {
++ case 3:
++ printk(KERN_DEBUG "olpc-dcon: DCONLOAD_MISSED interrupt\n");
++ break;
++ case 2: /* switch to DCON mode */
++ case 1: /* switch to CPU mode */
++ dcon_switched = 1;
++ wake_up(&dcon_wait_queue);
++ break;
++ case 0:
++ printk(KERN_DEBUG "olpc-dcon: scanline interrupt w/CPU\n");
++ }
++
++ return IRQ_HANDLED;
++}
++
++static struct i2c_driver dcon_driver = {
++ .driver = {
++ .name = "OLPC-DCON",
++ },
++ .id = I2C_DRIVERID_DCON,
++ .attach_adapter = dcon_attach,
++ .detach_client = dcon_detach,
++#ifdef CONFIG_PM
++ .suspend = dcon_suspend,
++ .resume = dcon_resume,
++#endif
++};
++
++
++static int __init olpc_dcon_init(void)
++{
++ i2c_add_driver(&dcon_driver);
++ return 0;
++}
++
++static void __exit olpc_dcon_exit(void)
++{
++ i2c_del_driver(&dcon_driver);
++}
++
++module_init(olpc_dcon_init);
++module_exit(olpc_dcon_exit);
++
++MODULE_LICENSE("GPL");
+Binary files linux_2.6.24_org/drivers/video/.olpc_dcon.c.swp and linux_2.6.24_olpc/drivers/video/.olpc_dcon.c.swp differ
+diff -purN linux_2.6.24_org/drivers/video/olpc_dcon.h linux_2.6.24_olpc/drivers/video/olpc_dcon.h
+--- linux_2.6.24_org/drivers/video/olpc_dcon.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/drivers/video/olpc_dcon.h 2008-02-15 18:58:35.000000000 +0000
+@@ -0,0 +1,75 @@
++#ifndef OLPC_DCON_H_
++#define OLPC_DCON_H_
++
++/* DCON registers */
++
++#define DCON_REG_ID 0
++#define DCON_REG_MODE 1
++
++#define MODE_PASSTHRU (1<<0)
++#define MODE_SLEEP (1<<1)
++#define MODE_SLEEP_AUTO (1<<2)
++#define MODE_BL_ENABLE (1<<3)
++#define MODE_BLANK (1<<4)
++#define MODE_CSWIZZLE (1<<5)
++#define MODE_COL_AA (1<<6)
++#define MODE_MONO_LUMA (1<<7)
++#define MODE_SCAN_INT (1<<8)
++#define MODE_CLOCKDIV (1<<9)
++#define MODE_DEBUG (1<<14)
++#define MODE_SELFTEST (1<<15)
++
++#define DCON_REG_HRES 2
++#define DCON_REG_HTOTAL 3
++#define DCON_REG_HSYNC_WIDTH 4
++#define DCON_REG_VRES 5
++#define DCON_REG_VTOTAL 6
++#define DCON_REG_VSYNC_WIDTH 7
++#define DCON_REG_TIMEOUT 8
++#define DCON_REG_SCAN_INT 9
++#define DCON_REG_BRIGHT 10
++
++/* GPIO registers (CS5536) */
++
++#define MSR_LBAR_GPIO 0x5140000C
++
++#define GPIOx_OUT_VAL 0x00
++#define GPIOx_OUT_EN 0x04
++#define GPIOx_IN_EN 0x20
++#define GPIOx_INV_EN 0x24
++#define GPIOx_IN_FLTR_EN 0x28
++#define GPIOx_EVNTCNT_EN 0x2C
++#define GPIOx_READ_BACK 0x30
++#define GPIOx_EVNT_EN 0x38
++#define GPIOx_NEGEDGE_EN 0x44
++#define GPIOx_NEGEDGE_STS 0x4C
++#define GPIO_FLT7_AMNT 0xD8
++#define GPIO_MAP_X 0xE0
++#define GPIO_MAP_Y 0xE4
++#define GPIO_FE7_SEL 0xF7
++
++
++/* Status values */
++
++#define DCONSTAT_SCANINT 0
++#define DCONSTAT_SCANINT_DCON 1
++#define DCONSTAT_DISPLAYLOAD 2
++#define DCONSTAT_MISSED 3
++
++/* Source values */
++
++#define DCON_SOURCE_DCON 0
++#define DCON_SOURCE_CPU 1
++
++/* Output values */
++#define DCON_OUTPUT_COLOR 0
++#define DCON_OUTPUT_MONO 1
++
++/* Sleep values */
++#define DCON_ACTIVE 0
++#define DCON_SLEEP 1
++
++/* Interrupt */
++#define DCON_IRQ 6
++
++#endif
+diff -purN linux_2.6.24_org/fs/jffs2/nodelist.h linux_2.6.24_olpc/fs/jffs2/nodelist.h
+--- linux_2.6.24_org/fs/jffs2/nodelist.h 2008-02-15 20:10:35.000000000 +0000
++++ linux_2.6.24_olpc/fs/jffs2/nodelist.h 2008-02-15 18:57:39.000000000 +0000
+@@ -197,7 +197,7 @@ struct jffs2_inode_cache {
+ #define RAWNODE_CLASS_XATTR_DATUM 1
+ #define RAWNODE_CLASS_XATTR_REF 2
+
+-#define INOCACHE_HASHSIZE 128
++#define INOCACHE_HASHSIZE 1024
+
+ #define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
+
+diff -purN linux_2.6.24_org/fs/Kconfig linux_2.6.24_olpc/fs/Kconfig
+--- linux_2.6.24_org/fs/Kconfig 2008-02-15 20:10:31.000000000 +0000
++++ linux_2.6.24_olpc/fs/Kconfig 2008-02-15 18:57:33.000000000 +0000
+@@ -1031,6 +1031,37 @@ config HUGETLBFS
+ config HUGETLB_PAGE
+ def_bool HUGETLBFS
+
++config PROMFS_FS
++ tristate "PromFS IEEE 1275 file system support"
++ depends on SPARC || PPC || OLPC
++ help
++ PromFS is a file system interface to various IEEE-1275 compatible
++ firmwares. If you have such a firmware (Sparc64, PowerPC, and
++ some other architectures and embedded systems have such firmwares,
++ with names like "OpenBoot (tm)" and "OpenFirmware"), say Y here
++ to be able to access the firmware's device-tree from Linux.
++
++ The firmware device-tree is available as a virtual file system,
++ can be mounted under /prom with the command "mount -t promfs
++ none /prom".
++
++ To compile PromFS support as a module, choose M here; the module
++ will be called promfs. If unsure, choose M.
++
++config RAMFS
++ bool
++ default y
++ ---help---
++ Ramfs is a file system which keeps all files in RAM. It allows
++ read and write access.
++
++ It is more of an programming example than a useable file system. If
++ you need a file system which lives in RAM with limit checking use
++ tmpfs.
++
++ To compile this as a module, choose M here: the module will be called
++ ramfs.
++
+ config CONFIGFS_FS
+ tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
+ depends on SYSFS && EXPERIMENTAL
+diff -purN linux_2.6.24_org/fs/Makefile linux_2.6.24_olpc/fs/Makefile
+--- linux_2.6.24_org/fs/Makefile 2008-02-15 20:10:33.000000000 +0000
++++ linux_2.6.24_olpc/fs/Makefile 2008-02-15 18:57:34.000000000 +0000
+@@ -110,6 +110,7 @@ obj-$(CONFIG_ADFS_FS) += adfs/
+ obj-$(CONFIG_FUSE_FS) += fuse/
+ obj-$(CONFIG_UDF_FS) += udf/
+ obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
++obj-$(CONFIG_PROMFS_FS) += promfs/
+ obj-$(CONFIG_JFS_FS) += jfs/
+ obj-$(CONFIG_XFS_FS) += xfs/
+ obj-$(CONFIG_9P_FS) += 9p/
+diff -purN linux_2.6.24_org/fs/promfs/Makefile linux_2.6.24_olpc/fs/promfs/Makefile
+--- linux_2.6.24_org/fs/promfs/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/fs/promfs/Makefile 2008-02-15 18:57:33.000000000 +0000
+@@ -0,0 +1 @@
++obj-$(CONFIG_PROMFS_FS) += promfs.o
+diff -purN linux_2.6.24_org/fs/promfs/promfs.c linux_2.6.24_olpc/fs/promfs/promfs.c
+--- linux_2.6.24_org/fs/promfs/promfs.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/fs/promfs/promfs.c 2008-02-15 18:57:33.000000000 +0000
+@@ -0,0 +1,295 @@
++/*
++ * promfs.c - generic inode/dentry functions for IEEE 1275-based filesystems.
++ *
++ * This is based heavily upon prior ieee1275 and other virtual filesystems
++ * implementations; openpromfs, proc_devtree.c, oprofilefs, procfs, ...
++ *
++ * Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/pagemap.h>
++#include <linux/fs.h>
++//#include <linux/promfs.h>
++#include <asm/prom.h>
++
++#define PROMFS_MAGIC 0x1f2f3fff
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Andres Salomon");
++
++struct promfs_inode
++{
++ struct inode ino;
++ struct property *prop;
++};
++
++static inline struct promfs_inode *to_promfs_inode(struct inode *inode)
++{
++ return container_of(inode, struct promfs_inode, ino);
++}
++
++#if 0
++static DEFINE_SPINLOCK(promfs_lock);
++
++static struct of_node *of_tree = NULL;
++static DEFINE_RWLOCK(of_tree_lock);
++
++void __init of_build_tree(void)
++{
++
++
++}
++#endif
++
++static int promfs_open_file(struct inode *inode, struct file *file)
++{
++ struct promfs_inode *ino;
++
++ ino = to_promfs_inode(inode);
++ if (!ino->prop)
++ return -EIO;
++ file->private_data = ino->prop;
++
++ return 0;
++}
++
++static ssize_t promfs_read_file(struct file *file, char __user *data,
++ size_t len, loff_t *ppos)
++{
++ struct property *prop = (struct property *) file->private_data;
++ return simple_read_from_buffer(data, len, ppos, prop->value,
++ prop->length);
++}
++
++static ssize_t promfs_write_file(struct file *file, char const __user *buf,
++ size_t count, loff_t * offset)
++{
++ /* TODO.... 'cause, y'know, it would be nice. */
++ return -EIO;
++}
++
++static struct file_operations promfs_file_ops = {
++ .open = promfs_open_file,
++ .read = promfs_read_file,
++ .write = promfs_write_file,
++};
++
++static struct kmem_cache *promfs_inode_cachep;
++
++static struct inode *promfs_alloc_inode(struct super_block *sb)
++{
++ struct promfs_inode *pr_ino;
++
++ pr_ino = kmem_cache_alloc(promfs_inode_cachep, GFP_KERNEL);
++ if (!pr_ino)
++ return NULL;
++ pr_ino->prop = NULL;
++
++ return &pr_ino->ino;
++}
++
++static void promfs_destroy_inode(struct inode *inode)
++{
++ kmem_cache_free(promfs_inode_cachep, to_promfs_inode(inode));
++}
++
++static void promfs_read_inode(struct inode *inode)
++{
++ inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
++}
++
++static int promfs_remount(struct super_block *sb, int *flags, char *data)
++{
++ *flags |= MS_NOATIME;
++ return 0;
++}
++
++static struct super_operations promfs_s_ops = {
++ .alloc_inode = promfs_alloc_inode,
++ .destroy_inode = promfs_destroy_inode,
++ .read_inode = promfs_read_inode,
++ .statfs = simple_statfs,
++ .drop_inode = generic_delete_inode,
++ .remount_fs = promfs_remount,
++};
++
++static struct inode *promfs_get_inode(struct super_block *sb, int mode)
++{
++ struct inode *inode = new_inode(sb);
++
++ if (inode) {
++ inode->i_mode = mode;
++ inode->i_uid = 0;
++ inode->i_gid = 0;
++ inode->i_blocks = 0;
++ inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
++ }
++
++ return inode;
++}
++
++static int promfs_create_file(struct super_block *sb, struct dentry *root,
++ struct property *prop, const struct file_operations *fops)
++{
++ struct dentry *dentry;
++ struct inode *inode;
++ struct promfs_inode *ino;
++
++ dentry = d_alloc_name(root, prop->name);
++ if (!dentry)
++ goto err;
++
++ inode = promfs_get_inode(sb, S_IFREG | 0644);
++ if (!inode)
++ goto err_dput;
++ inode->i_fop = fops;
++ ino = to_promfs_inode(inode);
++ ino->prop = prop;
++ d_add(dentry, inode);
++
++ return 0;
++
++err_dput:
++ dput(dentry);
++err:
++ return -EFAULT;
++}
++
++struct dentry *promfs_create_dir(struct super_block *sb, struct dentry *root,
++ char const *name)
++{
++ struct dentry *dentry;
++ struct inode *inode;
++
++ dentry = d_alloc_name(root, name);
++ if (!dentry)
++ goto err;
++
++ inode = promfs_get_inode(sb, S_IFDIR | 0755);
++ if (!inode)
++ goto err_dput;
++ inode->i_op = &simple_dir_inode_operations;
++ inode->i_fop = &simple_dir_operations;
++ d_add(dentry, inode);
++ return dentry;
++
++err_dput:
++ dput(dentry);
++err:
++ return NULL;
++}
++
++void promfs_populate(struct super_block *sb, struct dentry *root,
++ struct device_node *node)
++{
++ struct dentry *dentry;
++ struct device_node *child;
++ struct property *prop;
++
++ if (!node)
++ return;
++
++ for (child = node->child; child; child = child->sibling) {
++ dentry = promfs_create_dir(sb, root, child->path_component_name);
++ promfs_populate(sb, dentry, child);
++ }
++ for (prop = node->properties; prop; prop = prop->next)
++ promfs_create_file(sb, root, prop, &promfs_file_ops);
++}
++
++static int promfs_fill_super(struct super_block *sb, void *data, int silent)
++{
++ struct inode *root_inode;
++ struct dentry *root_dentry;
++ struct promfs_inode *inode;
++
++ sb->s_blocksize = PAGE_CACHE_SIZE;
++ sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
++ sb->s_magic = PROMFS_MAGIC;
++ sb->s_op = &promfs_s_ops;
++ sb->s_time_gran = 1;
++ sb->s_flags |= MS_NOATIME;
++
++ root_inode = promfs_get_inode(sb, S_IFDIR | 0755);
++ if (!root_inode)
++ goto err;
++ root_inode->i_op = &simple_dir_inode_operations;
++ root_inode->i_fop = &simple_dir_operations;
++
++ inode = to_promfs_inode(root_inode);
++
++ root_dentry = d_alloc_root(root_inode);
++ if (!root_dentry)
++ goto err_iput;
++ sb->s_root = root_dentry;
++
++ promfs_populate(sb, root_dentry, of_find_node_by_path("/"));
++ return 0;
++
++err_iput:
++ iput(root_inode);
++err:
++ return -ENOMEM;
++}
++
++static int promfs_get_sb(struct file_system_type *fs_type, int flags,
++ const char *dev_name, void *data, struct vfsmount *mnt)
++{
++ return get_sb_single(fs_type, flags, data, promfs_fill_super, mnt);
++}
++
++static struct file_system_type promfs_fs_type = {
++ .owner = THIS_MODULE,
++ .name = "promfs",
++ .get_sb = promfs_get_sb,
++ .kill_sb = kill_litter_super,
++};
++
++static void init_once(void *i, struct kmem_cache *cachep, unsigned long fl)
++{
++ struct promfs_inode *inode = (struct promfs_inode *) i;
++ inode_init_once(&inode->ino);
++}
++
++static int __init init_promfs(void)
++{
++ int err;
++
++ prom_build_devicetree();
++ promfs_inode_cachep = kmem_cache_create("promfs_inode_cache",
++ sizeof(struct promfs_inode), 0,
++ SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD, init_once, NULL);
++ if (!promfs_inode_cachep)
++ return -ENOMEM;
++
++ err = register_filesystem(&promfs_fs_type);
++ if (err)
++ kmem_cache_destroy(promfs_inode_cachep);
++
++ return err;
++}
++
++static void __exit exit_promfs(void)
++{
++ unregister_filesystem(&promfs_fs_type);
++ kmem_cache_destroy(promfs_inode_cachep);
++}
++
++module_init(init_promfs);
++module_exit(exit_promfs);
+diff -purN linux_2.6.24_org/include/asm-x86/ofw.h linux_2.6.24_olpc/include/asm-x86/ofw.h
+--- linux_2.6.24_org/include/asm-x86/ofw.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/asm-x86/ofw.h 2008-02-15 18:57:59.000000000 +0000
+@@ -0,0 +1,16 @@
++/*
++ * Definitions for Open Firmware client interface on 32-bit system.
++ * OF Cell size is 4. Integer properties are encoded big endian,
++ * as with all OF implementations.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++#ifndef _OFW_H
++#define _OFW_H
++
++extern int ofw(char *, int, int, ...);
++
++#endif
+diff -purN linux_2.6.24_org/include/asm-x86/olpc.h linux_2.6.24_olpc/include/asm-x86/olpc.h
+--- linux_2.6.24_org/include/asm-x86/olpc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/asm-x86/olpc.h 2008-02-15 18:57:59.000000000 +0000
+@@ -0,0 +1,107 @@
++/* OLPC machine specific definitions */
++
++#ifndef ASM_OLPC_H_
++#define ASM_OLPC_H_
++
++#include <asm/geode.h>
++
++struct olpc_platform_t {
++ int flags;
++ u32 boardrev;
++ int ecver;
++};
++
++#define OLPC_F_PRESENT 0x01
++#define OLPC_F_DCON 0x02
++#define OLPC_F_VSA 0x04
++
++/*
++ * OLPC board IDs contain the major build number within the mask 0x0ff0,
++ * and the minor build number withing 0x000f. Pre-builds have a minor
++ * number less than 8, and normal builds start at 8. For example, 0x0B10
++ * is a PreB1, and 0x0C18 is a C1.
++ */
++
++static inline u32 olpc_board(u8 id)
++{
++ return (id << 4) | 0x8;
++}
++
++static inline u32 olpc_board_pre(u8 id)
++{
++ return id << 4;
++}
++
++#ifndef CONFIG_OLPC
++
++static inline int machine_is_olpc(void) { return 0; }
++static inline int olpc_has_dcon(void) { return 0; }
++static inline int olpc_has_vsa(void) { return 0; }
++
++#else
++
++extern struct olpc_platform_t olpc_platform_info;
++
++static inline int
++machine_is_olpc(void)
++{
++ return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
++}
++
++static inline int
++olpc_has_dcon(void)
++{
++ return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
++}
++
++static inline int
++olpc_has_vsa(void)
++{
++ return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
++}
++
++static inline int olpc_board_at_least(u32 rev)
++{
++ return olpc_platform_info.boardrev >= rev;
++}
++
++#endif
++
++/* EC functions */
++
++int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
++ unsigned char *outbuf, size_t outlen);
++
++void olpc_register_battery_callback(void (*f)(unsigned long));
++void olpc_deregister_battery_callback(void);
++
++/* EC commands and responses */
++
++/* SCI source values */
++
++#define EC_SCI_SRC_EMPTY 0x00
++#define EC_SCI_SRC_GAME 0x01
++#define EC_SCI_SRC_BATTERY 0x02
++#define EC_SCI_SRC_BATSOC 0x04
++#define EC_SCI_SRC_BATERR 0x08
++#define EC_SCI_SRC_EBOOK 0x10
++#define EC_SCI_SRC_WLAN 0x20
++#define EC_SCI_SRC_ACPWR 0x40
++#define EC_SCI_SRC_ALL 0x7F
++
++int olpc_ec_mask_set(u8 bits);
++int olpc_ec_mask_unset(u8 bits);
++
++/* GPIO assignments */
++
++#define OLPC_GPIO_MIC_AC (1 << 1)
++#define OLPC_GPIO_DCON_IRQ (1 << 7)
++#define OLPC_GPIO_THRM_ALRM (1 << 10)
++#define OLPC_GPIO_SMB_CLK (1 << 14)
++#define OLPC_GPIO_SMB_DATA (1 << 15)
++#define OLPC_GPIO_WORKAUX (1 << 24)
++#define OLPC_GPIO_LID (1 << 26)
++#define OLPC_GPIO_ECSCI (1 << 27)
++
++#endif
++
+diff -purN linux_2.6.24_org/include/asm-x86/prom.h linux_2.6.24_olpc/include/asm-x86/prom.h
+--- linux_2.6.24_org/include/asm-x86/prom.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/asm-x86/prom.h 2008-02-15 18:57:59.000000000 +0000
+@@ -0,0 +1,108 @@
++#ifndef _I386_PROM_H
++#define _I386_PROM_H
++#ifdef __KERNEL__
++
++
++/*
++ * Definitions for talking to the Open Firmware PROM on
++ * Power Macintosh computers.
++ *
++ * Copyright (C) 1996-2005 Paul Mackerras.
++ *
++ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
++ * Updates for SPARC64 by David S. Miller
++ * Updates for i386/OLPC by Andres Salomon
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/types.h>
++#include <linux/proc_fs.h>
++#include <asm/atomic.h>
++
++typedef u32 phandle;
++typedef u32 ihandle;
++
++struct property {
++ char *name;
++ int length;
++ void *value;
++ struct property *next;
++};
++
++struct device_node {
++ const char *name;
++ const char *type;
++ phandle node;
++// phandle linux_phandle;
++ char *path_component_name;
++ char *full_name;
++
++ struct property *properties;
++ struct property *deadprops; /* removed properties */
++ struct device_node *parent;
++ struct device_node *child;
++ struct device_node *sibling;
++ struct device_node *next; /* next device of same type */
++ struct device_node *allnext; /* next in list of all nodes */
++ struct proc_dir_entry *pde; /* this node's proc directory */
++ struct kref kref;
++ unsigned long _flags;
++ void *data;
++};
++
++/* flag descriptions */
++#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
++
++#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
++#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
++
++#define OF_BAD_ADDR ((u64)-1)
++
++static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
++{
++ dn->pde = de;
++}
++
++extern struct device_node *of_find_node_by_name(struct device_node *from,
++ const char *name);
++#define for_each_node_by_name(dn, name) \
++ for (dn = of_find_node_by_name(NULL, name); dn; \
++ dn = of_find_node_by_name(dn, name))
++extern struct device_node *of_find_node_by_type(struct device_node *from,
++ const char *type);
++#define for_each_node_by_type(dn, type) \
++ for (dn = of_find_node_by_type(NULL, type); dn; \
++ dn = of_find_node_by_type(dn, type))
++extern struct device_node *of_find_compatible_node(struct device_node *from,
++ const char *type, const char *compat);
++extern struct device_node *of_find_node_by_path(const char *path);
++extern struct device_node *of_find_node_by_phandle(phandle handle);
++extern struct device_node *of_get_parent(const struct device_node *node);
++extern struct device_node *of_get_next_child(const struct device_node *node,
++ struct device_node *prev);
++extern struct property *of_find_property(const struct device_node *np,
++ const char *name,
++ int *lenp);
++//extern struct device_node *of_node_get(struct device_node *node);
++//extern void of_node_put(struct device_node *node);
++extern int of_device_is_compatible(const struct device_node *device,
++ const char *);
++extern const void *of_get_property(const struct device_node *node,
++ const char *name,
++ int *lenp);
++#define get_property(node,name,lenp) of_get_property(node,name,lenp)
++extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
++extern int of_getintprop_default(struct device_node *np,
++ const char *name,
++ int def);
++extern int of_n_addr_cells(struct device_node *np);
++extern int of_n_size_cells(struct device_node *np);
++
++extern void prom_build_devicetree(void);
++
++#endif /* __KERNEL__ */
++#endif
+diff -purN linux_2.6.24_org/include/linux/battery.h linux_2.6.24_olpc/include/linux/battery.h
+--- linux_2.6.24_org/include/linux/battery.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/linux/battery.h 2008-02-15 18:58:06.000000000 +0000
+@@ -0,0 +1,101 @@
++/*
++ * Driver model for batteries
++ *
++ * © 2006 David Woodhouse <dwmw2@infradead.org>
++ *
++ * Based on LED Class support, by John Lenz and Richard Purdie:
++ *
++ * © 2005 John Lenz <lenz@cs.wisc.edu>
++ * © 2005-2006 Richard Purdie <rpurdie@openedhand.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#ifndef __LINUX_BATTERY_H__
++#define __LINUX_BATTERY_H__
++
++struct device;
++struct class_device;
++
++/*
++ * Battery Core
++ */
++#define PWRDEV_TYPE_BATTERY 0
++#define PWRDEV_TYPE_AC 1
++
++#define BAT_STAT_PRESENT (1<<0)
++#define BAT_STAT_LOW (1<<1)
++#define BAT_STAT_FULL (1<<2)
++#define BAT_STAT_CHARGING (1<<3)
++#define BAT_STAT_DISCHARGING (1<<4)
++#define BAT_STAT_OVERTEMP (1<<5)
++#define BAT_STAT_CRITICAL (1<<6)
++#define BAT_STAT_FIRE (1<<7)
++#define BAT_STAT_CHARGE_DONE (1<<8)
++
++/* Thou shalt not export any attributes in sysfs except these, and
++ with these units: */
++#define BAT_INFO_STATUS "status" /* Not free-form. Use
++ provided function */
++#define BAT_INFO_TEMP1 "temp1" /* °C/1000 */
++#define BAT_INFO_TEMP1_NAME "temp1_name" /* string */
++
++#define BAT_INFO_TEMP2 "temp2" /* °C/1000 */
++#define BAT_INFO_TEMP2_NAME "temp2_name" /* string */
++
++#define BAT_INFO_VOLTAGE "voltage" /* mV */
++#define BAT_INFO_VOLTAGE_DESIGN "voltage_design" /* mV */
++
++#define BAT_INFO_CURRENT "current" /* mA */
++#define BAT_INFO_CURRENT_NOW "current_now" /* mA */
++
++#define BAT_INFO_POWER "power" /* mW */
++#define BAT_INFO_POWER_NOW "power_now" /* mW */
++
++/* The following capacity/charge properties are represented in either
++ mA or mW. The CAP_UNITS property MUST be provided if any of these are. */
++#define BAT_INFO_RATE "rate" /* CAP_UNITS */
++#define BAT_INFO_CAP_LEFT "capacity_left" /* CAP_UNITS*h */
++#define BAT_INFO_CAP_DESIGN "capacity_design" /* CAP_UNITS*h */
++#define BAT_INFO_CAP_LAST_FULL "capacity_last_full" /* CAP_UNITS*h */
++#define BAT_INFO_CAP_LOW "capacity_low_thresh" /* CAP_UNITS*h */
++#define BAT_INFO_CAP_WARN "capacity_warn_thresh" /* CAP_UNITS*h */
++#define BAT_INFO_CAP_UNITS "capacity_units" /* string: must be
++ either mA or mW */
++
++#define BAT_INFO_CAP_PCT "capacity_percentage" /* integer */
++
++#define BAT_INFO_TIME_EMPTY "time_to_empty" /* seconds */
++#define BAT_INFO_TIME_EMPTY_NOW "time_to_empty_now" /* seconds */
++#define BAT_INFO_TIME_FULL "time_to_full" /* seconds */
++#define BAT_INFO_TIME_FULL_NOW "time_to_full_now" /* seconds */
++
++#define BAT_INFO_MANUFACTURER "manufacturer" /* string */
++#define BAT_INFO_TECHNOLOGY "technology" /* string */
++#define BAT_INFO_MODEL "model" /* string */
++#define BAT_INFO_SERIAL "serial" /* string */
++#define BAT_INFO_OEM_INFO "oem_info" /* string */
++
++#define BAT_INFO_CYCLE_COUNT "cycle_count" /* integer */
++#define BAT_INFO_DATE_MFR "date_manufactured" /* YYYY[-MM[-DD]] */
++#define BAT_INFO_DATE_FIRST_USE "date_first_use" /* YYYY[-MM[-DD]] */
++
++struct battery_dev {
++ int status_cap;
++ int id;
++ int type;
++ const char *name;
++
++ struct device *dev;
++};
++
++int battery_device_register(struct device *parent,
++ struct battery_dev *battery_cdev);
++void battery_device_unregister(struct battery_dev *battery_cdev);
++
++
++ssize_t battery_attribute_show_status(char *buf, unsigned long status);
++ssize_t battery_attribute_show_ac_status(char *buf, unsigned long status);
++#endif /* __LINUX_BATTERY_H__ */
+diff -purN linux_2.6.24_org/include/linux/fb.h linux_2.6.24_olpc/include/linux/fb.h
+--- linux_2.6.24_org/include/linux/fb.h 2008-02-15 20:10:55.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/fb.h 2008-02-15 18:58:01.000000000 +0000
+@@ -666,6 +666,12 @@ struct fb_ops {
+ /* restore saved state */
+ void (*fb_restore_state)(struct fb_info *info);
+
++ /* Shut down the graphics engine to save power */
++ int (*fb_powerdown)(struct fb_info *info);
++
++ /* Power it back up */
++ int (*fb_powerup)(struct fb_info *info);
++
+ /* get capability given var */
+ void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
+ struct fb_var_screeninfo *var);
+@@ -945,6 +951,9 @@ extern int fb_get_color_depth(struct fb_
+ extern int fb_get_options(char *name, char **option);
+ extern int fb_new_modelist(struct fb_info *info);
+
++extern int fb_powerdown(struct fb_info *info);
++extern int fb_powerup(struct fb_info *info);
++
+ extern struct fb_info *registered_fb[FB_MAX];
+ extern int num_registered_fb;
+ extern struct class *fb_class;
+diff -purN linux_2.6.24_org/include/linux/i2c-id.h linux_2.6.24_olpc/include/linux/i2c-id.h
+--- linux_2.6.24_org/include/linux/i2c-id.h 2008-02-15 20:10:52.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/i2c-id.h 2008-02-15 18:58:00.000000000 +0000
+@@ -125,6 +125,7 @@
+ #define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
+ #define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */
+ #define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */
++#define I2C_DRIVERID_DCON 95
+
+ #define I2C_DRIVERID_I2CDEV 900
+ #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
+diff -purN linux_2.6.24_org/include/linux/isl_38xx.h linux_2.6.24_olpc/include/linux/isl_38xx.h
+--- linux_2.6.24_org/include/linux/isl_38xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/include/linux/isl_38xx.h 2008-02-15 18:58:05.000000000 +0000
+@@ -0,0 +1,127 @@
++/*
++ * Copyright (C) 2002 Intersil Americas Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef _LINUX_ISL_38XX_H
++#define _LINUX_ISL_38XX_H
++
++#include <asm/io.h>
++
++#define ISL38XX_CB_RX_QSIZE 8
++#define ISL38XX_CB_TX_QSIZE 32
++
++/* ISL38XX Access Point Specific definitions */
++#define ISL38XX_MAX_WDS_LINKS 8
++
++/* ISL38xx Client Specific definitions */
++#define ISL38XX_PSM_ACTIVE_STATE 0
++#define ISL38XX_PSM_POWERSAVE_STATE 1
++
++/* ISL38XX Host Interface Definitions */
++#define ISL38XX_PCI_MEM_SIZE 0x02000
++#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
++#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
++#define ISL38XX_WRITEIO_DELAY 10 /* in us */
++#define ISL38XX_RESET_DELAY 50 /* in ms */
++#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
++#define ISL38XX_MAX_WAIT_CYCLES 10
++
++/* PCI Memory Area */
++#define ISL38XX_HARDWARE_REG 0x0000
++#define ISL38XX_CARDBUS_CIS 0x0800
++#define ISL38XX_DIRECT_MEM_WIN 0x1000
++
++/* Hardware registers */
++#define ISL38XX_DEV_INT_REG 0x0000
++#define ISL38XX_INT_IDENT_REG 0x0010
++#define ISL38XX_INT_ACK_REG 0x0014
++#define ISL38XX_INT_EN_REG 0x0018
++#define ISL38XX_GEN_PURP_COM_REG_1 0x0020
++#define ISL38XX_GEN_PURP_COM_REG_2 0x0024
++#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
++#define ISL38XX_DIR_MEM_BASE_REG 0x0030
++#define ISL38XX_CTRL_STAT_REG 0x0078
++
++/* High end mobos queue up pci writes, the following
++ * is used to "read" from after a write to force flush */
++#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
++
++/**
++ * isl38xx_w32_flush - PCI iomem write helper
++ * @base: (host) memory base address of the device
++ * @val: 32bit value (host order) to write
++ * @offset: byte offset into @base to write value to
++ *
++ * This helper takes care of writing a 32bit datum to the
++ * specified offset into the device's pci memory space, and making sure
++ * the pci memory buffers get flushed by performing one harmless read
++ * from the %ISL38XX_PCI_POSTING_FLUSH offset.
++ */
++static inline void
++isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
++{
++ writel(val, base + offset);
++ (void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
++}
++
++/* Device Interrupt register bits */
++#define ISL38XX_DEV_INT_RESET 0x0001
++#define ISL38XX_DEV_INT_UPDATE 0x0002
++#define ISL38XX_DEV_INT_WAKEUP 0x0008
++#define ISL38XX_DEV_INT_SLEEP 0x0010
++#define ISL38XX_DEV_INT_ABORT 0x0020
++/* thos two only used in USB */
++#define ISL38XX_DEV_INT_DATA 0x0040
++#define ISL38XX_DEV_INT_MGMT 0x0080
++
++#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000
++#define ISL38XX_DEV_INT_PCIUART_DR 0x8000
++
++/* Interrupt Identification/Acknowledge/Enable register bits */
++#define ISL38XX_INT_IDENT_UPDATE 0x0002
++#define ISL38XX_INT_IDENT_INIT 0x0004
++#define ISL38XX_INT_IDENT_WAKEUP 0x0008
++#define ISL38XX_INT_IDENT_SLEEP 0x0010
++#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000
++#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000
++
++#define ISL38XX_INT_SOURCES (ISL38XX_INT_IDENT_UPDATE | \
++ ISL38XX_INT_IDENT_INIT | \
++ ISL38XX_INT_IDENT_WAKEUP | \
++ ISL38XX_INT_IDENT_SLEEP | \
++ ISL38XX_INT_IDENT_PCIUART_CTS | \
++ ISL38XX_INT_IDENT_PCIUART_DR)
++
++/* Control/Status register bits */
++/* Looks like there are other meaningful bits
++ 0x20004400 seen in normal operation,
++ 0x200044db at 'timeout waiting for mgmt response'
++*/
++#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
++#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
++#define ISL38XX_CTRL_STAT_RESET 0x10000000
++#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
++#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
++#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
++
++/* Some flags for the isl hardware registers controlling DMA inside the
++ * chip */
++#define ISL38XX_DMA_STATUS_DONE 0x00000001
++#define ISL38XX_DMA_STATUS_READY 0x00000002
++#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000
++#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004
++
++#endif /* _LINUX_ISL_38XX_H */
+diff -purN linux_2.6.24_org/include/linux/pm.h linux_2.6.24_olpc/include/linux/pm.h
+--- linux_2.6.24_org/include/linux/pm.h 2008-02-15 20:11:06.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/pm.h 2008-02-15 18:58:06.000000000 +0000
+@@ -178,6 +178,9 @@ struct dev_pm_info {
+ unsigned can_wakeup:1;
+ #ifdef CONFIG_PM_SLEEP
+ unsigned should_wakeup:1;
++ pm_message_t prev_state;
++ void * saved_state;
++ struct device * pm_parent;
+ struct list_head entry;
+ #endif
+ };
+diff -purN linux_2.6.24_org/include/linux/power_supply.h linux_2.6.24_olpc/include/linux/power_supply.h
+--- linux_2.6.24_org/include/linux/power_supply.h 2008-02-15 20:10:55.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/power_supply.h 2008-02-15 18:58:01.000000000 +0000
+@@ -98,9 +98,11 @@ enum power_supply_property {
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
++ POWER_SUPPLY_PROP_ACCUM_CURRENT,
+ /* Properties of type `const char *' */
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
++ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ };
+
+ enum power_supply_type {
+@@ -169,9 +171,10 @@ struct power_supply_info {
+
+ extern void power_supply_changed(struct power_supply *psy);
+ extern int power_supply_am_i_supplied(struct power_supply *psy);
++extern void power_supply_status_changed(struct power_supply *psy);
+
+ extern int power_supply_register(struct device *parent,
+- struct power_supply *psy);
++ struct power_supply *psy);
+ extern void power_supply_unregister(struct power_supply *psy);
+
+ /* For APM emulation, think legacy userspace. */
+diff -purN linux_2.6.24_org/include/linux/vt_kern.h linux_2.6.24_olpc/include/linux/vt_kern.h
+--- linux_2.6.24_org/include/linux/vt_kern.h 2008-02-15 20:10:55.000000000 +0000
++++ linux_2.6.24_olpc/include/linux/vt_kern.h 2008-02-15 18:58:02.000000000 +0000
+@@ -96,4 +96,23 @@ struct vt_spawn_console {
+ };
+ extern struct vt_spawn_console vt_spawn_con;
+
++/* A notifier list for console events */
++extern struct raw_notifier_head console_notifier_list;
++
++/* Called when the FG console switches to KD_TEXT mode */
++#define CONSOLE_EVENT_SWITCH_TEXT 0x01
++
++/* Called when the FG console switches to KD_GRAPHICS mode */
++#define CONSOLE_EVENT_SWITCH_GRAPHICS 0x02
++
++static inline int console_event_register(struct notifier_block *n)
++{
++ return raw_notifier_chain_register(&console_notifier_list, n);
++}
++
++static inline int console_event_unregister(struct notifier_block *n)
++{
++ return raw_notifier_chain_unregister(&console_notifier_list, n);
++}
++
+ #endif /* _VT_KERN_H */
+diff -purN linux_2.6.24_org/include/sound/ac97_codec.h linux_2.6.24_olpc/include/sound/ac97_codec.h
+--- linux_2.6.24_org/include/sound/ac97_codec.h 2008-02-15 20:10:44.000000000 +0000
++++ linux_2.6.24_olpc/include/sound/ac97_codec.h 2008-02-15 18:57:45.000000000 +0000
+@@ -281,10 +281,12 @@
+ /* specific - Analog Devices */
+ #define AC97_AD_TEST 0x5a /* test register */
+ #define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
++#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */
+ #define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
+ #define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
+ #define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
+ #define AC97_AD_MISC 0x76 /* Misc Control Bits */
++#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */
+
+ /* specific - Cirrus Logic */
+ #define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
+diff -purN linux_2.6.24_org/kernel/power/console.c linux_2.6.24_olpc/kernel/power/console.c
+--- linux_2.6.24_org/kernel/power/console.c 2008-02-15 20:12:34.000000000 +0000
++++ linux_2.6.24_olpc/kernel/power/console.c 2008-02-15 19:00:00.000000000 +0000
+@@ -9,7 +9,7 @@
+ #include <linux/console.h>
+ #include "power.h"
+
+-#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE)
++#if defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) && !defined(CONFIG_DISABLE_SUSPEND_VT_SWITCH)
+ #define SUSPEND_CONSOLE (MAX_NR_CONSOLES-1)
+
+ static int orig_fgconsole, orig_kmsg;
+diff -purN linux_2.6.24_org/kernel/power/Kconfig linux_2.6.24_olpc/kernel/power/Kconfig
+--- linux_2.6.24_org/kernel/power/Kconfig 2008-02-15 20:12:34.000000000 +0000
++++ linux_2.6.24_olpc/kernel/power/Kconfig 2008-02-15 19:00:00.000000000 +0000
+@@ -37,9 +37,22 @@ config PM_DEBUG
+ code. This is helpful when debugging and reporting PM bugs, like
+ suspend support.
+
++config DISABLE_SUSPEND_VT_SWITCH
++ bool "Disable the console switch prior to suspend (DANGEROUS)"
++ depends on PM_DEBUG
++ default n
++ ---help---
++ This option disables the automatic switch to VT console that happens
++ prior to Linux going into a suspend/sleep. Your video card/framebuffer
++ must be able to properly restore the display (even if X is doing
++ something crazy!) in this scenario. This is useful for saving
++ precious milliseconds during suspend and resume.
++
++ If unsure, say N.
++
+ config PM_VERBOSE
+ bool "Verbose Power Management debugging"
+- depends on PM_DEBUG
++ depends on VT_CONSOLE && PM && EXPERIMENTAL
+ default n
+ ---help---
+ This option enables verbose messages from the Power Management code.
+diff -purN linux_2.6.24_org/kernel/power/main.c linux_2.6.24_olpc/kernel/power/main.c
+--- linux_2.6.24_org/kernel/power/main.c 2008-02-15 20:12:34.000000000 +0000
++++ linux_2.6.24_olpc/kernel/power/main.c 2008-02-15 19:00:00.000000000 +0000
+@@ -76,11 +76,13 @@ static int suspend_prepare(void)
+ if (!suspend_ops || !suspend_ops->enter)
+ return -EPERM;
+
++#ifndef CONFIG_OLPC_PM
+ error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
+ if (error)
+ goto Finish;
+
+ pm_prepare_console();
++#endif
+
+ if (freeze_processes()) {
+ error = -EAGAIN;
+diff -purN linux_2.6.24_org/scripts/kconfig/conf.c linux_2.6.24_olpc/scripts/kconfig/conf.c
+--- linux_2.6.24_org/scripts/kconfig/conf.c 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/conf.c 2008-02-15 18:57:09.000000000 +0000
+@@ -22,6 +22,7 @@ enum {
+ ask_new,
+ ask_silent,
+ set_default,
++ set_silentdefault,
+ set_yes,
+ set_mod,
+ set_no,
+@@ -64,10 +65,11 @@ static void strip(char *str)
+
+ static void check_stdin(void)
+ {
+- if (!valid_stdin && input_mode == ask_silent) {
++ if (!valid_stdin && (input_mode == ask_silent ||
++ input_mode == set_silentdefault)) {
+ printf(_("aborted!\n\n"));
+ printf(_("Console input/output is redirected. "));
+- printf(_("Run 'make oldconfig' to update configuration.\n\n"));
++ printf(_("Configuration file needs to be updated.\n\n"));
+ exit(1);
+ }
+ }
+@@ -102,6 +104,7 @@ static int conf_askvalue(struct symbol *
+ break;
+ case ask_new:
+ case ask_silent:
++ case set_silentdefault:
+ if (sym_has_value(sym)) {
+ printf("%s\n", def);
+ return 0;
+@@ -352,6 +355,7 @@ static int conf_choice(struct menu *menu
+ switch (input_mode) {
+ case ask_new:
+ case ask_silent:
++ case set_silentdefault:
+ if (!is_new) {
+ cnt = def;
+ printf("%d\n", cnt);
+@@ -424,7 +428,9 @@ static void conf(struct menu *menu)
+
+ switch (prop->type) {
+ case P_MENU:
+- if (input_mode == ask_silent && rootEntry != menu) {
++ if ((input_mode == ask_silent ||
++ input_mode == set_silentdefault) &&
++ rootEntry != menu) {
+ check_conf(menu);
+ return;
+ }
+@@ -508,6 +514,16 @@ int main(int ac, char **av)
+ input_mode = ask_silent;
+ valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ break;
++ case 'S':
++ input_mode = set_silentdefault;
++ valid_stdin = isatty(0) && isatty(1) && isatty(2);
++ defconfig_file = av[i++];
++ if (!defconfig_file) {
++ printf("%s: No default config file specified\n",
++ av[0]);
++ exit(1);
++ }
++ break;
+ case 'd':
+ input_mode = set_default;
+ break;
+@@ -557,6 +573,14 @@ int main(int ac, char **av)
+ exit(1);
+ }
+ break;
++ case set_silentdefault:
++ if (conf_read(defconfig_file)) {
++ printf("***\n"
++ "*** Can't find default configuration \"%s\"!\n"
++ "***\n", defconfig_file);
++ exit(1);
++ }
++ break;
+ case ask_silent:
+ if (stat(".config", &tmpstat)) {
+ printf(_("***\n"
+@@ -597,7 +621,7 @@ int main(int ac, char **av)
+ break;
+ }
+
+- if (input_mode != ask_silent) {
++ if (input_mode != ask_silent && input_mode != set_silentdefault) {
+ rootEntry = &rootmenu;
+ conf(&rootmenu);
+ if (input_mode == ask_all) {
+@@ -610,19 +634,21 @@ int main(int ac, char **av)
+ fprintf(stderr, _("\n*** Kernel configuration requires explicit update.\n\n"));
+ return 1;
+ }
+- } else
++ } else if (input_mode != set_silentdefault)
+ goto skip_check;
+
+ do {
+ conf_cnt = 0;
+ check_conf(&rootmenu);
+ } while (conf_cnt);
+- if (conf_write(NULL)) {
++ if (conf_write(NULL, input_mode == ask_silent ||
++ input_mode == set_silentdefault)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ return 1;
+ }
+ skip_check:
+- if (input_mode == ask_silent && conf_write_autoconf()) {
++ if ((input_mode == ask_silent || input_mode == set_silentdefault) &&
++ conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ return 1;
+ }
+diff -purN linux_2.6.24_org/scripts/kconfig/confdata.c linux_2.6.24_olpc/scripts/kconfig/confdata.c
+--- linux_2.6.24_org/scripts/kconfig/confdata.c 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/confdata.c 2008-02-15 18:57:09.000000000 +0000
+@@ -393,7 +393,7 @@ int conf_read(const char *name)
+ return 0;
+ }
+
+-int conf_write(const char *name)
++int conf_write(const char *name, int quiet)
+ {
+ FILE *out;
+ struct symbol *sym;
+@@ -548,9 +548,10 @@ int conf_write(const char *name)
+ return 1;
+ }
+
+- printf(_("#\n"
+- "# configuration written to %s\n"
+- "#\n"), newname);
++ if (!quiet)
++ printf("#\n"
++ "# configuration written to %s\n"
++ "#\n", newname);
+
+ sym_set_change_count(0);
+
+diff -purN linux_2.6.24_org/scripts/kconfig/gconf.c linux_2.6.24_olpc/scripts/kconfig/gconf.c
+--- linux_2.6.24_org/scripts/kconfig/gconf.c 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/gconf.c 2008-02-15 18:57:09.000000000 +0000
+@@ -621,7 +621,7 @@ void on_load1_activate(GtkMenuItem * men
+
+ void on_save_activate(GtkMenuItem * menuitem, gpointer user_data)
+ {
+- if (conf_write(NULL))
++ if (conf_write(NULL, 0))
+ text_insert_msg(_("Error"), _("Unable to save configuration !"));
+ }
+
+@@ -634,7 +634,7 @@ store_filename(GtkFileSelection * file_s
+ fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION
+ (user_data));
+
+- if (conf_write(fn))
++ if (conf_write(fn, 0))
+ text_insert_msg(_("Error"), _("Unable to save configuration !"));
+
+ gtk_widget_destroy(GTK_WIDGET(user_data));
+diff -purN linux_2.6.24_org/scripts/kconfig/lkc_proto.h linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h
+--- linux_2.6.24_org/scripts/kconfig/lkc_proto.h 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/lkc_proto.h 2008-02-15 18:57:09.000000000 +0000
+@@ -3,7 +3,7 @@
+ P(conf_parse,void,(const char *name));
+ P(conf_read,int,(const char *name));
+ P(conf_read_simple,int,(const char *name, int));
+-P(conf_write,int,(const char *name));
++P(conf_write,int,(const char *name, int));
+ P(conf_write_autoconf,int,(void));
+ P(conf_get_changed,bool,(void));
+ P(conf_set_changed_callback, void,(void (*fn)(void)));
+diff -purN linux_2.6.24_org/scripts/kconfig/Makefile linux_2.6.24_olpc/scripts/kconfig/Makefile
+--- linux_2.6.24_org/scripts/kconfig/Makefile 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/Makefile 2008-02-15 18:57:09.000000000 +0000
+@@ -69,6 +69,9 @@ endif
+ %_defconfig: $(obj)/conf
+ $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)
+
++%_silentdefconfig: $(obj)/conf
++ $(Q)$< -S arch/$(ARCH)/configs/$(subst _silentdefconfig,_defconfig,$@) arch/$(ARCH)/Kconfig
++
+ # Help text used by make help
+ help:
+ @echo ' config - Update current config utilising a line-oriented program'
+Binary files linux_2.6.24_org/scripts/kconfig/mconf and linux_2.6.24_olpc/scripts/kconfig/mconf differ
+diff -purN linux_2.6.24_org/scripts/kconfig/mconf.c linux_2.6.24_olpc/scripts/kconfig/mconf.c
+--- linux_2.6.24_org/scripts/kconfig/mconf.c 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/mconf.c 2008-02-15 18:57:09.000000000 +0000
+@@ -885,7 +885,7 @@ static void conf_save(void)
+ case 0:
+ if (!dialog_input_result[0])
+ return;
+- if (!conf_write(dialog_input_result)) {
++ if (!conf_write(dialog_input_result, 0)) {
+ set_config_filename(dialog_input_result);
+ return;
+ }
+@@ -945,7 +945,7 @@ int main(int ac, char **av)
+
+ switch (res) {
+ case 0:
+- if (conf_write(filename)) {
++ if (conf_write(filename, 0)) {
+ fprintf(stderr, _("\n\n"
+ "Error during writing of the kernel configuration.\n"
+ "Your kernel configuration changes were NOT saved."
+diff -purN linux_2.6.24_org/scripts/kconfig/qconf.cc linux_2.6.24_olpc/scripts/kconfig/qconf.cc
+--- linux_2.6.24_org/scripts/kconfig/qconf.cc 2008-02-15 20:10:15.000000000 +0000
++++ linux_2.6.24_olpc/scripts/kconfig/qconf.cc 2008-02-15 18:57:09.000000000 +0000
+@@ -1458,7 +1458,7 @@ void ConfigMainWindow::loadConfig(void)
+
+ void ConfigMainWindow::saveConfig(void)
+ {
+- if (conf_write(NULL))
++ if (conf_write(NULL, 0))
+ QMessageBox::information(this, "qconf", "Unable to save configuration!");
+ }
+
+@@ -1467,7 +1467,7 @@ void ConfigMainWindow::saveConfigAs(void
+ QString s = QFileDialog::getSaveFileName(".config", NULL, this);
+ if (s.isNull())
+ return;
+- if (conf_write(QFile::encodeName(s)))
++ if (conf_write(QFile::encodeName(s), 0))
+ QMessageBox::information(this, "qconf", "Unable to save configuration!");
+ }
+
+@@ -1619,7 +1619,7 @@ void ConfigMainWindow::closeEvent(QClose
+ mb.setButtonText(QMessageBox::Cancel, "Cancel Exit");
+ switch (mb.exec()) {
+ case QMessageBox::Yes:
+- conf_write(NULL);
++ conf_write(NULL, 0);
+ case QMessageBox::No:
+ e->accept();
+ break;
+diff -purN linux_2.6.24_org/sound/pci/ac97/ac97_patch.c linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c
+--- linux_2.6.24_org/sound/pci/ac97/ac97_patch.c 2008-02-15 20:10:24.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/ac97/ac97_patch.c 2008-02-15 18:57:24.000000000 +0000
+@@ -2029,8 +2029,9 @@ static const struct snd_kcontrol_new snd
+ .get = snd_ac97_ad1888_lohpsel_get,
+ .put = snd_ac97_ad1888_lohpsel_put
+ },
+- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
+- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
++ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
++ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
++ AC97_AD_HPFD_SHIFT, 1, 1),
+ AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.c 2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.c 2008-02-15 18:57:23.000000000 +0000
+@@ -145,7 +145,7 @@ static unsigned short snd_cs5535audio_ac
+ return snd_cs5535audio_codec_read(cs5535au, reg);
+ }
+
+-static int snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
++static int __devinit snd_cs5535audio_mixer(struct cs5535audio *cs5535au)
+ {
+ struct snd_card *card = cs5535au->card;
+ struct snd_ac97_bus *pbus;
+@@ -160,10 +160,14 @@ static int snd_cs5535audio_mixer(struct
+ return err;
+
+ memset(&ac97, 0, sizeof(ac97));
+- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
++ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
++ | AC97_SCAP_POWER_SAVE;
+ ac97.private_data = cs5535au;
+ ac97.pci = cs5535au->pci;
+
++ /* olpc_prequirks is dummied out if not olpc */
++ olpc_prequirks(card, &ac97);
++
+ if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
+ snd_printk(KERN_ERR "mixer failed\n");
+ return err;
+@@ -171,6 +175,12 @@ static int snd_cs5535audio_mixer(struct
+
+ snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
+
++ /* olpc_quirks is dummied out if not olpc */
++ if (( err = olpc_quirks(card, cs5535au->ac97)) < 0) {
++ snd_printk(KERN_ERR "olpc quirks failed\n");
++ return err;
++ }
++
+ return 0;
+ }
+
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio.h 2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio.h 2008-02-15 18:57:23.000000000 +0000
+@@ -78,6 +78,7 @@ struct cs5535audio_dma {
+ unsigned int buf_addr, buf_bytes;
+ unsigned int period_bytes, periods;
+ u32 saved_prd;
++ int pcm_open_flag;
+ };
+
+ struct cs5535audio {
+@@ -93,8 +94,21 @@ struct cs5535audio {
+ struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
+ };
+
++#ifdef CONFIG_PM
+ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
+ int snd_cs5535audio_resume(struct pci_dev *pci);
++#endif
++
++#ifdef CONFIG_OLPC
++void olpc_prequirks(struct snd_card *card, struct snd_ac97_template *ac97) __devinit;
++int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) __devinit;
++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val);
++#else
++#define olpc_prequirks(arg,arg2) do {} while (0)
++#define olpc_quirks(arg,arg2) (0)
++#define olpc_ai_enable(a, v) (0)
++#endif
++
+ int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
+
+ #endif /* __SOUND_CS5535AUDIO_H */
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_olpc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_olpc.c 2008-02-15 18:57:23.000000000 +0000
+@@ -0,0 +1,110 @@
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/info.h>
++#include <sound/control.h>
++#include <sound/ac97_codec.h>
++
++#include <asm/olpc.h>
++#include "cs5535audio.h"
++
++/*
++ * OLPC has an additional feature on top of the regular AD1888 codec features.
++ * It has an Analog Input mode that is switched into (after disabling the
++ * High Pass Filter) via GPIO. It is only supported on B2 and later models.
++ */
++
++int olpc_ai_enable(struct snd_ac97 *ac97, u8 val)
++{
++ int err;
++
++ /*
++ * update the High Pass Filter (via AC97_AD_TEST2), and then set
++ * Analog Input mode through a GPIO.
++ */
++
++ if (val) {
++ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
++ 1<<AC97_AD_HPFD_SHIFT, 1<<AC97_AD_HPFD_SHIFT);
++ geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
++ }
++ else {
++ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
++ 1<<AC97_AD_HPFD_SHIFT, 0);
++ geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
++ }
++ if (err < 0)
++ snd_printk(KERN_ERR "Error updating AD_TEST2: %d\n", err);
++
++ return err;
++}
++EXPORT_SYMBOL_GPL(olpc_ai_enable);
++
++static int snd_cs5535audio_ai_info(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_info *uinfo)
++{
++ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
++ uinfo->count = 1;
++ uinfo->value.integer.min = 0;
++ uinfo->value.integer.max = 1;
++ return 0;
++}
++
++static int snd_cs5535audio_ai_get(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ ucontrol->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
++ GPIO_OUTPUT_VAL);
++ return 0;
++}
++
++static int snd_cs5535audio_ai_put(struct snd_kcontrol *kcontrol,
++ struct snd_ctl_elem_value *ucontrol)
++{
++ struct cs5535audio *cs5535au = snd_kcontrol_chip(kcontrol);
++ struct snd_ac97 *ac97 = cs5535au->ac97;
++
++ olpc_ai_enable(ac97, ucontrol->value.integer.value[0]);
++
++ return 1;
++}
++
++static struct snd_kcontrol_new snd_cs5535audio_controls __devinitdata =
++{
++ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
++ .name = "DC Mode Enable",
++ .info = snd_cs5535audio_ai_info,
++ .get = snd_cs5535audio_ai_get,
++ .put = snd_cs5535audio_ai_put,
++ .private_value = 0
++};
++
++void __devinit olpc_prequirks(struct snd_card *card,
++ struct snd_ac97_template *ac97)
++{
++ /* Bail if this isn't an OLPC platform */
++ if (!machine_is_olpc())
++ return;
++
++ /* If on an OLPC B3 or higher, invert EAPD. */
++ if (olpc_board_at_least(olpc_board_pre(0xb3)))
++ ac97->scaps |= AC97_SCAP_INV_EAPD;
++}
++
++int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
++{
++ struct snd_ctl_elem_id elem;
++
++ /* Bail if this isn't an OLPC platform */
++ if (!machine_is_olpc())
++ return 0;
++
++ /* drop the original ad1888 HPF control */
++ memset(&elem, 0, sizeof(elem));
++ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
++ strcpy(elem.name, "High Pass Filter Enable");
++ snd_ctl_remove_id(card, &elem);
++
++ /* add the override for OLPC's HPF */
++ return snd_ctl_add(card, snd_ctl_new1(&snd_cs5535audio_controls,
++ ac97->private_data));
++}
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c
+--- linux_2.6.24_org/sound/pci/cs5535audio/cs5535audio_pcm.c 2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/cs5535audio_pcm.c 2008-02-15 18:57:23.000000000 +0000
+@@ -259,6 +259,9 @@ static int snd_cs5535audio_hw_params(str
+ err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
+ params_periods(hw_params),
+ params_period_bytes(hw_params));
++ if (!err)
++ dma->pcm_open_flag = 1;
++
+ return err;
+ }
+
+@@ -267,6 +270,15 @@ static int snd_cs5535audio_hw_free(struc
+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ struct cs5535audio_dma *dma = substream->runtime->private_data;
+
++ if (dma->pcm_open_flag) {
++ if (substream == cs5535au->playback_substream)
++ snd_ac97_update_power(cs5535au->ac97,
++ AC97_PCM_FRONT_DAC_RATE, 0);
++ else
++ snd_ac97_update_power(cs5535au->ac97,
++ AC97_PCM_LR_ADC_RATE, 0);
++ dma->pcm_open_flag = 0;
++ }
+ cs5535audio_clear_dma_packets(cs5535au, dma, substream);
+ return snd_pcm_lib_free_pages(substream);
+ }
+@@ -341,6 +353,7 @@ static int snd_cs5535audio_capture_open(
+ int err;
+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
++ struct snd_ac97 *ac97 = cs5535au->ac97;
+
+ runtime->hw = snd_cs5535audio_capture;
+ cs5535au->capture_substream = substream;
+@@ -348,11 +361,29 @@ static int snd_cs5535audio_capture_open(
+ if ((err = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
+ return err;
+- return 0;
++
++#ifdef CONFIG_OLPC
++ /* Disable Analog Input */
++ olpc_ai_enable(ac97, 0);
++ /* Enable V_ref bias while recording. */
++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT, 0);
++#endif
++ return err;
+ }
+
+ static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
+ {
++#ifdef CONFIG_OLPC
++ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
++ struct snd_ac97 *ac97 = cs5535au->ac97;
++
++ /* Disable Analog Input */
++ olpc_ai_enable(ac97, 0);
++ /* Disable V_ref bias. */
++ snd_ac97_update_bits(ac97, AC97_AD_MISC, 1<<AC97_AD_VREFD_SHIFT,
++ 1<<AC97_AD_VREFD_SHIFT);
++#endif
++
+ return 0;
+ }
+
+diff -purN linux_2.6.24_org/sound/pci/cs5535audio/Makefile linux_2.6.24_olpc/sound/pci/cs5535audio/Makefile
+--- linux_2.6.24_org/sound/pci/cs5535audio/Makefile 2008-02-15 20:10:23.000000000 +0000
++++ linux_2.6.24_olpc/sound/pci/cs5535audio/Makefile 2008-02-15 18:57:23.000000000 +0000
+@@ -5,5 +5,9 @@
+ snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
+ snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o
+
++ifdef CONFIG_OLPC
++snd-cs5535audio-objs += cs5535audio_olpc.o
++endif
++
+ # Toplevel Module Dependency
+ obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
projects / openwrt / staging / kaloz.git / commitdiff