+++ /dev/null
-This fixes tx status processing for drivers that do not support mrr.
-If the retry count is bigger than the maximum retry count configured in
-the hardware, do not count the rate attempt as successful, the hardware
-has probably switched to a lower rate.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/net/mac80211/rc80211_minstrel.c
-+++ b/net/mac80211/rc80211_minstrel.c
-@@ -171,6 +171,7 @@ minstrel_tx_status(void *priv, struct ie
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_tx_altrate *ar = info->status.retries;
- struct minstrel_priv *mp = priv;
-+ struct ieee80211_local *local = hw_to_local(mp->hw);
- int i, ndx, tries;
- int success = 0;
-
-@@ -180,6 +181,13 @@ minstrel_tx_status(void *priv, struct ie
- if (!mp->has_mrr || (ar[0].rate_idx < 0)) {
- ndx = rix_to_ndx(mi, info->tx_rate_idx);
- tries = info->status.retry_count + 1;
-+
-+ /* If the driver does not support the MRR API, but uses
-+ * a fallback rate, use the long retry limit as indication
-+ * that a rate switch has happened */
-+ if (!mp->has_mrr && (tries >= local->long_retry_limit))
-+ success = 0;
-+
- mi->r[ndx].success += success;
- mi->r[ndx].attempts += tries;
- return;
+++ /dev/null
-Fix the b43 tx status reporting.
-
-If the hardware uses RTS/CTS reporting and the actual RTS/CTS
-handshake failed, it will switch to the fallback rate, even
-though the main rate was never actually attempted.
-Make sure that this does not screw up rate control statistics.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/drivers/net/wireless/b43/b43.h
-+++ b/drivers/net/wireless/b43/b43.h
-@@ -778,6 +778,9 @@ struct b43_wldev {
- #ifdef CONFIG_B43_DEBUG
- struct b43_dfsentry *dfsentry;
- #endif
-+
-+ /* necessary for figuring out the correct tx status */
-+ int short_retry;
- };
-
- static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
---- a/drivers/net/wireless/b43/dma.c
-+++ b/drivers/net/wireless/b43/dma.c
-@@ -1393,7 +1393,7 @@ void b43_dma_handle_txstatus(struct b43_
- * Call back to inform the ieee80211 subsystem about
- * the status of the transmission.
- */
-- frame_succeed = b43_fill_txstatus_report(info, status);
-+ frame_succeed = b43_fill_txstatus_report(dev, info, status);
- #ifdef CONFIG_B43_DEBUG
- if (frame_succeed)
- ring->nr_succeed_tx_packets++;
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -3892,6 +3892,7 @@ static void b43_set_retry_limits(struct
- short_retry);
- b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
- long_retry);
-+ dev->short_retry = short_retry;
- }
-
- static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
---- a/drivers/net/wireless/b43/pio.c
-+++ b/drivers/net/wireless/b43/pio.c
-@@ -589,7 +589,7 @@ void b43_pio_handle_txstatus(struct b43_
- info = IEEE80211_SKB_CB(pack->skb);
- memset(&info->status, 0, sizeof(info->status));
-
-- b43_fill_txstatus_report(info, status);
-+ b43_fill_txstatus_report(dev, info, status);
-
- total_len = pack->skb->len + b43_txhdr_size(dev);
- total_len = roundup(total_len, 4);
---- a/drivers/net/wireless/b43/xmit.c
-+++ b/drivers/net/wireless/b43/xmit.c
-@@ -687,7 +687,8 @@ void b43_handle_txstatus(struct b43_wlde
- /* Fill out the mac80211 TXstatus report based on the b43-specific
- * txstatus report data. This returns a boolean whether the frame was
- * successfully transmitted. */
--bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
-+bool b43_fill_txstatus_report(struct b43_wldev *dev,
-+ struct ieee80211_tx_info *report,
- const struct b43_txstatus *status)
- {
- bool frame_success = 1;
-@@ -706,8 +707,19 @@ bool b43_fill_txstatus_report(struct iee
- if (status->frame_count == 0) {
- /* The frame was not transmitted at all. */
- report->status.retry_count = 0;
-- } else
-+ } else if (status->rts_count > dev->short_retry) {
-+ /*
-+ * If the short retries (RTS, not data frame) have exceeded
-+ * the limit, the hw will not have tried the selected rate,
-+ * but will have used the fallback rate instead.
-+ * Don't let the rate control count attempts for the selected
-+ * rate in this case, otherwise the statistics will be off.
-+ */
-+ report->tx_rate_idx = 0;
-+ report->status.retry_count = 0;
-+ } else {
- report->status.retry_count = status->frame_count - 1;
-+ }
-
- return frame_success;
- }
---- a/drivers/net/wireless/b43/xmit.h
-+++ b/drivers/net/wireless/b43/xmit.h
-@@ -294,7 +294,8 @@ void b43_rx(struct b43_wldev *dev, struc
-
- void b43_handle_txstatus(struct b43_wldev *dev,
- const struct b43_txstatus *status);
--bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
-+bool b43_fill_txstatus_report(struct b43_wldev *dev,
-+ struct ieee80211_tx_info *report,
- const struct b43_txstatus *status);
-
- void b43_tx_suspend(struct b43_wldev *dev);
--- /dev/null
+Subject: mac80211: fix debugfs lockup
+
+When debugfs_create_dir fails, sta_info_debugfs_add_work will not
+terminate because it will find the same station again and again.
+This is possible whenever debugfs fails for whatever reason; one
+reason is a race condition in mac80211, unfortunately we cannot
+do much about it, so just document it, it just means some station
+may be missing from debugfs.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+Cc: Robin Holt <holt@sgi.com>
+---
+ net/mac80211/debugfs_sta.c | 11 +++++++++++
+ net/mac80211/sta_info.c | 7 ++++++-
+ net/mac80211/sta_info.h | 1 +
+ 3 files changed, 18 insertions(+), 1 deletion(-)
+
+--- everything.orig/net/mac80211/debugfs_sta.c 2008-10-07 20:05:29.000000000 +0200
++++ everything/net/mac80211/debugfs_sta.c 2008-10-07 20:06:39.000000000 +0200
+@@ -249,11 +249,22 @@ void ieee80211_sta_debugfs_add(struct st
+ DECLARE_MAC_BUF(mbuf);
+ u8 *mac;
+
++ sta->debugfs.add_has_run = true;
++
+ if (!stations_dir)
+ return;
+
+ mac = print_mac(mbuf, sta->sta.addr);
+
++ /*
++ * This might fail due to a race condition:
++ * When mac80211 unlinks a station, the debugfs entries
++ * remain, but it is already possible to link a new
++ * station with the same address which triggers adding
++ * it to debugfs; therefore, if the old station isn't
++ * destroyed quickly enough the old station's debugfs
++ * dir might still be around.
++ */
+ sta->debugfs.dir = debugfs_create_dir(mac, stations_dir);
+ if (!sta->debugfs.dir)
+ return;
+--- everything.orig/net/mac80211/sta_info.c 2008-10-07 20:05:29.000000000 +0200
++++ everything/net/mac80211/sta_info.c 2008-10-07 20:06:39.000000000 +0200
+@@ -635,7 +635,12 @@ static void sta_info_debugfs_add_work(st
+
+ spin_lock_irqsave(&local->sta_lock, flags);
+ list_for_each_entry(tmp, &local->sta_list, list) {
+- if (!tmp->debugfs.dir) {
++ /*
++ * debugfs.add_has_run will be set by
++ * ieee80211_sta_debugfs_add regardless
++ * of what else it does.
++ */
++ if (!tmp->debugfs.add_has_run) {
+ sta = tmp;
+ __sta_info_pin(sta);
+ break;
+--- everything.orig/net/mac80211/sta_info.h 2008-10-07 20:05:29.000000000 +0200
++++ everything/net/mac80211/sta_info.h 2008-10-07 20:06:39.000000000 +0200
+@@ -300,6 +300,7 @@ struct sta_info {
+ struct dentry *inactive_ms;
+ struct dentry *last_seq_ctrl;
+ struct dentry *agg_status;
++ bool add_has_run;
+ } debugfs;
+ #endif
+
--- /dev/null
+Subject: mac80211: remove aggregation status write support from debugfs
+
+This code uses static variables and thus cannot be kept.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ net/mac80211/debugfs_sta.c | 73 ---------------------------------------------
+ 1 file changed, 1 insertion(+), 72 deletions(-)
+
+--- everything.orig/net/mac80211/debugfs_sta.c 2008-10-07 20:06:39.000000000 +0200
++++ everything/net/mac80211/debugfs_sta.c 2008-10-07 20:06:40.000000000 +0200
+@@ -39,13 +39,6 @@ static const struct file_operations sta_
+ .open = mac80211_open_file_generic, \
+ }
+
+-#define STA_OPS_WR(name) \
+-static const struct file_operations sta_ ##name## _ops = { \
+- .read = sta_##name##_read, \
+- .write = sta_##name##_write, \
+- .open = mac80211_open_file_generic, \
+-}
+-
+ #define STA_FILE(name, field, format) \
+ STA_READ_##format(name, field) \
+ STA_OPS(name)
+@@ -168,71 +161,7 @@ static ssize_t sta_agg_status_read(struc
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+ }
+-
+-static ssize_t sta_agg_status_write(struct file *file,
+- const char __user *user_buf, size_t count, loff_t *ppos)
+-{
+- struct sta_info *sta = file->private_data;
+- struct ieee80211_local *local = sta->sdata->local;
+- struct ieee80211_hw *hw = &local->hw;
+- u8 *da = sta->sta.addr;
+- static int tid_static_tx[16] = {0, 0, 0, 0, 0, 0, 0, 0,
+- 0, 0, 0, 0, 0, 0, 0, 0};
+- static int tid_static_rx[16] = {1, 1, 1, 1, 1, 1, 1, 1,
+- 1, 1, 1, 1, 1, 1, 1, 1};
+- char *endp;
+- char buf[32];
+- int buf_size, rs;
+- unsigned int tid_num;
+- char state[4];
+-
+- memset(buf, 0x00, sizeof(buf));
+- buf_size = min(count, (sizeof(buf)-1));
+- if (copy_from_user(buf, user_buf, buf_size))
+- return -EFAULT;
+-
+- tid_num = simple_strtoul(buf, &endp, 0);
+- if (endp == buf)
+- return -EINVAL;
+-
+- if ((tid_num >= 100) && (tid_num <= 115)) {
+- /* toggle Rx aggregation command */
+- tid_num = tid_num - 100;
+- if (tid_static_rx[tid_num] == 1) {
+- strcpy(state, "off ");
+- ieee80211_sta_stop_rx_ba_session(sta->sdata, da, tid_num, 0,
+- WLAN_REASON_QSTA_REQUIRE_SETUP);
+- sta->ampdu_mlme.tid_state_rx[tid_num] |=
+- HT_AGG_STATE_DEBUGFS_CTL;
+- tid_static_rx[tid_num] = 0;
+- } else {
+- strcpy(state, "on ");
+- sta->ampdu_mlme.tid_state_rx[tid_num] &=
+- ~HT_AGG_STATE_DEBUGFS_CTL;
+- tid_static_rx[tid_num] = 1;
+- }
+- printk(KERN_DEBUG "debugfs - try switching tid %u %s\n",
+- tid_num, state);
+- } else if ((tid_num >= 0) && (tid_num <= 15)) {
+- /* toggle Tx aggregation command */
+- if (tid_static_tx[tid_num] == 0) {
+- strcpy(state, "on ");
+- rs = ieee80211_start_tx_ba_session(hw, da, tid_num);
+- if (rs == 0)
+- tid_static_tx[tid_num] = 1;
+- } else {
+- strcpy(state, "off");
+- rs = ieee80211_stop_tx_ba_session(hw, da, tid_num, 1);
+- if (rs == 0)
+- tid_static_tx[tid_num] = 0;
+- }
+- printk(KERN_DEBUG "debugfs - switching tid %u %s, return=%d\n",
+- tid_num, state, rs);
+- }
+-
+- return count;
+-}
+-STA_OPS_WR(agg_status);
++STA_OPS(agg_status);
+
+ #define DEBUGFS_ADD(name) \
+ sta->debugfs.name = debugfs_create_file(#name, 0400, \
--- /dev/null
+Subject: mac80211: remove writable debugs mesh parameters
+
+These parameters shouldn't be configurable via debugfs, if they
+need to be configurable nl80211 support has to be added, if not
+then they don't need to be writable here either.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+Cc: Javier Cardona <javier@cozybit.com>
+Cc: Luis Carlos Cobo <luisca@cozybit.com>
+---
+ net/mac80211/debugfs_netdev.c | 112 +++++++++---------------------------------
+ 1 file changed, 24 insertions(+), 88 deletions(-)
+
+--- everything.orig/net/mac80211/debugfs_netdev.c 2008-10-07 20:05:28.000000000 +0200
++++ everything/net/mac80211/debugfs_netdev.c 2008-10-07 20:06:40.000000000 +0200
+@@ -41,29 +41,6 @@ static ssize_t ieee80211_if_read(
+ return ret;
+ }
+
+-#ifdef CONFIG_MAC80211_MESH
+-static ssize_t ieee80211_if_write(
+- struct ieee80211_sub_if_data *sdata,
+- char const __user *userbuf,
+- size_t count, loff_t *ppos,
+- int (*format)(struct ieee80211_sub_if_data *, char *))
+-{
+- char buf[10];
+- int buf_size;
+-
+- memset(buf, 0x00, sizeof(buf));
+- buf_size = min(count, (sizeof(buf)-1));
+- if (copy_from_user(buf, userbuf, buf_size))
+- return count;
+- read_lock(&dev_base_lock);
+- if (sdata->dev->reg_state == NETREG_REGISTERED)
+- (*format)(sdata, buf);
+- read_unlock(&dev_base_lock);
+-
+- return count;
+-}
+-#endif
+-
+ #define IEEE80211_IF_FMT(name, field, format_string) \
+ static ssize_t ieee80211_if_fmt_##name( \
+ const struct ieee80211_sub_if_data *sdata, char *buf, \
+@@ -71,19 +48,6 @@ static ssize_t ieee80211_if_fmt_##name(
+ { \
+ return scnprintf(buf, buflen, format_string, sdata->field); \
+ }
+-#define IEEE80211_IF_WFMT(name, field, type) \
+-static int ieee80211_if_wfmt_##name( \
+- struct ieee80211_sub_if_data *sdata, char *buf) \
+-{ \
+- unsigned long tmp; \
+- char *endp; \
+- \
+- tmp = simple_strtoul(buf, &endp, 0); \
+- if ((endp == buf) || ((type)tmp != tmp)) \
+- return -EINVAL; \
+- sdata->field = tmp; \
+- return 0; \
+-}
+ #define IEEE80211_IF_FMT_DEC(name, field) \
+ IEEE80211_IF_FMT(name, field, "%d\n")
+ #define IEEE80211_IF_FMT_HEX(name, field) \
+@@ -126,34 +90,6 @@ static const struct file_operations name
+ IEEE80211_IF_FMT_##format(name, field) \
+ __IEEE80211_IF_FILE(name)
+
+-#define __IEEE80211_IF_WFILE(name) \
+-static ssize_t ieee80211_if_read_##name(struct file *file, \
+- char __user *userbuf, \
+- size_t count, loff_t *ppos) \
+-{ \
+- return ieee80211_if_read(file->private_data, \
+- userbuf, count, ppos, \
+- ieee80211_if_fmt_##name); \
+-} \
+-static ssize_t ieee80211_if_write_##name(struct file *file, \
+- const char __user *userbuf, \
+- size_t count, loff_t *ppos) \
+-{ \
+- return ieee80211_if_write(file->private_data, \
+- userbuf, count, ppos, \
+- ieee80211_if_wfmt_##name); \
+-} \
+-static const struct file_operations name##_ops = { \
+- .read = ieee80211_if_read_##name, \
+- .write = ieee80211_if_write_##name, \
+- .open = mac80211_open_file_generic, \
+-}
+-
+-#define IEEE80211_IF_WFILE(name, field, format, type) \
+- IEEE80211_IF_FMT_##format(name, field) \
+- IEEE80211_IF_WFMT(name, field, type) \
+- __IEEE80211_IF_WFILE(name)
+-
+ /* common attributes */
+ IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
+ IEEE80211_IF_FILE(force_unicast_rateidx, force_unicast_rateidx, DEC);
+@@ -212,30 +148,30 @@ IEEE80211_IF_FILE(dropped_frames_no_rout
+ IEEE80211_IF_FILE(estab_plinks, u.mesh.mshstats.estab_plinks, ATOMIC);
+
+ /* Mesh parameters */
+-IEEE80211_IF_WFILE(dot11MeshMaxRetries,
+- u.mesh.mshcfg.dot11MeshMaxRetries, DEC, u8);
+-IEEE80211_IF_WFILE(dot11MeshRetryTimeout,
+- u.mesh.mshcfg.dot11MeshRetryTimeout, DEC, u16);
+-IEEE80211_IF_WFILE(dot11MeshConfirmTimeout,
+- u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC, u16);
+-IEEE80211_IF_WFILE(dot11MeshHoldingTimeout,
+- u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC, u16);
+-IEEE80211_IF_WFILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC, u8);
+-IEEE80211_IF_WFILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC, u8);
+-IEEE80211_IF_WFILE(dot11MeshMaxPeerLinks,
+- u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC, u16);
+-IEEE80211_IF_WFILE(dot11MeshHWMPactivePathTimeout,
+- u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC, u32);
+-IEEE80211_IF_WFILE(dot11MeshHWMPpreqMinInterval,
+- u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC, u16);
+-IEEE80211_IF_WFILE(dot11MeshHWMPnetDiameterTraversalTime,
+- u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC, u16);
+-IEEE80211_IF_WFILE(dot11MeshHWMPmaxPREQretries,
+- u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC, u8);
+-IEEE80211_IF_WFILE(path_refresh_time,
+- u.mesh.mshcfg.path_refresh_time, DEC, u32);
+-IEEE80211_IF_WFILE(min_discovery_timeout,
+- u.mesh.mshcfg.min_discovery_timeout, DEC, u16);
++IEEE80211_IF_FILE(dot11MeshMaxRetries,
++ u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
++IEEE80211_IF_FILE(dot11MeshRetryTimeout,
++ u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
++IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
++ u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
++IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
++ u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
++IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
++IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
++IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
++ u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
++IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout,
++ u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
++IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval,
++ u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
++IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime,
++ u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
++IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries,
++ u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
++IEEE80211_IF_FILE(path_refresh_time,
++ u.mesh.mshcfg.path_refresh_time, DEC);
++IEEE80211_IF_FILE(min_discovery_timeout,
++ u.mesh.mshcfg.min_discovery_timeout, DEC);
+ #endif
+
+
--- /dev/null
+Subject: mac80211: minor code cleanups
+
+Nothing very interesting, some checkpatch inspired stuff,
+some other things.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ net/mac80211/debugfs_sta.c | 6 +++---
+ net/mac80211/main.c | 2 +-
+ net/mac80211/mesh.c | 2 +-
+ net/mac80211/rc80211_pid.h | 2 +-
+ net/mac80211/rx.c | 24 +++++++++++++-----------
+ net/mac80211/sta_info.c | 4 ++--
+ net/mac80211/wep.c | 26 +++++++++++++-------------
+ net/mac80211/wep.h | 2 +-
+ net/mac80211/wpa.c | 29 ++++++++++-------------------
+ 9 files changed, 45 insertions(+), 52 deletions(-)
+
+--- everything.orig/net/mac80211/wep.c 2008-10-07 20:05:49.000000000 +0200
++++ everything/net/mac80211/wep.c 2008-10-07 20:06:41.000000000 +0200
+@@ -49,17 +49,19 @@ void ieee80211_wep_free(struct ieee80211
+ crypto_free_blkcipher(local->wep_rx_tfm);
+ }
+
+-static inline int ieee80211_wep_weak_iv(u32 iv, int keylen)
++static inline bool ieee80211_wep_weak_iv(u32 iv, int keylen)
+ {
+- /* Fluhrer, Mantin, and Shamir have reported weaknesses in the
++ /*
++ * Fluhrer, Mantin, and Shamir have reported weaknesses in the
+ * key scheduling algorithm of RC4. At least IVs (KeyByte + 3,
+- * 0xff, N) can be used to speedup attacks, so avoid using them. */
++ * 0xff, N) can be used to speedup attacks, so avoid using them.
++ */
+ if ((iv & 0xff00) == 0xff00) {
+ u8 B = (iv >> 16) & 0xff;
+ if (B >= 3 && B < 3 + keylen)
+- return 1;
++ return true;
+ }
+- return 0;
++ return false;
+ }
+
+
+@@ -268,7 +270,7 @@ int ieee80211_wep_decrypt(struct ieee802
+ }
+
+
+-u8 * ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key)
++bool ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key)
+ {
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ unsigned int hdrlen;
+@@ -276,16 +278,13 @@ u8 * ieee80211_wep_is_weak_iv(struct sk_
+ u32 iv;
+
+ if (!ieee80211_has_protected(hdr->frame_control))
+- return NULL;
++ return false;
+
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
+ ivpos = skb->data + hdrlen;
+ iv = (ivpos[0] << 16) | (ivpos[1] << 8) | ivpos[2];
+
+- if (ieee80211_wep_weak_iv(iv, key->conf.keylen))
+- return ivpos;
+-
+- return NULL;
++ return ieee80211_wep_weak_iv(iv, key->conf.keylen);
+ }
+
+ ieee80211_rx_result
+@@ -329,6 +328,8 @@ static int wep_encrypt_skb(struct ieee80
+ ieee80211_tx_result
+ ieee80211_crypto_wep_encrypt(struct ieee80211_tx_data *tx)
+ {
++ int i;
++
+ ieee80211_tx_set_protected(tx);
+
+ if (wep_encrypt_skb(tx, tx->skb) < 0) {
+@@ -337,9 +338,8 @@ ieee80211_crypto_wep_encrypt(struct ieee
+ }
+
+ if (tx->extra_frag) {
+- int i;
+ for (i = 0; i < tx->num_extra_frag; i++) {
+- if (wep_encrypt_skb(tx, tx->extra_frag[i]) < 0) {
++ if (wep_encrypt_skb(tx, tx->extra_frag[i])) {
+ I802_DEBUG_INC(tx->local->
+ tx_handlers_drop_wep);
+ return TX_DROP;
+--- everything.orig/net/mac80211/wep.h 2008-10-07 20:05:28.000000000 +0200
++++ everything/net/mac80211/wep.h 2008-10-07 20:06:41.000000000 +0200
+@@ -26,7 +26,7 @@ int ieee80211_wep_encrypt(struct ieee802
+ struct ieee80211_key *key);
+ int ieee80211_wep_decrypt(struct ieee80211_local *local, struct sk_buff *skb,
+ struct ieee80211_key *key);
+-u8 *ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key);
++bool ieee80211_wep_is_weak_iv(struct sk_buff *skb, struct ieee80211_key *key);
+
+ ieee80211_rx_result
+ ieee80211_crypto_wep_decrypt(struct ieee80211_rx_data *rx);
+--- everything.orig/net/mac80211/wpa.c 2008-10-07 20:05:49.000000000 +0200
++++ everything/net/mac80211/wpa.c 2008-10-07 20:06:41.000000000 +0200
+@@ -49,8 +49,7 @@ ieee80211_tx_h_michael_mic_add(struct ie
+ !(tx->flags & IEEE80211_TX_FRAGMENTED) &&
+ !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) &&
+ !wpa_test) {
+- /* hwaccel - with no need for preallocated room for Michael MIC
+- */
++ /* hwaccel - with no need for preallocated room for MMIC */
+ return TX_CONTINUE;
+ }
+
+@@ -67,8 +66,6 @@ ieee80211_tx_h_michael_mic_add(struct ie
+ #else
+ authenticator = 1;
+ #endif
+- /* At this point we know we're using ALG_TKIP. To get the MIC key
+- * we now will rely on the offset from the ieee80211_key_conf::key */
+ key_offset = authenticator ?
+ NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY :
+ NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY;
+@@ -92,9 +89,7 @@ ieee80211_rx_h_michael_mic_verify(struct
+ int authenticator = 1, wpa_test = 0;
+ DECLARE_MAC_BUF(mac);
+
+- /*
+- * No way to verify the MIC if the hardware stripped it
+- */
++ /* No way to verify the MIC if the hardware stripped it */
+ if (rx->status->flag & RX_FLAG_MMIC_STRIPPED)
+ return RX_CONTINUE;
+
+@@ -116,8 +111,6 @@ ieee80211_rx_h_michael_mic_verify(struct
+ #else
+ authenticator = 1;
+ #endif
+- /* At this point we know we're using ALG_TKIP. To get the MIC key
+- * we now will rely on the offset from the ieee80211_key_conf::key */
+ key_offset = authenticator ?
+ NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY :
+ NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY;
+@@ -202,6 +195,7 @@ ieee80211_tx_result
+ ieee80211_crypto_tkip_encrypt(struct ieee80211_tx_data *tx)
+ {
+ struct sk_buff *skb = tx->skb;
++ int i;
+
+ ieee80211_tx_set_protected(tx);
+
+@@ -209,9 +203,8 @@ ieee80211_crypto_tkip_encrypt(struct iee
+ return TX_DROP;
+
+ if (tx->extra_frag) {
+- int i;
+ for (i = 0; i < tx->num_extra_frag; i++) {
+- if (tkip_encrypt_skb(tx, tx->extra_frag[i]) < 0)
++ if (tkip_encrypt_skb(tx, tx->extra_frag[i]))
+ return TX_DROP;
+ }
+ }
+@@ -350,7 +343,7 @@ static inline void ccmp_pn2hdr(u8 *hdr,
+ }
+
+
+-static inline int ccmp_hdr2pn(u8 *pn, u8 *hdr)
++static inline void ccmp_hdr2pn(u8 *pn, u8 *hdr)
+ {
+ pn[0] = hdr[7];
+ pn[1] = hdr[6];
+@@ -358,7 +351,6 @@ static inline int ccmp_hdr2pn(u8 *pn, u8
+ pn[3] = hdr[4];
+ pn[4] = hdr[1];
+ pn[5] = hdr[0];
+- return (hdr[3] >> 6) & 0x03;
+ }
+
+
+@@ -373,7 +365,7 @@ static int ccmp_encrypt_skb(struct ieee8
+
+ if ((tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) &&
+ !(tx->key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) {
+- /* hwaccel - with no need for preallocated room for CCMP "
++ /* hwaccel - with no need for preallocated room for CCMP
+ * header or MIC fields */
+ info->control.hw_key = &tx->key->conf;
+ return 0;
+@@ -426,6 +418,7 @@ ieee80211_tx_result
+ ieee80211_crypto_ccmp_encrypt(struct ieee80211_tx_data *tx)
+ {
+ struct sk_buff *skb = tx->skb;
++ int i;
+
+ ieee80211_tx_set_protected(tx);
+
+@@ -433,9 +426,8 @@ ieee80211_crypto_ccmp_encrypt(struct iee
+ return TX_DROP;
+
+ if (tx->extra_frag) {
+- int i;
+ for (i = 0; i < tx->num_extra_frag; i++) {
+- if (ccmp_encrypt_skb(tx, tx->extra_frag[i]) < 0)
++ if (ccmp_encrypt_skb(tx, tx->extra_frag[i]))
+ return TX_DROP;
+ }
+ }
+@@ -468,7 +460,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+ (rx->status->flag & RX_FLAG_IV_STRIPPED))
+ return RX_CONTINUE;
+
+- (void) ccmp_hdr2pn(pn, skb->data + hdrlen);
++ ccmp_hdr2pn(pn, skb->data + hdrlen);
+
+ if (memcmp(pn, key->u.ccmp.rx_pn[rx->queue], CCMP_PN_LEN) <= 0) {
+ key->u.ccmp.replays++;
+@@ -483,9 +475,8 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+ key->u.ccmp.tfm, key->u.ccmp.rx_crypto_buf,
+ skb->data + hdrlen + CCMP_HDR_LEN, data_len,
+ skb->data + skb->len - CCMP_MIC_LEN,
+- skb->data + hdrlen + CCMP_HDR_LEN)) {
++ skb->data + hdrlen + CCMP_HDR_LEN))
+ return RX_DROP_UNUSABLE;
+- }
+ }
+
+ memcpy(key->u.ccmp.rx_pn[rx->queue], pn, CCMP_PN_LEN);
+--- everything.orig/net/mac80211/debugfs_sta.c 2008-10-07 20:06:40.000000000 +0200
++++ everything/net/mac80211/debugfs_sta.c 2008-10-07 20:06:41.000000000 +0200
+@@ -137,7 +137,7 @@ static ssize_t sta_agg_status_read(struc
+ p += scnprintf(p, sizeof(buf)+buf-p, "\n DTKN:");
+ for (i = 0; i < STA_TID_NUM; i++)
+ p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
+- sta->ampdu_mlme.tid_state_rx[i]?
++ sta->ampdu_mlme.tid_state_rx[i] ?
+ sta->ampdu_mlme.tid_rx[i]->dialog_token : 0);
+
+ p += scnprintf(p, sizeof(buf)+buf-p, "\n TX :");
+@@ -148,13 +148,13 @@ static ssize_t sta_agg_status_read(struc
+ p += scnprintf(p, sizeof(buf)+buf-p, "\n DTKN:");
+ for (i = 0; i < STA_TID_NUM; i++)
+ p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
+- sta->ampdu_mlme.tid_state_tx[i]?
++ sta->ampdu_mlme.tid_state_tx[i] ?
+ sta->ampdu_mlme.tid_tx[i]->dialog_token : 0);
+
+ p += scnprintf(p, sizeof(buf)+buf-p, "\n SSN :");
+ for (i = 0; i < STA_TID_NUM; i++)
+ p += scnprintf(p, sizeof(buf)+buf-p, "%5d",
+- sta->ampdu_mlme.tid_state_tx[i]?
++ sta->ampdu_mlme.tid_state_tx[i] ?
+ sta->ampdu_mlme.tid_tx[i]->ssn : 0);
+
+ p += scnprintf(p, sizeof(buf)+buf-p, "\n");
+--- everything.orig/net/mac80211/main.c 2008-10-07 20:05:49.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-07 20:06:41.000000000 +0200
+@@ -1013,7 +1013,7 @@ static int __init ieee80211_init(void)
+
+ BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
+ BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
+- IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
++ IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
+
+ ret = rc80211_minstrel_init();
+ if (ret)
+--- everything.orig/net/mac80211/mesh.c 2008-10-07 20:05:28.000000000 +0200
++++ everything/net/mac80211/mesh.c 2008-10-07 20:06:41.000000000 +0200
+@@ -473,7 +473,7 @@ static void ieee80211_mesh_rx_bcn_presp(
+ size_t len,
+ struct ieee80211_rx_status *rx_status)
+ {
+- struct ieee80211_local *local= sdata->local;
++ struct ieee80211_local *local = sdata->local;
+ struct ieee802_11_elems elems;
+ struct ieee80211_channel *channel;
+ u64 supp_rates = 0;
+--- everything.orig/net/mac80211/rc80211_pid.h 2008-10-07 20:05:28.000000000 +0200
++++ everything/net/mac80211/rc80211_pid.h 2008-10-07 20:06:41.000000000 +0200
+@@ -49,7 +49,7 @@
+
+ /* Arithmetic right shift for positive and negative values for ISO C. */
+ #define RC_PID_DO_ARITH_RIGHT_SHIFT(x, y) \
+- (x) < 0 ? -((-(x)) >> (y)) : (x) >> (y)
++ ((x) < 0 ? -((-(x)) >> (y)) : (x) >> (y))
+
+ enum rc_pid_event_type {
+ RC_PID_EVENT_TYPE_TX_STATUS,
+--- everything.orig/net/mac80211/rx.c 2008-10-07 20:06:38.000000000 +0200
++++ everything/net/mac80211/rx.c 2008-10-07 20:06:41.000000000 +0200
+@@ -26,10 +26,11 @@
+ #include "tkip.h"
+ #include "wme.h"
+
+-u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
+- struct tid_ampdu_rx *tid_agg_rx,
+- struct sk_buff *skb, u16 mpdu_seq_num,
+- int bar_req);
++static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
++ struct tid_ampdu_rx *tid_agg_rx,
++ struct sk_buff *skb,
++ u16 mpdu_seq_num,
++ int bar_req);
+ /*
+ * monitor mode reception
+ *
+@@ -2000,17 +2001,17 @@ static void __ieee80211_rx_handle_packet
+
+ static inline int seq_less(u16 sq1, u16 sq2)
+ {
+- return (((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1));
++ return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
+ }
+
+ static inline u16 seq_inc(u16 sq)
+ {
+- return ((sq + 1) & SEQ_MASK);
++ return (sq + 1) & SEQ_MASK;
+ }
+
+ static inline u16 seq_sub(u16 sq1, u16 sq2)
+ {
+- return ((sq1 - sq2) & SEQ_MASK);
++ return (sq1 - sq2) & SEQ_MASK;
+ }
+
+
+@@ -2018,10 +2019,11 @@ static inline u16 seq_sub(u16 sq1, u16 s
+ * As it function blongs to Rx path it must be called with
+ * the proper rcu_read_lock protection for its flow.
+ */
+-u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
+- struct tid_ampdu_rx *tid_agg_rx,
+- struct sk_buff *skb, u16 mpdu_seq_num,
+- int bar_req)
++static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
++ struct tid_ampdu_rx *tid_agg_rx,
++ struct sk_buff *skb,
++ u16 mpdu_seq_num,
++ int bar_req)
+ {
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_rx_status status;
+--- everything.orig/net/mac80211/sta_info.c 2008-10-07 20:06:39.000000000 +0200
++++ everything/net/mac80211/sta_info.c 2008-10-07 20:06:41.000000000 +0200
+@@ -294,7 +294,7 @@ int sta_info_insert(struct sta_info *sta
+ }
+
+ if (WARN_ON(compare_ether_addr(sta->sta.addr, sdata->dev->dev_addr) == 0 ||
+- is_multicast_ether_addr(sta->sta.addr))) {
++ is_multicast_ether_addr(sta->sta.addr))) {
+ err = -EINVAL;
+ goto out_free;
+ }
+@@ -830,7 +830,7 @@ void ieee80211_sta_expire(struct ieee802
+ }
+
+ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
+- const u8 *addr)
++ const u8 *addr)
+ {
+ struct sta_info *sta = sta_info_get(hw_to_local(hw), addr);
+
--- /dev/null
+Subject: mac80211: remove wiphy_to_hw
+
+This isn't used by anyone, if we ever need it we can add
+it back, until then it's useless.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ include/net/mac80211.h | 2 --
+ net/mac80211/cfg.c | 7 -------
+ 2 files changed, 9 deletions(-)
+
+--- everything.orig/include/net/mac80211.h 2008-10-07 20:05:49.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-07 20:06:42.000000000 +0200
+@@ -867,8 +867,6 @@ struct ieee80211_hw {
+ u8 max_altrate_tries;
+ };
+
+-struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy);
+-
+ /**
+ * SET_IEEE80211_DEV - set device for 802.11 hardware
+ *
+--- everything.orig/net/mac80211/cfg.c 2008-10-07 20:06:37.000000000 +0200
++++ everything/net/mac80211/cfg.c 2008-10-07 20:06:42.000000000 +0200
+@@ -17,13 +17,6 @@
+ #include "rate.h"
+ #include "mesh.h"
+
+-struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy)
+-{
+- struct ieee80211_local *local = wiphy_priv(wiphy);
+- return &local->hw;
+-}
+-EXPORT_SYMBOL(wiphy_to_hw);
+-
+ static bool nl80211_type_check(enum nl80211_iftype type)
+ {
+ switch (type) {
--- /dev/null
+Subject: mac80211: clean up ieee80211_hw_config errors
+
+Warn when ieee80211_hw_config returns an error, it shouldn't
+happen; remove a number of printks that would happen in such
+a case and one printk that is user-triggerable.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ net/mac80211/cfg.c | 3 +--
+ net/mac80211/main.c | 8 +++++++-
+ net/mac80211/scan.c | 16 +++-------------
+ net/mac80211/util.c | 5 +----
+ net/mac80211/wext.c | 6 +-----
+ 5 files changed, 13 insertions(+), 25 deletions(-)
+
+--- everything.orig/net/mac80211/cfg.c 2008-10-07 20:06:42.000000000 +0200
++++ everything/net/mac80211/cfg.c 2008-10-07 20:06:43.000000000 +0200
+@@ -396,8 +396,7 @@ static int ieee80211_config_beacon(struc
+ */
+ if (params->interval) {
+ sdata->local->hw.conf.beacon_int = params->interval;
+- if (ieee80211_hw_config(sdata->local))
+- return -EINVAL;
++ ieee80211_hw_config(sdata->local);
+ /*
+ * We updated some parameter so if below bails out
+ * it's not an error.
+--- everything.orig/net/mac80211/main.c 2008-10-07 20:06:41.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-07 20:06:43.000000000 +0200
+@@ -222,8 +222,14 @@ int ieee80211_hw_config(struct ieee80211
+ wiphy_name(local->hw.wiphy), chan->center_freq);
+ #endif
+
+- if (local->open_count)
++ if (local->open_count) {
+ ret = local->ops->config(local_to_hw(local), &local->hw.conf);
++ /*
++ * HW reconfiguration should never fail, the driver has told
++ * us what it can support so it should live up to that promise.
++ */
++ WARN_ON(ret);
++ }
+
+ return ret;
+ }
+--- everything.orig/net/mac80211/scan.c 2008-10-07 20:05:27.000000000 +0200
++++ everything/net/mac80211/scan.c 2008-10-07 20:06:43.000000000 +0200
+@@ -447,18 +447,12 @@ void ieee80211_scan_completed(struct iee
+
+ if (local->hw_scanning) {
+ local->hw_scanning = false;
+- if (ieee80211_hw_config(local))
+- printk(KERN_DEBUG "%s: failed to restore operational "
+- "channel after scan\n", wiphy_name(local->hw.wiphy));
+-
++ ieee80211_hw_config(local);
+ goto done;
+ }
+
+ local->sw_scanning = false;
+- if (ieee80211_hw_config(local))
+- printk(KERN_DEBUG "%s: failed to restore operational "
+- "channel after scan\n", wiphy_name(local->hw.wiphy));
+-
++ ieee80211_hw_config(local);
+
+ netif_tx_lock_bh(local->mdev);
+ netif_addr_lock(local->mdev);
+@@ -545,12 +539,8 @@ void ieee80211_scan_work(struct work_str
+
+ if (!skip) {
+ local->scan_channel = chan;
+- if (ieee80211_hw_config(local)) {
+- printk(KERN_DEBUG "%s: failed to set freq to "
+- "%d MHz for scan\n", wiphy_name(local->hw.wiphy),
+- chan->center_freq);
++ if (ieee80211_hw_config(local))
+ skip = 1;
+- }
+ }
+
+ /* advance state machine to next channel/band */
+--- everything.orig/net/mac80211/util.c 2008-10-07 20:05:27.000000000 +0200
++++ everything/net/mac80211/util.c 2008-10-07 20:06:43.000000000 +0200
+@@ -638,11 +638,8 @@ int ieee80211_set_freq(struct ieee80211_
+
+ if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
+ if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+- chan->flags & IEEE80211_CHAN_NO_IBSS) {
+- printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
+- "%d MHz\n", sdata->dev->name, chan->center_freq);
++ chan->flags & IEEE80211_CHAN_NO_IBSS)
+ return ret;
+- }
+ local->oper_channel = chan;
+
+ if (local->sw_scanning || local->hw_scanning)
+--- everything.orig/net/mac80211/wext.c 2008-10-07 20:05:27.000000000 +0200
++++ everything/net/mac80211/wext.c 2008-10-07 20:06:43.000000000 +0200
+@@ -689,12 +689,8 @@ static int ieee80211_ioctl_siwtxpower(st
+ ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+ }
+
+- if (need_reconfig) {
++ if (need_reconfig)
+ ieee80211_hw_config(local);
+- /* The return value of hw_config is not of big interest here,
+- * as it doesn't say that it failed because of _this_ config
+- * change or something else. Ignore it. */
+- }
+
+ return 0;
+ }
--- /dev/null
+Subject: mac80211: remove max_antenna_gain config
+
+The antenna gain isn't exactly configurable, despite the belief of
+some unnamed individual who thinks that the EEPROM might influence
+it.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ include/net/mac80211.h | 2 --
+ net/mac80211/main.c | 2 --
+ 2 files changed, 4 deletions(-)
+
+--- everything.orig/include/net/mac80211.h 2008-10-07 20:06:42.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-07 20:06:43.000000000 +0200
+@@ -470,7 +470,6 @@ enum ieee80211_conf_flags {
+ * @listen_interval: listen interval in units of beacon interval
+ * @flags: configuration flags defined above
+ * @power_level: requested transmit power (in dBm)
+- * @max_antenna_gain: maximum antenna gain (in dBi)
+ * @antenna_sel_tx: transmit antenna selection, 0: default/diversity,
+ * 1/2: antenna 0/1
+ * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx
+@@ -485,7 +484,6 @@ struct ieee80211_conf {
+ u16 listen_interval;
+ u32 flags;
+ int power_level;
+- int max_antenna_gain;
+ u8 antenna_sel_tx;
+ u8 antenna_sel_rx;
+
+--- everything.orig/net/mac80211/main.c 2008-10-07 20:06:43.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-07 20:06:43.000000000 +0200
+@@ -215,8 +215,6 @@ int ieee80211_hw_config(struct ieee80211
+ local->hw.conf.power_level = min(chan->max_power,
+ local->hw.conf.power_level);
+
+- local->hw.conf.max_antenna_gain = chan->max_antenna_gain;
+-
+ #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
+ wiphy_name(local->hw.wiphy), chan->center_freq);
--- /dev/null
+Subject: mac80211: fix short slot handling
+
+This patch makes mac80211 handle short slot requests from the AP
+properly. Also warn about uses of IEEE80211_CONF_SHORT_SLOT_TIME
+and optimise out the code since it cannot ever be hit anyway.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ include/net/mac80211.h | 28 ++++++++++--------
+ net/mac80211/main.c | 9 +++--
+ net/mac80211/mlme.c | 74 ++++++++++++++++++++++++++-----------------------
+ 3 files changed, 62 insertions(+), 49 deletions(-)
+
+--- everything.orig/net/mac80211/main.c 2008-10-07 20:06:43.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-08 10:56:29.000000000 +0200
+@@ -346,9 +346,12 @@ void ieee80211_bss_info_change_notify(st
+
+ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
+ {
+- sdata->bss_conf.use_cts_prot = 0;
+- sdata->bss_conf.use_short_preamble = 0;
+- return BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE;
++ sdata->bss_conf.use_cts_prot = false;
++ sdata->bss_conf.use_short_preamble = false;
++ sdata->bss_conf.use_short_slot = false;
++ return BSS_CHANGED_ERP_CTS_PROT |
++ BSS_CHANGED_ERP_PREAMBLE |
++ BSS_CHANGED_ERP_SLOT;
+ }
+
+ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
+--- everything.orig/net/mac80211/mlme.c 2008-10-07 20:05:49.000000000 +0200
++++ everything/net/mac80211/mlme.c 2008-10-08 10:56:38.000000000 +0200
+@@ -568,9 +568,8 @@ static void ieee80211_sta_wmm_params(str
+ }
+ }
+
+-static u32 ieee80211_handle_protect_preamb(struct ieee80211_sub_if_data *sdata,
+- bool use_protection,
+- bool use_short_preamble)
++static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
++ u16 capab, bool erp_valid, u8 erp)
+ {
+ struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
+ #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+@@ -578,6 +577,19 @@ static u32 ieee80211_handle_protect_prea
+ DECLARE_MAC_BUF(mac);
+ #endif
+ u32 changed = 0;
++ bool use_protection;
++ bool use_short_preamble;
++ bool use_short_slot;
++
++ if (erp_valid) {
++ use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
++ use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
++ } else {
++ use_protection = false;
++ use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
++ }
++
++ use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
+
+ if (use_protection != bss_conf->use_cts_prot) {
+ #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+@@ -607,30 +619,18 @@ static u32 ieee80211_handle_protect_prea
+ changed |= BSS_CHANGED_ERP_PREAMBLE;
+ }
+
+- return changed;
+-}
+-
+-static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
+- u8 erp_value)
+-{
+- bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
+- bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
+-
+- return ieee80211_handle_protect_preamb(sdata,
+- use_protection, use_short_preamble);
+-}
+-
+-static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
+- struct ieee80211_bss *bss)
+-{
+- u32 changed = 0;
+-
+- if (bss->has_erp_value)
+- changed |= ieee80211_handle_erp_ie(sdata, bss->erp_value);
+- else {
+- u16 capab = bss->capability;
+- changed |= ieee80211_handle_protect_preamb(sdata, false,
+- (capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
++ if (use_short_slot != bss_conf->use_short_slot) {
++#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
++ if (net_ratelimit()) {
++ printk(KERN_DEBUG "%s: switched to %s slot"
++ " (BSSID=%s)\n",
++ sdata->dev->name,
++ use_short_slot ? "short" : "long",
++ print_mac(mac, ifsta->bssid));
++ }
++#endif
++ bss_conf->use_short_slot = use_short_slot;
++ changed |= BSS_CHANGED_ERP_SLOT;
+ }
+
+ return changed;
+@@ -723,7 +723,8 @@ static void ieee80211_set_associated(str
+ sdata->bss_conf.timestamp = bss->timestamp;
+ sdata->bss_conf.dtim_period = bss->dtim_period;
+
+- changed |= ieee80211_handle_bss_capability(sdata, bss);
++ changed |= ieee80211_handle_bss_capability(sdata,
++ bss->capability, bss->has_erp_value, bss->erp_value);
+
+ ieee80211_rx_bss_put(local, bss);
+ }
+@@ -1675,6 +1676,8 @@ static void ieee80211_rx_mgmt_beacon(str
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_conf *conf = &local->hw.conf;
+ u32 changed = 0;
++ bool erp_valid;
++ u8 erp_value = 0;
+
+ /* Process beacon from the current BSS */
+ baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
+@@ -1696,13 +1699,16 @@ static void ieee80211_rx_mgmt_beacon(str
+ ieee80211_sta_wmm_params(local, ifsta, elems.wmm_param,
+ elems.wmm_param_len);
+
+- if (elems.erp_info && elems.erp_info_len >= 1)
+- changed |= ieee80211_handle_erp_ie(sdata, elems.erp_info[0]);
+- else {
+- u16 capab = le16_to_cpu(mgmt->u.beacon.capab_info);
+- changed |= ieee80211_handle_protect_preamb(sdata, false,
+- (capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
++
++ if (elems.erp_info && elems.erp_info_len >= 1) {
++ erp_valid = true;
++ erp_value = elems.erp_info[0];
++ } else {
++ erp_valid = false;
+ }
++ changed |= ieee80211_handle_bss_capability(sdata,
++ le16_to_cpu(mgmt->u.beacon.capab_info),
++ erp_valid, erp_value);
+
+ if (elems.ht_cap_elem && elems.ht_info_elem &&
+ elems.wmm_param && conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+--- everything.orig/include/net/mac80211.h 2008-10-07 20:06:43.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-08 10:57:06.000000000 +0200
+@@ -180,8 +180,12 @@ enum ieee80211_bss_change {
+ * @assoc: association status
+ * @aid: association ID number, valid only when @assoc is true
+ * @use_cts_prot: use CTS protection
+- * @use_short_preamble: use 802.11b short preamble
+- * @use_short_slot: use short slot time (only relevant for ERP)
++ * @use_short_preamble: use 802.11b short preamble;
++ * if the hardware cannot handle this it must set the
++ * IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag
++ * @use_short_slot: use short slot time (only relevant for ERP);
++ * if the hardware cannot handle this it must set the
++ * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
+ * @dtim_period: num of beacons before the next DTIM, for PSM
+ * @timestamp: beacon timestamp
+ * @beacon_int: beacon interval
+@@ -442,23 +446,23 @@ struct ieee80211_rx_status {
+ *
+ * Flags to define PHY configuration options
+ *
+- * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time
+ * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
+ * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported)
+ * @IEEE80211_CONF_PS: Enable 802.11 power save mode
+ */
+ enum ieee80211_conf_flags {
+- /*
+- * TODO: IEEE80211_CONF_SHORT_SLOT_TIME will be removed once drivers
+- * have been converted to use bss_info_changed() for slot time
+- * configuration
+- */
+- IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0),
+- IEEE80211_CONF_RADIOTAP = (1<<1),
+- IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2),
+- IEEE80211_CONF_PS = (1<<3),
++ IEEE80211_CONF_RADIOTAP = (1<<0),
++ IEEE80211_CONF_SUPPORT_HT_MODE = (1<<1),
++ IEEE80211_CONF_PS = (1<<2),
+ };
+
++/* XXX: remove all this once drivers stop trying to use it */
++static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
++{
++ return 0;
++}
++#define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
++
+ /**
+ * struct ieee80211_conf - configuration of the device
+ *
--- /dev/null
+Subject: mac80211: fix HT information element parsing
+
+There's no checking that the HT IEs are of the right length
+which can be used by an attacker to cause an out-of-bounds
+access by sending a too short HT information/capability IE.
+Fix it by simply pretending those IEs didn't exist when too
+short.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ net/mac80211/ieee80211_i.h | 6 ++----
+ net/mac80211/mlme.c | 3 ---
+ net/mac80211/util.c | 8 ++++----
+ 3 files changed, 6 insertions(+), 11 deletions(-)
+
+--- everything.orig/net/mac80211/ieee80211_i.h 2008-10-07 20:05:26.000000000 +0200
++++ everything/net/mac80211/ieee80211_i.h 2008-10-07 20:06:45.000000000 +0200
+@@ -816,8 +816,8 @@ struct ieee802_11_elems {
+ u8 *ext_supp_rates;
+ u8 *wmm_info;
+ u8 *wmm_param;
+- u8 *ht_cap_elem;
+- u8 *ht_info_elem;
++ struct ieee80211_ht_cap *ht_cap_elem;
++ struct ieee80211_ht_addt_info *ht_info_elem;
+ u8 *mesh_config;
+ u8 *mesh_id;
+ u8 *peer_link;
+@@ -844,8 +844,6 @@ struct ieee802_11_elems {
+ u8 ext_supp_rates_len;
+ u8 wmm_info_len;
+ u8 wmm_param_len;
+- u8 ht_cap_elem_len;
+- u8 ht_info_elem_len;
+ u8 mesh_config_len;
+ u8 mesh_id_len;
+ u8 peer_link_len;
+--- everything.orig/net/mac80211/mlme.c 2008-10-07 20:06:44.000000000 +0200
++++ everything/net/mac80211/mlme.c 2008-10-07 20:06:45.000000000 +0200
+@@ -1349,10 +1349,8 @@ static void ieee80211_rx_mgmt_assoc_resp
+ (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
+ struct ieee80211_ht_bss_info bss_info;
+ ieee80211_ht_cap_ie_to_ht_info(
+- (struct ieee80211_ht_cap *)
+ elems.ht_cap_elem, &sta->sta.ht_info);
+ ieee80211_ht_addt_info_ie_to_ht_bss_info(
+- (struct ieee80211_ht_addt_info *)
+ elems.ht_info_elem, &bss_info);
+ ieee80211_handle_ht(local, 1, &sta->sta.ht_info, &bss_info);
+ }
+@@ -1715,7 +1713,6 @@ static void ieee80211_rx_mgmt_beacon(str
+ struct ieee80211_ht_bss_info bss_info;
+
+ ieee80211_ht_addt_info_ie_to_ht_bss_info(
+- (struct ieee80211_ht_addt_info *)
+ elems.ht_info_elem, &bss_info);
+ changed |= ieee80211_handle_ht(local, 1, &conf->ht_conf,
+ &bss_info);
+--- everything.orig/net/mac80211/util.c 2008-10-07 20:06:43.000000000 +0200
++++ everything/net/mac80211/util.c 2008-10-07 20:06:45.000000000 +0200
+@@ -529,12 +529,12 @@ void ieee802_11_parse_elems(u8 *start, s
+ elems->ext_supp_rates_len = elen;
+ break;
+ case WLAN_EID_HT_CAPABILITY:
+- elems->ht_cap_elem = pos;
+- elems->ht_cap_elem_len = elen;
++ if (elen >= sizeof(struct ieee80211_ht_cap))
++ elems->ht_cap_elem = (void *)pos;
+ break;
+ case WLAN_EID_HT_EXTRA_INFO:
+- elems->ht_info_elem = pos;
+- elems->ht_info_elem_len = elen;
++ if (elen >= sizeof(struct ieee80211_ht_addt_info))
++ elems->ht_info_elem = (void *)pos;
+ break;
+ case WLAN_EID_MESH_ID:
+ elems->mesh_id = pos;
--- /dev/null
+Subject: mac80211: fix debugfs netdev rename
+
+If, for some reason, a netdev has no debugfs dir, we shouldn't
+try to rename that dir.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+Cc: Robin Holt <holt@sgi.com>
+---
+ net/mac80211/debugfs_netdev.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+--- everything.orig/net/mac80211/debugfs_netdev.c 2008-10-08 10:08:23.000000000 +0200
++++ everything/net/mac80211/debugfs_netdev.c 2008-10-08 10:22:52.000000000 +0200
+@@ -481,8 +481,12 @@ static int netdev_notify(struct notifier
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+- sprintf(buf, "netdev:%s", dev->name);
+ dir = sdata->debugfsdir;
++
++ if (!dir)
++ return 0;
++
++ sprintf(buf, "netdev:%s", dev->name);
+ if (!debugfs_rename(dir->d_parent, dir, dir->d_parent, buf))
+ printk(KERN_ERR "mac80211: debugfs: failed to rename debugfs "
+ "dir to %s\n", buf);
--- /dev/null
+Subject: cfg80211: fix debugfs error handling
+
+If something goes wrong creating the debugfs dir or when
+debugfs is not compiled in, the current code might lead to
+trouble; make it more robust.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ net/wireless/core.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- everything.orig/net/wireless/core.c 2008-10-08 10:13:49.000000000 +0200
++++ everything/net/wireless/core.c 2008-10-08 10:19:10.000000000 +0200
+@@ -185,7 +185,8 @@ int cfg80211_dev_rename(struct cfg80211_
+ if (result)
+ goto out_unlock;
+
+- if (!debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
++ if (rdev->wiphy.debugfsdir &&
++ !debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
+ rdev->wiphy.debugfsdir,
+ rdev->wiphy.debugfsdir->d_parent,
+ newname))
+@@ -318,6 +319,8 @@ int wiphy_register(struct wiphy *wiphy)
+ drv->wiphy.debugfsdir =
+ debugfs_create_dir(wiphy_name(&drv->wiphy),
+ ieee80211_debugfs_dir);
++ if (IS_ERR(drv->wiphy.debugfsdir))
++ drv->wiphy.debugfsdir = NULL;
+
+ res = 0;
+ out_unlock:
--- /dev/null
+Subject: 802.11: clean up/fix HT support
+
+This patch cleans up a number of things:
+ * the unusable definition of the HT capabilities/HT information
+ information elements
+ * variable names that are hard to understand
+ * mac80211: move ieee80211_handle_ht to ht.c and remove the unused
+ enable_ht parameter
+ * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht
+ * mac80211: fix bug with casting the result of ieee80211_bss_get_ie
+ to an information element _contents_ rather than the
+ whole element, add size checking (another out-of-bounds
+ access bug fixed!)
+ * mac80211: remove some unused return values in favour of BUG_ON
+ checking
+ * a few minor other things
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ drivers/net/wireless/ath9k/main.c | 57 +++++------
+ drivers/net/wireless/ath9k/rc.c | 10 -
+ drivers/net/wireless/ath9k/rc.h | 1
+ drivers/net/wireless/ath9k/recv.c | 2
+ drivers/net/wireless/ath9k/xmit.c | 2
+ drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 18 +--
+ drivers/net/wireless/iwlwifi/iwl-agn.c | 20 +--
+ drivers/net/wireless/iwlwifi/iwl-core.c | 71 +++++++-------
+ drivers/net/wireless/iwlwifi/iwl-core.h | 2
+ drivers/net/wireless/iwlwifi/iwl-dev.h | 4
+ drivers/net/wireless/iwlwifi/iwl-scan.c | 12 +-
+ drivers/net/wireless/iwlwifi/iwl-sta.c | 6 -
+ drivers/net/wireless/mac80211_hwsim.c | 19 +--
+ include/linux/ieee80211.h | 133 ++++++++++++++++++--------
+ include/net/mac80211.h | 12 +-
+ include/net/wireless.h | 15 +-
+ net/mac80211/cfg.c | 7 -
+ net/mac80211/ht.c | 151 +++++++++++++++++++++++++-----
+ net/mac80211/ieee80211_i.h | 16 +--
+ net/mac80211/main.c | 94 ------------------
+ net/mac80211/mlme.c | 45 ++++----
+ net/mac80211/util.c | 4
+ net/mac80211/wext.c | 4
+ 23 files changed, 386 insertions(+), 319 deletions(-)
+
+--- everything.orig/include/linux/ieee80211.h 2008-10-08 20:44:47.000000000 +0200
++++ everything/include/linux/ieee80211.h 2008-10-09 02:16:21.000000000 +0200
+@@ -685,28 +685,88 @@ struct ieee80211_bar {
+ #define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
+ #define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
+
++
++#define IEEE80211_HT_MCS_MASK_LEN 10
++
++/**
++ * struct ieee80211_mcs_info - MCS information
++ * @rx_mask: RX mask
++ * @rx_highest: highest supported RX rate
++ * @tx_params: TX parameters
++ */
++struct ieee80211_mcs_info {
++ u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
++ __le16 rx_highest;
++ u8 tx_params;
++ u8 reserved[3];
++} __attribute__((packed));
++
++/* 802.11n HT capability MSC set */
++#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff
++#define IEEE80211_HT_MCS_TX_DEFINED 0x01
++#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02
++/* value 0 == 1 stream etc */
++#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C
++#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2
++#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4
++#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10
++
++/*
++ * 802.11n D5.0 20.3.5 / 20.6 says:
++ * - indices 0 to 7 and 32 are single spatial stream
++ * - 8 to 31 are multiple spatial streams using equal modulation
++ * [8..15 for two streams, 16..23 for three and 24..31 for four]
++ * - remainder are multiple spatial streams using unequal modulation
++ */
++#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
++#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
++ (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
++
+ /**
+ * struct ieee80211_ht_cap - HT capabilities
+ *
+- * This structure refers to "HT capabilities element" as
+- * described in 802.11n draft section 7.3.2.52
++ * This structure is the "HT capabilities element" as
++ * described in 802.11n D5.0 7.3.2.57
+ */
+ struct ieee80211_ht_cap {
+ __le16 cap_info;
+ u8 ampdu_params_info;
+- u8 supp_mcs_set[16];
++
++ /* 16 bytes MCS information */
++ struct ieee80211_mcs_info mcs;
++
+ __le16 extended_ht_cap_info;
+ __le32 tx_BF_cap_info;
+ u8 antenna_selection_info;
+ } __attribute__ ((packed));
+
++/* 802.11n HT capabilities masks (for cap_info) */
++#define IEEE80211_HT_CAP_LDPC_CODING 0x0001
++#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002
++#define IEEE80211_HT_CAP_SM_PS 0x000C
++#define IEEE80211_HT_CAP_GRN_FLD 0x0010
++#define IEEE80211_HT_CAP_SGI_20 0x0020
++#define IEEE80211_HT_CAP_SGI_40 0x0040
++#define IEEE80211_HT_CAP_TX_STBC 0x0080
++#define IEEE80211_HT_CAP_RX_STBC 0x0300
++#define IEEE80211_HT_CAP_DELAY_BA 0x0400
++#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
++#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
++#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000
++#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
++#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
++
++/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
++#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
++#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
++
+ /**
+- * struct ieee80211_ht_cap - HT additional information
++ * struct ieee80211_ht_info - HT information
+ *
+- * This structure refers to "HT information element" as
+- * described in 802.11n draft section 7.3.2.53
++ * This structure is the "HT information element" as
++ * described in 802.11n D5.0 7.3.2.58
+ */
+-struct ieee80211_ht_addt_info {
++struct ieee80211_ht_info {
+ u8 control_chan;
+ u8 ht_param;
+ __le16 operation_mode;
+@@ -714,36 +774,33 @@ struct ieee80211_ht_addt_info {
+ u8 basic_set[16];
+ } __attribute__ ((packed));
+
+-/* 802.11n HT capabilities masks */
+-#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002
+-#define IEEE80211_HT_CAP_SM_PS 0x000C
+-#define IEEE80211_HT_CAP_GRN_FLD 0x0010
+-#define IEEE80211_HT_CAP_SGI_20 0x0020
+-#define IEEE80211_HT_CAP_SGI_40 0x0040
+-#define IEEE80211_HT_CAP_DELAY_BA 0x0400
+-#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
+-#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
+-/* 802.11n HT capability AMPDU settings */
+-#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03
+-#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C
+-/* 802.11n HT capability MSC set */
+-#define IEEE80211_SUPP_MCS_SET_UEQM 4
+-#define IEEE80211_HT_CAP_MAX_STREAMS 4
+-#define IEEE80211_SUPP_MCS_SET_LEN 10
+-/* maximum streams the spec allows */
+-#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01
+-#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02
+-#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C
+-#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10
+-/* 802.11n HT IE masks */
+-#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03
+-#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00
+-#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01
+-#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03
+-#define IEEE80211_HT_IE_CHA_WIDTH 0x04
+-#define IEEE80211_HT_IE_HT_PROTECTION 0x0003
+-#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004
+-#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010
++/* for ht_param */
++#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03
++#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00
++#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01
++#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03
++#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04
++#define IEEE80211_HT_PARAM_RIFS_MODE 0x08
++#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10
++#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0
++
++/* for operation_mode */
++#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003
++#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0
++#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1
++#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2
++#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3
++#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004
++#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010
++
++/* for stbc_param */
++#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040
++#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080
++#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100
++#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200
++#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400
++#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800
++
+
+ /* block-ack parameters */
+ #define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
+@@ -949,7 +1006,7 @@ enum ieee80211_eid {
+ WLAN_EID_EXT_SUPP_RATES = 50,
+ /* 802.11n */
+ WLAN_EID_HT_CAPABILITY = 45,
+- WLAN_EID_HT_EXTRA_INFO = 61,
++ WLAN_EID_HT_INFORMATION = 61,
+ /* 802.11i */
+ WLAN_EID_RSN = 48,
+ WLAN_EID_WPA = 221,
+--- everything.orig/include/net/wireless.h 2008-10-08 20:44:46.000000000 +0200
++++ everything/include/net/wireless.h 2008-10-09 02:16:20.000000000 +0200
+@@ -10,6 +10,7 @@
+ #include <linux/netdevice.h>
+ #include <linux/debugfs.h>
+ #include <linux/list.h>
++#include <linux/ieee80211.h>
+ #include <net/cfg80211.h>
+
+ /**
+@@ -133,23 +134,23 @@ struct ieee80211_rate {
+ };
+
+ /**
+- * struct ieee80211_ht_info - describing STA's HT capabilities
++ * struct ieee80211_sta_ht_cap - STA's HT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11n HT capabilities for an STA.
+ *
+- * @ht_supported: is HT supported by STA, 0: no, 1: yes
++ * @ht_supported: is HT supported by the STA
+ * @cap: HT capabilities map as described in 802.11n spec
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
+- * @supp_mcs_set: Supported MCS set as described in 802.11n spec
++ * @mcs: Supported MCS rates
+ */
+-struct ieee80211_ht_info {
++struct ieee80211_sta_ht_cap {
+ u16 cap; /* use IEEE80211_HT_CAP_ */
+- u8 ht_supported;
++ bool ht_supported;
+ u8 ampdu_factor;
+ u8 ampdu_density;
+- u8 supp_mcs_set[16];
++ struct ieee80211_mcs_info mcs;
+ };
+
+ /**
+@@ -173,7 +174,7 @@ struct ieee80211_supported_band {
+ enum ieee80211_band band;
+ int n_channels;
+ int n_bitrates;
+- struct ieee80211_ht_info ht_info;
++ struct ieee80211_sta_ht_cap ht_cap;
+ };
+
+ /**
+--- everything.orig/net/mac80211/main.c 2008-10-08 20:45:06.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-09 02:16:29.000000000 +0200
+@@ -232,100 +232,6 @@ int ieee80211_hw_config(struct ieee80211
+ return ret;
+ }
+
+-/**
+- * ieee80211_handle_ht should be used only after legacy configuration
+- * has been determined namely band, as ht configuration depends upon
+- * the hardware's HT abilities for a _specific_ band.
+- */
+-u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht,
+- struct ieee80211_ht_info *req_ht_cap,
+- struct ieee80211_ht_bss_info *req_bss_cap)
+-{
+- struct ieee80211_conf *conf = &local->hw.conf;
+- struct ieee80211_supported_band *sband;
+- struct ieee80211_ht_info ht_conf;
+- struct ieee80211_ht_bss_info ht_bss_conf;
+- u32 changed = 0;
+- int i;
+- u8 max_tx_streams = IEEE80211_HT_CAP_MAX_STREAMS;
+- u8 tx_mcs_set_cap;
+-
+- sband = local->hw.wiphy->bands[conf->channel->band];
+-
+- memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info));
+- memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info));
+-
+- /* HT is not supported */
+- if (!sband->ht_info.ht_supported) {
+- conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
+- goto out;
+- }
+-
+- /* disable HT */
+- if (!enable_ht) {
+- if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)
+- changed |= BSS_CHANGED_HT;
+- conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
+- conf->ht_conf.ht_supported = 0;
+- goto out;
+- }
+-
+-
+- if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE))
+- changed |= BSS_CHANGED_HT;
+-
+- conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
+- ht_conf.ht_supported = 1;
+-
+- ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap;
+- ht_conf.cap &= ~(IEEE80211_HT_CAP_SM_PS);
+- ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_SM_PS;
+- ht_bss_conf.primary_channel = req_bss_cap->primary_channel;
+- ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
+- ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
+-
+- ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
+- ht_conf.ampdu_density = req_ht_cap->ampdu_density;
+-
+- /* Bits 96-100 */
+- tx_mcs_set_cap = sband->ht_info.supp_mcs_set[12];
+-
+- /* configure suppoerted Tx MCS according to requested MCS
+- * (based in most cases on Rx capabilities of peer) and self
+- * Tx MCS capabilities (as defined by low level driver HW
+- * Tx capabilities) */
+- if (!(tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_DEFINED))
+- goto check_changed;
+-
+- /* Counting from 0 therfore + 1 */
+- if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_RX_DIFF)
+- max_tx_streams = ((tx_mcs_set_cap &
+- IEEE80211_HT_CAP_MCS_TX_STREAMS) >> 2) + 1;
+-
+- for (i = 0; i < max_tx_streams; i++)
+- ht_conf.supp_mcs_set[i] =
+- sband->ht_info.supp_mcs_set[i] &
+- req_ht_cap->supp_mcs_set[i];
+-
+- if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_UEQM)
+- for (i = IEEE80211_SUPP_MCS_SET_UEQM;
+- i < IEEE80211_SUPP_MCS_SET_LEN; i++)
+- ht_conf.supp_mcs_set[i] =
+- sband->ht_info.supp_mcs_set[i] &
+- req_ht_cap->supp_mcs_set[i];
+-
+-check_changed:
+- /* if bss configuration changed store the new one */
+- if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) ||
+- memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) {
+- changed |= BSS_CHANGED_HT;
+- memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf));
+- memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf));
+- }
+-out:
+- return changed;
+-}
+-
+ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
+ u32 changed)
+ {
+--- everything.orig/include/net/mac80211.h 2008-10-08 20:45:06.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-09 02:16:30.000000000 +0200
+@@ -191,7 +191,7 @@ enum ieee80211_bss_change {
+ * @beacon_int: beacon interval
+ * @assoc_capability: capabilities taken from assoc resp
+ * @assoc_ht: association in HT mode
+- * @ht_conf: ht capabilities
++ * @ht_cap: ht capabilities
+ * @ht_bss_conf: ht extended capabilities
+ * @basic_rates: bitmap of basic rates, each bit stands for an
+ * index into the rate table configured by the driver in
+@@ -212,7 +212,7 @@ struct ieee80211_bss_conf {
+ u64 basic_rates;
+ /* ht related data */
+ bool assoc_ht;
+- struct ieee80211_ht_info *ht_conf;
++ struct ieee80211_sta_ht_cap *ht_cap;
+ struct ieee80211_ht_bss_info *ht_bss_conf;
+ };
+
+@@ -477,7 +477,7 @@ static inline int __deprecated __IEEE802
+ * @antenna_sel_tx: transmit antenna selection, 0: default/diversity,
+ * 1/2: antenna 0/1
+ * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx
+- * @ht_conf: describes current self configuration of 802.11n HT capabilies
++ * @ht_cap: describes current self configuration of 802.11n HT capabilities
+ * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters
+ * @channel: the channel to tune to
+ */
+@@ -493,7 +493,7 @@ struct ieee80211_conf {
+
+ struct ieee80211_channel *channel;
+
+- struct ieee80211_ht_info ht_conf;
++ struct ieee80211_sta_ht_cap ht_cap;
+ struct ieee80211_ht_bss_info ht_bss_conf;
+ };
+
+@@ -686,7 +686,7 @@ enum set_key_cmd {
+ * @addr: MAC address
+ * @aid: AID we assigned to the station if we're an AP
+ * @supp_rates: Bitmap of supported rates (per band)
+- * @ht_info: HT capabilities of this STA
++ * @ht_cap: HT capabilities of this STA
+ * @drv_priv: data area for driver use, will always be aligned to
+ * sizeof(void *), size is determined in hw information.
+ */
+@@ -694,7 +694,7 @@ struct ieee80211_sta {
+ u64 supp_rates[IEEE80211_NUM_BANDS];
+ u8 addr[ETH_ALEN];
+ u16 aid;
+- struct ieee80211_ht_info ht_info;
++ struct ieee80211_sta_ht_cap ht_cap;
+
+ /* must be last */
+ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+--- everything.orig/net/mac80211/ieee80211_i.h 2008-10-08 20:45:06.000000000 +0200
++++ everything/net/mac80211/ieee80211_i.h 2008-10-09 02:16:30.000000000 +0200
+@@ -817,7 +817,7 @@ struct ieee802_11_elems {
+ u8 *wmm_info;
+ u8 *wmm_param;
+ struct ieee80211_ht_cap *ht_cap_elem;
+- struct ieee80211_ht_addt_info *ht_info_elem;
++ struct ieee80211_ht_info *ht_info_elem;
+ u8 *mesh_config;
+ u8 *mesh_id;
+ u8 *peer_link;
+@@ -885,9 +885,6 @@ static inline int ieee80211_bssid_match(
+ int ieee80211_hw_config(struct ieee80211_local *local);
+ int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed);
+ void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
+-u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht,
+- struct ieee80211_ht_info *req_ht_cap,
+- struct ieee80211_ht_bss_info *req_bss_cap);
+ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
+ u32 changed);
+ void ieee80211_configure_filter(struct ieee80211_local *local);
+@@ -968,11 +965,14 @@ int ieee80211_monitor_start_xmit(struct
+ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
+
+ /* HT */
+-int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
+- struct ieee80211_ht_info *ht_info);
+-int ieee80211_ht_addt_info_ie_to_ht_bss_info(
+- struct ieee80211_ht_addt_info *ht_add_info_ie,
++void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_ht_cap *ht_cap_ie,
++ struct ieee80211_sta_ht_cap *ht_cap);
++void ieee80211_ht_info_ie_to_ht_bss_info(
++ struct ieee80211_ht_info *ht_add_info_ie,
+ struct ieee80211_ht_bss_info *bss_info);
++u32 ieee80211_handle_ht(struct ieee80211_local *local,
++ struct ieee80211_sta_ht_cap *req_ht_cap,
++ struct ieee80211_ht_bss_info *req_bss_cap);
+ void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
+
+ void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da,
+--- everything.orig/net/mac80211/wext.c 2008-10-08 20:45:06.000000000 +0200
++++ everything/net/mac80211/wext.c 2008-10-09 02:16:28.000000000 +0200
+@@ -147,7 +147,7 @@ static int ieee80211_ioctl_giwname(struc
+ sband = local->hw.wiphy->bands[IEEE80211_BAND_5GHZ];
+ if (sband) {
+ is_a = 1;
+- is_ht |= sband->ht_info.ht_supported;
++ is_ht |= sband->ht_cap.ht_supported;
+ }
+
+ sband = local->hw.wiphy->bands[IEEE80211_BAND_2GHZ];
+@@ -160,7 +160,7 @@ static int ieee80211_ioctl_giwname(struc
+ if (sband->bitrates[i].bitrate == 60)
+ is_g = 1;
+ }
+- is_ht |= sband->ht_info.ht_supported;
++ is_ht |= sband->ht_cap.ht_supported;
+ }
+
+ strcpy(name, "IEEE 802.11");
+--- everything.orig/net/mac80211/ht.c 2008-10-08 20:44:47.000000000 +0200
++++ everything/net/mac80211/ht.c 2008-10-09 02:16:26.000000000 +0200
+@@ -20,37 +20,33 @@
+ #include "sta_info.h"
+ #include "wme.h"
+
+-int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
+- struct ieee80211_ht_info *ht_info)
++void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_ht_cap *ht_cap_ie,
++ struct ieee80211_sta_ht_cap *ht_cap)
+ {
+
+- if (ht_info == NULL)
+- return -EINVAL;
++ BUG_ON(!ht_cap);
+
+- memset(ht_info, 0, sizeof(*ht_info));
++ memset(ht_cap, 0, sizeof(*ht_cap));
+
+ if (ht_cap_ie) {
+ u8 ampdu_info = ht_cap_ie->ampdu_params_info;
+
+- ht_info->ht_supported = 1;
+- ht_info->cap = le16_to_cpu(ht_cap_ie->cap_info);
+- ht_info->ampdu_factor =
+- ampdu_info & IEEE80211_HT_CAP_AMPDU_FACTOR;
+- ht_info->ampdu_density =
+- (ampdu_info & IEEE80211_HT_CAP_AMPDU_DENSITY) >> 2;
+- memcpy(ht_info->supp_mcs_set, ht_cap_ie->supp_mcs_set, 16);
++ ht_cap->ht_supported = true;
++ ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info);
++ ht_cap->ampdu_factor =
++ ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
++ ht_cap->ampdu_density =
++ (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
++ memcpy(&ht_cap->mcs, &ht_cap_ie->mcs, sizeof(ht_cap->mcs));
+ } else
+- ht_info->ht_supported = 0;
+-
+- return 0;
++ ht_cap->ht_supported = false;
+ }
+
+-int ieee80211_ht_addt_info_ie_to_ht_bss_info(
+- struct ieee80211_ht_addt_info *ht_add_info_ie,
++void ieee80211_ht_info_ie_to_ht_bss_info(
++ struct ieee80211_ht_info *ht_add_info_ie,
+ struct ieee80211_ht_bss_info *bss_info)
+ {
+- if (bss_info == NULL)
+- return -EINVAL;
++ BUG_ON(!bss_info);
+
+ memset(bss_info, 0, sizeof(*bss_info));
+
+@@ -62,8 +58,119 @@ int ieee80211_ht_addt_info_ie_to_ht_bss_
+ bss_info->bss_cap = ht_add_info_ie->ht_param;
+ bss_info->bss_op_mode = (u8)(op_mode & 0xff);
+ }
++}
++
++/*
++ * ieee80211_handle_ht should be called only after the operating band
++ * has been determined as ht configuration depends on the hw's
++ * HT abilities for a specific band.
++ */
++u32 ieee80211_handle_ht(struct ieee80211_local *local,
++ struct ieee80211_sta_ht_cap *req_ht_cap,
++ struct ieee80211_ht_bss_info *req_bss_cap)
++{
++ struct ieee80211_conf *conf = &local->hw.conf;
++ struct ieee80211_supported_band *sband;
++ struct ieee80211_sta_ht_cap ht_cap;
++ struct ieee80211_ht_bss_info ht_bss_conf;
++ u32 changed = 0;
++ int i;
++ u8 max_tx_streams;
++ u8 tx_mcs_set_cap;
++ bool enable_ht = true;
++
++ sband = local->hw.wiphy->bands[conf->channel->band];
++
++ memset(&ht_cap, 0, sizeof(ht_cap));
++ memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info));
++
++ /* HT is not supported */
++ if (!sband->ht_cap.ht_supported)
++ enable_ht = false;
++
++ /* disable HT */
++ if (!enable_ht) {
++ if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)
++ changed |= BSS_CHANGED_HT;
++ conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
++ conf->ht_cap.ht_supported = false;
++ return changed;
++ }
++
++
++ if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE))
++ changed |= BSS_CHANGED_HT;
++
++ conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
++ ht_cap.ht_supported = true;
++
++ ht_cap.cap = req_ht_cap->cap & sband->ht_cap.cap;
++ ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS;
++ ht_cap.cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS;
++
++ ht_bss_conf.primary_channel = req_bss_cap->primary_channel;
++ ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
++ ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
++
++ ht_cap.ampdu_factor = req_ht_cap->ampdu_factor;
++ ht_cap.ampdu_density = req_ht_cap->ampdu_density;
++
++ /* own MCS TX capabilities */
++ tx_mcs_set_cap = sband->ht_cap.mcs.tx_params;
++
++ /*
++ * configure supported Tx MCS according to requested MCS
++ * (based in most cases on Rx capabilities of peer) and self
++ * Tx MCS capabilities (as defined by low level driver HW
++ * Tx capabilities)
++ */
++
++ /* can we TX with MCS rates? */
++ if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
++ goto check_changed;
++
++ /* Counting from 0, therefore +1 */
++ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
++ max_tx_streams =
++ ((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
++ >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
++ else
++ max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS;
++
++ /*
++ * 802.11n D5.0 20.3.5 / 20.6 says:
++ * - indices 0 to 7 and 32 are single spatial stream
++ * - 8 to 31 are multiple spatial streams using equal modulation
++ * [8..15 for two streams, 16..23 for three and 24..31 for four]
++ * - remainder are multiple spatial streams using unequal modulation
++ */
++ for (i = 0; i < max_tx_streams; i++)
++ ht_cap.mcs.rx_mask[i] =
++ sband->ht_cap.mcs.rx_mask[i] &
++ req_ht_cap->mcs.rx_mask[i];
++
++ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
++ for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
++ i < IEEE80211_HT_MCS_MASK_LEN; i++)
++ ht_cap.mcs.rx_mask[i] =
++ sband->ht_cap.mcs.rx_mask[i] &
++ req_ht_cap->mcs.rx_mask[i];
++
++ /* handle MCS rate 32 too */
++ if (sband->ht_cap.mcs.rx_mask[32/8] &
++ req_ht_cap->mcs.rx_mask[32/8] & 1)
++ ht_cap.mcs.rx_mask[32/8] |= 1;
++
++ check_changed:
++ /* if bss configuration changed store the new one */
++ if (memcmp(&conf->ht_cap, &ht_cap, sizeof(ht_cap)) ||
++ memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) {
++ changed |= BSS_CHANGED_HT;
++ memcpy(&conf->ht_cap, &ht_cap, sizeof(ht_cap));
++ memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf));
++ }
+
+- return 0;
++ return changed;
+ }
+
+ static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
+@@ -802,7 +909,7 @@ void ieee80211_process_addba_request(str
+ * check if configuration can support the BA policy
+ * and if buffer size does not exceeds max value */
+ if (((ba_policy != 1)
+- && (!(conf->ht_conf.cap & IEEE80211_HT_CAP_DELAY_BA)))
++ && (!(conf->ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA)))
+ || (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
+ status = WLAN_STATUS_INVALID_QOS_PARAM;
+ #ifdef CONFIG_MAC80211_HT_DEBUG
+@@ -820,7 +927,7 @@ void ieee80211_process_addba_request(str
+
+ sband = local->hw.wiphy->bands[conf->channel->band];
+ buf_size = IEEE80211_MIN_AMPDU_BUF;
+- buf_size = buf_size << sband->ht_info.ampdu_factor;
++ buf_size = buf_size << sband->ht_cap.ampdu_factor;
+ }
+
+
+--- everything.orig/net/mac80211/mlme.c 2008-10-08 20:45:06.000000000 +0200
++++ everything/net/mac80211/mlme.c 2008-10-09 02:16:26.000000000 +0200
+@@ -236,7 +236,7 @@ static void ieee80211_send_assoc(struct
+ struct ieee80211_local *local = sdata->local;
+ struct sk_buff *skb;
+ struct ieee80211_mgmt *mgmt;
+- u8 *pos, *ies, *ht_add_ie;
++ u8 *pos, *ies, *ht_ie;
+ int i, len, count, rates_len, supp_rates_len;
+ u16 capab;
+ struct ieee80211_bss *bss;
+@@ -393,24 +393,25 @@ static void ieee80211_send_assoc(struct
+
+ /* wmm support is a must to HT */
+ if (wmm && (ifsta->flags & IEEE80211_STA_WMM_ENABLED) &&
+- sband->ht_info.ht_supported &&
+- (ht_add_ie = ieee80211_bss_get_ie(bss, WLAN_EID_HT_EXTRA_INFO))) {
+- struct ieee80211_ht_addt_info *ht_add_info =
+- (struct ieee80211_ht_addt_info *)ht_add_ie;
+- u16 cap = sband->ht_info.cap;
++ sband->ht_cap.ht_supported &&
++ (ht_ie = ieee80211_bss_get_ie(bss, WLAN_EID_HT_INFORMATION)) &&
++ ht_ie[1] >= sizeof(struct ieee80211_ht_info)) {
++ struct ieee80211_ht_info *ht_info =
++ (struct ieee80211_ht_info *)(ht_ie + 2);
++ u16 cap = sband->ht_cap.cap;
+ __le16 tmp;
+ u32 flags = local->hw.conf.channel->flags;
+
+- switch (ht_add_info->ht_param & IEEE80211_HT_IE_CHA_SEC_OFFSET) {
+- case IEEE80211_HT_IE_CHA_SEC_ABOVE:
++ switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
++ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ if (flags & IEEE80211_CHAN_NO_FAT_ABOVE) {
+- cap &= ~IEEE80211_HT_CAP_SUP_WIDTH;
++ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+ break;
+- case IEEE80211_HT_IE_CHA_SEC_BELOW:
++ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ if (flags & IEEE80211_CHAN_NO_FAT_BELOW) {
+- cap &= ~IEEE80211_HT_CAP_SUP_WIDTH;
++ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_SGI_40;
+ }
+ break;
+@@ -424,9 +425,9 @@ static void ieee80211_send_assoc(struct
+ memcpy(pos, &tmp, sizeof(u16));
+ pos += sizeof(u16);
+ /* TODO: needs a define here for << 2 */
+- *pos++ = sband->ht_info.ampdu_factor |
+- (sband->ht_info.ampdu_density << 2);
+- memcpy(pos, sband->ht_info.supp_mcs_set, 16);
++ *pos++ = sband->ht_cap.ampdu_factor |
++ (sband->ht_cap.ampdu_density << 2);
++ memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+ }
+
+ kfree(ifsta->assocreq_ies);
+@@ -732,7 +733,7 @@ static void ieee80211_set_associated(str
+ if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+ changed |= BSS_CHANGED_HT;
+ sdata->bss_conf.assoc_ht = 1;
+- sdata->bss_conf.ht_conf = &conf->ht_conf;
++ sdata->bss_conf.ht_cap = &conf->ht_cap;
+ sdata->bss_conf.ht_bss_conf = &conf->ht_bss_conf;
+ }
+
+@@ -856,7 +857,7 @@ static void ieee80211_set_disassoc(struc
+ changed |= BSS_CHANGED_HT;
+
+ sdata->bss_conf.assoc_ht = 0;
+- sdata->bss_conf.ht_conf = NULL;
++ sdata->bss_conf.ht_cap = NULL;
+ sdata->bss_conf.ht_bss_conf = NULL;
+
+ ieee80211_led_assoc(local, 0);
+@@ -1348,11 +1349,11 @@ static void ieee80211_rx_mgmt_assoc_resp
+ if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
+ (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
+ struct ieee80211_ht_bss_info bss_info;
+- ieee80211_ht_cap_ie_to_ht_info(
+- elems.ht_cap_elem, &sta->sta.ht_info);
+- ieee80211_ht_addt_info_ie_to_ht_bss_info(
++ ieee80211_ht_cap_ie_to_sta_ht_cap(
++ elems.ht_cap_elem, &sta->sta.ht_cap);
++ ieee80211_ht_info_ie_to_ht_bss_info(
+ elems.ht_info_elem, &bss_info);
+- ieee80211_handle_ht(local, 1, &sta->sta.ht_info, &bss_info);
++ ieee80211_handle_ht(local, &sta->sta.ht_cap, &bss_info);
+ }
+
+ rate_control_rate_init(sta);
+@@ -1712,9 +1713,9 @@ static void ieee80211_rx_mgmt_beacon(str
+ elems.wmm_param && conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+ struct ieee80211_ht_bss_info bss_info;
+
+- ieee80211_ht_addt_info_ie_to_ht_bss_info(
++ ieee80211_ht_info_ie_to_ht_bss_info(
+ elems.ht_info_elem, &bss_info);
+- changed |= ieee80211_handle_ht(local, 1, &conf->ht_conf,
++ changed |= ieee80211_handle_ht(local, &conf->ht_cap,
+ &bss_info);
+ }
+
+--- everything.orig/net/mac80211/util.c 2008-10-08 20:45:06.000000000 +0200
++++ everything/net/mac80211/util.c 2008-10-09 02:16:28.000000000 +0200
+@@ -532,8 +532,8 @@ void ieee802_11_parse_elems(u8 *start, s
+ if (elen >= sizeof(struct ieee80211_ht_cap))
+ elems->ht_cap_elem = (void *)pos;
+ break;
+- case WLAN_EID_HT_EXTRA_INFO:
+- if (elen >= sizeof(struct ieee80211_ht_addt_info))
++ case WLAN_EID_HT_INFORMATION:
++ if (elen >= sizeof(struct ieee80211_ht_info))
+ elems->ht_info_elem = (void *)pos;
+ break;
+ case WLAN_EID_MESH_ID:
+--- everything.orig/net/mac80211/cfg.c 2008-10-08 20:45:06.000000000 +0200
++++ everything/net/mac80211/cfg.c 2008-10-09 02:16:29.000000000 +0200
+@@ -635,10 +635,9 @@ static void sta_apply_parameters(struct
+ sta->sta.supp_rates[local->oper_channel->band] = rates;
+ }
+
+- if (params->ht_capa) {
+- ieee80211_ht_cap_ie_to_ht_info(params->ht_capa,
+- &sta->sta.ht_info);
+- }
++ if (params->ht_capa)
++ ieee80211_ht_cap_ie_to_sta_ht_cap(params->ht_capa,
++ &sta->sta.ht_cap);
+
+ if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
+ switch (params->plink_action) {
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-agn-rs.c 2008-10-08 20:44:47.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-agn-rs.c 2008-10-09 02:16:27.000000000 +0200
+@@ -1136,10 +1136,10 @@ static int rs_switch_to_mimo2(struct iwl
+ s8 is_green = lq_sta->is_green;
+
+ if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
+- !sta->ht_info.ht_supported)
++ !sta->ht_cap.ht_supported)
+ return -1;
+
+- if (((sta->ht_info.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
++ if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
+ == WLAN_HT_CAP_SM_PS_STATIC)
+ return -1;
+
+@@ -1204,7 +1204,7 @@ static int rs_switch_to_siso(struct iwl_
+ s32 rate;
+
+ if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
+- !sta->ht_info.ht_supported)
++ !sta->ht_cap.ht_supported)
+ return -1;
+
+ IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
+@@ -2244,19 +2244,19 @@ static void rs_rate_init(void *priv_r, s
+ * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
+ * supp_rates[] does not; shift to convert format, force 9 MBits off.
+ */
+- lq_sta->active_siso_rate = conf->ht_conf.supp_mcs_set[0] << 1;
+- lq_sta->active_siso_rate |= conf->ht_conf.supp_mcs_set[0] & 0x1;
++ lq_sta->active_siso_rate = conf->ht_cap.mcs.rx_mask[0] << 1;
++ lq_sta->active_siso_rate |= conf->ht_cap.mcs.rx_mask[0] & 0x1;
+ lq_sta->active_siso_rate &= ~((u16)0x2);
+ lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
+
+ /* Same here */
+- lq_sta->active_mimo2_rate = conf->ht_conf.supp_mcs_set[1] << 1;
+- lq_sta->active_mimo2_rate |= conf->ht_conf.supp_mcs_set[1] & 0x1;
++ lq_sta->active_mimo2_rate = conf->ht_cap.mcs.rx_mask[1] << 1;
++ lq_sta->active_mimo2_rate |= conf->ht_cap.mcs.rx_mask[1] & 0x1;
+ lq_sta->active_mimo2_rate &= ~((u16)0x2);
+ lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
+
+- lq_sta->active_mimo3_rate = conf->ht_conf.supp_mcs_set[2] << 1;
+- lq_sta->active_mimo3_rate |= conf->ht_conf.supp_mcs_set[2] & 0x1;
++ lq_sta->active_mimo3_rate = conf->ht_cap.mcs.rx_mask[2] << 1;
++ lq_sta->active_mimo3_rate |= conf->ht_cap.mcs.rx_mask[2] & 0x1;
+ lq_sta->active_mimo3_rate &= ~((u16)0x2);
+ lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
+
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-agn.c 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-agn.c 2008-10-09 02:16:29.000000000 +0200
+@@ -553,7 +553,7 @@ static int iwl4965_send_beacon_cmd(struc
+ static void iwl4965_ht_conf(struct iwl_priv *priv,
+ struct ieee80211_bss_conf *bss_conf)
+ {
+- struct ieee80211_ht_info *ht_conf = bss_conf->ht_conf;
++ struct ieee80211_sta_ht_cap *ht_conf = bss_conf->ht_cap;
+ struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf;
+ struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+
+@@ -574,27 +574,27 @@ static void iwl4965_ht_conf(struct iwl_p
+ !!(ht_conf->cap & IEEE80211_HT_CAP_MAX_AMSDU);
+
+ iwl_conf->supported_chan_width =
+- !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH);
++ !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
+ iwl_conf->extension_chan_offset =
+- ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_SEC_OFFSET;
++ ht_bss_conf->bss_cap & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+ /* If no above or below channel supplied disable FAT channel */
+- if (iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_ABOVE &&
+- iwl_conf->extension_chan_offset != IEEE80211_HT_IE_CHA_SEC_BELOW) {
+- iwl_conf->extension_chan_offset = IEEE80211_HT_IE_CHA_SEC_NONE;
++ if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
++ iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) {
++ iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ iwl_conf->supported_chan_width = 0;
+ }
+
+ iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
+
+- memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
++ memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
+
+ iwl_conf->control_channel = ht_bss_conf->primary_channel;
+ iwl_conf->tx_chan_width =
+- !!(ht_bss_conf->bss_cap & IEEE80211_HT_IE_CHA_WIDTH);
++ !!(ht_bss_conf->bss_cap & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY);
+ iwl_conf->ht_protection =
+- ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_HT_PROTECTION;
++ ht_bss_conf->bss_op_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+ iwl_conf->non_GF_STA_present =
+- !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_IE_NON_GF_STA_PRSNT);
++ !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+ IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel);
+ IWL_DEBUG_MAC80211("leave\n");
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-core.c 2008-10-08 20:44:47.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-core.c 2008-10-09 02:16:26.000000000 +0200
+@@ -382,10 +382,10 @@ void iwl_reset_qos(struct iwl_priv *priv
+ }
+ EXPORT_SYMBOL(iwl_reset_qos);
+
+-#define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */
+-#define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */
++#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
++#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
+ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
+- struct ieee80211_ht_info *ht_info,
++ struct ieee80211_sta_ht_cap *ht_info,
+ enum ieee80211_band band)
+ {
+ u16 max_bit_rate = 0;
+@@ -393,45 +393,46 @@ static void iwlcore_init_ht_hw_capab(con
+ u8 tx_chains_num = priv->hw_params.tx_chains_num;
+
+ ht_info->cap = 0;
+- memset(ht_info->supp_mcs_set, 0, 16);
++ memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+
+- ht_info->ht_supported = 1;
++ ht_info->ht_supported = true;
+
+- ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
+- ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
+- ht_info->cap |= (u16)(IEEE80211_HT_CAP_SM_PS &
++ ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
++ ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
++ ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
+ (WLAN_HT_CAP_SM_PS_DISABLED << 2));
+
+ max_bit_rate = MAX_BIT_RATE_20_MHZ;
+ if (priv->hw_params.fat_channel & BIT(band)) {
+- ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
+- ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
+- ht_info->supp_mcs_set[4] = 0x01;
++ ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
++ ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
++ ht_info->mcs.rx_mask[4] = 0x01;
+ max_bit_rate = MAX_BIT_RATE_40_MHZ;
+ }
+
+ if (priv->cfg->mod_params->amsdu_size_8K)
+- ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
++ ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+ ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
+ ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
+
+- ht_info->supp_mcs_set[0] = 0xFF;
++ ht_info->mcs.rx_mask[0] = 0xFF;
+ if (rx_chains_num >= 2)
+- ht_info->supp_mcs_set[1] = 0xFF;
++ ht_info->mcs.rx_mask[1] = 0xFF;
+ if (rx_chains_num >= 3)
+- ht_info->supp_mcs_set[2] = 0xFF;
++ ht_info->mcs.rx_mask[2] = 0xFF;
+
+ /* Highest supported Rx data rate */
+ max_bit_rate *= rx_chains_num;
+- ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF);
+- ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8);
++ WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
++ ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
+
+ /* Tx MCS capabilities */
+- ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
++ ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ if (tx_chains_num != rx_chains_num) {
+- ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF;
+- ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2);
++ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
++ ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
++ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+ }
+ }
+
+@@ -495,7 +496,7 @@ static int iwlcore_init_geos(struct iwl_
+ sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
+
+ if (priv->cfg->sku & IWL_SKU_N)
+- iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
++ iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
+ IEEE80211_BAND_5GHZ);
+
+ sband = &priv->bands[IEEE80211_BAND_2GHZ];
+@@ -505,7 +506,7 @@ static int iwlcore_init_geos(struct iwl_
+ sband->n_bitrates = IWL_RATE_COUNT;
+
+ if (priv->cfg->sku & IWL_SKU_N)
+- iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
++ iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
+ IEEE80211_BAND_2GHZ);
+
+ priv->ieee_channels = channels;
+@@ -595,8 +596,8 @@ static void iwlcore_free_geos(struct iwl
+ static bool is_single_rx_stream(struct iwl_priv *priv)
+ {
+ return !priv->current_ht_config.is_ht ||
+- ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
+- (priv->current_ht_config.supp_mcs_set[2] == 0));
++ ((priv->current_ht_config.mcs.rx_mask[1] == 0) &&
++ (priv->current_ht_config.mcs.rx_mask[2] == 0));
+ }
+
+ static u8 iwl_is_channel_extension(struct iwl_priv *priv,
+@@ -609,10 +610,10 @@ static u8 iwl_is_channel_extension(struc
+ if (!is_channel_valid(ch_info))
+ return 0;
+
+- if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE)
++ if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
+ return !(ch_info->fat_extension_channel &
+ IEEE80211_CHAN_NO_FAT_ABOVE);
+- else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW)
++ else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
+ return !(ch_info->fat_extension_channel &
+ IEEE80211_CHAN_NO_FAT_BELOW);
+
+@@ -620,18 +621,18 @@ static u8 iwl_is_channel_extension(struc
+ }
+
+ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
+- struct ieee80211_ht_info *sta_ht_inf)
++ struct ieee80211_sta_ht_cap *sta_ht_inf)
+ {
+ struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
+
+ if ((!iwl_ht_conf->is_ht) ||
+ (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
+- (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE))
++ (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
+ return 0;
+
+ if (sta_ht_inf) {
+ if ((!sta_ht_inf->ht_supported) ||
+- (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
++ (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
+ return 0;
+ }
+
+@@ -671,13 +672,13 @@ void iwl_set_rxon_ht(struct iwl_priv *pr
+
+ /* Note: control channel is opposite of extension channel */
+ switch (ht_info->extension_chan_offset) {
+- case IEEE80211_HT_IE_CHA_SEC_ABOVE:
++ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+ break;
+- case IEEE80211_HT_IE_CHA_SEC_BELOW:
++ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+ break;
+- case IEEE80211_HT_IE_CHA_SEC_NONE:
++ case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+ default:
+ rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
+ break;
+@@ -693,9 +694,9 @@ void iwl_set_rxon_ht(struct iwl_priv *pr
+ "rxon flags 0x%X operation mode :0x%X "
+ "extension channel offset 0x%x "
+ "control chan %d\n",
+- ht_info->supp_mcs_set[0],
+- ht_info->supp_mcs_set[1],
+- ht_info->supp_mcs_set[2],
++ ht_info->mcs.rx_mask[0],
++ ht_info->mcs.rx_mask[1],
++ ht_info->mcs.rx_mask[2],
+ le32_to_cpu(rxon->flags), ht_info->ht_protection,
+ ht_info->extension_chan_offset,
+ ht_info->control_channel);
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-core.h 2008-10-08 20:44:47.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-core.h 2008-10-08 20:45:06.000000000 +0200
+@@ -190,7 +190,7 @@ void iwl_set_rxon_chain(struct iwl_priv
+ int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
+ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info);
+ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
+- struct ieee80211_ht_info *sta_ht_inf);
++ struct ieee80211_sta_ht_cap *sta_ht_inf);
+ int iwl_hw_nic_init(struct iwl_priv *priv);
+ int iwl_setup_mac(struct iwl_priv *priv);
+ int iwl_set_hw_params(struct iwl_priv *priv);
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-dev.h 2008-10-08 20:44:47.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-dev.h 2008-10-09 02:16:27.000000000 +0200
+@@ -412,7 +412,7 @@ struct iwl_ht_info {
+ u8 max_amsdu_size;
+ u8 ampdu_factor;
+ u8 mpdu_density;
+- u8 supp_mcs_set[16];
++ struct ieee80211_mcs_info mcs;
+ /* BSS related data */
+ u8 control_channel;
+ u8 extension_chan_offset;
+@@ -584,7 +584,7 @@ struct iwl_addsta_cmd;
+ extern int iwl_send_add_sta(struct iwl_priv *priv,
+ struct iwl_addsta_cmd *sta, u8 flags);
+ extern u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr,
+- int is_ap, u8 flags, struct ieee80211_ht_info *ht_info);
++ int is_ap, u8 flags, struct ieee80211_sta_ht_cap *ht_info);
+ extern void iwl4965_update_chain_flags(struct iwl_priv *priv);
+ extern int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
+ extern const u8 iwl_bcast_addr[ETH_ALEN];
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-sta.c 2008-10-08 20:44:47.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-sta.c 2008-10-09 02:16:29.000000000 +0200
+@@ -183,7 +183,7 @@ int iwl_send_add_sta(struct iwl_priv *pr
+ EXPORT_SYMBOL(iwl_send_add_sta);
+
+ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
+- struct ieee80211_ht_info *sta_ht_inf)
++ struct ieee80211_sta_ht_cap *sta_ht_inf)
+ {
+ __le32 sta_flags;
+ u8 mimo_ps_mode;
+@@ -231,7 +231,7 @@ static void iwl_set_ht_add_station(struc
+ * iwl_add_station_flags - Add station to tables in driver and device
+ */
+ u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap,
+- u8 flags, struct ieee80211_ht_info *ht_info)
++ u8 flags, struct ieee80211_sta_ht_cap *ht_info)
+ {
+ int i;
+ int sta_id = IWL_INVALID_STATION;
+@@ -900,7 +900,7 @@ int iwl_rxon_add_station(struct iwl_priv
+
+ /* Add station to device's station table */
+ struct ieee80211_conf *conf = &priv->hw->conf;
+- struct ieee80211_ht_info *cur_ht_config = &conf->ht_conf;
++ struct ieee80211_sta_ht_cap *cur_ht_config = &conf->ht_cap;
+
+ if ((is_ap) &&
+ (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
+--- everything.orig/drivers/net/wireless/iwlwifi/iwl-scan.c 2008-10-08 20:44:47.000000000 +0200
++++ everything/drivers/net/wireless/iwlwifi/iwl-scan.c 2008-10-08 20:45:06.000000000 +0200
+@@ -550,7 +550,7 @@ static void iwl_ht_cap_to_ie(const struc
+ {
+ struct ieee80211_ht_cap *ht_cap;
+
+- if (!sband || !sband->ht_info.ht_supported)
++ if (!sband || !sband->ht_cap.ht_supported)
+ return;
+
+ if (*left < sizeof(struct ieee80211_ht_cap))
+@@ -559,12 +559,12 @@ static void iwl_ht_cap_to_ie(const struc
+ *pos++ = sizeof(struct ieee80211_ht_cap);
+ ht_cap = (struct ieee80211_ht_cap *) pos;
+
+- ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
+- memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
++ ht_cap->cap_info = cpu_to_le16(sband->ht_cap.cap);
++ memcpy(&ht_cap->mcs, &sband->ht_cap.mcs, 16);
+ ht_cap->ampdu_params_info =
+- (sband->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
+- ((sband->ht_info.ampdu_density << 2) &
+- IEEE80211_HT_CAP_AMPDU_DENSITY);
++ (sband->ht_cap.ampdu_factor & IEEE80211_HT_AMPDU_PARM_FACTOR) |
++ ((sband->ht_cap.ampdu_density << 2) &
++ IEEE80211_HT_AMPDU_PARM_DENSITY);
+ *left -= sizeof(struct ieee80211_ht_cap);
+ }
+
+--- everything.orig/drivers/net/wireless/ath9k/main.c 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/ath9k/main.c 2008-10-09 02:16:30.000000000 +0200
+@@ -61,24 +61,24 @@ static u32 ath_get_extchanmode(struct at
+
+ switch (chan->band) {
+ case IEEE80211_BAND_2GHZ:
+- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
++ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) &&
+ (tx_chan_width == ATH9K_HT_MACMODE_20))
+ chanmode = CHANNEL_G_HT20;
+- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
++ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) &&
+ (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ chanmode = CHANNEL_G_HT40PLUS;
+- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
++ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) &&
+ (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ chanmode = CHANNEL_G_HT40MINUS;
+ break;
+ case IEEE80211_BAND_5GHZ:
+- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
++ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) &&
+ (tx_chan_width == ATH9K_HT_MACMODE_20))
+ chanmode = CHANNEL_A_HT20;
+- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
++ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) &&
+ (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ chanmode = CHANNEL_A_HT40PLUS;
+- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
++ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) &&
+ (tx_chan_width == ATH9K_HT_MACMODE_2040))
+ chanmode = CHANNEL_A_HT40MINUS;
+ break;
+@@ -215,24 +215,24 @@ static void ath_key_delete(struct ath_so
+ ath_key_reset(sc, key->keyidx, freeslot);
+ }
+
+-static void setup_ht_cap(struct ieee80211_ht_info *ht_info)
++static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
+ {
+ #define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
+ #define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
+
+- ht_info->ht_supported = 1;
+- ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH
+- |(u16)IEEE80211_HT_CAP_SM_PS
+- |(u16)IEEE80211_HT_CAP_SGI_40
+- |(u16)IEEE80211_HT_CAP_DSSSCCK40;
++ ht_info->ht_supported = true;
++ ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
++ IEEE80211_HT_CAP_SM_PS |
++ IEEE80211_HT_CAP_SGI_40 |
++ IEEE80211_HT_CAP_DSSSCCK40;
+
+ ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
+ ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
+- /* setup supported mcs set */
+- memset(ht_info->supp_mcs_set, 0, 16);
+- ht_info->supp_mcs_set[0] = 0xff;
+- ht_info->supp_mcs_set[1] = 0xff;
+- ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
++ /* set up supported mcs set */
++ memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
++ ht_info->mcs.rx_mask[0] = 0xff;
++ ht_info->mcs.rx_mask[1] = 0xff;
++ ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ }
+
+ static int ath_rate2idx(struct ath_softc *sc, int rate)
+@@ -328,31 +328,28 @@ static u8 parse_mpdudensity(u8 mpdudensi
+ static void ath9k_ht_conf(struct ath_softc *sc,
+ struct ieee80211_bss_conf *bss_conf)
+ {
+-#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14)
+ struct ath_ht_info *ht_info = &sc->sc_ht_info;
+
+ if (bss_conf->assoc_ht) {
+ ht_info->ext_chan_offset =
+ bss_conf->ht_bss_conf->bss_cap &
+- IEEE80211_HT_IE_CHA_SEC_OFFSET;
++ IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+
+- if (!(bss_conf->ht_conf->cap &
++ if (!(bss_conf->ht_cap->cap &
+ IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+ (bss_conf->ht_bss_conf->bss_cap &
+- IEEE80211_HT_IE_CHA_WIDTH))
++ IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
+ ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
+ else
+ ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
+
+ ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
+ ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+- bss_conf->ht_conf->ampdu_factor);
++ bss_conf->ht_cap->ampdu_factor);
+ ht_info->mpdudensity =
+- parse_mpdudensity(bss_conf->ht_conf->ampdu_density);
++ parse_mpdudensity(bss_conf->ht_cap->ampdu_density);
+
+ }
+-
+-#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT
+ }
+
+ static void ath9k_bss_assoc_info(struct ath_softc *sc,
+@@ -412,7 +409,7 @@ static void ath9k_bss_assoc_info(struct
+ return;
+ }
+
+- if (hw->conf.ht_conf.ht_supported)
++ if (hw->conf.ht_cap.ht_supported)
+ sc->sc_ah->ah_channels[pos].chanmode =
+ ath_get_extchanmode(sc, curchan);
+ else
+@@ -535,7 +532,7 @@ int _ath_rx_indicate(struct ath_softc *s
+
+ if (an) {
+ ath_rx_input(sc, an,
+- hw->conf.ht_conf.ht_supported,
++ hw->conf.ht_cap.ht_supported,
+ skb, status, &st);
+ }
+ if (!an || (st != ATH_RX_CONSUMED))
+@@ -944,7 +941,7 @@ static int ath_attach(u16 devid,
+
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+ /* Setup HT capabilities for 2.4Ghz*/
+- setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info);
++ setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &sc->sbands[IEEE80211_BAND_2GHZ];
+@@ -959,7 +956,7 @@ static int ath_attach(u16 devid,
+
+ if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
+ /* Setup HT capabilities for 5Ghz*/
+- setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info);
++ setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &sc->sbands[IEEE80211_BAND_5GHZ];
+@@ -1255,7 +1252,7 @@ static int ath9k_config(struct ieee80211
+ (curchan->band == IEEE80211_BAND_2GHZ) ?
+ CHANNEL_G : CHANNEL_A;
+
+- if (sc->sc_curaid && hw->conf.ht_conf.ht_supported)
++ if (sc->sc_curaid && hw->conf.ht_cap.ht_supported)
+ sc->sc_ah->ah_channels[pos].chanmode =
+ ath_get_extchanmode(sc, curchan);
+
+--- everything.orig/drivers/net/wireless/ath9k/rc.c 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/ath9k/rc.c 2008-10-09 02:16:27.000000000 +0200
+@@ -1838,7 +1838,7 @@ void ath_rc_node_update(struct ieee80211
+ struct ath_softc *sc = hw->priv;
+ u32 capflag = 0;
+
+- if (hw->conf.ht_conf.ht_supported) {
++ if (hw->conf.ht_cap.ht_supported) {
+ capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG;
+ if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040)
+ capflag |= ATH_RC_CW40_FLAG;
+@@ -1910,7 +1910,7 @@ static void ath_tx_aggr_resp(struct ath_
+ */
+ si = container_of(sta, struct sta_info, sta);
+ buffersize = IEEE80211_MIN_AMPDU_BUF <<
+- sband->ht_info.ampdu_factor; /* FIXME */
++ sband->ht_cap.ampdu_factor; /* FIXME */
+ state = si->ampdu_mlme.tid_state_tx[tidno];
+
+ if (state & HT_ADDBA_RECEIVED_MSK) {
+@@ -1980,7 +1980,7 @@ static void ath_get_rate(void *priv, str
+
+ /* Check if aggregation has to be enabled for this tid */
+
+- if (hw->conf.ht_conf.ht_supported) {
++ if (hw->conf.ht_cap.ht_supported) {
+ if (ieee80211_is_data_qos(fc)) {
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
+@@ -2028,8 +2028,8 @@ static void ath_rate_init(void *priv, st
+
+ ath_setup_rates(sc, sband, sta, ath_rc_priv);
+ if (sc->hw->conf.flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+- for (i = 0; i < MCS_SET_SIZE; i++) {
+- if (sc->hw->conf.ht_conf.supp_mcs_set[i/8] & (1<<(i%8)))
++ for (i = 0; i < 77; i++) {
++ if (sc->hw->conf.ht_cap.mcs.rx_mask[i/8] & (1<<(i%8)))
+ ath_rc_priv->neg_ht_rates.rs_rates[j++] = i;
+ if (j == ATH_RATE_MAX)
+ break;
+--- everything.orig/drivers/net/wireless/ath9k/recv.c 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/ath9k/recv.c 2008-10-09 02:16:27.000000000 +0200
+@@ -1119,7 +1119,7 @@ int ath_rx_aggr_start(struct ath_softc *
+
+ sband = hw->wiphy->bands[hw->conf.channel->band];
+ buffersize = IEEE80211_MIN_AMPDU_BUF <<
+- sband->ht_info.ampdu_factor; /* FIXME */
++ sband->ht_cap.ampdu_factor; /* FIXME */
+
+ rxtid = &an->an_aggr.rx.tid[tid];
+
+--- everything.orig/drivers/net/wireless/ath9k/xmit.c 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/ath9k/xmit.c 2008-10-09 02:16:27.000000000 +0200
+@@ -300,7 +300,7 @@ static int ath_tx_prepare(struct ath_sof
+ if (ieee80211_is_data(fc) && !txctl->use_minrate) {
+
+ /* Enable HT only for DATA frames and not for EAPOL */
+- txctl->ht = (hw->conf.ht_conf.ht_supported &&
++ txctl->ht = (hw->conf.ht_cap.ht_supported &&
+ (tx_info->flags & IEEE80211_TX_CTL_AMPDU));
+
+ if (is_multicast_ether_addr(hdr->addr1)) {
+--- everything.orig/drivers/net/wireless/ath9k/rc.h 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/ath9k/rc.h 2008-10-08 20:45:06.000000000 +0200
+@@ -59,7 +59,6 @@ struct ath_softc;
+ #define FALSE 0
+
+ #define ATH_RATE_MAX 30
+-#define MCS_SET_SIZE 128
+
+ enum ieee80211_fixed_rate_mode {
+ IEEE80211_FIXED_RATE_NONE = 0,
+--- everything.orig/drivers/net/wireless/mac80211_hwsim.c 2008-10-08 20:44:48.000000000 +0200
++++ everything/drivers/net/wireless/mac80211_hwsim.c 2008-10-09 02:16:30.000000000 +0200
+@@ -566,19 +566,18 @@ static int __init init_mac80211_hwsim(vo
+ data->band.n_channels = ARRAY_SIZE(hwsim_channels);
+ data->band.bitrates = data->rates;
+ data->band.n_bitrates = ARRAY_SIZE(hwsim_rates);
+- data->band.ht_info.ht_supported = 1;
+- data->band.ht_info.cap = IEEE80211_HT_CAP_SUP_WIDTH |
++ data->band.ht_cap.ht_supported = true;
++ data->band.ht_cap.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_GRN_FLD |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_DSSSCCK40;
+- data->band.ht_info.ampdu_factor = 0x3;
+- data->band.ht_info.ampdu_density = 0x6;
+- memset(data->band.ht_info.supp_mcs_set, 0,
+- sizeof(data->band.ht_info.supp_mcs_set));
+- data->band.ht_info.supp_mcs_set[0] = 0xff;
+- data->band.ht_info.supp_mcs_set[1] = 0xff;
+- data->band.ht_info.supp_mcs_set[12] =
+- IEEE80211_HT_CAP_MCS_TX_DEFINED;
++ data->band.ht_cap.ampdu_factor = 0x3;
++ data->band.ht_cap.ampdu_density = 0x6;
++ memset(&data->band.ht_cap.mcs, 0,
++ sizeof(data->band.ht_cap.mcs));
++ data->band.ht_cap.mcs.rx_mask[0] = 0xff;
++ data->band.ht_cap.mcs.rx_mask[1] = 0xff;
++ data->band.ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &data->band;
+
+ err = ieee80211_register_hw(hw);
--- /dev/null
+Subject: mac80211: kill hw.conf.antenna_sel_{rx,tx}
+
+Never actually used.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ drivers/net/wireless/b43/main.c | 25 +++----------------------
+ drivers/net/wireless/b43legacy/main.c | 18 ++----------------
+ drivers/net/wireless/p54/p54common.c | 3 +--
+ drivers/net/wireless/rt2x00/rt2x00config.c | 20 ++++----------------
+ drivers/net/wireless/rt2x00/rt2x00dev.c | 6 ++----
+ include/net/mac80211.h | 7 +------
+ net/mac80211/debugfs.c | 8 --------
+ net/mac80211/ieee80211_i.h | 2 --
+ net/mac80211/tx.c | 1 -
+ 9 files changed, 13 insertions(+), 77 deletions(-)
+
+--- everything.orig/net/mac80211/debugfs.c 2008-10-08 22:35:20.000000000 +0200
++++ everything/net/mac80211/debugfs.c 2008-10-08 22:35:26.000000000 +0200
+@@ -47,10 +47,6 @@ static const struct file_operations name
+
+ DEBUGFS_READONLY_FILE(frequency, 20, "%d",
+ local->hw.conf.channel->center_freq);
+-DEBUGFS_READONLY_FILE(antenna_sel_tx, 20, "%d",
+- local->hw.conf.antenna_sel_tx);
+-DEBUGFS_READONLY_FILE(antenna_sel_rx, 20, "%d",
+- local->hw.conf.antenna_sel_rx);
+ DEBUGFS_READONLY_FILE(rts_threshold, 20, "%d",
+ local->rts_threshold);
+ DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
+@@ -202,8 +198,6 @@ void debugfs_hw_add(struct ieee80211_loc
+ local->debugfs.keys = debugfs_create_dir("keys", phyd);
+
+ DEBUGFS_ADD(frequency);
+- DEBUGFS_ADD(antenna_sel_tx);
+- DEBUGFS_ADD(antenna_sel_rx);
+ DEBUGFS_ADD(rts_threshold);
+ DEBUGFS_ADD(fragmentation_threshold);
+ DEBUGFS_ADD(short_retry_limit);
+@@ -258,8 +252,6 @@ void debugfs_hw_add(struct ieee80211_loc
+ void debugfs_hw_del(struct ieee80211_local *local)
+ {
+ DEBUGFS_DEL(frequency);
+- DEBUGFS_DEL(antenna_sel_tx);
+- DEBUGFS_DEL(antenna_sel_rx);
+ DEBUGFS_DEL(rts_threshold);
+ DEBUGFS_DEL(fragmentation_threshold);
+ DEBUGFS_DEL(short_retry_limit);
+--- everything.orig/net/mac80211/ieee80211_i.h 2008-10-08 22:35:01.000000000 +0200
++++ everything/net/mac80211/ieee80211_i.h 2008-10-08 22:35:10.000000000 +0200
+@@ -727,8 +727,6 @@ struct ieee80211_local {
+ struct dentry *rcdir;
+ struct dentry *rcname;
+ struct dentry *frequency;
+- struct dentry *antenna_sel_tx;
+- struct dentry *antenna_sel_rx;
+ struct dentry *rts_threshold;
+ struct dentry *fragmentation_threshold;
+ struct dentry *short_retry_limit;
+--- everything.orig/include/net/mac80211.h 2008-10-08 22:35:30.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-08 22:39:56.000000000 +0200
+@@ -324,7 +324,7 @@ struct ieee80211_tx_altrate {
+ * @flags: transmit info flags, defined above
+ * @band: TBD
+ * @tx_rate_idx: TBD
+- * @antenna_sel_tx: TBD
++ * @antenna_sel_tx: antenna to use, 0 for automatic diversity
+ * @control: union for control data
+ * @status: union for status data
+ * @driver_data: array of driver_data pointers
+@@ -474,9 +474,6 @@ static inline int __deprecated __IEEE802
+ * @listen_interval: listen interval in units of beacon interval
+ * @flags: configuration flags defined above
+ * @power_level: requested transmit power (in dBm)
+- * @antenna_sel_tx: transmit antenna selection, 0: default/diversity,
+- * 1/2: antenna 0/1
+- * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx
+ * @ht_cap: describes current self configuration of 802.11n HT capabilities
+ * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters
+ * @channel: the channel to tune to
+@@ -488,8 +485,6 @@ struct ieee80211_conf {
+ u16 listen_interval;
+ u32 flags;
+ int power_level;
+- u8 antenna_sel_tx;
+- u8 antenna_sel_rx;
+
+ struct ieee80211_channel *channel;
+
+--- everything.orig/net/mac80211/tx.c 2008-10-08 22:37:05.000000000 +0200
++++ everything/net/mac80211/tx.c 2008-10-08 22:37:22.000000000 +0200
+@@ -1975,7 +1975,6 @@ struct sk_buff *ieee80211_beacon_get(str
+ sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
+ info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
+
+- info->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
+ info->control.retry_limit = 1;
+
+ out:
+--- everything.orig/drivers/net/wireless/b43/main.c 2008-10-08 22:40:06.000000000 +0200
++++ everything/drivers/net/wireless/b43/main.c 2008-10-08 22:40:45.000000000 +0200
+@@ -1339,25 +1339,6 @@ u8 b43_ieee80211_antenna_sanitize(struct
+ return antenna_nr;
+ }
+
+-static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
+-{
+- antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
+- switch (antenna) {
+- case 0: /* default/diversity */
+- return B43_ANTENNA_DEFAULT;
+- case 1: /* Antenna 0 */
+- return B43_ANTENNA0;
+- case 2: /* Antenna 1 */
+- return B43_ANTENNA1;
+- case 3: /* Antenna 2 */
+- return B43_ANTENNA2;
+- case 4: /* Antenna 3 */
+- return B43_ANTENNA3;
+- default:
+- return B43_ANTENNA_DEFAULT;
+- }
+-}
+-
+ /* Convert a b43 antenna number value to the PHY TX control value. */
+ static u16 b43_antenna_to_phyctl(int antenna)
+ {
+@@ -1399,7 +1380,7 @@ static void b43_write_beacon_template(st
+ len, ram_offset, shm_size_offset, rate);
+
+ /* Write the PHY TX control parameters. */
+- antenna = b43_antenna_from_ieee80211(dev, info->antenna_sel_tx);
++ antenna = B43_ANTENNA_DEFAULT;
+ antenna = b43_antenna_to_phyctl(antenna);
+ ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
+ /* We can't send beacons with short preamble. Would get PHY errors. */
+@@ -3399,9 +3380,9 @@ static int b43_op_config(struct ieee8021
+ }
+
+ /* Antennas for RX and management frame TX. */
+- antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
++ antenna = B43_ANTENNA_DEFAULT;
+ b43_mgmtframe_txantenna(dev, antenna);
+- antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
++ antenna = B43_ANTENNA_DEFAULT;
+ if (phy->ops->set_rx_antenna)
+ phy->ops->set_rx_antenna(dev, antenna);
+
+--- everything.orig/drivers/net/wireless/b43legacy/main.c 2008-10-08 22:41:36.000000000 +0200
++++ everything/drivers/net/wireless/b43legacy/main.c 2008-10-08 22:41:59.000000000 +0200
+@@ -2556,20 +2556,6 @@ init_failure:
+ return err;
+ }
+
+-static int b43legacy_antenna_from_ieee80211(u8 antenna)
+-{
+- switch (antenna) {
+- case 0: /* default/diversity */
+- return B43legacy_ANTENNA_DEFAULT;
+- case 1: /* Antenna 0 */
+- return B43legacy_ANTENNA0;
+- case 2: /* Antenna 1 */
+- return B43legacy_ANTENNA1;
+- default:
+- return B43legacy_ANTENNA_DEFAULT;
+- }
+-}
+-
+ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
+ struct ieee80211_conf *conf)
+ {
+@@ -2583,8 +2569,8 @@ static int b43legacy_op_dev_config(struc
+ int err = 0;
+ u32 savedirqs;
+
+- antenna_tx = b43legacy_antenna_from_ieee80211(conf->antenna_sel_tx);
+- antenna_rx = b43legacy_antenna_from_ieee80211(conf->antenna_sel_rx);
++ antenna_tx = B43legacy_ANTENNA_DEFAULT;
++ antenna_rx = B43legacy_ANTENNA_DEFAULT;
+
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+--- everything.orig/drivers/net/wireless/p54/p54common.c 2008-10-08 22:43:54.000000000 +0200
++++ everything/drivers/net/wireless/p54/p54common.c 2008-10-08 22:44:12.000000000 +0200
+@@ -1211,8 +1211,7 @@ static int p54_config(struct ieee80211_h
+ struct p54_common *priv = dev->priv;
+
+ mutex_lock(&priv->conf_mutex);
+- priv->rx_antenna = (conf->antenna_sel_rx == 0) ?
+- 2 : conf->antenna_sel_tx - 1;
++ priv->rx_antenna = 2; /* automatic */
+ priv->output_power = conf->power_level << 2;
+ ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq));
+ p54_set_vdcf(dev);
+--- everything.orig/drivers/net/wireless/rt2x00/rt2x00config.c 2008-10-08 22:44:57.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt2x00config.c 2008-10-08 22:45:36.000000000 +0200
+@@ -199,23 +199,15 @@ void rt2x00lib_config(struct rt2x00_dev
+ * to work with untill the link tuner decides that an antenna
+ * switch should be performed.
+ */
+- if (!conf->antenna_sel_rx &&
+- default_ant->rx != ANTENNA_SW_DIVERSITY &&
++ if (default_ant->rx != ANTENNA_SW_DIVERSITY &&
+ default_ant->rx != active_ant->rx)
+ flags |= CONFIG_UPDATE_ANTENNA;
+- else if (conf->antenna_sel_rx &&
+- conf->antenna_sel_rx != active_ant->rx)
+- flags |= CONFIG_UPDATE_ANTENNA;
+ else if (active_ant->rx == ANTENNA_SW_DIVERSITY)
+ flags |= CONFIG_UPDATE_ANTENNA;
+
+- if (!conf->antenna_sel_tx &&
+- default_ant->tx != ANTENNA_SW_DIVERSITY &&
++ if (default_ant->tx != ANTENNA_SW_DIVERSITY &&
+ default_ant->tx != active_ant->tx)
+ flags |= CONFIG_UPDATE_ANTENNA;
+- else if (conf->antenna_sel_tx &&
+- conf->antenna_sel_tx != active_ant->tx)
+- flags |= CONFIG_UPDATE_ANTENNA;
+ else if (active_ant->tx == ANTENNA_SW_DIVERSITY)
+ flags |= CONFIG_UPDATE_ANTENNA;
+
+@@ -252,18 +244,14 @@ config:
+ }
+
+ if (flags & CONFIG_UPDATE_ANTENNA) {
+- if (conf->antenna_sel_rx)
+- libconf.ant.rx = conf->antenna_sel_rx;
+- else if (default_ant->rx != ANTENNA_SW_DIVERSITY)
++ if (default_ant->rx != ANTENNA_SW_DIVERSITY)
+ libconf.ant.rx = default_ant->rx;
+ else if (active_ant->rx == ANTENNA_SW_DIVERSITY)
+ libconf.ant.rx = ANTENNA_B;
+ else
+ libconf.ant.rx = active_ant->rx;
+
+- if (conf->antenna_sel_tx)
+- libconf.ant.tx = conf->antenna_sel_tx;
+- else if (default_ant->tx != ANTENNA_SW_DIVERSITY)
++ if (default_ant->tx != ANTENNA_SW_DIVERSITY)
+ libconf.ant.tx = default_ant->tx;
+ else if (active_ant->tx == ANTENNA_SW_DIVERSITY)
+ libconf.ant.tx = ANTENNA_B;
+--- everything.orig/drivers/net/wireless/rt2x00/rt2x00dev.c 2008-10-08 22:44:28.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt2x00dev.c 2008-10-08 22:44:43.000000000 +0200
+@@ -249,11 +249,9 @@ static void rt2x00lib_evaluate_antenna(s
+ rt2x00dev->link.ant.flags &= ~ANTENNA_RX_DIVERSITY;
+ rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
+
+- if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
+- rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
++ if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
+ rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
+- if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
+- rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
++ if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
+ rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
+
+ if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
--- /dev/null
+Subject: mac80211: introduce hw config change flags
+
+This makes mac80211 notify the driver which configuration
+actually changed, e.g. channel etc.
+
+No driver changes, this is just plumbing, driver authors are
+expected to act on this if they want to.
+
+Also remove the HW CONFIG debug printk, it's incorrect, often
+we configure something else.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ drivers/net/wireless/adm8211.c | 3 +-
+ drivers/net/wireless/at76_usb.c | 3 +-
+ drivers/net/wireless/ath5k/base.c | 7 ++----
+ drivers/net/wireless/ath9k/main.c | 4 +--
+ drivers/net/wireless/b43/main.c | 3 +-
+ drivers/net/wireless/b43legacy/main.c | 3 +-
+ drivers/net/wireless/iwlwifi/iwl-agn.c | 3 +-
+ drivers/net/wireless/iwlwifi/iwl3945-base.c | 7 +++---
+ drivers/net/wireless/libertas_tf/main.c | 4 ++-
+ drivers/net/wireless/mac80211_hwsim.c | 4 +--
+ drivers/net/wireless/p54/p54common.c | 3 +-
+ drivers/net/wireless/rt2x00/rt2x00.h | 2 -
+ drivers/net/wireless/rt2x00/rt2x00dev.c | 2 -
+ drivers/net/wireless/rt2x00/rt2x00mac.c | 3 +-
+ drivers/net/wireless/rtl8180_dev.c | 3 +-
+ drivers/net/wireless/rtl8187_dev.c | 3 +-
+ drivers/net/wireless/zd1211rw/zd_mac.c | 4 ++-
+ include/net/mac80211.h | 30 +++++++++++++++++++++++-----
+ net/mac80211/cfg.c | 3 +-
+ net/mac80211/ieee80211_i.h | 2 -
+ net/mac80211/iface.c | 25 +++++++++++++++++------
+ net/mac80211/main.c | 29 ++++++++++++++-------------
+ net/mac80211/scan.c | 12 ++++++++---
+ net/mac80211/util.c | 3 +-
+ net/mac80211/wext.c | 14 ++++++-------
+ 25 files changed, 118 insertions(+), 61 deletions(-)
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -464,12 +464,32 @@ static inline int __deprecated __IEEE802
+ #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
+
+ /**
++ * enum ieee80211_conf_changed - denotes which configuration changed
++ *
++ * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
++ * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
++ * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
++ * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
++ * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
++ * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
++ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
++ */
++enum ieee80211_conf_changed {
++ IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
++ IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
++ IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
++ IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
++ IEEE80211_CONF_CHANGE_PS = BIT(4),
++ IEEE80211_CONF_CHANGE_POWER = BIT(5),
++ IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
++};
++
++/**
+ * struct ieee80211_conf - configuration of the device
+ *
+ * This struct indicates how the driver shall configure the hardware.
+ *
+ * @radio_enabled: when zero, driver is required to switch off the radio.
+- * TODO make a flag
+ * @beacon_int: beacon interval (TODO make interface config)
+ * @listen_interval: listen interval in units of beacon interval
+ * @flags: configuration flags defined above
+@@ -479,13 +499,13 @@ static inline int __deprecated __IEEE802
+ * @channel: the channel to tune to
+ */
+ struct ieee80211_conf {
+- int radio_enabled;
+-
+ int beacon_int;
+- u16 listen_interval;
+ u32 flags;
+ int power_level;
+
++ u16 listen_interval;
++ bool radio_enabled;
++
+ struct ieee80211_channel *channel;
+
+ struct ieee80211_sta_ht_cap ht_cap;
+@@ -1213,7 +1233,7 @@ struct ieee80211_ops {
+ struct ieee80211_if_init_conf *conf);
+ void (*remove_interface)(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+- int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
++ int (*config)(struct ieee80211_hw *hw, u32 changed);
+ int (*config_interface)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf);
+--- a/net/mac80211/cfg.c
++++ b/net/mac80211/cfg.c
+@@ -394,7 +394,8 @@ static int ieee80211_config_beacon(struc
+ */
+ if (params->interval) {
+ sdata->local->hw.conf.beacon_int = params->interval;
+- ieee80211_hw_config(sdata->local);
++ ieee80211_hw_config(sdata->local,
++ IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
+ /*
+ * We updated some parameter so if below bails out
+ * it's not an error.
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -880,7 +880,7 @@ static inline int ieee80211_bssid_match(
+ }
+
+
+-int ieee80211_hw_config(struct ieee80211_local *local);
++int ieee80211_hw_config(struct ieee80211_local *local, u32 changed);
+ int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed);
+ void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
+ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
+--- a/net/mac80211/iface.c
++++ b/net/mac80211/iface.c
+@@ -65,7 +65,7 @@ static int ieee80211_open(struct net_dev
+ struct ieee80211_if_init_conf conf;
+ u32 changed = 0;
+ int res;
+- bool need_hw_reconfig = 0;
++ u32 hw_reconf_flags = 0;
+ u8 null_addr[ETH_ALEN] = {0};
+
+ /* fail early if user set an invalid address */
+@@ -152,7 +152,8 @@ static int ieee80211_open(struct net_dev
+ res = local->ops->start(local_to_hw(local));
+ if (res)
+ goto err_del_bss;
+- need_hw_reconfig = 1;
++ /* we're brought up, everything changes */
++ hw_reconf_flags = ~0;
+ ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+ }
+
+@@ -198,8 +199,10 @@ static int ieee80211_open(struct net_dev
+
+ /* must be before the call to ieee80211_configure_filter */
+ local->monitors++;
+- if (local->monitors == 1)
++ if (local->monitors == 1) {
+ local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
++ hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
++ }
+
+ if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+ local->fif_fcsfail++;
+@@ -279,8 +282,8 @@ static int ieee80211_open(struct net_dev
+ atomic_inc(&local->iff_promiscs);
+
+ local->open_count++;
+- if (need_hw_reconfig) {
+- ieee80211_hw_config(local);
++ if (hw_reconf_flags) {
++ ieee80211_hw_config(local, hw_reconf_flags);
+ /*
+ * set default queue parameters so drivers don't
+ * need to initialise the hardware if the hardware
+@@ -322,6 +325,7 @@ static int ieee80211_stop(struct net_dev
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_init_conf conf;
+ struct sta_info *sta;
++ u32 hw_reconf_flags = 0;
+
+ /*
+ * Stop TX on this interface first.
+@@ -405,8 +409,10 @@ static int ieee80211_stop(struct net_dev
+ }
+
+ local->monitors--;
+- if (local->monitors == 0)
++ if (local->monitors == 0) {
+ local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
++ hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
++ }
+
+ if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+ local->fif_fcsfail--;
+@@ -504,8 +510,15 @@ static int ieee80211_stop(struct net_dev
+
+ tasklet_disable(&local->tx_pending_tasklet);
+ tasklet_disable(&local->tasklet);
++
++ /* no reconfiguring after stop! */
++ hw_reconf_flags = 0;
+ }
+
++ /* do after stop to avoid reconfiguring when we stop anyway */
++ if (hw_reconf_flags)
++ ieee80211_hw_config(local, hw_reconf_flags);
++
+ return 0;
+ }
+
+--- a/net/mac80211/main.c
++++ b/net/mac80211/main.c
+@@ -197,31 +197,34 @@ int ieee80211_if_config(struct ieee80211
+ &sdata->vif, &conf);
+ }
+
+-int ieee80211_hw_config(struct ieee80211_local *local)
++int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
+ {
+ struct ieee80211_channel *chan;
+ int ret = 0;
++ int power;
+
+ if (local->sw_scanning)
+ chan = local->scan_channel;
+ else
+ chan = local->oper_channel;
+
+- local->hw.conf.channel = chan;
++ if (chan != local->hw.conf.channel) {
++ local->hw.conf.channel = chan;
++ changed |= IEEE80211_CONF_CHANGE_CHANNEL;
++ }
++
+
+ if (!local->hw.conf.power_level)
+- local->hw.conf.power_level = chan->max_power;
++ power = chan->max_power;
+ else
+- local->hw.conf.power_level = min(chan->max_power,
+- local->hw.conf.power_level);
+-
+-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+- printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
+- wiphy_name(local->hw.wiphy), chan->center_freq);
+-#endif
++ power = min(chan->max_power, local->hw.conf.power_level);
++ if (local->hw.conf.power_level != power) {
++ changed |= IEEE80211_CONF_CHANGE_POWER;
++ local->hw.conf.power_level = power;
++ }
+
+- if (local->open_count) {
+- ret = local->ops->config(local_to_hw(local), &local->hw.conf);
++ if (changed && local->open_count) {
++ ret = local->ops->config(local_to_hw(local), changed);
+ /*
+ * HW reconfiguration should never fail, the driver has told
+ * us what it can support so it should live up to that promise.
+@@ -672,7 +675,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(
+ local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ local->short_retry_limit = 7;
+ local->long_retry_limit = 4;
+- local->hw.conf.radio_enabled = 1;
++ local->hw.conf.radio_enabled = true;
+
+ INIT_LIST_HEAD(&local->interfaces);
+
+--- a/net/mac80211/scan.c
++++ b/net/mac80211/scan.c
+@@ -447,12 +447,17 @@ void ieee80211_scan_completed(struct iee
+
+ if (local->hw_scanning) {
+ local->hw_scanning = false;
+- ieee80211_hw_config(local);
++ /*
++ * Somebody might have requested channel change during scan
++ * that we won't have acted upon, try now. ieee80211_hw_config
++ * will set the flag based on actual changes.
++ */
++ ieee80211_hw_config(local, 0);
+ goto done;
+ }
+
+ local->sw_scanning = false;
+- ieee80211_hw_config(local);
++ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+
+ netif_tx_lock_bh(local->mdev);
+ netif_addr_lock(local->mdev);
+@@ -539,7 +544,8 @@ void ieee80211_scan_work(struct work_str
+
+ if (!skip) {
+ local->scan_channel = chan;
+- if (ieee80211_hw_config(local))
++ if (ieee80211_hw_config(local,
++ IEEE80211_CONF_CHANGE_CHANNEL))
+ skip = 1;
+ }
+
+--- a/net/mac80211/util.c
++++ b/net/mac80211/util.c
+@@ -645,7 +645,8 @@ int ieee80211_set_freq(struct ieee80211_
+ if (local->sw_scanning || local->hw_scanning)
+ ret = 0;
+ else
+- ret = ieee80211_hw_config(local);
++ ret = ieee80211_hw_config(
++ local, IEEE80211_CONF_CHANGE_CHANNEL);
+
+ rate_control_clear(local);
+ }
+--- a/net/mac80211/wext.c
++++ b/net/mac80211/wext.c
+@@ -656,7 +656,7 @@ static int ieee80211_ioctl_siwtxpower(st
+ union iwreq_data *data, char *extra)
+ {
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+- bool need_reconfig = 0;
++ u32 reconf_flags = 0;
+ int new_power_level;
+
+ if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
+@@ -680,17 +680,17 @@ static int ieee80211_ioctl_siwtxpower(st
+
+ if (local->hw.conf.power_level != new_power_level) {
+ local->hw.conf.power_level = new_power_level;
+- need_reconfig = 1;
++ reconf_flags |= IEEE80211_CONF_CHANGE_POWER;
+ }
+
+ if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
+ local->hw.conf.radio_enabled = !(data->txpower.disabled);
+- need_reconfig = 1;
++ reconf_flags |= IEEE80211_CONF_CHANGE_RADIO_ENABLED;
+ ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+ }
+
+- if (need_reconfig)
+- ieee80211_hw_config(local);
++ if (reconf_flags)
++ ieee80211_hw_config(local, reconf_flags);
+
+ return 0;
+ }
+@@ -976,7 +976,7 @@ static int ieee80211_ioctl_siwpower(stru
+
+ if (wrq->disabled) {
+ conf->flags &= ~IEEE80211_CONF_PS;
+- return ieee80211_hw_config(local);
++ return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ }
+
+ switch (wrq->flags & IW_POWER_MODE) {
+@@ -989,7 +989,7 @@ static int ieee80211_ioctl_siwpower(stru
+ return -EINVAL;
+ }
+
+- return ieee80211_hw_config(local);
++ return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
+ }
+
+ static int ieee80211_ioctl_giwpower(struct net_device *dev,
+--- a/drivers/net/wireless/adm8211.c
++++ b/drivers/net/wireless/adm8211.c
+@@ -1314,9 +1314,10 @@ static int adm8211_set_ssid(struct ieee8
+ return 0;
+ }
+
+-static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
++static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
+ {
+ struct adm8211_priv *priv = dev->priv;
++ struct ieee80211_conf *conf = &dev->conf;
+ int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+ if (channel != priv->channel) {
+--- a/drivers/net/wireless/at76_usb.c
++++ b/drivers/net/wireless/at76_usb.c
+@@ -2057,9 +2057,10 @@ exit:
+ return 0;
+ }
+
+-static int at76_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
++static int at76_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct at76_priv *priv = hw->priv;
++ struct ieee80211_conf *conf = &hw->conf;
+
+ at76_dbg(DBG_MAC80211, "%s(): channel %d radio %d",
+ __func__, conf->channel->hw_value, conf->radio_enabled);
+--- a/drivers/net/wireless/ath5k/base.c
++++ b/drivers/net/wireless/ath5k/base.c
+@@ -219,8 +219,7 @@ static int ath5k_add_interface(struct ie
+ struct ieee80211_if_init_conf *conf);
+ static void ath5k_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+-static int ath5k_config(struct ieee80211_hw *hw,
+- struct ieee80211_conf *conf);
++static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
+ static int ath5k_config_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf);
+@@ -2767,10 +2766,10 @@ end:
+ * TODO: Phy disable/diversity etc
+ */
+ static int
+-ath5k_config(struct ieee80211_hw *hw,
+- struct ieee80211_conf *conf)
++ath5k_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct ath5k_softc *sc = hw->priv;
++ struct ieee80211_conf *conf = &hw->conf;
+
+ sc->bintval = conf->beacon_int;
+ sc->power_level = conf->power_level;
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -1231,11 +1231,11 @@ static void ath9k_remove_interface(struc
+ __func__, error);
+ }
+
+-static int ath9k_config(struct ieee80211_hw *hw,
+- struct ieee80211_conf *conf)
++static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct ath_softc *sc = hw->priv;
+ struct ieee80211_channel *curchan = hw->conf.channel;
++ struct ieee80211_conf *conf = &hw->conf;
+ int pos;
+
+ DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -3320,11 +3320,12 @@ init_failure:
+ return err;
+ }
+
+-static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
++static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct b43_wl *wl = hw_to_b43_wl(hw);
+ struct b43_wldev *dev;
+ struct b43_phy *phy;
++ struct ieee80211_conf *conf = &hw->conf;
+ unsigned long flags;
+ int antenna;
+ int err = 0;
+--- a/drivers/net/wireless/b43legacy/main.c
++++ b/drivers/net/wireless/b43legacy/main.c
+@@ -2557,11 +2557,12 @@ init_failure:
+ }
+
+ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
+- struct ieee80211_conf *conf)
++ u32 changed)
+ {
+ struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
+ struct b43legacy_wldev *dev;
+ struct b43legacy_phy *phy;
++ struct ieee80211_conf *conf = &hw->conf;
+ unsigned long flags;
+ unsigned int new_phymode = 0xFFFF;
+ int antenna_tx;
+--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
++++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
+@@ -2760,10 +2760,11 @@ static int iwl4965_mac_add_interface(str
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+-static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
++static int iwl4965_mac_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct iwl_priv *priv = hw->priv;
+ const struct iwl_channel_info *ch_info;
++ struct ieee80211_conf *conf = &hw->conf;
+ unsigned long flags;
+ int ret = 0;
+ u16 channel;
+--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
++++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
+@@ -6427,7 +6427,7 @@ static void iwl3945_bg_abort_scan(struct
+ mutex_unlock(&priv->mutex);
+ }
+
+-static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
++static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
+
+ static void iwl3945_bg_scan_completed(struct work_struct *work)
+ {
+@@ -6440,7 +6440,7 @@ static void iwl3945_bg_scan_completed(st
+ return;
+
+ if (test_bit(STATUS_CONF_PENDING, &priv->status))
+- iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
++ iwl3945_mac_config(priv->hw, 0);
+
+ ieee80211_scan_completed(priv->hw);
+
+@@ -6629,10 +6629,11 @@ static int iwl3945_mac_add_interface(str
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+-static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
++static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct iwl3945_priv *priv = hw->priv;
+ const struct iwl3945_channel_info *ch_info;
++ struct ieee80211_conf *conf = &hw->conf;
+ unsigned long flags;
+ int ret = 0;
+
+--- a/drivers/net/wireless/mac80211_hwsim.c
++++ b/drivers/net/wireless/mac80211_hwsim.c
+@@ -361,10 +361,10 @@ static void mac80211_hwsim_beacon(unsign
+ }
+
+
+-static int mac80211_hwsim_config(struct ieee80211_hw *hw,
+- struct ieee80211_conf *conf)
++static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct mac80211_hwsim_data *data = hw->priv;
++ struct ieee80211_conf *conf = &hw->conf;
+
+ printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
+ wiphy_name(hw->wiphy), __func__,
+--- a/drivers/net/wireless/p54/p54common.c
++++ b/drivers/net/wireless/p54/p54common.c
+@@ -1205,10 +1205,11 @@ static void p54_remove_interface(struct
+ p54_set_filter(dev, 0, NULL);
+ }
+
+-static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
++static int p54_config(struct ieee80211_hw *dev, u32 changed)
+ {
+ int ret;
+ struct p54_common *priv = dev->priv;
++ struct ieee80211_conf *conf = &dev->conf;
+
+ mutex_lock(&priv->conf_mutex);
+ priv->rx_antenna = 2; /* automatic */
+--- a/drivers/net/wireless/rt2x00/rt2x00.h
++++ b/drivers/net/wireless/rt2x00/rt2x00.h
+@@ -997,7 +997,7 @@ int rt2x00mac_add_interface(struct ieee8
+ struct ieee80211_if_init_conf *conf);
+ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf);
+-int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
++int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
+ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf);
+--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
++++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
+@@ -335,9 +335,10 @@ void rt2x00mac_remove_interface(struct i
+ }
+ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
+
+-int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
++int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct rt2x00_dev *rt2x00dev = hw->priv;
++ struct ieee80211_conf *conf = &hw->conf;
+ int radio_on;
+ int status;
+
+--- a/drivers/net/wireless/rtl8180_dev.c
++++ b/drivers/net/wireless/rtl8180_dev.c
+@@ -692,9 +692,10 @@ static void rtl8180_remove_interface(str
+ priv->vif = NULL;
+ }
+
+-static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
++static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
+ {
+ struct rtl8180_priv *priv = dev->priv;
++ struct ieee80211_conf *conf = &dev->conf;
+
+ priv->rf->set_chan(dev, conf);
+
+--- a/drivers/net/wireless/rtl8187_dev.c
++++ b/drivers/net/wireless/rtl8187_dev.c
+@@ -870,9 +870,10 @@ static void rtl8187_remove_interface(str
+ mutex_unlock(&priv->conf_mutex);
+ }
+
+-static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
++static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
+ {
+ struct rtl8187_priv *priv = dev->priv;
++ struct ieee80211_conf *conf = &dev->conf;
+ u32 reg;
+
+ mutex_lock(&priv->conf_mutex);
+--- a/drivers/net/wireless/zd1211rw/zd_mac.c
++++ b/drivers/net/wireless/zd1211rw/zd_mac.c
+@@ -743,9 +743,11 @@ static void zd_op_remove_interface(struc
+ zd_write_mac_addr(&mac->chip, NULL);
+ }
+
+-static int zd_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
++static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct zd_mac *mac = zd_hw_mac(hw);
++ struct ieee80211_conf *conf = &hw->conf;
++
+ return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
+ }
+
+--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+@@ -1245,7 +1245,7 @@ int rt2x00lib_resume(struct rt2x00_dev *
+ /*
+ * Reconfigure device.
+ */
+- retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
++ retval = rt2x00mac_config(rt2x00dev->hw, ~0);
+ if (retval)
+ goto exit;
+
--- /dev/null
+Subject: nl80211: export HT capabilities
+
+This exports the local HT capabilities in nl80211.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ include/linux/nl80211.h | 12 ++++++++++++
+ net/wireless/nl80211.c | 13 +++++++++++++
+ 2 files changed, 25 insertions(+)
+
+--- everything.orig/include/linux/nl80211.h 2008-10-09 01:31:09.000000000 +0200
++++ everything/include/linux/nl80211.h 2008-10-09 02:11:44.000000000 +0200
+@@ -452,17 +452,29 @@ enum nl80211_mpath_info {
+ * an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ * an array of nested bitrate attributes
++ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
++ * defined in 802.11n
++ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
++ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
++ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ */
+ enum nl80211_band_attr {
+ __NL80211_BAND_ATTR_INVALID,
+ NL80211_BAND_ATTR_FREQS,
+ NL80211_BAND_ATTR_RATES,
+
++ NL80211_BAND_ATTR_HT_MCS_SET,
++ NL80211_BAND_ATTR_HT_CAPA,
++ NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
++ NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
++
+ /* keep last */
+ __NL80211_BAND_ATTR_AFTER_LAST,
+ NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+ };
+
++#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
++
+ /**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+--- everything.orig/net/wireless/nl80211.c 2008-10-09 01:32:05.000000000 +0200
++++ everything/net/wireless/nl80211.c 2008-10-09 02:12:21.000000000 +0200
+@@ -157,6 +157,19 @@ static int nl80211_send_wiphy(struct sk_
+ if (!nl_band)
+ goto nla_put_failure;
+
++ /* add HT info */
++ if (dev->wiphy.bands[band]->ht_cap.ht_supported) {
++ NLA_PUT(msg, NL80211_BAND_ATTR_HT_MCS_SET,
++ sizeof(dev->wiphy.bands[band]->ht_cap.mcs),
++ &dev->wiphy.bands[band]->ht_cap.mcs);
++ NLA_PUT_U16(msg, NL80211_BAND_ATTR_HT_CAPA,
++ dev->wiphy.bands[band]->ht_cap.cap);
++ NLA_PUT_U8(msg, NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
++ dev->wiphy.bands[band]->ht_cap.ampdu_factor);
++ NLA_PUT_U8(msg, NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
++ dev->wiphy.bands[band]->ht_cap.ampdu_density);
++ }
++
+ /* add frequencies */
+ nl_freqs = nla_nest_start(msg, NL80211_BAND_ATTR_FREQS);
+ if (!nl_freqs)
--- /dev/null
+Subject: mac80211: provide sequence numbers
+
+I've come to think that not providing sequence numbers for
+the normal STA mode case was a mistake, at least two drivers
+now had to implement code they wouldn't otherwise need, and
+I believe at76_usb and adm8211 might be broken.
+
+This patch makes mac80211 assign a sequence number to all
+those frames that need one except beacons. That means that
+if a driver only implements modes that do not do beaconing
+it need not worry about the sequence number.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ drivers/net/wireless/p54/p54.h | 1 -
+ drivers/net/wireless/p54/p54common.c | 18 +++++-------------
+ drivers/net/wireless/rtl8187.h | 1 -
+ drivers/net/wireless/rtl8187_dev.c | 18 ++++--------------
+ net/mac80211/ieee80211_i.h | 2 ++
+ net/mac80211/tx.c | 10 ++++++++++
+ 6 files changed, 21 insertions(+), 29 deletions(-)
+
+--- everything.orig/net/mac80211/ieee80211_i.h 2008-10-10 15:45:52.000000000 +0200
++++ everything/net/mac80211/ieee80211_i.h 2008-10-10 15:45:56.000000000 +0200
+@@ -438,6 +438,8 @@ struct ieee80211_sub_if_data {
+ struct ieee80211_key *keys[NUM_DEFAULT_KEYS];
+ struct ieee80211_key *default_key;
+
++ u16 sequence_number;
++
+ /* BSS configuration for this interface. */
+ struct ieee80211_bss_conf bss_conf;
+
+--- everything.orig/net/mac80211/tx.c 2008-10-10 15:45:48.000000000 +0200
++++ everything/net/mac80211/tx.c 2008-10-10 15:45:56.000000000 +0200
+@@ -602,8 +602,18 @@ ieee80211_tx_h_sequence(struct ieee80211
+ if (ieee80211_hdrlen(hdr->frame_control) < 24)
+ return TX_CONTINUE;
+
++ /*
++ * Anything but QoS data that has a sequence number field
++ * (is long enough) gets a sequence number from the global
++ * counter.
++ */
+ if (!ieee80211_is_data_qos(hdr->frame_control)) {
++ /* driver should assign sequence number */
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
++ /* for pure STA mode without beacons, we can do it */
++ hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number);
++ tx->sdata->sequence_number += 0x10;
++ tx->sdata->sequence_number &= IEEE80211_SCTL_SEQ;
+ return TX_CONTINUE;
+ }
+
+--- everything.orig/drivers/net/wireless/p54/p54.h 2008-10-10 15:45:49.000000000 +0200
++++ everything/drivers/net/wireless/p54/p54.h 2008-10-10 15:45:56.000000000 +0200
+@@ -67,7 +67,6 @@ struct p54_common {
+ int (*open)(struct ieee80211_hw *dev);
+ void (*stop)(struct ieee80211_hw *dev);
+ int mode;
+- u16 seqno;
+ u16 rx_mtu;
+ u8 headroom;
+ u8 tailroom;
+--- everything.orig/drivers/net/wireless/p54/p54common.c 2008-10-10 15:45:49.000000000 +0200
++++ everything/drivers/net/wireless/p54/p54common.c 2008-10-10 15:45:56.000000000 +0200
+@@ -865,19 +865,6 @@ static int p54_tx(struct ieee80211_hw *d
+ if (padding)
+ txhdr->align[0] = padding;
+
+- /* FIXME: The sequence that follows is needed for this driver to
+- * work with mac80211 since "mac80211: fix TX sequence numbers".
+- * As with the temporary code in rt2x00, changes will be needed
+- * to get proper sequence numbers on beacons. In addition, this
+- * patch places the sequence number in the hardware state, which
+- * limits us to a single virtual state.
+- */
+- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+- if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+- priv->seqno += 0x10;
+- ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+- ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+- }
+ /* modifies skb->cb and with it info, so must be last! */
+ p54_assign_address(dev, skb, hdr, skb->len);
+
+@@ -1391,6 +1378,11 @@ struct ieee80211_hw *p54_init_common(siz
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
++ /*
++ * XXX: when this driver gets support for any mode that
++ * requires beacons (AP, MESH, IBSS) then it must
++ * implement IEEE80211_TX_CTL_ASSIGN_SEQ.
++ */
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+ dev->channel_change_time = 1000; /* TODO: find actual value */
+--- everything.orig/drivers/net/wireless/rtl8187_dev.c 2008-10-10 15:45:49.000000000 +0200
++++ everything/drivers/net/wireless/rtl8187_dev.c 2008-10-10 15:45:56.000000000 +0200
+@@ -238,20 +238,6 @@ static int rtl8187_tx(struct ieee80211_h
+ ep = epmap[skb_get_queue_mapping(skb)];
+ }
+
+- /* FIXME: The sequence that follows is needed for this driver to
+- * work with mac80211 since "mac80211: fix TX sequence numbers".
+- * As with the temporary code in rt2x00, changes will be needed
+- * to get proper sequence numbers on beacons. In addition, this
+- * patch places the sequence number in the hardware state, which
+- * limits us to a single virtual state.
+- */
+- if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+- if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+- priv->seqno += 0x10;
+- ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+- ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+- }
+-
+ info->driver_data[0] = dev;
+ info->driver_data[1] = urb;
+
+@@ -1185,6 +1171,10 @@ static int __devinit rtl8187_probe(struc
+ dev->max_signal = 65;
+ }
+
++ /*
++ * XXX: Once this driver supports anything that requires
++ * beacons it must implement IEEE80211_TX_CTL_ASSIGN_SEQ.
++ */
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+ if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
+--- everything.orig/drivers/net/wireless/rtl8187.h 2008-10-10 15:45:49.000000000 +0200
++++ everything/drivers/net/wireless/rtl8187.h 2008-10-10 15:45:56.000000000 +0200
+@@ -100,7 +100,6 @@ struct rtl8187_priv {
+ struct usb_device *udev;
+ u32 rx_conf;
+ u16 txpwr_base;
+- u16 seqno;
+ u8 asic_rev;
+ u8 is_rtl8187b;
+ enum {
--- /dev/null
+Subject: mac80211: move bss_conf into vif
+
+Move bss_conf into the vif struct so that drivers can
+access it during ->tx without having to store it in
+the private data or similar. No driver updates because
+this is only for when they want to start using it.
+
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ include/net/mac80211.h | 3 +++
+ net/mac80211/cfg.c | 6 +++---
+ net/mac80211/debugfs_netdev.c | 2 +-
+ net/mac80211/ieee80211_i.h | 3 ---
+ net/mac80211/iface.c | 2 +-
+ net/mac80211/main.c | 8 ++++----
+ net/mac80211/mlme.c | 30 +++++++++++++++---------------
+ net/mac80211/tx.c | 16 ++++++++--------
+ net/mac80211/util.c | 6 +++---
+ 9 files changed, 38 insertions(+), 38 deletions(-)
+
+--- everything.orig/include/net/mac80211.h 2008-10-10 17:09:04.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-10 17:09:41.000000000 +0200
+@@ -519,11 +519,14 @@ struct ieee80211_conf {
+ * use during the life of a virtual interface.
+ *
+ * @type: type of this virtual interface
++ * @bss_conf: BSS configuration for this interface, either our own
++ * or the BSS we're associated to
+ * @drv_priv: data area for driver use, will always be aligned to
+ * sizeof(void *).
+ */
+ struct ieee80211_vif {
+ enum nl80211_iftype type;
++ struct ieee80211_bss_conf bss_conf;
+ /* must be last */
+ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+ };
+--- everything.orig/net/mac80211/ieee80211_i.h 2008-10-10 17:10:40.000000000 +0200
++++ everything/net/mac80211/ieee80211_i.h 2008-10-10 17:10:45.000000000 +0200
+@@ -440,9 +440,6 @@ struct ieee80211_sub_if_data {
+
+ u16 sequence_number;
+
+- /* BSS configuration for this interface. */
+- struct ieee80211_bss_conf bss_conf;
+-
+ /*
+ * AP this belongs to: self in AP mode and
+ * corresponding AP in VLAN mode, NULL for
+--- everything.orig/net/mac80211/main.c 2008-10-10 17:10:55.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-10 17:11:10.000000000 +0200
+@@ -249,15 +249,15 @@ void ieee80211_bss_info_change_notify(st
+ if (local->ops->bss_info_changed)
+ local->ops->bss_info_changed(local_to_hw(local),
+ &sdata->vif,
+- &sdata->bss_conf,
++ &sdata->vif.bss_conf,
+ changed);
+ }
+
+ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
+ {
+- sdata->bss_conf.use_cts_prot = false;
+- sdata->bss_conf.use_short_preamble = false;
+- sdata->bss_conf.use_short_slot = false;
++ sdata->vif.bss_conf.use_cts_prot = false;
++ sdata->vif.bss_conf.use_short_preamble = false;
++ sdata->vif.bss_conf.use_short_slot = false;
+ return BSS_CHANGED_ERP_CTS_PROT |
+ BSS_CHANGED_ERP_PREAMBLE |
+ BSS_CHANGED_ERP_SLOT;
+--- everything.orig/net/mac80211/iface.c 2008-10-10 17:12:11.000000000 +0200
++++ everything/net/mac80211/iface.c 2008-10-10 17:12:13.000000000 +0200
+@@ -695,7 +695,7 @@ int ieee80211_if_change_type(struct ieee
+ ieee80211_setup_sdata(sdata, type);
+
+ /* reset some values that shouldn't be kept across type changes */
+- sdata->bss_conf.basic_rates =
++ sdata->vif.bss_conf.basic_rates =
+ ieee80211_mandatory_rates(sdata->local,
+ sdata->local->hw.conf.channel->band);
+ sdata->drop_unencrypted = 0;
+--- everything.orig/net/mac80211/mlme.c 2008-10-10 17:11:49.000000000 +0200
++++ everything/net/mac80211/mlme.c 2008-10-10 17:11:58.000000000 +0200
+@@ -572,7 +572,7 @@ static void ieee80211_sta_wmm_params(str
+ static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
+ u16 capab, bool erp_valid, u8 erp)
+ {
+- struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
++ struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+ #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ DECLARE_MAC_BUF(mac);
+@@ -720,9 +720,9 @@ static void ieee80211_set_associated(str
+ ifsta->ssid, ifsta->ssid_len);
+ if (bss) {
+ /* set timing information */
+- sdata->bss_conf.beacon_int = bss->beacon_int;
+- sdata->bss_conf.timestamp = bss->timestamp;
+- sdata->bss_conf.dtim_period = bss->dtim_period;
++ sdata->vif.bss_conf.beacon_int = bss->beacon_int;
++ sdata->vif.bss_conf.timestamp = bss->timestamp;
++ sdata->vif.bss_conf.dtim_period = bss->dtim_period;
+
+ changed |= ieee80211_handle_bss_capability(sdata,
+ bss->capability, bss->has_erp_value, bss->erp_value);
+@@ -732,9 +732,9 @@ static void ieee80211_set_associated(str
+
+ if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+ changed |= BSS_CHANGED_HT;
+- sdata->bss_conf.assoc_ht = 1;
+- sdata->bss_conf.ht_cap = &conf->ht_cap;
+- sdata->bss_conf.ht_bss_conf = &conf->ht_bss_conf;
++ sdata->vif.bss_conf.assoc_ht = 1;
++ sdata->vif.bss_conf.ht_cap = &conf->ht_cap;
++ sdata->vif.bss_conf.ht_bss_conf = &conf->ht_bss_conf;
+ }
+
+ ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET;
+@@ -744,7 +744,7 @@ static void ieee80211_set_associated(str
+ ifsta->last_probe = jiffies;
+ ieee80211_led_assoc(local, 1);
+
+- sdata->bss_conf.assoc = 1;
++ sdata->vif.bss_conf.assoc = 1;
+ /*
+ * For now just always ask the driver to update the basic rateset
+ * when we have associated, we aren't checking whether it actually
+@@ -853,15 +853,15 @@ static void ieee80211_set_disassoc(struc
+ ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
+ changed |= ieee80211_reset_erp_info(sdata);
+
+- if (sdata->bss_conf.assoc_ht)
++ if (sdata->vif.bss_conf.assoc_ht)
+ changed |= BSS_CHANGED_HT;
+
+- sdata->bss_conf.assoc_ht = 0;
+- sdata->bss_conf.ht_cap = NULL;
+- sdata->bss_conf.ht_bss_conf = NULL;
++ sdata->vif.bss_conf.assoc_ht = 0;
++ sdata->vif.bss_conf.ht_cap = NULL;
++ sdata->vif.bss_conf.ht_bss_conf = NULL;
+
+ ieee80211_led_assoc(local, 0);
+- sdata->bss_conf.assoc = 0;
++ sdata->vif.bss_conf.assoc = 0;
+
+ ieee80211_sta_send_apinfo(sdata, ifsta);
+
+@@ -1194,7 +1194,7 @@ static void ieee80211_rx_mgmt_assoc_resp
+ u64 rates, basic_rates;
+ u16 capab_info, status_code, aid;
+ struct ieee802_11_elems elems;
+- struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
++ struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+ u8 *pos;
+ int i, j;
+ DECLARE_MAC_BUF(mac);
+@@ -1337,7 +1337,7 @@ static void ieee80211_rx_mgmt_assoc_resp
+ }
+
+ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+- sdata->bss_conf.basic_rates = basic_rates;
++ sdata->vif.bss_conf.basic_rates = basic_rates;
+
+ /* cf. IEEE 802.11 9.2.12 */
+ if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
+--- everything.orig/net/mac80211/cfg.c 2008-10-10 17:12:29.000000000 +0200
++++ everything/net/mac80211/cfg.c 2008-10-10 17:12:31.000000000 +0200
+@@ -966,16 +966,16 @@ static int ieee80211_change_bss(struct w
+ return -EINVAL;
+
+ if (params->use_cts_prot >= 0) {
+- sdata->bss_conf.use_cts_prot = params->use_cts_prot;
++ sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
+ changed |= BSS_CHANGED_ERP_CTS_PROT;
+ }
+ if (params->use_short_preamble >= 0) {
+- sdata->bss_conf.use_short_preamble =
++ sdata->vif.bss_conf.use_short_preamble =
+ params->use_short_preamble;
+ changed |= BSS_CHANGED_ERP_PREAMBLE;
+ }
+ if (params->use_short_slot_time >= 0) {
+- sdata->bss_conf.use_short_slot =
++ sdata->vif.bss_conf.use_short_slot =
+ params->use_short_slot_time;
+ changed |= BSS_CHANGED_ERP_SLOT;
+ }
+--- everything.orig/net/mac80211/debugfs_netdev.c 2008-10-10 17:13:26.000000000 +0200
++++ everything/net/mac80211/debugfs_netdev.c 2008-10-10 17:13:28.000000000 +0200
+@@ -120,7 +120,7 @@ static ssize_t ieee80211_if_fmt_flags(
+ sdata->u.sta.flags & IEEE80211_STA_AUTHENTICATED ? "AUTH\n" : "",
+ sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED ? "ASSOC\n" : "",
+ sdata->u.sta.flags & IEEE80211_STA_PROBEREQ_POLL ? "PROBEREQ POLL\n" : "",
+- sdata->bss_conf.use_cts_prot ? "CTS prot\n" : "");
++ sdata->vif.bss_conf.use_cts_prot ? "CTS prot\n" : "");
+ }
+ __IEEE80211_IF_FILE(flags);
+
+--- everything.orig/net/mac80211/tx.c 2008-10-10 17:12:46.000000000 +0200
++++ everything/net/mac80211/tx.c 2008-10-10 17:12:49.000000000 +0200
+@@ -116,7 +116,7 @@ static __le16 ieee80211_duration(struct
+ if (r->bitrate > txrate->bitrate)
+ break;
+
+- if (tx->sdata->bss_conf.basic_rates & BIT(i))
++ if (tx->sdata->vif.bss_conf.basic_rates & BIT(i))
+ rate = r->bitrate;
+
+ switch (sband->band) {
+@@ -150,7 +150,7 @@ static __le16 ieee80211_duration(struct
+ * to closest integer */
+
+ dur = ieee80211_frame_duration(local, 10, rate, erp,
+- tx->sdata->bss_conf.use_short_preamble);
++ tx->sdata->vif.bss_conf.use_short_preamble);
+
+ if (next_frag_len) {
+ /* Frame is fragmented: duration increases with time needed to
+@@ -159,7 +159,7 @@ static __le16 ieee80211_duration(struct
+ /* next fragment */
+ dur += ieee80211_frame_duration(local, next_frag_len,
+ txrate->bitrate, erp,
+- tx->sdata->bss_conf.use_short_preamble);
++ tx->sdata->vif.bss_conf.use_short_preamble);
+ }
+
+ return cpu_to_le16(dur);
+@@ -465,7 +465,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee8021
+ } else
+ info->control.retries[0].rate_idx = -1;
+
+- if (tx->sdata->bss_conf.use_cts_prot &&
++ if (tx->sdata->vif.bss_conf.use_cts_prot &&
+ (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) {
+ tx->last_frag_rate_idx = tx->rate_idx;
+ if (rsel.probe_idx >= 0)
+@@ -531,7 +531,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_
+ if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) &&
+ (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) &&
+ (tx->flags & IEEE80211_TX_UNICAST) &&
+- tx->sdata->bss_conf.use_cts_prot &&
++ tx->sdata->vif.bss_conf.use_cts_prot &&
+ !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS))
+ info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT;
+
+@@ -540,7 +540,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_
+ * available on the network at the current point in time. */
+ if (ieee80211_is_data(hdr->frame_control) &&
+ (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) &&
+- tx->sdata->bss_conf.use_short_preamble &&
++ tx->sdata->vif.bss_conf.use_short_preamble &&
+ (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) {
+ info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
+ }
+@@ -560,7 +560,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_
+ for (idx = 0; idx < sband->n_bitrates; idx++) {
+ if (sband->bitrates[idx].bitrate > rate->bitrate)
+ continue;
+- if (tx->sdata->bss_conf.basic_rates & BIT(idx) &&
++ if (tx->sdata->vif.bss_conf.basic_rates & BIT(idx) &&
+ (baserate < 0 ||
+ (sband->bitrates[baserate].bitrate
+ < sband->bitrates[idx].bitrate)))
+@@ -1981,7 +1981,7 @@ struct sk_buff *ieee80211_beacon_get(str
+ info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
+- if (sdata->bss_conf.use_short_preamble &&
++ if (sdata->vif.bss_conf.use_short_preamble &&
+ sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
+ info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
+
+--- everything.orig/net/mac80211/util.c 2008-10-10 17:13:03.000000000 +0200
++++ everything/net/mac80211/util.c 2008-10-10 17:13:06.000000000 +0200
+@@ -239,7 +239,7 @@ __le16 ieee80211_generic_frame_duration(
+ erp = 0;
+ if (vif) {
+ sdata = vif_to_sdata(vif);
+- short_preamble = sdata->bss_conf.use_short_preamble;
++ short_preamble = sdata->vif.bss_conf.use_short_preamble;
+ if (sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
+ erp = rate->flags & IEEE80211_RATE_ERP_G;
+ }
+@@ -272,7 +272,7 @@ __le16 ieee80211_rts_duration(struct iee
+ erp = 0;
+ if (vif) {
+ sdata = vif_to_sdata(vif);
+- short_preamble = sdata->bss_conf.use_short_preamble;
++ short_preamble = sdata->vif.bss_conf.use_short_preamble;
+ if (sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
+ erp = rate->flags & IEEE80211_RATE_ERP_G;
+ }
+@@ -312,7 +312,7 @@ __le16 ieee80211_ctstoself_duration(stru
+ erp = 0;
+ if (vif) {
+ sdata = vif_to_sdata(vif);
+- short_preamble = sdata->bss_conf.use_short_preamble;
++ short_preamble = sdata->vif.bss_conf.use_short_preamble;
+ if (sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
+ erp = rate->flags & IEEE80211_RATE_ERP_G;
+ }
--- /dev/null
+---
+ drivers/net/wireless/ath9k/main.c | 1
+ drivers/net/wireless/b43/main.c | 67 +++++++++++++-----------------
+ drivers/net/wireless/b43legacy/main.c | 70 ++++++++++++++------------------
+ drivers/net/wireless/rt2x00/rt2400pci.c | 2
+ drivers/net/wireless/rt2x00/rt2500pci.c | 2
+ drivers/net/wireless/rt2x00/rt2x00.h | 3 +
+ drivers/net/wireless/rt2x00/rt2x00mac.c | 9 ++++
+ drivers/net/wireless/rt2x00/rt61pci.c | 2
+ drivers/net/wireless/rt2x00/rt73usb.c | 2
+ include/net/mac80211.h | 14 ++++--
+ net/mac80211/debugfs.c | 4 -
+ net/mac80211/ieee80211_i.h | 2
+ net/mac80211/main.c | 4 -
+ net/mac80211/tx.c | 4 -
+ net/mac80211/wext.c | 28 +++++-------
+ 15 files changed, 106 insertions(+), 108 deletions(-)
+
+--- everything.orig/include/net/mac80211.h 2008-10-10 23:27:46.000000000 +0200
++++ everything/include/net/mac80211.h 2008-10-10 23:31:21.000000000 +0200
+@@ -473,6 +473,7 @@ static inline int __deprecated __IEEE802
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
+ * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
+ * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
++ * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ */
+ enum ieee80211_conf_changed {
+ IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
+@@ -482,6 +483,7 @@ enum ieee80211_conf_changed {
+ IEEE80211_CONF_CHANGE_PS = BIT(4),
+ IEEE80211_CONF_CHANGE_POWER = BIT(5),
+ IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
++ IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
+ };
+
+ /**
+@@ -497,6 +499,12 @@ enum ieee80211_conf_changed {
+ * @ht_cap: describes current self configuration of 802.11n HT capabilities
+ * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters
+ * @channel: the channel to tune to
++ * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
++ * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
++ * but actually means the number of transmissions not the number of retries
++ * @short_frame_max_tx_count: Maximum number of transmissions for a "short" frame,
++ * called "dot11ShortRetryLimit" in 802.11, but actually means the number
++ * of transmissions not the number of retries
+ */
+ struct ieee80211_conf {
+ int beacon_int;
+@@ -506,6 +514,8 @@ struct ieee80211_conf {
+ u16 listen_interval;
+ bool radio_enabled;
+
++ u8 long_frame_max_tx_count, short_frame_max_tx_count;
++
+ struct ieee80211_channel *channel;
+
+ struct ieee80211_sta_ht_cap ht_cap;
+@@ -1192,8 +1202,6 @@ enum ieee80211_ampdu_mlme_action {
+ * the device does fragmentation by itself; if this method is assigned then
+ * the stack will not do fragmentation.
+ *
+- * @set_retry_limit: Configuration of retry limits (if device needs it)
+- *
+ * @sta_notify: Notifies low level driver about addition or removal
+ * of assocaited station or AP.
+ *
+@@ -1263,8 +1271,6 @@ struct ieee80211_ops {
+ u32 *iv32, u16 *iv16);
+ int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
+ int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
+- int (*set_retry_limit)(struct ieee80211_hw *hw,
+- u32 short_retry, u32 long_retr);
+ void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ enum sta_notify_cmd, struct ieee80211_sta *sta);
+ int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
+--- everything.orig/net/mac80211/ieee80211_i.h 2008-10-10 23:27:46.000000000 +0200
++++ everything/net/mac80211/ieee80211_i.h 2008-10-10 23:31:22.000000000 +0200
+@@ -632,8 +632,6 @@ struct ieee80211_local {
+
+ int rts_threshold;
+ int fragmentation_threshold;
+- int short_retry_limit; /* dot11ShortRetryLimit */
+- int long_retry_limit; /* dot11LongRetryLimit */
+
+ struct crypto_blkcipher *wep_tx_tfm;
+ struct crypto_blkcipher *wep_rx_tfm;
+--- everything.orig/net/mac80211/main.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/net/mac80211/main.c 2008-10-10 23:31:22.000000000 +0200
+@@ -673,8 +673,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(
+
+ local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
+ local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+- local->short_retry_limit = 7;
+- local->long_retry_limit = 4;
++ local->hw.conf.long_frame_max_tx_count = 4;
++ local->hw.conf.short_frame_max_tx_count = 7;
+ local->hw.conf.radio_enabled = true;
+
+ INIT_LIST_HEAD(&local->interfaces);
+--- everything.orig/net/mac80211/wext.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/net/mac80211/wext.c 2008-10-10 23:31:22.000000000 +0200
+@@ -802,21 +802,16 @@ static int ieee80211_ioctl_siwretry(stru
+ (retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
+ return -EINVAL;
+
+- if (retry->flags & IW_RETRY_MAX)
+- local->long_retry_limit = retry->value;
+- else if (retry->flags & IW_RETRY_MIN)
+- local->short_retry_limit = retry->value;
+- else {
+- local->long_retry_limit = retry->value;
+- local->short_retry_limit = retry->value;
++ if (retry->flags & IW_RETRY_MAX) {
++ local->hw.conf.long_frame_max_tx_count = retry->value;
++ } else if (retry->flags & IW_RETRY_MIN) {
++ local->hw.conf.short_frame_max_tx_count = retry->value;
++ } else {
++ local->hw.conf.long_frame_max_tx_count = retry->value;
++ local->hw.conf.short_frame_max_tx_count = retry->value;
+ }
+
+- if (local->ops->set_retry_limit) {
+- return local->ops->set_retry_limit(
+- local_to_hw(local),
+- local->short_retry_limit,
+- local->long_retry_limit);
+- }
++ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
+
+ return 0;
+ }
+@@ -833,14 +828,15 @@ static int ieee80211_ioctl_giwretry(stru
+ /* first return min value, iwconfig will ask max value
+ * later if needed */
+ retry->flags |= IW_RETRY_LIMIT;
+- retry->value = local->short_retry_limit;
+- if (local->long_retry_limit != local->short_retry_limit)
++ retry->value = local->hw.conf.short_frame_max_tx_count;
++ if (local->hw.conf.long_frame_max_tx_count !=
++ local->hw.conf.short_frame_max_tx_count)
+ retry->flags |= IW_RETRY_MIN;
+ return 0;
+ }
+ if (retry->flags & IW_RETRY_MAX) {
+ retry->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+- retry->value = local->long_retry_limit;
++ retry->value = local->hw.conf.long_frame_max_tx_count;
+ }
+
+ return 0;
+--- everything.orig/drivers/net/wireless/ath9k/main.c 2008-10-10 23:27:47.000000000 +0200
++++ everything/drivers/net/wireless/ath9k/main.c 2008-10-10 23:31:23.000000000 +0200
+@@ -1657,7 +1657,6 @@ static struct ieee80211_ops ath9k_ops =
+ .get_tkip_seq = NULL,
+ .set_rts_threshold = NULL,
+ .set_frag_threshold = NULL,
+- .set_retry_limit = NULL,
+ .get_tsf = ath9k_get_tsf,
+ .reset_tsf = ath9k_reset_tsf,
+ .tx_last_beacon = NULL,
+--- everything.orig/drivers/net/wireless/b43/main.c 2008-10-10 23:27:47.000000000 +0200
++++ everything/drivers/net/wireless/b43/main.c 2008-10-10 23:31:23.000000000 +0200
+@@ -3320,6 +3320,22 @@ init_failure:
+ return err;
+ }
+
++/* Write the short and long frame retry limit values. */
++static void b43_set_retry_limits(struct b43_wldev *dev,
++ unsigned int short_retry,
++ unsigned int long_retry)
++{
++ /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
++ * the chip-internal counter. */
++ short_retry = min(short_retry, (unsigned int)0xF);
++ long_retry = min(long_retry, (unsigned int)0xF);
++
++ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
++ short_retry);
++ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
++ long_retry);
++}
++
+ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
+ {
+ struct b43_wl *wl = hw_to_b43_wl(hw);
+@@ -3333,6 +3349,20 @@ static int b43_op_config(struct ieee8021
+
+ mutex_lock(&wl->mutex);
+
++ if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
++ dev = wl->current_dev;
++ if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
++ err = -ENODEV;
++ goto out_unlock_mutex;
++ }
++ b43_set_retry_limits(dev, conf->short_frame_max_tx_count,
++ conf->long_frame_max_tx_count);
++ changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
++ }
++
++ if (!changed)
++ goto out_unlock_mutex;
++
+ /* Switch the band (if necessary). This might change the active core. */
+ err = b43_switch_band(wl, conf->channel);
+ if (err)
+@@ -3860,22 +3890,6 @@ static void b43_imcfglo_timeouts_workaro
+ #endif /* CONFIG_SSB_DRIVER_PCICORE */
+ }
+
+-/* Write the short and long frame retry limit values. */
+-static void b43_set_retry_limits(struct b43_wldev *dev,
+- unsigned int short_retry,
+- unsigned int long_retry)
+-{
+- /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
+- * the chip-internal counter. */
+- short_retry = min(short_retry, (unsigned int)0xF);
+- long_retry = min(long_retry, (unsigned int)0xF);
+-
+- b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT,
+- short_retry);
+- b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT,
+- long_retry);
+-}
+-
+ static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle)
+ {
+ u16 pu_delay;
+@@ -4196,26 +4210,6 @@ static void b43_op_stop(struct ieee80211
+ cancel_work_sync(&(wl->txpower_adjust_work));
+ }
+
+-static int b43_op_set_retry_limit(struct ieee80211_hw *hw,
+- u32 short_retry_limit, u32 long_retry_limit)
+-{
+- struct b43_wl *wl = hw_to_b43_wl(hw);
+- struct b43_wldev *dev;
+- int err = 0;
+-
+- mutex_lock(&wl->mutex);
+- dev = wl->current_dev;
+- if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) {
+- err = -ENODEV;
+- goto out_unlock;
+- }
+- b43_set_retry_limits(dev, short_retry_limit, long_retry_limit);
+-out_unlock:
+- mutex_unlock(&wl->mutex);
+-
+- return err;
+-}
+-
+ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, bool set)
+ {
+@@ -4252,7 +4246,6 @@ static const struct ieee80211_ops b43_hw
+ .get_tx_stats = b43_op_get_tx_stats,
+ .start = b43_op_start,
+ .stop = b43_op_stop,
+- .set_retry_limit = b43_op_set_retry_limit,
+ .set_tim = b43_op_beacon_set_tim,
+ .sta_notify = b43_op_sta_notify,
+ };
+--- everything.orig/drivers/net/wireless/b43legacy/main.c 2008-10-10 23:27:47.000000000 +0200
++++ everything/drivers/net/wireless/b43legacy/main.c 2008-10-10 23:31:23.000000000 +0200
+@@ -2556,6 +2556,20 @@ init_failure:
+ return err;
+ }
+
++/* Write the short and long frame retry limit values. */
++static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
++ unsigned int short_retry,
++ unsigned int long_retry)
++{
++ /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
++ * the chip-internal counter. */
++ short_retry = min(short_retry, (unsigned int)0xF);
++ long_retry = min(long_retry, (unsigned int)0xF);
++
++ b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry);
++ b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
++}
++
+ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
+ u32 changed)
+ {
+@@ -2570,10 +2584,27 @@ static int b43legacy_op_dev_config(struc
+ int err = 0;
+ u32 savedirqs;
+
++ mutex_lock(&wl->mutex);
++ dev = wl->current_dev;
++
++ if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
++ if (unlikely(!dev ||
++ (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED))) {
++ err = -ENODEV;
++ goto out_unlock_mutex;
++ }
++ b43legacy_set_retry_limits(dev,
++ conf->short_frame_max_tx_count,
++ conf->long_frame_max_tx_count);
++ changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
++ }
++
++ if (!changed)
++ goto out_unlock_mutex;
++
+ antenna_tx = B43legacy_ANTENNA_DEFAULT;
+ antenna_rx = B43legacy_ANTENNA_DEFAULT;
+
+- mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ phy = &dev->phy;
+
+@@ -2989,20 +3020,6 @@ static void b43legacy_imcfglo_timeouts_w
+ #endif /* CONFIG_SSB_DRIVER_PCICORE */
+ }
+
+-/* Write the short and long frame retry limit values. */
+-static void b43legacy_set_retry_limits(struct b43legacy_wldev *dev,
+- unsigned int short_retry,
+- unsigned int long_retry)
+-{
+- /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing
+- * the chip-internal counter. */
+- short_retry = min(short_retry, (unsigned int)0xF);
+- long_retry = min(long_retry, (unsigned int)0xF);
+-
+- b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0006, short_retry);
+- b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS, 0x0007, long_retry);
+-}
+-
+ static void b43legacy_set_synth_pu_delay(struct b43legacy_wldev *dev,
+ bool idle) {
+ u16 pu_delay = 1050;
+@@ -3367,28 +3384,6 @@ static void b43legacy_op_stop(struct iee
+ mutex_unlock(&wl->mutex);
+ }
+
+-static int b43legacy_op_set_retry_limit(struct ieee80211_hw *hw,
+- u32 short_retry_limit,
+- u32 long_retry_limit)
+-{
+- struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
+- struct b43legacy_wldev *dev;
+- int err = 0;
+-
+- mutex_lock(&wl->mutex);
+- dev = wl->current_dev;
+- if (unlikely(!dev ||
+- (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED))) {
+- err = -ENODEV;
+- goto out_unlock;
+- }
+- b43legacy_set_retry_limits(dev, short_retry_limit, long_retry_limit);
+-out_unlock:
+- mutex_unlock(&wl->mutex);
+-
+- return err;
+-}
+-
+ static int b43legacy_op_beacon_set_tim(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, bool set)
+ {
+@@ -3414,7 +3409,6 @@ static const struct ieee80211_ops b43leg
+ .get_tx_stats = b43legacy_op_get_tx_stats,
+ .start = b43legacy_op_start,
+ .stop = b43legacy_op_stop,
+- .set_retry_limit = b43legacy_op_set_retry_limit,
+ .set_tim = b43legacy_op_beacon_set_tim,
+ };
+
+--- everything.orig/drivers/net/wireless/rt2x00/rt2400pci.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt2400pci.c 2008-10-10 23:27:48.000000000 +0200
+@@ -1576,7 +1576,6 @@ static const struct ieee80211_ops rt2400
+ .config_interface = rt2x00mac_config_interface,
+ .configure_filter = rt2x00mac_configure_filter,
+ .get_stats = rt2x00mac_get_stats,
+- .set_retry_limit = rt2400pci_set_retry_limit,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2400pci_conf_tx,
+ .get_tx_stats = rt2x00mac_get_tx_stats,
+@@ -1605,6 +1604,7 @@ static const struct rt2x00lib_ops rt2400
+ .config_intf = rt2400pci_config_intf,
+ .config_erp = rt2400pci_config_erp,
+ .config = rt2400pci_config,
++ .set_retry_limit = rt2400pci_set_retry_limit,
+ };
+
+ static const struct data_queue_desc rt2400pci_queue_rx = {
+--- everything.orig/drivers/net/wireless/rt2x00/rt2x00.h 2008-10-10 23:27:47.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt2x00.h 2008-10-10 23:27:48.000000000 +0200
+@@ -599,6 +599,9 @@ struct rt2x00lib_ops {
+ #define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 )
+ #define CONFIG_UPDATE_BEACON_INT ( 1 << 6 )
+ #define CONFIG_UPDATE_ALL 0xffff
++
++ int (*set_retry_limit) (struct ieee80211_hw *hw,
++ u32 short_limit, u32 long_limit);
+ };
+
+ /*
+--- everything.orig/drivers/net/wireless/rt2x00/rt2500pci.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt2500pci.c 2008-10-10 23:27:48.000000000 +0200
+@@ -1877,7 +1877,6 @@ static const struct ieee80211_ops rt2500
+ .config_interface = rt2x00mac_config_interface,
+ .configure_filter = rt2x00mac_configure_filter,
+ .get_stats = rt2x00mac_get_stats,
+- .set_retry_limit = rt2500pci_set_retry_limit,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2x00mac_conf_tx,
+ .get_tx_stats = rt2x00mac_get_tx_stats,
+@@ -1906,6 +1905,7 @@ static const struct rt2x00lib_ops rt2500
+ .config_intf = rt2500pci_config_intf,
+ .config_erp = rt2500pci_config_erp,
+ .config = rt2500pci_config,
++ .set_retry_limit = rt2500pci_set_retry_limit,
+ };
+
+ static const struct data_queue_desc rt2500pci_queue_rx = {
+--- everything.orig/drivers/net/wireless/rt2x00/rt61pci.c 2008-10-10 23:27:47.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt61pci.c 2008-10-10 23:27:48.000000000 +0200
+@@ -2726,7 +2726,6 @@ static const struct ieee80211_ops rt61pc
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
+ .get_stats = rt2x00mac_get_stats,
+- .set_retry_limit = rt61pci_set_retry_limit,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt61pci_conf_tx,
+ .get_tx_stats = rt2x00mac_get_tx_stats,
+@@ -2759,6 +2758,7 @@ static const struct rt2x00lib_ops rt61pc
+ .config_intf = rt61pci_config_intf,
+ .config_erp = rt61pci_config_erp,
+ .config = rt61pci_config,
++ .set_retry_limit = rt61pci_set_retry_limit,
+ };
+
+ static const struct data_queue_desc rt61pci_queue_rx = {
+--- everything.orig/drivers/net/wireless/rt2x00/rt73usb.c 2008-10-10 23:27:47.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt73usb.c 2008-10-10 23:27:48.000000000 +0200
+@@ -2317,7 +2317,6 @@ static const struct ieee80211_ops rt73us
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
+ .get_stats = rt2x00mac_get_stats,
+- .set_retry_limit = rt73usb_set_retry_limit,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt73usb_conf_tx,
+ .get_tx_stats = rt2x00mac_get_tx_stats,
+@@ -2349,6 +2348,7 @@ static const struct rt2x00lib_ops rt73us
+ .config_intf = rt73usb_config_intf,
+ .config_erp = rt73usb_config_erp,
+ .config = rt73usb_config,
++ .set_retry_limit = rt73usb_set_retry_limit,
+ };
+
+ static const struct data_queue_desc rt73usb_queue_rx = {
+--- everything.orig/drivers/net/wireless/rt2x00/rt2x00mac.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/drivers/net/wireless/rt2x00/rt2x00mac.c 2008-10-10 23:31:23.000000000 +0200
+@@ -349,6 +349,15 @@ int rt2x00mac_config(struct ieee80211_hw
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return 0;
+
++ if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
++ rt2x00dev->ops->lib->set_retry_limit(hw,
++ conf->short_frame_max_tx_count,
++ conf->long_frame_max_tx_count);
++ }
++ changed &= ~IEEE80211_CONF_CHANGE_RETRY_LIMITS;
++ if (!changed)
++ return 0;
++
+ /*
+ * Only change device state when the radio is enabled. It does not
+ * matter what parameters we have configured when the radio is disabled
+--- everything.orig/net/mac80211/debugfs.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/net/mac80211/debugfs.c 2008-10-10 23:27:48.000000000 +0200
+@@ -52,9 +52,9 @@ DEBUGFS_READONLY_FILE(rts_threshold, 20,
+ DEBUGFS_READONLY_FILE(fragmentation_threshold, 20, "%d",
+ local->fragmentation_threshold);
+ DEBUGFS_READONLY_FILE(short_retry_limit, 20, "%d",
+- local->short_retry_limit);
++ local->hw.conf.short_frame_max_tx_count);
+ DEBUGFS_READONLY_FILE(long_retry_limit, 20, "%d",
+- local->long_retry_limit);
++ local->hw.conf.long_frame_max_tx_count);
+ DEBUGFS_READONLY_FILE(total_ps_buffered, 20, "%d",
+ local->total_ps_buffered);
+ DEBUGFS_READONLY_FILE(wep_iv, 20, "%#06x",
+--- everything.orig/net/mac80211/tx.c 2008-10-10 23:27:46.000000000 +0200
++++ everything/net/mac80211/tx.c 2008-10-10 23:31:22.000000000 +0200
+@@ -507,10 +507,10 @@ ieee80211_tx_h_misc(struct ieee80211_tx_
+ info->flags |=
+ IEEE80211_TX_CTL_LONG_RETRY_LIMIT;
+ info->control.retry_limit =
+- tx->local->long_retry_limit;
++ tx->local->hw.conf.long_frame_max_tx_count - 1;
+ } else {
+ info->control.retry_limit =
+- tx->local->short_retry_limit;
++ tx->local->hw.conf.short_frame_max_tx_count - 1;
+ }
+ } else {
+ info->control.retry_limit = 1;
--- /dev/null
+Subject: mac80211/drivers: rewrite the rate control API
+
+So after the previous changes we were still unhappy with how
+convoluted the API is and decided to make things simpler for
+everybody. This completely changes the rate control API, now
+taking into account 802.11n with MCS rates and more control,
+most drivers don't support that though.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
+---
+ drivers/net/wireless/adm8211.c | 21 -
+ drivers/net/wireless/ath5k/base.c | 34 +-
+ drivers/net/wireless/ath9k/main.c | 18 -
+ drivers/net/wireless/ath9k/rc.c | 40 +--
+ drivers/net/wireless/ath9k/xmit.c | 28 +-
+ drivers/net/wireless/b43/dma.c | 4
+ drivers/net/wireless/b43/main.c | 2
+ drivers/net/wireless/b43/pio.c | 4
+ drivers/net/wireless/b43/xmit.c | 60 +++-
+ drivers/net/wireless/b43/xmit.h | 5
+ drivers/net/wireless/b43legacy/dma.c | 46 ++-
+ drivers/net/wireless/b43legacy/main.c | 2
+ drivers/net/wireless/b43legacy/pio.c | 31 ++
+ drivers/net/wireless/b43legacy/xmit.c | 26 +-
+ drivers/net/wireless/b43legacy/xmit.h | 2
+ drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 57 +---
+ drivers/net/wireless/iwlwifi/iwl-3945.c | 62 ++++-
+ drivers/net/wireless/iwlwifi/iwl-3945.h | 2
+ drivers/net/wireless/iwlwifi/iwl-4965.c | 8
+ drivers/net/wireless/iwlwifi/iwl-5000.c | 8
+ drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 37 +-
+ drivers/net/wireless/iwlwifi/iwl-core.c | 19 -
+ drivers/net/wireless/iwlwifi/iwl3945-base.c | 5
+ drivers/net/wireless/libertas_tf/main.c | 4
+ drivers/net/wireless/mac80211_hwsim.c | 12
+ drivers/net/wireless/p54/p54common.c | 16 -
+ drivers/net/wireless/rt2x00/rt2x00dev.c | 11
+ drivers/net/wireless/rt2x00/rt2x00mac.c | 14 -
+ drivers/net/wireless/rt2x00/rt2x00queue.c | 11
+ drivers/net/wireless/rtl8180_dev.c | 28 +-
+ drivers/net/wireless/rtl8187_dev.c | 10
+ drivers/net/wireless/zd1211rw/zd_mac.c | 28 +-
+ include/net/mac80211.h | 206 +++++++++-------
+ net/mac80211/ieee80211_i.h | 8
+ net/mac80211/main.c | 54 +++-
+ net/mac80211/mesh_hwmp.c | 6
+ net/mac80211/rate.c | 50 +---
+ net/mac80211/rate.h | 5
+ net/mac80211/rc80211_minstrel.c | 72 ++---
+ net/mac80211/rc80211_pid.h | 1
+ net/mac80211/rc80211_pid_algo.c | 26 +-
+ net/mac80211/rc80211_pid_debugfs.c | 5
+ net/mac80211/sta_info.h | 4
+ net/mac80211/tx.c | 347 +++++++++++-----------------
+ net/mac80211/wext.c | 4
+ 45 files changed, 781 insertions(+), 662 deletions(-)
+
+--- a/include/net/mac80211.h
++++ b/include/net/mac80211.h
+@@ -222,29 +222,24 @@ struct ieee80211_bss_conf {
+ * These flags are used with the @flags member of &ieee80211_tx_info.
+ *
+ * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
+- * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame
+- * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
+- * for combined 802.11g / 802.11b networks)
++ * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
++ * number to this frame, taking care of not overwriting the fragment
++ * number and increasing the sequence number only when the
++ * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly
++ * assign sequence numbers to QoS-data frames but cannot do so correctly
++ * for non-QoS-data and management frames because beacons need them from
++ * that counter as well and mac80211 cannot guarantee proper sequencing.
++ * If this flag is set, the driver should instruct the hardware to
++ * assign a sequence number to the frame or assign one itself. Cf. IEEE
++ * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
++ * beacons always be clear for frames without a sequence number field.
+ * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack
+- * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD
+ * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination
+ * station
+- * @IEEE80211_TX_CTL_REQUEUE: TBD
+ * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame
+- * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD
+- * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the
+- * through set_retry_limit configured long retry value
+ * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU
+- * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
+- * of streams when this flag is on can be extracted from antenna_sel_tx,
+- * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n
+- * antennas marked use MIMO_n.
+- * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame
+- * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
+- * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
+- * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval
+- * @IEEE80211_TX_CTL_INJECTED: TBD
++ * @IEEE80211_TX_CTL_INJECTED: Frame was injected, internal to mac80211.
+ * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted
+ * because the destination STA was in powersave mode.
+ * @IEEE80211_TX_STAT_ACK: Frame was acknowledged
+@@ -252,42 +247,41 @@ struct ieee80211_bss_conf {
+ * is for the whole aggregation.
+ * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned,
+ * so consider using block ack request (BAR).
+- * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
+- * number to this frame, taking care of not overwriting the fragment
+- * number and increasing the sequence number only when the
+- * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly
+- * assign sequence numbers to QoS-data frames but cannot do so correctly
+- * for non-QoS-data and management frames because beacons need them from
+- * that counter as well and mac80211 cannot guarantee proper sequencing.
+- * If this flag is set, the driver should instruct the hardware to
+- * assign a sequence number to the frame or assign one itself. Cf. IEEE
+- * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for
+- * beacons always be clear for frames without a sequence number field.
++ * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be
++ * set by rate control algorithms to indicate probe rate, will
++ * be cleared for fragmented frames (except on the last fragment)
++ * @IEEE80211_TX_CTL_REQUEUE: REMOVE THIS
+ */
+ enum mac80211_tx_control_flags {
+ IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0),
+- IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2),
+- IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3),
+- IEEE80211_TX_CTL_NO_ACK = BIT(4),
+- IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5),
+- IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6),
+- IEEE80211_TX_CTL_REQUEUE = BIT(7),
+- IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8),
+- IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9),
+- IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10),
+- IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12),
+- IEEE80211_TX_CTL_AMPDU = BIT(13),
+- IEEE80211_TX_CTL_OFDM_HT = BIT(14),
+- IEEE80211_TX_CTL_GREEN_FIELD = BIT(15),
+- IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16),
+- IEEE80211_TX_CTL_DUP_DATA = BIT(17),
+- IEEE80211_TX_CTL_SHORT_GI = BIT(18),
+- IEEE80211_TX_CTL_INJECTED = BIT(19),
+- IEEE80211_TX_STAT_TX_FILTERED = BIT(20),
+- IEEE80211_TX_STAT_ACK = BIT(21),
+- IEEE80211_TX_STAT_AMPDU = BIT(22),
+- IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23),
+- IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24),
++ IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(1),
++ IEEE80211_TX_CTL_NO_ACK = BIT(2),
++ IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(3),
++ IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(4),
++ IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(5),
++ IEEE80211_TX_CTL_AMPDU = BIT(6),
++ IEEE80211_TX_CTL_INJECTED = BIT(7),
++ IEEE80211_TX_STAT_TX_FILTERED = BIT(8),
++ IEEE80211_TX_STAT_ACK = BIT(9),
++ IEEE80211_TX_STAT_AMPDU = BIT(10),
++ IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
++ IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
++
++ /* XXX: remove this */
++ IEEE80211_TX_CTL_REQUEUE = BIT(13),
++};
++
++enum mac80211_rate_control_flags {
++ IEEE80211_TX_RC_USE_RTS_CTS = BIT(0),
++ IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1),
++ IEEE80211_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
++
++ /* rate index is an MCS rate number instead of an index */
++ IEEE80211_TX_RC_MCS = BIT(3),
++ IEEE80211_TX_RC_GREEN_FIELD = BIT(4),
++ IEEE80211_TX_RC_40_MHZ_WIDTH = BIT(5),
++ IEEE80211_TX_RC_DUP_DATA = BIT(6),
++ IEEE80211_TX_RC_SHORT_GI = BIT(7),
+ };
+
+
+@@ -296,18 +290,26 @@ enum mac80211_tx_control_flags {
+ #define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \
+ (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *))
+
+-/* maximum number of alternate rate retry stages */
+-#define IEEE80211_TX_MAX_ALTRATE 3
++/* maximum number of rate stages */
++#define IEEE80211_TX_MAX_RATES 4
+
+ /**
+- * struct ieee80211_tx_altrate - alternate rate selection/status
++ * struct ieee80211_tx_rate - rate selection/status
+ *
+- * @rate_idx: rate index to attempt to send with
++ * @idx: rate index to attempt to send with
++ * @flags: rate control flags (&enum mac80211_rate_control_flags)
+ * @limit: number of retries before fallback
++ *
++ * A value of -1 for @idx indicates an invalid rate and, if used
++ * in an array of retry rates, that no more rates should be tried.
++ *
++ * When used for transmit status reporting, the driver should
++ * always report the rate along with the flags it used.
+ */
+-struct ieee80211_tx_altrate {
+- s8 rate_idx;
+- u8 limit;
++struct ieee80211_tx_rate {
++ s8 idx;
++ u8 count;
++ u8 flags;
+ };
+
+ /**
+@@ -322,15 +324,12 @@ struct ieee80211_tx_altrate {
+ * it may be NULL.
+ *
+ * @flags: transmit info flags, defined above
+- * @band: TBD
+- * @tx_rate_idx: TBD
++ * @band: the band to transmit on (use for checking for races)
+ * @antenna_sel_tx: antenna to use, 0 for automatic diversity
+ * @control: union for control data
+ * @status: union for status data
+ * @driver_data: array of driver_data pointers
+ * @retry_count: number of retries
+- * @excessive_retries: set to 1 if the frame was retried many times
+- * but not acknowledged
+ * @ampdu_ack_len: number of aggregated frames.
+ * relevant only if IEEE80211_TX_STATUS_AMPDU was set.
+ * @ampdu_ack_map: block ack bit map for the aggregation.
+@@ -341,28 +340,28 @@ struct ieee80211_tx_info {
+ /* common information */
+ u32 flags;
+ u8 band;
+- s8 tx_rate_idx;
++
+ u8 antenna_sel_tx;
+
+- /* 1 byte hole */
++ /* 2 byte hole */
+
+ union {
+ struct {
++ union {
++ struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
++ /* we need the jiffies only before rate control */
++ unsigned long jiffies;
++ };
++ s8 rts_cts_rate_idx;
+ /* NB: vif can be NULL for injected frames */
+ struct ieee80211_vif *vif;
+ struct ieee80211_key_conf *hw_key;
+ struct ieee80211_sta *sta;
+- unsigned long jiffies;
+- s8 rts_cts_rate_idx;
+- u8 retry_limit;
+- struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE];
+ } control;
+ struct {
++ struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
+ u64 ampdu_ack_map;
+ int ack_signal;
+- struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1];
+- u8 retry_count;
+- bool excessive_retries;
+ u8 ampdu_ack_len;
+ } status;
+ void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS];
+@@ -374,6 +373,22 @@ static inline struct ieee80211_tx_info *
+ return (struct ieee80211_tx_info *)skb->cb;
+ }
+
++static inline void
++ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
++{
++ int i;
++
++ BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, status.rates) !=
++ offsetof(struct ieee80211_tx_info, control.rates));
++ /* clear the rate counts */
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
++ info->status.rates[i].count = 0;
++
++ memset(&info->status.ampdu_ack_map, 0,
++ sizeof(struct ieee80211_tx_info) -
++ offsetof(struct ieee80211_tx_info, status.ampdu_ack_map));
++}
++
+
+ /**
+ * enum mac80211_rx_flags - receive flags
+@@ -875,8 +890,8 @@ enum ieee80211_hw_flags {
+ * @sta_data_size: size (in bytes) of the drv_priv data area
+ * within &struct ieee80211_sta.
+ *
+- * @max_altrates: maximum number of alternate rate retry stages
+- * @max_altrate_tries: maximum number of tries for each stage
++ * @max_rates: maximum number of alternate rate retry stages
++ * @max_rate_tries: maximum number of tries for each stage
+ */
+ struct ieee80211_hw {
+ struct ieee80211_conf conf;
+@@ -893,8 +908,8 @@ struct ieee80211_hw {
+ u16 ampdu_queues;
+ u16 max_listen_interval;
+ s8 max_signal;
+- u8 max_altrates;
+- u8 max_altrate_tries;
++ u8 max_rates;
++ u8 max_rate_tries;
+ };
+
+ /**
+@@ -933,9 +948,9 @@ static inline struct ieee80211_rate *
+ ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
+ const struct ieee80211_tx_info *c)
+ {
+- if (WARN_ON(c->tx_rate_idx < 0))
++ if (WARN_ON(c->control.rates[0].idx < 0))
+ return NULL;
+- return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx];
++ return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx];
+ }
+
+ static inline struct ieee80211_rate *
+@@ -951,9 +966,9 @@ static inline struct ieee80211_rate *
+ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
+ const struct ieee80211_tx_info *c, int idx)
+ {
+- if (c->control.retries[idx].rate_idx < 0)
++ if (c->control.rates[idx + 1].idx < 0)
+ return NULL;
+- return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx];
++ return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[idx + 1].idx];
+ }
+
+ /**
+@@ -1847,17 +1862,28 @@ struct ieee80211_sta *ieee80211_find_sta
+
+
+ /* Rate control API */
++
+ /**
+- * struct rate_selection - rate information for/from rate control algorithms
++ * struct ieee80211_tx_rate_control - rate control information for/from RC algo
+ *
+- * @rate_idx: selected transmission rate index
+- * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used
+- * @probe_idx: rate for probing (or -1)
+- * @max_rate_idx: maximum rate index that can be used, this is
+- * input to the algorithm and will be enforced
+- */
+-struct rate_selection {
+- s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx;
++ * @sband: The band this frame is being transmitted on.
++ * @bss_conf: the current BSS configuration
++ * @reported_rate: The rate control algorithm can fill this in to indicate
++ * which rate should be reported to userspace as the current rate and
++ * used for rate calculations in the mesh network.
++ * @rts: whether RTS will be used for this frame because it is longer than the
++ * RTS threshold
++ * @short_preamble: whether mac80211 will request short-preamble transmission
++ * if the selected rate supports it
++ * @max_rate_idx: user-requested maximum rate (not MCS for now)
++ */
++struct ieee80211_tx_rate_control {
++ struct ieee80211_supported_band *sband;
++ struct ieee80211_bss_conf *bss_conf;
++ struct sk_buff *skb;
++ struct ieee80211_tx_rate reported_rate;
++ bool rts, short_preamble;
++ u8 max_rate_idx;
+ };
+
+ struct rate_control_ops {
+@@ -1876,10 +1902,8 @@ struct rate_control_ops {
+ void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *priv_sta,
+ struct sk_buff *skb);
+- void (*get_rate)(void *priv, struct ieee80211_supported_band *sband,
+- struct ieee80211_sta *sta, void *priv_sta,
+- struct sk_buff *skb,
+- struct rate_selection *sel);
++ void (*get_rate)(void *priv, struct ieee80211_sta *sta, void *priv_sta,
++ struct ieee80211_tx_rate_control *txrc);
+
+ void (*add_sta_debugfs)(void *priv, void *priv_sta,
+ struct dentry *dir);
+--- a/net/mac80211/main.c
++++ b/net/mac80211/main.c
+@@ -41,6 +41,8 @@
+ */
+ struct ieee80211_tx_status_rtap_hdr {
+ struct ieee80211_radiotap_header hdr;
++ u8 rate;
++ u8 padding_for_rate;
+ __le16 tx_flags;
+ u8 data_retries;
+ } __attribute__ ((packed));
+@@ -463,13 +465,28 @@ void ieee80211_tx_status(struct ieee8021
+ struct ieee80211_sub_if_data *sdata;
+ struct net_device *prev_dev = NULL;
+ struct sta_info *sta;
++ int retry_count = -1, i;
++
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
++ /* the HW cannot have attempted that rate */
++ if (i >= hw->max_rates) {
++ info->status.rates[i].idx = -1;
++ info->status.rates[i].count = 0;
++ }
++
++ retry_count += info->status.rates[i].count;
++ }
++ if (retry_count < 0)
++ retry_count = 0;
+
+ rcu_read_lock();
+
++ sband = local->hw.wiphy->bands[info->band];
++
+ sta = sta_info_get(local, hdr->addr1);
+
+ if (sta) {
+- if (info->status.excessive_retries &&
++ if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
+ test_sta_flags(sta, WLAN_STA_PS)) {
+ /*
+ * The STA is in power save mode, so assume
+@@ -500,12 +517,11 @@ void ieee80211_tx_status(struct ieee8021
+ rcu_read_unlock();
+ return;
+ } else {
+- if (info->status.excessive_retries)
++ if (!(info->flags & IEEE80211_TX_STAT_ACK))
+ sta->tx_retry_failed++;
+- sta->tx_retry_count += info->status.retry_count;
++ sta->tx_retry_count += retry_count;
+ }
+
+- sband = local->hw.wiphy->bands[info->band];
+ rate_control_tx_status(local, sband, sta, skb);
+ }
+
+@@ -526,9 +542,9 @@ void ieee80211_tx_status(struct ieee8021
+ local->dot11TransmittedFrameCount++;
+ if (is_multicast_ether_addr(hdr->addr1))
+ local->dot11MulticastTransmittedFrameCount++;
+- if (info->status.retry_count > 0)
++ if (retry_count > 0)
+ local->dot11RetryCount++;
+- if (info->status.retry_count > 1)
++ if (retry_count > 1)
+ local->dot11MultipleRetryCount++;
+ }
+
+@@ -572,19 +588,30 @@ void ieee80211_tx_status(struct ieee8021
+ rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
+ rthdr->hdr.it_present =
+ cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
+- (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
++ (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
++ (1 << IEEE80211_RADIOTAP_RATE));
+
+ if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
+ !is_multicast_ether_addr(hdr->addr1))
+ rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
+
+- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) &&
+- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
++ /*
++ * XXX: Once radiotap gets the bitmap reset thing the vendor
++ * extensions proposal contains, we can actually report
++ * the whole set of tries we did.
++ */
++ if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
++ (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
+ rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
+- else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
++ else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
++ if (info->status.rates[0].idx >= 0 &&
++ !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
++ rthdr->rate = sband->bitrates[
++ info->status.rates[0].idx].bitrate / 5;
+
+- rthdr->data_retries = info->status.retry_count;
++ /* for now report the total retry_count */
++ rthdr->data_retries = retry_count;
+
+ /* XXX: is this sufficient for BPF? */
+ skb_set_mac_header(skb, 0);
+@@ -669,8 +696,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(
+ BUG_ON(!ops->configure_filter);
+ local->ops = ops;
+
+- local->hw.queues = 1; /* default */
+-
++ /* set up some defaults */
++ local->hw.queues = 1;
++ local->hw.max_rates = 1;
+ local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
+ local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ local->hw.conf.long_frame_max_tx_count = 4;
+--- a/net/mac80211/tx.c
++++ b/net/mac80211/tx.c
+@@ -46,13 +46,20 @@ static __le16 ieee80211_duration(struct
+ struct ieee80211_local *local = tx->local;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_hdr *hdr;
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
++
++ /* assume HW handles this */
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
++ return 0;
++
++ /* uh huh? */
++ if (WARN_ON(info->control.rates[0].idx < 0))
++ return 0;
+
+ sband = local->hw.wiphy->bands[tx->channel->band];
+- txrate = &sband->bitrates[tx->rate_idx];
++ txrate = &sband->bitrates[info->control.rates[0].idx];
+
+- erp = 0;
+- if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
+- erp = txrate->flags & IEEE80211_RATE_ERP_G;
++ erp = txrate->flags & IEEE80211_RATE_ERP_G;
+
+ /*
+ * data and mgmt (except PS Poll):
+@@ -439,140 +446,123 @@ ieee80211_tx_h_select_key(struct ieee802
+ static ieee80211_tx_result debug_noinline
+ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
+ {
+- struct rate_selection rsel;
+- struct ieee80211_supported_band *sband;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
++ struct ieee80211_hdr *hdr = (void *)tx->skb->data;
++ struct ieee80211_supported_band *sband;
++ struct ieee80211_rate *rate;
++ int i, len;
++ bool inval = false, rts = false, short_preamble = false;
++ struct ieee80211_tx_rate_control txrc;
+
+- sband = tx->local->hw.wiphy->bands[tx->channel->band];
++ memset(&txrc, 0, sizeof(txrc));
+
+- if (likely(tx->rate_idx < 0)) {
+- rate_control_get_rate(tx->sdata, sband, tx->sta,
+- tx->skb, &rsel);
+- if (tx->sta)
+- tx->sta->last_txrate_idx = rsel.rate_idx;
+- tx->rate_idx = rsel.rate_idx;
+- if (unlikely(rsel.probe_idx >= 0)) {
+- info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+- tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
+- info->control.retries[0].rate_idx = tx->rate_idx;
+- info->control.retries[0].limit = tx->local->hw.max_altrate_tries;
+- tx->rate_idx = rsel.probe_idx;
+- } else if (info->control.retries[0].limit == 0)
+- info->control.retries[0].rate_idx = -1;
++ sband = tx->local->hw.wiphy->bands[tx->channel->band];
+
+- if (unlikely(tx->rate_idx < 0))
+- return TX_DROP;
+- } else
+- info->control.retries[0].rate_idx = -1;
++ len = min_t(int, tx->skb->len + FCS_LEN,
++ tx->local->fragmentation_threshold);
+
+- if (tx->sdata->vif.bss_conf.use_cts_prot &&
+- (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) {
+- tx->last_frag_rate_idx = tx->rate_idx;
+- if (rsel.probe_idx >= 0)
+- tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG;
+- else
+- tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
+- tx->rate_idx = rsel.nonerp_idx;
+- info->tx_rate_idx = rsel.nonerp_idx;
+- info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+- } else {
+- tx->last_frag_rate_idx = tx->rate_idx;
+- info->tx_rate_idx = tx->rate_idx;
++ /* set up the tx rate control struct we give the RC algo */
++ txrc.sband = sband;
++ txrc.bss_conf = &tx->sdata->vif.bss_conf;
++ txrc.skb = tx->skb;
++ txrc.reported_rate.idx = -1;
++ txrc.max_rate_idx = tx->sdata->max_ratectrl_rateidx;
++
++ /* set up RTS protection if desired */
++ if (tx->local->rts_threshold < IEEE80211_MAX_RTS_THRESHOLD &&
++ len > tx->local->rts_threshold) {
++ txrc.rts = rts = true;
+ }
+- info->tx_rate_idx = tx->rate_idx;
+
+- return TX_CONTINUE;
+-}
++ /* XXX: Is this really the right thing to check? */
++ if (ieee80211_is_data(hdr->frame_control) &&
++ tx->sdata->vif.bss_conf.use_short_preamble &&
++ (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE)))
++ txrc.short_preamble = short_preamble = true;
+
+-static ieee80211_tx_result debug_noinline
+-ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
+-{
+- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
+- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
+- struct ieee80211_supported_band *sband;
+
+- sband = tx->local->hw.wiphy->bands[tx->channel->band];
++ rate_control_get_rate(tx->sdata, tx->sta, &txrc);
++
++ if (unlikely(info->control.rates[0].idx < 0))
++ return TX_DROP;
++
++ if (txrc.reported_rate.idx < 0)
++ txrc.reported_rate = info->control.rates[0];
+
+ if (tx->sta)
+- info->control.sta = &tx->sta->sta;
++ tx->sta->last_tx_rate = txrc.reported_rate;
+
+- if (!info->control.retry_limit) {
+- if (!is_multicast_ether_addr(hdr->addr1)) {
+- int len = min_t(int, tx->skb->len + FCS_LEN,
+- tx->local->fragmentation_threshold);
+- if (len > tx->local->rts_threshold
+- && tx->local->rts_threshold <
+- IEEE80211_MAX_RTS_THRESHOLD) {
+- info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS;
+- info->flags |=
+- IEEE80211_TX_CTL_LONG_RETRY_LIMIT;
+- info->control.retry_limit =
+- tx->local->hw.conf.long_frame_max_tx_count - 1;
+- } else {
+- info->control.retry_limit =
+- tx->local->hw.conf.short_frame_max_tx_count - 1;
+- }
+- } else {
+- info->control.retry_limit = 1;
+- }
+- }
++ if (unlikely(!info->control.rates[0].count))
++ info->control.rates[0].count = 1;
+
+- if (tx->flags & IEEE80211_TX_FRAGMENTED) {
+- /* Do not use multiple retry rates when sending fragmented
+- * frames.
+- * TODO: The last fragment could still use multiple retry
+- * rates. */
+- info->control.retries[0].rate_idx = -1;
+- }
+-
+- /* Use CTS protection for unicast frames sent using extended rates if
+- * there are associated non-ERP stations and RTS/CTS is not configured
+- * for the frame. */
+- if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) &&
+- (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) &&
+- (tx->flags & IEEE80211_TX_UNICAST) &&
+- tx->sdata->vif.bss_conf.use_cts_prot &&
+- !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS))
+- info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT;
+-
+- /* Transmit data frames using short preambles if the driver supports
+- * short preambles at the selected rate and short preambles are
+- * available on the network at the current point in time. */
+- if (ieee80211_is_data(hdr->frame_control) &&
+- (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) &&
+- tx->sdata->vif.bss_conf.use_short_preamble &&
+- (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) {
+- info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
++ if (is_multicast_ether_addr(hdr->addr1)) {
++ /*
++ * XXX: verify the rate is in the basic rateset
++ */
++ return TX_CONTINUE;
+ }
+
+- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
+- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
+- struct ieee80211_rate *rate;
+- s8 baserate = -1;
+- int idx;
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
++ /*
++ * make sure there's no valid rate following
++ * an invalid one, just in case drivers don't
++ * take the API seriously to stop at -1.
++ */
++ if (inval) {
++ info->control.rates[i].idx = -1;
++ continue;
++ }
++ if (info->control.rates[i].idx < 0) {
++ inval = true;
++ continue;
++ }
+
+- /* Do not use multiple retry rates when using RTS/CTS */
+- info->control.retries[0].rate_idx = -1;
++ /*
++ * For now assume MCS is already set up correctly, this
++ * needs to be fixed.
++ */
++ if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS) {
++ WARN_ON(info->control.rates[i].idx > 76);
++ continue;
++ }
+
+- /* Use min(data rate, max base rate) as CTS/RTS rate */
+- rate = &sband->bitrates[tx->rate_idx];
++ /* set up RTS protection if desired */
++ if (rts) {
++ info->control.rates[i].flags |=
++ IEEE80211_TX_RC_USE_RTS_CTS;
++ rts = true;
++ }
+
+- for (idx = 0; idx < sband->n_bitrates; idx++) {
+- if (sband->bitrates[idx].bitrate > rate->bitrate)
+- continue;
+- if (tx->sdata->vif.bss_conf.basic_rates & BIT(idx) &&
+- (baserate < 0 ||
+- (sband->bitrates[baserate].bitrate
+- < sband->bitrates[idx].bitrate)))
+- baserate = idx;
++ /* RC is busted */
++ if (WARN_ON(info->control.rates[i].idx >=
++ sband->n_bitrates)) {
++ info->control.rates[i].idx = -1;
++ continue;
+ }
+
+- if (baserate >= 0)
+- info->control.rts_cts_rate_idx = baserate;
+- else
+- info->control.rts_cts_rate_idx = 0;
++ rate = &sband->bitrates[info->control.rates[i].idx];
++
++ /* set up short preamble */
++ if (short_preamble &&
++ rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
++ info->control.rates[i].flags |=
++ IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
++
++ /* set up G protection */
++ if (!rts && tx->sdata->vif.bss_conf.use_cts_prot &&
++ rate->flags & IEEE80211_RATE_ERP_G)
++ info->control.rates[i].flags |=
++ IEEE80211_TX_RC_USE_CTS_PROTECT;
+ }
+
++ return TX_CONTINUE;
++}
++
++static ieee80211_tx_result debug_noinline
++ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
++{
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
++
+ if (tx->sta)
+ info->control.sta = &tx->sta->sta;
+
+@@ -680,6 +670,7 @@ ieee80211_tx_h_fragment(struct ieee80211
+ left = payload_len - per_fragm;
+ for (i = 0; i < num_fragm - 1; i++) {
+ struct ieee80211_hdr *fhdr;
++ struct ieee80211_tx_info *info;
+ size_t copylen;
+
+ if (left <= 0)
+@@ -694,20 +685,44 @@ ieee80211_tx_h_fragment(struct ieee80211
+ IEEE80211_ENCRYPT_TAILROOM);
+ if (!frag)
+ goto fail;
++
+ /* Make sure that all fragments use the same priority so
+ * that they end up using the same TX queue */
+ frag->priority = first->priority;
++
+ skb_reserve(frag, tx->local->tx_headroom +
+ IEEE80211_ENCRYPT_HEADROOM);
++
++ /* copy TX information */
++ info = IEEE80211_SKB_CB(frag);
++ memcpy(info, first->cb, sizeof(frag->cb));
++
++ /* copy/fill in 802.11 header */
+ fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen);
+ memcpy(fhdr, first->data, hdrlen);
+- if (i == num_fragm - 2)
+- fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
+ fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG));
++
++ if (i == num_fragm - 2) {
++ /* clear MOREFRAGS bit for the last fragment */
++ fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
++ } else {
++ /*
++ * No multi-rate retries for fragmented frames, that
++ * would completely throw off the NAV at other STAs.
++ */
++ info->control.rates[1].idx = -1;
++ info->control.rates[2].idx = -1;
++ info->control.rates[3].idx = -1;
++ BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4);
++ info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
++ }
++
++ /* copy data */
+ copylen = left > per_fragm ? per_fragm : left;
+ memcpy(skb_put(frag, copylen), pos, copylen);
+- memcpy(frag->cb, first->cb, sizeof(frag->cb));
++
+ skb_copy_queue_mapping(frag, first);
++
+ frag->do_not_encrypt = first->do_not_encrypt;
+
+ pos += copylen;
+@@ -767,12 +782,10 @@ ieee80211_tx_h_calculate_duration(struct
+ tx->extra_frag[0]->len);
+
+ for (i = 0; i < tx->num_extra_frag; i++) {
+- if (i + 1 < tx->num_extra_frag) {
++ if (i + 1 < tx->num_extra_frag)
+ next_len = tx->extra_frag[i + 1]->len;
+- } else {
++ else
+ next_len = 0;
+- tx->rate_idx = tx->last_frag_rate_idx;
+- }
+
+ hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data;
+ hdr->duration_id = ieee80211_duration(tx, 0, next_len);
+@@ -825,7 +838,6 @@ __ieee80211_parse_tx_radiotap(struct iee
+ (struct ieee80211_radiotap_header *) skb->data;
+ struct ieee80211_supported_band *sband;
+ int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len);
+- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ sband = tx->local->hw.wiphy->bands[tx->channel->band];
+
+@@ -839,8 +851,6 @@ __ieee80211_parse_tx_radiotap(struct iee
+ */
+
+ while (!ret) {
+- int i, target_rate;
+-
+ ret = ieee80211_radiotap_iterator_next(&iterator);
+
+ if (ret)
+@@ -854,38 +864,6 @@ __ieee80211_parse_tx_radiotap(struct iee
+ * get_unaligned((type *)iterator.this_arg) to dereference
+ * iterator.this_arg for type "type" safely on all arches.
+ */
+- case IEEE80211_RADIOTAP_RATE:
+- /*
+- * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps
+- * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps
+- */
+- target_rate = (*iterator.this_arg) * 5;
+- for (i = 0; i < sband->n_bitrates; i++) {
+- struct ieee80211_rate *r;
+-
+- r = &sband->bitrates[i];
+-
+- if (r->bitrate == target_rate) {
+- tx->rate_idx = i;
+- break;
+- }
+- }
+- break;
+-
+- case IEEE80211_RADIOTAP_ANTENNA:
+- /*
+- * radiotap uses 0 for 1st ant, mac80211 is 1 for
+- * 1st ant
+- */
+- info->antenna_sel_tx = (*iterator.this_arg) + 1;
+- break;
+-
+-#if 0
+- case IEEE80211_RADIOTAP_DBM_TX_POWER:
+- control->power_level = *iterator.this_arg;
+- break;
+-#endif
+-
+ case IEEE80211_RADIOTAP_FLAGS:
+ if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) {
+ /*
+@@ -951,8 +929,6 @@ __ieee80211_tx_prepare(struct ieee80211_
+ tx->local = local;
+ tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ tx->channel = local->hw.conf.channel;
+- tx->rate_idx = -1;
+- tx->last_frag_rate_idx = -1;
+ /*
+ * Set this flag (used below to indicate "automatic fragmentation"),
+ * it will be cleared/left by radiotap as desired.
+@@ -1053,23 +1029,11 @@ static int __ieee80211_tx(struct ieee802
+ if (!tx->extra_frag[i])
+ continue;
+ info = IEEE80211_SKB_CB(tx->extra_frag[i]);
+- info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS |
+- IEEE80211_TX_CTL_USE_CTS_PROTECT |
+- IEEE80211_TX_CTL_CLEAR_PS_FILT |
++ info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT |
+ IEEE80211_TX_CTL_FIRST_FRAGMENT);
+ if (netif_subqueue_stopped(local->mdev,
+ tx->extra_frag[i]))
+ return IEEE80211_TX_FRAG_AGAIN;
+- if (i == tx->num_extra_frag) {
+- info->tx_rate_idx = tx->last_frag_rate_idx;
+-
+- if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG)
+- info->flags |=
+- IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+- else
+- info->flags &=
+- ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+- }
+
+ ret = local->ops->tx(local_to_hw(local),
+ tx->extra_frag[i]);
+@@ -1206,9 +1170,6 @@ retry:
+ store->skb = skb;
+ store->extra_frag = tx.extra_frag;
+ store->num_extra_frag = tx.num_extra_frag;
+- store->last_frag_rate_idx = tx.last_frag_rate_idx;
+- store->last_frag_rate_ctrl_probe =
+- !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG);
+ }
+ out:
+ rcu_read_unlock();
+@@ -1767,10 +1728,7 @@ void ieee80211_tx_pending(unsigned long
+ store = &local->pending_packet[i];
+ tx.extra_frag = store->extra_frag;
+ tx.num_extra_frag = store->num_extra_frag;
+- tx.last_frag_rate_idx = store->last_frag_rate_idx;
+ tx.flags = 0;
+- if (store->last_frag_rate_ctrl_probe)
+- tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG;
+ ret = __ieee80211_tx(local, store->skb, &tx);
+ if (ret) {
+ if (ret == IEEE80211_TX_FRAG_AGAIN)
+@@ -1858,7 +1816,6 @@ struct sk_buff *ieee80211_beacon_get(str
+ struct ieee80211_sub_if_data *sdata = NULL;
+ struct ieee80211_if_ap *ap = NULL;
+ struct ieee80211_if_sta *ifsta = NULL;
+- struct rate_selection rsel;
+ struct beacon_data *beacon;
+ struct ieee80211_supported_band *sband;
+ enum ieee80211_band band = local->hw.conf.channel->band;
+@@ -1962,32 +1919,22 @@ struct sk_buff *ieee80211_beacon_get(str
+ skb->do_not_encrypt = 1;
+
+ info->band = band;
+- rate_control_get_rate(sdata, sband, NULL, skb, &rsel);
+-
+- if (unlikely(rsel.rate_idx < 0)) {
+- if (net_ratelimit()) {
+- printk(KERN_DEBUG "%s: ieee80211_beacon_get: "
+- "no rate found\n",
+- wiphy_name(local->hw.wiphy));
+- }
+- dev_kfree_skb_any(skb);
+- skb = NULL;
+- goto out;
+- }
++ /*
++ * XXX: For now, always use the lowest rate
++ */
++ info->control.rates[0].idx = 0;
++ info->control.rates[0].count = 1;
++ info->control.rates[1].idx = -1;
++ info->control.rates[2].idx = -1;
++ info->control.rates[3].idx = -1;
++ BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4);
+
+ info->control.vif = vif;
+- info->tx_rate_idx = rsel.rate_idx;
+
+ info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
+ info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
+- if (sdata->vif.bss_conf.use_short_preamble &&
+- sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
+- info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
+-
+- info->control.retry_limit = 1;
+-
+-out:
++ out:
+ rcu_read_unlock();
+ return skb;
+ }
+--- a/net/mac80211/ieee80211_i.h
++++ b/net/mac80211/ieee80211_i.h
+@@ -142,7 +142,6 @@ typedef unsigned __bitwise__ ieee80211_t
+ #define IEEE80211_TX_FRAGMENTED BIT(0)
+ #define IEEE80211_TX_UNICAST BIT(1)
+ #define IEEE80211_TX_PS_BUFFERED BIT(2)
+-#define IEEE80211_TX_PROBE_LAST_FRAG BIT(3)
+
+ struct ieee80211_tx_data {
+ struct sk_buff *skb;
+@@ -153,11 +152,6 @@ struct ieee80211_tx_data {
+ struct ieee80211_key *key;
+
+ struct ieee80211_channel *channel;
+- s8 rate_idx;
+- /* use this rate (if set) for last fragment; rate can
+- * be set to lower rate for the first fragments, e.g.,
+- * when using CTS protection with IEEE 802.11g. */
+- s8 last_frag_rate_idx;
+
+ /* Extra fragments (in addition to the first fragment
+ * in skb) */
+@@ -203,9 +197,7 @@ struct ieee80211_rx_data {
+ struct ieee80211_tx_stored_packet {
+ struct sk_buff *skb;
+ struct sk_buff **extra_frag;
+- s8 last_frag_rate_idx;
+ int num_extra_frag;
+- bool last_frag_rate_ctrl_probe;
+ };
+
+ struct beacon_data {
+--- a/net/mac80211/rate.c
++++ b/net/mac80211/rate.c
+@@ -199,48 +199,44 @@ static void rate_control_release(struct
+ }
+
+ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
+- struct ieee80211_supported_band *sband,
+- struct sta_info *sta, struct sk_buff *skb,
+- struct rate_selection *sel)
++ struct sta_info *sta,
++ struct ieee80211_tx_rate_control *txrc)
+ {
+ struct rate_control_ref *ref = sdata->local->rate_ctrl;
+ void *priv_sta = NULL;
+ struct ieee80211_sta *ista = NULL;
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
+ int i;
+
+- sel->rate_idx = -1;
+- sel->nonerp_idx = -1;
+- sel->probe_idx = -1;
+- sel->max_rate_idx = sdata->max_ratectrl_rateidx;
+-
+ if (sta) {
+ ista = &sta->sta;
+ priv_sta = sta->rate_ctrl_priv;
+ }
+
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
++ info->control.rates[i].idx = -1;
++ info->control.rates[i].flags = 0;
++ info->control.rates[i].count = 1;
++ }
++
+ if (sta && sdata->force_unicast_rateidx > -1)
+- sel->rate_idx = sdata->force_unicast_rateidx;
++ info->control.rates[0].idx = sdata->force_unicast_rateidx;
+ else
+- ref->ops->get_rate(ref->priv, sband, ista, priv_sta, skb, sel);
++ ref->ops->get_rate(ref->priv, ista, priv_sta, txrc);
+
+- if (sdata->max_ratectrl_rateidx > -1 &&
+- sel->rate_idx > sdata->max_ratectrl_rateidx)
+- sel->rate_idx = sdata->max_ratectrl_rateidx;
+-
+- BUG_ON(sel->rate_idx < 0);
+-
+- /* Select a non-ERP backup rate. */
+- if (sel->nonerp_idx < 0) {
+- for (i = 0; i < sband->n_bitrates; i++) {
+- struct ieee80211_rate *rate = &sband->bitrates[i];
+- if (sband->bitrates[sel->rate_idx].bitrate < rate->bitrate)
+- break;
+-
+- if (rate_supported(ista, sband->band, i) &&
+- !(rate->flags & IEEE80211_RATE_ERP_G))
+- sel->nonerp_idx = i;
+- }
++ /*
++ * try to enforce the maximum rate the user wanted
++ */
++ if (sdata->max_ratectrl_rateidx > -1)
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
++ if (info->control.rates[i].flags & IEEE80211_TX_RC_MCS)
++ continue;
++ info->control.rates[i].idx =
++ min_t(s8, info->control.rates[i].idx,
++ sdata->max_ratectrl_rateidx);
+ }
++
++ BUG_ON(info->control.rates[0].idx < 0);
+ }
+
+ struct rate_control_ref *rate_control_get(struct rate_control_ref *ref)
+--- a/net/mac80211/rate.h
++++ b/net/mac80211/rate.h
+@@ -31,9 +31,8 @@ struct rate_control_ref {
+ struct rate_control_ref *rate_control_alloc(const char *name,
+ struct ieee80211_local *local);
+ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
+- struct ieee80211_supported_band *sband,
+- struct sta_info *sta, struct sk_buff *skb,
+- struct rate_selection *sel);
++ struct sta_info *sta,
++ struct ieee80211_tx_rate_control *txrc);
+ struct rate_control_ref *rate_control_get(struct rate_control_ref *ref);
+ void rate_control_put(struct rate_control_ref *ref);
+
+--- a/net/mac80211/sta_info.h
++++ b/net/mac80211/sta_info.h
+@@ -196,7 +196,7 @@ struct sta_ampdu_mlme {
+ * @tx_packets: number of RX/TX MSDUs
+ * @tx_bytes: TBD
+ * @tx_fragments: number of transmitted MPDUs
+- * @last_txrate_idx: Index of the last used transmit rate
++ * @last_txrate: description of the last used transmit rate
+ * @tid_seq: TBD
+ * @ampdu_mlme: TBD
+ * @timer_to_tid: identity mapping to ID timers
+@@ -267,7 +267,7 @@ struct sta_info {
+ unsigned long tx_packets;
+ unsigned long tx_bytes;
+ unsigned long tx_fragments;
+- unsigned int last_txrate_idx;
++ struct ieee80211_tx_rate last_tx_rate;
+ u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
+
+ /*
+--- a/net/mac80211/wext.c
++++ b/net/mac80211/wext.c
+@@ -636,8 +636,8 @@ static int ieee80211_ioctl_giwrate(struc
+
+ sta = sta_info_get(local, sdata->u.sta.bssid);
+
+- if (sta && sta->last_txrate_idx < sband->n_bitrates)
+- rate->value = sband->bitrates[sta->last_txrate_idx].bitrate;
++ if (sta && !(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS))
++ rate->value = sband->bitrates[sta->last_tx_rate.idx].bitrate;
+ else
+ rate->value = 0;
+
+--- a/net/mac80211/mesh_hwmp.c
++++ b/net/mac80211/mesh_hwmp.c
+@@ -218,12 +218,16 @@ static u32 airtime_link_metric_get(struc
+
+ if (sta->fail_avg >= 100)
+ return MAX_METRIC;
++
++ if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
++ return MAX_METRIC;
++
+ err = (sta->fail_avg << ARITH_SHIFT) / 100;
+
+ /* bitrate is in units of 100 Kbps, while we need rate in units of
+ * 1Mbps. This will be corrected on tx_time computation.
+ */
+- rate = sband->bitrates[sta->last_txrate_idx].bitrate;
++ rate = sband->bitrates[sta->last_tx_rate.idx].bitrate;
+ tx_time = (device_constant + 10 * test_frame_len / rate);
+ estimated_retx = ((1 << (2 * ARITH_SHIFT)) / (s_unit - err));
+ result = (tx_time * estimated_retx) >> (2 * ARITH_SHIFT) ;
+--- a/net/mac80211/rc80211_pid_algo.c
++++ b/net/mac80211/rc80211_pid_algo.c
+@@ -241,7 +241,7 @@ static void rate_control_pid_tx_status(v
+
+ /* Ignore all frames that were sent with a different rate than the rate
+ * we currently advise mac80211 to use. */
+- if (info->tx_rate_idx != spinfo->txrate_idx)
++ if (info->status.rates[0].idx != spinfo->txrate_idx)
+ return;
+
+ spinfo->tx_num_xmit++;
+@@ -253,10 +253,10 @@ static void rate_control_pid_tx_status(v
+ /* We count frames that totally failed to be transmitted as two bad
+ * frames, those that made it out but had some retries as one good and
+ * one bad frame. */
+- if (info->status.excessive_retries) {
++ if (!(info->flags & IEEE80211_TX_STAT_ACK)) {
+ spinfo->tx_num_failed += 2;
+ spinfo->tx_num_xmit++;
+- } else if (info->status.retry_count) {
++ } else if (info->status.rates[0].count) {
+ spinfo->tx_num_failed++;
+ spinfo->tx_num_xmit++;
+ }
+@@ -270,23 +270,31 @@ static void rate_control_pid_tx_status(v
+ }
+
+ static void
+-rate_control_pid_get_rate(void *priv, struct ieee80211_supported_band *sband,
+- struct ieee80211_sta *sta, void *priv_sta,
+- struct sk_buff *skb,
+- struct rate_selection *sel)
++rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
++ void *priv_sta,
++ struct ieee80211_tx_rate_control *txrc)
+ {
++ struct sk_buff *skb = txrc->skb;
++ struct ieee80211_supported_band *sband = txrc->sband;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct rc_pid_sta_info *spinfo = priv_sta;
+ int rateidx;
+ u16 fc;
+
++ /* XXX: Should use the user-configured values */
++ if (txrc->rts)
++ info->control.rates[0].count = 4; /* long retry count */
++ else
++ info->control.rates[0].count = 7; /* short retry count */
++
+ /* Send management frames and broadcast/multicast data using lowest
+ * rate. */
+ fc = le16_to_cpu(hdr->frame_control);
+ if (!sta || !spinfo ||
+ (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
+ is_multicast_ether_addr(hdr->addr1)) {
+- sel->rate_idx = rate_lowest_index(sband, sta);
++ info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ return;
+ }
+
+@@ -295,7 +303,7 @@ rate_control_pid_get_rate(void *priv, st
+ if (rateidx >= sband->n_bitrates)
+ rateidx = sband->n_bitrates - 1;
+
+- sel->rate_idx = rateidx;
++ info->control.rates[0].idx = rateidx;
+
+ #ifdef CONFIG_MAC80211_DEBUGFS
+ rate_control_pid_event_tx_rate(&spinfo->events,
+--- a/net/mac80211/rc80211_minstrel.c
++++ b/net/mac80211/rc80211_minstrel.c
+@@ -169,30 +169,20 @@ minstrel_tx_status(void *priv, struct ie
+ {
+ struct minstrel_sta_info *mi = priv_sta;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+- struct ieee80211_tx_altrate *ar = info->status.retries;
+- struct minstrel_priv *mp = priv;
+- int i, ndx, tries;
+- int success = 0;
++ struct ieee80211_tx_rate *ar = info->status.rates;
++ int i, ndx;
++ int success;
+
+- if (!info->status.excessive_retries)
+- success = 1;
++ success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+
+- if (!mp->has_mrr || (ar[0].rate_idx < 0)) {
+- ndx = rix_to_ndx(mi, info->tx_rate_idx);
+- tries = info->status.retry_count + 1;
+- mi->r[ndx].success += success;
+- mi->r[ndx].attempts += tries;
+- return;
+- }
+-
+- for (i = 0; i < 4; i++) {
+- if (ar[i].rate_idx < 0)
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
++ if (ar[i].idx < 0)
+ break;
+
+- ndx = rix_to_ndx(mi, ar[i].rate_idx);
+- mi->r[ndx].attempts += ar[i].limit + 1;
++ ndx = rix_to_ndx(mi, ar[i].idx);
++ mi->r[ndx].attempts += ar[i].count;
+
+- if ((i != 3) && (ar[i + 1].rate_idx < 0))
++ if ((i != IEEE80211_TX_MAX_RATES - 1) && (ar[i + 1].idx < 0))
+ mi->r[ndx].success += success;
+ }
+
+@@ -210,9 +200,9 @@ minstrel_get_retry_count(struct minstrel
+ {
+ unsigned int retry = mr->adjusted_retry_count;
+
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ retry = max(2U, min(mr->retry_count_rtscts, retry));
+- else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
++ else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ retry = max(2U, min(mr->retry_count_cts, retry));
+ return retry;
+ }
+@@ -234,14 +224,15 @@ minstrel_get_next_sample(struct minstrel
+ }
+
+ void
+-minstrel_get_rate(void *priv, struct ieee80211_supported_band *sband,
+- struct ieee80211_sta *sta, void *priv_sta,
+- struct sk_buff *skb, struct rate_selection *sel)
++minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
++ void *priv_sta, struct ieee80211_tx_rate_control *txrc)
+ {
++ struct sk_buff *skb = txrc->skb;
++ struct ieee80211_supported_band *sband = txrc->sband;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct minstrel_sta_info *mi = priv_sta;
+ struct minstrel_priv *mp = priv;
+- struct ieee80211_tx_altrate *ar = info->control.retries;
++ struct ieee80211_tx_rate *ar = info->control.rates;
+ unsigned int ndx, sample_ndx = 0;
+ bool mrr;
+ bool sample_slower = false;
+@@ -251,16 +242,12 @@ minstrel_get_rate(void *priv, struct iee
+ int sample_rate;
+
+ if (!sta || !mi || use_low_rate(skb)) {
+- sel->rate_idx = rate_lowest_index(sband, sta);
++ ar[0].idx = rate_lowest_index(sband, sta);
++ ar[0].count = mp->max_retry;
+ return;
+ }
+
+- mrr = mp->has_mrr;
+-
+- /* mac80211 does not allow mrr for RTS/CTS */
+- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
+- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
+- mrr = false;
++ mrr = mp->has_mrr && !txrc->rts && !txrc->bss_conf->use_cts_prot;
+
+ if (time_after(jiffies, mi->stats_update + (mp->update_interval *
+ HZ) / 1000))
+@@ -315,13 +302,12 @@ minstrel_get_rate(void *priv, struct iee
+ mi->sample_deferred++;
+ }
+ }
+- sel->rate_idx = mi->r[ndx].rix;
+- info->control.retry_limit = minstrel_get_retry_count(&mi->r[ndx], info);
++ ar[0].idx = mi->r[ndx].rix;
++ ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info);
+
+ if (!mrr) {
+- ar[0].rate_idx = mi->lowest_rix;
+- ar[0].limit = mp->max_retry;
+- ar[1].rate_idx = -1;
++ ar[1].idx = mi->lowest_rix;
++ ar[1].count = mp->max_retry;
+ return;
+ }
+
+@@ -336,9 +322,9 @@ minstrel_get_rate(void *priv, struct iee
+ }
+ mrr_ndx[1] = mi->max_prob_rate;
+ mrr_ndx[2] = 0;
+- for (i = 0; i < 3; i++) {
+- ar[i].rate_idx = mi->r[mrr_ndx[i]].rix;
+- ar[i].limit = mi->r[mrr_ndx[i]].adjusted_retry_count;
++ for (i = 1; i < 4; i++) {
++ ar[i].idx = mi->r[mrr_ndx[i - 1]].rix;
++ ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count;
+ }
+ }
+
+@@ -532,13 +518,13 @@ minstrel_alloc(struct ieee80211_hw *hw,
+ /* maximum time that the hw is allowed to stay in one MRR segment */
+ mp->segment_size = 6000;
+
+- if (hw->max_altrate_tries > 0)
+- mp->max_retry = hw->max_altrate_tries;
++ if (hw->max_rate_tries > 0)
++ mp->max_retry = hw->max_rate_tries;
+ else
+ /* safe default, does not necessarily have to match hw properties */
+ mp->max_retry = 7;
+
+- if (hw->max_altrates >= 3)
++ if (hw->max_rates >= 4)
+ mp->has_mrr = true;
+
+ mp->hw = hw;
+--- a/net/mac80211/rc80211_pid_debugfs.c
++++ b/net/mac80211/rc80211_pid_debugfs.c
+@@ -43,6 +43,7 @@ void rate_control_pid_event_tx_status(st
+ {
+ union rc_pid_event_data evd;
+
++ evd.flags = stat->flags;
+ memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info));
+ rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd);
+ }
+@@ -167,8 +168,8 @@ static ssize_t rate_control_pid_events_r
+ switch (ev->type) {
+ case RC_PID_EVENT_TYPE_TX_STATUS:
+ p += snprintf(pb + p, length - p, "tx_status %u %u",
+- ev->data.tx_status.status.excessive_retries,
+- ev->data.tx_status.status.retry_count);
++ !(ev->data.flags & IEEE80211_TX_STAT_ACK),
++ ev->data.tx_status.status.rates[0].idx);
+ break;
+ case RC_PID_EVENT_TYPE_RATE_CHANGE:
+ p += snprintf(pb + p, length - p, "rate_change %d %d",
+--- a/net/mac80211/rc80211_pid.h
++++ b/net/mac80211/rc80211_pid.h
+@@ -61,6 +61,7 @@ enum rc_pid_event_type {
+ union rc_pid_event_data {
+ /* RC_PID_EVENT_TX_STATUS */
+ struct {
++ u32 flags;
+ struct ieee80211_tx_info tx_status;
+ };
+ /* RC_PID_EVENT_TYPE_RATE_CHANGE */
+--- a/drivers/net/wireless/zd1211rw/zd_mac.c
++++ b/drivers/net/wireless/zd1211rw/zd_mac.c
+@@ -296,15 +296,14 @@ static void zd_op_stop(struct ieee80211_
+ * If no status information has been requested, the skb is freed.
+ */
+ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
+- u32 flags, int ackssi, bool success)
++ int ackssi, bool success)
+ {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
+
+- if (!success)
+- info->status.excessive_retries = 1;
+- info->flags |= flags;
++ if (success)
++ info->flags |= IEEE80211_TX_STAT_ACK;
+ info->status.ack_signal = ackssi;
+ ieee80211_tx_status_irqsafe(hw, skb);
+ }
+@@ -326,7 +325,7 @@ void zd_mac_tx_failed(struct ieee80211_h
+ if (skb == NULL)
+ return;
+
+- tx_status(hw, skb, 0, 0, 0);
++ tx_status(hw, skb, 0, 0);
+ }
+
+ /**
+@@ -347,7 +346,7 @@ void zd_mac_tx_to_dev(struct sk_buff *sk
+ skb_pull(skb, sizeof(struct zd_ctrlset));
+ if (unlikely(error ||
+ (info->flags & IEEE80211_TX_CTL_NO_ACK))) {
+- tx_status(hw, skb, 0, 0, !error);
++ tx_status(hw, skb, 0, !error);
+ } else {
+ struct sk_buff_head *q =
+ &zd_hw_mac(hw)->ack_wait_queue;
+@@ -406,7 +405,8 @@ static int zd_calc_tx_length_us(u8 *serv
+ }
+
+ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
+- struct ieee80211_hdr *header, u32 flags)
++ struct ieee80211_hdr *header,
++ struct ieee80211_tx_info *info)
+ {
+ /*
+ * CONTROL TODO:
+@@ -417,7 +417,7 @@ static void cs_set_control(struct zd_mac
+ cs->control = 0;
+
+ /* First fragment */
+- if (flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
++ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ cs->control |= ZD_CS_NEED_RANDOM_BACKOFF;
+
+ /* Multicast */
+@@ -428,10 +428,10 @@ static void cs_set_control(struct zd_mac
+ if (ieee80211_is_pspoll(header->frame_control))
+ cs->control |= ZD_CS_PS_POLL_FRAME;
+
+- if (flags & IEEE80211_TX_CTL_USE_RTS_CTS)
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ cs->control |= ZD_CS_RTS;
+
+- if (flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ cs->control |= ZD_CS_SELF_CTS;
+
+ /* FIXME: Management frame? */
+@@ -517,12 +517,12 @@ static int fill_ctrlset(struct zd_mac *m
+ txrate = ieee80211_get_tx_rate(mac->hw, info);
+
+ cs->modulation = txrate->hw_value;
+- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ cs->modulation = txrate->hw_value_short;
+
+ cs->tx_length = cpu_to_le16(frag_len);
+
+- cs_set_control(mac, cs, hdr, info->flags);
++ cs_set_control(mac, cs, hdr, info);
+
+ packet_length = frag_len + sizeof(struct zd_ctrlset) + 10;
+ ZD_ASSERT(packet_length <= 0xffff);
+@@ -618,7 +618,7 @@ static int filter_ack(struct ieee80211_h
+ if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1)))
+ {
+ __skb_unlink(skb, q);
+- tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1);
++ tx_status(hw, skb, stats->signal, 1);
+ goto out;
+ }
+ }
+--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+@@ -499,6 +499,7 @@ void rt2x00lib_txdone(struct queue_entry
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
++ bool rts;
+
+ /*
+ * Unmap the skb.
+@@ -528,14 +529,14 @@ void rt2x00lib_txdone(struct queue_entry
+ rt2x00dev->link.qual.tx_failed +=
+ test_bit(TXDONE_FAILURE, &txdesc->flags);
+
++ rts = !!(tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS);
++
+ /*
+ * Initialize TX status
+ */
+- memset(&tx_info->status, 0, sizeof(tx_info->status));
++ ieee80211_tx_info_clear_status(tx_info);
+ tx_info->status.ack_signal = 0;
+- tx_info->status.excessive_retries =
+- test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags);
+- tx_info->status.retry_count = txdesc->retry;
++ tx_info->status.rates[0].count = txdesc->retry + 1;
+
+ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
+@@ -544,7 +545,7 @@ void rt2x00lib_txdone(struct queue_entry
+ rt2x00dev->low_level_stats.dot11ACKFailureCount++;
+ }
+
+- if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
++ if (rts) {
+ if (test_bit(TXDONE_SUCCESS, &txdesc->flags))
+ rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
+ else if (test_bit(TXDONE_FAILURE, &txdesc->flags))
+--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
++++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
+@@ -39,7 +39,7 @@ static int rt2x00mac_tx_rts_cts(struct r
+ unsigned int data_length;
+ int retval = 0;
+
+- if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
++ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ data_length = sizeof(struct ieee80211_cts);
+ else
+ data_length = sizeof(struct ieee80211_rts);
+@@ -64,11 +64,11 @@ static int rt2x00mac_tx_rts_cts(struct r
+ */
+ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
+ rts_info = IEEE80211_SKB_CB(skb);
+- rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
+- rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
++ rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS;
++ rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT;
+ rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+- if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
++ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ rts_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+ else
+ rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
+@@ -84,7 +84,7 @@ static int rt2x00mac_tx_rts_cts(struct r
+ data_length += rt2x00crypto_tx_overhead(tx_info);
+ #endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
+- if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
++ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+ ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
+ frag_skb->data, data_length, tx_info,
+ (struct ieee80211_cts *)(skb->data));
+@@ -146,8 +146,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw
+ * inside the hardware.
+ */
+ frame_control = le16_to_cpu(ieee80211hdr->frame_control);
+- if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
+- IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
++ if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
++ IEEE80211_TX_RC_USE_CTS_PROTECT)) &&
+ !rt2x00dev->ops->hw->set_rts_threshold) {
+ if (rt2x00queue_available(queue) <= 1)
+ goto exit_fail;
+--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
++++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
+@@ -230,8 +230,15 @@ static void rt2x00queue_create_tx_descri
+ /*
+ * Determine retry information.
+ */
+- txdesc->retry_limit = tx_info->control.retry_limit;
+- if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
++ txdesc->retry_limit = tx_info->control.rates[0].count - 1;
++ /*
++ * XXX: If at this point we knew whether the HW is going to use
++ * the RETRY_MODE bit or the retry_limit (currently all
++ * use the RETRY_MODE bit) we could do something like b43
++ * does, set the RETRY_MODE bit when the RC algorithm is
++ * requesting more than the long retry limit.
++ */
++ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags);
+
+ /*
+--- a/drivers/net/wireless/adm8211.c
++++ b/drivers/net/wireless/adm8211.c
+@@ -341,15 +341,14 @@ static void adm8211_interrupt_tci(struct
+ pci_unmap_single(priv->pdev, info->mapping,
+ info->skb->len, PCI_DMA_TODEVICE);
+
+- memset(&txi->status, 0, sizeof(txi->status));
++ ieee80211_tx_info_clear_status(txi);
++
+ skb_pull(skb, sizeof(struct adm8211_tx_hdr));
+ memcpy(skb_push(skb, info->hdrlen), skb->cb, info->hdrlen);
+- if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) {
+- if (status & TDES0_STATUS_ES)
+- txi->status.excessive_retries = 1;
+- else
+- txi->flags |= IEEE80211_TX_STAT_ACK;
+- }
++ if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) &&
++ !(status & TDES0_STATUS_ES))
++ txi->flags |= IEEE80211_TX_STAT_ACK;
++
+ ieee80211_tx_status_irqsafe(dev, skb);
+
+ info->skb = NULL;
+@@ -1691,8 +1690,10 @@ static int adm8211_tx(struct ieee80211_h
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_rate *txrate = ieee80211_get_tx_rate(dev, info);
++ u8 rc_flags;
+
+- short_preamble = !!(txrate->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE);
++ rc_flags = info->control.rates[0].flags;
++ short_preamble = !!(rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
+ plcp_signal = txrate->bitrate;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+@@ -1724,10 +1725,10 @@ static int adm8211_tx(struct ieee80211_h
+ if (short_preamble)
+ txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_SHORT_PREAMBLE);
+
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
++ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ txhdr->header_control |= cpu_to_le16(ADM8211_TXHDRCTL_ENABLE_RTS);
+
+- txhdr->retry_limit = info->control.retry_limit;
++ txhdr->retry_limit = info->control.rates[0].count;
+
+ adm8211_tx_raw(dev, skb, plcp_signal, hdrlen);
+
+--- a/drivers/net/wireless/ath5k/base.c
++++ b/drivers/net/wireless/ath5k/base.c
+@@ -542,8 +542,8 @@ ath5k_pci_probe(struct pci_dev *pdev,
+
+ /* set up multi-rate retry capabilities */
+ if (sc->ah->ah_version == AR5K_AR5212) {
+- hw->max_altrates = 3;
+- hw->max_altrate_tries = 11;
++ hw->max_rates = 4;
++ hw->max_rate_tries = 11;
+ }
+
+ /* Finish private driver data initialization */
+@@ -1188,7 +1188,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc
+ ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
+ (sc->power_level * 2),
+ ieee80211_get_tx_rate(sc->hw, info)->hw_value,
+- info->control.retry_limit, keyidx, 0, flags, 0, 0);
++ info->control.rates[0].count, keyidx, 0, flags, 0, 0);
+ if (ret)
+ goto err_unmap;
+
+@@ -1200,7 +1200,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc
+ break;
+
+ mrr_rate[i] = rate->hw_value;
+- mrr_tries[i] = info->control.retries[i].limit;
++ mrr_tries[i] = info->control.rates[i + 1].count;
+ }
+
+ ah->ah_setup_mrr_tx_desc(ah, ds,
+@@ -1846,30 +1846,26 @@ ath5k_tx_processq(struct ath5k_softc *sc
+ pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
+ PCI_DMA_TODEVICE);
+
+- memset(&info->status, 0, sizeof(info->status));
+- info->tx_rate_idx = ath5k_hw_to_driver_rix(sc,
+- ts.ts_rate[ts.ts_final_idx]);
+- info->status.retry_count = ts.ts_longretry;
+-
++ ieee80211_tx_info_clear_status(info);
+ for (i = 0; i < 4; i++) {
+- struct ieee80211_tx_altrate *r =
+- &info->status.retries[i];
++ struct ieee80211_tx_rate *r =
++ &info->status.rates[i];
+
+ if (ts.ts_rate[i]) {
+- r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
+- r->limit = ts.ts_retry[i];
++ r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
++ r->count = ts.ts_retry[i];
+ } else {
+- r->rate_idx = -1;
+- r->limit = 0;
++ r->idx = -1;
++ r->count = 0;
+ }
+ }
+
+- info->status.excessive_retries = 0;
++ /* count the successful attempt as well */
++ info->status.rates[ts.ts_final_idx].count++;
++
+ if (unlikely(ts.ts_status)) {
+ sc->ll_stats.dot11ACKFailureCount++;
+- if (ts.ts_status & AR5K_TXERR_XRETRY)
+- info->status.excessive_retries = 1;
+- else if (ts.ts_status & AR5K_TXERR_FILT)
++ if (ts.ts_status & AR5K_TXERR_FILT)
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ } else {
+ info->flags |= IEEE80211_TX_STAT_ACK;
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -461,12 +461,13 @@ void ath_tx_complete(struct ath_softc *s
+ DPRINTF(sc, ATH_DBG_XMIT,
+ "%s: TX complete: skb: %p\n", __func__, skb);
+
++ ieee80211_tx_info_clear_status(tx_info);
+ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK ||
+ tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
+- /* free driver's private data area of tx_info */
+- if (tx_info->driver_data[0] != NULL)
+- kfree(tx_info->driver_data[0]);
+- tx_info->driver_data[0] = NULL;
++ /* free driver's private data area of tx_info, XXX: HACK! */
++ if (tx_info->control.vif != NULL)
++ kfree(tx_info->control.vif);
++ tx_info->control.vif = NULL;
+ }
+
+ if (tx_status->flags & ATH_TX_BAR) {
+@@ -474,17 +475,12 @@ void ath_tx_complete(struct ath_softc *s
+ tx_status->flags &= ~ATH_TX_BAR;
+ }
+
+- if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
+- if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+- /* Frame was not ACKed, but an ACK was expected */
+- tx_info->status.excessive_retries = 1;
+- }
+- } else {
++ if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) {
+ /* Frame was ACKed */
+ tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ }
+
+- tx_info->status.retry_count = tx_status->retries;
++ tx_info->status.rates[0].count = tx_status->retries + 1;
+
+ ieee80211_tx_status(hw, skb);
+ if (an)
+--- a/drivers/net/wireless/ath9k/rc.c
++++ b/drivers/net/wireless/ath9k/rc.c
+@@ -1864,24 +1864,21 @@ static void ath_tx_status(void *priv, st
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = hdr->frame_control;
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++ /* XXX: UGLY HACK!! */
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+
+ spin_lock_bh(&sc->node_lock);
+ an = ath_node_find(sc, hdr->addr1);
+ spin_unlock_bh(&sc->node_lock);
+
+- if (!an || !priv_sta || !ieee80211_is_data(fc)) {
+- if (tx_info->driver_data[0] != NULL) {
+- kfree(tx_info->driver_data[0]);
+- tx_info->driver_data[0] = NULL;
+- }
++ if (tx_info_priv == NULL)
+ return;
+- }
+- if (tx_info->driver_data[0] != NULL) {
++
++ if (an && priv_sta && ieee80211_is_data(fc))
+ ath_rate_tx_complete(sc, an, priv_sta, tx_info_priv);
+- kfree(tx_info->driver_data[0]);
+- tx_info->driver_data[0] = NULL;
+- }
++
++ kfree(tx_info_priv);
++ tx_info->control.vif = NULL;
+ }
+
+ static void ath_tx_aggr_resp(struct ath_softc *sc,
+@@ -1927,10 +1924,11 @@ static void ath_tx_aggr_resp(struct ath_
+ }
+ }
+
+-static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband,
+- struct ieee80211_sta *sta, void *priv_sta,
+- struct sk_buff *skb, struct rate_selection *sel)
++static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
++ struct ieee80211_tx_rate_control *txrc)
+ {
++ struct ieee80211_supported_band *sband = txrc->sband;
++ struct sk_buff *skb = txrc->skb;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ath_softc *sc = priv;
+ struct ieee80211_hw *hw = sc->hw;
+@@ -1946,17 +1944,17 @@ static void ath_get_rate(void *priv, str
+
+ DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
+
+- /* allocate driver private area of tx_info */
+- tx_info->driver_data[0] = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
+- ASSERT(tx_info->driver_data[0] != NULL);
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++ /* allocate driver private area of tx_info, XXX: UGLY HACK! */
++ tx_info->control.vif = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
++ ASSERT(tx_info_priv != NULL);
+
+ lowest_idx = rate_lowest_index(sband, sta);
+ tx_info_priv->min_rate = (sband->bitrates[lowest_idx].bitrate * 2) / 10;
+ /* lowest rate for management and multicast/broadcast frames */
+ if (!ieee80211_is_data(fc) ||
+ is_multicast_ether_addr(hdr->addr1) || !sta) {
+- sel->rate_idx = lowest_idx;
++ tx_info->control.rates[0].idx = lowest_idx;
+ return;
+ }
+
+@@ -1967,8 +1965,10 @@ static void ath_get_rate(void *priv, str
+ tx_info_priv->rcs,
+ &is_probe,
+ false);
++#if 0
+ if (is_probe)
+ sel->probe_idx = ath_rc_priv->tx_ratectrl.probe_rate;
++#endif
+
+ /* Ratecontrol sometimes returns invalid rate index */
+ if (tx_info_priv->rcs[0].rix != 0xff)
+@@ -1976,7 +1976,7 @@ static void ath_get_rate(void *priv, str
+ else
+ tx_info_priv->rcs[0].rix = ath_rc_priv->prev_data_rix;
+
+- sel->rate_idx = tx_info_priv->rcs[0].rix;
++ tx_info->control.rates[0].idx = tx_info_priv->rcs[0].rix;
+
+ /* Check if aggregation has to be enabled for this tid */
+
+--- a/drivers/net/wireless/ath9k/xmit.c
++++ b/drivers/net/wireless/ath9k/xmit.c
+@@ -168,7 +168,9 @@ static void fill_min_rates(struct sk_buf
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = hdr->frame_control;
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++
++ /* XXX: HACK! */
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+
+ if (ieee80211_is_mgmt(fc) || ieee80211_is_ctl(fc)) {
+ txctl->use_minrate = 1;
+@@ -288,13 +290,16 @@ static int ath_tx_prepare(struct ath_sof
+
+ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
+ txctl->flags |= ATH9K_TXDESC_NOACK;
+- if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
++
++ if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ txctl->flags |= ATH9K_TXDESC_RTSENA;
+
+ /*
+ * Setup for rate calculations.
+ */
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++
++ /* XXX: HACK! */
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+ rcs = tx_info_priv->rcs;
+
+ if (ieee80211_is_data(fc) && !txctl->use_minrate) {
+@@ -854,7 +859,9 @@ static int ath_tx_send_normal(struct ath
+
+ skb = (struct sk_buff *)bf->bf_mpdu;
+ tx_info = IEEE80211_SKB_CB(skb);
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++
++ /* XXX: HACK! */
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+ memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+ /* update starting sequence number for subsequent ADDBA request */
+@@ -1248,8 +1255,9 @@ static int ath_tx_processq(struct ath_so
+ }
+ skb = bf->bf_mpdu;
+ tx_info = IEEE80211_SKB_CB(skb);
+- tx_info_priv = (struct ath_tx_info_priv *)
+- tx_info->driver_data[0];
++
++ /* XXX: HACK! */
++ tx_info_priv = (struct ath_tx_info_priv *) tx_info->control.vif;
+ if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT)
+ tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 &&
+@@ -1430,7 +1438,8 @@ static int ath_tx_send_ampdu(struct ath_
+
+ skb = (struct sk_buff *)bf->bf_mpdu;
+ tx_info = IEEE80211_SKB_CB(skb);
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++ /* XXX: HACK! */
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+ memcpy(bf->bf_rcs, tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+ /* Add sub-frame to BAW */
+@@ -1464,7 +1473,7 @@ static u32 ath_lookup_rate(struct ath_so
+ skb = (struct sk_buff *)bf->bf_mpdu;
+ tx_info = IEEE80211_SKB_CB(skb);
+ tx_info_priv = (struct ath_tx_info_priv *)
+- tx_info->driver_data[0];
++ tx_info->control.vif; /* XXX: HACK! */
+ memcpy(bf->bf_rcs,
+ tx_info_priv->rcs, 4 * sizeof(tx_info_priv->rcs[0]));
+
+@@ -1924,7 +1933,8 @@ static int ath_tx_start_dma(struct ath_s
+
+ bf->bf_flags = txctl->flags;
+ bf->bf_keytype = txctl->keytype;
+- tx_info_priv = (struct ath_tx_info_priv *)tx_info->driver_data[0];
++ /* XXX: HACK! */
++ tx_info_priv = (struct ath_tx_info_priv *)tx_info->control.vif;
+ rcs = tx_info_priv->rcs;
+ bf->bf_rcs[0] = rcs[0];
+ bf->bf_rcs[1] = rcs[1];
+--- a/drivers/net/wireless/b43/dma.c
++++ b/drivers/net/wireless/b43/dma.c
+@@ -1387,13 +1387,13 @@ void b43_dma_handle_txstatus(struct b43_
+
+ info = IEEE80211_SKB_CB(meta->skb);
+
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
+
+ /*
+ * Call back to inform the ieee80211 subsystem about
+ * the status of the transmission.
+ */
+- frame_succeed = b43_fill_txstatus_report(info, status);
++ frame_succeed = b43_fill_txstatus_report(dev, info, status);
+ #ifdef CONFIG_B43_DEBUG
+ if (frame_succeed)
+ ring->nr_succeed_tx_packets++;
+--- a/drivers/net/wireless/b43/main.c
++++ b/drivers/net/wireless/b43/main.c
+@@ -4563,7 +4563,7 @@ static int b43_wireless_init(struct ssb_
+ BIT(NL80211_IFTYPE_ADHOC);
+
+ hw->queues = b43_modparam_qos ? 4 : 1;
+- hw->max_altrates = 1;
++ hw->max_rates = 2;
+ SET_IEEE80211_DEV(hw, dev->dev);
+ if (is_valid_ether_addr(sprom->et1mac))
+ SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
+--- a/drivers/net/wireless/b43/pio.c
++++ b/drivers/net/wireless/b43/pio.c
+@@ -587,9 +587,9 @@ void b43_pio_handle_txstatus(struct b43_
+ spin_lock(&q->lock); /* IRQs are already disabled. */
+
+ info = IEEE80211_SKB_CB(pack->skb);
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
+
+- b43_fill_txstatus_report(info, status);
++ b43_fill_txstatus_report(dev, info, status);
+
+ total_len = pack->skb->len + b43_txhdr_size(dev);
+ total_len = roundup(total_len, 4);
+--- a/drivers/net/wireless/b43/xmit.c
++++ b/drivers/net/wireless/b43/xmit.c
+@@ -185,7 +185,7 @@ int b43_generate_txhdr(struct b43_wldev
+ u8 *_txhdr,
+ const unsigned char *fragment_data,
+ unsigned int fragment_len,
+- const struct ieee80211_tx_info *info,
++ struct ieee80211_tx_info *info,
+ u16 cookie)
+ {
+ struct b43_txhdr *txhdr = (struct b43_txhdr *)_txhdr;
+@@ -202,6 +202,7 @@ int b43_generate_txhdr(struct b43_wldev
+ u16 phy_ctl = 0;
+ u8 extra_ft = 0;
+ struct ieee80211_rate *txrate;
++ struct ieee80211_tx_rate *rates;
+
+ memset(txhdr, 0, sizeof(*txhdr));
+
+@@ -291,7 +292,7 @@ int b43_generate_txhdr(struct b43_wldev
+ phy_ctl |= B43_TXH_PHY_ENC_OFDM;
+ else
+ phy_ctl |= B43_TXH_PHY_ENC_CCK;
+- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ phy_ctl |= B43_TXH_PHY_SHORTPRMBL;
+
+ switch (b43_ieee80211_antenna_sanitize(dev, info->antenna_sel_tx)) {
+@@ -314,6 +315,7 @@ int b43_generate_txhdr(struct b43_wldev
+ B43_WARN_ON(1);
+ }
+
++ rates = info->control.rates;
+ /* MAC control */
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+ mac_ctl |= B43_TXH_MAC_ACK;
+@@ -324,12 +326,22 @@ int b43_generate_txhdr(struct b43_wldev
+ mac_ctl |= B43_TXH_MAC_STMSDU;
+ if (phy->type == B43_PHYTYPE_A)
+ mac_ctl |= B43_TXH_MAC_5GHZ;
+- if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
++
++ /* Overwrite rates[0].count to make the retry calculation
++ * in the tx status easier. need the actual retry limit to
++ * detect whether the fallback rate was used.
++ */
++ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
++ (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) {
++ rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count;
+ mac_ctl |= B43_TXH_MAC_LONGFRAME;
++ } else {
++ rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count;
++ }
+
+ /* Generate the RTS or CTS-to-self frame */
+- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
+- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
++ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
++ (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) {
+ unsigned int len;
+ struct ieee80211_hdr *hdr;
+ int rts_rate, rts_rate_fb;
+@@ -344,7 +356,7 @@ int b43_generate_txhdr(struct b43_wldev
+ rts_rate_fb = b43_calc_fallback_rate(rts_rate);
+ rts_rate_fb_ofdm = b43_is_ofdm_rate(rts_rate_fb);
+
+- if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ struct ieee80211_cts *cts;
+
+ if (b43_is_old_txhdr_format(dev)) {
+@@ -687,10 +699,18 @@ void b43_handle_txstatus(struct b43_wlde
+ /* Fill out the mac80211 TXstatus report based on the b43-specific
+ * txstatus report data. This returns a boolean whether the frame was
+ * successfully transmitted. */
+-bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
++bool b43_fill_txstatus_report(struct b43_wldev *dev,
++ struct ieee80211_tx_info *report,
+ const struct b43_txstatus *status)
+ {
+ bool frame_success = 1;
++ int retry_limit;
++
++ /* preserve the confiured retry limit before clearing the status
++ * The xmit function has overwritten the rc's value with the actual
++ * retry limit done by the hardware */
++ retry_limit = report->status.rates[0].count;
++ ieee80211_tx_info_clear_status(report);
+
+ if (status->acked) {
+ /* The frame was ACKed. */
+@@ -700,14 +720,32 @@ bool b43_fill_txstatus_report(struct iee
+ if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ /* ...but we expected an ACK. */
+ frame_success = 0;
+- report->status.excessive_retries = 1;
+ }
+ }
+ if (status->frame_count == 0) {
+ /* The frame was not transmitted at all. */
+- report->status.retry_count = 0;
+- } else
+- report->status.retry_count = status->frame_count - 1;
++ report->status.rates[0].count = 0;
++ } else if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
++ /*
++ * If the short retries (RTS, not data frame) have exceeded
++ * the limit, the hw will not have tried the selected rate,
++ * but will have used the fallback rate instead.
++ * Don't let the rate control count attempts for the selected
++ * rate in this case, otherwise the statistics will be off.
++ */
++ report->status.rates[0].count = 0;
++ report->status.rates[1].count = status->frame_count;
++ } else {
++ if (status->frame_count > retry_limit) {
++ report->status.rates[0].count = retry_limit;
++ report->status.rates[1].count = status->frame_count -
++ retry_limit;
++
++ } else {
++ report->status.rates[0].count = status->frame_count;
++ report->status.rates[1].idx = -1;
++ }
++ }
+
+ return frame_success;
+ }
+--- a/drivers/net/wireless/b43/xmit.h
++++ b/drivers/net/wireless/b43/xmit.h
+@@ -178,7 +178,7 @@ int b43_generate_txhdr(struct b43_wldev
+ u8 * txhdr,
+ const unsigned char *fragment_data,
+ unsigned int fragment_len,
+- const struct ieee80211_tx_info *txctl, u16 cookie);
++ struct ieee80211_tx_info *txctl, u16 cookie);
+
+ /* Transmit Status */
+ struct b43_txstatus {
+@@ -294,7 +294,8 @@ void b43_rx(struct b43_wldev *dev, struc
+
+ void b43_handle_txstatus(struct b43_wldev *dev,
+ const struct b43_txstatus *status);
+-bool b43_fill_txstatus_report(struct ieee80211_tx_info *report,
++bool b43_fill_txstatus_report(struct b43_wldev *dev,
++ struct ieee80211_tx_info *report,
+ const struct b43_txstatus *status);
+
+ void b43_tx_suspend(struct b43_wldev *dev);
+--- a/drivers/net/wireless/b43legacy/dma.c
++++ b/drivers/net/wireless/b43legacy/dma.c
+@@ -1411,6 +1411,7 @@ void b43legacy_dma_handle_txstatus(struc
+ struct b43legacy_dmaring *ring;
+ struct b43legacy_dmadesc_generic *desc;
+ struct b43legacy_dmadesc_meta *meta;
++ int retry_limit;
+ int slot;
+
+ ring = parse_cookie(dev, status->cookie, &slot);
+@@ -1437,25 +1438,42 @@ void b43legacy_dma_handle_txstatus(struc
+ struct ieee80211_tx_info *info;
+ BUG_ON(!meta->skb);
+ info = IEEE80211_SKB_CB(meta->skb);
+- /* Call back to inform the ieee80211 subsystem about the
+- * status of the transmission.
+- * Some fields of txstat are already filled in dma_tx().
+- */
+
+- memset(&info->status, 0, sizeof(info->status));
++ /* preserve the confiured retry limit before clearing the status
++ * The xmit function has overwritten the rc's value with the actual
++ * retry limit done by the hardware */
++ retry_limit = info->status.rates[0].count;
++ ieee80211_tx_info_clear_status(info);
+
+- if (status->acked) {
++ if (status->acked)
+ info->flags |= IEEE80211_TX_STAT_ACK;
++
++ if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
++ /*
++ * If the short retries (RTS, not data frame) have exceeded
++ * the limit, the hw will not have tried the selected rate,
++ * but will have used the fallback rate instead.
++ * Don't let the rate control count attempts for the selected
++ * rate in this case, otherwise the statistics will be off.
++ */
++ info->status.rates[0].count = 0;
++ info->status.rates[1].count = status->frame_count;
+ } else {
+- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+- info->status.excessive_retries = 1;
++ if (status->frame_count > retry_limit) {
++ info->status.rates[0].count = retry_limit;
++ info->status.rates[1].count = status->frame_count -
++ retry_limit;
++
++ } else {
++ info->status.rates[0].count = status->frame_count;
++ info->status.rates[1].idx = -1;
++ }
+ }
+- if (status->frame_count == 0) {
+- /* The frame was not transmitted at all. */
+- info->status.retry_count = 0;
+- } else
+- info->status.retry_count = status->frame_count
+- - 1;
++
++ /* Call back to inform the ieee80211 subsystem about the
++ * status of the transmission.
++ * Some fields of txstat are already filled in dma_tx().
++ */
+ ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb);
+ /* skb is freed by ieee80211_tx_status_irqsafe() */
+ meta->skb = NULL;
+--- a/drivers/net/wireless/b43legacy/main.c
++++ b/drivers/net/wireless/b43legacy/main.c
+@@ -3691,7 +3691,7 @@ static int b43legacy_wireless_init(struc
+ BIT(NL80211_IFTYPE_WDS) |
+ BIT(NL80211_IFTYPE_ADHOC);
+ hw->queues = 1; /* FIXME: hardware has more queues */
+- hw->max_altrates = 1;
++ hw->max_rates = 2;
+ SET_IEEE80211_DEV(hw, dev->dev);
+ if (is_valid_ether_addr(sprom->et1mac))
+ SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
+--- a/drivers/net/wireless/b43legacy/pio.c
++++ b/drivers/net/wireless/b43legacy/pio.c
+@@ -491,6 +491,7 @@ void b43legacy_pio_handle_txstatus(struc
+ struct b43legacy_pioqueue *queue;
+ struct b43legacy_pio_txpacket *packet;
+ struct ieee80211_tx_info *info;
++ int retry_limit;
+
+ queue = parse_cookie(dev, status->cookie, &packet);
+ B43legacy_WARN_ON(!queue);
+@@ -503,11 +504,37 @@ void b43legacy_pio_handle_txstatus(struc
+ sizeof(struct b43legacy_txhdr_fw3));
+
+ info = IEEE80211_SKB_CB(packet->skb);
+- memset(&info->status, 0, sizeof(info->status));
++
++ /* preserve the confiured retry limit before clearing the status
++ * The xmit function has overwritten the rc's value with the actual
++ * retry limit done by the hardware */
++ retry_limit = info->status.rates[0].count;
++ ieee80211_tx_info_clear_status(info);
+
+ if (status->acked)
+ info->flags |= IEEE80211_TX_STAT_ACK;
+- info->status.retry_count = status->frame_count - 1;
++
++ if (status->rts_count > dev->wl->hw->conf.short_frame_max_tx_count) {
++ /*
++ * If the short retries (RTS, not data frame) have exceeded
++ * the limit, the hw will not have tried the selected rate,
++ * but will have used the fallback rate instead.
++ * Don't let the rate control count attempts for the selected
++ * rate in this case, otherwise the statistics will be off.
++ */
++ info->status.rates[0].count = 0;
++ info->status.rates[1].count = status->frame_count;
++ } else {
++ if (status->frame_count > retry_limit) {
++ info->status.rates[0].count = retry_limit;
++ info->status.rates[1].count = status->frame_count -
++ retry_limit;
++
++ } else {
++ info->status.rates[0].count = status->frame_count;
++ info->status.rates[1].idx = -1;
++ }
++ }
+ ieee80211_tx_status_irqsafe(dev->wl->hw, packet->skb);
+ packet->skb = NULL;
+
+--- a/drivers/net/wireless/b43legacy/xmit.c
++++ b/drivers/net/wireless/b43legacy/xmit.c
+@@ -188,7 +188,7 @@ static int generate_txhdr_fw3(struct b43
+ struct b43legacy_txhdr_fw3 *txhdr,
+ const unsigned char *fragment_data,
+ unsigned int fragment_len,
+- const struct ieee80211_tx_info *info,
++ struct ieee80211_tx_info *info,
+ u16 cookie)
+ {
+ const struct ieee80211_hdr *wlhdr;
+@@ -201,6 +201,7 @@ static int generate_txhdr_fw3(struct b43
+ u32 mac_ctl = 0;
+ u16 phy_ctl = 0;
+ struct ieee80211_rate *tx_rate;
++ struct ieee80211_tx_rate *rates;
+
+ wlhdr = (const struct ieee80211_hdr *)fragment_data;
+
+@@ -274,7 +275,7 @@ static int generate_txhdr_fw3(struct b43
+ /* PHY TX Control word */
+ if (rate_ofdm)
+ phy_ctl |= B43legacy_TX4_PHY_OFDM;
+- if (dev->short_preamble)
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ phy_ctl |= B43legacy_TX4_PHY_SHORTPRMBL;
+ switch (info->antenna_sel_tx) {
+ case 0:
+@@ -291,6 +292,7 @@ static int generate_txhdr_fw3(struct b43
+ }
+
+ /* MAC control */
++ rates = info->control.rates;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+ mac_ctl |= B43legacy_TX4_MAC_ACK;
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+@@ -299,12 +301,22 @@ static int generate_txhdr_fw3(struct b43
+ mac_ctl |= B43legacy_TX4_MAC_STMSDU;
+ if (rate_fb_ofdm)
+ mac_ctl |= B43legacy_TX4_MAC_FALLBACKOFDM;
+- if (info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT)
++
++ /* Overwrite rates[0].count to make the retry calculation
++ * in the tx status easier. need the actual retry limit to
++ * detect whether the fallback rate was used.
++ */
++ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
++ (rates[0].count <= dev->wl->hw->conf.long_frame_max_tx_count)) {
++ rates[0].count = dev->wl->hw->conf.long_frame_max_tx_count;
+ mac_ctl |= B43legacy_TX4_MAC_LONGFRAME;
++ } else {
++ rates[0].count = dev->wl->hw->conf.short_frame_max_tx_count;
++ }
+
+ /* Generate the RTS or CTS-to-self frame */
+- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
+- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
++ if ((rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
++ (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)) {
+ unsigned int len;
+ struct ieee80211_hdr *hdr;
+ int rts_rate;
+@@ -319,7 +331,7 @@ static int generate_txhdr_fw3(struct b43
+ if (rts_rate_fb_ofdm)
+ mac_ctl |= B43legacy_TX4_MAC_CTSFALLBACKOFDM;
+
+- if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ if (rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ ieee80211_ctstoself_get(dev->wl->hw,
+ info->control.vif,
+ fragment_data,
+@@ -362,7 +374,7 @@ int b43legacy_generate_txhdr(struct b43l
+ u8 *txhdr,
+ const unsigned char *fragment_data,
+ unsigned int fragment_len,
+- const struct ieee80211_tx_info *info,
++ struct ieee80211_tx_info *info,
+ u16 cookie)
+ {
+ return generate_txhdr_fw3(dev, (struct b43legacy_txhdr_fw3 *)txhdr,
+--- a/drivers/net/wireless/b43legacy/xmit.h
++++ b/drivers/net/wireless/b43legacy/xmit.h
+@@ -80,7 +80,7 @@ int b43legacy_generate_txhdr(struct b43l
+ u8 *txhdr,
+ const unsigned char *fragment_data,
+ unsigned int fragment_len,
+- const struct ieee80211_tx_info *info,
++ struct ieee80211_tx_info *info,
+ u16 cookie);
+
+
+--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
++++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+@@ -422,34 +422,6 @@ static void rs_free_sta(void *priv, stru
+ }
+
+
+-/*
+- * get ieee prev rate from rate scale table.
+- * for A and B mode we need to overright prev
+- * value
+- */
+-static int rs_adjust_next_rate(struct iwl3945_priv *priv, int rate)
+-{
+- int next_rate = iwl3945_get_prev_ieee_rate(rate);
+-
+- switch (priv->band) {
+- case IEEE80211_BAND_5GHZ:
+- if (rate == IWL_RATE_12M_INDEX)
+- next_rate = IWL_RATE_9M_INDEX;
+- else if (rate == IWL_RATE_6M_INDEX)
+- next_rate = IWL_RATE_6M_INDEX;
+- break;
+-/* XXX cannot be invoked in current mac80211 so not a regression
+- case MODE_IEEE80211B:
+- if (rate == IWL_RATE_11M_INDEX_TABLE)
+- next_rate = IWL_RATE_5M_INDEX_TABLE;
+- break;
+- */
+- default:
+- break;
+- }
+-
+- return next_rate;
+-}
+ /**
+ * rs_tx_status - Update rate control values based on Tx results
+ *
+@@ -460,17 +432,21 @@ static void rs_tx_status(void *priv_rate
+ struct ieee80211_sta *sta, void *priv_sta,
+ struct sk_buff *skb)
+ {
+- u8 retries, current_count;
++ u8 retries = 0, current_count;
+ int scale_rate_index, first_index, last_index;
+ unsigned long flags;
+ struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_rate;
+ struct iwl3945_rs_sta *rs_sta = priv_sta;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
++ int i;
+
+ IWL_DEBUG_RATE("enter\n");
+
+- retries = info->status.retry_count;
+- first_index = sband->bitrates[info->tx_rate_idx].hw_value;
++ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++)
++ retries += info->status.rates[i].count;
++ retries--;
++
++ first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
+ if ((first_index < 0) || (first_index >= IWL_RATE_COUNT)) {
+ IWL_DEBUG_RATE("leave: Rate out of bounds: %d\n", first_index);
+ return;
+@@ -502,7 +478,7 @@ static void rs_tx_status(void *priv_rate
+ last_index = scale_rate_index;
+ } else {
+ current_count = priv->retry_rate;
+- last_index = rs_adjust_next_rate(priv,
++ last_index = iwl3945_rs_next_rate(priv,
+ scale_rate_index);
+ }
+
+@@ -518,7 +494,7 @@ static void rs_tx_status(void *priv_rate
+
+ if (retries)
+ scale_rate_index =
+- rs_adjust_next_rate(priv, scale_rate_index);
++ iwl3945_rs_next_rate(priv, scale_rate_index);
+ }
+
+
+@@ -630,10 +606,11 @@ static u16 iwl3945_get_adjacent_rate(str
+ * rate table and must reference the driver allocated rate table
+ *
+ */
+-static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband,
+- struct ieee80211_sta *sta, void *priv_sta,
+- struct sk_buff *skb, struct rate_selection *sel)
++static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
++ void *priv_sta, struct ieee80211_tx_rate_control *txrc)
+ {
++ struct ieee80211_supported_band *sband = txrc->sband;
++ struct sk_buff *skb = txrc->skb;
+ u8 low = IWL_RATE_INVALID;
+ u8 high = IWL_RATE_INVALID;
+ u16 high_low;
+@@ -649,6 +626,7 @@ static void rs_get_rate(void *priv_r, st
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ u16 fc, rate_mask;
+ struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ DECLARE_MAC_BUF(mac);
+
+ IWL_DEBUG_RATE("enter\n");
+@@ -660,7 +638,7 @@ static void rs_get_rate(void *priv_r, st
+ is_multicast_ether_addr(hdr->addr1) ||
+ !sta || !priv_sta) {
+ IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
+- sel->rate_idx = rate_lowest_index(sband, sta);
++ info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ return;
+ }
+
+@@ -793,9 +771,10 @@ static void rs_get_rate(void *priv_r, st
+
+ rs_sta->last_txrate_idx = index;
+ if (sband->band == IEEE80211_BAND_5GHZ)
+- sel->rate_idx = rs_sta->last_txrate_idx - IWL_FIRST_OFDM_RATE;
++ info->control.rates[0].idx = rs_sta->last_txrate_idx -
++ IWL_FIRST_OFDM_RATE;
+ else
+- sel->rate_idx = rs_sta->last_txrate_idx;
++ info->control.rates[0].idx = rs_sta->last_txrate_idx;
+
+ IWL_DEBUG_RATE("leave: %d\n", index);
+ }
+--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
++++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
+@@ -261,6 +261,35 @@ static inline const char *iwl3945_get_tx
+ }
+ #endif
+
++/*
++ * get ieee prev rate from rate scale table.
++ * for A and B mode we need to overright prev
++ * value
++ */
++int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate)
++{
++ int next_rate = iwl3945_get_prev_ieee_rate(rate);
++
++ switch (priv->band) {
++ case IEEE80211_BAND_5GHZ:
++ if (rate == IWL_RATE_12M_INDEX)
++ next_rate = IWL_RATE_9M_INDEX;
++ else if (rate == IWL_RATE_6M_INDEX)
++ next_rate = IWL_RATE_6M_INDEX;
++ break;
++/* XXX cannot be invoked in current mac80211 so not a regression
++ case MODE_IEEE80211B:
++ if (rate == IWL_RATE_11M_INDEX_TABLE)
++ next_rate = IWL_RATE_5M_INDEX_TABLE;
++ break;
++ */
++ default:
++ break;
++ }
++
++ return next_rate;
++}
++
+
+ /**
+ * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
+@@ -308,6 +337,7 @@ static void iwl3945_rx_reply_tx(struct i
+ struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
+ u32 status = le32_to_cpu(tx_resp->status);
+ int rate_idx;
++ int fail, i;
+
+ if ((index >= txq->q.n_bd) || (iwl3945_x2_queue_used(&txq->q, index) == 0)) {
+ IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
+@@ -318,9 +348,33 @@ static void iwl3945_rx_reply_tx(struct i
+ }
+
+ info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
++
++ /* Fill the MRR chain with some info about on-chip retransmissions */
++ rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
++ if (info->band == IEEE80211_BAND_5GHZ)
++ rate_idx -= IWL_FIRST_OFDM_RATE;
++
++ info->status.rates[0].count = tx_resp->failure_frame + 1;
++ fail = tx_resp->failure_frame;
++ for(i = 0; i < 4; i++) {
++ int next = iwl3945_rs_next_rate(priv, rate_idx);
++
++ info->status.rates[i].idx = rate_idx;
++
++ if ((rate_idx == next) || (i == 3)) {
++ info->status.rates[i].count = fail;
++ break;
++ }
++
++ info->status.rates[i].count = priv->retry_rate;
++ fail -= priv->retry_rate;
++ rate_idx = next;
++ if (fail <= 0)
++ break;
++ }
++ info->status.rates[i].count++; /* add final attempt */
+
+- info->status.retry_count = tx_resp->failure_frame;
+ /* tx_status->rts_retry_count = tx_resp->failure_rts; */
+ info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
+ IEEE80211_TX_STAT_ACK : 0;
+@@ -329,10 +383,6 @@ static void iwl3945_rx_reply_tx(struct i
+ txq_id, iwl3945_get_tx_fail_reason(status), status,
+ tx_resp->rate, tx_resp->failure_frame);
+
+- rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
+- if (info->band == IEEE80211_BAND_5GHZ)
+- rate_idx -= IWL_FIRST_OFDM_RATE;
+- info->tx_rate_idx = rate_idx;
+ IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
+ iwl3945_tx_queue_reclaim(priv, txq_id, index);
+
+--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
++++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
+@@ -954,6 +954,8 @@ static inline int is_channel_ibss(const
+ extern const struct iwl3945_channel_info *iwl3945_get_channel_info(
+ const struct iwl3945_priv *priv, enum ieee80211_band band, u16 channel);
+
++extern int iwl3945_rs_next_rate(struct iwl3945_priv *priv, int rate);
++
+ /* Requires full declaration of iwl3945_priv before including */
+ #include "iwl-3945-io.h"
+
+--- a/drivers/net/wireless/iwlwifi/iwl-core.c
++++ b/drivers/net/wireless/iwlwifi/iwl-core.c
+@@ -88,26 +88,27 @@ EXPORT_SYMBOL(iwl_rates);
+ * translate ucode response to mac80211 tx status control values
+ */
+ void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
+- struct ieee80211_tx_info *control)
++ struct ieee80211_tx_info *info)
+ {
+ int rate_index;
++ struct ieee80211_tx_rate *r = &info->control.rates[0];
+
+- control->antenna_sel_tx =
++ info->antenna_sel_tx =
+ ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
+ if (rate_n_flags & RATE_MCS_HT_MSK)
+- control->flags |= IEEE80211_TX_CTL_OFDM_HT;
++ r->flags |= IEEE80211_TX_RC_MCS;
+ if (rate_n_flags & RATE_MCS_GF_MSK)
+- control->flags |= IEEE80211_TX_CTL_GREEN_FIELD;
++ r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
+ if (rate_n_flags & RATE_MCS_FAT_MSK)
+- control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH;
++ r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ if (rate_n_flags & RATE_MCS_DUP_MSK)
+- control->flags |= IEEE80211_TX_CTL_DUP_DATA;
++ r->flags |= IEEE80211_TX_RC_DUP_DATA;
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+- control->flags |= IEEE80211_TX_CTL_SHORT_GI;
++ r->flags |= IEEE80211_TX_RC_SHORT_GI;
+ rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
+- if (control->band == IEEE80211_BAND_5GHZ)
++ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_index -= IWL_FIRST_OFDM_RATE;
+- control->tx_rate_idx = rate_index;
++ r->idx = rate_index;
+ }
+ EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
+
+--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
++++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
+@@ -2397,6 +2397,7 @@ static void iwl3945_build_tx_cmd_basic(s
+ {
+ __le16 fc = hdr->frame_control;
+ __le32 tx_flags = cmd->cmd.tx.tx_flags;
++ u8 rc_flags = info->control.rates[0].flags;
+
+ cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+@@ -2423,10 +2424,10 @@ static void iwl3945_build_tx_cmd_basic(s
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
++ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ tx_flags |= TX_CMD_FLG_RTS_MSK;
+ tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ tx_flags |= TX_CMD_FLG_CTS_MSK;
+ }
+--- a/drivers/net/wireless/mac80211_hwsim.c
++++ b/drivers/net/wireless/mac80211_hwsim.c
+@@ -209,7 +209,7 @@ static bool mac80211_hwsim_tx_frame(stru
+ /* TODO: set mactime */
+ rx_status.freq = data->channel->center_freq;
+ rx_status.band = data->channel->band;
+- rx_status.rate_idx = info->tx_rate_idx;
++ rx_status.rate_idx = info->control.rates[0].idx;
+ /* TODO: simulate signal strength (and optional packet drop) */
+
+ /* Copy skb to all enabled radios that are on the current frequency */
+@@ -269,13 +269,9 @@ static int mac80211_hwsim_tx(struct ieee
+ if (txi->control.sta)
+ hwsim_check_sta_magic(txi->control.sta);
+
+- memset(&txi->status, 0, sizeof(txi->status));
+- if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK)) {
+- if (ack)
+- txi->flags |= IEEE80211_TX_STAT_ACK;
+- else
+- txi->status.excessive_retries = 1;
+- }
++ ieee80211_tx_info_clear_status(txi);
++ if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK) && ack)
++ txi->flags |= IEEE80211_TX_STAT_ACK;
+ ieee80211_tx_status_irqsafe(hw, skb);
+ return NETDEV_TX_OK;
+ }
+--- a/drivers/net/wireless/rtl8180_dev.c
++++ b/drivers/net/wireless/rtl8180_dev.c
+@@ -182,15 +182,13 @@ static void rtl8180_handle_tx(struct iee
+ skb->len, PCI_DMA_TODEVICE);
+
+ info = IEEE80211_SKB_CB(skb);
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
+
+- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+- if (flags & RTL818X_TX_DESC_FLAG_TX_OK)
+- info->flags |= IEEE80211_TX_STAT_ACK;
+- else
+- info->status.excessive_retries = 1;
+- }
+- info->status.retry_count = flags & 0xFF;
++ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
++ (flags & RTL818X_TX_DESC_FLAG_TX_OK))
++ info->flags |= IEEE80211_TX_STAT_ACK;
++
++ info->status.rates[0].count = (flags & 0xFF) + 1;
+
+ ieee80211_tx_status_irqsafe(dev, skb);
+ if (ring->entries - skb_queue_len(&ring->queue) == 2)
+@@ -243,6 +241,7 @@ static int rtl8180_tx(struct ieee80211_h
+ unsigned int idx, prio;
+ dma_addr_t mapping;
+ u32 tx_flags;
++ u8 rc_flags;
+ u16 plcp_len = 0;
+ __le16 rts_duration = 0;
+
+@@ -261,15 +260,16 @@ static int rtl8180_tx(struct ieee80211_h
+ tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
+ RTL818X_TX_DESC_FLAG_NO_ENC;
+
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
++ rc_flags = info->control.rates[0].flags;
++ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
+ tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
+ tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+ }
+
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
++ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
+ rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
+ info);
+
+@@ -292,9 +292,9 @@ static int rtl8180_tx(struct ieee80211_h
+ entry->plcp_len = cpu_to_le16(plcp_len);
+ entry->tx_buf = cpu_to_le32(mapping);
+ entry->frame_len = cpu_to_le32(skb->len);
+- entry->flags2 = info->control.retries[0].rate_idx >= 0 ?
++ entry->flags2 = info->control.rates[1].idx >= 0 ?
+ ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
+- entry->retry_limit = info->control.retry_limit;
++ entry->retry_limit = info->control.rates[0].count;
+ entry->flags = cpu_to_le32(tx_flags);
+ __skb_queue_tail(&ring->queue, skb);
+ if (ring->entries - skb_queue_len(&ring->queue) < 2)
+@@ -856,7 +856,7 @@ static int __devinit rtl8180_probe(struc
+ priv = dev->priv;
+ priv->pdev = pdev;
+
+- dev->max_altrates = 1;
++ dev->max_rates = 2;
+ SET_IEEE80211_DEV(dev, &pdev->dev);
+ pci_set_drvdata(pdev, dev);
+
+--- a/drivers/net/wireless/rtl8187_dev.c
++++ b/drivers/net/wireless/rtl8187_dev.c
+@@ -163,7 +163,7 @@ static void rtl8187_tx_cb(struct urb *ur
+ usb_free_urb(info->driver_data[1]);
+ skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
+ sizeof(struct rtl8187_tx_hdr));
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ ieee80211_tx_status_irqsafe(hw, skb);
+ }
+@@ -192,12 +192,12 @@ static int rtl8187_tx(struct ieee80211_h
+ flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24;
+ if (ieee80211_has_morefrags(((struct ieee80211_hdr *)skb->data)->frame_control))
+ flags |= RTL818X_TX_DESC_FLAG_MOREFRAG;
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ flags |= RTL818X_TX_DESC_FLAG_RTS;
+ flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+ rts_dur = ieee80211_rts_duration(dev, priv->vif,
+ skb->len, info);
+- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ flags |= RTL818X_TX_DESC_FLAG_CTS;
+ flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
+ }
+@@ -208,7 +208,7 @@ static int rtl8187_tx(struct ieee80211_h
+ hdr->flags = cpu_to_le32(flags);
+ hdr->len = 0;
+ hdr->rts_duration = rts_dur;
+- hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
++ hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
+ buf = hdr;
+
+ ep = 2;
+@@ -226,7 +226,7 @@ static int rtl8187_tx(struct ieee80211_h
+ memset(hdr, 0, sizeof(*hdr));
+ hdr->flags = cpu_to_le32(flags);
+ hdr->rts_duration = rts_dur;
+- hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
++ hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8);
+ hdr->tx_duration =
+ ieee80211_generic_frame_duration(dev, priv->vif,
+ skb->len, txrate);
+--- a/drivers/net/wireless/p54/p54common.c
++++ b/drivers/net/wireless/p54/p54common.c
+@@ -577,7 +577,7 @@ static void p54_rx_frame_sent(struct iee
+ __skb_unlink(entry, &priv->tx_queue);
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+
+- memset(&info->status, 0, sizeof(info->status));
++ ieee80211_tx_info_clear_status(info);
+ entry_hdr = (struct p54_control_hdr *) entry->data;
+ entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
+ if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
+@@ -587,10 +587,8 @@ static void p54_rx_frame_sent(struct iee
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ if (!(payload->status & 0x01))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+- else
+- info->status.excessive_retries = 1;
+ }
+- info->status.retry_count = payload->retries - 1;
++ info->status.rates[0].count = payload->retries;
+ info->status.ack_signal = p54_rssi_to_dbm(dev,
+ le16_to_cpu(payload->ack_rssi));
+ skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
+@@ -816,6 +814,7 @@ static int p54_tx(struct ieee80211_hw *d
+ size_t padding, len;
+ u8 rate;
+ u8 cts_rate = 0x20;
++ u8 rc_flags;
+
+ current_queue = &priv->tx_stats[skb_get_queue_mapping(skb) + 4];
+ if (unlikely(current_queue->len > current_queue->limit))
+@@ -838,18 +837,19 @@ static int p54_tx(struct ieee80211_hw *d
+ hdr->magic1 = cpu_to_le16(0x0010);
+ hdr->len = cpu_to_le16(len);
+ hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
+- hdr->retry1 = hdr->retry2 = info->control.retry_limit;
++ hdr->retry1 = hdr->retry2 = info->control.rates[0].count;
+
+ /* TODO: add support for alternate retry TX rates */
+ rate = ieee80211_get_tx_rate(dev, info)->hw_value;
+- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) {
++ rc_flags = info->control.rates[0].flags;
++ if (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) {
+ rate |= 0x10;
+ cts_rate |= 0x10;
+ }
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
++ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ rate |= 0x40;
+ cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ rate |= 0x20;
+ cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+ }
+--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
++++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
+@@ -619,10 +619,10 @@ static void iwl4965_gain_computation(str
+ static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+ __le32 *tx_flags)
+ {
+- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
++ if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ *tx_flags |= TX_CMD_FLG_RTS_MSK;
+ *tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+- } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
++ } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ *tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ *tx_flags |= TX_CMD_FLG_CTS_MSK;
+ }
+@@ -2070,7 +2070,7 @@ static int iwl4965_tx_status_reply_tx(st
+ agg->frame_count, agg->start_idx, idx);
+
+ info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
+- info->status.retry_count = tx_resp->failure_frame;
++ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ info->flags |= iwl_is_tx_success(status)?
+ IEEE80211_TX_STAT_ACK : 0;
+@@ -2227,7 +2227,7 @@ static void iwl4965_rx_reply_tx(struct i
+ iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+ }
+ } else {
+- info->status.retry_count = tx_resp->failure_frame;
++ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags |=
+ iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0;
+ iwl_hwrate_to_tx_control(priv,
+--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
++++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
+@@ -390,8 +390,8 @@ static void iwl5000_chain_noise_reset(st
+ static void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+ __le32 *tx_flags)
+ {
+- if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
+- (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
++ if ((info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
++ (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
+ *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK;
+ else
+ *tx_flags &= ~TX_CMD_FLG_RTS_CTS_MSK;
+@@ -1136,7 +1136,7 @@ static int iwl5000_tx_status_reply_tx(st
+ agg->frame_count, agg->start_idx, idx);
+
+ info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
+- info->status.retry_count = tx_resp->failure_frame;
++ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ info->flags |= iwl_is_tx_success(status)?
+ IEEE80211_TX_STAT_ACK : 0;
+@@ -1289,7 +1289,7 @@ static void iwl5000_rx_reply_tx(struct i
+ iwl_txq_check_empty(priv, sta_id, tid, txq_id);
+ }
+ } else {
+- info->status.retry_count = tx_resp->failure_frame;
++ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags =
+ iwl_is_tx_success(status) ? IEEE80211_TX_STAT_ACK : 0;
+ iwl_hwrate_to_tx_control(priv,
+--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
++++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+@@ -800,7 +800,7 @@ static void rs_tx_status(void *priv_r, s
+ !(info->flags & IEEE80211_TX_STAT_AMPDU))
+ return;
+
+- retries = info->status.retry_count;
++ retries = info->status.rates[0].count + 1;
+
+ if (retries > 15)
+ retries = 15;
+@@ -832,20 +832,15 @@ static void rs_tx_status(void *priv_r, s
+ if (priv->band == IEEE80211_BAND_5GHZ)
+ rs_index -= IWL_FIRST_OFDM_RATE;
+
+- if ((info->tx_rate_idx < 0) ||
+- (tbl_type.is_SGI ^
+- !!(info->flags & IEEE80211_TX_CTL_SHORT_GI)) ||
+- (tbl_type.is_fat ^
+- !!(info->flags & IEEE80211_TX_CTL_40_MHZ_WIDTH)) ||
+- (tbl_type.is_dup ^
+- !!(info->flags & IEEE80211_TX_CTL_DUP_DATA)) ||
+- (tbl_type.ant_type ^ info->antenna_sel_tx) ||
+- (!!(tx_rate & RATE_MCS_HT_MSK) ^
+- !!(info->flags & IEEE80211_TX_CTL_OFDM_HT)) ||
+- (!!(tx_rate & RATE_MCS_GF_MSK) ^
+- !!(info->flags & IEEE80211_TX_CTL_GREEN_FIELD)) ||
++ if ((info->status.rates[0].idx < 0) ||
++ (tbl_type.is_SGI != !!(info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)) ||
++ (tbl_type.is_fat != !!(info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
++ (tbl_type.is_dup != !!(info->status.rates[0].flags & IEEE80211_TX_RC_DUP_DATA)) ||
++ (tbl_type.ant_type != info->antenna_sel_tx) ||
++ (!!(tx_rate & RATE_MCS_HT_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) ||
++ (!!(tx_rate & RATE_MCS_GF_MSK) != !!(info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
+ (hw->wiphy->bands[priv->band]->bitrates[rs_index].bitrate !=
+- hw->wiphy->bands[info->band]->bitrates[info->tx_rate_idx].bitrate)) {
++ hw->wiphy->bands[info->band]->bitrates[info->status.rates[0].idx].bitrate)) {
+ IWL_DEBUG_RATE("initial rate does not match 0x%x\n", tx_rate);
+ goto out;
+ }
+@@ -2103,15 +2098,17 @@ static void rs_initialize_lq(struct iwl_
+ return;
+ }
+
+-static void rs_get_rate(void *priv_r, struct ieee80211_supported_band *sband,
+- struct ieee80211_sta *sta, void *priv_sta,
+- struct sk_buff *skb, struct rate_selection *sel)
++static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
++ struct ieee80211_tx_rate_control *txrc)
+ {
+
+ int i;
++ struct sk_buff *skb = txrc->skb;
++ struct ieee80211_supported_band *sband = txrc->sband;
+ struct iwl_priv *priv = (struct iwl_priv *)priv_r;
+ struct ieee80211_conf *conf = &priv->hw->conf;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
++ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ __le16 fc;
+ struct iwl_lq_sta *lq_sta;
+
+@@ -2122,7 +2119,7 @@ static void rs_get_rate(void *priv_r, st
+ fc = hdr->frame_control;
+ if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
+ !sta || !priv_sta) {
+- sel->rate_idx = rate_lowest_index(sband, sta);
++ info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ return;
+ }
+
+@@ -2149,13 +2146,13 @@ static void rs_get_rate(void *priv_r, st
+ }
+
+ if ((i < 0) || (i > IWL_RATE_COUNT)) {
+- sel->rate_idx = rate_lowest_index(sband, sta);
++ info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ return;
+ }
+
+ if (sband->band == IEEE80211_BAND_5GHZ)
+ i -= IWL_FIRST_OFDM_RATE;
+- sel->rate_idx = i;
++ info->control.rates[0].idx = i;
+ }
+
+ static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
--- /dev/null
+This patch enhances minstrel's performance for non-MRR setups,
+by preventing it from sampling slower rates with >95% success
+probability and by putting at least 1 non-sample frame between
+several sample frames.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/net/mac80211/rc80211_minstrel.c
++++ b/net/mac80211/rc80211_minstrel.c
+@@ -126,7 +126,9 @@ minstrel_update_stats(struct minstrel_pr
+ mr->adjusted_retry_count = mr->retry_count >> 1;
+ if (mr->adjusted_retry_count > 2)
+ mr->adjusted_retry_count = 2;
++ mr->sample_limit = 4;
+ } else {
++ mr->sample_limit = -1;
+ mr->adjusted_retry_count = mr->retry_count;
+ }
+ if (!mr->adjusted_retry_count)
+@@ -265,7 +267,8 @@ minstrel_get_rate(void *priv, struct iee
+ (mi->sample_count + mi->sample_deferred / 2);
+
+ /* delta > 0: sampling required */
+- if (delta > 0) {
++ if ((delta > 0) && (mrr || !mi->prev_sample)) {
++ struct minstrel_rate *msr;
+ if (mi->packet_count >= 10000) {
+ mi->sample_deferred = 0;
+ mi->sample_count = 0;
+@@ -284,13 +287,20 @@ minstrel_get_rate(void *priv, struct iee
+ }
+
+ sample_ndx = minstrel_get_next_sample(mi);
++ msr = &mi->r[sample_ndx];
+ sample = true;
+- sample_slower = mrr && (mi->r[sample_ndx].perfect_tx_time >
++ sample_slower = mrr && (msr->perfect_tx_time >
+ mi->r[ndx].perfect_tx_time);
+
+ if (!sample_slower) {
+- ndx = sample_ndx;
+- mi->sample_count++;
++ if (msr->sample_limit != 0) {
++ ndx = sample_ndx;
++ mi->sample_count++;
++ if (msr->sample_limit > 0)
++ msr->sample_limit--;
++ } else {
++ sample = false;
++ }
+ } else {
+ /* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark
+ * packets that have the sampling rate deferred to the
+@@ -302,10 +312,20 @@ minstrel_get_rate(void *priv, struct iee
+ mi->sample_deferred++;
+ }
+ }
++ mi->prev_sample = sample;
++
++ /* If we're not using MRR and the sampling rate already
++ * has a probability of >95%, we shouldn't be attempting
++ * to use it, as this only wastes precious airtime */
++ if (!mrr && sample && (mi->r[ndx].probability > 17100))
++ ndx = mi->max_tp_rate;
++
+ ar[0].idx = mi->r[ndx].rix;
+ ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info);
+
+ if (!mrr) {
++ if (!sample)
++ ar[0].count = mp->max_retry;
+ ar[1].idx = mi->lowest_rix;
+ ar[1].count = mp->max_retry;
+ return;
+@@ -401,6 +421,7 @@ minstrel_rate_init(void *priv, struct ie
+
+ /* calculate maximum number of retransmissions before
+ * fallback (based on maximum segment size) */
++ mr->sample_limit = -1;
+ mr->retry_count = 1;
+ mr->retry_count_cts = 1;
+ mr->retry_count_rtscts = 1;
+--- a/net/mac80211/rc80211_minstrel.h
++++ b/net/mac80211/rc80211_minstrel.h
+@@ -16,6 +16,7 @@ struct minstrel_rate {
+ unsigned int perfect_tx_time;
+ unsigned int ack_time;
+
++ int sample_limit;
+ unsigned int retry_count;
+ unsigned int retry_count_cts;
+ unsigned int retry_count_rtscts;
+@@ -57,6 +58,7 @@ struct minstrel_sta_info {
+
+ int n_rates;
+ struct minstrel_rate *r;
++ bool prev_sample;
+
+ /* sampling table */
+ u8 *sample_table;
projects / openwrt / staging / robimarko.git / commitdiff