#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/control.h>
.size = YDSXG_CTRLLENGTH,
.data = (u8 *)CntrlInst1E,
};
+
+#ifdef __BIG_ENDIAN
+static int microcode_swapped;
+static DEFINE_MUTEX(microcode_swap);
+
+static void snd_ymfpci_convert_to_le(const struct firmware *fw)
+{
+ int i;
+ u32 *data = (u32 *)fw->data;
+
+ for (i = 0; i < fw->size / 4; ++i)
+ cpu_to_le32s(&data[i]);
+}
#endif
-#ifdef CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL
static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
{
+#ifdef __BIG_ENDIAN
+ mutex_lock(µcode_swap);
+ if (!microcode_swapped) {
+ snd_ymfpci_convert_to_le(&snd_ymfpci_dsp_microcode);
+ snd_ymfpci_convert_to_le(&snd_ymfpci_controller_1e_microcode);
+ snd_ymfpci_convert_to_le(&snd_ymfpci_controller_microcode);
+ microcode_swapped = 1;
+ }
+ mutex_unlock(µcode_swap);
+#endif
+
chip->dsp_microcode = &snd_ymfpci_dsp_microcode;
if (chip->device_id == PCI_DEVICE_ID_YAMAHA_724F ||
chip->device_id == PCI_DEVICE_ID_YAMAHA_740C ||
#else /* use fw_loader */
-#ifdef __LITTLE_ENDIAN
-static inline void snd_ymfpci_convert_from_le(const struct firmware *fw) { }
-#else
-static void snd_ymfpci_convert_from_le(const struct firmware *fw)
-{
- int i;
- u32 *data = (u32 *)fw->data;
-
- for (i = 0; i < fw->size / 4; ++i)
- le32_to_cpus(&data[i]);
-}
-#endif
-
static int snd_ymfpci_request_firmware(struct snd_ymfpci *chip)
{
int err, is_1e;
err = request_firmware(&chip->dsp_microcode, "yamaha/ds1_dsp.fw",
&chip->pci->dev);
if (err >= 0) {
- if (chip->dsp_microcode->size == YDSXG_DSPLENGTH)
- snd_ymfpci_convert_from_le(chip->dsp_microcode);
- else {
+ if (chip->dsp_microcode->size != YDSXG_DSPLENGTH) {
snd_printk(KERN_ERR "DSP microcode has wrong size\n");
err = -EINVAL;
}
err = request_firmware(&chip->controller_microcode, name,
&chip->pci->dev);
if (err >= 0) {
- if (chip->controller_microcode->size == YDSXG_CTRLLENGTH)
- snd_ymfpci_convert_from_le(chip->controller_microcode);
- else {
+ if (chip->controller_microcode->size != YDSXG_CTRLLENGTH) {
snd_printk(KERN_ERR "controller microcode"
" has wrong size\n");
err = -EINVAL;
{
int i;
u16 ctrl;
- u32 *inst;
+ const __le32 *inst;
snd_ymfpci_writel(chip, YDSXGR_NATIVEDACOUTVOL, 0x00000000);
snd_ymfpci_disable_dsp(chip);
snd_ymfpci_writew(chip, YDSXGR_GLOBALCTRL, ctrl & ~0x0007);
/* setup DSP instruction code */
- inst = (u32 *)chip->dsp_microcode->data;
+ inst = (const __le32 *)chip->dsp_microcode->data;
for (i = 0; i < YDSXG_DSPLENGTH / 4; i++)
- snd_ymfpci_writel(chip, YDSXGR_DSPINSTRAM + (i << 2), inst[i]);
+ snd_ymfpci_writel(chip, YDSXGR_DSPINSTRAM + (i << 2),
+ le32_to_cpu(inst[i]));
/* setup control instruction code */
- inst = (u32 *)chip->controller_microcode->data;
+ inst = (const __le32 *)chip->controller_microcode->data;
for (i = 0; i < YDSXG_CTRLLENGTH / 4; i++)
- snd_ymfpci_writel(chip, YDSXGR_CTRLINSTRAM + (i << 2), inst[i]);
+ snd_ymfpci_writel(chip, YDSXGR_CTRLINSTRAM + (i << 2),
+ le32_to_cpu(inst[i]));
snd_ymfpci_enable_dsp(chip);
}