};
};
+&scm {
+ qcom,sdi-enabled;
+};
+
&tlmm {
fw_pinmux: fw_pinmux {
wp {
--- /dev/null
+From ff4aa3bc98258a240b9bbab53fd8d2fb8184c485 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Wed, 16 Aug 2023 18:45:39 +0200
+Subject: [PATCH] firmware: qcom_scm: disable SDI if required
+
+IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
+means that WDT being asserted or just trying to reboot will hang the board
+in the debug mode and only pulling the power and repowering will help.
+Some IPQ4019 boards like Google WiFI have it enabled as well.
+
+Luckily, SDI can be disabled via an SCM call.
+
+So, lets use the boolean DT property to identify boards that have SDI
+enabled by default and use the SCM call to disable SDI during SCM probe.
+It is important to disable it as soon as possible as we might have a WDT
+assertion at any time which would then leave the board in debug mode,
+thus disabling it during SCM removal is not enough.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
+Link: https://lore.kernel.org/r/20230816164641.3371878-2-robimarko@gmail.com
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+---
+ drivers/firmware/qcom_scm.c | 30 ++++++++++++++++++++++++++++++
+ drivers/firmware/qcom_scm.h | 1 +
+ 2 files changed, 31 insertions(+)
+
+--- a/drivers/firmware/qcom_scm.c
++++ b/drivers/firmware/qcom_scm.c
+@@ -400,6 +400,29 @@ int qcom_scm_set_remote_state(u32 state,
+ }
+ EXPORT_SYMBOL(qcom_scm_set_remote_state);
+
++static int qcom_scm_disable_sdi(void)
++{
++ int ret;
++ struct qcom_scm_desc desc = {
++ .svc = QCOM_SCM_SVC_BOOT,
++ .cmd = QCOM_SCM_BOOT_SDI_CONFIG,
++ .args[0] = 1, /* Disable watchdog debug */
++ .args[1] = 0, /* Disable SDI */
++ .arginfo = QCOM_SCM_ARGS(2),
++ .owner = ARM_SMCCC_OWNER_SIP,
++ };
++ struct qcom_scm_res res;
++
++ ret = qcom_scm_clk_enable();
++ if (ret)
++ return ret;
++ ret = qcom_scm_call(__scm->dev, &desc, &res);
++
++ qcom_scm_clk_disable();
++
++ return ret ? : res.result[0];
++}
++
+ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+ {
+ struct qcom_scm_desc desc = {
+@@ -1404,6 +1427,13 @@ static int qcom_scm_probe(struct platfor
+
+ __get_convention();
+
++
++ /*
++ * Disable SDI if indicated by DT that it is enabled by default.
++ */
++ if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled"))
++ qcom_scm_disable_sdi();
++
+ /*
+ * If requested enable "download mode", from this point on warmboot
+ * will cause the boot stages to enter download mode, unless
+--- a/drivers/firmware/qcom_scm.h
++++ b/drivers/firmware/qcom_scm.h
+@@ -77,6 +77,7 @@ extern int scm_legacy_call(struct device
+ #define QCOM_SCM_SVC_BOOT 0x01
+ #define QCOM_SCM_BOOT_SET_ADDR 0x01
+ #define QCOM_SCM_BOOT_TERMINATE_PC 0x02
++#define QCOM_SCM_BOOT_SDI_CONFIG 0x09
+ #define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
+ #define QCOM_SCM_BOOT_SET_ADDR_MC 0x11
+ #define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
--- /dev/null
+From ea9fba16d972becc84cd2a82d25030975dc609a5 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Sat, 30 Sep 2023 13:09:27 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: add label to SCM
+
+Some IPQ4019 boards require SDI to be disabled by adding a property to the
+SCM node, so lets make that easy by adding a label to the SCM node.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -155,7 +155,7 @@
+ };
+
+ firmware {
+- scm {
++ scm: scm {
+ compatible = "qcom,scm-ipq4019", "qcom,scm";
+ };
+ };
+++ /dev/null
-From b514bc3c0a5a57bc83843dc66c72788b9c9435ac Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 18 May 2023 16:02:23 +0200
-Subject: [PATCH 1/3] firmware: qcom: scm: Add SDI disable support
-
-Some SoC-s like IPQ5018 require SDI(Secure Debug Image) to be disabled
-before trying to reboot, otherwise board will just hang after reboot has
-been issued via PSCI.
-
-So, provide a call to SCM that allows disabling it.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
----
- drivers/firmware/qcom_scm.c | 23 +++++++++++++++++++++++
- drivers/firmware/qcom_scm.h | 1 +
- 2 files changed, 24 insertions(+)
-
---- a/drivers/firmware/qcom_scm.c
-+++ b/drivers/firmware/qcom_scm.c
-@@ -400,6 +400,29 @@ int qcom_scm_set_remote_state(u32 state,
- }
- EXPORT_SYMBOL(qcom_scm_set_remote_state);
-
-+static int qcom_scm_disable_sdi(void)
-+{
-+ int ret;
-+ struct qcom_scm_desc desc = {
-+ .svc = QCOM_SCM_SVC_BOOT,
-+ .cmd = QCOM_SCM_BOOT_SDI_CONFIG,
-+ .args[0] = 1, /* Disable watchdog debug */
-+ .args[1] = 0, /* Disable SDI */
-+ .arginfo = QCOM_SCM_ARGS(2),
-+ .owner = ARM_SMCCC_OWNER_SIP,
-+ };
-+ struct qcom_scm_res res;
-+
-+ ret = qcom_scm_clk_enable();
-+ if (ret)
-+ return ret;
-+ ret = qcom_scm_call(__scm->dev, &desc, &res);
-+
-+ qcom_scm_clk_disable();
-+
-+ return ret ? : res.result[0];
-+}
-+
- static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
- {
- struct qcom_scm_desc desc = {
---- a/drivers/firmware/qcom_scm.h
-+++ b/drivers/firmware/qcom_scm.h
-@@ -77,6 +77,7 @@ extern int scm_legacy_call(struct device
- #define QCOM_SCM_SVC_BOOT 0x01
- #define QCOM_SCM_BOOT_SET_ADDR 0x01
- #define QCOM_SCM_BOOT_TERMINATE_PC 0x02
-+#define QCOM_SCM_BOOT_SDI_CONFIG 0x09
- #define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
- #define QCOM_SCM_BOOT_SET_ADDR_MC 0x11
- #define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
+++ /dev/null
-From a658ad57c2b9d46eb5395c7bb8cf83b8e0f289e7 Mon Sep 17 00:00:00 2001
-From: Brian Norris <computersforpeace@gmail.com>
-Date: Fri, 28 Jul 2023 12:02:19 +0200
-Subject: [PATCH 2/3] firmware: qcom: scm: disable SDI on Google WiFi
-
-Google WiFi seems to have SDI (Secure Debug Image) enabled by default which
-prevents normal reboot from working causing the board to just hang after
-reboot is called.
-
-So lets disable SDI during SCM probe on Google WiFi boards in order to
-avoid a state where WDT will kick in and then the board will just hang
-in the debug mode.
-
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
- drivers/firmware/qcom_scm.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/firmware/qcom_scm.c
-+++ b/drivers/firmware/qcom_scm.c
-@@ -1435,6 +1435,13 @@ static int qcom_scm_probe(struct platfor
- if (download_mode)
- qcom_scm_set_download_mode(true);
-
-+ /*
-+ * Factory firmware leaves SDI (a debug interface), which prevents
-+ * clean reboot.
-+ */
-+ if (of_machine_is_compatible("google,wifi"))
-+ qcom_scm_disable_sdi();
-+
- return 0;
- }
-
projects / openwrt / staging / dangole.git / commitdiff